[media] ivtv: remove open_id/id from the filehandle code
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / media / video / ivtv / ivtv-driver.c
blob461ae449cb433423ec64d9ed4bc13f5cb04903fe
1 /*
2 ivtv driver initialization and card probing
3 Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com>
4 Copyright (C) 2004 Chris Kennedy <c@groovy.org>
5 Copyright (C) 2005-2007 Hans Verkuil <hverkuil@xs4all.nl>
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 /* Main Driver file for the ivtv project:
23 * Driver for the Conexant CX23415/CX23416 chip.
24 * Author: Kevin Thayer (nufan_wfk at yahoo.com)
25 * License: GPL
26 * http://www.ivtvdriver.org
28 * -----
29 * MPG600/MPG160 support by T.Adachi <tadachi@tadachi-net.com>
30 * and Takeru KOMORIYA<komoriya@paken.org>
32 * AVerMedia M179 GPIO info by Chris Pinkham <cpinkham@bc2va.org>
33 * using information provided by Jiun-Kuei Jung @ AVerMedia.
35 * Kurouto Sikou CX23416GYC-STVLP tested by K.Ohta <alpha292@bremen.or.jp>
36 * using information from T.Adachi,Takeru KOMORIYA and others :-)
38 * Nagase TRANSGEAR 5000TV, Aopen VA2000MAX-STN6 and I/O data GV-MVP/RX
39 * version by T.Adachi. Special thanks Mr.Suzuki
42 #include "ivtv-driver.h"
43 #include "ivtv-version.h"
44 #include "ivtv-fileops.h"
45 #include "ivtv-i2c.h"
46 #include "ivtv-firmware.h"
47 #include "ivtv-queue.h"
48 #include "ivtv-udma.h"
49 #include "ivtv-irq.h"
50 #include "ivtv-mailbox.h"
51 #include "ivtv-streams.h"
52 #include "ivtv-ioctl.h"
53 #include "ivtv-cards.h"
54 #include "ivtv-vbi.h"
55 #include "ivtv-routing.h"
56 #include "ivtv-controls.h"
57 #include "ivtv-gpio.h"
59 #include <media/tveeprom.h>
60 #include <media/saa7115.h>
61 #include <media/v4l2-chip-ident.h>
62 #include "tuner-xc2028.h"
64 /* If you have already X v4l cards, then set this to X. This way
65 the device numbers stay matched. Example: you have a WinTV card
66 without radio and a PVR-350 with. Normally this would give a
67 video1 device together with a radio0 device for the PVR. By
68 setting this to 1 you ensure that radio0 is now also radio1. */
69 int ivtv_first_minor;
71 /* add your revision and whatnot here */
72 static struct pci_device_id ivtv_pci_tbl[] __devinitdata = {
73 {PCI_VENDOR_ID_ICOMP, PCI_DEVICE_ID_IVTV15,
74 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
75 {PCI_VENDOR_ID_ICOMP, PCI_DEVICE_ID_IVTV16,
76 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
77 {0,}
80 MODULE_DEVICE_TABLE(pci,ivtv_pci_tbl);
82 /* ivtv instance counter */
83 static atomic_t ivtv_instance = ATOMIC_INIT(0);
85 /* Parameter declarations */
86 static int cardtype[IVTV_MAX_CARDS];
87 static int tuner[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1,
88 -1, -1, -1, -1, -1, -1, -1, -1,
89 -1, -1, -1, -1, -1, -1, -1, -1,
90 -1, -1, -1, -1, -1, -1, -1, -1 };
91 static int radio[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1,
92 -1, -1, -1, -1, -1, -1, -1, -1,
93 -1, -1, -1, -1, -1, -1, -1, -1,
94 -1, -1, -1, -1, -1, -1, -1, -1 };
95 static int i2c_clock_period[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1,
96 -1, -1, -1, -1, -1, -1, -1, -1,
97 -1, -1, -1, -1, -1, -1, -1, -1,
98 -1, -1, -1, -1, -1, -1, -1, -1 };
100 static unsigned int cardtype_c = 1;
101 static unsigned int tuner_c = 1;
102 static unsigned int radio_c = 1;
103 static unsigned int i2c_clock_period_c = 1;
104 static char pal[] = "---";
105 static char secam[] = "--";
106 static char ntsc[] = "-";
108 /* Buffers */
110 /* DMA Buffers, Default size in MB allocated */
111 #define IVTV_DEFAULT_ENC_MPG_BUFFERS 4
112 #define IVTV_DEFAULT_ENC_YUV_BUFFERS 2
113 #define IVTV_DEFAULT_ENC_VBI_BUFFERS 1
114 /* Exception: size in kB for this stream (MB is overkill) */
115 #define IVTV_DEFAULT_ENC_PCM_BUFFERS 320
116 #define IVTV_DEFAULT_DEC_MPG_BUFFERS 1
117 #define IVTV_DEFAULT_DEC_YUV_BUFFERS 1
118 /* Exception: size in kB for this stream (MB is way overkill) */
119 #define IVTV_DEFAULT_DEC_VBI_BUFFERS 64
121 static int enc_mpg_buffers = IVTV_DEFAULT_ENC_MPG_BUFFERS;
122 static int enc_yuv_buffers = IVTV_DEFAULT_ENC_YUV_BUFFERS;
123 static int enc_vbi_buffers = IVTV_DEFAULT_ENC_VBI_BUFFERS;
124 static int enc_pcm_buffers = IVTV_DEFAULT_ENC_PCM_BUFFERS;
125 static int dec_mpg_buffers = IVTV_DEFAULT_DEC_MPG_BUFFERS;
126 static int dec_yuv_buffers = IVTV_DEFAULT_DEC_YUV_BUFFERS;
127 static int dec_vbi_buffers = IVTV_DEFAULT_DEC_VBI_BUFFERS;
129 static int ivtv_yuv_mode;
130 static int ivtv_yuv_threshold = -1;
131 static int ivtv_pci_latency = 1;
133 int ivtv_debug;
134 #ifdef CONFIG_VIDEO_ADV_DEBUG
135 int ivtv_fw_debug;
136 #endif
138 static int tunertype = -1;
139 static int newi2c = -1;
141 module_param_array(tuner, int, &tuner_c, 0644);
142 module_param_array(radio, bool, &radio_c, 0644);
143 module_param_array(cardtype, int, &cardtype_c, 0644);
144 module_param_string(pal, pal, sizeof(pal), 0644);
145 module_param_string(secam, secam, sizeof(secam), 0644);
146 module_param_string(ntsc, ntsc, sizeof(ntsc), 0644);
147 module_param_named(debug,ivtv_debug, int, 0644);
148 #ifdef CONFIG_VIDEO_ADV_DEBUG
149 module_param_named(fw_debug, ivtv_fw_debug, int, 0644);
150 #endif
151 module_param(ivtv_pci_latency, int, 0644);
152 module_param(ivtv_yuv_mode, int, 0644);
153 module_param(ivtv_yuv_threshold, int, 0644);
154 module_param(ivtv_first_minor, int, 0644);
156 module_param(enc_mpg_buffers, int, 0644);
157 module_param(enc_yuv_buffers, int, 0644);
158 module_param(enc_vbi_buffers, int, 0644);
159 module_param(enc_pcm_buffers, int, 0644);
160 module_param(dec_mpg_buffers, int, 0644);
161 module_param(dec_yuv_buffers, int, 0644);
162 module_param(dec_vbi_buffers, int, 0644);
164 module_param(tunertype, int, 0644);
165 module_param(newi2c, int, 0644);
166 module_param_array(i2c_clock_period, int, &i2c_clock_period_c, 0644);
168 MODULE_PARM_DESC(tuner, "Tuner type selection,\n"
169 "\t\t\tsee tuner.h for values");
170 MODULE_PARM_DESC(radio,
171 "Enable or disable the radio. Use only if autodetection\n"
172 "\t\t\tfails. 0 = disable, 1 = enable");
173 MODULE_PARM_DESC(cardtype,
174 "Only use this option if your card is not detected properly.\n"
175 "\t\tSpecify card type:\n"
176 "\t\t\t 1 = WinTV PVR 250\n"
177 "\t\t\t 2 = WinTV PVR 350\n"
178 "\t\t\t 3 = WinTV PVR-150 or PVR-500\n"
179 "\t\t\t 4 = AVerMedia M179\n"
180 "\t\t\t 5 = YUAN MPG600/Kuroutoshikou iTVC16-STVLP\n"
181 "\t\t\t 6 = YUAN MPG160/Kuroutoshikou iTVC15-STVLP\n"
182 "\t\t\t 7 = YUAN PG600/DIAMONDMM PVR-550 (CX Falcon 2)\n"
183 "\t\t\t 8 = Adaptec AVC-2410\n"
184 "\t\t\t 9 = Adaptec AVC-2010\n"
185 "\t\t\t10 = NAGASE TRANSGEAR 5000TV\n"
186 "\t\t\t11 = AOpen VA2000MAX-STN6\n"
187 "\t\t\t12 = YUAN MPG600GR/Kuroutoshikou CX23416GYC-STVLP\n"
188 "\t\t\t13 = I/O Data GV-MVP/RX\n"
189 "\t\t\t14 = I/O Data GV-MVP/RX2E\n"
190 "\t\t\t15 = GOTVIEW PCI DVD\n"
191 "\t\t\t16 = GOTVIEW PCI DVD2 Deluxe\n"
192 "\t\t\t17 = Yuan MPC622\n"
193 "\t\t\t18 = Digital Cowboy DCT-MTVP1\n"
194 "\t\t\t19 = Yuan PG600V2/GotView PCI DVD Lite\n"
195 "\t\t\t20 = Club3D ZAP-TV1x01\n"
196 "\t\t\t21 = AverTV MCE 116 Plus\n"
197 "\t\t\t22 = ASUS Falcon2\n"
198 "\t\t\t23 = AverMedia PVR-150 Plus\n"
199 "\t\t\t24 = AverMedia EZMaker PCI Deluxe\n"
200 "\t\t\t25 = AverMedia M104 (not yet working)\n"
201 "\t\t\t26 = Buffalo PC-MV5L/PCI\n"
202 "\t\t\t27 = AVerMedia UltraTV 1500 MCE\n"
203 "\t\t\t28 = Sony VAIO Giga Pocket (ENX Kikyou)\n"
204 "\t\t\t 0 = Autodetect (default)\n"
205 "\t\t\t-1 = Ignore this card\n\t\t");
206 MODULE_PARM_DESC(pal, "Set PAL standard: BGH, DK, I, M, N, Nc, 60");
207 MODULE_PARM_DESC(secam, "Set SECAM standard: BGH, DK, L, LC");
208 MODULE_PARM_DESC(ntsc, "Set NTSC standard: M, J (Japan), K (South Korea)");
209 MODULE_PARM_DESC(tunertype,
210 "Specify tuner type:\n"
211 "\t\t\t 0 = tuner for PAL-B/G/H/D/K/I, SECAM-B/G/H/D/K/L/Lc\n"
212 "\t\t\t 1 = tuner for NTSC-M/J/K, PAL-M/N/Nc\n"
213 "\t\t\t-1 = Autodetect (default)\n");
214 MODULE_PARM_DESC(debug,
215 "Debug level (bitmask). Default: 0\n"
216 "\t\t\t 1/0x0001: warning\n"
217 "\t\t\t 2/0x0002: info\n"
218 "\t\t\t 4/0x0004: mailbox\n"
219 "\t\t\t 8/0x0008: ioctl\n"
220 "\t\t\t 16/0x0010: file\n"
221 "\t\t\t 32/0x0020: dma\n"
222 "\t\t\t 64/0x0040: irq\n"
223 "\t\t\t 128/0x0080: decoder\n"
224 "\t\t\t 256/0x0100: yuv\n"
225 "\t\t\t 512/0x0200: i2c\n"
226 "\t\t\t1024/0x0400: high volume\n");
227 #ifdef CONFIG_VIDEO_ADV_DEBUG
228 MODULE_PARM_DESC(fw_debug,
229 "Enable code for debugging firmware problems. Default: 0\n");
230 #endif
231 MODULE_PARM_DESC(ivtv_pci_latency,
232 "Change the PCI latency to 64 if lower: 0 = No, 1 = Yes,\n"
233 "\t\t\tDefault: Yes");
234 MODULE_PARM_DESC(ivtv_yuv_mode,
235 "Specify the yuv playback mode:\n"
236 "\t\t\t0 = interlaced\n\t\t\t1 = progressive\n\t\t\t2 = auto\n"
237 "\t\t\tDefault: 0 (interlaced)");
238 MODULE_PARM_DESC(ivtv_yuv_threshold,
239 "If ivtv_yuv_mode is 2 (auto) then playback content as\n\t\tprogressive if src height <= ivtv_yuvthreshold\n"
240 "\t\t\tDefault: 480");
241 MODULE_PARM_DESC(enc_mpg_buffers,
242 "Encoder MPG Buffers (in MB)\n"
243 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_MPG_BUFFERS));
244 MODULE_PARM_DESC(enc_yuv_buffers,
245 "Encoder YUV Buffers (in MB)\n"
246 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_YUV_BUFFERS));
247 MODULE_PARM_DESC(enc_vbi_buffers,
248 "Encoder VBI Buffers (in MB)\n"
249 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_VBI_BUFFERS));
250 MODULE_PARM_DESC(enc_pcm_buffers,
251 "Encoder PCM buffers (in kB)\n"
252 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_PCM_BUFFERS));
253 MODULE_PARM_DESC(dec_mpg_buffers,
254 "Decoder MPG buffers (in MB)\n"
255 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_MPG_BUFFERS));
256 MODULE_PARM_DESC(dec_yuv_buffers,
257 "Decoder YUV buffers (in MB)\n"
258 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_YUV_BUFFERS));
259 MODULE_PARM_DESC(dec_vbi_buffers,
260 "Decoder VBI buffers (in kB)\n"
261 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_VBI_BUFFERS));
262 MODULE_PARM_DESC(newi2c,
263 "Use new I2C implementation\n"
264 "\t\t\t-1 is autodetect, 0 is off, 1 is on\n"
265 "\t\t\tDefault is autodetect");
266 MODULE_PARM_DESC(i2c_clock_period,
267 "Period of SCL for the I2C bus controlled by the CX23415/6\n"
268 "\t\t\tMin: 10 usec (100 kHz), Max: 4500 usec (222 Hz)\n"
269 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_I2C_CLOCK_PERIOD));
271 MODULE_PARM_DESC(ivtv_first_minor, "Set device node number assigned to first card");
273 MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil");
274 MODULE_DESCRIPTION("CX23415/CX23416 driver");
275 MODULE_SUPPORTED_DEVICE
276 ("CX23415/CX23416 MPEG2 encoder (WinTV PVR-150/250/350/500,\n"
277 "\t\t\tYuan MPG series and similar)");
278 MODULE_LICENSE("GPL");
280 MODULE_VERSION(IVTV_VERSION);
282 void ivtv_clear_irq_mask(struct ivtv *itv, u32 mask)
284 itv->irqmask &= ~mask;
285 write_reg_sync(itv->irqmask, IVTV_REG_IRQMASK);
288 void ivtv_set_irq_mask(struct ivtv *itv, u32 mask)
290 itv->irqmask |= mask;
291 write_reg_sync(itv->irqmask, IVTV_REG_IRQMASK);
294 int ivtv_set_output_mode(struct ivtv *itv, int mode)
296 int old_mode;
298 spin_lock(&itv->lock);
299 old_mode = itv->output_mode;
300 if (old_mode == 0)
301 itv->output_mode = old_mode = mode;
302 spin_unlock(&itv->lock);
303 return old_mode;
306 struct ivtv_stream *ivtv_get_output_stream(struct ivtv *itv)
308 switch (itv->output_mode) {
309 case OUT_MPG:
310 return &itv->streams[IVTV_DEC_STREAM_TYPE_MPG];
311 case OUT_YUV:
312 return &itv->streams[IVTV_DEC_STREAM_TYPE_YUV];
313 default:
314 return NULL;
318 int ivtv_waitq(wait_queue_head_t *waitq)
320 DEFINE_WAIT(wait);
322 prepare_to_wait(waitq, &wait, TASK_INTERRUPTIBLE);
323 schedule();
324 finish_wait(waitq, &wait);
325 return signal_pending(current) ? -EINTR : 0;
328 /* Generic utility functions */
329 int ivtv_msleep_timeout(unsigned int msecs, int intr)
331 int timeout = msecs_to_jiffies(msecs);
333 do {
334 set_current_state(intr ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
335 timeout = schedule_timeout(timeout);
336 if (intr) {
337 int ret = signal_pending(current);
339 if (ret)
340 return ret;
342 } while (timeout);
343 return 0;
346 /* Release ioremapped memory */
347 static void ivtv_iounmap(struct ivtv *itv)
349 if (itv == NULL)
350 return;
352 /* Release registers memory */
353 if (itv->reg_mem != NULL) {
354 IVTV_DEBUG_INFO("releasing reg_mem\n");
355 iounmap(itv->reg_mem);
356 itv->reg_mem = NULL;
358 /* Release io memory */
359 if (itv->has_cx23415 && itv->dec_mem != NULL) {
360 IVTV_DEBUG_INFO("releasing dec_mem\n");
361 iounmap(itv->dec_mem);
363 itv->dec_mem = NULL;
365 /* Release io memory */
366 if (itv->enc_mem != NULL) {
367 IVTV_DEBUG_INFO("releasing enc_mem\n");
368 iounmap(itv->enc_mem);
369 itv->enc_mem = NULL;
373 /* Hauppauge card? get values from tveeprom */
374 void ivtv_read_eeprom(struct ivtv *itv, struct tveeprom *tv)
376 u8 eedata[256];
378 itv->i2c_client.addr = 0xA0 >> 1;
379 tveeprom_read(&itv->i2c_client, eedata, sizeof(eedata));
380 tveeprom_hauppauge_analog(&itv->i2c_client, tv, eedata);
383 static void ivtv_process_eeprom(struct ivtv *itv)
385 struct tveeprom tv;
386 int pci_slot = PCI_SLOT(itv->pdev->devfn);
388 ivtv_read_eeprom(itv, &tv);
390 /* Many thanks to Steven Toth from Hauppauge for providing the
391 model numbers */
392 switch (tv.model) {
393 /* In a few cases the PCI subsystem IDs do not correctly
394 identify the card. A better method is to check the
395 model number from the eeprom instead. */
396 case 30012 ... 30039: /* Low profile PVR250 */
397 case 32000 ... 32999:
398 case 48000 ... 48099: /* 48??? range are PVR250s with a cx23415 */
399 case 48400 ... 48599:
400 itv->card = ivtv_get_card(IVTV_CARD_PVR_250);
401 break;
402 case 48100 ... 48399:
403 case 48600 ... 48999:
404 itv->card = ivtv_get_card(IVTV_CARD_PVR_350);
405 break;
406 case 23000 ... 23999: /* PVR500 */
407 case 25000 ... 25999: /* Low profile PVR150 */
408 case 26000 ... 26999: /* Regular PVR150 */
409 itv->card = ivtv_get_card(IVTV_CARD_PVR_150);
410 break;
411 case 0:
412 IVTV_ERR("Invalid EEPROM\n");
413 return;
414 default:
415 IVTV_ERR("Unknown model %d, defaulting to PVR-150\n", tv.model);
416 itv->card = ivtv_get_card(IVTV_CARD_PVR_150);
417 break;
420 switch (tv.model) {
421 /* Old style PVR350 (with an saa7114) uses this input for
422 the tuner. */
423 case 48254:
424 itv->card = ivtv_get_card(IVTV_CARD_PVR_350_V1);
425 break;
426 default:
427 break;
430 itv->v4l2_cap = itv->card->v4l2_capabilities;
431 itv->card_name = itv->card->name;
432 itv->card_i2c = itv->card->i2c;
434 /* If this is a PVR500 then it should be possible to detect whether it is the
435 first or second unit by looking at the subsystem device ID: is bit 4 is
436 set, then it is the second unit (according to info from Hauppauge).
438 However, while this works for most cards, I have seen a few PVR500 cards
439 where both units have the same subsystem ID.
441 So instead I look at the reported 'PCI slot' (which is the slot on the PVR500
442 PCI bridge) and if it is 8, then it is assumed to be the first unit, otherwise
443 it is the second unit. It is possible that it is a different slot when ivtv is
444 used in Xen, in that case I ignore this card here. The worst that can happen
445 is that the card presents itself with a non-working radio device.
447 This detection is needed since the eeprom reports incorrectly that a radio is
448 present on the second unit. */
449 if (tv.model / 1000 == 23) {
450 static const struct ivtv_card_tuner_i2c ivtv_i2c_radio = {
451 .radio = { 0x60, I2C_CLIENT_END },
452 .demod = { 0x43, I2C_CLIENT_END },
453 .tv = { 0x61, I2C_CLIENT_END },
456 itv->card_name = "WinTV PVR 500";
457 itv->card_i2c = &ivtv_i2c_radio;
458 if (pci_slot == 8 || pci_slot == 9) {
459 int is_first = (pci_slot & 1) == 0;
461 itv->card_name = is_first ? "WinTV PVR 500 (unit #1)" :
462 "WinTV PVR 500 (unit #2)";
463 if (!is_first) {
464 IVTV_INFO("Correcting tveeprom data: no radio present on second unit\n");
465 tv.has_radio = 0;
469 IVTV_INFO("Autodetected %s\n", itv->card_name);
471 switch (tv.tuner_hauppauge_model) {
472 case 85:
473 case 99:
474 case 112:
475 itv->pvr150_workaround = 1;
476 break;
477 default:
478 break;
480 if (tv.tuner_type == TUNER_ABSENT)
481 IVTV_ERR("tveeprom cannot autodetect tuner!\n");
483 if (itv->options.tuner == -1)
484 itv->options.tuner = tv.tuner_type;
485 if (itv->options.radio == -1)
486 itv->options.radio = (tv.has_radio != 0);
487 /* only enable newi2c if an IR blaster is present */
488 if (itv->options.newi2c == -1 && tv.has_ir) {
489 itv->options.newi2c = (tv.has_ir & 4) ? 1 : 0;
490 if (itv->options.newi2c) {
491 IVTV_INFO("Reopen i2c bus for IR-blaster support\n");
492 exit_ivtv_i2c(itv);
493 init_ivtv_i2c(itv);
497 if (itv->std != 0)
498 /* user specified tuner standard */
499 return;
501 /* autodetect tuner standard */
502 if (tv.tuner_formats & V4L2_STD_PAL) {
503 IVTV_DEBUG_INFO("PAL tuner detected\n");
504 itv->std |= V4L2_STD_PAL_BG | V4L2_STD_PAL_H;
505 } else if (tv.tuner_formats & V4L2_STD_NTSC) {
506 IVTV_DEBUG_INFO("NTSC tuner detected\n");
507 itv->std |= V4L2_STD_NTSC_M;
508 } else if (tv.tuner_formats & V4L2_STD_SECAM) {
509 IVTV_DEBUG_INFO("SECAM tuner detected\n");
510 itv->std |= V4L2_STD_SECAM_L;
511 } else {
512 IVTV_INFO("No tuner detected, default to NTSC-M\n");
513 itv->std |= V4L2_STD_NTSC_M;
517 static v4l2_std_id ivtv_parse_std(struct ivtv *itv)
519 switch (pal[0]) {
520 case '6':
521 tunertype = 0;
522 return V4L2_STD_PAL_60;
523 case 'b':
524 case 'B':
525 case 'g':
526 case 'G':
527 case 'h':
528 case 'H':
529 tunertype = 0;
530 return V4L2_STD_PAL_BG | V4L2_STD_PAL_H;
531 case 'n':
532 case 'N':
533 tunertype = 1;
534 if (pal[1] == 'c' || pal[1] == 'C')
535 return V4L2_STD_PAL_Nc;
536 return V4L2_STD_PAL_N;
537 case 'i':
538 case 'I':
539 tunertype = 0;
540 return V4L2_STD_PAL_I;
541 case 'd':
542 case 'D':
543 case 'k':
544 case 'K':
545 tunertype = 0;
546 return V4L2_STD_PAL_DK;
547 case 'M':
548 case 'm':
549 tunertype = 1;
550 return V4L2_STD_PAL_M;
551 case '-':
552 break;
553 default:
554 IVTV_WARN("pal= argument not recognised\n");
555 return 0;
558 switch (secam[0]) {
559 case 'b':
560 case 'B':
561 case 'g':
562 case 'G':
563 case 'h':
564 case 'H':
565 tunertype = 0;
566 return V4L2_STD_SECAM_B | V4L2_STD_SECAM_G | V4L2_STD_SECAM_H;
567 case 'd':
568 case 'D':
569 case 'k':
570 case 'K':
571 tunertype = 0;
572 return V4L2_STD_SECAM_DK;
573 case 'l':
574 case 'L':
575 tunertype = 0;
576 if (secam[1] == 'C' || secam[1] == 'c')
577 return V4L2_STD_SECAM_LC;
578 return V4L2_STD_SECAM_L;
579 case '-':
580 break;
581 default:
582 IVTV_WARN("secam= argument not recognised\n");
583 return 0;
586 switch (ntsc[0]) {
587 case 'm':
588 case 'M':
589 tunertype = 1;
590 return V4L2_STD_NTSC_M;
591 case 'j':
592 case 'J':
593 tunertype = 1;
594 return V4L2_STD_NTSC_M_JP;
595 case 'k':
596 case 'K':
597 tunertype = 1;
598 return V4L2_STD_NTSC_M_KR;
599 case '-':
600 break;
601 default:
602 IVTV_WARN("ntsc= argument not recognised\n");
603 return 0;
606 /* no match found */
607 return 0;
610 static void ivtv_process_options(struct ivtv *itv)
612 const char *chipname;
613 int i, j;
615 itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_MPG] = enc_mpg_buffers * 1024;
616 itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_YUV] = enc_yuv_buffers * 1024;
617 itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_VBI] = enc_vbi_buffers * 1024;
618 itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_PCM] = enc_pcm_buffers;
619 itv->options.kilobytes[IVTV_DEC_STREAM_TYPE_MPG] = dec_mpg_buffers * 1024;
620 itv->options.kilobytes[IVTV_DEC_STREAM_TYPE_YUV] = dec_yuv_buffers * 1024;
621 itv->options.kilobytes[IVTV_DEC_STREAM_TYPE_VBI] = dec_vbi_buffers;
622 itv->options.cardtype = cardtype[itv->instance];
623 itv->options.tuner = tuner[itv->instance];
624 itv->options.radio = radio[itv->instance];
626 itv->options.i2c_clock_period = i2c_clock_period[itv->instance];
627 if (itv->options.i2c_clock_period == -1)
628 itv->options.i2c_clock_period = IVTV_DEFAULT_I2C_CLOCK_PERIOD;
629 else if (itv->options.i2c_clock_period < 10)
630 itv->options.i2c_clock_period = 10;
631 else if (itv->options.i2c_clock_period > 4500)
632 itv->options.i2c_clock_period = 4500;
634 itv->options.newi2c = newi2c;
635 if (tunertype < -1 || tunertype > 1) {
636 IVTV_WARN("Invalid tunertype argument, will autodetect instead\n");
637 tunertype = -1;
639 itv->std = ivtv_parse_std(itv);
640 if (itv->std == 0 && tunertype >= 0)
641 itv->std = tunertype ? V4L2_STD_MN : (V4L2_STD_ALL & ~V4L2_STD_MN);
642 itv->has_cx23415 = (itv->pdev->device == PCI_DEVICE_ID_IVTV15);
643 chipname = itv->has_cx23415 ? "cx23415" : "cx23416";
644 if (itv->options.cardtype == -1) {
645 IVTV_INFO("Ignore card (detected %s based chip)\n", chipname);
646 return;
648 if ((itv->card = ivtv_get_card(itv->options.cardtype - 1))) {
649 IVTV_INFO("User specified %s card (detected %s based chip)\n",
650 itv->card->name, chipname);
651 } else if (itv->options.cardtype != 0) {
652 IVTV_ERR("Unknown user specified type, trying to autodetect card\n");
654 if (itv->card == NULL) {
655 if (itv->pdev->subsystem_vendor == IVTV_PCI_ID_HAUPPAUGE ||
656 itv->pdev->subsystem_vendor == IVTV_PCI_ID_HAUPPAUGE_ALT1 ||
657 itv->pdev->subsystem_vendor == IVTV_PCI_ID_HAUPPAUGE_ALT2) {
658 itv->card = ivtv_get_card(itv->has_cx23415 ? IVTV_CARD_PVR_350 : IVTV_CARD_PVR_150);
659 IVTV_INFO("Autodetected Hauppauge card (%s based)\n",
660 chipname);
663 if (itv->card == NULL) {
664 for (i = 0; (itv->card = ivtv_get_card(i)); i++) {
665 if (itv->card->pci_list == NULL)
666 continue;
667 for (j = 0; itv->card->pci_list[j].device; j++) {
668 if (itv->pdev->device !=
669 itv->card->pci_list[j].device)
670 continue;
671 if (itv->pdev->subsystem_vendor !=
672 itv->card->pci_list[j].subsystem_vendor)
673 continue;
674 if (itv->pdev->subsystem_device !=
675 itv->card->pci_list[j].subsystem_device)
676 continue;
677 IVTV_INFO("Autodetected %s card (%s based)\n",
678 itv->card->name, chipname);
679 goto done;
683 done:
685 if (itv->card == NULL) {
686 itv->card = ivtv_get_card(IVTV_CARD_PVR_150);
687 IVTV_ERR("Unknown card: vendor/device: [%04x:%04x]\n",
688 itv->pdev->vendor, itv->pdev->device);
689 IVTV_ERR(" subsystem vendor/device: [%04x:%04x]\n",
690 itv->pdev->subsystem_vendor, itv->pdev->subsystem_device);
691 IVTV_ERR(" %s based\n", chipname);
692 IVTV_ERR("Defaulting to %s card\n", itv->card->name);
693 IVTV_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n");
694 IVTV_ERR("card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)\n");
695 IVTV_ERR("Prefix your subject line with [UNKNOWN IVTV CARD].\n");
697 itv->v4l2_cap = itv->card->v4l2_capabilities;
698 itv->card_name = itv->card->name;
699 itv->card_i2c = itv->card->i2c;
702 /* Precondition: the ivtv structure has been memset to 0. Only
703 the dev and num fields have been filled in.
704 No assumptions on the card type may be made here (see ivtv_init_struct2
705 for that).
707 static int __devinit ivtv_init_struct1(struct ivtv *itv)
709 struct sched_param param = { .sched_priority = 99 };
711 itv->base_addr = pci_resource_start(itv->pdev, 0);
712 itv->enc_mbox.max_mbox = 2; /* the encoder has 3 mailboxes (0-2) */
713 itv->dec_mbox.max_mbox = 1; /* the decoder has 2 mailboxes (0-1) */
715 mutex_init(&itv->serialize_lock);
716 mutex_init(&itv->i2c_bus_lock);
717 mutex_init(&itv->udma.lock);
719 spin_lock_init(&itv->lock);
720 spin_lock_init(&itv->dma_reg_lock);
722 init_kthread_worker(&itv->irq_worker);
723 itv->irq_worker_task = kthread_run(kthread_worker_fn, &itv->irq_worker,
724 itv->v4l2_dev.name);
725 if (IS_ERR(itv->irq_worker_task)) {
726 IVTV_ERR("Could not create ivtv task\n");
727 return -1;
729 /* must use the FIFO scheduler as it is realtime sensitive */
730 sched_setscheduler(itv->irq_worker_task, SCHED_FIFO, &param);
732 init_kthread_work(&itv->irq_work, ivtv_irq_work_handler);
734 /* Initial settings */
735 itv->cxhdl.port = CX2341X_PORT_MEMORY;
736 itv->cxhdl.capabilities = CX2341X_CAP_HAS_SLICED_VBI;
737 init_waitqueue_head(&itv->eos_waitq);
738 init_waitqueue_head(&itv->event_waitq);
739 init_waitqueue_head(&itv->vsync_waitq);
740 init_waitqueue_head(&itv->dma_waitq);
741 init_timer(&itv->dma_timer);
742 itv->dma_timer.function = ivtv_unfinished_dma;
743 itv->dma_timer.data = (unsigned long)itv;
745 itv->cur_dma_stream = -1;
746 itv->cur_pio_stream = -1;
747 itv->audio_stereo_mode = AUDIO_STEREO;
748 itv->audio_bilingual_mode = AUDIO_MONO_LEFT;
750 /* Ctrls */
751 itv->speed = 1000;
753 /* VBI */
754 itv->vbi.in.type = V4L2_BUF_TYPE_VBI_CAPTURE;
755 itv->vbi.sliced_in = &itv->vbi.in.fmt.sliced;
757 /* Init the sg table for osd/yuv output */
758 sg_init_table(itv->udma.SGlist, IVTV_DMA_SG_OSD_ENT);
760 /* OSD */
761 itv->osd_global_alpha_state = 1;
762 itv->osd_global_alpha = 255;
764 /* YUV */
765 atomic_set(&itv->yuv_info.next_dma_frame, -1);
766 itv->yuv_info.lace_mode = ivtv_yuv_mode;
767 itv->yuv_info.lace_threshold = ivtv_yuv_threshold;
768 itv->yuv_info.max_frames_buffered = 3;
769 itv->yuv_info.track_osd = 1;
770 return 0;
773 /* Second initialization part. Here the card type has been
774 autodetected. */
775 static void __devinit ivtv_init_struct2(struct ivtv *itv)
777 int i;
779 for (i = 0; i < IVTV_CARD_MAX_VIDEO_INPUTS; i++)
780 if (itv->card->video_inputs[i].video_type == 0)
781 break;
782 itv->nof_inputs = i;
783 for (i = 0; i < IVTV_CARD_MAX_AUDIO_INPUTS; i++)
784 if (itv->card->audio_inputs[i].audio_type == 0)
785 break;
786 itv->nof_audio_inputs = i;
788 if (itv->card->hw_all & IVTV_HW_CX25840) {
789 itv->vbi.sliced_size = 288; /* multiple of 16, real size = 284 */
790 } else {
791 itv->vbi.sliced_size = 64; /* multiple of 16, real size = 52 */
794 /* Find tuner input */
795 for (i = 0; i < itv->nof_inputs; i++) {
796 if (itv->card->video_inputs[i].video_type ==
797 IVTV_CARD_INPUT_VID_TUNER)
798 break;
800 if (i == itv->nof_inputs)
801 i = 0;
802 itv->active_input = i;
803 itv->audio_input = itv->card->video_inputs[i].audio_index;
806 static int ivtv_setup_pci(struct ivtv *itv, struct pci_dev *pdev,
807 const struct pci_device_id *pci_id)
809 u16 cmd;
810 unsigned char pci_latency;
812 IVTV_DEBUG_INFO("Enabling pci device\n");
814 if (pci_enable_device(pdev)) {
815 IVTV_ERR("Can't enable device!\n");
816 return -EIO;
818 if (pci_set_dma_mask(pdev, 0xffffffff)) {
819 IVTV_ERR("No suitable DMA available.\n");
820 return -EIO;
822 if (!request_mem_region(itv->base_addr, IVTV_ENCODER_SIZE, "ivtv encoder")) {
823 IVTV_ERR("Cannot request encoder memory region.\n");
824 return -EIO;
827 if (!request_mem_region(itv->base_addr + IVTV_REG_OFFSET,
828 IVTV_REG_SIZE, "ivtv registers")) {
829 IVTV_ERR("Cannot request register memory region.\n");
830 release_mem_region(itv->base_addr, IVTV_ENCODER_SIZE);
831 return -EIO;
834 if (itv->has_cx23415 &&
835 !request_mem_region(itv->base_addr + IVTV_DECODER_OFFSET,
836 IVTV_DECODER_SIZE, "ivtv decoder")) {
837 IVTV_ERR("Cannot request decoder memory region.\n");
838 release_mem_region(itv->base_addr, IVTV_ENCODER_SIZE);
839 release_mem_region(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
840 return -EIO;
843 /* Check for bus mastering */
844 pci_read_config_word(pdev, PCI_COMMAND, &cmd);
845 if (!(cmd & PCI_COMMAND_MASTER)) {
846 IVTV_DEBUG_INFO("Attempting to enable Bus Mastering\n");
847 pci_set_master(pdev);
848 pci_read_config_word(pdev, PCI_COMMAND, &cmd);
849 if (!(cmd & PCI_COMMAND_MASTER)) {
850 IVTV_ERR("Bus Mastering is not enabled\n");
851 return -ENXIO;
854 IVTV_DEBUG_INFO("Bus Mastering Enabled.\n");
856 pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency);
858 if (pci_latency < 64 && ivtv_pci_latency) {
859 IVTV_INFO("Unreasonably low latency timer, "
860 "setting to 64 (was %d)\n", pci_latency);
861 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
862 pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency);
864 /* This config space value relates to DMA latencies. The
865 default value 0x8080 is too low however and will lead
866 to DMA errors. 0xffff is the max value which solves
867 these problems. */
868 pci_write_config_dword(pdev, 0x40, 0xffff);
870 IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, "
871 "irq: %d, latency: %d, memory: 0x%lx\n",
872 pdev->device, pdev->revision, pdev->bus->number,
873 PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
874 pdev->irq, pci_latency, (unsigned long)itv->base_addr);
876 return 0;
879 static void ivtv_load_and_init_modules(struct ivtv *itv)
881 u32 hw = itv->card->hw_all;
882 unsigned i;
884 /* check which i2c devices are actually found */
885 for (i = 0; i < 32; i++) {
886 u32 device = 1 << i;
888 if (!(device & hw))
889 continue;
890 if (device == IVTV_HW_GPIO || device == IVTV_HW_TVEEPROM) {
891 /* GPIO and TVEEPROM do not use i2c probing */
892 itv->hw_flags |= device;
893 continue;
895 if (ivtv_i2c_register(itv, i) == 0)
896 itv->hw_flags |= device;
899 /* probe for legacy IR controllers that aren't in card definitions */
900 if ((itv->hw_flags & IVTV_HW_IR_ANY) == 0)
901 ivtv_i2c_new_ir_legacy(itv);
903 if (itv->card->hw_all & IVTV_HW_CX25840)
904 itv->sd_video = ivtv_find_hw(itv, IVTV_HW_CX25840);
905 else if (itv->card->hw_all & IVTV_HW_SAA717X)
906 itv->sd_video = ivtv_find_hw(itv, IVTV_HW_SAA717X);
907 else if (itv->card->hw_all & IVTV_HW_SAA7114)
908 itv->sd_video = ivtv_find_hw(itv, IVTV_HW_SAA7114);
909 else
910 itv->sd_video = ivtv_find_hw(itv, IVTV_HW_SAA7115);
911 itv->sd_audio = ivtv_find_hw(itv, itv->card->hw_audio_ctrl);
912 itv->sd_muxer = ivtv_find_hw(itv, itv->card->hw_muxer);
914 hw = itv->hw_flags;
916 if (itv->card->type == IVTV_CARD_CX23416GYC) {
917 /* Several variations of this card exist, detect which card
918 type should be used. */
919 if ((hw & (IVTV_HW_UPD64031A | IVTV_HW_UPD6408X)) == 0)
920 itv->card = ivtv_get_card(IVTV_CARD_CX23416GYC_NOGRYCS);
921 else if ((hw & IVTV_HW_UPD64031A) == 0)
922 itv->card = ivtv_get_card(IVTV_CARD_CX23416GYC_NOGR);
924 else if (itv->card->type == IVTV_CARD_GV_MVPRX ||
925 itv->card->type == IVTV_CARD_GV_MVPRX2E) {
926 /* The crystal frequency of GVMVPRX is 24.576MHz */
927 v4l2_subdev_call(itv->sd_video, video, s_crystal_freq,
928 SAA7115_FREQ_24_576_MHZ, SAA7115_FREQ_FL_UCGC);
931 if (hw & IVTV_HW_CX25840) {
932 itv->vbi.raw_decoder_line_size = 1444;
933 itv->vbi.raw_decoder_sav_odd_field = 0x20;
934 itv->vbi.raw_decoder_sav_even_field = 0x60;
935 itv->vbi.sliced_decoder_line_size = 272;
936 itv->vbi.sliced_decoder_sav_odd_field = 0xB0;
937 itv->vbi.sliced_decoder_sav_even_field = 0xF0;
940 if (hw & IVTV_HW_SAA711X) {
941 struct v4l2_dbg_chip_ident v;
943 /* determine the exact saa711x model */
944 itv->hw_flags &= ~IVTV_HW_SAA711X;
946 v.match.type = V4L2_CHIP_MATCH_I2C_DRIVER;
947 strlcpy(v.match.name, "saa7115", sizeof(v.match.name));
948 ivtv_call_hw(itv, IVTV_HW_SAA711X, core, g_chip_ident, &v);
949 if (v.ident == V4L2_IDENT_SAA7114) {
950 itv->hw_flags |= IVTV_HW_SAA7114;
951 /* VBI is not yet supported by the saa7114 driver. */
952 itv->v4l2_cap &= ~(V4L2_CAP_SLICED_VBI_CAPTURE|V4L2_CAP_VBI_CAPTURE);
953 } else {
954 itv->hw_flags |= IVTV_HW_SAA7115;
956 itv->vbi.raw_decoder_line_size = 1443;
957 itv->vbi.raw_decoder_sav_odd_field = 0x25;
958 itv->vbi.raw_decoder_sav_even_field = 0x62;
959 itv->vbi.sliced_decoder_line_size = 51;
960 itv->vbi.sliced_decoder_sav_odd_field = 0xAB;
961 itv->vbi.sliced_decoder_sav_even_field = 0xEC;
964 if (hw & IVTV_HW_SAA717X) {
965 itv->vbi.raw_decoder_line_size = 1443;
966 itv->vbi.raw_decoder_sav_odd_field = 0x25;
967 itv->vbi.raw_decoder_sav_even_field = 0x62;
968 itv->vbi.sliced_decoder_line_size = 51;
969 itv->vbi.sliced_decoder_sav_odd_field = 0xAB;
970 itv->vbi.sliced_decoder_sav_even_field = 0xEC;
974 static int __devinit ivtv_probe(struct pci_dev *pdev,
975 const struct pci_device_id *pci_id)
977 int retval = 0;
978 int vbi_buf_size;
979 struct ivtv *itv;
981 itv = kzalloc(sizeof(struct ivtv), GFP_ATOMIC);
982 if (itv == NULL)
983 return -ENOMEM;
984 itv->pdev = pdev;
985 itv->instance = v4l2_device_set_name(&itv->v4l2_dev, "ivtv",
986 &ivtv_instance);
988 retval = v4l2_device_register(&pdev->dev, &itv->v4l2_dev);
989 if (retval) {
990 kfree(itv);
991 return retval;
993 IVTV_INFO("Initializing card %d\n", itv->instance);
995 ivtv_process_options(itv);
996 if (itv->options.cardtype == -1) {
997 retval = -ENODEV;
998 goto err;
1000 if (ivtv_init_struct1(itv)) {
1001 retval = -ENOMEM;
1002 goto err;
1004 retval = cx2341x_handler_init(&itv->cxhdl, 50);
1005 if (retval)
1006 goto err;
1007 itv->v4l2_dev.ctrl_handler = &itv->cxhdl.hdl;
1008 itv->cxhdl.ops = &ivtv_cxhdl_ops;
1009 itv->cxhdl.priv = itv;
1010 itv->cxhdl.func = ivtv_api_func;
1012 IVTV_DEBUG_INFO("base addr: 0x%08x\n", itv->base_addr);
1014 /* PCI Device Setup */
1015 retval = ivtv_setup_pci(itv, pdev, pci_id);
1016 if (retval == -EIO)
1017 goto free_worker;
1018 if (retval == -ENXIO)
1019 goto free_mem;
1021 /* map io memory */
1022 IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
1023 itv->base_addr + IVTV_ENCODER_OFFSET, IVTV_ENCODER_SIZE);
1024 itv->enc_mem = ioremap_nocache(itv->base_addr + IVTV_ENCODER_OFFSET,
1025 IVTV_ENCODER_SIZE);
1026 if (!itv->enc_mem) {
1027 IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 "
1028 "encoder memory\n");
1029 IVTV_ERR("Each capture card with a CX23415/6 needs 8 MB of "
1030 "vmalloc address space for this window\n");
1031 IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
1032 IVTV_ERR("Use the vmalloc= kernel command line option to set "
1033 "VmallocTotal to a larger value\n");
1034 retval = -ENOMEM;
1035 goto free_mem;
1038 if (itv->has_cx23415) {
1039 IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
1040 itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE);
1041 itv->dec_mem = ioremap_nocache(itv->base_addr + IVTV_DECODER_OFFSET,
1042 IVTV_DECODER_SIZE);
1043 if (!itv->dec_mem) {
1044 IVTV_ERR("ioremap failed. Can't get a window into "
1045 "CX23415 decoder memory\n");
1046 IVTV_ERR("Each capture card with a CX23415 needs 8 MB "
1047 "of vmalloc address space for this window\n");
1048 IVTV_ERR("Check the output of 'grep Vmalloc "
1049 "/proc/meminfo'\n");
1050 IVTV_ERR("Use the vmalloc= kernel command line option "
1051 "to set VmallocTotal to a larger value\n");
1052 retval = -ENOMEM;
1053 goto free_mem;
1056 else {
1057 itv->dec_mem = itv->enc_mem;
1060 /* map registers memory */
1061 IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
1062 itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
1063 itv->reg_mem =
1064 ioremap_nocache(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
1065 if (!itv->reg_mem) {
1066 IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 "
1067 "register space\n");
1068 IVTV_ERR("Each capture card with a CX23415/6 needs 64 kB of "
1069 "vmalloc address space for this window\n");
1070 IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
1071 IVTV_ERR("Use the vmalloc= kernel command line option to set "
1072 "VmallocTotal to a larger value\n");
1073 retval = -ENOMEM;
1074 goto free_io;
1077 retval = ivtv_gpio_init(itv);
1078 if (retval)
1079 goto free_io;
1081 /* active i2c */
1082 IVTV_DEBUG_INFO("activating i2c...\n");
1083 if (init_ivtv_i2c(itv)) {
1084 IVTV_ERR("Could not initialize i2c\n");
1085 goto free_io;
1088 if (itv->card->hw_all & IVTV_HW_TVEEPROM) {
1089 /* Based on the model number the cardtype may be changed.
1090 The PCI IDs are not always reliable. */
1091 ivtv_process_eeprom(itv);
1093 if (itv->card->comment)
1094 IVTV_INFO("%s", itv->card->comment);
1095 if (itv->card->v4l2_capabilities == 0) {
1096 /* card was detected but is not supported */
1097 retval = -ENODEV;
1098 goto free_i2c;
1101 if (itv->std == 0) {
1102 itv->std = V4L2_STD_NTSC_M;
1105 if (itv->options.tuner == -1) {
1106 int i;
1108 for (i = 0; i < IVTV_CARD_MAX_TUNERS; i++) {
1109 if ((itv->std & itv->card->tuners[i].std) == 0)
1110 continue;
1111 itv->options.tuner = itv->card->tuners[i].tuner;
1112 break;
1115 /* if no tuner was found, then pick the first tuner in the card list */
1116 if (itv->options.tuner == -1 && itv->card->tuners[0].std) {
1117 itv->std = itv->card->tuners[0].std;
1118 if (itv->std & V4L2_STD_PAL)
1119 itv->std = V4L2_STD_PAL_BG | V4L2_STD_PAL_H;
1120 else if (itv->std & V4L2_STD_NTSC)
1121 itv->std = V4L2_STD_NTSC_M;
1122 else if (itv->std & V4L2_STD_SECAM)
1123 itv->std = V4L2_STD_SECAM_L;
1124 itv->options.tuner = itv->card->tuners[0].tuner;
1126 if (itv->options.radio == -1)
1127 itv->options.radio = (itv->card->radio_input.audio_type != 0);
1129 /* The card is now fully identified, continue with card-specific
1130 initialization. */
1131 ivtv_init_struct2(itv);
1133 ivtv_load_and_init_modules(itv);
1135 if (itv->std & V4L2_STD_525_60) {
1136 itv->is_60hz = 1;
1137 itv->is_out_60hz = 1;
1138 } else {
1139 itv->is_50hz = 1;
1140 itv->is_out_50hz = 1;
1143 itv->yuv_info.osd_full_w = 720;
1144 itv->yuv_info.osd_full_h = itv->is_out_50hz ? 576 : 480;
1145 itv->yuv_info.v4l2_src_w = itv->yuv_info.osd_full_w;
1146 itv->yuv_info.v4l2_src_h = itv->yuv_info.osd_full_h;
1148 cx2341x_handler_set_50hz(&itv->cxhdl, itv->is_50hz);
1150 itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_MPG] = 0x08000;
1151 itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_PCM] = 0x01200;
1152 itv->stream_buf_size[IVTV_DEC_STREAM_TYPE_MPG] = 0x10000;
1153 itv->stream_buf_size[IVTV_DEC_STREAM_TYPE_YUV] = 0x10000;
1154 itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_YUV] = 0x08000;
1156 /* Setup VBI Raw Size. Should be big enough to hold PAL.
1157 It is possible to switch between PAL and NTSC, so we need to
1158 take the largest size here. */
1159 /* 1456 is multiple of 16, real size = 1444 */
1160 itv->vbi.raw_size = 1456;
1161 /* We use a buffer size of 1/2 of the total size needed for a
1162 frame. This is actually very useful, since we now receive
1163 a field at a time and that makes 'compressing' the raw data
1164 down to size by stripping off the SAV codes a lot easier.
1165 Note: having two different buffer sizes prevents standard
1166 switching on the fly. We need to find a better solution... */
1167 vbi_buf_size = itv->vbi.raw_size * (itv->is_60hz ? 24 : 36) / 2;
1168 itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_VBI] = vbi_buf_size;
1169 itv->stream_buf_size[IVTV_DEC_STREAM_TYPE_VBI] = sizeof(struct v4l2_sliced_vbi_data) * 36;
1171 if (itv->options.radio > 0)
1172 itv->v4l2_cap |= V4L2_CAP_RADIO;
1174 if (itv->options.tuner > -1) {
1175 struct tuner_setup setup;
1177 setup.addr = ADDR_UNSET;
1178 setup.type = itv->options.tuner;
1179 setup.mode_mask = T_ANALOG_TV; /* matches TV tuners */
1180 if (itv->options.radio > 0)
1181 setup.mode_mask |= T_RADIO;
1182 setup.tuner_callback = (setup.type == TUNER_XC2028) ?
1183 ivtv_reset_tuner_gpio : NULL;
1184 ivtv_call_all(itv, tuner, s_type_addr, &setup);
1185 if (setup.type == TUNER_XC2028) {
1186 static struct xc2028_ctrl ctrl = {
1187 .fname = XC2028_DEFAULT_FIRMWARE,
1188 .max_len = 64,
1190 struct v4l2_priv_tun_config cfg = {
1191 .tuner = itv->options.tuner,
1192 .priv = &ctrl,
1194 ivtv_call_all(itv, tuner, s_config, &cfg);
1198 /* The tuner is fixed to the standard. The other inputs (e.g. S-Video)
1199 are not. */
1200 itv->tuner_std = itv->std;
1202 if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
1203 ivtv_call_all(itv, video, s_std_output, itv->std);
1204 /* Turn off the output signal. The mpeg decoder is not yet
1205 active so without this you would get a green image until the
1206 mpeg decoder becomes active. */
1207 ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_stream, 0);
1210 /* clear interrupt mask, effectively disabling interrupts */
1211 ivtv_set_irq_mask(itv, 0xffffffff);
1213 /* Register IRQ */
1214 retval = request_irq(itv->pdev->irq, ivtv_irq_handler,
1215 IRQF_SHARED | IRQF_DISABLED, itv->v4l2_dev.name, (void *)itv);
1216 if (retval) {
1217 IVTV_ERR("Failed to register irq %d\n", retval);
1218 goto free_i2c;
1221 retval = ivtv_streams_setup(itv);
1222 if (retval) {
1223 IVTV_ERR("Error %d setting up streams\n", retval);
1224 goto free_irq;
1226 retval = ivtv_streams_register(itv);
1227 if (retval) {
1228 IVTV_ERR("Error %d registering devices\n", retval);
1229 goto free_streams;
1231 IVTV_INFO("Initialized card: %s\n", itv->card_name);
1232 return 0;
1234 free_streams:
1235 ivtv_streams_cleanup(itv, 1);
1236 free_irq:
1237 free_irq(itv->pdev->irq, (void *)itv);
1238 free_i2c:
1239 exit_ivtv_i2c(itv);
1240 free_io:
1241 ivtv_iounmap(itv);
1242 free_mem:
1243 release_mem_region(itv->base_addr, IVTV_ENCODER_SIZE);
1244 release_mem_region(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
1245 if (itv->has_cx23415)
1246 release_mem_region(itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE);
1247 free_worker:
1248 kthread_stop(itv->irq_worker_task);
1249 err:
1250 if (retval == 0)
1251 retval = -ENODEV;
1252 IVTV_ERR("Error %d on initialization\n", retval);
1254 v4l2_device_unregister(&itv->v4l2_dev);
1255 kfree(itv);
1256 return retval;
1259 int ivtv_init_on_first_open(struct ivtv *itv)
1261 struct v4l2_frequency vf;
1262 /* Needed to call ioctls later */
1263 struct ivtv_open_id fh;
1264 int fw_retry_count = 3;
1265 int video_input;
1267 fh.itv = itv;
1269 if (test_bit(IVTV_F_I_FAILED, &itv->i_flags))
1270 return -ENXIO;
1272 if (test_and_set_bit(IVTV_F_I_INITED, &itv->i_flags))
1273 return 0;
1275 while (--fw_retry_count > 0) {
1276 /* load firmware */
1277 if (ivtv_firmware_init(itv) == 0)
1278 break;
1279 if (fw_retry_count > 1)
1280 IVTV_WARN("Retry loading firmware\n");
1283 if (fw_retry_count == 0) {
1284 set_bit(IVTV_F_I_FAILED, &itv->i_flags);
1285 return -ENXIO;
1288 /* Try and get firmware versions */
1289 IVTV_DEBUG_INFO("Getting firmware version..\n");
1290 ivtv_firmware_versions(itv);
1292 if (itv->card->hw_all & IVTV_HW_CX25840)
1293 v4l2_subdev_call(itv->sd_video, core, load_fw);
1295 vf.tuner = 0;
1296 vf.type = V4L2_TUNER_ANALOG_TV;
1297 vf.frequency = 6400; /* the tuner 'baseline' frequency */
1299 /* Set initial frequency. For PAL/SECAM broadcasts no
1300 'default' channel exists AFAIK. */
1301 if (itv->std == V4L2_STD_NTSC_M_JP) {
1302 vf.frequency = 1460; /* ch. 1 91250*16/1000 */
1304 else if (itv->std & V4L2_STD_NTSC_M) {
1305 vf.frequency = 1076; /* ch. 4 67250*16/1000 */
1308 video_input = itv->active_input;
1309 itv->active_input++; /* Force update of input */
1310 ivtv_s_input(NULL, &fh, video_input);
1312 /* Let the VIDIOC_S_STD ioctl do all the work, keeps the code
1313 in one place. */
1314 itv->std++; /* Force full standard initialization */
1315 itv->std_out = itv->std;
1316 ivtv_s_frequency(NULL, &fh, &vf);
1318 if (itv->card->v4l2_capabilities & V4L2_CAP_VIDEO_OUTPUT) {
1319 /* Turn on the TV-out: ivtv_init_mpeg_decoder() initializes
1320 the mpeg decoder so now the saa7127 receives a proper
1321 signal. */
1322 ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_stream, 1);
1323 ivtv_init_mpeg_decoder(itv);
1326 /* On a cx23416 this seems to be able to enable DMA to the chip? */
1327 if (!itv->has_cx23415)
1328 write_reg_sync(0x03, IVTV_REG_DMACONTROL);
1330 ivtv_s_std_enc(itv, &itv->tuner_std);
1332 /* Default interrupts enabled. For the PVR350 this includes the
1333 decoder VSYNC interrupt, which is always on. It is not only used
1334 during decoding but also by the OSD.
1335 Some old PVR250 cards had a cx23415, so testing for that is too
1336 general. Instead test if the card has video output capability. */
1337 if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
1338 ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_INIT | IVTV_IRQ_DEC_VSYNC);
1339 ivtv_set_osd_alpha(itv);
1340 ivtv_s_std_dec(itv, &itv->tuner_std);
1341 } else {
1342 ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_INIT);
1345 /* Setup initial controls */
1346 cx2341x_handler_setup(&itv->cxhdl);
1347 return 0;
1350 static void ivtv_remove(struct pci_dev *pdev)
1352 struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev);
1353 struct ivtv *itv = to_ivtv(v4l2_dev);
1354 int i;
1356 IVTV_DEBUG_INFO("Removing card\n");
1358 if (test_bit(IVTV_F_I_INITED, &itv->i_flags)) {
1359 /* Stop all captures */
1360 IVTV_DEBUG_INFO("Stopping all streams\n");
1361 if (atomic_read(&itv->capturing) > 0)
1362 ivtv_stop_all_captures(itv);
1364 /* Stop all decoding */
1365 IVTV_DEBUG_INFO("Stopping decoding\n");
1367 /* Turn off the TV-out */
1368 if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)
1369 ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_stream, 0);
1370 if (atomic_read(&itv->decoding) > 0) {
1371 int type;
1373 if (test_bit(IVTV_F_I_DEC_YUV, &itv->i_flags))
1374 type = IVTV_DEC_STREAM_TYPE_YUV;
1375 else
1376 type = IVTV_DEC_STREAM_TYPE_MPG;
1377 ivtv_stop_v4l2_decode_stream(&itv->streams[type],
1378 VIDEO_CMD_STOP_TO_BLACK | VIDEO_CMD_STOP_IMMEDIATELY, 0);
1380 ivtv_halt_firmware(itv);
1383 /* Interrupts */
1384 ivtv_set_irq_mask(itv, 0xffffffff);
1385 del_timer_sync(&itv->dma_timer);
1387 /* Kill irq worker */
1388 flush_kthread_worker(&itv->irq_worker);
1389 kthread_stop(itv->irq_worker_task);
1391 ivtv_streams_cleanup(itv, 1);
1392 ivtv_udma_free(itv);
1394 exit_ivtv_i2c(itv);
1396 free_irq(itv->pdev->irq, (void *)itv);
1397 ivtv_iounmap(itv);
1399 release_mem_region(itv->base_addr, IVTV_ENCODER_SIZE);
1400 release_mem_region(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
1401 if (itv->has_cx23415)
1402 release_mem_region(itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE);
1404 pci_disable_device(itv->pdev);
1405 for (i = 0; i < IVTV_VBI_FRAMES; i++)
1406 kfree(itv->vbi.sliced_mpeg_data[i]);
1408 printk(KERN_INFO "ivtv: Removed %s\n", itv->card_name);
1410 v4l2_device_unregister(&itv->v4l2_dev);
1411 kfree(itv);
1414 /* define a pci_driver for card detection */
1415 static struct pci_driver ivtv_pci_driver = {
1416 .name = "ivtv",
1417 .id_table = ivtv_pci_tbl,
1418 .probe = ivtv_probe,
1419 .remove = ivtv_remove,
1422 static int __init module_start(void)
1424 printk(KERN_INFO "ivtv: Start initialization, version %s\n", IVTV_VERSION);
1426 /* Validate parameters */
1427 if (ivtv_first_minor < 0 || ivtv_first_minor >= IVTV_MAX_CARDS) {
1428 printk(KERN_ERR "ivtv: Exiting, ivtv_first_minor must be between 0 and %d\n",
1429 IVTV_MAX_CARDS - 1);
1430 return -1;
1433 if (ivtv_debug < 0 || ivtv_debug > 2047) {
1434 ivtv_debug = 0;
1435 printk(KERN_INFO "ivtv: Debug value must be >= 0 and <= 2047\n");
1438 if (pci_register_driver(&ivtv_pci_driver)) {
1439 printk(KERN_ERR "ivtv: Error detecting PCI card\n");
1440 return -ENODEV;
1442 printk(KERN_INFO "ivtv: End initialization\n");
1443 return 0;
1446 static void __exit module_cleanup(void)
1448 pci_unregister_driver(&ivtv_pci_driver);
1451 /* Note: These symbols are exported because they are used by the ivtvfb
1452 framebuffer module and an infrared module for the IR-blaster. */
1453 EXPORT_SYMBOL(ivtv_set_irq_mask);
1454 EXPORT_SYMBOL(ivtv_api);
1455 EXPORT_SYMBOL(ivtv_vapi);
1456 EXPORT_SYMBOL(ivtv_vapi_result);
1457 EXPORT_SYMBOL(ivtv_clear_irq_mask);
1458 EXPORT_SYMBOL(ivtv_debug);
1459 #ifdef CONFIG_VIDEO_ADV_DEBUG
1460 EXPORT_SYMBOL(ivtv_fw_debug);
1461 #endif
1462 EXPORT_SYMBOL(ivtv_reset_ir_gpio);
1463 EXPORT_SYMBOL(ivtv_udma_setup);
1464 EXPORT_SYMBOL(ivtv_udma_unmap);
1465 EXPORT_SYMBOL(ivtv_udma_alloc);
1466 EXPORT_SYMBOL(ivtv_udma_prepare);
1467 EXPORT_SYMBOL(ivtv_init_on_first_open);
1468 EXPORT_SYMBOL(ivtv_firmware_check);
1470 module_init(module_start);
1471 module_exit(module_cleanup);