mach-ux500: enable ARM errata 764369
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / wan / cosa.h
blob028f3d96b9717ef40ff69a21166aaed4ffe2fbf8
1 /* $Id: cosa.h,v 1.6 1999/01/06 14:02:44 kas Exp $ */
3 /*
4 * Copyright (C) 1995-1997 Jan "Yenya" Kasprzak <kas@fi.muni.cz>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 #ifndef COSA_H__
22 #define COSA_H__
24 #include <linux/ioctl.h>
26 #ifdef __KERNEL__
27 /* status register - output bits */
28 #define SR_RX_DMA_ENA 0x04 /* receiver DMA enable bit */
29 #define SR_TX_DMA_ENA 0x08 /* transmitter DMA enable bit */
30 #define SR_RST 0x10 /* SRP reset */
31 #define SR_USR_INT_ENA 0x20 /* user interrupt enable bit */
32 #define SR_TX_INT_ENA 0x40 /* transmitter interrupt enable bit */
33 #define SR_RX_INT_ENA 0x80 /* receiver interrupt enable bit */
35 /* status register - input bits */
36 #define SR_USR_RQ 0x20 /* user interrupt request pending */
37 #define SR_TX_RDY 0x40 /* transmitter empty (ready) */
38 #define SR_RX_RDY 0x80 /* receiver data ready */
40 #define SR_UP_REQUEST 0x02 /* request from SRP to transfer data
41 up to PC */
42 #define SR_DOWN_REQUEST 0x01 /* SRP is able to transfer data down
43 from PC to SRP */
44 #define SR_END_OF_TRANSFER 0x03 /* SRP signalize end of
45 transfer (up or down) */
47 #define SR_CMD_FROM_SRP_MASK 0x03 /* mask to get SRP command */
49 /* bits in driver status byte definitions : */
50 #define SR_RDY_RCV 0x01 /* ready to receive packet */
51 #define SR_RDY_SND 0x02 /* ready to send packet */
52 #define SR_CMD_PND 0x04 /* command pending */ /* not currently used */
54 /* ???? */
55 #define SR_PKT_UP 0x01 /* transfer of packet up in progress */
56 #define SR_PKT_DOWN 0x02 /* transfer of packet down in progress */
58 #endif /* __KERNEL__ */
60 #define SR_LOAD_ADDR 0x4400 /* SRP microcode load address */
61 #define SR_START_ADDR 0x4400 /* SRP microcode start address */
63 #define COSA_LOAD_ADDR 0x400 /* SRP microcode load address */
64 #define COSA_MAX_FIRMWARE_SIZE 0x10000
66 /* ioctls */
67 struct cosa_download {
68 int addr, len;
69 char __user *code;
72 /* Reset the device */
73 #define COSAIORSET _IO('C',0xf0)
75 /* Start microcode at given address */
76 #define COSAIOSTRT _IOW('C',0xf1, int)
78 /* Read the block from the device memory */
79 #define COSAIORMEM _IOWR('C',0xf2, struct cosa_download *)
80 /* actually the struct cosa_download itself; this is to keep
81 * the ioctl number same as in 2.4 in order to keep the user-space
82 * utils compatible. */
84 /* Write the block to the device memory (i.e. download the microcode) */
85 #define COSAIODOWNLD _IOW('C',0xf2, struct cosa_download *)
86 /* actually the struct cosa_download itself; this is to keep
87 * the ioctl number same as in 2.4 in order to keep the user-space
88 * utils compatible. */
90 /* Read the device type (one of "srp", "cosa", and "cosa8" for now) */
91 #define COSAIORTYPE _IOR('C',0xf3, char *)
93 /* Read the device identification string */
94 #define COSAIORIDSTR _IOR('C',0xf4, char *)
95 /* Maximum length of the identification string. */
96 #define COSA_MAX_ID_STRING 128
98 /* Increment/decrement the module usage count :-) */
99 /* #define COSAIOMINC _IO('C',0xf5) */
100 /* #define COSAIOMDEC _IO('C',0xf6) */
102 /* Get the total number of cards installed */
103 #define COSAIONRCARDS _IO('C',0xf7)
105 /* Get the number of channels on this card */
106 #define COSAIONRCHANS _IO('C',0xf8)
108 /* Set the driver for the bus-master operations */
109 #define COSAIOBMSET _IOW('C', 0xf9, unsigned short)
111 #define COSA_BM_OFF 0 /* Bus-mastering off - use ISA DMA (default) */
112 #define COSA_BM_ON 1 /* Bus-mastering on - faster but untested */
114 /* Gets the busmaster status */
115 #define COSAIOBMGET _IO('C', 0xfa)
117 #endif /* !COSA_H__ */