drm/i915: Include any alternate names by which the device is known.

[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / lib / crc32.c

/*
 * Oct 15, 2000 Matt Domsch <Matt_Domsch@dell.com>
 * Nicer crc32 functions/docs submitted by linux@horizon.com.  Thanks!
 * Code was from the public domain, copyright abandoned.  Code was
 * subsequently included in the kernel, thus was re-licensed under the
 * GNU GPL v2.
 *
 * Oct 12, 2000 Matt Domsch <Matt_Domsch@dell.com>
 * Same crc32 function was used in 5 other places in the kernel.
 * I made one version, and deleted the others.
 * There are various incantations of crc32().  Some use a seed of 0 or ~0.
 * Some xor at the end with ~0.  The generic crc32() function takes
 * seed as an argument, and doesn't xor at the end.  Then individual
 * users can do whatever they need.
 *   drivers/net/smc9194.c uses seed ~0, doesn't xor with ~0.
 *   fs/jffs2 uses seed 0, doesn't xor with ~0.
 *   fs/partitions/efi.c uses seed ~0, xor's with ~0.
 *
 * This source code is licensed under the GNU General Public License,
 * Version 2.  See the file COPYING for more details.
 */

#include <linux/crc32.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/compiler.h>
#include <linux/types.h>
#include <linux/init.h>
#include <asm/atomic.h>
#include "crc32defs.h"
#if CRC_LE_BITS == 8
# define tole(x) __constant_cpu_to_le32(x)
#else
# define tole(x) (x)
#endif

#if CRC_BE_BITS == 8
# define tobe(x) __constant_cpu_to_be32(x)
#else
# define tobe(x) (x)
#endif
#include "crc32table.h"

MODULE_AUTHOR("Matt Domsch <Matt_Domsch@dell.com>");
MODULE_DESCRIPTION("Ethernet CRC32 calculations");
MODULE_LICENSE("GPL");

#if CRC_LE_BITS == 8 || CRC_BE_BITS == 8

static inline u32
crc32_body(u32 crc, unsigned char const *buf, size_t len, const u32 (*tab)[256])
{
# ifdef __LITTLE_ENDIAN
#  define DO_CRC(x) crc = tab[0][(crc ^ (x)) & 255] ^ (crc >> 8)
#  define DO_CRC4 crc = tab[3][(crc) & 255] ^ \
                tab[2][(crc >> 8) & 255] ^ \
                tab[1][(crc >> 16) & 255] ^ \
                tab[0][(crc >> 24) & 255]
# else
#  define DO_CRC(x) crc = tab[0][((crc >> 24) ^ (x)) & 255] ^ (crc << 8)
#  define DO_CRC4 crc = tab[0][(crc) & 255] ^ \
                tab[1][(crc >> 8) & 255] ^ \
                tab[2][(crc >> 16) & 255] ^ \
                tab[3][(crc >> 24) & 255]
# endif
        const u32 *b;
        size_t    rem_len;

        /* Align it */
        if (unlikely((long)buf & 3 && len)) {
                do {
                        DO_CRC(*buf++);
                } while ((--len) && ((long)buf)&3);
        }
        rem_len = len & 3;
        /* load data 32 bits wide, xor data 32 bits wide. */
        len = len >> 2;
        b = (const u32 *)buf;
        for (--b; len; --len) {
                crc ^= *++b; /* use pre increment for speed */
                DO_CRC4;
        }
        len = rem_len;
        /* And the last few bytes */
        if (len) {
                u8 *p = (u8 *)(b + 1) - 1;
                do {
                        DO_CRC(*++p); /* use pre increment for speed */
                } while (--len);
        }
        return crc;
#undef DO_CRC
#undef DO_CRC4
}
#endif
/**
 * crc32_le() - Calculate bitwise little-endian Ethernet AUTODIN II CRC32
 * @crc: seed value for computation.  ~0 for Ethernet, sometimes 0 for
 *      other uses, or the previous crc32 value if computing incrementally.
 * @p: pointer to buffer over which CRC is run
 * @len: length of buffer @p
 */
u32 __pure crc32_le(u32 crc, unsigned char const *p, size_t len);

#if CRC_LE_BITS == 1
/*
 * In fact, the table-based code will work in this case, but it can be
 * simplified by inlining the table in ?: form.
 */

u32 __pure crc32_le(u32 crc, unsigned char const *p, size_t len)
{
        int i;
        while (len--) {
                crc ^= *p++;
                for (i = 0; i < 8; i++)
                        crc = (crc >> 1) ^ ((crc & 1) ? CRCPOLY_LE : 0);
        }
        return crc;
}
#else                           /* Table-based approach */

u32 __pure crc32_le(u32 crc, unsigned char const *p, size_t len)
{
# if CRC_LE_BITS == 8
        const u32      (*tab)[] = crc32table_le;

        crc = __cpu_to_le32(crc);
        crc = crc32_body(crc, p, len, tab);
        return __le32_to_cpu(crc);
# elif CRC_LE_BITS == 4
        while (len--) {
                crc ^= *p++;
                crc = (crc >> 4) ^ crc32table_le[crc & 15];
                crc = (crc >> 4) ^ crc32table_le[crc & 15];
        }
        return crc;
# elif CRC_LE_BITS == 2
        while (len--) {
                crc ^= *p++;
                crc = (crc >> 2) ^ crc32table_le[crc & 3];
                crc = (crc >> 2) ^ crc32table_le[crc & 3];
                crc = (crc >> 2) ^ crc32table_le[crc & 3];
                crc = (crc >> 2) ^ crc32table_le[crc & 3];
        }
        return crc;
# endif
}
#endif

/**
 * crc32_be() - Calculate bitwise big-endian Ethernet AUTODIN II CRC32
 * @crc: seed value for computation.  ~0 for Ethernet, sometimes 0 for
 *      other uses, or the previous crc32 value if computing incrementally.
 * @p: pointer to buffer over which CRC is run
 * @len: length of buffer @p
 */
u32 __pure crc32_be(u32 crc, unsigned char const *p, size_t len);

#if CRC_BE_BITS == 1
/*
 * In fact, the table-based code will work in this case, but it can be
 * simplified by inlining the table in ?: form.
 */

u32 __pure crc32_be(u32 crc, unsigned char const *p, size_t len)
{
        int i;
        while (len--) {
                crc ^= *p++ << 24;
                for (i = 0; i < 8; i++)
                        crc =
                            (crc << 1) ^ ((crc & 0x80000000) ? CRCPOLY_BE :
                                          0);
        }
        return crc;
}

#else                           /* Table-based approach */
u32 __pure crc32_be(u32 crc, unsigned char const *p, size_t len)
{
# if CRC_BE_BITS == 8
        const u32      (*tab)[] = crc32table_be;

        crc = __cpu_to_be32(crc);
        crc = crc32_body(crc, p, len, tab);
        return __be32_to_cpu(crc);
# elif CRC_BE_BITS == 4
        while (len--) {
                crc ^= *p++ << 24;
                crc = (crc << 4) ^ crc32table_be[crc >> 28];
                crc = (crc << 4) ^ crc32table_be[crc >> 28];
        }
        return crc;
# elif CRC_BE_BITS == 2
        while (len--) {
                crc ^= *p++ << 24;
                crc = (crc << 2) ^ crc32table_be[crc >> 30];
                crc = (crc << 2) ^ crc32table_be[crc >> 30];
                crc = (crc << 2) ^ crc32table_be[crc >> 30];
                crc = (crc << 2) ^ crc32table_be[crc >> 30];
        }
        return crc;
# endif
}
#endif

EXPORT_SYMBOL(crc32_le);
EXPORT_SYMBOL(crc32_be);

/*
 * A brief CRC tutorial.
 *
 * A CRC is a long-division remainder.  You add the CRC to the message,
 * and the whole thing (message+CRC) is a multiple of the given
 * CRC polynomial.  To check the CRC, you can either check that the
 * CRC matches the recomputed value, *or* you can check that the
 * remainder computed on the message+CRC is 0.  This latter approach
 * is used by a lot of hardware implementations, and is why so many
 * protocols put the end-of-frame flag after the CRC.
 *
 * It's actually the same long division you learned in school, except that
 * - We're working in binary, so the digits are only 0 and 1, and
 * - When dividing polynomials, there are no carries.  Rather than add and
 *   subtract, we just xor.  Thus, we tend to get a bit sloppy about
 *   the difference between adding and subtracting.
 *
 * A 32-bit CRC polynomial is actually 33 bits long.  But since it's
 * 33 bits long, bit 32 is always going to be set, so usually the CRC
 * is written in hex with the most significant bit omitted.  (If you're
 * familiar with the IEEE 754 floating-point format, it's the same idea.)
 *
 * Note that a CRC is computed over a string of *bits*, so you have
 * to decide on the endianness of the bits within each byte.  To get
 * the best error-detecting properties, this should correspond to the
 * order they're actually sent.  For example, standard RS-232 serial is
 * little-endian; the most significant bit (sometimes used for parity)
 * is sent last.  And when appending a CRC word to a message, you should
 * do it in the right order, matching the endianness.
 *
 * Just like with ordinary division, the remainder is always smaller than
 * the divisor (the CRC polynomial) you're dividing by.  Each step of the
 * division, you take one more digit (bit) of the dividend and append it
 * to the current remainder.  Then you figure out the appropriate multiple
 * of the divisor to subtract to being the remainder back into range.
 * In binary, it's easy - it has to be either 0 or 1, and to make the
 * XOR cancel, it's just a copy of bit 32 of the remainder.
 *
 * When computing a CRC, we don't care about the quotient, so we can
 * throw the quotient bit away, but subtract the appropriate multiple of
 * the polynomial from the remainder and we're back to where we started,
 * ready to process the next bit.
 *
 * A big-endian CRC written this way would be coded like:
 * for (i = 0; i < input_bits; i++) {
 *      multiple = remainder & 0x80000000 ? CRCPOLY : 0;
 *      remainder = (remainder << 1 | next_input_bit()) ^ multiple;
 * }
 * Notice how, to get at bit 32 of the shifted remainder, we look
 * at bit 31 of the remainder *before* shifting it.
 *
 * But also notice how the next_input_bit() bits we're shifting into
 * the remainder don't actually affect any decision-making until
 * 32 bits later.  Thus, the first 32 cycles of this are pretty boring.
 * Also, to add the CRC to a message, we need a 32-bit-long hole for it at
 * the end, so we have to add 32 extra cycles shifting in zeros at the
 * end of every message,
 *
 * So the standard trick is to rearrage merging in the next_input_bit()
 * until the moment it's needed.  Then the first 32 cycles can be precomputed,
 * and merging in the final 32 zero bits to make room for the CRC can be
 * skipped entirely.
 * This changes the code to:
 * for (i = 0; i < input_bits; i++) {
 *      remainder ^= next_input_bit() << 31;
 *      multiple = (remainder & 0x80000000) ? CRCPOLY : 0;
 *      remainder = (remainder << 1) ^ multiple;
 * }
 * With this optimization, the little-endian code is simpler:
 * for (i = 0; i < input_bits; i++) {
 *      remainder ^= next_input_bit();
 *      multiple = (remainder & 1) ? CRCPOLY : 0;
 *      remainder = (remainder >> 1) ^ multiple;
 * }
 *
 * Note that the other details of endianness have been hidden in CRCPOLY
 * (which must be bit-reversed) and next_input_bit().
 *
 * However, as long as next_input_bit is returning the bits in a sensible
 * order, we can actually do the merging 8 or more bits at a time rather
 * than one bit at a time:
 * for (i = 0; i < input_bytes; i++) {
 *      remainder ^= next_input_byte() << 24;
 *      for (j = 0; j < 8; j++) {
 *              multiple = (remainder & 0x80000000) ? CRCPOLY : 0;
 *              remainder = (remainder << 1) ^ multiple;
 *      }
 * }
 * Or in little-endian:
 * for (i = 0; i < input_bytes; i++) {
 *      remainder ^= next_input_byte();
 *      for (j = 0; j < 8; j++) {
 *              multiple = (remainder & 1) ? CRCPOLY : 0;
 *              remainder = (remainder << 1) ^ multiple;
 *      }
 * }
 * If the input is a multiple of 32 bits, you can even XOR in a 32-bit
 * word at a time and increase the inner loop count to 32.
 *
 * You can also mix and match the two loop styles, for example doing the
 * bulk of a message byte-at-a-time and adding bit-at-a-time processing
 * for any fractional bytes at the end.
 *
 * The only remaining optimization is to the byte-at-a-time table method.
 * Here, rather than just shifting one bit of the remainder to decide
 * in the correct multiple to subtract, we can shift a byte at a time.
 * This produces a 40-bit (rather than a 33-bit) intermediate remainder,
 * but again the multiple of the polynomial to subtract depends only on
 * the high bits, the high 8 bits in this case.  
 *
 * The multiple we need in that case is the low 32 bits of a 40-bit
 * value whose high 8 bits are given, and which is a multiple of the
 * generator polynomial.  This is simply the CRC-32 of the given
 * one-byte message.
 *
 * Two more details: normally, appending zero bits to a message which
 * is already a multiple of a polynomial produces a larger multiple of that
 * polynomial.  To enable a CRC to detect this condition, it's common to
 * invert the CRC before appending it.  This makes the remainder of the
 * message+crc come out not as zero, but some fixed non-zero value.
 *
 * The same problem applies to zero bits prepended to the message, and
 * a similar solution is used.  Instead of starting with a remainder of
 * 0, an initial remainder of all ones is used.  As long as you start
 * the same way on decoding, it doesn't make a difference.
 */

#ifdef UNITTEST

#include <stdlib.h>
#include <stdio.h>

#if 0                           /*Not used at present */
static void
buf_dump(char const *prefix, unsigned char const *buf, size_t len)
{
        fputs(prefix, stdout);
        while (len--)
                printf(" %02x", *buf++);
        putchar('\n');

}
#endif

static void bytereverse(unsigned char *buf, size_t len)
{
        while (len--) {
                unsigned char x = bitrev8(*buf);
                *buf++ = x;
        }
}

static void random_garbage(unsigned char *buf, size_t len)
{
        while (len--)
                *buf++ = (unsigned char) random();
}

#if 0                           /* Not used at present */
static void store_le(u32 x, unsigned char *buf)
{
        buf[0] = (unsigned char) x;
        buf[1] = (unsigned char) (x >> 8);
        buf[2] = (unsigned char) (x >> 16);
        buf[3] = (unsigned char) (x >> 24);
}
#endif

static void store_be(u32 x, unsigned char *buf)
{
        buf[0] = (unsigned char) (x >> 24);
        buf[1] = (unsigned char) (x >> 16);
        buf[2] = (unsigned char) (x >> 8);
        buf[3] = (unsigned char) x;
}

/*
 * This checks that CRC(buf + CRC(buf)) = 0, and that
 * CRC commutes with bit-reversal.  This has the side effect
 * of bytewise bit-reversing the input buffer, and returns
 * the CRC of the reversed buffer.
 */
static u32 test_step(u32 init, unsigned char *buf, size_t len)
{
        u32 crc1, crc2;
        size_t i;

        crc1 = crc32_be(init, buf, len);
        store_be(crc1, buf + len);
        crc2 = crc32_be(init, buf, len + 4);
        if (crc2)
                printf("\nCRC cancellation fail: 0x%08x should be 0\n",
                       crc2);

        for (i = 0; i <= len + 4; i++) {
                crc2 = crc32_be(init, buf, i);
                crc2 = crc32_be(crc2, buf + i, len + 4 - i);
                if (crc2)
                        printf("\nCRC split fail: 0x%08x\n", crc2);
        }

        /* Now swap it around for the other test */

        bytereverse(buf, len + 4);
        init = bitrev32(init);
        crc2 = bitrev32(crc1);
        if (crc1 != bitrev32(crc2))
                printf("\nBit reversal fail: 0x%08x -> 0x%08x -> 0x%08x\n",
                       crc1, crc2, bitrev32(crc2));
        crc1 = crc32_le(init, buf, len);
        if (crc1 != crc2)
                printf("\nCRC endianness fail: 0x%08x != 0x%08x\n", crc1,
                       crc2);
        crc2 = crc32_le(init, buf, len + 4);
        if (crc2)
                printf("\nCRC cancellation fail: 0x%08x should be 0\n",
                       crc2);

        for (i = 0; i <= len + 4; i++) {
                crc2 = crc32_le(init, buf, i);
                crc2 = crc32_le(crc2, buf + i, len + 4 - i);
                if (crc2)
                        printf("\nCRC split fail: 0x%08x\n", crc2);
        }

        return crc1;
}

#define SIZE 64
#define INIT1 0
#define INIT2 0

int main(void)
{
        unsigned char buf1[SIZE + 4];
        unsigned char buf2[SIZE + 4];
        unsigned char buf3[SIZE + 4];
        int i, j;
        u32 crc1, crc2, crc3;

        for (i = 0; i <= SIZE; i++) {
                printf("\rTesting length %d...", i);
                fflush(stdout);
                random_garbage(buf1, i);
                random_garbage(buf2, i);
                for (j = 0; j < i; j++)
                        buf3[j] = buf1[j] ^ buf2[j];

                crc1 = test_step(INIT1, buf1, i);
                crc2 = test_step(INIT2, buf2, i);
                /* Now check that CRC(buf1 ^ buf2) = CRC(buf1) ^ CRC(buf2) */
                crc3 = test_step(INIT1 ^ INIT2, buf3, i);
                if (crc3 != (crc1 ^ crc2))
                        printf("CRC XOR fail: 0x%08x != 0x%08x ^ 0x%08x\n",
                               crc3, crc1, crc2);
        }
        printf("\nAll test complete.  No failures expected.\n");
        return 0;
}

#endif                          /* UNITTEST */