isci: fix smp response frame overrun

[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / scsi / isci / request.c

/*
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
 * The full GNU General Public License is included in this distribution
 * in the file called LICENSE.GPL.
 *
 * BSD LICENSE
 *
 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *   * Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *   * Redistributions in binary form must reproduce the above copyright
 *     notice, this list of conditions and the following disclaimer in
 *     the documentation and/or other materials provided with the
 *     distribution.
 *   * Neither the name of Intel Corporation nor the names of its
 *     contributors may be used to endorse or promote products derived
 *     from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include "isci.h"
#include "task.h"
#include "request.h"
#include "sata.h"
#include "scu_completion_codes.h"
#include "scu_event_codes.h"
#include "sas.h"

/**
 * This method returns the sgl element pair for the specificed sgl_pair index.
 * @sci_req: This parameter specifies the IO request for which to retrieve
 *    the Scatter-Gather List element pair.
 * @sgl_pair_index: This parameter specifies the index into the SGL element
 *    pair to be retrieved.
 *
 * This method returns a pointer to an struct scu_sgl_element_pair.
 */
static struct scu_sgl_element_pair *scic_sds_request_get_sgl_element_pair(
        struct scic_sds_request *sci_req,
        u32 sgl_pair_index
        ) {
        struct scu_task_context *task_context;

        task_context = (struct scu_task_context *)sci_req->task_context_buffer;

        if (sgl_pair_index == 0) {
                return &task_context->sgl_pair_ab;
        } else if (sgl_pair_index == 1) {
                return &task_context->sgl_pair_cd;
        }

        return &sci_req->sg_table[sgl_pair_index - 2];
}

/**
 * This function will build the SGL list for an IO request.
 * @sci_req: This parameter specifies the IO request for which to build
 *    the Scatter-Gather List.
 *
 */
static void scic_sds_request_build_sgl(struct scic_sds_request *sds_request)
{
        struct isci_request *isci_request = sci_req_to_ireq(sds_request);
        struct isci_host *isci_host = isci_request->isci_host;
        struct sas_task *task = isci_request_access_task(isci_request);
        struct scatterlist *sg = NULL;
        dma_addr_t dma_addr;
        u32 sg_idx = 0;
        struct scu_sgl_element_pair *scu_sg   = NULL;
        struct scu_sgl_element_pair *prev_sg  = NULL;

        if (task->num_scatter > 0) {
                sg = task->scatter;

                while (sg) {
                        scu_sg = scic_sds_request_get_sgl_element_pair(
                                        sds_request,
                                        sg_idx);

                        SCU_SGL_COPY(scu_sg->A, sg);

                        sg = sg_next(sg);

                        if (sg) {
                                SCU_SGL_COPY(scu_sg->B, sg);
                                sg = sg_next(sg);
                        } else
                                SCU_SGL_ZERO(scu_sg->B);

                        if (prev_sg) {
                                dma_addr =
                                        scic_io_request_get_dma_addr(
                                                        sds_request,
                                                        scu_sg);

                                prev_sg->next_pair_upper =
                                        upper_32_bits(dma_addr);
                                prev_sg->next_pair_lower =
                                        lower_32_bits(dma_addr);
                        }

                        prev_sg = scu_sg;
                        sg_idx++;
                }
        } else {        /* handle when no sg */
                scu_sg = scic_sds_request_get_sgl_element_pair(sds_request,
                                                               sg_idx);

                dma_addr = dma_map_single(&isci_host->pdev->dev,
                                          task->scatter,
                                          task->total_xfer_len,
                                          task->data_dir);

                isci_request->zero_scatter_daddr = dma_addr;

                scu_sg->A.length = task->total_xfer_len;
                scu_sg->A.address_upper = upper_32_bits(dma_addr);
                scu_sg->A.address_lower = lower_32_bits(dma_addr);
        }

        if (scu_sg) {
                scu_sg->next_pair_upper = 0;
                scu_sg->next_pair_lower = 0;
        }
}

static void scic_sds_io_request_build_ssp_command_iu(struct scic_sds_request *sci_req)
{
        struct ssp_cmd_iu *cmd_iu;
        struct isci_request *ireq = sci_req_to_ireq(sci_req);
        struct sas_task *task = isci_request_access_task(ireq);

        cmd_iu = &sci_req->ssp.cmd;

        memcpy(cmd_iu->LUN, task->ssp_task.LUN, 8);
        cmd_iu->add_cdb_len = 0;
        cmd_iu->_r_a = 0;
        cmd_iu->_r_b = 0;
        cmd_iu->en_fburst = 0; /* unsupported */
        cmd_iu->task_prio = task->ssp_task.task_prio;
        cmd_iu->task_attr = task->ssp_task.task_attr;
        cmd_iu->_r_c = 0;

        sci_swab32_cpy(&cmd_iu->cdb, task->ssp_task.cdb,
                       sizeof(task->ssp_task.cdb) / sizeof(u32));
}

static void scic_sds_task_request_build_ssp_task_iu(struct scic_sds_request *sci_req)
{
        struct ssp_task_iu *task_iu;
        struct isci_request *ireq = sci_req_to_ireq(sci_req);
        struct sas_task *task = isci_request_access_task(ireq);
        struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq);

        task_iu = &sci_req->ssp.tmf;

        memset(task_iu, 0, sizeof(struct ssp_task_iu));

        memcpy(task_iu->LUN, task->ssp_task.LUN, 8);

        task_iu->task_func = isci_tmf->tmf_code;
        task_iu->task_tag =
                (ireq->ttype == tmf_task) ?
                isci_tmf->io_tag :
                SCI_CONTROLLER_INVALID_IO_TAG;
}

/**
 * This method is will fill in the SCU Task Context for any type of SSP request.
 * @sci_req:
 * @task_context:
 *
 */
static void scu_ssp_reqeust_construct_task_context(
        struct scic_sds_request *sds_request,
        struct scu_task_context *task_context)
{
        dma_addr_t dma_addr;
        struct scic_sds_remote_device *target_device;
        struct scic_sds_port *target_port;

        target_device = scic_sds_request_get_device(sds_request);
        target_port = scic_sds_request_get_port(sds_request);

        /* Fill in the TC with the its required data */
        task_context->abort = 0;
        task_context->priority = 0;
        task_context->initiator_request = 1;
        task_context->connection_rate = target_device->connection_rate;
        task_context->protocol_engine_index =
                scic_sds_controller_get_protocol_engine_group(controller);
        task_context->logical_port_index =
                scic_sds_port_get_index(target_port);
        task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP;
        task_context->valid = SCU_TASK_CONTEXT_VALID;
        task_context->context_type = SCU_TASK_CONTEXT_TYPE;

        task_context->remote_node_index =
                scic_sds_remote_device_get_index(sds_request->target_device);
        task_context->command_code = 0;

        task_context->link_layer_control = 0;
        task_context->do_not_dma_ssp_good_response = 1;
        task_context->strict_ordering = 0;
        task_context->control_frame = 0;
        task_context->timeout_enable = 0;
        task_context->block_guard_enable = 0;

        task_context->address_modifier = 0;

        /* task_context->type.ssp.tag = sci_req->io_tag; */
        task_context->task_phase = 0x01;

        if (sds_request->was_tag_assigned_by_user) {
                /*
                 * Build the task context now since we have already read
                 * the data
                 */
                sds_request->post_context =
                        (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
                         (scic_sds_controller_get_protocol_engine_group(
                                                        controller) <<
                          SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) |
                         (scic_sds_port_get_index(target_port) <<
                          SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) |
                          ISCI_TAG_TCI(sds_request->io_tag));
        } else {
                /*
                 * Build the task context now since we have already read
                 * the data
                 *
                 * I/O tag index is not assigned because we have to wait
                 * until we get a TCi
                 */
                sds_request->post_context =
                        (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
                         (scic_sds_controller_get_protocol_engine_group(
                                                        owning_controller) <<
                          SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) |
                         (scic_sds_port_get_index(target_port) <<
                          SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT));
        }

        /*
         * Copy the physical address for the command buffer to the
         * SCU Task Context
         */
        dma_addr = scic_io_request_get_dma_addr(sds_request,
                                                &sds_request->ssp.cmd);

        task_context->command_iu_upper = upper_32_bits(dma_addr);
        task_context->command_iu_lower = lower_32_bits(dma_addr);

        /*
         * Copy the physical address for the response buffer to the
         * SCU Task Context
         */
        dma_addr = scic_io_request_get_dma_addr(sds_request,
                                                &sds_request->ssp.rsp);

        task_context->response_iu_upper = upper_32_bits(dma_addr);
        task_context->response_iu_lower = lower_32_bits(dma_addr);
}

/**
 * This method is will fill in the SCU Task Context for a SSP IO request.
 * @sci_req:
 *
 */
static void scu_ssp_io_request_construct_task_context(
        struct scic_sds_request *sci_req,
        enum dma_data_direction dir,
        u32 len)
{
        struct scu_task_context *task_context;

        task_context = scic_sds_request_get_task_context(sci_req);

        scu_ssp_reqeust_construct_task_context(sci_req, task_context);

        task_context->ssp_command_iu_length =
                sizeof(struct ssp_cmd_iu) / sizeof(u32);
        task_context->type.ssp.frame_type = SSP_COMMAND;

        switch (dir) {
        case DMA_FROM_DEVICE:
        case DMA_NONE:
        default:
                task_context->task_type = SCU_TASK_TYPE_IOREAD;
                break;
        case DMA_TO_DEVICE:
                task_context->task_type = SCU_TASK_TYPE_IOWRITE;
                break;
        }

        task_context->transfer_length_bytes = len;

        if (task_context->transfer_length_bytes > 0)
                scic_sds_request_build_sgl(sci_req);
}

/**
 * This method will fill in the SCU Task Context for a SSP Task request.  The
 *    following important settings are utilized: -# priority ==
 *    SCU_TASK_PRIORITY_HIGH.  This ensures that the task request is issued
 *    ahead of other task destined for the same Remote Node. -# task_type ==
 *    SCU_TASK_TYPE_IOREAD.  This simply indicates that a normal request type
 *    (i.e. non-raw frame) is being utilized to perform task management. -#
 *    control_frame == 1.  This ensures that the proper endianess is set so
 *    that the bytes are transmitted in the right order for a task frame.
 * @sci_req: This parameter specifies the task request object being
 *    constructed.
 *
 */
static void scu_ssp_task_request_construct_task_context(
        struct scic_sds_request *sci_req)
{
        struct scu_task_context *task_context;

        task_context = scic_sds_request_get_task_context(sci_req);

        scu_ssp_reqeust_construct_task_context(sci_req, task_context);

        task_context->control_frame                = 1;
        task_context->priority                     = SCU_TASK_PRIORITY_HIGH;
        task_context->task_type                    = SCU_TASK_TYPE_RAW_FRAME;
        task_context->transfer_length_bytes        = 0;
        task_context->type.ssp.frame_type          = SSP_TASK;
        task_context->ssp_command_iu_length =
                sizeof(struct ssp_task_iu) / sizeof(u32);
}

/**
 * This method is will fill in the SCU Task Context for any type of SATA
 *    request.  This is called from the various SATA constructors.
 * @sci_req: The general IO request object which is to be used in
 *    constructing the SCU task context.
 * @task_context: The buffer pointer for the SCU task context which is being
 *    constructed.
 *
 * The general io request construction is complete. The buffer assignment for
 * the command buffer is complete. none Revisit task context construction to
 * determine what is common for SSP/SMP/STP task context structures.
 */
static void scu_sata_reqeust_construct_task_context(
        struct scic_sds_request *sci_req,
        struct scu_task_context *task_context)
{
        dma_addr_t dma_addr;
        struct scic_sds_remote_device *target_device;
        struct scic_sds_port *target_port;

        target_device = scic_sds_request_get_device(sci_req);
        target_port = scic_sds_request_get_port(sci_req);

        /* Fill in the TC with the its required data */
        task_context->abort = 0;
        task_context->priority = SCU_TASK_PRIORITY_NORMAL;
        task_context->initiator_request = 1;
        task_context->connection_rate = target_device->connection_rate;
        task_context->protocol_engine_index =
                scic_sds_controller_get_protocol_engine_group(controller);
        task_context->logical_port_index =
                scic_sds_port_get_index(target_port);
        task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_STP;
        task_context->valid = SCU_TASK_CONTEXT_VALID;
        task_context->context_type = SCU_TASK_CONTEXT_TYPE;

        task_context->remote_node_index =
                scic_sds_remote_device_get_index(sci_req->target_device);
        task_context->command_code = 0;

        task_context->link_layer_control = 0;
        task_context->do_not_dma_ssp_good_response = 1;
        task_context->strict_ordering = 0;
        task_context->control_frame = 0;
        task_context->timeout_enable = 0;
        task_context->block_guard_enable = 0;

        task_context->address_modifier = 0;
        task_context->task_phase = 0x01;

        task_context->ssp_command_iu_length =
                (sizeof(struct host_to_dev_fis) - sizeof(u32)) / sizeof(u32);

        /* Set the first word of the H2D REG FIS */
        task_context->type.words[0] = *(u32 *)&sci_req->stp.cmd;

        if (sci_req->was_tag_assigned_by_user) {
                /*
                 * Build the task context now since we have already read
                 * the data
                 */
                sci_req->post_context =
                        (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
                         (scic_sds_controller_get_protocol_engine_group(
                                                        controller) <<
                          SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) |
                         (scic_sds_port_get_index(target_port) <<
                          SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) |
                          ISCI_TAG_TCI(sci_req->io_tag));
        } else {
                /*
                 * Build the task context now since we have already read
                 * the data.
                 * I/O tag index is not assigned because we have to wait
                 * until we get a TCi.
                 */
                sci_req->post_context =
                        (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
                         (scic_sds_controller_get_protocol_engine_group(
                                                        controller) <<
                          SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) |
                         (scic_sds_port_get_index(target_port) <<
                          SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT));
        }

        /*
         * Copy the physical address for the command buffer to the SCU Task
         * Context. We must offset the command buffer by 4 bytes because the
         * first 4 bytes are transfered in the body of the TC.
         */
        dma_addr = scic_io_request_get_dma_addr(sci_req,
                                                ((char *) &sci_req->stp.cmd) +
                                                sizeof(u32));

        task_context->command_iu_upper = upper_32_bits(dma_addr);
        task_context->command_iu_lower = lower_32_bits(dma_addr);

        /* SATA Requests do not have a response buffer */
        task_context->response_iu_upper = 0;
        task_context->response_iu_lower = 0;
}



/**
 * scu_stp_raw_request_construct_task_context -
 * @sci_req: This parameter specifies the STP request object for which to
 *    construct a RAW command frame task context.
 * @task_context: This parameter specifies the SCU specific task context buffer
 *    to construct.
 *
 * This method performs the operations common to all SATA/STP requests
 * utilizing the raw frame method. none
 */
static void scu_stp_raw_request_construct_task_context(struct scic_sds_stp_request *stp_req,
                                                       struct scu_task_context *task_context)
{
        struct scic_sds_request *sci_req = to_sci_req(stp_req);

        scu_sata_reqeust_construct_task_context(sci_req, task_context);

        task_context->control_frame         = 0;
        task_context->priority              = SCU_TASK_PRIORITY_NORMAL;
        task_context->task_type             = SCU_TASK_TYPE_SATA_RAW_FRAME;
        task_context->type.stp.fis_type     = FIS_REGH2D;
        task_context->transfer_length_bytes = sizeof(struct host_to_dev_fis) - sizeof(u32);
}

static enum sci_status
scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_req,
                                   bool copy_rx_frame)
{
        struct scic_sds_stp_request *stp_req = &sci_req->stp.req;
        struct scic_sds_stp_pio_request *pio = &stp_req->type.pio;

        scu_stp_raw_request_construct_task_context(stp_req,
                                                   sci_req->task_context_buffer);

        pio->current_transfer_bytes = 0;
        pio->ending_error = 0;
        pio->ending_status = 0;

        pio->request_current.sgl_offset = 0;
        pio->request_current.sgl_set = SCU_SGL_ELEMENT_PAIR_A;

        if (copy_rx_frame) {
                scic_sds_request_build_sgl(sci_req);
                /* Since the IO request copy of the TC contains the same data as
                 * the actual TC this pointer is vaild for either.
                 */
                pio->request_current.sgl_pair = &sci_req->task_context_buffer->sgl_pair_ab;
        } else {
                /* The user does not want the data copied to the SGL buffer location */
                pio->request_current.sgl_pair = NULL;
        }

        return SCI_SUCCESS;
}

/**
 *
 * @sci_req: This parameter specifies the request to be constructed as an
 *    optimized request.
 * @optimized_task_type: This parameter specifies whether the request is to be
 *    an UDMA request or a NCQ request. - A value of 0 indicates UDMA. - A
 *    value of 1 indicates NCQ.
 *
 * This method will perform request construction common to all types of STP
 * requests that are optimized by the silicon (i.e. UDMA, NCQ). This method
 * returns an indication as to whether the construction was successful.
 */
static void scic_sds_stp_optimized_request_construct(struct scic_sds_request *sci_req,
                                                     u8 optimized_task_type,
                                                     u32 len,
                                                     enum dma_data_direction dir)
{
        struct scu_task_context *task_context = sci_req->task_context_buffer;

        /* Build the STP task context structure */
        scu_sata_reqeust_construct_task_context(sci_req, task_context);

        /* Copy over the SGL elements */
        scic_sds_request_build_sgl(sci_req);

        /* Copy over the number of bytes to be transfered */
        task_context->transfer_length_bytes = len;

        if (dir == DMA_TO_DEVICE) {
                /*
                 * The difference between the DMA IN and DMA OUT request task type
                 * values are consistent with the difference between FPDMA READ
                 * and FPDMA WRITE values.  Add the supplied task type parameter
                 * to this difference to set the task type properly for this
                 * DATA OUT (WRITE) case. */
                task_context->task_type = optimized_task_type + (SCU_TASK_TYPE_DMA_OUT
                                                                 - SCU_TASK_TYPE_DMA_IN);
        } else {
                /*
                 * For the DATA IN (READ) case, simply save the supplied
                 * optimized task type. */
                task_context->task_type = optimized_task_type;
        }
}



static enum sci_status
scic_io_request_construct_sata(struct scic_sds_request *sci_req,
                               u32 len,
                               enum dma_data_direction dir,
                               bool copy)
{
        enum sci_status status = SCI_SUCCESS;
        struct isci_request *ireq = sci_req_to_ireq(sci_req);
        struct sas_task *task = isci_request_access_task(ireq);

        /* check for management protocols */
        if (ireq->ttype == tmf_task) {
                struct isci_tmf *tmf = isci_request_access_tmf(ireq);

                if (tmf->tmf_code == isci_tmf_sata_srst_high ||
                    tmf->tmf_code == isci_tmf_sata_srst_low) {
                        scu_stp_raw_request_construct_task_context(&sci_req->stp.req,
                                                                   sci_req->task_context_buffer);
                        return SCI_SUCCESS;
                } else {
                        dev_err(scic_to_dev(sci_req->owning_controller),
                                "%s: Request 0x%p received un-handled SAT "
                                "management protocol 0x%x.\n",
                                __func__, sci_req, tmf->tmf_code);

                        return SCI_FAILURE;
                }
        }

        if (!sas_protocol_ata(task->task_proto)) {
                dev_err(scic_to_dev(sci_req->owning_controller),
                        "%s: Non-ATA protocol in SATA path: 0x%x\n",
                        __func__,
                        task->task_proto);
                return SCI_FAILURE;

        }

        /* non data */
        if (task->data_dir == DMA_NONE) {
                scu_stp_raw_request_construct_task_context(&sci_req->stp.req,
                                                           sci_req->task_context_buffer);
                return SCI_SUCCESS;
        }

        /* NCQ */
        if (task->ata_task.use_ncq) {
                scic_sds_stp_optimized_request_construct(sci_req,
                                                         SCU_TASK_TYPE_FPDMAQ_READ,
                                                         len, dir);
                return SCI_SUCCESS;
        }

        /* DMA */
        if (task->ata_task.dma_xfer) {
                scic_sds_stp_optimized_request_construct(sci_req,
                                                         SCU_TASK_TYPE_DMA_IN,
                                                         len, dir);
                return SCI_SUCCESS;
        } else /* PIO */
                return scic_sds_stp_pio_request_construct(sci_req, copy);

        return status;
}

static enum sci_status scic_io_request_construct_basic_ssp(struct scic_sds_request *sci_req)
{
        struct isci_request *ireq = sci_req_to_ireq(sci_req);
        struct sas_task *task = isci_request_access_task(ireq);

        sci_req->protocol = SCIC_SSP_PROTOCOL;

        scu_ssp_io_request_construct_task_context(sci_req,
                                                  task->data_dir,
                                                  task->total_xfer_len);

        scic_sds_io_request_build_ssp_command_iu(sci_req);

        sci_change_state(&sci_req->sm, SCI_REQ_CONSTRUCTED);

        return SCI_SUCCESS;
}

enum sci_status scic_task_request_construct_ssp(
        struct scic_sds_request *sci_req)
{
        /* Construct the SSP Task SCU Task Context */
        scu_ssp_task_request_construct_task_context(sci_req);

        /* Fill in the SSP Task IU */
        scic_sds_task_request_build_ssp_task_iu(sci_req);

        sci_change_state(&sci_req->sm, SCI_REQ_CONSTRUCTED);

        return SCI_SUCCESS;
}

static enum sci_status scic_io_request_construct_basic_sata(struct scic_sds_request *sci_req)
{
        enum sci_status status;
        bool copy = false;
        struct isci_request *isci_request = sci_req_to_ireq(sci_req);
        struct sas_task *task = isci_request_access_task(isci_request);

        sci_req->protocol = SCIC_STP_PROTOCOL;

        copy = (task->data_dir == DMA_NONE) ? false : true;

        status = scic_io_request_construct_sata(sci_req,
                                                task->total_xfer_len,
                                                task->data_dir,
                                                copy);

        if (status == SCI_SUCCESS)
                sci_change_state(&sci_req->sm, SCI_REQ_CONSTRUCTED);

        return status;
}

enum sci_status scic_task_request_construct_sata(struct scic_sds_request *sci_req)
{
        enum sci_status status = SCI_SUCCESS;
        struct isci_request *ireq = sci_req_to_ireq(sci_req);

        /* check for management protocols */
        if (ireq->ttype == tmf_task) {
                struct isci_tmf *tmf = isci_request_access_tmf(ireq);

                if (tmf->tmf_code == isci_tmf_sata_srst_high ||
                    tmf->tmf_code == isci_tmf_sata_srst_low) {
                        scu_stp_raw_request_construct_task_context(&sci_req->stp.req,
                                                                   sci_req->task_context_buffer);
                } else {
                        dev_err(scic_to_dev(sci_req->owning_controller),
                                "%s: Request 0x%p received un-handled SAT "
                                "Protocol 0x%x.\n",
                                __func__, sci_req, tmf->tmf_code);

                        return SCI_FAILURE;
                }
        }

        if (status != SCI_SUCCESS)
                return status;
        sci_change_state(&sci_req->sm, SCI_REQ_CONSTRUCTED);

        return status;
}

/**
 * sci_req_tx_bytes - bytes transferred when reply underruns request
 * @sci_req: request that was terminated early
 */
#define SCU_TASK_CONTEXT_SRAM 0x200000
static u32 sci_req_tx_bytes(struct scic_sds_request *sci_req)
{
        struct scic_sds_controller *scic = sci_req->owning_controller;
        u32 ret_val = 0;

        if (readl(&scic->smu_registers->address_modifier) == 0) {
                void __iomem *scu_reg_base = scic->scu_registers;

                /* get the bytes of data from the Address == BAR1 + 20002Ch + (256*TCi) where
                 *   BAR1 is the scu_registers
                 *   0x20002C = 0x200000 + 0x2c
                 *            = start of task context SRAM + offset of (type.ssp.data_offset)
                 *   TCi is the io_tag of struct scic_sds_request
                 */
                ret_val = readl(scu_reg_base +
                                (SCU_TASK_CONTEXT_SRAM + offsetof(struct scu_task_context, type.ssp.data_offset)) +
                                ((sizeof(struct scu_task_context)) * ISCI_TAG_TCI(sci_req->io_tag)));
        }

        return ret_val;
}

enum sci_status scic_sds_request_start(struct scic_sds_request *sci_req)
{
        struct scic_sds_controller *scic = sci_req->owning_controller;
        struct scu_task_context *task_context;
        enum sci_base_request_states state;

        state = sci_req->sm.current_state_id;
        if (state != SCI_REQ_CONSTRUCTED) {
                dev_warn(scic_to_dev(scic),
                        "%s: SCIC IO Request requested to start while in wrong "
                         "state %d\n", __func__, state);
                return SCI_FAILURE_INVALID_STATE;
        }

        /* if necessary, allocate a TCi for the io request object and then will,
         * if necessary, copy the constructed TC data into the actual TC buffer.
         * If everything is successful the post context field is updated with
         * the TCi so the controller can post the request to the hardware.
         */
        if (sci_req->io_tag == SCI_CONTROLLER_INVALID_IO_TAG)
                sci_req->io_tag = scic_controller_allocate_io_tag(scic);

        /* Record the IO Tag in the request */
        if (sci_req->io_tag != SCI_CONTROLLER_INVALID_IO_TAG) {
                task_context = sci_req->task_context_buffer;

                task_context->task_index = ISCI_TAG_TCI(sci_req->io_tag);

                switch (task_context->protocol_type) {
                case SCU_TASK_CONTEXT_PROTOCOL_SMP:
                case SCU_TASK_CONTEXT_PROTOCOL_SSP:
                        /* SSP/SMP Frame */
                        task_context->type.ssp.tag = sci_req->io_tag;
                        task_context->type.ssp.target_port_transfer_tag =
                                0xFFFF;
                        break;

                case SCU_TASK_CONTEXT_PROTOCOL_STP:
                        /* STP/SATA Frame
                         * task_context->type.stp.ncq_tag = sci_req->ncq_tag;
                         */
                        break;

                case SCU_TASK_CONTEXT_PROTOCOL_NONE:
                        /* / @todo When do we set no protocol type? */
                        break;

                default:
                        /* This should never happen since we build the IO
                         * requests */
                        break;
                }

                /*
                 * Check to see if we need to copy the task context buffer
                 * or have been building into the task context buffer */
                if (sci_req->was_tag_assigned_by_user == false)
                        scic_sds_controller_copy_task_context(scic, sci_req);

                /* Add to the post_context the io tag value */
                sci_req->post_context |= ISCI_TAG_TCI(sci_req->io_tag);

                /* Everything is good go ahead and change state */
                sci_change_state(&sci_req->sm, SCI_REQ_STARTED);

                return SCI_SUCCESS;
        }

        return SCI_FAILURE_INSUFFICIENT_RESOURCES;
}

enum sci_status
scic_sds_io_request_terminate(struct scic_sds_request *sci_req)
{
        enum sci_base_request_states state;

        state = sci_req->sm.current_state_id;

        switch (state) {
        case SCI_REQ_CONSTRUCTED:
                scic_sds_request_set_status(sci_req,
                        SCU_TASK_DONE_TASK_ABORT,
                        SCI_FAILURE_IO_TERMINATED);

                sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
                return SCI_SUCCESS;
        case SCI_REQ_STARTED:
        case SCI_REQ_TASK_WAIT_TC_COMP:
        case SCI_REQ_SMP_WAIT_RESP:
        case SCI_REQ_SMP_WAIT_TC_COMP:
        case SCI_REQ_STP_UDMA_WAIT_TC_COMP:
        case SCI_REQ_STP_UDMA_WAIT_D2H:
        case SCI_REQ_STP_NON_DATA_WAIT_H2D:
        case SCI_REQ_STP_NON_DATA_WAIT_D2H:
        case SCI_REQ_STP_PIO_WAIT_H2D:
        case SCI_REQ_STP_PIO_WAIT_FRAME:
        case SCI_REQ_STP_PIO_DATA_IN:
        case SCI_REQ_STP_PIO_DATA_OUT:
        case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED:
        case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG:
        case SCI_REQ_STP_SOFT_RESET_WAIT_D2H:
                sci_change_state(&sci_req->sm, SCI_REQ_ABORTING);
                return SCI_SUCCESS;
        case SCI_REQ_TASK_WAIT_TC_RESP:
                sci_change_state(&sci_req->sm, SCI_REQ_ABORTING);
                sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
                return SCI_SUCCESS;
        case SCI_REQ_ABORTING:
                sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
                return SCI_SUCCESS;
        case SCI_REQ_COMPLETED:
        default:
                dev_warn(scic_to_dev(sci_req->owning_controller),
                         "%s: SCIC IO Request requested to abort while in wrong "
                         "state %d\n",
                         __func__,
                         sci_req->sm.current_state_id);
                break;
        }

        return SCI_FAILURE_INVALID_STATE;
}

enum sci_status scic_sds_request_complete(struct scic_sds_request *sci_req)
{
        enum sci_base_request_states state;
        struct scic_sds_controller *scic = sci_req->owning_controller;

        state = sci_req->sm.current_state_id;
        if (WARN_ONCE(state != SCI_REQ_COMPLETED,
                      "isci: request completion from wrong state (%d)\n", state))
                return SCI_FAILURE_INVALID_STATE;

        if (!sci_req->was_tag_assigned_by_user)
                scic_controller_free_io_tag(scic, sci_req->io_tag);

        if (sci_req->saved_rx_frame_index != SCU_INVALID_FRAME_INDEX)
                scic_sds_controller_release_frame(scic,
                                                  sci_req->saved_rx_frame_index);

        /* XXX can we just stop the machine and remove the 'final' state? */
        sci_change_state(&sci_req->sm, SCI_REQ_FINAL);
        return SCI_SUCCESS;
}

enum sci_status scic_sds_io_request_event_handler(struct scic_sds_request *sci_req,
                                                  u32 event_code)
{
        enum sci_base_request_states state;
        struct scic_sds_controller *scic = sci_req->owning_controller;

        state = sci_req->sm.current_state_id;

        if (state != SCI_REQ_STP_PIO_DATA_IN) {
                dev_warn(scic_to_dev(scic), "%s: (%x) in wrong state %d\n",
                         __func__, event_code, state);

                return SCI_FAILURE_INVALID_STATE;
        }

        switch (scu_get_event_specifier(event_code)) {
        case SCU_TASK_DONE_CRC_ERR << SCU_EVENT_SPECIFIC_CODE_SHIFT:
                /* We are waiting for data and the SCU has R_ERR the data frame.
                 * Go back to waiting for the D2H Register FIS
                 */
                sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_WAIT_FRAME);
                return SCI_SUCCESS;
        default:
                dev_err(scic_to_dev(scic),
                        "%s: pio request unexpected event %#x\n",
                        __func__, event_code);

                /* TODO Should we fail the PIO request when we get an
                 * unexpected event?
                 */
                return SCI_FAILURE;
        }
}

/*
 * This function copies response data for requests returning response data
 *    instead of sense data.
 * @sci_req: This parameter specifies the request object for which to copy
 *    the response data.
 */
static void scic_sds_io_request_copy_response(struct scic_sds_request *sci_req)
{
        void *resp_buf;
        u32 len;
        struct ssp_response_iu *ssp_response;
        struct isci_request *ireq = sci_req_to_ireq(sci_req);
        struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq);

        ssp_response = &sci_req->ssp.rsp;

        resp_buf = &isci_tmf->resp.resp_iu;

        len = min_t(u32,
                    SSP_RESP_IU_MAX_SIZE,
                    be32_to_cpu(ssp_response->response_data_len));

        memcpy(resp_buf, ssp_response->resp_data, len);
}

static enum sci_status
request_started_state_tc_event(struct scic_sds_request *sci_req,
                               u32 completion_code)
{
        struct ssp_response_iu *resp_iu;
        u8 datapres;

        /* TODO: Any SDMA return code of other than 0 is bad decode 0x003C0000
         * to determine SDMA status
         */
        switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
                scic_sds_request_set_status(sci_req,
                                            SCU_TASK_DONE_GOOD,
                                            SCI_SUCCESS);
                break;
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EARLY_RESP): {
                /* There are times when the SCU hardware will return an early
                 * response because the io request specified more data than is
                 * returned by the target device (mode pages, inquiry data,
                 * etc.).  We must check the response stats to see if this is
                 * truly a failed request or a good request that just got
                 * completed early.
                 */
                struct ssp_response_iu *resp = &sci_req->ssp.rsp;
                ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32);

                sci_swab32_cpy(&sci_req->ssp.rsp,
                               &sci_req->ssp.rsp,
                               word_cnt);

                if (resp->status == 0) {
                        scic_sds_request_set_status(sci_req,
                                                    SCU_TASK_DONE_GOOD,
                                                    SCI_SUCCESS_IO_DONE_EARLY);
                } else {
                        scic_sds_request_set_status(sci_req,
                                                    SCU_TASK_DONE_CHECK_RESPONSE,
                                                    SCI_FAILURE_IO_RESPONSE_VALID);
                }
                break;
        }
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CHECK_RESPONSE): {
                ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32);

                sci_swab32_cpy(&sci_req->ssp.rsp,
                               &sci_req->ssp.rsp,
                               word_cnt);

                scic_sds_request_set_status(sci_req,
                                            SCU_TASK_DONE_CHECK_RESPONSE,
                                            SCI_FAILURE_IO_RESPONSE_VALID);
                break;
        }

        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RESP_LEN_ERR):
                /* TODO With TASK_DONE_RESP_LEN_ERR is the response frame
                 * guaranteed to be received before this completion status is
                 * posted?
                 */
                resp_iu = &sci_req->ssp.rsp;
                datapres = resp_iu->datapres;

                if (datapres == 1 || datapres == 2) {
                        scic_sds_request_set_status(sci_req,
                                                    SCU_TASK_DONE_CHECK_RESPONSE,
                                                    SCI_FAILURE_IO_RESPONSE_VALID);
                } else
                        scic_sds_request_set_status(sci_req,
                                                    SCU_TASK_DONE_GOOD,
                                                    SCI_SUCCESS);
                break;
        /* only stp device gets suspended. */
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_PERR):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_NAK_ERR):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_DATA_LEN_ERR):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_ABORT_ERR):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_XR_WD_LEN):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_RESP):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_SDBFIS):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDB_ERR):
                if (sci_req->protocol == SCIC_STP_PROTOCOL) {
                        scic_sds_request_set_status(sci_req,
                                SCU_GET_COMPLETION_TL_STATUS(completion_code) >>
                                SCU_COMPLETION_TL_STATUS_SHIFT,
                                SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED);
                } else {
                        scic_sds_request_set_status(sci_req,
                                SCU_GET_COMPLETION_TL_STATUS(completion_code) >>
                                SCU_COMPLETION_TL_STATUS_SHIFT,
                                SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);
                }
                break;

        /* both stp/ssp device gets suspended */
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LF_ERR):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_WRONG_DESTINATION):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_BAD_DESTINATION):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_ZONE_VIOLATION):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED):
                scic_sds_request_set_status(sci_req,
                                            SCU_GET_COMPLETION_TL_STATUS(completion_code) >>
                                            SCU_COMPLETION_TL_STATUS_SHIFT,
                                            SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED);
                break;

        /* neither ssp nor stp gets suspended. */
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_NAK_CMD_ERR):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_XR):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_XR_IU_LEN_ERR):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDMA_ERR):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_OFFSET_ERR):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EXCESS_DATA):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_DATA):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_OPEN_FAIL):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_VIIT_ENTRY_NV):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_IIT_ENTRY_NV):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RNCNV_OUTBOUND):
        default:
                scic_sds_request_set_status(
                        sci_req,
                        SCU_GET_COMPLETION_TL_STATUS(completion_code) >>
                        SCU_COMPLETION_TL_STATUS_SHIFT,
                        SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);
                break;
        }

        /*
         * TODO: This is probably wrong for ACK/NAK timeout conditions
         */

        /* In all cases we will treat this as the completion of the IO req. */
        sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
        return SCI_SUCCESS;
}

static enum sci_status
request_aborting_state_tc_event(struct scic_sds_request *sci_req,
                                u32 completion_code)
{
        switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
        case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT):
        case (SCU_TASK_DONE_TASK_ABORT << SCU_COMPLETION_TL_STATUS_SHIFT):
                scic_sds_request_set_status(sci_req, SCU_TASK_DONE_TASK_ABORT,
                                            SCI_FAILURE_IO_TERMINATED);

                sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
                break;

        default:
                /* Unless we get some strange error wait for the task abort to complete
                 * TODO: Should there be a state change for this completion?
                 */
                break;
        }

        return SCI_SUCCESS;
}

static enum sci_status ssp_task_request_await_tc_event(struct scic_sds_request *sci_req,
                                                       u32 completion_code)
{
        switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
                scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD,
                                            SCI_SUCCESS);

                sci_change_state(&sci_req->sm, SCI_REQ_TASK_WAIT_TC_RESP);
                break;
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO):
                /* Currently, the decision is to simply allow the task request
                 * to timeout if the task IU wasn't received successfully.
                 * There is a potential for receiving multiple task responses if
                 * we decide to send the task IU again.
                 */
                dev_warn(scic_to_dev(sci_req->owning_controller),
                         "%s: TaskRequest:0x%p CompletionCode:%x - "
                         "ACK/NAK timeout\n", __func__, sci_req,
                         completion_code);

                sci_change_state(&sci_req->sm, SCI_REQ_TASK_WAIT_TC_RESP);
                break;
        default:
                /*
                 * All other completion status cause the IO to be complete.
                 * If a NAK was received, then it is up to the user to retry
                 * the request.
                 */
                scic_sds_request_set_status(sci_req,
                        SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
                        SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);

                sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
                break;
        }

        return SCI_SUCCESS;
}

static enum sci_status
smp_request_await_response_tc_event(struct scic_sds_request *sci_req,
                                    u32 completion_code)
{
        switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
                /* In the AWAIT RESPONSE state, any TC completion is
                 * unexpected.  but if the TC has success status, we
                 * complete the IO anyway.
                 */
                scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD,
                                            SCI_SUCCESS);

                sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
                break;

        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR):
                /* These status has been seen in a specific LSI
                 * expander, which sometimes is not able to send smp
                 * response within 2 ms. This causes our hardware break
                 * the connection and set TC completion with one of
                 * these SMP_XXX_XX_ERR status. For these type of error,
                 * we ask scic user to retry the request.
                 */
                scic_sds_request_set_status(sci_req, SCU_TASK_DONE_SMP_RESP_TO_ERR,
                                            SCI_FAILURE_RETRY_REQUIRED);

                sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
                break;

        default:
                /* All other completion status cause the IO to be complete.  If a NAK
                 * was received, then it is up to the user to retry the request
                 */
                scic_sds_request_set_status(sci_req,
                                            SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
                                            SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);

                sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
                break;
        }

        return SCI_SUCCESS;
}

static enum sci_status
smp_request_await_tc_event(struct scic_sds_request *sci_req,
                           u32 completion_code)
{
        switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
                scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD,
                                            SCI_SUCCESS);

                sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
                break;
        default:
                /* All other completion status cause the IO to be
                 * complete.  If a NAK was received, then it is up to
                 * the user to retry the request.
                 */
                scic_sds_request_set_status(sci_req,
                                            SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
                                            SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);

                sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
                break;
        }

        return SCI_SUCCESS;
}

void scic_stp_io_request_set_ncq_tag(struct scic_sds_request *req,
                                     u16 ncq_tag)
{
        /**
         * @note This could be made to return an error to the user if the user
         *       attempts to set the NCQ tag in the wrong state.
         */
        req->task_context_buffer->type.stp.ncq_tag = ncq_tag;
}

/**
 *
 * @sci_req:
 *
 * Get the next SGL element from the request. - Check on which SGL element pair
 * we are working - if working on SLG pair element A - advance to element B -
 * else - check to see if there are more SGL element pairs for this IO request
 * - if there are more SGL element pairs - advance to the next pair and return
 * element A struct scu_sgl_element*
 */
static struct scu_sgl_element *scic_sds_stp_request_pio_get_next_sgl(struct scic_sds_stp_request *stp_req)
{
        struct scu_sgl_element *current_sgl;
        struct scic_sds_request *sci_req = to_sci_req(stp_req);
        struct scic_sds_request_pio_sgl *pio_sgl = &stp_req->type.pio.request_current;

        if (pio_sgl->sgl_set == SCU_SGL_ELEMENT_PAIR_A) {
                if (pio_sgl->sgl_pair->B.address_lower == 0 &&
                    pio_sgl->sgl_pair->B.address_upper == 0) {
                        current_sgl = NULL;
                } else {
                        pio_sgl->sgl_set = SCU_SGL_ELEMENT_PAIR_B;
                        current_sgl = &pio_sgl->sgl_pair->B;
                }
        } else {
                if (pio_sgl->sgl_pair->next_pair_lower == 0 &&
                    pio_sgl->sgl_pair->next_pair_upper == 0) {
                        current_sgl = NULL;
                } else {
                        u64 phys_addr;

                        phys_addr = pio_sgl->sgl_pair->next_pair_upper;
                        phys_addr <<= 32;
                        phys_addr |= pio_sgl->sgl_pair->next_pair_lower;

                        pio_sgl->sgl_pair = scic_request_get_virt_addr(sci_req, phys_addr);
                        pio_sgl->sgl_set = SCU_SGL_ELEMENT_PAIR_A;
                        current_sgl = &pio_sgl->sgl_pair->A;
                }
        }

        return current_sgl;
}

static enum sci_status
stp_request_non_data_await_h2d_tc_event(struct scic_sds_request *sci_req,
                                        u32 completion_code)
{
        switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
                scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD,
                                            SCI_SUCCESS);

                sci_change_state(&sci_req->sm, SCI_REQ_STP_NON_DATA_WAIT_D2H);
                break;

        default:
                /* All other completion status cause the IO to be
                 * complete.  If a NAK was received, then it is up to
                 * the user to retry the request.
                 */
                scic_sds_request_set_status(sci_req,
                                            SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
                                            SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);

                sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
                break;
        }

        return SCI_SUCCESS;
}

#define SCU_MAX_FRAME_BUFFER_SIZE  0x400  /* 1K is the maximum SCU frame data payload */

/* transmit DATA_FIS from (current sgl + offset) for input
 * parameter length. current sgl and offset is alreay stored in the IO request
 */
static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame(
        struct scic_sds_request *sci_req,
        u32 length)
{
        struct scic_sds_controller *scic = sci_req->owning_controller;
        struct scic_sds_stp_request *stp_req = &sci_req->stp.req;
        struct scu_task_context *task_context;
        struct scu_sgl_element *current_sgl;

        /* Recycle the TC and reconstruct it for sending out DATA FIS containing
         * for the data from current_sgl+offset for the input length
         */
        task_context = scic_sds_controller_get_task_context_buffer(scic,
                                                                   sci_req->io_tag);

        if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A)
                current_sgl = &stp_req->type.pio.request_current.sgl_pair->A;
        else
                current_sgl = &stp_req->type.pio.request_current.sgl_pair->B;

        /* update the TC */
        task_context->command_iu_upper = current_sgl->address_upper;
        task_context->command_iu_lower = current_sgl->address_lower;
        task_context->transfer_length_bytes = length;
        task_context->type.stp.fis_type = FIS_DATA;

        /* send the new TC out. */
        return scic_controller_continue_io(sci_req);
}

static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data(struct scic_sds_request *sci_req)
{

        struct scu_sgl_element *current_sgl;
        u32 sgl_offset;
        u32 remaining_bytes_in_current_sgl = 0;
        enum sci_status status = SCI_SUCCESS;
        struct scic_sds_stp_request *stp_req = &sci_req->stp.req;

        sgl_offset = stp_req->type.pio.request_current.sgl_offset;

        if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) {
                current_sgl = &(stp_req->type.pio.request_current.sgl_pair->A);
                remaining_bytes_in_current_sgl = stp_req->type.pio.request_current.sgl_pair->A.length - sgl_offset;
        } else {
                current_sgl = &(stp_req->type.pio.request_current.sgl_pair->B);
                remaining_bytes_in_current_sgl = stp_req->type.pio.request_current.sgl_pair->B.length - sgl_offset;
        }


        if (stp_req->type.pio.pio_transfer_bytes > 0) {
                if (stp_req->type.pio.pio_transfer_bytes >= remaining_bytes_in_current_sgl) {
                        /* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = remaining_bytes_in_current_sgl */
                        status = scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, remaining_bytes_in_current_sgl);
                        if (status == SCI_SUCCESS) {
                                stp_req->type.pio.pio_transfer_bytes -= remaining_bytes_in_current_sgl;

                                /* update the current sgl, sgl_offset and save for future */
                                current_sgl = scic_sds_stp_request_pio_get_next_sgl(stp_req);
                                sgl_offset = 0;
                        }
                } else if (stp_req->type.pio.pio_transfer_bytes < remaining_bytes_in_current_sgl) {
                        /* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = type.pio.pio_transfer_bytes */
                        scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, stp_req->type.pio.pio_transfer_bytes);

                        if (status == SCI_SUCCESS) {
                                /* Sgl offset will be adjusted and saved for future */
                                sgl_offset += stp_req->type.pio.pio_transfer_bytes;
                                current_sgl->address_lower += stp_req->type.pio.pio_transfer_bytes;
                                stp_req->type.pio.pio_transfer_bytes = 0;
                        }
                }
        }

        if (status == SCI_SUCCESS) {
                stp_req->type.pio.request_current.sgl_offset = sgl_offset;
        }

        return status;
}

/**
 *
 * @stp_request: The request that is used for the SGL processing.
 * @data_buffer: The buffer of data to be copied.
 * @length: The length of the data transfer.
 *
 * Copy the data from the buffer for the length specified to the IO reqeust SGL
 * specified data region. enum sci_status
 */
static enum sci_status
scic_sds_stp_request_pio_data_in_copy_data_buffer(struct scic_sds_stp_request *stp_req,
                                                  u8 *data_buf, u32 len)
{
        struct scic_sds_request *sci_req;
        struct isci_request *ireq;
        u8 *src_addr;
        int copy_len;
        struct sas_task *task;
        struct scatterlist *sg;
        void *kaddr;
        int total_len = len;

        sci_req = to_sci_req(stp_req);
        ireq = sci_req_to_ireq(sci_req);
        task = isci_request_access_task(ireq);
        src_addr = data_buf;

        if (task->num_scatter > 0) {
                sg = task->scatter;

                while (total_len > 0) {
                        struct page *page = sg_page(sg);

                        copy_len = min_t(int, total_len, sg_dma_len(sg));
                        kaddr = kmap_atomic(page, KM_IRQ0);
                        memcpy(kaddr + sg->offset, src_addr, copy_len);
                        kunmap_atomic(kaddr, KM_IRQ0);
                        total_len -= copy_len;
                        src_addr += copy_len;
                        sg = sg_next(sg);
                }
        } else {
                BUG_ON(task->total_xfer_len < total_len);
                memcpy(task->scatter, src_addr, total_len);
        }

        return SCI_SUCCESS;
}

/**
 *
 * @sci_req: The PIO DATA IN request that is to receive the data.
 * @data_buffer: The buffer to copy from.
 *
 * Copy the data buffer to the io request data region. enum sci_status
 */
static enum sci_status scic_sds_stp_request_pio_data_in_copy_data(
        struct scic_sds_stp_request *sci_req,
        u8 *data_buffer)
{
        enum sci_status status;

        /*
         * If there is less than 1K remaining in the transfer request
         * copy just the data for the transfer */
        if (sci_req->type.pio.pio_transfer_bytes < SCU_MAX_FRAME_BUFFER_SIZE) {
                status = scic_sds_stp_request_pio_data_in_copy_data_buffer(
                        sci_req, data_buffer, sci_req->type.pio.pio_transfer_bytes);

                if (status == SCI_SUCCESS)
                        sci_req->type.pio.pio_transfer_bytes = 0;
        } else {
                /* We are transfering the whole frame so copy */
                status = scic_sds_stp_request_pio_data_in_copy_data_buffer(
                        sci_req, data_buffer, SCU_MAX_FRAME_BUFFER_SIZE);

                if (status == SCI_SUCCESS)
                        sci_req->type.pio.pio_transfer_bytes -= SCU_MAX_FRAME_BUFFER_SIZE;
        }

        return status;
}

static enum sci_status
stp_request_pio_await_h2d_completion_tc_event(struct scic_sds_request *sci_req,
                                              u32 completion_code)
{
        enum sci_status status = SCI_SUCCESS;

        switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
                scic_sds_request_set_status(sci_req,
                                            SCU_TASK_DONE_GOOD,
                                            SCI_SUCCESS);

                sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_WAIT_FRAME);
                break;

        default:
                /* All other completion status cause the IO to be
                 * complete.  If a NAK was received, then it is up to
                 * the user to retry the request.
                 */
                scic_sds_request_set_status(sci_req,
                                            SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
                                            SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);

                sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
                break;
        }

        return status;
}

static enum sci_status
pio_data_out_tx_done_tc_event(struct scic_sds_request *sci_req,
                              u32 completion_code)
{
        enum sci_status status = SCI_SUCCESS;
        bool all_frames_transferred = false;
        struct scic_sds_stp_request *stp_req = &sci_req->stp.req;

        switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
                /* Transmit data */
                if (stp_req->type.pio.pio_transfer_bytes != 0) {
                        status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req);
                        if (status == SCI_SUCCESS) {
                                if (stp_req->type.pio.pio_transfer_bytes == 0)
                                        all_frames_transferred = true;
                        }
                } else if (stp_req->type.pio.pio_transfer_bytes == 0) {
                        /*
                         * this will happen if the all data is written at the
                         * first time after the pio setup fis is received
                         */
                        all_frames_transferred  = true;
                }

                /* all data transferred. */
                if (all_frames_transferred) {
                        /*
                         * Change the state to SCI_REQ_STP_PIO_DATA_IN
                         * and wait for PIO_SETUP fis / or D2H REg fis. */
                        sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_WAIT_FRAME);
                }
                break;

        default:
                /*
                 * All other completion status cause the IO to be complete.
                 * If a NAK was received, then it is up to the user to retry
                 * the request.
                 */
                scic_sds_request_set_status(
                        sci_req,
                        SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
                        SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);

                sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
                break;
        }

        return status;
}

static void scic_sds_stp_request_udma_complete_request(
        struct scic_sds_request *request,
        u32 scu_status,
        enum sci_status sci_status)
{
        scic_sds_request_set_status(request, scu_status, sci_status);
        sci_change_state(&request->sm, SCI_REQ_COMPLETED);
}

static enum sci_status scic_sds_stp_request_udma_general_frame_handler(struct scic_sds_request *sci_req,
                                                                       u32 frame_index)
{
        struct scic_sds_controller *scic = sci_req->owning_controller;
        struct dev_to_host_fis *frame_header;
        enum sci_status status;
        u32 *frame_buffer;

        status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control,
                                                               frame_index,
                                                               (void **)&frame_header);

        if ((status == SCI_SUCCESS) &&
            (frame_header->fis_type == FIS_REGD2H)) {
                scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control,
                                                              frame_index,
                                                              (void **)&frame_buffer);

                scic_sds_controller_copy_sata_response(&sci_req->stp.rsp,
                                                       frame_header,
                                                       frame_buffer);
        }

        scic_sds_controller_release_frame(scic, frame_index);

        return status;
}

enum sci_status
scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req,
                                  u32 frame_index)
{
        struct scic_sds_controller *scic = sci_req->owning_controller;
        struct scic_sds_stp_request *stp_req = &sci_req->stp.req;
        enum sci_base_request_states state;
        enum sci_status status;
        ssize_t word_cnt;

        state = sci_req->sm.current_state_id;
        switch (state)  {
        case SCI_REQ_STARTED: {
                struct ssp_frame_hdr ssp_hdr;
                void *frame_header;

                scic_sds_unsolicited_frame_control_get_header(&scic->uf_control,
                                                              frame_index,
                                                              &frame_header);

                word_cnt = sizeof(struct ssp_frame_hdr) / sizeof(u32);
                sci_swab32_cpy(&ssp_hdr, frame_header, word_cnt);

                if (ssp_hdr.frame_type == SSP_RESPONSE) {
                        struct ssp_response_iu *resp_iu;
                        ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32);

                        scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control,
                                                                      frame_index,
                                                                      (void **)&resp_iu);

                        sci_swab32_cpy(&sci_req->ssp.rsp, resp_iu, word_cnt);

                        resp_iu = &sci_req->ssp.rsp;

                        if (resp_iu->datapres == 0x01 ||
                            resp_iu->datapres == 0x02) {
                                scic_sds_request_set_status(sci_req,
                                                            SCU_TASK_DONE_CHECK_RESPONSE,
                                                            SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);
                        } else
                                scic_sds_request_set_status(sci_req,
                                                            SCU_TASK_DONE_GOOD,
                                                            SCI_SUCCESS);
                } else {
                        /* not a response frame, why did it get forwarded? */
                        dev_err(scic_to_dev(scic),
                                "%s: SCIC IO Request 0x%p received unexpected "
                                "frame %d type 0x%02x\n", __func__, sci_req,
                                frame_index, ssp_hdr.frame_type);
                }

                /*
                 * In any case we are done with this frame buffer return it to
                 * the controller
                 */
                scic_sds_controller_release_frame(scic, frame_index);

                return SCI_SUCCESS;
        }

        case SCI_REQ_TASK_WAIT_TC_RESP:
                scic_sds_io_request_copy_response(sci_req);
                sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
                scic_sds_controller_release_frame(scic,frame_index);
                return SCI_SUCCESS;

        case SCI_REQ_SMP_WAIT_RESP: {
                struct smp_resp *rsp_hdr = &sci_req->smp.rsp;
                void *frame_header;

                scic_sds_unsolicited_frame_control_get_header(&scic->uf_control,
                                                              frame_index,
                                                              &frame_header);

                /* byte swap the header. */
                word_cnt = SMP_RESP_HDR_SZ / sizeof(u32);
                sci_swab32_cpy(rsp_hdr, frame_header, word_cnt);

                if (rsp_hdr->frame_type == SMP_RESPONSE) {
                        void *smp_resp;

                        scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control,
                                                                      frame_index,
                                                                      &smp_resp);

                        word_cnt = (sizeof(struct smp_resp) - SMP_RESP_HDR_SZ) /
                                sizeof(u32);

                        sci_swab32_cpy(((u8 *) rsp_hdr) + SMP_RESP_HDR_SZ,
                                       smp_resp, word_cnt);

                        scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD,
                                                    SCI_SUCCESS);

                        sci_change_state(&sci_req->sm, SCI_REQ_SMP_WAIT_TC_COMP);
                } else {
                        /*
                         * This was not a response frame why did it get
                         * forwarded?
                         */
                        dev_err(scic_to_dev(scic),
                                "%s: SCIC SMP Request 0x%p received unexpected "
                                "frame %d type 0x%02x\n",
                                __func__,
                                sci_req,
                                frame_index,
                                rsp_hdr->frame_type);

                        scic_sds_request_set_status(sci_req,
                                                    SCU_TASK_DONE_SMP_FRM_TYPE_ERR,
                                                    SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);

                        sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
                }

                scic_sds_controller_release_frame(scic, frame_index);

                return SCI_SUCCESS;
        }

        case SCI_REQ_STP_UDMA_WAIT_TC_COMP:
                return scic_sds_stp_request_udma_general_frame_handler(sci_req,
                                                                       frame_index);

        case SCI_REQ_STP_UDMA_WAIT_D2H:
                /* Use the general frame handler to copy the resposne data */
                status = scic_sds_stp_request_udma_general_frame_handler(sci_req,
                                                                         frame_index);

                if (status != SCI_SUCCESS)
                        return status;

                scic_sds_stp_request_udma_complete_request(sci_req,
                                                           SCU_TASK_DONE_CHECK_RESPONSE,
                                                           SCI_FAILURE_IO_RESPONSE_VALID);

                return SCI_SUCCESS;

        case SCI_REQ_STP_NON_DATA_WAIT_D2H: {
                struct dev_to_host_fis *frame_header;
                u32 *frame_buffer;

                status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control,
                                                                       frame_index,
                                                                       (void **)&frame_header);

                if (status != SCI_SUCCESS) {
                        dev_err(scic_to_dev(scic),
                                "%s: SCIC IO Request 0x%p could not get frame "
                                "header for frame index %d, status %x\n",
                                __func__,
                                stp_req,
                                frame_index,
                                status);

                        return status;
                }

                switch (frame_header->fis_type) {
                case FIS_REGD2H:
                        scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control,
                                                                      frame_index,
                                                                      (void **)&frame_buffer);

                        scic_sds_controller_copy_sata_response(&sci_req->stp.rsp,
                                                               frame_header,
                                                               frame_buffer);

                        /* The command has completed with error */
                        scic_sds_request_set_status(sci_req, SCU_TASK_DONE_CHECK_RESPONSE,
                                                    SCI_FAILURE_IO_RESPONSE_VALID);
                        break;

                default:
                        dev_warn(scic_to_dev(scic),
                                 "%s: IO Request:0x%p Frame Id:%d protocol "
                                  "violation occurred\n", __func__, stp_req,
                                  frame_index);

                        scic_sds_request_set_status(sci_req, SCU_TASK_DONE_UNEXP_FIS,
                                                    SCI_FAILURE_PROTOCOL_VIOLATION);
                        break;
                }

                sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);

                /* Frame has been decoded return it to the controller */
                scic_sds_controller_release_frame(scic, frame_index);

                return status;
        }

        case SCI_REQ_STP_PIO_WAIT_FRAME: {
                struct isci_request *ireq = sci_req_to_ireq(sci_req);
                struct sas_task *task = isci_request_access_task(ireq);
                struct dev_to_host_fis *frame_header;
                u32 *frame_buffer;

                status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control,
                                                                       frame_index,
                                                                       (void **)&frame_header);

                if (status != SCI_SUCCESS) {
                        dev_err(scic_to_dev(scic),
                                "%s: SCIC IO Request 0x%p could not get frame "
                                "header for frame index %d, status %x\n",
                                __func__, stp_req, frame_index, status);
                        return status;
                }

                switch (frame_header->fis_type) {
                case FIS_PIO_SETUP:
                        /* Get from the frame buffer the PIO Setup Data */
                        scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control,
                                                                      frame_index,
                                                                      (void **)&frame_buffer);

                        /* Get the data from the PIO Setup The SCU Hardware
                         * returns first word in the frame_header and the rest
                         * of the data is in the frame buffer so we need to
                         * back up one dword
                         */

                        /* transfer_count: first 16bits in the 4th dword */
                        stp_req->type.pio.pio_transfer_bytes = frame_buffer[3] & 0xffff;

                        /* ending_status: 4th byte in the 3rd dword */
                        stp_req->type.pio.ending_status = (frame_buffer[2] >> 24) & 0xff;

                        scic_sds_controller_copy_sata_response(&sci_req->stp.rsp,
                                                               frame_header,
                                                               frame_buffer);

                        sci_req->stp.rsp.status = stp_req->type.pio.ending_status;

                        /* The next state is dependent on whether the
                         * request was PIO Data-in or Data out
                         */
                        if (task->data_dir == DMA_FROM_DEVICE) {
                                sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_DATA_IN);
                        } else if (task->data_dir == DMA_TO_DEVICE) {
                                /* Transmit data */
                                status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req);
                                if (status != SCI_SUCCESS)
                                        break;
                                sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_DATA_OUT);
                        }
                        break;

                case FIS_SETDEVBITS:
                        sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_WAIT_FRAME);
                        break;

                case FIS_REGD2H:
                        if (frame_header->status & ATA_BUSY) {
                                /*
                                 * Now why is the drive sending a D2H Register
                                 * FIS when it is still busy?  Do nothing since
                                 * we are still in the right state.
                                 */
                                dev_dbg(scic_to_dev(scic),
                                        "%s: SCIC PIO Request 0x%p received "
                                        "D2H Register FIS with BSY status "
                                        "0x%x\n",
                                        __func__,
                                        stp_req,
                                        frame_header->status);
                                break;
                        }

                        scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control,
                                                                      frame_index,
                                                                      (void **)&frame_buffer);

                        scic_sds_controller_copy_sata_response(&sci_req->stp.req,
                                                               frame_header,
                                                               frame_buffer);

                        scic_sds_request_set_status(sci_req,
                                                    SCU_TASK_DONE_CHECK_RESPONSE,
                                                    SCI_FAILURE_IO_RESPONSE_VALID);

                        sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
                        break;

                default:
                        /* FIXME: what do we do here? */
                        break;
                }

                /* Frame is decoded return it to the controller */
                scic_sds_controller_release_frame(scic, frame_index);

                return status;
        }

        case SCI_REQ_STP_PIO_DATA_IN: {
                struct dev_to_host_fis *frame_header;
                struct sata_fis_data *frame_buffer;

                status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control,
                                                                       frame_index,
                                                                       (void **)&frame_header);

                if (status != SCI_SUCCESS) {
                        dev_err(scic_to_dev(scic),
                                "%s: SCIC IO Request 0x%p could not get frame "
                                "header for frame index %d, status %x\n",
                                __func__,
                                stp_req,
                                frame_index,
                                status);
                        return status;
                }

                if (frame_header->fis_type != FIS_DATA) {
                        dev_err(scic_to_dev(scic),
                                "%s: SCIC PIO Request 0x%p received frame %d "
                                "with fis type 0x%02x when expecting a data "
                                "fis.\n",
                                __func__,
                                stp_req,
                                frame_index,
                                frame_header->fis_type);

                        scic_sds_request_set_status(sci_req,
                                                    SCU_TASK_DONE_GOOD,
                                                    SCI_FAILURE_IO_REQUIRES_SCSI_ABORT);

                        sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);

                        /* Frame is decoded return it to the controller */
                        scic_sds_controller_release_frame(scic, frame_index);
                        return status;
                }

                if (stp_req->type.pio.request_current.sgl_pair == NULL) {
                        sci_req->saved_rx_frame_index = frame_index;
                        stp_req->type.pio.pio_transfer_bytes = 0;
                } else {
                        scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control,
                                                                      frame_index,
                                                                      (void **)&frame_buffer);

                        status = scic_sds_stp_request_pio_data_in_copy_data(stp_req,
                                                                            (u8 *)frame_buffer);

                        /* Frame is decoded return it to the controller */
                        scic_sds_controller_release_frame(scic, frame_index);
                }

                /* Check for the end of the transfer, are there more
                 * bytes remaining for this data transfer
                 */
                if (status != SCI_SUCCESS ||
                    stp_req->type.pio.pio_transfer_bytes != 0)
                        return status;

                if ((stp_req->type.pio.ending_status & ATA_BUSY) == 0) {
                        scic_sds_request_set_status(sci_req,
                                                    SCU_TASK_DONE_CHECK_RESPONSE,
                                                    SCI_FAILURE_IO_RESPONSE_VALID);

                        sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
                } else {
                        sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_WAIT_FRAME);
                }
                return status;
        }

        case SCI_REQ_STP_SOFT_RESET_WAIT_D2H: {
                struct dev_to_host_fis *frame_header;
                u32 *frame_buffer;

                status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control,
                                                                       frame_index,
                                                                       (void **)&frame_header);
                if (status != SCI_SUCCESS) {
                        dev_err(scic_to_dev(scic),
                                "%s: SCIC IO Request 0x%p could not get frame "
                                "header for frame index %d, status %x\n",
                                __func__,
                                stp_req,
                                frame_index,
                                status);
                        return status;
                }

                switch (frame_header->fis_type) {
                case FIS_REGD2H:
                        scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control,
                                                                      frame_index,
                                                                      (void **)&frame_buffer);

                        scic_sds_controller_copy_sata_response(&sci_req->stp.rsp,
                                                               frame_header,
                                                               frame_buffer);

                        /* The command has completed with error */
                        scic_sds_request_set_status(sci_req,
                                                    SCU_TASK_DONE_CHECK_RESPONSE,
                                                    SCI_FAILURE_IO_RESPONSE_VALID);
                        break;

                default:
                        dev_warn(scic_to_dev(scic),
                                 "%s: IO Request:0x%p Frame Id:%d protocol "
                                 "violation occurred\n",
                                 __func__,
                                 stp_req,
                                 frame_index);

                        scic_sds_request_set_status(sci_req,
                                                    SCU_TASK_DONE_UNEXP_FIS,
                                                    SCI_FAILURE_PROTOCOL_VIOLATION);
                        break;
                }

                sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);

                /* Frame has been decoded return it to the controller */
                scic_sds_controller_release_frame(scic, frame_index);

                return status;
        }
        case SCI_REQ_ABORTING:
                /*
                 * TODO: Is it even possible to get an unsolicited frame in the
                 * aborting state?
                 */
                scic_sds_controller_release_frame(scic, frame_index);
                return SCI_SUCCESS;

        default:
                dev_warn(scic_to_dev(scic),
                         "%s: SCIC IO Request given unexpected frame %x while "
                         "in state %d\n",
                         __func__,
                         frame_index,
                         state);

                scic_sds_controller_release_frame(scic, frame_index);
                return SCI_FAILURE_INVALID_STATE;
        }
}

static enum sci_status stp_request_udma_await_tc_event(struct scic_sds_request *sci_req,
                                                       u32 completion_code)
{
        enum sci_status status = SCI_SUCCESS;

        switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
                scic_sds_stp_request_udma_complete_request(sci_req,
                                                           SCU_TASK_DONE_GOOD,
                                                           SCI_SUCCESS);
                break;
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_FIS):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR):
                /* We must check ther response buffer to see if the D2H
                 * Register FIS was received before we got the TC
                 * completion.
                 */
                if (sci_req->stp.rsp.fis_type == FIS_REGD2H) {
                        scic_sds_remote_device_suspend(sci_req->target_device,
                                SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code)));

                        scic_sds_stp_request_udma_complete_request(sci_req,
                                                                   SCU_TASK_DONE_CHECK_RESPONSE,
                                                                   SCI_FAILURE_IO_RESPONSE_VALID);
                } else {
                        /* If we have an error completion status for the
                         * TC then we can expect a D2H register FIS from
                         * the device so we must change state to wait
                         * for it
                         */
                        sci_change_state(&sci_req->sm, SCI_REQ_STP_UDMA_WAIT_D2H);
                }
                break;

        /* TODO Check to see if any of these completion status need to
         * wait for the device to host register fis.
         */
        /* TODO We can retry the command for SCU_TASK_DONE_CMD_LL_R_ERR
         * - this comes only for B0
         */
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_INV_FIS_LEN):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_R_ERR):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CMD_LL_R_ERR):
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CRC_ERR):
                scic_sds_remote_device_suspend(sci_req->target_device,
                        SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code)));
        /* Fall through to the default case */
        default:
                /* All other completion status cause the IO to be complete. */
                scic_sds_stp_request_udma_complete_request(sci_req,
                                        SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
                                        SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);
                break;
        }

        return status;
}

static enum sci_status
stp_request_soft_reset_await_h2d_asserted_tc_event(struct scic_sds_request *sci_req,
                                                   u32 completion_code)
{
        switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
                scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD,
                                            SCI_SUCCESS);

                sci_change_state(&sci_req->sm, SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG);
                break;

        default:
                /*
                 * All other completion status cause the IO to be complete.
                 * If a NAK was received, then it is up to the user to retry
                 * the request.
                 */
                scic_sds_request_set_status(sci_req,
                                            SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
                                            SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);

                sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
                break;
        }

        return SCI_SUCCESS;
}

static enum sci_status
stp_request_soft_reset_await_h2d_diagnostic_tc_event(struct scic_sds_request *sci_req,
                                                     u32 completion_code)
{
        switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
        case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
                scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD,
                                            SCI_SUCCESS);

                sci_change_state(&sci_req->sm, SCI_REQ_STP_SOFT_RESET_WAIT_D2H);
                break;

        default:
                /* All other completion status cause the IO to be complete.  If
                 * a NAK was received, then it is up to the user to retry the
                 * request.
                 */
                scic_sds_request_set_status(sci_req,
                        SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
                        SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);

                sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
                break;
        }

        return SCI_SUCCESS;
}

enum sci_status
scic_sds_io_request_tc_completion(struct scic_sds_request *sci_req,
                                  u32 completion_code)
{
        enum sci_base_request_states state;
        struct scic_sds_controller *scic = sci_req->owning_controller;

        state = sci_req->sm.current_state_id;

        switch (state) {
        case SCI_REQ_STARTED:
                return request_started_state_tc_event(sci_req, completion_code);

        case SCI_REQ_TASK_WAIT_TC_COMP:
                return ssp_task_request_await_tc_event(sci_req,
                                                       completion_code);

        case SCI_REQ_SMP_WAIT_RESP:
                return smp_request_await_response_tc_event(sci_req,
                                                           completion_code);

        case SCI_REQ_SMP_WAIT_TC_COMP:
                return smp_request_await_tc_event(sci_req, completion_code);

        case SCI_REQ_STP_UDMA_WAIT_TC_COMP:
                return stp_request_udma_await_tc_event(sci_req,
                                                       completion_code);

        case SCI_REQ_STP_NON_DATA_WAIT_H2D:
                return stp_request_non_data_await_h2d_tc_event(sci_req,
                                                               completion_code);

        case SCI_REQ_STP_PIO_WAIT_H2D:
                return stp_request_pio_await_h2d_completion_tc_event(sci_req,
                                                                     completion_code);

        case SCI_REQ_STP_PIO_DATA_OUT:
                return pio_data_out_tx_done_tc_event(sci_req, completion_code);

        case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED:
                return stp_request_soft_reset_await_h2d_asserted_tc_event(sci_req,
                                                                          completion_code);

        case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG:
                return stp_request_soft_reset_await_h2d_diagnostic_tc_event(sci_req,
                                                                            completion_code);

        case SCI_REQ_ABORTING:
                return request_aborting_state_tc_event(sci_req,
                                                       completion_code);

        default:
                dev_warn(scic_to_dev(scic),
                         "%s: SCIC IO Request given task completion "
                         "notification %x while in wrong state %d\n",
                         __func__,
                         completion_code,
                         state);
                return SCI_FAILURE_INVALID_STATE;
        }
}

/**
 * isci_request_process_response_iu() - This function sets the status and
 *    response iu, in the task struct, from the request object for the upper
 *    layer driver.
 * @sas_task: This parameter is the task struct from the upper layer driver.
 * @resp_iu: This parameter points to the response iu of the completed request.
 * @dev: This parameter specifies the linux device struct.
 *
 * none.
 */
static void isci_request_process_response_iu(
        struct sas_task *task,
        struct ssp_response_iu *resp_iu,
        struct device *dev)
{
        dev_dbg(dev,
                "%s: resp_iu = %p "
                "resp_iu->status = 0x%x,\nresp_iu->datapres = %d "
                "resp_iu->response_data_len = %x, "
                "resp_iu->sense_data_len = %x\nrepsonse data: ",
                __func__,
                resp_iu,
                resp_iu->status,
                resp_iu->datapres,
                resp_iu->response_data_len,
                resp_iu->sense_data_len);

        task->task_status.stat = resp_iu->status;

        /* libsas updates the task status fields based on the response iu. */
        sas_ssp_task_response(dev, task, resp_iu);
}

/**
 * isci_request_set_open_reject_status() - This function prepares the I/O
 *    completion for OPEN_REJECT conditions.
 * @request: This parameter is the completed isci_request object.
 * @response_ptr: This parameter specifies the service response for the I/O.
 * @status_ptr: This parameter specifies the exec status for the I/O.
 * @complete_to_host_ptr: This parameter specifies the action to be taken by
 *    the LLDD with respect to completing this request or forcing an abort
 *    condition on the I/O.
 * @open_rej_reason: This parameter specifies the encoded reason for the
 *    abandon-class reject.
 *
 * none.
 */
static void isci_request_set_open_reject_status(
        struct isci_request *request,
        struct sas_task *task,
        enum service_response *response_ptr,
        enum exec_status *status_ptr,
        enum isci_completion_selection *complete_to_host_ptr,
        enum sas_open_rej_reason open_rej_reason)
{
        /* Task in the target is done. */
        request->complete_in_target       = true;
        *response_ptr                     = SAS_TASK_UNDELIVERED;
        *status_ptr                       = SAS_OPEN_REJECT;
        *complete_to_host_ptr             = isci_perform_normal_io_completion;
        task->task_status.open_rej_reason = open_rej_reason;
}

/**
 * isci_request_handle_controller_specific_errors() - This function decodes
 *    controller-specific I/O completion error conditions.
 * @request: This parameter is the completed isci_request object.
 * @response_ptr: This parameter specifies the service response for the I/O.
 * @status_ptr: This parameter specifies the exec status for the I/O.
 * @complete_to_host_ptr: This parameter specifies the action to be taken by
 *    the LLDD with respect to completing this request or forcing an abort
 *    condition on the I/O.
 *
 * none.
 */
static void isci_request_handle_controller_specific_errors(
        struct isci_remote_device *idev,
        struct isci_request *request,
        struct sas_task *task,
        enum service_response *response_ptr,
        enum exec_status *status_ptr,
        enum isci_completion_selection *complete_to_host_ptr)
{
        unsigned int cstatus;

        cstatus = request->sci.scu_status;

        dev_dbg(&request->isci_host->pdev->dev,
                "%s: %p SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR "
                "- controller status = 0x%x\n",
                __func__, request, cstatus);

        /* Decode the controller-specific errors; most
         * important is to recognize those conditions in which
         * the target may still have a task outstanding that
         * must be aborted.
         *
         * Note that there are SCU completion codes being
         * named in the decode below for which SCIC has already
         * done work to handle them in a way other than as
         * a controller-specific completion code; these are left
         * in the decode below for completeness sake.
         */
        switch (cstatus) {
        case SCU_TASK_DONE_DMASETUP_DIRERR:
        /* Also SCU_TASK_DONE_SMP_FRM_TYPE_ERR: */
        case SCU_TASK_DONE_XFERCNT_ERR:
                /* Also SCU_TASK_DONE_SMP_UFI_ERR: */
                if (task->task_proto == SAS_PROTOCOL_SMP) {
                        /* SCU_TASK_DONE_SMP_UFI_ERR == Task Done. */
                        *response_ptr = SAS_TASK_COMPLETE;

                        /* See if the device has been/is being stopped. Note
                         * that we ignore the quiesce state, since we are
                         * concerned about the actual device state.
                         */
                        if (!idev)
                                *status_ptr = SAS_DEVICE_UNKNOWN;
                        else
                                *status_ptr = SAS_ABORTED_TASK;

                        request->complete_in_target = true;

                        *complete_to_host_ptr =
                                isci_perform_normal_io_completion;
                } else {
                        /* Task in the target is not done. */
                        *response_ptr = SAS_TASK_UNDELIVERED;

                        if (!idev)
                                *status_ptr = SAS_DEVICE_UNKNOWN;
                        else
                                *status_ptr = SAM_STAT_TASK_ABORTED;

                        request->complete_in_target = false;

                        *complete_to_host_ptr =
                                isci_perform_error_io_completion;
                }

                break;

        case SCU_TASK_DONE_CRC_ERR:
        case SCU_TASK_DONE_NAK_CMD_ERR:
        case SCU_TASK_DONE_EXCESS_DATA:
        case SCU_TASK_DONE_UNEXP_FIS:
        /* Also SCU_TASK_DONE_UNEXP_RESP: */
        case SCU_TASK_DONE_VIIT_ENTRY_NV:       /* TODO - conditions? */
        case SCU_TASK_DONE_IIT_ENTRY_NV:        /* TODO - conditions? */
        case SCU_TASK_DONE_RNCNV_OUTBOUND:      /* TODO - conditions? */
                /* These are conditions in which the target
                 * has completed the task, so that no cleanup
                 * is necessary.
                 */
                *response_ptr = SAS_TASK_COMPLETE;

                /* See if the device has been/is being stopped. Note
                 * that we ignore the quiesce state, since we are
                 * concerned about the actual device state.
                 */
                if (!idev)
                        *status_ptr = SAS_DEVICE_UNKNOWN;
                else
                        *status_ptr = SAS_ABORTED_TASK;

                request->complete_in_target = true;

                *complete_to_host_ptr = isci_perform_normal_io_completion;
                break;


        /* Note that the only open reject completion codes seen here will be
         * abandon-class codes; all others are automatically retried in the SCU.
         */
        case SCU_TASK_OPEN_REJECT_WRONG_DESTINATION:

                isci_request_set_open_reject_status(
                        request, task, response_ptr, status_ptr,
                        complete_to_host_ptr, SAS_OREJ_WRONG_DEST);
                break;

        case SCU_TASK_OPEN_REJECT_ZONE_VIOLATION:

                /* Note - the return of AB0 will change when
                 * libsas implements detection of zone violations.
                 */
                isci_request_set_open_reject_status(
                        request, task, response_ptr, status_ptr,
                        complete_to_host_ptr, SAS_OREJ_RESV_AB0);
                break;

        case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1:

                isci_request_set_open_reject_status(
                        request, task, response_ptr, status_ptr,
                        complete_to_host_ptr, SAS_OREJ_RESV_AB1);
                break;

        case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2:

                isci_request_set_open_reject_status(
                        request, task, response_ptr, status_ptr,
                        complete_to_host_ptr, SAS_OREJ_RESV_AB2);
                break;

        case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3:

                isci_request_set_open_reject_status(
                        request, task, response_ptr, status_ptr,
                        complete_to_host_ptr, SAS_OREJ_RESV_AB3);
                break;

        case SCU_TASK_OPEN_REJECT_BAD_DESTINATION:

                isci_request_set_open_reject_status(
                        request, task, response_ptr, status_ptr,
                        complete_to_host_ptr, SAS_OREJ_BAD_DEST);
                break;

        case SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY:

                isci_request_set_open_reject_status(
                        request, task, response_ptr, status_ptr,
                        complete_to_host_ptr, SAS_OREJ_STP_NORES);
                break;

        case SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED:

                isci_request_set_open_reject_status(
                        request, task, response_ptr, status_ptr,
                        complete_to_host_ptr, SAS_OREJ_EPROTO);
                break;

        case SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED:

                isci_request_set_open_reject_status(
                        request, task, response_ptr, status_ptr,
                        complete_to_host_ptr, SAS_OREJ_CONN_RATE);
                break;

        case SCU_TASK_DONE_LL_R_ERR:
        /* Also SCU_TASK_DONE_ACK_NAK_TO: */
        case SCU_TASK_DONE_LL_PERR:
        case SCU_TASK_DONE_LL_SY_TERM:
        /* Also SCU_TASK_DONE_NAK_ERR:*/
        case SCU_TASK_DONE_LL_LF_TERM:
        /* Also SCU_TASK_DONE_DATA_LEN_ERR: */
        case SCU_TASK_DONE_LL_ABORT_ERR:
        case SCU_TASK_DONE_SEQ_INV_TYPE:
        /* Also SCU_TASK_DONE_UNEXP_XR: */
        case SCU_TASK_DONE_XR_IU_LEN_ERR:
        case SCU_TASK_DONE_INV_FIS_LEN:
        /* Also SCU_TASK_DONE_XR_WD_LEN: */
        case SCU_TASK_DONE_SDMA_ERR:
        case SCU_TASK_DONE_OFFSET_ERR:
        case SCU_TASK_DONE_MAX_PLD_ERR:
        case SCU_TASK_DONE_LF_ERR:
        case SCU_TASK_DONE_SMP_RESP_TO_ERR:  /* Escalate to dev reset? */
        case SCU_TASK_DONE_SMP_LL_RX_ERR:
        case SCU_TASK_DONE_UNEXP_DATA:
        case SCU_TASK_DONE_UNEXP_SDBFIS:
        case SCU_TASK_DONE_REG_ERR:
        case SCU_TASK_DONE_SDB_ERR:
        case SCU_TASK_DONE_TASK_ABORT:
        default:
                /* Task in the target is not done. */
                *response_ptr = SAS_TASK_UNDELIVERED;
                *status_ptr = SAM_STAT_TASK_ABORTED;

                if (task->task_proto == SAS_PROTOCOL_SMP) {
                        request->complete_in_target = true;

                        *complete_to_host_ptr = isci_perform_normal_io_completion;
                } else {
                        request->complete_in_target = false;

                        *complete_to_host_ptr = isci_perform_error_io_completion;
                }
                break;
        }
}

/**
 * isci_task_save_for_upper_layer_completion() - This function saves the
 *    request for later completion to the upper layer driver.
 * @host: This parameter is a pointer to the host on which the the request
 *    should be queued (either as an error or success).
 * @request: This parameter is the completed request.
 * @response: This parameter is the response code for the completed task.
 * @status: This parameter is the status code for the completed task.
 *
 * none.
 */
static void isci_task_save_for_upper_layer_completion(
        struct isci_host *host,
        struct isci_request *request,
        enum service_response response,
        enum exec_status status,
        enum isci_completion_selection task_notification_selection)
{
        struct sas_task *task = isci_request_access_task(request);

        task_notification_selection
                = isci_task_set_completion_status(task, response, status,
                                                  task_notification_selection);

        /* Tasks aborted specifically by a call to the lldd_abort_task
         * function should not be completed to the host in the regular path.
         */
        switch (task_notification_selection) {

        case isci_perform_normal_io_completion:

                /* Normal notification (task_done) */
                dev_dbg(&host->pdev->dev,
                        "%s: Normal - task = %p, response=%d (%d), status=%d (%d)\n",
                        __func__,
                        task,
                        task->task_status.resp, response,
                        task->task_status.stat, status);
                /* Add to the completed list. */
                list_add(&request->completed_node,
                         &host->requests_to_complete);

                /* Take the request off the device's pending request list. */
                list_del_init(&request->dev_node);
                break;

        case isci_perform_aborted_io_completion:
                /* No notification to libsas because this request is
                 * already in the abort path.
                 */
                dev_warn(&host->pdev->dev,
                         "%s: Aborted - task = %p, response=%d (%d), status=%d (%d)\n",
                         __func__,
                         task,
                         task->task_status.resp, response,
                         task->task_status.stat, status);

                /* Wake up whatever process was waiting for this
                 * request to complete.
                 */
                WARN_ON(request->io_request_completion == NULL);

                if (request->io_request_completion != NULL) {

                        /* Signal whoever is waiting that this
                        * request is complete.
                        */
                        complete(request->io_request_completion);
                }
                break;

        case isci_perform_error_io_completion:
                /* Use sas_task_abort */
                dev_warn(&host->pdev->dev,
                         "%s: Error - task = %p, response=%d (%d), status=%d (%d)\n",
                         __func__,
                         task,
                         task->task_status.resp, response,
                         task->task_status.stat, status);
                /* Add to the aborted list. */
                list_add(&request->completed_node,
                         &host->requests_to_errorback);
                break;

        default:
                dev_warn(&host->pdev->dev,
                         "%s: Unknown - task = %p, response=%d (%d), status=%d (%d)\n",
                         __func__,
                         task,
                         task->task_status.resp, response,
                         task->task_status.stat, status);

                /* Add to the error to libsas list. */
                list_add(&request->completed_node,
                         &host->requests_to_errorback);
                break;
        }
}

static void isci_request_io_request_complete(struct isci_host *isci_host,
                                             struct isci_request *request,
                                             enum sci_io_status completion_status)
{
        struct sas_task *task = isci_request_access_task(request);
        struct ssp_response_iu *resp_iu;
        void *resp_buf;
        unsigned long task_flags;
        struct isci_remote_device *idev = isci_lookup_device(task->dev);
        enum service_response response       = SAS_TASK_UNDELIVERED;
        enum exec_status status         = SAS_ABORTED_TASK;
        enum isci_request_status request_status;
        enum isci_completion_selection complete_to_host
                = isci_perform_normal_io_completion;

        dev_dbg(&isci_host->pdev->dev,
                "%s: request = %p, task = %p,\n"
                "task->data_dir = %d completion_status = 0x%x\n",
                __func__,
                request,
                task,
                task->data_dir,
                completion_status);

        spin_lock(&request->state_lock);
        request_status = isci_request_get_state(request);

        /* Decode the request status.  Note that if the request has been
         * aborted by a task management function, we don't care
         * what the status is.
         */
        switch (request_status) {

        case aborted:
                /* "aborted" indicates that the request was aborted by a task
                 * management function, since once a task management request is
                 * perfomed by the device, the request only completes because
                 * of the subsequent driver terminate.
                 *
                 * Aborted also means an external thread is explicitly managing
                 * this request, so that we do not complete it up the stack.
                 *
                 * The target is still there (since the TMF was successful).
                 */
                request->complete_in_target = true;
                response = SAS_TASK_COMPLETE;

                /* See if the device has been/is being stopped. Note
                 * that we ignore the quiesce state, since we are
                 * concerned about the actual device state.
                 */
                if (!idev)
                        status = SAS_DEVICE_UNKNOWN;
                else
                        status = SAS_ABORTED_TASK;

                complete_to_host = isci_perform_aborted_io_completion;
                /* This was an aborted request. */

                spin_unlock(&request->state_lock);
                break;

        case aborting:
                /* aborting means that the task management function tried and
                 * failed to abort the request. We need to note the request
                 * as SAS_TASK_UNDELIVERED, so that the scsi mid layer marks the
                 * target as down.
                 *
                 * Aborting also means an external thread is explicitly managing
                 * this request, so that we do not complete it up the stack.
                 */
                request->complete_in_target = true;
                response = SAS_TASK_UNDELIVERED;

                if (!idev)
                        /* The device has been /is being stopped. Note that
                         * we ignore the quiesce state, since we are
                         * concerned about the actual device state.
                         */
                        status = SAS_DEVICE_UNKNOWN;
                else
                        status = SAS_PHY_DOWN;

                complete_to_host = isci_perform_aborted_io_completion;

                /* This was an aborted request. */

                spin_unlock(&request->state_lock);
                break;

        case terminating:

                /* This was an terminated request.  This happens when
                 * the I/O is being terminated because of an action on
                 * the device (reset, tear down, etc.), and the I/O needs
                 * to be completed up the stack.
                 */
                request->complete_in_target = true;
                response = SAS_TASK_UNDELIVERED;

                /* See if the device has been/is being stopped. Note
                 * that we ignore the quiesce state, since we are
                 * concerned about the actual device state.
                 */
                if (!idev)
                        status = SAS_DEVICE_UNKNOWN;
                else
                        status = SAS_ABORTED_TASK;

                complete_to_host = isci_perform_aborted_io_completion;

                /* This was a terminated request. */

                spin_unlock(&request->state_lock);
                break;

        case dead:
                /* This was a terminated request that timed-out during the
                 * termination process.  There is no task to complete to
                 * libsas.
                 */
                complete_to_host = isci_perform_normal_io_completion;
                spin_unlock(&request->state_lock);
                break;

        default:

                /* The request is done from an SCU HW perspective. */
                request->status = completed;

                spin_unlock(&request->state_lock);

                /* This is an active request being completed from the core. */
                switch (completion_status) {

                case SCI_IO_FAILURE_RESPONSE_VALID:
                        dev_dbg(&isci_host->pdev->dev,
                                "%s: SCI_IO_FAILURE_RESPONSE_VALID (%p/%p)\n",
                                __func__,
                                request,
                                task);

                        if (sas_protocol_ata(task->task_proto)) {
                                resp_buf = &request->sci.stp.rsp;
                                isci_request_process_stp_response(task,
                                                                  resp_buf);
                        } else if (SAS_PROTOCOL_SSP == task->task_proto) {

                                /* crack the iu response buffer. */
                                resp_iu = &request->sci.ssp.rsp;
                                isci_request_process_response_iu(task, resp_iu,
                                                                 &isci_host->pdev->dev);

                        } else if (SAS_PROTOCOL_SMP == task->task_proto) {

                                dev_err(&isci_host->pdev->dev,
                                        "%s: SCI_IO_FAILURE_RESPONSE_VALID: "
                                        "SAS_PROTOCOL_SMP protocol\n",
                                        __func__);

                        } else
                                dev_err(&isci_host->pdev->dev,
                                        "%s: unknown protocol\n", __func__);

                        /* use the task status set in the task struct by the
                         * isci_request_process_response_iu call.
                         */
                        request->complete_in_target = true;
                        response = task->task_status.resp;
                        status = task->task_status.stat;
                        break;

                case SCI_IO_SUCCESS:
                case SCI_IO_SUCCESS_IO_DONE_EARLY:

                        response = SAS_TASK_COMPLETE;
                        status   = SAM_STAT_GOOD;
                        request->complete_in_target = true;

                        if (task->task_proto == SAS_PROTOCOL_SMP) {
                                void *rsp = &request->sci.smp.rsp;

                                dev_dbg(&isci_host->pdev->dev,
                                        "%s: SMP protocol completion\n",
                                        __func__);

                                sg_copy_from_buffer(
                                        &task->smp_task.smp_resp, 1,
                                        rsp, sizeof(struct smp_resp));
                        } else if (completion_status
                                   == SCI_IO_SUCCESS_IO_DONE_EARLY) {

                                /* This was an SSP / STP / SATA transfer.
                                 * There is a possibility that less data than
                                 * the maximum was transferred.
                                 */
                                u32 transferred_length = sci_req_tx_bytes(&request->sci);

                                task->task_status.residual
                                        = task->total_xfer_len - transferred_length;

                                /* If there were residual bytes, call this an
                                 * underrun.
                                 */
                                if (task->task_status.residual != 0)
                                        status = SAS_DATA_UNDERRUN;

                                dev_dbg(&isci_host->pdev->dev,
                                        "%s: SCI_IO_SUCCESS_IO_DONE_EARLY %d\n",
                                        __func__,
                                        status);

                        } else
                                dev_dbg(&isci_host->pdev->dev,
                                        "%s: SCI_IO_SUCCESS\n",
                                        __func__);

                        break;

                case SCI_IO_FAILURE_TERMINATED:
                        dev_dbg(&isci_host->pdev->dev,
                                "%s: SCI_IO_FAILURE_TERMINATED (%p/%p)\n",
                                __func__,
                                request,
                                task);

                        /* The request was terminated explicitly.  No handling
                         * is needed in the SCSI error handler path.
                         */
                        request->complete_in_target = true;
                        response = SAS_TASK_UNDELIVERED;

                        /* See if the device has been/is being stopped. Note
                         * that we ignore the quiesce state, since we are
                         * concerned about the actual device state.
                         */
                        if (!idev)
                                status = SAS_DEVICE_UNKNOWN;
                        else
                                status = SAS_ABORTED_TASK;

                        complete_to_host = isci_perform_normal_io_completion;
                        break;

                case SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR:

                        isci_request_handle_controller_specific_errors(
                                idev, request, task, &response, &status,
                                &complete_to_host);

                        break;

                case SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED:
                        /* This is a special case, in that the I/O completion
                         * is telling us that the device needs a reset.
                         * In order for the device reset condition to be
                         * noticed, the I/O has to be handled in the error
                         * handler.  Set the reset flag and cause the
                         * SCSI error thread to be scheduled.
                         */
                        spin_lock_irqsave(&task->task_state_lock, task_flags);
                        task->task_state_flags |= SAS_TASK_NEED_DEV_RESET;
                        spin_unlock_irqrestore(&task->task_state_lock, task_flags);

                        /* Fail the I/O. */
                        response = SAS_TASK_UNDELIVERED;
                        status = SAM_STAT_TASK_ABORTED;

                        complete_to_host = isci_perform_error_io_completion;
                        request->complete_in_target = false;
                        break;

                case SCI_FAILURE_RETRY_REQUIRED:

                        /* Fail the I/O so it can be retried. */
                        response = SAS_TASK_UNDELIVERED;
                        if (!idev)
                                status = SAS_DEVICE_UNKNOWN;
                        else
                                status = SAS_ABORTED_TASK;

                        complete_to_host = isci_perform_normal_io_completion;
                        request->complete_in_target = true;
                        break;


                default:
                        /* Catch any otherwise unhandled error codes here. */
                        dev_warn(&isci_host->pdev->dev,
                                 "%s: invalid completion code: 0x%x - "
                                 "isci_request = %p\n",
                                 __func__, completion_status, request);

                        response = SAS_TASK_UNDELIVERED;

                        /* See if the device has been/is being stopped. Note
                         * that we ignore the quiesce state, since we are
                         * concerned about the actual device state.
                         */
                        if (!idev)
                                status = SAS_DEVICE_UNKNOWN;
                        else
                                status = SAS_ABORTED_TASK;

                        if (SAS_PROTOCOL_SMP == task->task_proto) {
                                request->complete_in_target = true;
                                complete_to_host = isci_perform_normal_io_completion;
                        } else {
                                request->complete_in_target = false;
                                complete_to_host = isci_perform_error_io_completion;
                        }
                        break;
                }
                break;
        }

        isci_request_unmap_sgl(request, isci_host->pdev);

        /* Put the completed request on the correct list */
        isci_task_save_for_upper_layer_completion(isci_host, request, response,
                                                  status, complete_to_host
                                                  );

        /* complete the io request to the core. */
        scic_controller_complete_io(&isci_host->sci,
                                    request->sci.target_device,
                                    &request->sci);
        isci_put_device(idev);

        /* set terminated handle so it cannot be completed or
         * terminated again, and to cause any calls into abort
         * task to recognize the already completed case.
         */
        request->terminated = true;

        isci_host_can_dequeue(isci_host, 1);
}

static void scic_sds_request_started_state_enter(struct sci_base_state_machine *sm)
{
        struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm);
        struct isci_request *ireq = sci_req_to_ireq(sci_req);
        struct domain_device *dev = sci_dev_to_domain(sci_req->target_device);
        struct sas_task *task;

        /* XXX as hch said always creating an internal sas_task for tmf
         * requests would simplify the driver
         */
        task = ireq->ttype == io_task ? isci_request_access_task(ireq) : NULL;

        /* all unaccelerated request types (non ssp or ncq) handled with
         * substates
         */
        if (!task && dev->dev_type == SAS_END_DEV) {
                sci_change_state(sm, SCI_REQ_TASK_WAIT_TC_COMP);
        } else if (!task &&
                   (isci_request_access_tmf(ireq)->tmf_code == isci_tmf_sata_srst_high ||
                    isci_request_access_tmf(ireq)->tmf_code == isci_tmf_sata_srst_low)) {
                sci_change_state(sm, SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED);
        } else if (task && task->task_proto == SAS_PROTOCOL_SMP) {
                sci_change_state(sm, SCI_REQ_SMP_WAIT_RESP);
        } else if (task && sas_protocol_ata(task->task_proto) &&
                   !task->ata_task.use_ncq) {
                u32 state;

                if (task->data_dir == DMA_NONE)
                        state = SCI_REQ_STP_NON_DATA_WAIT_H2D;
                else if (task->ata_task.dma_xfer)
                        state = SCI_REQ_STP_UDMA_WAIT_TC_COMP;
                else /* PIO */
                        state = SCI_REQ_STP_PIO_WAIT_H2D;

                sci_change_state(sm, state);
        }
}

static void scic_sds_request_completed_state_enter(struct sci_base_state_machine *sm)
{
        struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm);
        struct scic_sds_controller *scic = sci_req->owning_controller;
        struct isci_host *ihost = scic_to_ihost(scic);
        struct isci_request *ireq = sci_req_to_ireq(sci_req);

        /* Tell the SCI_USER that the IO request is complete */
        if (sci_req->is_task_management_request == false)
                isci_request_io_request_complete(ihost, ireq,
                                                 sci_req->sci_status);
        else
                isci_task_request_complete(ihost, ireq, sci_req->sci_status);
}

static void scic_sds_request_aborting_state_enter(struct sci_base_state_machine *sm)
{
        struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm);

        /* Setting the abort bit in the Task Context is required by the silicon. */
        sci_req->task_context_buffer->abort = 1;
}

static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter(struct sci_base_state_machine *sm)
{
        struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm);

        scic_sds_remote_device_set_working_request(sci_req->target_device,
                                                   sci_req);
}

static void scic_sds_stp_request_started_pio_await_h2d_completion_enter(struct sci_base_state_machine *sm)
{
        struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm);

        scic_sds_remote_device_set_working_request(sci_req->target_device,
                                                   sci_req);
}

static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter(struct sci_base_state_machine *sm)
{
        struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm);

        scic_sds_remote_device_set_working_request(sci_req->target_device,
                                                   sci_req);
}

static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter(struct sci_base_state_machine *sm)
{
        struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm);
        struct scu_task_context *task_context;
        struct host_to_dev_fis *h2d_fis;
        enum sci_status status;

        /* Clear the SRST bit */
        h2d_fis = &sci_req->stp.cmd;
        h2d_fis->control = 0;

        /* Clear the TC control bit */
        task_context = scic_sds_controller_get_task_context_buffer(
                sci_req->owning_controller, sci_req->io_tag);
        task_context->control_frame = 0;

        status = scic_controller_continue_io(sci_req);
        WARN_ONCE(status != SCI_SUCCESS, "isci: continue io failure\n");
}

static const struct sci_base_state scic_sds_request_state_table[] = {
        [SCI_REQ_INIT] = { },
        [SCI_REQ_CONSTRUCTED] = { },
        [SCI_REQ_STARTED] = {
                .enter_state = scic_sds_request_started_state_enter,
        },
        [SCI_REQ_STP_NON_DATA_WAIT_H2D] = {
                .enter_state = scic_sds_stp_request_started_non_data_await_h2d_completion_enter,
        },
        [SCI_REQ_STP_NON_DATA_WAIT_D2H] = { },
        [SCI_REQ_STP_PIO_WAIT_H2D] = {
                .enter_state = scic_sds_stp_request_started_pio_await_h2d_completion_enter,
        },
        [SCI_REQ_STP_PIO_WAIT_FRAME] = { },
        [SCI_REQ_STP_PIO_DATA_IN] = { },
        [SCI_REQ_STP_PIO_DATA_OUT] = { },
        [SCI_REQ_STP_UDMA_WAIT_TC_COMP] = { },
        [SCI_REQ_STP_UDMA_WAIT_D2H] = { },
        [SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED] = {
                .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter,
        },
        [SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG] = {
                .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter,
        },
        [SCI_REQ_STP_SOFT_RESET_WAIT_D2H] = { },
        [SCI_REQ_TASK_WAIT_TC_COMP] = { },
        [SCI_REQ_TASK_WAIT_TC_RESP] = { },
        [SCI_REQ_SMP_WAIT_RESP] = { },
        [SCI_REQ_SMP_WAIT_TC_COMP] = { },
        [SCI_REQ_COMPLETED] = {
                .enter_state = scic_sds_request_completed_state_enter,
        },
        [SCI_REQ_ABORTING] = {
                .enter_state = scic_sds_request_aborting_state_enter,
        },
        [SCI_REQ_FINAL] = { },
};

static void
scic_sds_general_request_construct(struct scic_sds_controller *scic,
                                   struct scic_sds_remote_device *sci_dev,
                                   u16 io_tag,
                                   struct scic_sds_request *sci_req)
{
        sci_init_sm(&sci_req->sm, scic_sds_request_state_table, SCI_REQ_INIT);

        sci_req->io_tag = io_tag;
        sci_req->owning_controller = scic;
        sci_req->target_device = sci_dev;
        sci_req->protocol = SCIC_NO_PROTOCOL;
        sci_req->saved_rx_frame_index = SCU_INVALID_FRAME_INDEX;

        sci_req->sci_status   = SCI_SUCCESS;
        sci_req->scu_status   = 0;
        sci_req->post_context = 0xFFFFFFFF;

        sci_req->is_task_management_request = false;

        if (io_tag == SCI_CONTROLLER_INVALID_IO_TAG) {
                sci_req->was_tag_assigned_by_user = false;
                sci_req->task_context_buffer = &sci_req->tc;
        } else {
                sci_req->was_tag_assigned_by_user = true;

                sci_req->task_context_buffer =
                        scic_sds_controller_get_task_context_buffer(scic, io_tag);
        }
}

static enum sci_status
scic_io_request_construct(struct scic_sds_controller *scic,
                          struct scic_sds_remote_device *sci_dev,
                          u16 io_tag, struct scic_sds_request *sci_req)
{
        struct domain_device *dev = sci_dev_to_domain(sci_dev);
        enum sci_status status = SCI_SUCCESS;

        /* Build the common part of the request */
        scic_sds_general_request_construct(scic, sci_dev, io_tag, sci_req);

        if (sci_dev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX)
                return SCI_FAILURE_INVALID_REMOTE_DEVICE;

        if (dev->dev_type == SAS_END_DEV)
                /* pass */;
        else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP))
                memset(&sci_req->stp.cmd, 0, sizeof(sci_req->stp.cmd));
        else if (dev_is_expander(dev))
                memset(&sci_req->smp.cmd, 0, sizeof(sci_req->smp.cmd));
        else
                return SCI_FAILURE_UNSUPPORTED_PROTOCOL;

        memset(sci_req->task_context_buffer, 0,
               offsetof(struct scu_task_context, sgl_pair_ab));

        return status;
}

enum sci_status scic_task_request_construct(struct scic_sds_controller *scic,
                                            struct scic_sds_remote_device *sci_dev,
                                            u16 io_tag, struct scic_sds_request *sci_req)
{
        struct domain_device *dev = sci_dev_to_domain(sci_dev);
        enum sci_status status = SCI_SUCCESS;

        /* Build the common part of the request */
        scic_sds_general_request_construct(scic, sci_dev, io_tag, sci_req);

        if (dev->dev_type == SAS_END_DEV ||
            dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
                sci_req->is_task_management_request = true;
                memset(sci_req->task_context_buffer, 0, sizeof(struct scu_task_context));
        } else
                status = SCI_FAILURE_UNSUPPORTED_PROTOCOL;

        return status;
}

static enum sci_status isci_request_ssp_request_construct(
        struct isci_request *request)
{
        enum sci_status status;

        dev_dbg(&request->isci_host->pdev->dev,
                "%s: request = %p\n",
                __func__,
                request);
        status = scic_io_request_construct_basic_ssp(&request->sci);
        return status;
}

static enum sci_status isci_request_stp_request_construct(
        struct isci_request *request)
{
        struct sas_task *task = isci_request_access_task(request);
        enum sci_status status;
        struct host_to_dev_fis *register_fis;

        dev_dbg(&request->isci_host->pdev->dev,
                "%s: request = %p\n",
                __func__,
                request);

        /* Get the host_to_dev_fis from the core and copy
         * the fis from the task into it.
         */
        register_fis = isci_sata_task_to_fis_copy(task);

        status = scic_io_request_construct_basic_sata(&request->sci);

        /* Set the ncq tag in the fis, from the queue
         * command in the task.
         */
        if (isci_sata_is_task_ncq(task)) {

                isci_sata_set_ncq_tag(
                        register_fis,
                        task
                        );
        }

        return status;
}

/*
 * This function will fill in the SCU Task Context for a SMP request. The
 *    following important settings are utilized: -# task_type ==
 *    SCU_TASK_TYPE_SMP.  This simply indicates that a normal request type
 *    (i.e. non-raw frame) is being utilized to perform task management. -#
 *    control_frame == 1.  This ensures that the proper endianess is set so
 *    that the bytes are transmitted in the right order for a smp request frame.
 * @sci_req: This parameter specifies the smp request object being
 *    constructed.
 *
 */
static void
scu_smp_request_construct_task_context(struct scic_sds_request *sci_req,
                                       ssize_t req_len)
{
        dma_addr_t dma_addr;
        struct scic_sds_remote_device *sci_dev;
        struct scic_sds_port *sci_port;
        struct scu_task_context *task_context;
        ssize_t word_cnt = sizeof(struct smp_req) / sizeof(u32);

        /* byte swap the smp request. */
        sci_swab32_cpy(&sci_req->smp.cmd, &sci_req->smp.cmd,
                       word_cnt);

        task_context = scic_sds_request_get_task_context(sci_req);

        sci_dev = scic_sds_request_get_device(sci_req);
        sci_port = scic_sds_request_get_port(sci_req);

        /*
         * Fill in the TC with the its required data
         * 00h
         */
        task_context->priority = 0;
        task_context->initiator_request = 1;
        task_context->connection_rate = sci_dev->connection_rate;
        task_context->protocol_engine_index =
                scic_sds_controller_get_protocol_engine_group(scic);
        task_context->logical_port_index = scic_sds_port_get_index(sci_port);
        task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SMP;
        task_context->abort = 0;
        task_context->valid = SCU_TASK_CONTEXT_VALID;
        task_context->context_type = SCU_TASK_CONTEXT_TYPE;

        /* 04h */
        task_context->remote_node_index = sci_dev->rnc.remote_node_index;
        task_context->command_code = 0;
        task_context->task_type = SCU_TASK_TYPE_SMP_REQUEST;

        /* 08h */
        task_context->link_layer_control = 0;
        task_context->do_not_dma_ssp_good_response = 1;
        task_context->strict_ordering = 0;
        task_context->control_frame = 1;
        task_context->timeout_enable = 0;
        task_context->block_guard_enable = 0;

        /* 0ch */
        task_context->address_modifier = 0;

        /* 10h */
        task_context->ssp_command_iu_length = req_len;

        /* 14h */
        task_context->transfer_length_bytes = 0;

        /*
         * 18h ~ 30h, protocol specific
         * since commandIU has been build by framework at this point, we just
         * copy the frist DWord from command IU to this location. */
        memcpy(&task_context->type.smp, &sci_req->smp.cmd, sizeof(u32));

        /*
         * 40h
         * "For SMP you could program it to zero. We would prefer that way
         * so that done code will be consistent." - Venki
         */
        task_context->task_phase = 0;

        if (sci_req->was_tag_assigned_by_user) {
                /*
                 * Build the task context now since we have already read
                 * the data
                 */
                sci_req->post_context =
                        (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
                         (scic_sds_controller_get_protocol_engine_group(scic) <<
                          SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) |
                         (scic_sds_port_get_index(sci_port) <<
                          SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) |
                          ISCI_TAG_TCI(sci_req->io_tag));
        } else {
                /*
                 * Build the task context now since we have already read
                 * the data.
                 * I/O tag index is not assigned because we have to wait
                 * until we get a TCi.
                 */
                sci_req->post_context =
                        (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
                         (scic_sds_controller_get_protocol_engine_group(scic) <<
                          SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) |
                         (scic_sds_port_get_index(sci_port) <<
                          SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT));
        }

        /*
         * Copy the physical address for the command buffer to the SCU Task
         * Context command buffer should not contain command header.
         */
        dma_addr = scic_io_request_get_dma_addr(sci_req,
                                                ((char *) &sci_req->smp.cmd) +
                                                sizeof(u32));

        task_context->command_iu_upper = upper_32_bits(dma_addr);
        task_context->command_iu_lower = lower_32_bits(dma_addr);

        /* SMP response comes as UF, so no need to set response IU address. */
        task_context->response_iu_upper = 0;
        task_context->response_iu_lower = 0;
}

static enum sci_status
scic_io_request_construct_smp(struct scic_sds_request *sci_req)
{
        struct smp_req *smp_req = &sci_req->smp.cmd;

        sci_req->protocol = SCIC_SMP_PROTOCOL;

        /*
         * Look at the SMP requests' header fields; for certain SAS 1.x SMP
         * functions under SAS 2.0, a zero request length really indicates
         * a non-zero default length.
         */
        if (smp_req->req_len == 0) {
                switch (smp_req->func) {
                case SMP_DISCOVER:
                case SMP_REPORT_PHY_ERR_LOG:
                case SMP_REPORT_PHY_SATA:
                case SMP_REPORT_ROUTE_INFO:
                        smp_req->req_len = 2;
                        break;
                case SMP_CONF_ROUTE_INFO:
                case SMP_PHY_CONTROL:
                case SMP_PHY_TEST_FUNCTION:
                        smp_req->req_len = 9;
                        break;
                        /* Default - zero is a valid default for 2.0. */
                }
        }

        scu_smp_request_construct_task_context(sci_req, smp_req->req_len);

        sci_change_state(&sci_req->sm, SCI_REQ_CONSTRUCTED);

        return SCI_SUCCESS;
}

/*
 * isci_smp_request_build() - This function builds the smp request.
 * @ireq: This parameter points to the isci_request allocated in the
 *    request construct function.
 *
 * SCI_SUCCESS on successfull completion, or specific failure code.
 */
static enum sci_status isci_smp_request_build(struct isci_request *ireq)
{
        enum sci_status status = SCI_FAILURE;
        struct sas_task *task = isci_request_access_task(ireq);
        struct scic_sds_request *sci_req = &ireq->sci;

        dev_dbg(&ireq->isci_host->pdev->dev,
                "%s: request = %p\n", __func__, ireq);

        dev_dbg(&ireq->isci_host->pdev->dev,
                "%s: smp_req len = %d\n",
                __func__,
                task->smp_task.smp_req.length);

        /* copy the smp_command to the address; */
        sg_copy_to_buffer(&task->smp_task.smp_req, 1,
                          &sci_req->smp.cmd,
                          sizeof(struct smp_req));

        status = scic_io_request_construct_smp(sci_req);
        if (status != SCI_SUCCESS)
                dev_warn(&ireq->isci_host->pdev->dev,
                         "%s: failed with status = %d\n",
                         __func__,
                         status);

        return status;
}

/**
 * isci_io_request_build() - This function builds the io request object.
 * @isci_host: This parameter specifies the ISCI host object
 * @request: This parameter points to the isci_request object allocated in the
 *    request construct function.
 * @sci_device: This parameter is the handle for the sci core's remote device
 *    object that is the destination for this request.
 *
 * SCI_SUCCESS on successfull completion, or specific failure code.
 */
static enum sci_status isci_io_request_build(
        struct isci_host *isci_host,
        struct isci_request *request,
        struct isci_remote_device *isci_device)
{
        enum sci_status status = SCI_SUCCESS;
        struct sas_task *task = isci_request_access_task(request);
        struct scic_sds_remote_device *sci_device = &isci_device->sci;

        dev_dbg(&isci_host->pdev->dev,
                "%s: isci_device = 0x%p; request = %p, "
                "num_scatter = %d\n",
                __func__,
                isci_device,
                request,
                task->num_scatter);

        /* map the sgl addresses, if present.
         * libata does the mapping for sata devices
         * before we get the request.
         */
        if (task->num_scatter &&
            !sas_protocol_ata(task->task_proto) &&
            !(SAS_PROTOCOL_SMP & task->task_proto)) {

                request->num_sg_entries = dma_map_sg(
                        &isci_host->pdev->dev,
                        task->scatter,
                        task->num_scatter,
                        task->data_dir
                        );

                if (request->num_sg_entries == 0)
                        return SCI_FAILURE_INSUFFICIENT_RESOURCES;
        }

        /* build the common request object. For now,
         * we will let the core allocate the IO tag.
         */
        status = scic_io_request_construct(&isci_host->sci, sci_device,
                                           SCI_CONTROLLER_INVALID_IO_TAG,
                                           &request->sci);

        if (status != SCI_SUCCESS) {
                dev_warn(&isci_host->pdev->dev,
                         "%s: failed request construct\n",
                         __func__);
                return SCI_FAILURE;
        }

        switch (task->task_proto) {
        case SAS_PROTOCOL_SMP:
                status = isci_smp_request_build(request);
                break;
        case SAS_PROTOCOL_SSP:
                status = isci_request_ssp_request_construct(request);
                break;
        case SAS_PROTOCOL_SATA:
        case SAS_PROTOCOL_STP:
        case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
                status = isci_request_stp_request_construct(request);
                break;
        default:
                dev_warn(&isci_host->pdev->dev,
                         "%s: unknown protocol\n", __func__);
                return SCI_FAILURE;
        }

        return SCI_SUCCESS;
}

static struct isci_request *isci_request_alloc_core(struct isci_host *ihost,
                                                    gfp_t gfp_flags)
{
        dma_addr_t handle;
        struct isci_request *ireq;

        ireq = dma_pool_alloc(ihost->dma_pool, gfp_flags, &handle);
        if (!ireq) {
                dev_warn(&ihost->pdev->dev,
                         "%s: dma_pool_alloc returned NULL\n", __func__);
                return NULL;
        }

        /* initialize the request object.       */
        spin_lock_init(&ireq->state_lock);
        ireq->request_daddr = handle;
        ireq->isci_host = ihost;
        ireq->io_request_completion = NULL;
        ireq->terminated = false;

        ireq->num_sg_entries = 0;

        ireq->complete_in_target = false;

        INIT_LIST_HEAD(&ireq->completed_node);
        INIT_LIST_HEAD(&ireq->dev_node);

        isci_request_change_state(ireq, allocated);

        return ireq;
}

static struct isci_request *isci_request_alloc_io(struct isci_host *ihost,
                                                  struct sas_task *task,
                                                  gfp_t gfp_flags)
{
        struct isci_request *ireq;

        ireq = isci_request_alloc_core(ihost, gfp_flags);
        if (ireq) {
                ireq->ttype_ptr.io_task_ptr = task;
                ireq->ttype = io_task;
                task->lldd_task = ireq;
        }
        return ireq;
}

struct isci_request *isci_request_alloc_tmf(struct isci_host *ihost,
                                            struct isci_tmf *isci_tmf,
                                            gfp_t gfp_flags)
{
        struct isci_request *ireq;

        ireq = isci_request_alloc_core(ihost, gfp_flags);
        if (ireq) {
                ireq->ttype_ptr.tmf_task_ptr = isci_tmf;
                ireq->ttype = tmf_task;
        }
        return ireq;
}

int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *idev,
                         struct sas_task *task, gfp_t gfp_flags)
{
        enum sci_status status = SCI_FAILURE_UNSUPPORTED_PROTOCOL;
        struct isci_request *ireq;
        unsigned long flags;
        int ret = 0;

        /* do common allocation and init of request object. */
        ireq = isci_request_alloc_io(ihost, task, gfp_flags);
        if (!ireq)
                goto out;

        status = isci_io_request_build(ihost, ireq, idev);
        if (status != SCI_SUCCESS) {
                dev_warn(&ihost->pdev->dev,
                         "%s: request_construct failed - status = 0x%x\n",
                         __func__,
                         status);
                goto out;
        }

        spin_lock_irqsave(&ihost->scic_lock, flags);

        /* send the request, let the core assign the IO TAG.    */
        status = scic_controller_start_io(&ihost->sci, &idev->sci, &ireq->sci,
                                          SCI_CONTROLLER_INVALID_IO_TAG);
        if (status != SCI_SUCCESS &&
            status != SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) {
                dev_warn(&ihost->pdev->dev,
                         "%s: failed request start (0x%x)\n",
                         __func__, status);
                spin_unlock_irqrestore(&ihost->scic_lock, flags);
                goto out;
        }

        /* Either I/O started OK, or the core has signaled that
         * the device needs a target reset.
         *
         * In either case, hold onto the I/O for later.
         *
         * Update it's status and add it to the list in the
         * remote device object.
         */
        list_add(&ireq->dev_node, &idev->reqs_in_process);

        if (status == SCI_SUCCESS) {
                /* Save the tag for possible task mgmt later. */
                ireq->io_tag = ireq->sci.io_tag;
                isci_request_change_state(ireq, started);
        } else {
                /* The request did not really start in the
                 * hardware, so clear the request handle
                 * here so no terminations will be done.
                 */
                ireq->terminated = true;
                isci_request_change_state(ireq, completed);
        }
        spin_unlock_irqrestore(&ihost->scic_lock, flags);

        if (status ==
            SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) {
                /* Signal libsas that we need the SCSI error
                * handler thread to work on this I/O and that
                * we want a device reset.
                */
                spin_lock_irqsave(&task->task_state_lock, flags);
                task->task_state_flags |= SAS_TASK_NEED_DEV_RESET;
                spin_unlock_irqrestore(&task->task_state_lock, flags);

                /* Cause this task to be scheduled in the SCSI error
                * handler thread.
                */
                isci_execpath_callback(ihost, task,
                                       sas_task_abort);

                /* Change the status, since we are holding
                * the I/O until it is managed by the SCSI
                * error handler.
                */
                status = SCI_SUCCESS;
        }

 out:
        if (status != SCI_SUCCESS) {
                /* release dma memory on failure. */
                isci_request_free(ihost, ireq);
                ireq = NULL;
                ret = SCI_FAILURE;
        }

        return ret;
}