?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
sparc32,leon: add GRPCI2 PCI Host driver
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / sparc / kernel / leon_pci_grpci2.c
blob44dc093ee33a4b0948c83e84b73d9eabb33c1bb7
1 /*
2 * leon_pci_grpci2.c: GRPCI2 Host PCI driver
3 *
4 * Copyright (C) 2011 Aeroflex Gaisler AB, Daniel Hellstrom
5 *
6 */
7
8 #include <linux/of_device.h>
9 #include <linux/kernel.h>
10 #include <linux/pci.h>
11 #include <linux/delay.h>
12 #include <linux/module.h>
13 #include <asm/io.h>
14 #include <asm/leon.h>
15 #include <asm/vaddrs.h>
16 #include <asm/sections.h>
17 #include <asm/leon_pci.h>
18
19 #include "irq.h"
20
21 struct grpci2_barcfg {
22 unsigned long pciadr; /* PCI Space Address */
23 unsigned long ahbadr; /* PCI Base address mapped to this AHB addr */
24 };
25
26 /* Device Node Configuration options:
27 * - barcfgs : Custom Configuration of Host's 6 target BARs
28 * - irq_mask : Limit which PCI interrupts are enabled
29 * - do_reset : Force PCI Reset on startup
30 *
31 * barcfgs
32 * =======
33 *
34 * Optional custom Target BAR configuration (see struct grpci2_barcfg). All
35 * addresses are physical. Array always contains 6 elements (len=2*4*6 bytes)
36 *
37 * -1 means not configured (let host driver do default setup).
38 *
39 * [i*2+0] = PCI Address of BAR[i] on target interface
40 * [i*2+1] = Accessing PCI address of BAR[i] result in this AMBA address
41 *
42 *
43 * irq_mask
44 * ========
45 *
46 * Limit which PCI interrupts are enabled. 0=Disable, 1=Enable. By default
47 * all are enabled. Use this when PCI interrupt pins are floating on PCB.
48 * int, len=4.
49 * bit0 = PCI INTA#
50 * bit1 = PCI INTB#
51 * bit2 = PCI INTC#
52 * bit3 = PCI INTD#
53 *
54 *
55 * reset
56 * =====
57 *
58 * Force PCI reset on startup. int, len=4
59 */
60
61 /* Enable Debugging Configuration Space Access */
62 #undef GRPCI2_DEBUG_CFGACCESS
63
64 /*
65 * GRPCI2 APB Register MAP
66 */
67 struct grpci2_regs {
68 unsigned int ctrl; /* 0x00 Control */
69 unsigned int sts_cap; /* 0x04 Status / Capabilities */
70 int res1; /* 0x08 */
71 unsigned int io_map; /* 0x0C I/O Map address */
72 unsigned int dma_ctrl; /* 0x10 DMA */
73 unsigned int dma_bdbase; /* 0x14 DMA */
74 int res2[2]; /* 0x18 */
75 unsigned int bars[6]; /* 0x20 read-only PCI BARs */
76 int res3[2]; /* 0x38 */
77 unsigned int ahbmst_map[16]; /* 0x40 AHB->PCI Map per AHB Master */
78
79 /* PCI Trace Buffer Registers (OPTIONAL) */
80 unsigned int t_ctrl; /* 0x80 */
81 unsigned int t_cnt; /* 0x84 */
82 unsigned int t_adpat; /* 0x88 */
83 unsigned int t_admask; /* 0x8C */
84 unsigned int t_sigpat; /* 0x90 */
85 unsigned int t_sigmask; /* 0x94 */
86 unsigned int t_adstate; /* 0x98 */
87 unsigned int t_sigstate; /* 0x9C */
88 };
89
90 #define REGLOAD(a) (be32_to_cpu(__raw_readl(&(a))))
91 #define REGSTORE(a, v) (__raw_writel(cpu_to_be32(v), &(a)))
92
93 #define CTRL_BUS_BIT 16
94
95 #define CTRL_RESET (1<<31)
96 #define CTRL_SI (1<<27)
97 #define CTRL_PE (1<<26)
98 #define CTRL_EI (1<<25)
99 #define CTRL_ER (1<<24)
100 #define CTRL_BUS (0xff<<CTRL_BUS_BIT)
101 #define CTRL_HOSTINT 0xf
102
103 #define STS_HOST_BIT 31
104 #define STS_MST_BIT 30
105 #define STS_TAR_BIT 29
106 #define STS_DMA_BIT 28
107 #define STS_DI_BIT 27
108 #define STS_HI_BIT 26
109 #define STS_IRQMODE_BIT 24
110 #define STS_TRACE_BIT 23
111 #define STS_CFGERRVALID_BIT 20
112 #define STS_CFGERR_BIT 19
113 #define STS_INTTYPE_BIT 12
114 #define STS_INTSTS_BIT 8
115 #define STS_FDEPTH_BIT 2
116 #define STS_FNUM_BIT 0
117
118 #define STS_HOST (1<<STS_HOST_BIT)
119 #define STS_MST (1<<STS_MST_BIT)
120 #define STS_TAR (1<<STS_TAR_BIT)
121 #define STS_DMA (1<<STS_DMA_BIT)
122 #define STS_DI (1<<STS_DI_BIT)
123 #define STS_HI (1<<STS_HI_BIT)
124 #define STS_IRQMODE (0x3<<STS_IRQMODE_BIT)
125 #define STS_TRACE (1<<STS_TRACE_BIT)
126 #define STS_CFGERRVALID (1<<STS_CFGERRVALID_BIT)
127 #define STS_CFGERR (1<<STS_CFGERR_BIT)
128 #define STS_INTTYPE (0x3f<<STS_INTTYPE_BIT)
129 #define STS_INTSTS (0xf<<STS_INTSTS_BIT)
130 #define STS_FDEPTH (0x7<<STS_FDEPTH_BIT)
131 #define STS_FNUM (0x3<<STS_FNUM_BIT)
132
133 #define STS_ISYSERR (1<<17)
134 #define STS_IDMA (1<<16)
135 #define STS_IDMAERR (1<<15)
136 #define STS_IMSTABRT (1<<14)
137 #define STS_ITGTABRT (1<<13)
138 #define STS_IPARERR (1<<12)
139
140 #define STS_ERR_IRQ (STS_ISYSERR | STS_IMSTABRT | STS_ITGTABRT | STS_IPARERR)
141
142 struct grpci2_bd_chan {
143 unsigned int ctrl; /* 0x00 DMA Control */
144 unsigned int nchan; /* 0x04 Next DMA Channel Address */
145 unsigned int nbd; /* 0x08 Next Data Descriptor in chan */
146 unsigned int res; /* 0x0C Reserved */
147 };
148
149 #define BD_CHAN_EN 0x80000000
150 #define BD_CHAN_TYPE 0x00300000
151 #define BD_CHAN_BDCNT 0x0000ffff
152 #define BD_CHAN_EN_BIT 31
153 #define BD_CHAN_TYPE_BIT 20
154 #define BD_CHAN_BDCNT_BIT 0
155
156 struct grpci2_bd_data {
157 unsigned int ctrl; /* 0x00 DMA Data Control */
158 unsigned int pci_adr; /* 0x04 PCI Start Address */
159 unsigned int ahb_adr; /* 0x08 AHB Start address */
160 unsigned int next; /* 0x0C Next Data Descriptor in chan */
161 };
162
163 #define BD_DATA_EN 0x80000000
164 #define BD_DATA_IE 0x40000000
165 #define BD_DATA_DR 0x20000000
166 #define BD_DATA_TYPE 0x00300000
167 #define BD_DATA_ER 0x00080000
168 #define BD_DATA_LEN 0x0000ffff
169 #define BD_DATA_EN_BIT 31
170 #define BD_DATA_IE_BIT 30
171 #define BD_DATA_DR_BIT 29
172 #define BD_DATA_TYPE_BIT 20
173 #define BD_DATA_ER_BIT 19
174 #define BD_DATA_LEN_BIT 0
175
176 /* GRPCI2 Capability */
177 struct grpci2_cap_first {
178 unsigned int ctrl;
179 unsigned int pci2ahb_map[6];
180 unsigned int ext2ahb_map;
181 unsigned int io_map;
182 unsigned int pcibar_size[6];
183 };
184 #define CAP9_CTRL_OFS 0
185 #define CAP9_BAR_OFS 0x4
186 #define CAP9_IOMAP_OFS 0x20
187 #define CAP9_BARSIZE_OFS 0x24
188
189 struct grpci2_priv {
190 struct leon_pci_info info; /* must be on top of this structure */
191 struct grpci2_regs *regs;
192 char irq;
193 char irq_mode; /* IRQ Mode from CAPSTS REG */
194 char bt_enabled;
195 char do_reset;
196 char irq_mask;
197 u32 pciid; /* PCI ID of Host */
198 unsigned char irq_map[4];
199
200 /* Virtual IRQ numbers */
201 unsigned int virq_err;
202 unsigned int virq_dma;
203
204 /* AHB PCI Windows */
205 unsigned long pci_area; /* MEMORY */
206 unsigned long pci_area_end;
207 unsigned long pci_io; /* I/O */
208 unsigned long pci_conf; /* CONFIGURATION */
209 unsigned long pci_conf_end;
210 unsigned long pci_io_va;
211
212 struct grpci2_barcfg tgtbars[6];
213 };
214
215 DEFINE_SPINLOCK(grpci2_dev_lock);
216 struct grpci2_priv *grpci2priv;
217
218 int grpci2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
219 {
220 struct grpci2_priv *priv = dev->bus->sysdata;
221 int irq_group;
222
223 /* Use default IRQ decoding on PCI BUS0 according slot numbering */
224 irq_group = slot & 0x3;
225 pin = ((pin - 1) + irq_group) & 0x3;
226
227 return priv->irq_map[pin];
228 }
229
230 static int grpci2_cfg_r32(struct grpci2_priv *priv, unsigned int bus,
231 unsigned int devfn, int where, u32 *val)
232 {
233 unsigned int *pci_conf;
234 unsigned long flags;
235 u32 tmp;
236
237 if (where & 0x3)
238 return -EINVAL;
239
240 if (bus == 0 && PCI_SLOT(devfn) != 0)
241 devfn += (0x8 * 6);
242
243 /* Select bus */
244 spin_lock_irqsave(&grpci2_dev_lock, flags);
245 REGSTORE(priv->regs->ctrl, (REGLOAD(priv->regs->ctrl) & ~(0xff << 16)) |
246 (bus << 16));
247 spin_unlock_irqrestore(&grpci2_dev_lock, flags);
248
249 /* clear old status */
250 REGSTORE(priv->regs->sts_cap, (STS_CFGERR | STS_CFGERRVALID));
251
252 pci_conf = (unsigned int *) (priv->pci_conf |
253 (devfn << 8) | (where & 0xfc));
254 tmp = LEON3_BYPASS_LOAD_PA(pci_conf);
255
256 /* Wait until GRPCI2 signals that CFG access is done, it should be
257 * done instantaneously unless a DMA operation is ongoing...
258 */
259 while ((REGLOAD(priv->regs->sts_cap) & STS_CFGERRVALID) == 0)
260 ;
261
262 if (REGLOAD(priv->regs->sts_cap) & STS_CFGERR) {
263 *val = 0xffffffff;
264 } else {
265 /* Bus always little endian (unaffected by byte-swapping) */
266 *val = flip_dword(tmp);
267 }
268
269 return 0;
270 }
271
272 static int grpci2_cfg_r16(struct grpci2_priv *priv, unsigned int bus,
273 unsigned int devfn, int where, u32 *val)
274 {
275 u32 v;
276 int ret;
277
278 if (where & 0x1)
279 return -EINVAL;
280 ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
281 *val = 0xffff & (v >> (8 * (where & 0x3)));
282 return ret;
283 }
284
285 static int grpci2_cfg_r8(struct grpci2_priv *priv, unsigned int bus,
286 unsigned int devfn, int where, u32 *val)
287 {
288 u32 v;
289 int ret;
290
291 ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
292 *val = 0xff & (v >> (8 * (where & 3)));
293
294 return ret;
295 }
296
297 static int grpci2_cfg_w32(struct grpci2_priv *priv, unsigned int bus,
298 unsigned int devfn, int where, u32 val)
299 {
300 unsigned int *pci_conf;
301 unsigned long flags;
302
303 if (where & 0x3)
304 return -EINVAL;
305
306 if (bus == 0 && PCI_SLOT(devfn) != 0)
307 devfn += (0x8 * 6);
308
309 /* Select bus */
310 spin_lock_irqsave(&grpci2_dev_lock, flags);
311 REGSTORE(priv->regs->ctrl, (REGLOAD(priv->regs->ctrl) & ~(0xff << 16)) |
312 (bus << 16));
313 spin_unlock_irqrestore(&grpci2_dev_lock, flags);
314
315 /* clear old status */
316 REGSTORE(priv->regs->sts_cap, (STS_CFGERR | STS_CFGERRVALID));
317
318 pci_conf = (unsigned int *) (priv->pci_conf |
319 (devfn << 8) | (where & 0xfc));
320 LEON3_BYPASS_STORE_PA(pci_conf, flip_dword(val));
321
322 /* Wait until GRPCI2 signals that CFG access is done, it should be
323 * done instantaneously unless a DMA operation is ongoing...
324 */
325 while ((REGLOAD(priv->regs->sts_cap) & STS_CFGERRVALID) == 0)
326 ;
327
328 return 0;
329 }
330
331 static int grpci2_cfg_w16(struct grpci2_priv *priv, unsigned int bus,
332 unsigned int devfn, int where, u32 val)
333 {
334 int ret;
335 u32 v;
336
337 if (where & 0x1)
338 return -EINVAL;
339 ret = grpci2_cfg_r32(priv, bus, devfn, where&~3, &v);
340 if (ret)
341 return ret;
342 v = (v & ~(0xffff << (8 * (where & 0x3)))) |
343 ((0xffff & val) << (8 * (where & 0x3)));
344 return grpci2_cfg_w32(priv, bus, devfn, where & ~0x3, v);
345 }
346
347 static int grpci2_cfg_w8(struct grpci2_priv *priv, unsigned int bus,
348 unsigned int devfn, int where, u32 val)
349 {
350 int ret;
351 u32 v;
352
353 ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
354 if (ret != 0)
355 return ret;
356 v = (v & ~(0xff << (8 * (where & 0x3)))) |
357 ((0xff & val) << (8 * (where & 0x3)));
358 return grpci2_cfg_w32(priv, bus, devfn, where & ~0x3, v);
359 }
360
361 /* Read from Configuration Space. When entering here the PCI layer has taken
362 * the pci_lock spinlock and IRQ is off.
363 */
364 static int grpci2_read_config(struct pci_bus *bus, unsigned int devfn,
365 int where, int size, u32 *val)
366 {
367 struct grpci2_priv *priv = grpci2priv;
368 unsigned int busno = bus->number;
369 int ret;
370
371 if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0)) {
372 *val = ~0;
373 return 0;
374 }
375
376 switch (size) {
377 case 1:
378 ret = grpci2_cfg_r8(priv, busno, devfn, where, val);
379 break;
380 case 2:
381 ret = grpci2_cfg_r16(priv, busno, devfn, where, val);
382 break;
383 case 4:
384 ret = grpci2_cfg_r32(priv, busno, devfn, where, val);
385 break;
386 default:
387 ret = -EINVAL;
388 break;
389 }
390
391 #ifdef GRPCI2_DEBUG_CFGACCESS
392 printk(KERN_INFO "grpci2_read_config: [%02x:%02x:%x] ofs=%d val=%x "
393 "size=%d\n", busno, PCI_SLOT(devfn), PCI_FUNC(devfn), where,
394 *val, size);
395 #endif
396
397 return ret;
398 }
399
400 /* Write to Configuration Space. When entering here the PCI layer has taken
401 * the pci_lock spinlock and IRQ is off.
402 */
403 static int grpci2_write_config(struct pci_bus *bus, unsigned int devfn,
404 int where, int size, u32 val)
405 {
406 struct grpci2_priv *priv = grpci2priv;
407 unsigned int busno = bus->number;
408
409 if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0))
410 return 0;
411
412 #ifdef GRPCI2_DEBUG_CFGACCESS
413 printk(KERN_INFO "grpci2_write_config: [%02x:%02x:%x] ofs=%d size=%d "
414 "val=%x\n", busno, PCI_SLOT(devfn), PCI_FUNC(devfn),
415 where, size, val);
416 #endif
417
418 switch (size) {
419 default:
420 return -EINVAL;
421 case 1:
422 return grpci2_cfg_w8(priv, busno, devfn, where, val);
423 case 2:
424 return grpci2_cfg_w16(priv, busno, devfn, where, val);
425 case 4:
426 return grpci2_cfg_w32(priv, busno, devfn, where, val);
427 }
428 }
429
430 static struct pci_ops grpci2_ops = {
431 .read = grpci2_read_config,
432 .write = grpci2_write_config,
433 };
434
435 /* GENIRQ IRQ chip implementation for GRPCI2 irqmode=0..2. In configuration
436 * 3 where all PCI Interrupts has a separate IRQ on the system IRQ controller
437 * this is not needed and the standard IRQ controller can be used.
438 */
439
440 static void grpci2_mask_irq(struct irq_data *data)
441 {
442 unsigned long flags;
443 unsigned int irqidx;
444 struct grpci2_priv *priv = grpci2priv;
445
446 irqidx = (unsigned int)data->chip_data - 1;
447 if (irqidx > 3) /* only mask PCI interrupts here */
448 return;
449
450 spin_lock_irqsave(&grpci2_dev_lock, flags);
451 REGSTORE(priv->regs->ctrl, REGLOAD(priv->regs->ctrl) & ~(1 << irqidx));
452 spin_unlock_irqrestore(&grpci2_dev_lock, flags);
453 }
454
455 static void grpci2_unmask_irq(struct irq_data *data)
456 {
457 unsigned long flags;
458 unsigned int irqidx;
459 struct grpci2_priv *priv = grpci2priv;
460
461 irqidx = (unsigned int)data->chip_data - 1;
462 if (irqidx > 3) /* only unmask PCI interrupts here */
463 return;
464
465 spin_lock_irqsave(&grpci2_dev_lock, flags);
466 REGSTORE(priv->regs->ctrl, REGLOAD(priv->regs->ctrl) | (1 << irqidx));
467 spin_unlock_irqrestore(&grpci2_dev_lock, flags);
468 }
469
470 static unsigned int grpci2_startup_irq(struct irq_data *data)
471 {
472 grpci2_unmask_irq(data);
473 return 0;
474 }
475
476 static void grpci2_shutdown_irq(struct irq_data *data)
477 {
478 grpci2_mask_irq(data);
479 }
480
481 static struct irq_chip grpci2_irq = {
482 .name = "grpci2",
483 .irq_startup = grpci2_startup_irq,
484 .irq_shutdown = grpci2_shutdown_irq,
485 .irq_mask = grpci2_mask_irq,
486 .irq_unmask = grpci2_unmask_irq,
487 };
488
489 /* Handle one or multiple IRQs from the PCI core */
490 static void grpci2_pci_flow_irq(unsigned int irq, struct irq_desc *desc)
491 {
492 struct grpci2_priv *priv = grpci2priv;
493 int i, ack = 0;
494 unsigned int ctrl, sts_cap, pci_ints;
495
496 ctrl = REGLOAD(priv->regs->ctrl);
497 sts_cap = REGLOAD(priv->regs->sts_cap);
498
499 /* Error Interrupt? */
500 if (sts_cap & STS_ERR_IRQ) {
501 generic_handle_irq(priv->virq_err);
502 ack = 1;
503 }
504
505 /* PCI Interrupt? */
506 pci_ints = ((~sts_cap) >> STS_INTSTS_BIT) & ctrl & CTRL_HOSTINT;
507 if (pci_ints) {
508 /* Call respective PCI Interrupt handler */
509 for (i = 0; i < 4; i++) {
510 if (pci_ints & (1 << i))
511 generic_handle_irq(priv->irq_map[i]);
512 }
513 ack = 1;
514 }
515
516 /*
517 * Decode DMA Interrupt only when shared with Err and PCI INTX#, when
518 * the DMA is a unique IRQ the DMA interrupts doesn't end up here, they
519 * goes directly to DMA ISR.
520 */
521 if ((priv->irq_mode == 0) && (sts_cap & (STS_IDMA | STS_IDMAERR))) {
522 generic_handle_irq(priv->virq_dma);
523 ack = 1;
524 }
525
526 /*
527 * Call "first level" IRQ chip end-of-irq handler. It will ACK LEON IRQ
528 * Controller, this must be done after IRQ sources have been handled to
529 * avoid double IRQ generation
530 */
531 if (ack)
532 desc->irq_data.chip->irq_eoi(&desc->irq_data);
533 }
534
535 /* Create a virtual IRQ */
536 static unsigned int grpci2_build_device_irq(unsigned int irq)
537 {
538 unsigned int virq = 0, pil;
539
540 pil = 1 << 8;
541 virq = irq_alloc(irq, pil);
542 if (virq == 0)
543 goto out;
544
545 irq_set_chip_and_handler_name(virq, &grpci2_irq, handle_simple_irq,
546 "pcilvl");
547 irq_set_chip_data(virq, (void *)irq);
548
549 out:
550 return virq;
551 }
552
553 void grpci2_hw_init(struct grpci2_priv *priv)
554 {
555 u32 ahbadr, pciadr, bar_sz, capptr, io_map, data;
556 struct grpci2_regs *regs = priv->regs;
557 int i;
558 struct grpci2_barcfg *barcfg = priv->tgtbars;
559
560 /* Reset any earlier setup */
561 if (priv->do_reset) {
562 printk(KERN_INFO "GRPCI2: Resetting PCI bus\n");
563 REGSTORE(regs->ctrl, CTRL_RESET);
564 ssleep(1); /* Wait for boards to settle */
565 }
566 REGSTORE(regs->ctrl, 0);
567 REGSTORE(regs->sts_cap, ~0); /* Clear Status */
568 REGSTORE(regs->dma_ctrl, 0);
569 REGSTORE(regs->dma_bdbase, 0);
570
571 /* Translate I/O accesses to 0, I/O Space always @ PCI low 64Kbytes */
572 REGSTORE(regs->io_map, REGLOAD(regs->io_map) & 0x0000ffff);
573
574 /* set 1:1 mapping between AHB -> PCI memory space, for all Masters
575 * Each AHB master has it's own mapping registers. Max 16 AHB masters.
576 */
577 for (i = 0; i < 16; i++)
578 REGSTORE(regs->ahbmst_map[i], priv->pci_area);
579
580 /* Get the GRPCI2 Host PCI ID */
581 grpci2_cfg_r32(priv, 0, 0, PCI_VENDOR_ID, &priv->pciid);
582
583 /* Get address to first (always defined) capability structure */
584 grpci2_cfg_r8(priv, 0, 0, PCI_CAPABILITY_LIST, &capptr);
585
586 /* Enable/Disable Byte twisting */
587 grpci2_cfg_r32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, &io_map);
588 io_map = (io_map & ~0x1) | (priv->bt_enabled ? 1 : 0);
589 grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, io_map);
590
591 /* Setup the Host's PCI Target BARs for other peripherals to access,
592 * and do DMA to the host's memory. The target BARs can be sized and
593 * enabled individually.
594 *
595 * User may set custom target BARs, but default is:
596 * The first BARs is used to map kernel low (DMA is part of normal
597 * region on sparc which is SRMMU_MAXMEM big) main memory 1:1 to the
598 * PCI bus, the other BARs are disabled. We assume that the first BAR
599 * is always available.
600 */
601 for (i = 0; i < 6; i++) {
602 if (barcfg[i].pciadr != ~0 && barcfg[i].ahbadr != ~0) {
603 /* Target BARs must have the proper alignment */
604 ahbadr = barcfg[i].ahbadr;
605 pciadr = barcfg[i].pciadr;
606 bar_sz = ((pciadr - 1) & ~pciadr) + 1;
607 } else {
608 if (i == 0) {
609 /* Map main memory */
610 bar_sz = 0xf0000008; /* 256MB prefetchable */
611 ahbadr = 0xf0000000 & (u32)__pa(PAGE_ALIGN(
612 (unsigned long) &_end));
613 pciadr = ahbadr;
614 } else {
615 bar_sz = 0;
616 ahbadr = 0;
617 pciadr = 0;
618 }
619 }
620 grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BARSIZE_OFS+i*4, bar_sz);
621 grpci2_cfg_w32(priv, 0, 0, PCI_BASE_ADDRESS_0+i*4, pciadr);
622 grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BAR_OFS+i*4, ahbadr);
623 printk(KERN_INFO " TGT BAR[%d]: 0x%08x (PCI)-> 0x%08x\n",
624 i, pciadr, ahbadr);
625 }
626
627 /* set as bus master and enable pci memory responses */
628 grpci2_cfg_r32(priv, 0, 0, PCI_COMMAND, &data);
629 data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
630 grpci2_cfg_w32(priv, 0, 0, PCI_COMMAND, data);
631
632 /* Enable Error respone (CPU-TRAP) on illegal memory access. */
633 REGSTORE(regs->ctrl, CTRL_ER | CTRL_PE);
634 }
635
636 static irqreturn_t grpci2_jump_interrupt(int irq, void *arg)
637 {
638 printk(KERN_ERR "GRPCI2: Jump IRQ happened\n");
639 return IRQ_NONE;
640 }
641
642 /* Handle GRPCI2 Error Interrupt */
643 static irqreturn_t grpci2_err_interrupt(int irq, void *arg)
644 {
645 struct grpci2_priv *priv = arg;
646 struct grpci2_regs *regs = priv->regs;
647 unsigned int status;
648
649 status = REGLOAD(regs->sts_cap);
650 if ((status & STS_ERR_IRQ) == 0)
651 return IRQ_NONE;
652
653 if (status & STS_IPARERR)
654 printk(KERN_ERR "GRPCI2: Parity Error\n");
655
656 if (status & STS_ITGTABRT)
657 printk(KERN_ERR "GRPCI2: Target Abort\n");
658
659 if (status & STS_IMSTABRT)
660 printk(KERN_ERR "GRPCI2: Master Abort\n");
661
662 if (status & STS_ISYSERR)
663 printk(KERN_ERR "GRPCI2: System Error\n");
664
665 /* Clear handled INT TYPE IRQs */
666 REGSTORE(regs->sts_cap, status & STS_ERR_IRQ);
667
668 return IRQ_HANDLED;
669 }
670
671 static int __devinit grpci2_of_probe(struct platform_device *ofdev)
672 {
673 struct grpci2_regs *regs;
674 struct grpci2_priv *priv;
675 int err, i, len;
676 const int *tmp;
677 unsigned int capability;
678
679 if (grpci2priv) {
680 printk(KERN_ERR "GRPCI2: only one GRPCI2 core supported\n");
681 return -ENODEV;
682 }
683
684 if (ofdev->num_resources < 3) {
685 printk(KERN_ERR "GRPCI2: not enough APB/AHB resources\n");
686 return -EIO;
687 }
688
689 /* Find Device Address */
690 regs = of_ioremap(&ofdev->resource[0], 0,
691 resource_size(&ofdev->resource[0]),
692 "grlib-grpci2 regs");
693 if (regs == NULL) {
694 printk(KERN_ERR "GRPCI2: ioremap failed\n");
695 return -EIO;
696 }
697
698 /*
699 * Check that we're in Host Slot and that we can act as a Host Bridge
700 * and not only as target.
701 */
702 capability = REGLOAD(regs->sts_cap);
703 if ((capability & STS_HOST) || !(capability & STS_MST)) {
704 printk(KERN_INFO "GRPCI2: not in host system slot\n");
705 err = -EIO;
706 goto err1;
707 }
708
709 priv = grpci2priv = kzalloc(sizeof(struct grpci2_priv), GFP_KERNEL);
710 if (grpci2priv == NULL) {
711 err = -ENOMEM;
712 goto err1;
713 }
714 memset(grpci2priv, 0, sizeof(*grpci2priv));
715 priv->regs = regs;
716 priv->irq = ofdev->archdata.irqs[0]; /* BASE IRQ */
717 priv->irq_mode = (capability & STS_IRQMODE) >> STS_IRQMODE_BIT;
718
719 printk(KERN_INFO "GRPCI2: host found at %p, irq%d\n", regs, priv->irq);
720
721 /* Byte twisting should be made configurable from kernel command line */
722 priv->bt_enabled = 1;
723
724 /* Let user do custom Target BAR assignment */
725 tmp = of_get_property(ofdev->dev.of_node, "barcfg", &len);
726 if (tmp && (len == 2*4*6))
727 memcpy(priv->tgtbars, tmp, 2*4*6);
728 else
729 memset(priv->tgtbars, -1, 2*4*6);
730
731 /* Limit IRQ unmasking in irq_mode 2 and 3 */
732 tmp = of_get_property(ofdev->dev.of_node, "irq_mask", &len);
733 if (tmp && (len == 4))
734 priv->do_reset = *tmp;
735 else
736 priv->irq_mask = 0xf;
737
738 /* Optional PCI reset. Force PCI reset on startup */
739 tmp = of_get_property(ofdev->dev.of_node, "reset", &len);
740 if (tmp && (len == 4))
741 priv->do_reset = *tmp;
742 else
743 priv->do_reset = 0;
744
745 /* Find PCI Memory, I/O and Configuration Space Windows */
746 priv->pci_area = ofdev->resource[1].start;
747 priv->pci_area_end = ofdev->resource[1].end+1;
748 priv->pci_io = ofdev->resource[2].start;
749 priv->pci_conf = ofdev->resource[2].start + 0x10000;
750 priv->pci_conf_end = priv->pci_conf + 0x10000;
751 priv->pci_io_va = (unsigned long)ioremap(priv->pci_io, 0x10000);
752 if (!priv->pci_io_va) {
753 err = -EIO;
754 goto err2;
755 }
756
757 printk(KERN_INFO
758 "GRPCI2: MEMORY SPACE [0x%08lx - 0x%08lx]\n"
759 " I/O SPACE [0x%08lx - 0x%08lx]\n"
760 " CONFIG SPACE [0x%08lx - 0x%08lx]\n",
761 priv->pci_area, priv->pci_area_end-1,
762 priv->pci_io, priv->pci_conf-1,
763 priv->pci_conf, priv->pci_conf_end-1);
764
765 /*
766 * I/O Space resources in I/O Window mapped into Virtual Adr Space
767 * We never use low 4KB because some devices seem have problems using
768 * address 0.
769 */
770 memset(&priv->info.io_space, 0, sizeof(struct resource));
771 priv->info.io_space.name = "GRPCI2 PCI I/O Space";
772 priv->info.io_space.start = priv->pci_io_va + 0x1000;
773 priv->info.io_space.end = priv->pci_io_va + 0x10000 - 1;
774 priv->info.io_space.flags = IORESOURCE_IO;
775
776 /*
777 * GRPCI2 has no prefetchable memory, map everything as
778 * non-prefetchable memory
779 */
780 memset(&priv->info.mem_space, 0, sizeof(struct resource));
781 priv->info.mem_space.name = "GRPCI2 PCI MEM Space";
782 priv->info.mem_space.start = priv->pci_area;
783 priv->info.mem_space.end = priv->pci_area_end - 1;
784 priv->info.mem_space.flags = IORESOURCE_MEM;
785
786 if (request_resource(&iomem_resource, &priv->info.mem_space) < 0)
787 goto err3;
788 if (request_resource(&ioport_resource, &priv->info.io_space) < 0)
789 goto err4;
790
791 grpci2_hw_init(priv);
792
793 /*
794 * Get PCI Interrupt to System IRQ mapping and setup IRQ handling
795 * Error IRQ always on PCI INTA.
796 */
797 if (priv->irq_mode < 2) {
798 /* All PCI interrupts are shared using the same system IRQ */
799 leon_update_virq_handling(priv->irq, grpci2_pci_flow_irq,
800 "pcilvl", 0);
801
802 priv->irq_map[0] = grpci2_build_device_irq(1);
803 priv->irq_map[1] = grpci2_build_device_irq(2);
804 priv->irq_map[2] = grpci2_build_device_irq(3);
805 priv->irq_map[3] = grpci2_build_device_irq(4);
806
807 priv->virq_err = grpci2_build_device_irq(5);
808 if (priv->irq_mode & 1)
809 priv->virq_dma = ofdev->archdata.irqs[1];
810 else
811 priv->virq_dma = grpci2_build_device_irq(6);
812
813 /* Enable IRQs on LEON IRQ controller */
814 err = request_irq(priv->irq, grpci2_jump_interrupt, 0,
815 "GRPCI2_JUMP", priv);
816 if (err)
817 printk(KERN_ERR "GRPCI2: ERR IRQ request failed\n");
818 } else {
819 /* All PCI interrupts have an unique IRQ interrupt */
820 for (i = 0; i < 4; i++) {
821 /* Make LEON IRQ layer handle level IRQ by acking */
822 leon_update_virq_handling(ofdev->archdata.irqs[i],
823 handle_fasteoi_irq, "pcilvl",
824 1);
825 priv->irq_map[i] = ofdev->archdata.irqs[i];
826 }
827 priv->virq_err = priv->irq_map[0];
828 if (priv->irq_mode & 1)
829 priv->virq_dma = ofdev->archdata.irqs[4];
830 else
831 priv->virq_dma = priv->irq_map[0];
832
833 /* Unmask all PCI interrupts, request_irq will not do that */
834 REGSTORE(regs->ctrl, REGLOAD(regs->ctrl)|(priv->irq_mask&0xf));
835 }
836
837 /* Setup IRQ handler for non-configuration space access errors */
838 err = request_irq(priv->virq_err, grpci2_err_interrupt, IRQF_SHARED,
839 "GRPCI2_ERR", priv);
840 if (err) {
841 printk(KERN_DEBUG "GRPCI2: ERR VIRQ request failed: %d\n", err);
842 goto err5;
843 }
844
845 /*
846 * Enable Error Interrupts. PCI interrupts are unmasked once request_irq
847 * is called by the PCI Device drivers
848 */
849 REGSTORE(regs->ctrl, REGLOAD(regs->ctrl) | CTRL_EI | CTRL_SI);
850
851 /* Init common layer and scan buses */
852 priv->info.ops = &grpci2_ops;
853 priv->info.map_irq = grpci2_map_irq;
854 leon_pci_init(ofdev, &priv->info);
855
856 return 0;
857
858 err5:
859 release_resource(&priv->info.io_space);
860 err4:
861 release_resource(&priv->info.mem_space);
862 err3:
863 err = -ENOMEM;
864 iounmap((void *)priv->pci_io_va);
865 err2:
866 kfree(priv);
867 err1:
868 of_iounmap(&ofdev->resource[0], regs,
869 resource_size(&ofdev->resource[0]));
870 return err;
871 }
872
873 static struct of_device_id grpci2_of_match[] = {
874 {
875 .name = "GAISLER_GRPCI2",
876 },
877 {
878 .name = "01_07c",
879 },
880 {},
881 };
882
883 static struct platform_driver grpci2_of_driver = {
884 .driver = {
885 .name = "grpci2",
886 .owner = THIS_MODULE,
887 .of_match_table = grpci2_of_match,
888 },
889 .probe = grpci2_of_probe,
890 };
891
892 static int __init grpci2_init(void)
893 {
894 return platform_driver_register(&grpci2_of_driver);
895 }
896
897 subsys_initcall(grpci2_init);
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree