staging: brcm80211: Use proper BRCM_FULLMAC #ifdefs
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / net / mac80211 / agg-rx.c
blob965b272499fd7616e4df039e3c878dda678f5cf9
1 /*
2 * HT handling
4 * Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi>
5 * Copyright 2002-2005, Instant802 Networks, Inc.
6 * Copyright 2005-2006, Devicescape Software, Inc.
7 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
8 * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
9 * Copyright 2007-2010, Intel Corporation
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
16 /**
17 * DOC: RX A-MPDU aggregation
19 * Aggregation on the RX side requires only implementing the
20 * @ampdu_action callback that is invoked to start/stop any
21 * block-ack sessions for RX aggregation.
23 * When RX aggregation is started by the peer, the driver is
24 * notified via @ampdu_action function, with the
25 * %IEEE80211_AMPDU_RX_START action, and may reject the request
26 * in which case a negative response is sent to the peer, if it
27 * accepts it a positive response is sent.
29 * While the session is active, the device/driver are required
30 * to de-aggregate frames and pass them up one by one to mac80211,
31 * which will handle the reorder buffer.
33 * When the aggregation session is stopped again by the peer or
34 * ourselves, the driver's @ampdu_action function will be called
35 * with the action %IEEE80211_AMPDU_RX_STOP. In this case, the
36 * call must not fail.
39 #include <linux/ieee80211.h>
40 #include <linux/slab.h>
41 #include <net/mac80211.h>
42 #include "ieee80211_i.h"
43 #include "driver-ops.h"
45 static void ieee80211_free_tid_rx(struct rcu_head *h)
47 struct tid_ampdu_rx *tid_rx =
48 container_of(h, struct tid_ampdu_rx, rcu_head);
49 int i;
51 for (i = 0; i < tid_rx->buf_size; i++)
52 dev_kfree_skb(tid_rx->reorder_buf[i]);
53 kfree(tid_rx->reorder_buf);
54 kfree(tid_rx->reorder_time);
55 kfree(tid_rx);
58 void ___ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
59 u16 initiator, u16 reason)
61 struct ieee80211_local *local = sta->local;
62 struct tid_ampdu_rx *tid_rx;
64 lockdep_assert_held(&sta->ampdu_mlme.mtx);
66 tid_rx = sta->ampdu_mlme.tid_rx[tid];
68 if (!tid_rx)
69 return;
71 rcu_assign_pointer(sta->ampdu_mlme.tid_rx[tid], NULL);
73 #ifdef CONFIG_MAC80211_HT_DEBUG
74 printk(KERN_DEBUG "Rx BA session stop requested for %pM tid %u\n",
75 sta->sta.addr, tid);
76 #endif /* CONFIG_MAC80211_HT_DEBUG */
78 if (drv_ampdu_action(local, sta->sdata, IEEE80211_AMPDU_RX_STOP,
79 &sta->sta, tid, NULL))
80 printk(KERN_DEBUG "HW problem - can not stop rx "
81 "aggregation for tid %d\n", tid);
83 /* check if this is a self generated aggregation halt */
84 if (initiator == WLAN_BACK_RECIPIENT)
85 ieee80211_send_delba(sta->sdata, sta->sta.addr,
86 tid, 0, reason);
88 del_timer_sync(&tid_rx->session_timer);
90 call_rcu(&tid_rx->rcu_head, ieee80211_free_tid_rx);
93 void __ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
94 u16 initiator, u16 reason)
96 mutex_lock(&sta->ampdu_mlme.mtx);
97 ___ieee80211_stop_rx_ba_session(sta, tid, initiator, reason);
98 mutex_unlock(&sta->ampdu_mlme.mtx);
102 * After accepting the AddBA Request we activated a timer,
103 * resetting it after each frame that arrives from the originator.
105 static void sta_rx_agg_session_timer_expired(unsigned long data)
107 /* not an elegant detour, but there is no choice as the timer passes
108 * only one argument, and various sta_info are needed here, so init
109 * flow in sta_info_create gives the TID as data, while the timer_to_id
110 * array gives the sta through container_of */
111 u8 *ptid = (u8 *)data;
112 u8 *timer_to_id = ptid - *ptid;
113 struct sta_info *sta = container_of(timer_to_id, struct sta_info,
114 timer_to_tid[0]);
116 #ifdef CONFIG_MAC80211_HT_DEBUG
117 printk(KERN_DEBUG "rx session timer expired on tid %d\n", (u16)*ptid);
118 #endif
119 set_bit(*ptid, sta->ampdu_mlme.tid_rx_timer_expired);
120 ieee80211_queue_work(&sta->local->hw, &sta->ampdu_mlme.work);
123 static void ieee80211_send_addba_resp(struct ieee80211_sub_if_data *sdata, u8 *da, u16 tid,
124 u8 dialog_token, u16 status, u16 policy,
125 u16 buf_size, u16 timeout)
127 struct ieee80211_local *local = sdata->local;
128 struct sk_buff *skb;
129 struct ieee80211_mgmt *mgmt;
130 u16 capab;
132 skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom);
134 if (!skb) {
135 printk(KERN_DEBUG "%s: failed to allocate buffer "
136 "for addba resp frame\n", sdata->name);
137 return;
140 skb_reserve(skb, local->hw.extra_tx_headroom);
141 mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
142 memset(mgmt, 0, 24);
143 memcpy(mgmt->da, da, ETH_ALEN);
144 memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
145 if (sdata->vif.type == NL80211_IFTYPE_AP ||
146 sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
147 memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
148 else if (sdata->vif.type == NL80211_IFTYPE_STATION)
149 memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
151 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
152 IEEE80211_STYPE_ACTION);
154 skb_put(skb, 1 + sizeof(mgmt->u.action.u.addba_resp));
155 mgmt->u.action.category = WLAN_CATEGORY_BACK;
156 mgmt->u.action.u.addba_resp.action_code = WLAN_ACTION_ADDBA_RESP;
157 mgmt->u.action.u.addba_resp.dialog_token = dialog_token;
159 capab = (u16)(policy << 1); /* bit 1 aggregation policy */
160 capab |= (u16)(tid << 2); /* bit 5:2 TID number */
161 capab |= (u16)(buf_size << 6); /* bit 15:6 max size of aggregation */
163 mgmt->u.action.u.addba_resp.capab = cpu_to_le16(capab);
164 mgmt->u.action.u.addba_resp.timeout = cpu_to_le16(timeout);
165 mgmt->u.action.u.addba_resp.status = cpu_to_le16(status);
167 ieee80211_tx_skb(sdata, skb);
170 void ieee80211_process_addba_request(struct ieee80211_local *local,
171 struct sta_info *sta,
172 struct ieee80211_mgmt *mgmt,
173 size_t len)
175 struct ieee80211_hw *hw = &local->hw;
176 struct ieee80211_conf *conf = &hw->conf;
177 struct tid_ampdu_rx *tid_agg_rx;
178 u16 capab, tid, timeout, ba_policy, buf_size, start_seq_num, status;
179 u8 dialog_token;
180 int ret = -EOPNOTSUPP;
182 /* extract session parameters from addba request frame */
183 dialog_token = mgmt->u.action.u.addba_req.dialog_token;
184 timeout = le16_to_cpu(mgmt->u.action.u.addba_req.timeout);
185 start_seq_num =
186 le16_to_cpu(mgmt->u.action.u.addba_req.start_seq_num) >> 4;
188 capab = le16_to_cpu(mgmt->u.action.u.addba_req.capab);
189 ba_policy = (capab & IEEE80211_ADDBA_PARAM_POLICY_MASK) >> 1;
190 tid = (capab & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2;
191 buf_size = (capab & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6;
193 status = WLAN_STATUS_REQUEST_DECLINED;
195 if (test_sta_flags(sta, WLAN_STA_BLOCK_BA)) {
196 #ifdef CONFIG_MAC80211_HT_DEBUG
197 printk(KERN_DEBUG "Suspend in progress. "
198 "Denying ADDBA request\n");
199 #endif
200 goto end_no_lock;
203 /* sanity check for incoming parameters:
204 * check if configuration can support the BA policy
205 * and if buffer size does not exceeds max value */
206 /* XXX: check own ht delayed BA capability?? */
207 if (((ba_policy != 1) &&
208 (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_DELAY_BA))) ||
209 (buf_size > IEEE80211_MAX_AMPDU_BUF)) {
210 status = WLAN_STATUS_INVALID_QOS_PARAM;
211 #ifdef CONFIG_MAC80211_HT_DEBUG
212 if (net_ratelimit())
213 printk(KERN_DEBUG "AddBA Req with bad params from "
214 "%pM on tid %u. policy %d, buffer size %d\n",
215 mgmt->sa, tid, ba_policy,
216 buf_size);
217 #endif /* CONFIG_MAC80211_HT_DEBUG */
218 goto end_no_lock;
220 /* determine default buffer size */
221 if (buf_size == 0) {
222 struct ieee80211_supported_band *sband;
224 sband = local->hw.wiphy->bands[conf->channel->band];
225 buf_size = IEEE80211_MIN_AMPDU_BUF;
226 buf_size = buf_size << sband->ht_cap.ampdu_factor;
230 /* examine state machine */
231 mutex_lock(&sta->ampdu_mlme.mtx);
233 if (sta->ampdu_mlme.tid_rx[tid]) {
234 #ifdef CONFIG_MAC80211_HT_DEBUG
235 if (net_ratelimit())
236 printk(KERN_DEBUG "unexpected AddBA Req from "
237 "%pM on tid %u\n",
238 mgmt->sa, tid);
239 #endif /* CONFIG_MAC80211_HT_DEBUG */
240 goto end;
243 /* prepare A-MPDU MLME for Rx aggregation */
244 tid_agg_rx = kmalloc(sizeof(struct tid_ampdu_rx), GFP_ATOMIC);
245 if (!tid_agg_rx) {
246 #ifdef CONFIG_MAC80211_HT_DEBUG
247 if (net_ratelimit())
248 printk(KERN_ERR "allocate rx mlme to tid %d failed\n",
249 tid);
250 #endif
251 goto end;
254 /* rx timer */
255 tid_agg_rx->session_timer.function = sta_rx_agg_session_timer_expired;
256 tid_agg_rx->session_timer.data = (unsigned long)&sta->timer_to_tid[tid];
257 init_timer(&tid_agg_rx->session_timer);
259 /* prepare reordering buffer */
260 tid_agg_rx->reorder_buf =
261 kcalloc(buf_size, sizeof(struct sk_buff *), GFP_ATOMIC);
262 tid_agg_rx->reorder_time =
263 kcalloc(buf_size, sizeof(unsigned long), GFP_ATOMIC);
264 if (!tid_agg_rx->reorder_buf || !tid_agg_rx->reorder_time) {
265 #ifdef CONFIG_MAC80211_HT_DEBUG
266 if (net_ratelimit())
267 printk(KERN_ERR "can not allocate reordering buffer "
268 "to tid %d\n", tid);
269 #endif
270 kfree(tid_agg_rx->reorder_buf);
271 kfree(tid_agg_rx->reorder_time);
272 kfree(tid_agg_rx);
273 goto end;
276 ret = drv_ampdu_action(local, sta->sdata, IEEE80211_AMPDU_RX_START,
277 &sta->sta, tid, &start_seq_num);
278 #ifdef CONFIG_MAC80211_HT_DEBUG
279 printk(KERN_DEBUG "Rx A-MPDU request on tid %d result %d\n", tid, ret);
280 #endif /* CONFIG_MAC80211_HT_DEBUG */
282 if (ret) {
283 kfree(tid_agg_rx->reorder_buf);
284 kfree(tid_agg_rx->reorder_time);
285 kfree(tid_agg_rx);
286 goto end;
289 /* update data */
290 tid_agg_rx->dialog_token = dialog_token;
291 tid_agg_rx->ssn = start_seq_num;
292 tid_agg_rx->head_seq_num = start_seq_num;
293 tid_agg_rx->buf_size = buf_size;
294 tid_agg_rx->timeout = timeout;
295 tid_agg_rx->stored_mpdu_num = 0;
296 status = WLAN_STATUS_SUCCESS;
298 /* activate it for RX */
299 rcu_assign_pointer(sta->ampdu_mlme.tid_rx[tid], tid_agg_rx);
301 if (timeout)
302 mod_timer(&tid_agg_rx->session_timer, TU_TO_EXP_TIME(timeout));
304 end:
305 mutex_unlock(&sta->ampdu_mlme.mtx);
307 end_no_lock:
308 ieee80211_send_addba_resp(sta->sdata, sta->sta.addr, tid,
309 dialog_token, status, 1, buf_size, timeout);