NFSv4.1: turn off pNFS on ds connection failure
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / arm / mach-orion5x / wrt350n-v2-setup.c
bloba5989b7eb53ee36526d0bef1f26f680deb044e13
1 /*
2 * arch/arm/mach-orion5x/wrt350n-v2-setup.c
4 * This file is licensed under the terms of the GNU General Public
5 * License version 2. This program is licensed "as is" without any
6 * warranty of any kind, whether express or implied.
7 */
9 #include <linux/kernel.h>
10 #include <linux/init.h>
11 #include <linux/platform_device.h>
12 #include <linux/pci.h>
13 #include <linux/irq.h>
14 #include <linux/delay.h>
15 #include <linux/mtd/physmap.h>
16 #include <linux/mv643xx_eth.h>
17 #include <linux/ethtool.h>
18 #include <linux/leds.h>
19 #include <linux/gpio_keys.h>
20 #include <linux/input.h>
21 #include <net/dsa.h>
22 #include <asm/mach-types.h>
23 #include <asm/gpio.h>
24 #include <asm/mach/arch.h>
25 #include <asm/mach/pci.h>
26 #include <mach/orion5x.h>
27 #include "common.h"
28 #include "mpp.h"
31 * LEDs attached to GPIO
33 static struct gpio_led wrt350n_v2_led_pins[] = {
35 .name = "wrt350nv2:green:power",
36 .gpio = 0,
37 .active_low = 1,
38 }, {
39 .name = "wrt350nv2:green:security",
40 .gpio = 1,
41 .active_low = 1,
42 }, {
43 .name = "wrt350nv2:orange:power",
44 .gpio = 5,
45 .active_low = 1,
46 }, {
47 .name = "wrt350nv2:green:usb",
48 .gpio = 6,
49 .active_low = 1,
50 }, {
51 .name = "wrt350nv2:green:wireless",
52 .gpio = 7,
53 .active_low = 1,
57 static struct gpio_led_platform_data wrt350n_v2_led_data = {
58 .leds = wrt350n_v2_led_pins,
59 .num_leds = ARRAY_SIZE(wrt350n_v2_led_pins),
62 static struct platform_device wrt350n_v2_leds = {
63 .name = "leds-gpio",
64 .id = -1,
65 .dev = {
66 .platform_data = &wrt350n_v2_led_data,
71 * Buttons attached to GPIO
73 static struct gpio_keys_button wrt350n_v2_buttons[] = {
75 .code = KEY_RESTART,
76 .gpio = 3,
77 .desc = "Reset Button",
78 .active_low = 1,
79 }, {
80 .code = KEY_WPS_BUTTON,
81 .gpio = 2,
82 .desc = "WPS Button",
83 .active_low = 1,
87 static struct gpio_keys_platform_data wrt350n_v2_button_data = {
88 .buttons = wrt350n_v2_buttons,
89 .nbuttons = ARRAY_SIZE(wrt350n_v2_buttons),
92 static struct platform_device wrt350n_v2_button_device = {
93 .name = "gpio-keys",
94 .id = -1,
95 .num_resources = 0,
96 .dev = {
97 .platform_data = &wrt350n_v2_button_data,
102 * General setup
104 static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = {
105 { 0, MPP_GPIO }, /* Power LED green (0=on) */
106 { 1, MPP_GPIO }, /* Security LED (0=on) */
107 { 2, MPP_GPIO }, /* Internal Button (0=on) */
108 { 3, MPP_GPIO }, /* Reset Button (0=on) */
109 { 4, MPP_GPIO }, /* PCI int */
110 { 5, MPP_GPIO }, /* Power LED orange (0=on) */
111 { 6, MPP_GPIO }, /* USB LED (0=on) */
112 { 7, MPP_GPIO }, /* Wireless LED (0=on) */
113 { 8, MPP_UNUSED }, /* ??? */
114 { 9, MPP_GIGE }, /* GE_RXERR */
115 { 10, MPP_UNUSED }, /* ??? */
116 { 11, MPP_UNUSED }, /* ??? */
117 { 12, MPP_GIGE }, /* GE_TXD[4] */
118 { 13, MPP_GIGE }, /* GE_TXD[5] */
119 { 14, MPP_GIGE }, /* GE_TXD[6] */
120 { 15, MPP_GIGE }, /* GE_TXD[7] */
121 { 16, MPP_GIGE }, /* GE_RXD[4] */
122 { 17, MPP_GIGE }, /* GE_RXD[5] */
123 { 18, MPP_GIGE }, /* GE_RXD[6] */
124 { 19, MPP_GIGE }, /* GE_RXD[7] */
125 { -1 },
129 * 8M NOR flash Device bus boot chip select
131 #define WRT350N_V2_NOR_BOOT_BASE 0xf4000000
132 #define WRT350N_V2_NOR_BOOT_SIZE SZ_8M
134 static struct mtd_partition wrt350n_v2_nor_flash_partitions[] = {
136 .name = "kernel",
137 .offset = 0x00000000,
138 .size = 0x00760000,
139 }, {
140 .name = "rootfs",
141 .offset = 0x001a0000,
142 .size = 0x005c0000,
143 }, {
144 .name = "lang",
145 .offset = 0x00760000,
146 .size = 0x00040000,
147 }, {
148 .name = "nvram",
149 .offset = 0x007a0000,
150 .size = 0x00020000,
151 }, {
152 .name = "u-boot",
153 .offset = 0x007c0000,
154 .size = 0x00040000,
158 static struct physmap_flash_data wrt350n_v2_nor_flash_data = {
159 .width = 1,
160 .parts = wrt350n_v2_nor_flash_partitions,
161 .nr_parts = ARRAY_SIZE(wrt350n_v2_nor_flash_partitions),
164 static struct resource wrt350n_v2_nor_flash_resource = {
165 .flags = IORESOURCE_MEM,
166 .start = WRT350N_V2_NOR_BOOT_BASE,
167 .end = WRT350N_V2_NOR_BOOT_BASE + WRT350N_V2_NOR_BOOT_SIZE - 1,
170 static struct platform_device wrt350n_v2_nor_flash = {
171 .name = "physmap-flash",
172 .id = 0,
173 .dev = {
174 .platform_data = &wrt350n_v2_nor_flash_data,
176 .num_resources = 1,
177 .resource = &wrt350n_v2_nor_flash_resource,
180 static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
181 .phy_addr = MV643XX_ETH_PHY_NONE,
182 .speed = SPEED_1000,
183 .duplex = DUPLEX_FULL,
186 static struct dsa_chip_data wrt350n_v2_switch_chip_data = {
187 .port_names[0] = "lan2",
188 .port_names[1] = "lan1",
189 .port_names[2] = "wan",
190 .port_names[3] = "cpu",
191 .port_names[5] = "lan3",
192 .port_names[7] = "lan4",
195 static struct dsa_platform_data wrt350n_v2_switch_plat_data = {
196 .nr_chips = 1,
197 .chip = &wrt350n_v2_switch_chip_data,
200 static void __init wrt350n_v2_init(void)
203 * Setup basic Orion functions. Need to be called early.
205 orion5x_init();
207 orion5x_mpp_conf(wrt350n_v2_mpp_modes);
210 * Configure peripherals.
212 orion5x_ehci0_init();
213 orion5x_eth_init(&wrt350n_v2_eth_data);
214 orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ);
215 orion5x_uart0_init();
217 orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
218 WRT350N_V2_NOR_BOOT_SIZE);
219 platform_device_register(&wrt350n_v2_nor_flash);
220 platform_device_register(&wrt350n_v2_leds);
221 platform_device_register(&wrt350n_v2_button_device);
224 static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
226 int irq;
229 * Check for devices with hard-wired IRQs.
231 irq = orion5x_pci_map_irq(dev, slot, pin);
232 if (irq != -1)
233 return irq;
236 * Mini-PCI slot.
238 if (slot == 7)
239 return gpio_to_irq(4);
241 return -1;
244 static struct hw_pci wrt350n_v2_pci __initdata = {
245 .nr_controllers = 2,
246 .swizzle = pci_std_swizzle,
247 .setup = orion5x_pci_sys_setup,
248 .scan = orion5x_pci_sys_scan_bus,
249 .map_irq = wrt350n_v2_pci_map_irq,
252 static int __init wrt350n_v2_pci_init(void)
254 if (machine_is_wrt350n_v2())
255 pci_common_init(&wrt350n_v2_pci);
257 return 0;
259 subsys_initcall(wrt350n_v2_pci_init);
261 MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
262 /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
263 .boot_params = 0x00000100,
264 .init_machine = wrt350n_v2_init,
265 .map_io = orion5x_map_io,
266 .init_irq = orion5x_init_irq,
267 .timer = &orion5x_timer,
268 .fixup = tag_fixup_mem32,
269 MACHINE_END