drivers/usb/host/ohci-au1xxx.c

   1 /*
   2  * OHCI HCD (Host Controller Driver) for USB.
   3  *
   4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
   5  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
   6  * (C) Copyright 2002 Hewlett-Packard Company
   7  *
   8  * Bus Glue for AMD Alchemy Au1xxx
   9  *
  10  * Written by Christopher Hoover <ch@hpl.hp.com>
  11  * Based on fragments of previous driver by Russell King et al.
  12  *
  13  * Modified for LH7A404 from ohci-sa1111.c
  14  *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
  15  * Modified for AMD Alchemy Au1xxx
  16  *  by Matt Porter <mporter@kernel.crashing.org>
  17  *
  18  * This file is licenced under the GPL.
  19  */
  20
  21 #include <linux/platform_device.h>
  22 #include <linux/signal.h>
  23
  24 #include <asm/mach-au1x00/au1000.h>
  25
  26 #ifndef CONFIG_SOC_AU1200
  27
  28 #define USBH_ENABLE_BE (1<<0)
  29 #define USBH_ENABLE_C  (1<<1)
  30 #define USBH_ENABLE_E  (1<<2)
  31 #define USBH_ENABLE_CE (1<<3)
  32 #define USBH_ENABLE_RD (1<<4)
  33
  34 #ifdef __LITTLE_ENDIAN
  35 #define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C)
  36 #elif __BIG_ENDIAN
  37 #define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C | \
  38                           USBH_ENABLE_BE)
  39 #else
  40 #error not byte order defined
  41 #endif
  42
  43 #else   /* Au1200 */
  44
  45 #define USB_HOST_CONFIG    (USB_MSR_BASE + USB_MSR_MCFG)
  46 #define USB_MCFG_PFEN     (1<<31)
  47 #define USB_MCFG_RDCOMB   (1<<30)
  48 #define USB_MCFG_SSDEN    (1<<23)
  49 #define USB_MCFG_OHCCLKEN (1<<16)
  50 #ifdef CONFIG_DMA_COHERENT
  51 #define USB_MCFG_UCAM     (1<<7)
  52 #else
  53 #define USB_MCFG_UCAM     (0)
  54 #endif
  55 #define USB_MCFG_OBMEN    (1<<1)
  56 #define USB_MCFG_OMEMEN   (1<<0)
  57
  58 #define USBH_ENABLE_CE    USB_MCFG_OHCCLKEN
  59
  60 #define USBH_ENABLE_INIT  (USB_MCFG_PFEN  | USB_MCFG_RDCOMB     |       \
  61                            USBH_ENABLE_CE | USB_MCFG_SSDEN      |       \
  62                            USB_MCFG_UCAM  |                             \
  63                            USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
  64
  65 #define USBH_DISABLE      (USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
  66
  67 #endif  /* Au1200 */
  68
  69 extern int usb_disabled(void);
  70
  71 static void au1xxx_start_ohc(void)
  72 {
  73         /* enable host controller */
  74 #ifndef CONFIG_SOC_AU1200
  75         au_writel(USBH_ENABLE_CE, USB_HOST_CONFIG);
  76         au_sync();
  77         udelay(1000);
  78
  79         au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG);
  80         au_sync();
  81         udelay(1000);
  82
  83         /* wait for reset complete (read register twice; see au1500 errata) */
  84         while (au_readl(USB_HOST_CONFIG),
  85                 !(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD))
  86                 udelay(1000);
  87
  88 #else   /* Au1200 */
  89         au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_CE, USB_HOST_CONFIG);
  90         au_sync();
  91         udelay(1000);
  92
  93         au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG);
  94         au_sync();
  95         udelay(2000);
  96 #endif  /* Au1200 */
  97 }
  98
  99 static void au1xxx_stop_ohc(void)
 100 {
 101 #ifdef CONFIG_SOC_AU1200
 102         /* Disable mem */
 103         au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_DISABLE, USB_HOST_CONFIG);
 104         au_sync();
 105         udelay(1000);
 106 #endif
 107         /* Disable clock */
 108         au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
 109         au_sync();
 110 }
 111
 112 static int __devinit ohci_au1xxx_start(struct usb_hcd *hcd)
 113 {
 114         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 115         int ret;
 116
 117         ohci_dbg(ohci, "ohci_au1xxx_start, ohci:%p", ohci);
 118
 119         if ((ret = ohci_init(ohci)) < 0)
 120                 return ret;
 121
 122         if ((ret = ohci_run(ohci)) < 0) {
 123                 err ("can't start %s", hcd->self.bus_name);
 124                 ohci_stop(hcd);
 125                 return ret;
 126         }
 127
 128         return 0;
 129 }
 130
 131 static const struct hc_driver ohci_au1xxx_hc_driver = {
 132         .description =          hcd_name,
 133         .product_desc =         "Au1xxx OHCI",
 134         .hcd_priv_size =        sizeof(struct ohci_hcd),
 135
 136         /*
 137          * generic hardware linkage
 138          */
 139         .irq =                  ohci_irq,
 140         .flags =                HCD_USB11 | HCD_MEMORY,
 141
 142         /*
 143          * basic lifecycle operations
 144          */
 145         .start =                ohci_au1xxx_start,
 146         .stop =                 ohci_stop,
 147         .shutdown =             ohci_shutdown,
 148
 149         /*
 150          * managing i/o requests and associated device resources
 151          */
 152         .urb_enqueue =          ohci_urb_enqueue,
 153         .urb_dequeue =          ohci_urb_dequeue,
 154         .endpoint_disable =     ohci_endpoint_disable,
 155
 156         /*
 157          * scheduling support
 158          */
 159         .get_frame_number =     ohci_get_frame,
 160
 161         /*
 162          * root hub support
 163          */
 164         .hub_status_data =      ohci_hub_status_data,
 165         .hub_control =          ohci_hub_control,
 166 #ifdef  CONFIG_PM
 167         .bus_suspend =          ohci_bus_suspend,
 168         .bus_resume =           ohci_bus_resume,
 169 #endif
 170         .start_port_reset =     ohci_start_port_reset,
 171 };
 172
 173 static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 174 {
 175         int ret;
 176         struct usb_hcd *hcd;
 177
 178         if (usb_disabled())
 179                 return -ENODEV;
 180
 181 #if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT)
 182         /* Au1200 AB USB does not support coherent memory */
 183         if (!(read_c0_prid() & 0xff)) {
 184                 printk(KERN_INFO "%s: this is chip revision AB !!\n",
 185                         pdev->name);
 186                 printk(KERN_INFO "%s: update your board or re-configure "
 187                                  "the kernel\n", pdev->name);
 188                 return -ENODEV;
 189         }
 190 #endif
 191
 192         if (pdev->resource[1].flags != IORESOURCE_IRQ) {
 193                 pr_debug("resource[1] is not IORESOURCE_IRQ\n");
 194                 return -ENOMEM;
 195         }
 196
 197         hcd = usb_create_hcd(&ohci_au1xxx_hc_driver, &pdev->dev, "au1xxx");
 198         if (!hcd)
 199                 return -ENOMEM;
 200
 201         hcd->rsrc_start = pdev->resource[0].start;
 202         hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
 203
 204         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 205                 pr_debug("request_mem_region failed\n");
 206                 ret = -EBUSY;
 207                 goto err1;
 208         }
 209
 210         hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 211         if (!hcd->regs) {
 212                 pr_debug("ioremap failed\n");
 213                 ret = -ENOMEM;
 214                 goto err2;
 215         }
 216
 217         au1xxx_start_ohc();
 218         ohci_hcd_init(hcd_to_ohci(hcd));
 219
 220         ret = usb_add_hcd(hcd, pdev->resource[1].start,
 221                           IRQF_DISABLED | IRQF_SHARED);
 222         if (ret == 0) {
 223                 platform_set_drvdata(pdev, hcd);
 224                 return ret;
 225         }
 226
 227         au1xxx_stop_ohc();
 228         iounmap(hcd->regs);
 229 err2:
 230         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 231 err1:
 232         usb_put_hcd(hcd);
 233         return ret;
 234 }
 235
 236 static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
 237 {
 238         struct usb_hcd *hcd = platform_get_drvdata(pdev);
 239
 240         usb_remove_hcd(hcd);
 241         au1xxx_stop_ohc();
 242         iounmap(hcd->regs);
 243         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 244         usb_put_hcd(hcd);
 245         platform_set_drvdata(pdev, NULL);
 246
 247         return 0;
 248 }
 249
 250 #ifdef CONFIG_PM
 251 static int ohci_hcd_au1xxx_drv_suspend(struct device *dev)
 252 {
 253         struct usb_hcd *hcd = dev_get_drvdata(dev);
 254         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 255         unsigned long flags;
 256         int rc;
 257
 258         rc = 0;
 259
 260         /* Root hub was already suspended. Disable irq emission and
 261          * mark HW unaccessible, bail out if RH has been resumed. Use
 262          * the spinlock to properly synchronize with possible pending
 263          * RH suspend or resume activity.
 264          *
 265          * This is still racy as hcd->state is manipulated outside of
 266          * any locks =P But that will be a different fix.
 267          */
 268         spin_lock_irqsave(&ohci->lock, flags);
 269         if (hcd->state != HC_STATE_SUSPENDED) {
 270                 rc = -EINVAL;
 271                 goto bail;
 272         }
 273         ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
 274         (void)ohci_readl(ohci, &ohci->regs->intrdisable);
 275
 276         clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 277
 278         au1xxx_stop_ohc();
 279 bail:
 280         spin_unlock_irqrestore(&ohci->lock, flags);
 281
 282         return rc;
 283 }
 284
 285 static int ohci_hcd_au1xxx_drv_resume(struct device *dev)
 286 {
 287         struct usb_hcd *hcd = dev_get_drvdata(dev);
 288
 289         au1xxx_start_ohc();
 290
 291         set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 292         ohci_finish_controller_resume(hcd);
 293
 294         return 0;
 295 }
 296
 297 static struct dev_pm_ops au1xxx_ohci_pmops = {
 298         .suspend        = ohci_hcd_au1xxx_drv_suspend,
 299         .resume         = ohci_hcd_au1xxx_drv_resume,
 300 };
 301
 302 #define AU1XXX_OHCI_PMOPS &au1xxx_ohci_pmops
 303
 304 #else
 305 #define AU1XXX_OHCI_PMOPS NULL
 306 #endif
 307
 308 static struct platform_driver ohci_hcd_au1xxx_driver = {
 309         .probe          = ohci_hcd_au1xxx_drv_probe,
 310         .remove         = ohci_hcd_au1xxx_drv_remove,
 311         .shutdown       = usb_hcd_platform_shutdown,
 312         .driver         = {
 313                 .name   = "au1xxx-ohci",
 314                 .owner  = THIS_MODULE,
 315                 .pm     = AU1XXX_OHCI_PMOPS,
 316         },
 317 };
 318
 319 MODULE_ALIAS("platform:au1xxx-ohci");