?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
fix radeonfb regression with Xpress 200m 5955
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / pci / probe.c
blobc5ca3134513a6e848461c2546604c293d4ba2e51
1 /*
2 * probe.c - PCI detection and setup code
3 */
4
5 #include <linux/kernel.h>
6 #include <linux/delay.h>
7 #include <linux/init.h>
8 #include <linux/pci.h>
9 #include <linux/slab.h>
10 #include <linux/module.h>
11 #include <linux/cpumask.h>
12 #include "pci.h"
13
14 #define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */
15 #define CARDBUS_RESERVE_BUSNR 3
16 #define PCI_CFG_SPACE_SIZE 256
17 #define PCI_CFG_SPACE_EXP_SIZE 4096
18
19 /* Ugh. Need to stop exporting this to modules. */
20 LIST_HEAD(pci_root_buses);
21 EXPORT_SYMBOL(pci_root_buses);
22
23 LIST_HEAD(pci_devices);
24
25 /*
26 * Some device drivers need know if pci is initiated.
27 * Basically, we think pci is not initiated when there
28 * is no device in list of pci_devices.
29 */
30 int no_pci_devices(void)
31 {
32 return list_empty(&pci_devices);
33 }
34
35 EXPORT_SYMBOL(no_pci_devices);
36
37 #ifdef HAVE_PCI_LEGACY
38 /**
39 * pci_create_legacy_files - create legacy I/O port and memory files
40 * @b: bus to create files under
41 *
42 * Some platforms allow access to legacy I/O port and ISA memory space on
43 * a per-bus basis. This routine creates the files and ties them into
44 * their associated read, write and mmap files from pci-sysfs.c
45 */
46 static void pci_create_legacy_files(struct pci_bus *b)
47 {
48 b->legacy_io = kzalloc(sizeof(struct bin_attribute) * 2,
49 GFP_ATOMIC);
50 if (b->legacy_io) {
51 b->legacy_io->attr.name = "legacy_io";
52 b->legacy_io->size = 0xffff;
53 b->legacy_io->attr.mode = S_IRUSR | S_IWUSR;
54 b->legacy_io->read = pci_read_legacy_io;
55 b->legacy_io->write = pci_write_legacy_io;
56 class_device_create_bin_file(&b->class_dev, b->legacy_io);
57
58 /* Allocated above after the legacy_io struct */
59 b->legacy_mem = b->legacy_io + 1;
60 b->legacy_mem->attr.name = "legacy_mem";
61 b->legacy_mem->size = 1024*1024;
62 b->legacy_mem->attr.mode = S_IRUSR | S_IWUSR;
63 b->legacy_mem->mmap = pci_mmap_legacy_mem;
64 class_device_create_bin_file(&b->class_dev, b->legacy_mem);
65 }
66 }
67
68 void pci_remove_legacy_files(struct pci_bus *b)
69 {
70 if (b->legacy_io) {
71 class_device_remove_bin_file(&b->class_dev, b->legacy_io);
72 class_device_remove_bin_file(&b->class_dev, b->legacy_mem);
73 kfree(b->legacy_io); /* both are allocated here */
74 }
75 }
76 #else /* !HAVE_PCI_LEGACY */
77 static inline void pci_create_legacy_files(struct pci_bus *bus) { return; }
78 void pci_remove_legacy_files(struct pci_bus *bus) { return; }
79 #endif /* HAVE_PCI_LEGACY */
80
81 /*
82 * PCI Bus Class Devices
83 */
84 static ssize_t pci_bus_show_cpuaffinity(struct class_device *class_dev,
85 char *buf)
86 {
87 int ret;
88 cpumask_t cpumask;
89
90 cpumask = pcibus_to_cpumask(to_pci_bus(class_dev));
91 ret = cpumask_scnprintf(buf, PAGE_SIZE, cpumask);
92 if (ret < PAGE_SIZE)
93 buf[ret++] = '\n';
94 return ret;
95 }
96 CLASS_DEVICE_ATTR(cpuaffinity, S_IRUGO, pci_bus_show_cpuaffinity, NULL);
97
98 /*
99 * PCI Bus Class
100 */
101 static void release_pcibus_dev(struct class_device *class_dev)
102 {
103 struct pci_bus *pci_bus = to_pci_bus(class_dev);
104
105 if (pci_bus->bridge)
106 put_device(pci_bus->bridge);
107 kfree(pci_bus);
108 }
109
110 static struct class pcibus_class = {
111 .name = "pci_bus",
112 .release = &release_pcibus_dev,
113 };
114
115 static int __init pcibus_class_init(void)
116 {
117 return class_register(&pcibus_class);
118 }
119 postcore_initcall(pcibus_class_init);
120
121 /*
122 * Translate the low bits of the PCI base
123 * to the resource type
124 */
125 static inline unsigned int pci_calc_resource_flags(unsigned int flags)
126 {
127 if (flags & PCI_BASE_ADDRESS_SPACE_IO)
128 return IORESOURCE_IO;
129
130 if (flags & PCI_BASE_ADDRESS_MEM_PREFETCH)
131 return IORESOURCE_MEM | IORESOURCE_PREFETCH;
132
133 return IORESOURCE_MEM;
134 }
135
136 /*
137 * Find the extent of a PCI decode..
138 */
139 static u32 pci_size(u32 base, u32 maxbase, u32 mask)
140 {
141 u32 size = mask & maxbase; /* Find the significant bits */
142 if (!size)
143 return 0;
144
145 /* Get the lowest of them to find the decode size, and
146 from that the extent. */
147 size = (size & ~(size-1)) - 1;
148
149 /* base == maxbase can be valid only if the BAR has
150 already been programmed with all 1s. */
151 if (base == maxbase && ((base | size) & mask) != mask)
152 return 0;
153
154 return size;
155 }
156
157 static u64 pci_size64(u64 base, u64 maxbase, u64 mask)
158 {
159 u64 size = mask & maxbase; /* Find the significant bits */
160 if (!size)
161 return 0;
162
163 /* Get the lowest of them to find the decode size, and
164 from that the extent. */
165 size = (size & ~(size-1)) - 1;
166
167 /* base == maxbase can be valid only if the BAR has
168 already been programmed with all 1s. */
169 if (base == maxbase && ((base | size) & mask) != mask)
170 return 0;
171
172 return size;
173 }
174
175 static inline int is_64bit_memory(u32 mask)
176 {
177 if ((mask & (PCI_BASE_ADDRESS_SPACE|PCI_BASE_ADDRESS_MEM_TYPE_MASK)) ==
178 (PCI_BASE_ADDRESS_SPACE_MEMORY|PCI_BASE_ADDRESS_MEM_TYPE_64))
179 return 1;
180 return 0;
181 }
182
183 static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
184 {
185 unsigned int pos, reg, next;
186 u32 l, sz;
187 struct resource *res;
188
189 for(pos=0; pos<howmany; pos = next) {
190 u64 l64;
191 u64 sz64;
192 u32 raw_sz;
193
194 next = pos+1;
195 res = &dev->resource[pos];
196 res->name = pci_name(dev);
197 reg = PCI_BASE_ADDRESS_0 + (pos << 2);
198 pci_read_config_dword(dev, reg, &l);
199 pci_write_config_dword(dev, reg, ~0);
200 pci_read_config_dword(dev, reg, &sz);
201 pci_write_config_dword(dev, reg, l);
202 if (!sz || sz == 0xffffffff)
203 continue;
204 if (l == 0xffffffff)
205 l = 0;
206 raw_sz = sz;
207 if ((l & PCI_BASE_ADDRESS_SPACE) ==
208 PCI_BASE_ADDRESS_SPACE_MEMORY) {
209 sz = pci_size(l, sz, (u32)PCI_BASE_ADDRESS_MEM_MASK);
210 /*
211 * For 64bit prefetchable memory sz could be 0, if the
212 * real size is bigger than 4G, so we need to check
213 * szhi for that.
214 */
215 if (!is_64bit_memory(l) && !sz)
216 continue;
217 res->start = l & PCI_BASE_ADDRESS_MEM_MASK;
218 res->flags |= l & ~PCI_BASE_ADDRESS_MEM_MASK;
219 } else {
220 sz = pci_size(l, sz, PCI_BASE_ADDRESS_IO_MASK & 0xffff);
221 if (!sz)
222 continue;
223 res->start = l & PCI_BASE_ADDRESS_IO_MASK;
224 res->flags |= l & ~PCI_BASE_ADDRESS_IO_MASK;
225 }
226 res->end = res->start + (unsigned long) sz;
227 res->flags |= pci_calc_resource_flags(l);
228 if (is_64bit_memory(l)) {
229 u32 szhi, lhi;
230
231 pci_read_config_dword(dev, reg+4, &lhi);
232 pci_write_config_dword(dev, reg+4, ~0);
233 pci_read_config_dword(dev, reg+4, &szhi);
234 pci_write_config_dword(dev, reg+4, lhi);
235 sz64 = ((u64)szhi << 32) | raw_sz;
236 l64 = ((u64)lhi << 32) | l;
237 sz64 = pci_size64(l64, sz64, PCI_BASE_ADDRESS_MEM_MASK);
238 next++;
239 #if BITS_PER_LONG == 64
240 if (!sz64) {
241 res->start = 0;
242 res->end = 0;
243 res->flags = 0;
244 continue;
245 }
246 res->start = l64 & PCI_BASE_ADDRESS_MEM_MASK;
247 res->end = res->start + sz64;
248 #else
249 if (sz64 > 0x100000000ULL) {
250 printk(KERN_ERR "PCI: Unable to handle 64-bit "
251 "BAR for device %s\n", pci_name(dev));
252 res->start = 0;
253 res->flags = 0;
254 } else if (lhi) {
255 /* 64-bit wide address, treat as disabled */
256 pci_write_config_dword(dev, reg,
257 l & ~(u32)PCI_BASE_ADDRESS_MEM_MASK);
258 pci_write_config_dword(dev, reg+4, 0);
259 res->start = 0;
260 res->end = sz;
261 }
262 #endif
263 }
264 }
265 if (rom) {
266 dev->rom_base_reg = rom;
267 res = &dev->resource[PCI_ROM_RESOURCE];
268 res->name = pci_name(dev);
269 pci_read_config_dword(dev, rom, &l);
270 pci_write_config_dword(dev, rom, ~PCI_ROM_ADDRESS_ENABLE);
271 pci_read_config_dword(dev, rom, &sz);
272 pci_write_config_dword(dev, rom, l);
273 if (l == 0xffffffff)
274 l = 0;
275 if (sz && sz != 0xffffffff) {
276 sz = pci_size(l, sz, (u32)PCI_ROM_ADDRESS_MASK);
277 if (sz) {
278 res->flags = (l & IORESOURCE_ROM_ENABLE) |
279 IORESOURCE_MEM | IORESOURCE_PREFETCH |
280 IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
281 res->start = l & PCI_ROM_ADDRESS_MASK;
282 res->end = res->start + (unsigned long) sz;
283 }
284 }
285 }
286 }
287
288 void pci_read_bridge_bases(struct pci_bus *child)
289 {
290 struct pci_dev *dev = child->self;
291 u8 io_base_lo, io_limit_lo;
292 u16 mem_base_lo, mem_limit_lo;
293 unsigned long base, limit;
294 struct resource *res;
295 int i;
296
297 if (!dev) /* It's a host bus, nothing to read */
298 return;
299
300 if (dev->transparent) {
301 printk(KERN_INFO "PCI: Transparent bridge - %s\n", pci_name(dev));
302 for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++)
303 child->resource[i] = child->parent->resource[i - 3];
304 }
305
306 for(i=0; i<3; i++)
307 child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i];
308
309 res = child->resource[0];
310 pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
311 pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
312 base = (io_base_lo & PCI_IO_RANGE_MASK) << 8;
313 limit = (io_limit_lo & PCI_IO_RANGE_MASK) << 8;
314
315 if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
316 u16 io_base_hi, io_limit_hi;
317 pci_read_config_word(dev, PCI_IO_BASE_UPPER16, &io_base_hi);
318 pci_read_config_word(dev, PCI_IO_LIMIT_UPPER16, &io_limit_hi);
319 base |= (io_base_hi << 16);
320 limit |= (io_limit_hi << 16);
321 }
322
323 if (base <= limit) {
324 res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO;
325 if (!res->start)
326 res->start = base;
327 if (!res->end)
328 res->end = limit + 0xfff;
329 }
330
331 res = child->resource[1];
332 pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo);
333 pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo);
334 base = (mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
335 limit = (mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16;
336 if (base <= limit) {
337 res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
338 res->start = base;
339 res->end = limit + 0xfffff;
340 }
341
342 res = child->resource[2];
343 pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
344 pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo);
345 base = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
346 limit = (mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
347
348 if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
349 u32 mem_base_hi, mem_limit_hi;
350 pci_read_config_dword(dev, PCI_PREF_BASE_UPPER32, &mem_base_hi);
351 pci_read_config_dword(dev, PCI_PREF_LIMIT_UPPER32, &mem_limit_hi);
352
353 /*
354 * Some bridges set the base > limit by default, and some
355 * (broken) BIOSes do not initialize them. If we find
356 * this, just assume they are not being used.
357 */
358 if (mem_base_hi <= mem_limit_hi) {
359 #if BITS_PER_LONG == 64
360 base |= ((long) mem_base_hi) << 32;
361 limit |= ((long) mem_limit_hi) << 32;
362 #else
363 if (mem_base_hi || mem_limit_hi) {
364 printk(KERN_ERR "PCI: Unable to handle 64-bit address space for bridge %s\n", pci_name(dev));
365 return;
366 }
367 #endif
368 }
369 }
370 if (base <= limit) {
371 res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
372 res->start = base;
373 res->end = limit + 0xfffff;
374 }
375 }
376
377 static struct pci_bus * pci_alloc_bus(void)
378 {
379 struct pci_bus *b;
380
381 b = kzalloc(sizeof(*b), GFP_KERNEL);
382 if (b) {
383 INIT_LIST_HEAD(&b->node);
384 INIT_LIST_HEAD(&b->children);
385 INIT_LIST_HEAD(&b->devices);
386 }
387 return b;
388 }
389
390 static struct pci_bus * __devinit
391 pci_alloc_child_bus(struct pci_bus *parent, struct pci_dev *bridge, int busnr)
392 {
393 struct pci_bus *child;
394 int i;
395 int retval;
396
397 /*
398 * Allocate a new bus, and inherit stuff from the parent..
399 */
400 child = pci_alloc_bus();
401 if (!child)
402 return NULL;
403
404 child->self = bridge;
405 child->parent = parent;
406 child->ops = parent->ops;
407 child->sysdata = parent->sysdata;
408 child->bus_flags = parent->bus_flags;
409 child->bridge = get_device(&bridge->dev);
410
411 child->class_dev.class = &pcibus_class;
412 sprintf(child->class_dev.class_id, "%04x:%02x", pci_domain_nr(child), busnr);
413 retval = class_device_register(&child->class_dev);
414 if (retval)
415 goto error_register;
416 retval = class_device_create_file(&child->class_dev,
417 &class_device_attr_cpuaffinity);
418 if (retval)
419 goto error_file_create;
420
421 /*
422 * Set up the primary, secondary and subordinate
423 * bus numbers.
424 */
425 child->number = child->secondary = busnr;
426 child->primary = parent->secondary;
427 child->subordinate = 0xff;
428
429 /* Set up default resource pointers and names.. */
430 for (i = 0; i < 4; i++) {
431 child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i];
432 child->resource[i]->name = child->name;
433 }
434 bridge->subordinate = child;
435
436 return child;
437
438 error_file_create:
439 class_device_unregister(&child->class_dev);
440 error_register:
441 kfree(child);
442 return NULL;
443 }
444
445 struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr)
446 {
447 struct pci_bus *child;
448
449 child = pci_alloc_child_bus(parent, dev, busnr);
450 if (child) {
451 down_write(&pci_bus_sem);
452 list_add_tail(&child->node, &parent->children);
453 up_write(&pci_bus_sem);
454 }
455 return child;
456 }
457
458 static void pci_fixup_parent_subordinate_busnr(struct pci_bus *child, int max)
459 {
460 struct pci_bus *parent = child->parent;
461
462 /* Attempts to fix that up are really dangerous unless
463 we're going to re-assign all bus numbers. */
464 if (!pcibios_assign_all_busses())
465 return;
466
467 while (parent->parent && parent->subordinate < max) {
468 parent->subordinate = max;
469 pci_write_config_byte(parent->self, PCI_SUBORDINATE_BUS, max);
470 parent = parent->parent;
471 }
472 }
473
474 unsigned int pci_scan_child_bus(struct pci_bus *bus);
475
476 /*
477 * If it's a bridge, configure it and scan the bus behind it.
478 * For CardBus bridges, we don't scan behind as the devices will
479 * be handled by the bridge driver itself.
480 *
481 * We need to process bridges in two passes -- first we scan those
482 * already configured by the BIOS and after we are done with all of
483 * them, we proceed to assigning numbers to the remaining buses in
484 * order to avoid overlaps between old and new bus numbers.
485 */
486 int pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass)
487 {
488 struct pci_bus *child;
489 int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
490 u32 buses, i, j = 0;
491 u16 bctl;
492
493 pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
494
495 pr_debug("PCI: Scanning behind PCI bridge %s, config %06x, pass %d\n",
496 pci_name(dev), buses & 0xffffff, pass);
497
498 /* Disable MasterAbortMode during probing to avoid reporting
499 of bus errors (in some architectures) */
500 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl);
501 pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
502 bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
503
504 if ((buses & 0xffff00) && !pcibios_assign_all_busses() && !is_cardbus) {
505 unsigned int cmax, busnr;
506 /*
507 * Bus already configured by firmware, process it in the first
508 * pass and just note the configuration.
509 */
510 if (pass)
511 goto out;
512 busnr = (buses >> 8) & 0xFF;
513
514 /*
515 * If we already got to this bus through a different bridge,
516 * ignore it. This can happen with the i450NX chipset.
517 */
518 if (pci_find_bus(pci_domain_nr(bus), busnr)) {
519 printk(KERN_INFO "PCI: Bus %04x:%02x already known\n",
520 pci_domain_nr(bus), busnr);
521 goto out;
522 }
523
524 child = pci_add_new_bus(bus, dev, busnr);
525 if (!child)
526 goto out;
527 child->primary = buses & 0xFF;
528 child->subordinate = (buses >> 16) & 0xFF;
529 child->bridge_ctl = bctl;
530
531 cmax = pci_scan_child_bus(child);
532 if (cmax > max)
533 max = cmax;
534 if (child->subordinate > max)
535 max = child->subordinate;
536 } else {
537 /*
538 * We need to assign a number to this bus which we always
539 * do in the second pass.
540 */
541 if (!pass) {
542 if (pcibios_assign_all_busses())
543 /* Temporarily disable forwarding of the
544 configuration cycles on all bridges in
545 this bus segment to avoid possible
546 conflicts in the second pass between two
547 bridges programmed with overlapping
548 bus ranges. */
549 pci_write_config_dword(dev, PCI_PRIMARY_BUS,
550 buses & ~0xffffff);
551 goto out;
552 }
553
554 /* Clear errors */
555 pci_write_config_word(dev, PCI_STATUS, 0xffff);
556
557 /* Prevent assigning a bus number that already exists.
558 * This can happen when a bridge is hot-plugged */
559 if (pci_find_bus(pci_domain_nr(bus), max+1))
560 goto out;
561 child = pci_add_new_bus(bus, dev, ++max);
562 buses = (buses & 0xff000000)
563 | ((unsigned int)(child->primary) << 0)
564 | ((unsigned int)(child->secondary) << 8)
565 | ((unsigned int)(child->subordinate) << 16);
566
567 /*
568 * yenta.c forces a secondary latency timer of 176.
569 * Copy that behaviour here.
570 */
571 if (is_cardbus) {
572 buses &= ~0xff000000;
573 buses |= CARDBUS_LATENCY_TIMER << 24;
574 }
575
576 /*
577 * We need to blast all three values with a single write.
578 */
579 pci_write_config_dword(dev, PCI_PRIMARY_BUS, buses);
580
581 if (!is_cardbus) {
582 child->bridge_ctl = bctl;
583 /*
584 * Adjust subordinate busnr in parent buses.
585 * We do this before scanning for children because
586 * some devices may not be detected if the bios
587 * was lazy.
588 */
589 pci_fixup_parent_subordinate_busnr(child, max);
590 /* Now we can scan all subordinate buses... */
591 max = pci_scan_child_bus(child);
592 /*
593 * now fix it up again since we have found
594 * the real value of max.
595 */
596 pci_fixup_parent_subordinate_busnr(child, max);
597 } else {
598 /*
599 * For CardBus bridges, we leave 4 bus numbers
600 * as cards with a PCI-to-PCI bridge can be
601 * inserted later.
602 */
603 for (i=0; i<CARDBUS_RESERVE_BUSNR; i++) {
604 struct pci_bus *parent = bus;
605 if (pci_find_bus(pci_domain_nr(bus),
606 max+i+1))
607 break;
608 while (parent->parent) {
609 if ((!pcibios_assign_all_busses()) &&
610 (parent->subordinate > max) &&
611 (parent->subordinate <= max+i)) {
612 j = 1;
613 }
614 parent = parent->parent;
615 }
616 if (j) {
617 /*
618 * Often, there are two cardbus bridges
619 * -- try to leave one valid bus number
620 * for each one.
621 */
622 i /= 2;
623 break;
624 }
625 }
626 max += i;
627 pci_fixup_parent_subordinate_busnr(child, max);
628 }
629 /*
630 * Set the subordinate bus number to its real value.
631 */
632 child->subordinate = max;
633 pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
634 }
635
636 sprintf(child->name, (is_cardbus ? "PCI CardBus #%02x" : "PCI Bus #%02x"), child->number);
637
638 /* Has only triggered on CardBus, fixup is in yenta_socket */
639 while (bus->parent) {
640 if ((child->subordinate > bus->subordinate) ||
641 (child->number > bus->subordinate) ||
642 (child->number < bus->number) ||
643 (child->subordinate < bus->number)) {
644 pr_debug("PCI: Bus #%02x (-#%02x) is %s"
645 "hidden behind%s bridge #%02x (-#%02x)\n",
646 child->number, child->subordinate,
647 (bus->number > child->subordinate &&
648 bus->subordinate < child->number) ?
649 "wholly " : " partially",
650 bus->self->transparent ? " transparent" : " ",
651 bus->number, bus->subordinate);
652 }
653 bus = bus->parent;
654 }
655
656 out:
657 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl);
658
659 return max;
660 }
661
662 /*
663 * Read interrupt line and base address registers.
664 * The architecture-dependent code can tweak these, of course.
665 */
666 static void pci_read_irq(struct pci_dev *dev)
667 {
668 unsigned char irq;
669
670 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq);
671 dev->pin = irq;
672 if (irq)
673 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
674 dev->irq = irq;
675 }
676
677 #define LEGACY_IO_RESOURCE (IORESOURCE_IO | IORESOURCE_PCI_FIXED)
678
679 /**
680 * pci_setup_device - fill in class and map information of a device
681 * @dev: the device structure to fill
682 *
683 * Initialize the device structure with information about the device's
684 * vendor,class,memory and IO-space addresses,IRQ lines etc.
685 * Called at initialisation of the PCI subsystem and by CardBus services.
686 * Returns 0 on success and -1 if unknown type of device (not normal, bridge
687 * or CardBus).
688 */
689 static int pci_setup_device(struct pci_dev * dev)
690 {
691 u32 class;
692
693 sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus),
694 dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
695
696 pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
697 dev->revision = class & 0xff;
698 class >>= 8; /* upper 3 bytes */
699 dev->class = class;
700 class >>= 8;
701
702 pr_debug("PCI: Found %s [%04x/%04x] %06x %02x\n", pci_name(dev),
703 dev->vendor, dev->device, class, dev->hdr_type);
704
705 /* "Unknown power state" */
706 dev->current_state = PCI_UNKNOWN;
707
708 /* Early fixups, before probing the BARs */
709 pci_fixup_device(pci_fixup_early, dev);
710 class = dev->class >> 8;
711
712 switch (dev->hdr_type) { /* header type */
713 case PCI_HEADER_TYPE_NORMAL: /* standard header */
714 if (class == PCI_CLASS_BRIDGE_PCI)
715 goto bad;
716 pci_read_irq(dev);
717 pci_read_bases(dev, 6, PCI_ROM_ADDRESS);
718 pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
719 pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device);
720
721 /*
722 * Do the ugly legacy mode stuff here rather than broken chip
723 * quirk code. Legacy mode ATA controllers have fixed
724 * addresses. These are not always echoed in BAR0-3, and
725 * BAR0-3 in a few cases contain junk!
726 */
727 if (class == PCI_CLASS_STORAGE_IDE) {
728 u8 progif;
729 pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
730 if ((progif & 1) == 0) {
731 dev->resource[0].start = 0x1F0;
732 dev->resource[0].end = 0x1F7;
733 dev->resource[0].flags = LEGACY_IO_RESOURCE;
734 dev->resource[1].start = 0x3F6;
735 dev->resource[1].end = 0x3F6;
736 dev->resource[1].flags = LEGACY_IO_RESOURCE;
737 }
738 if ((progif & 4) == 0) {
739 dev->resource[2].start = 0x170;
740 dev->resource[2].end = 0x177;
741 dev->resource[2].flags = LEGACY_IO_RESOURCE;
742 dev->resource[3].start = 0x376;
743 dev->resource[3].end = 0x376;
744 dev->resource[3].flags = LEGACY_IO_RESOURCE;
745 }
746 }
747 break;
748
749 case PCI_HEADER_TYPE_BRIDGE: /* bridge header */
750 if (class != PCI_CLASS_BRIDGE_PCI)
751 goto bad;
752 /* The PCI-to-PCI bridge spec requires that subtractive
753 decoding (i.e. transparent) bridge must have programming
754 interface code of 0x01. */
755 pci_read_irq(dev);
756 dev->transparent = ((dev->class & 0xff) == 1);
757 pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
758 break;
759
760 case PCI_HEADER_TYPE_CARDBUS: /* CardBus bridge header */
761 if (class != PCI_CLASS_BRIDGE_CARDBUS)
762 goto bad;
763 pci_read_irq(dev);
764 pci_read_bases(dev, 1, 0);
765 pci_read_config_word(dev, PCI_CB_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
766 pci_read_config_word(dev, PCI_CB_SUBSYSTEM_ID, &dev->subsystem_device);
767 break;
768
769 default: /* unknown header */
770 printk(KERN_ERR "PCI: device %s has unknown header type %02x, ignoring.\n",
771 pci_name(dev), dev->hdr_type);
772 return -1;
773
774 bad:
775 printk(KERN_ERR "PCI: %s: class %x doesn't match header type %02x. Ignoring class.\n",
776 pci_name(dev), class, dev->hdr_type);
777 dev->class = PCI_CLASS_NOT_DEFINED;
778 }
779
780 /* We found a fine healthy device, go go go... */
781 return 0;
782 }
783
784 /**
785 * pci_release_dev - free a pci device structure when all users of it are finished.
786 * @dev: device that's been disconnected
787 *
788 * Will be called only by the device core when all users of this pci device are
789 * done.
790 */
791 static void pci_release_dev(struct device *dev)
792 {
793 struct pci_dev *pci_dev;
794
795 pci_dev = to_pci_dev(dev);
796 kfree(pci_dev);
797 }
798
799 static void set_pcie_port_type(struct pci_dev *pdev)
800 {
801 int pos;
802 u16 reg16;
803
804 pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
805 if (!pos)
806 return;
807 pdev->is_pcie = 1;
808 pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, &reg16);
809 pdev->pcie_type = (reg16 & PCI_EXP_FLAGS_TYPE) >> 4;
810 }
811
812 /**
813 * pci_cfg_space_size - get the configuration space size of the PCI device.
814 * @dev: PCI device
815 *
816 * Regular PCI devices have 256 bytes, but PCI-X 2 and PCI Express devices
817 * have 4096 bytes. Even if the device is capable, that doesn't mean we can
818 * access it. Maybe we don't have a way to generate extended config space
819 * accesses, or the device is behind a reverse Express bridge. So we try
820 * reading the dword at 0x100 which must either be 0 or a valid extended
821 * capability header.
822 */
823 int pci_cfg_space_size(struct pci_dev *dev)
824 {
825 int pos;
826 u32 status;
827
828 pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
829 if (!pos) {
830 pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
831 if (!pos)
832 goto fail;
833
834 pci_read_config_dword(dev, pos + PCI_X_STATUS, &status);
835 if (!(status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ)))
836 goto fail;
837 }
838
839 if (pci_read_config_dword(dev, 256, &status) != PCIBIOS_SUCCESSFUL)
840 goto fail;
841 if (status == 0xffffffff)
842 goto fail;
843
844 return PCI_CFG_SPACE_EXP_SIZE;
845
846 fail:
847 return PCI_CFG_SPACE_SIZE;
848 }
849
850 static void pci_release_bus_bridge_dev(struct device *dev)
851 {
852 kfree(dev);
853 }
854
855 struct pci_dev *alloc_pci_dev(void)
856 {
857 struct pci_dev *dev;
858
859 dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL);
860 if (!dev)
861 return NULL;
862
863 INIT_LIST_HEAD(&dev->global_list);
864 INIT_LIST_HEAD(&dev->bus_list);
865
866 pci_msi_init_pci_dev(dev);
867
868 return dev;
869 }
870 EXPORT_SYMBOL(alloc_pci_dev);
871
872 /*
873 * Read the config data for a PCI device, sanity-check it
874 * and fill in the dev structure...
875 */
876 static struct pci_dev * __devinit
877 pci_scan_device(struct pci_bus *bus, int devfn)
878 {
879 struct pci_dev *dev;
880 u32 l;
881 u8 hdr_type;
882 int delay = 1;
883
884 if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l))
885 return NULL;
886
887 /* some broken boards return 0 or ~0 if a slot is empty: */
888 if (l == 0xffffffff || l == 0x00000000 ||
889 l == 0x0000ffff || l == 0xffff0000)
890 return NULL;
891
892 /* Configuration request Retry Status */
893 while (l == 0xffff0001) {
894 msleep(delay);
895 delay *= 2;
896 if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l))
897 return NULL;
898 /* Card hasn't responded in 60 seconds? Must be stuck. */
899 if (delay > 60 * 1000) {
900 printk(KERN_WARNING "Device %04x:%02x:%02x.%d not "
901 "responding\n", pci_domain_nr(bus),
902 bus->number, PCI_SLOT(devfn),
903 PCI_FUNC(devfn));
904 return NULL;
905 }
906 }
907
908 if (pci_bus_read_config_byte(bus, devfn, PCI_HEADER_TYPE, &hdr_type))
909 return NULL;
910
911 dev = alloc_pci_dev();
912 if (!dev)
913 return NULL;
914
915 dev->bus = bus;
916 dev->sysdata = bus->sysdata;
917 dev->dev.parent = bus->bridge;
918 dev->dev.bus = &pci_bus_type;
919 dev->devfn = devfn;
920 dev->hdr_type = hdr_type & 0x7f;
921 dev->multifunction = !!(hdr_type & 0x80);
922 dev->vendor = l & 0xffff;
923 dev->device = (l >> 16) & 0xffff;
924 dev->cfg_size = pci_cfg_space_size(dev);
925 dev->error_state = pci_channel_io_normal;
926 set_pcie_port_type(dev);
927
928 /* Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer)
929 set this higher, assuming the system even supports it. */
930 dev->dma_mask = 0xffffffff;
931 if (pci_setup_device(dev) < 0) {
932 kfree(dev);
933 return NULL;
934 }
935
936 return dev;
937 }
938
939 void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
940 {
941 device_initialize(&dev->dev);
942 dev->dev.release = pci_release_dev;
943 pci_dev_get(dev);
944
945 set_dev_node(&dev->dev, pcibus_to_node(bus));
946 dev->dev.dma_mask = &dev->dma_mask;
947 dev->dev.coherent_dma_mask = 0xffffffffull;
948
949 /* Fix up broken headers */
950 pci_fixup_device(pci_fixup_header, dev);
951
952 /*
953 * Add the device to our list of discovered devices
954 * and the bus list for fixup functions, etc.
955 */
956 INIT_LIST_HEAD(&dev->global_list);
957 down_write(&pci_bus_sem);
958 list_add_tail(&dev->bus_list, &bus->devices);
959 up_write(&pci_bus_sem);
960 }
961
962 struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn)
963 {
964 struct pci_dev *dev;
965
966 dev = pci_scan_device(bus, devfn);
967 if (!dev)
968 return NULL;
969
970 pci_device_add(dev, bus);
971
972 return dev;
973 }
974
975 /**
976 * pci_scan_slot - scan a PCI slot on a bus for devices.
977 * @bus: PCI bus to scan
978 * @devfn: slot number to scan (must have zero function.)
979 *
980 * Scan a PCI slot on the specified PCI bus for devices, adding
981 * discovered devices to the @bus->devices list. New devices
982 * will have an empty dev->global_list head.
983 */
984 int pci_scan_slot(struct pci_bus *bus, int devfn)
985 {
986 int func, nr = 0;
987 int scan_all_fns;
988
989 scan_all_fns = pcibios_scan_all_fns(bus, devfn);
990
991 for (func = 0; func < 8; func++, devfn++) {
992 struct pci_dev *dev;
993
994 dev = pci_scan_single_device(bus, devfn);
995 if (dev) {
996 nr++;
997
998 /*
999 * If this is a single function device,
1000 * don't scan past the first function.
1001 */
1002 if (!dev->multifunction) {
1003 if (func > 0) {
1004 dev->multifunction = 1;
1005 } else {
1006 break;
1007 }
1008 }
1009 } else {
1010 if (func == 0 && !scan_all_fns)
1011 break;
1012 }
1013 }
1014 return nr;
1015 }
1016
1017 unsigned int pci_scan_child_bus(struct pci_bus *bus)
1018 {
1019 unsigned int devfn, pass, max = bus->secondary;
1020 struct pci_dev *dev;
1021
1022 pr_debug("PCI: Scanning bus %04x:%02x\n", pci_domain_nr(bus), bus->number);
1023
1024 /* Go find them, Rover! */
1025 for (devfn = 0; devfn < 0x100; devfn += 8)
1026 pci_scan_slot(bus, devfn);
1027
1028 /*
1029 * After performing arch-dependent fixup of the bus, look behind
1030 * all PCI-to-PCI bridges on this bus.
1031 */
1032 pr_debug("PCI: Fixups for bus %04x:%02x\n", pci_domain_nr(bus), bus->number);
1033 pcibios_fixup_bus(bus);
1034 for (pass=0; pass < 2; pass++)
1035 list_for_each_entry(dev, &bus->devices, bus_list) {
1036 if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
1037 dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
1038 max = pci_scan_bridge(bus, dev, max, pass);
1039 }
1040
1041 /*
1042 * We've scanned the bus and so we know all about what's on
1043 * the other side of any bridges that may be on this bus plus
1044 * any devices.
1045 *
1046 * Return how far we've got finding sub-buses.
1047 */
1048 pr_debug("PCI: Bus scan for %04x:%02x returning with max=%02x\n",
1049 pci_domain_nr(bus), bus->number, max);
1050 return max;
1051 }
1052
1053 unsigned int __devinit pci_do_scan_bus(struct pci_bus *bus)
1054 {
1055 unsigned int max;
1056
1057 max = pci_scan_child_bus(bus);
1058
1059 /*
1060 * Make the discovered devices available.
1061 */
1062 pci_bus_add_devices(bus);
1063
1064 return max;
1065 }
1066
1067 struct pci_bus * pci_create_bus(struct device *parent,
1068 int bus, struct pci_ops *ops, void *sysdata)
1069 {
1070 int error;
1071 struct pci_bus *b;
1072 struct device *dev;
1073
1074 b = pci_alloc_bus();
1075 if (!b)
1076 return NULL;
1077
1078 dev = kmalloc(sizeof(*dev), GFP_KERNEL);
1079 if (!dev){
1080 kfree(b);
1081 return NULL;
1082 }
1083
1084 b->sysdata = sysdata;
1085 b->ops = ops;
1086
1087 if (pci_find_bus(pci_domain_nr(b), bus)) {
1088 /* If we already got to this bus through a different bridge, ignore it */
1089 pr_debug("PCI: Bus %04x:%02x already known\n", pci_domain_nr(b), bus);
1090 goto err_out;
1091 }
1092
1093 down_write(&pci_bus_sem);
1094 list_add_tail(&b->node, &pci_root_buses);
1095 up_write(&pci_bus_sem);
1096
1097 memset(dev, 0, sizeof(*dev));
1098 dev->parent = parent;
1099 dev->release = pci_release_bus_bridge_dev;
1100 sprintf(dev->bus_id, "pci%04x:%02x", pci_domain_nr(b), bus);
1101 error = device_register(dev);
1102 if (error)
1103 goto dev_reg_err;
1104 b->bridge = get_device(dev);
1105
1106 b->class_dev.class = &pcibus_class;
1107 sprintf(b->class_dev.class_id, "%04x:%02x", pci_domain_nr(b), bus);
1108 error = class_device_register(&b->class_dev);
1109 if (error)
1110 goto class_dev_reg_err;
1111 error = class_device_create_file(&b->class_dev, &class_device_attr_cpuaffinity);
1112 if (error)
1113 goto class_dev_create_file_err;
1114
1115 /* Create legacy_io and legacy_mem files for this bus */
1116 pci_create_legacy_files(b);
1117
1118 error = sysfs_create_link(&b->class_dev.kobj, &b->bridge->kobj, "bridge");
1119 if (error)
1120 goto sys_create_link_err;
1121
1122 b->number = b->secondary = bus;
1123 b->resource[0] = &ioport_resource;
1124 b->resource[1] = &iomem_resource;
1125
1126 return b;
1127
1128 sys_create_link_err:
1129 class_device_remove_file(&b->class_dev, &class_device_attr_cpuaffinity);
1130 class_dev_create_file_err:
1131 class_device_unregister(&b->class_dev);
1132 class_dev_reg_err:
1133 device_unregister(dev);
1134 dev_reg_err:
1135 down_write(&pci_bus_sem);
1136 list_del(&b->node);
1137 up_write(&pci_bus_sem);
1138 err_out:
1139 kfree(dev);
1140 kfree(b);
1141 return NULL;
1142 }
1143 EXPORT_SYMBOL_GPL(pci_create_bus);
1144
1145 struct pci_bus *pci_scan_bus_parented(struct device *parent,
1146 int bus, struct pci_ops *ops, void *sysdata)
1147 {
1148 struct pci_bus *b;
1149
1150 b = pci_create_bus(parent, bus, ops, sysdata);
1151 if (b)
1152 b->subordinate = pci_scan_child_bus(b);
1153 return b;
1154 }
1155 EXPORT_SYMBOL(pci_scan_bus_parented);
1156
1157 #ifdef CONFIG_HOTPLUG
1158 EXPORT_SYMBOL(pci_add_new_bus);
1159 EXPORT_SYMBOL(pci_do_scan_bus);
1160 EXPORT_SYMBOL(pci_scan_slot);
1161 EXPORT_SYMBOL(pci_scan_bridge);
1162 EXPORT_SYMBOL(pci_scan_single_device);
1163 EXPORT_SYMBOL_GPL(pci_scan_child_bus);
1164 #endif
1165
1166 static int __init pci_sort_bf_cmp(const struct pci_dev *a, const struct pci_dev *b)
1167 {
1168 if (pci_domain_nr(a->bus) < pci_domain_nr(b->bus)) return -1;
1169 else if (pci_domain_nr(a->bus) > pci_domain_nr(b->bus)) return 1;
1170
1171 if (a->bus->number < b->bus->number) return -1;
1172 else if (a->bus->number > b->bus->number) return 1;
1173
1174 if (a->devfn < b->devfn) return -1;
1175 else if (a->devfn > b->devfn) return 1;
1176
1177 return 0;
1178 }
1179
1180 /*
1181 * Yes, this forcably breaks the klist abstraction temporarily. It
1182 * just wants to sort the klist, not change reference counts and
1183 * take/drop locks rapidly in the process. It does all this while
1184 * holding the lock for the list, so objects can't otherwise be
1185 * added/removed while we're swizzling.
1186 */
1187 static void __init pci_insertion_sort_klist(struct pci_dev *a, struct list_head *list)
1188 {
1189 struct list_head *pos;
1190 struct klist_node *n;
1191 struct device *dev;
1192 struct pci_dev *b;
1193
1194 list_for_each(pos, list) {
1195 n = container_of(pos, struct klist_node, n_node);
1196 dev = container_of(n, struct device, knode_bus);
1197 b = to_pci_dev(dev);
1198 if (pci_sort_bf_cmp(a, b) <= 0) {
1199 list_move_tail(&a->dev.knode_bus.n_node, &b->dev.knode_bus.n_node);
1200 return;
1201 }
1202 }
1203 list_move_tail(&a->dev.knode_bus.n_node, list);
1204 }
1205
1206 static void __init pci_sort_breadthfirst_klist(void)
1207 {
1208 LIST_HEAD(sorted_devices);
1209 struct list_head *pos, *tmp;
1210 struct klist_node *n;
1211 struct device *dev;
1212 struct pci_dev *pdev;
1213
1214 spin_lock(&pci_bus_type.klist_devices.k_lock);
1215 list_for_each_safe(pos, tmp, &pci_bus_type.klist_devices.k_list) {
1216 n = container_of(pos, struct klist_node, n_node);
1217 dev = container_of(n, struct device, knode_bus);
1218 pdev = to_pci_dev(dev);
1219 pci_insertion_sort_klist(pdev, &sorted_devices);
1220 }
1221 list_splice(&sorted_devices, &pci_bus_type.klist_devices.k_list);
1222 spin_unlock(&pci_bus_type.klist_devices.k_lock);
1223 }
1224
1225 static void __init pci_insertion_sort_devices(struct pci_dev *a, struct list_head *list)
1226 {
1227 struct pci_dev *b;
1228
1229 list_for_each_entry(b, list, global_list) {
1230 if (pci_sort_bf_cmp(a, b) <= 0) {
1231 list_move_tail(&a->global_list, &b->global_list);
1232 return;
1233 }
1234 }
1235 list_move_tail(&a->global_list, list);
1236 }
1237
1238 static void __init pci_sort_breadthfirst_devices(void)
1239 {
1240 LIST_HEAD(sorted_devices);
1241 struct pci_dev *dev, *tmp;
1242
1243 down_write(&pci_bus_sem);
1244 list_for_each_entry_safe(dev, tmp, &pci_devices, global_list) {
1245 pci_insertion_sort_devices(dev, &sorted_devices);
1246 }
1247 list_splice(&sorted_devices, &pci_devices);
1248 up_write(&pci_bus_sem);
1249 }
1250
1251 void __init pci_sort_breadthfirst(void)
1252 {
1253 pci_sort_breadthfirst_devices();
1254 pci_sort_breadthfirst_klist();
1255 }
1256
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree