tty: VT, remove unused variable
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / arm / mach-davinci / cp_intc.c
blobf83152d643c5d58921a7b91a826a1790b7bbe4f9
1 /*
2 * TI Common Platform Interrupt Controller (cp_intc) driver
4 * Author: Steve Chen <schen@mvista.com>
5 * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
7 * This file is licensed under the terms of the GNU General Public License
8 * version 2. This program is licensed "as is" without any warranty of any
9 * kind, whether express or implied.
12 #include <linux/init.h>
13 #include <linux/irq.h>
14 #include <linux/io.h>
16 #include <mach/common.h>
17 #include <mach/cp_intc.h>
19 static inline unsigned int cp_intc_read(unsigned offset)
21 return __raw_readl(davinci_intc_base + offset);
24 static inline void cp_intc_write(unsigned long value, unsigned offset)
26 __raw_writel(value, davinci_intc_base + offset);
29 static void cp_intc_ack_irq(struct irq_data *d)
31 cp_intc_write(d->irq, CP_INTC_SYS_STAT_IDX_CLR);
34 /* Disable interrupt */
35 static void cp_intc_mask_irq(struct irq_data *d)
37 /* XXX don't know why we need to disable nIRQ here... */
38 cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_CLR);
39 cp_intc_write(d->irq, CP_INTC_SYS_ENABLE_IDX_CLR);
40 cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
43 /* Enable interrupt */
44 static void cp_intc_unmask_irq(struct irq_data *d)
46 cp_intc_write(d->irq, CP_INTC_SYS_ENABLE_IDX_SET);
49 static int cp_intc_set_irq_type(struct irq_data *d, unsigned int flow_type)
51 unsigned reg = BIT_WORD(d->irq);
52 unsigned mask = BIT_MASK(d->irq);
53 unsigned polarity = cp_intc_read(CP_INTC_SYS_POLARITY(reg));
54 unsigned type = cp_intc_read(CP_INTC_SYS_TYPE(reg));
56 switch (flow_type) {
57 case IRQ_TYPE_EDGE_RISING:
58 polarity |= mask;
59 type |= mask;
60 break;
61 case IRQ_TYPE_EDGE_FALLING:
62 polarity &= ~mask;
63 type |= mask;
64 break;
65 case IRQ_TYPE_LEVEL_HIGH:
66 polarity |= mask;
67 type &= ~mask;
68 break;
69 case IRQ_TYPE_LEVEL_LOW:
70 polarity &= ~mask;
71 type &= ~mask;
72 break;
73 default:
74 return -EINVAL;
77 cp_intc_write(polarity, CP_INTC_SYS_POLARITY(reg));
78 cp_intc_write(type, CP_INTC_SYS_TYPE(reg));
80 return 0;
84 * Faking this allows us to to work with suspend functions of
85 * generic drivers which call {enable|disable}_irq_wake for
86 * wake up interrupt sources (eg RTC on DA850).
88 static int cp_intc_set_wake(struct irq_data *d, unsigned int on)
90 return 0;
93 static struct irq_chip cp_intc_irq_chip = {
94 .name = "cp_intc",
95 .irq_ack = cp_intc_ack_irq,
96 .irq_mask = cp_intc_mask_irq,
97 .irq_unmask = cp_intc_unmask_irq,
98 .irq_set_type = cp_intc_set_irq_type,
99 .irq_set_wake = cp_intc_set_wake,
102 void __init cp_intc_init(void)
104 unsigned long num_irq = davinci_soc_info.intc_irq_num;
105 u8 *irq_prio = davinci_soc_info.intc_irq_prios;
106 u32 *host_map = davinci_soc_info.intc_host_map;
107 unsigned num_reg = BITS_TO_LONGS(num_irq);
108 int i;
110 davinci_intc_type = DAVINCI_INTC_TYPE_CP_INTC;
111 davinci_intc_base = ioremap(davinci_soc_info.intc_base, SZ_8K);
112 if (WARN_ON(!davinci_intc_base))
113 return;
115 cp_intc_write(0, CP_INTC_GLOBAL_ENABLE);
117 /* Disable all host interrupts */
118 cp_intc_write(0, CP_INTC_HOST_ENABLE(0));
120 /* Disable system interrupts */
121 for (i = 0; i < num_reg; i++)
122 cp_intc_write(~0, CP_INTC_SYS_ENABLE_CLR(i));
124 /* Set to normal mode, no nesting, no priority hold */
125 cp_intc_write(0, CP_INTC_CTRL);
126 cp_intc_write(0, CP_INTC_HOST_CTRL);
128 /* Clear system interrupt status */
129 for (i = 0; i < num_reg; i++)
130 cp_intc_write(~0, CP_INTC_SYS_STAT_CLR(i));
132 /* Enable nIRQ (what about nFIQ?) */
133 cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
136 * Priority is determined by host channel: lower channel number has
137 * higher priority i.e. channel 0 has highest priority and channel 31
138 * had the lowest priority.
140 num_reg = (num_irq + 3) >> 2; /* 4 channels per register */
141 if (irq_prio) {
142 unsigned j, k;
143 u32 val;
145 for (k = i = 0; i < num_reg; i++) {
146 for (val = j = 0; j < 4; j++, k++) {
147 val >>= 8;
148 if (k < num_irq)
149 val |= irq_prio[k] << 24;
152 cp_intc_write(val, CP_INTC_CHAN_MAP(i));
154 } else {
156 * Default everything to channel 15 if priority not specified.
157 * Note that channel 0-1 are mapped to nFIQ and channels 2-31
158 * are mapped to nIRQ.
160 for (i = 0; i < num_reg; i++)
161 cp_intc_write(0x0f0f0f0f, CP_INTC_CHAN_MAP(i));
164 if (host_map)
165 for (i = 0; host_map[i] != -1; i++)
166 cp_intc_write(host_map[i], CP_INTC_HOST_MAP(i));
168 /* Set up genirq dispatching for cp_intc */
169 for (i = 0; i < num_irq; i++) {
170 irq_set_chip(i, &cp_intc_irq_chip);
171 set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
172 irq_set_handler(i, handle_edge_irq);
175 /* Enable global interrupt */
176 cp_intc_write(1, CP_INTC_GLOBAL_ENABLE);