V4L/DVB (12236): em28xx: stop abusing of board->decoder for sensor information
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / media / video / em28xx / em28xx.h
blob655dd78cc07bf818923aefe5d7ddc77c9869ee77
1 /*
2 em28xx.h - driver for Empia EM2800/EM2820/2840 USB video capture devices
4 Copyright (C) 2005 Markus Rechberger <mrechberger@gmail.com>
5 Ludovico Cavedon <cavedon@sssup.it>
6 Mauro Carvalho Chehab <mchehab@infradead.org>
8 Based on the em2800 driver from Sascha Sommer <saschasommer@freenet.de>
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2 of the License, or
13 (at your option) any later version.
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the Free Software
22 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 #ifndef _EM28XX_H
26 #define _EM28XX_H
28 #include <linux/videodev2.h>
29 #include <media/videobuf-vmalloc.h>
30 #include <media/v4l2-device.h>
32 #include <linux/i2c.h>
33 #include <linux/mutex.h>
34 #include <media/ir-kbd-i2c.h>
35 #if defined(CONFIG_VIDEO_EM28XX_DVB) || defined(CONFIG_VIDEO_EM28XX_DVB_MODULE)
36 #include <media/videobuf-dvb.h>
37 #endif
38 #include "tuner-xc2028.h"
39 #include "em28xx-reg.h"
41 /* Boards supported by driver */
42 #define EM2800_BOARD_UNKNOWN 0
43 #define EM2820_BOARD_UNKNOWN 1
44 #define EM2820_BOARD_TERRATEC_CINERGY_250 2
45 #define EM2820_BOARD_PINNACLE_USB_2 3
46 #define EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 4
47 #define EM2820_BOARD_MSI_VOX_USB_2 5
48 #define EM2800_BOARD_TERRATEC_CINERGY_200 6
49 #define EM2800_BOARD_LEADTEK_WINFAST_USBII 7
50 #define EM2800_BOARD_KWORLD_USB2800 8
51 #define EM2820_BOARD_PINNACLE_DVC_90 9
52 #define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 10
53 #define EM2880_BOARD_TERRATEC_HYBRID_XS 11
54 #define EM2820_BOARD_KWORLD_PVRTV2800RF 12
55 #define EM2880_BOARD_TERRATEC_PRODIGY_XS 13
56 #define EM2820_BOARD_PROLINK_PLAYTV_USB2 14
57 #define EM2800_BOARD_VGEAR_POCKETTV 15
58 #define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 16
59 #define EM2880_BOARD_PINNACLE_PCTV_HD_PRO 17
60 #define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 18
61 #define EM2860_BOARD_SAA711X_REFERENCE_DESIGN 19
62 #define EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 20
63 #define EM2800_BOARD_GRABBEEX_USB2800 21
64 #define EM2750_BOARD_UNKNOWN 22
65 #define EM2750_BOARD_DLCW_130 23
66 #define EM2820_BOARD_DLINK_USB_TV 24
67 #define EM2820_BOARD_GADMEI_UTV310 25
68 #define EM2820_BOARD_HERCULES_SMART_TV_USB2 26
69 #define EM2820_BOARD_PINNACLE_USB_2_FM1216ME 27
70 #define EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE 28
71 #define EM2820_BOARD_VIDEOLOGY_20K14XUSB 30
72 #define EM2821_BOARD_USBGEAR_VD204 31
73 #define EM2821_BOARD_SUPERCOMP_USB_2 32
74 #define EM2860_BOARD_TERRATEC_HYBRID_XS 34
75 #define EM2860_BOARD_TYPHOON_DVD_MAKER 35
76 #define EM2860_BOARD_NETGMBH_CAM 36
77 #define EM2860_BOARD_GADMEI_UTV330 37
78 #define EM2861_BOARD_YAKUMO_MOVIE_MIXER 38
79 #define EM2861_BOARD_KWORLD_PVRTV_300U 39
80 #define EM2861_BOARD_PLEXTOR_PX_TV100U 40
81 #define EM2870_BOARD_KWORLD_350U 41
82 #define EM2870_BOARD_KWORLD_355U 42
83 #define EM2870_BOARD_TERRATEC_XS 43
84 #define EM2870_BOARD_TERRATEC_XS_MT2060 44
85 #define EM2870_BOARD_PINNACLE_PCTV_DVB 45
86 #define EM2870_BOARD_COMPRO_VIDEOMATE 46
87 #define EM2880_BOARD_KWORLD_DVB_305U 47
88 #define EM2880_BOARD_KWORLD_DVB_310U 48
89 #define EM2880_BOARD_MSI_DIGIVOX_AD 49
90 #define EM2880_BOARD_MSI_DIGIVOX_AD_II 50
91 #define EM2880_BOARD_TERRATEC_HYBRID_XS_FR 51
92 #define EM2881_BOARD_DNT_DA2_HYBRID 52
93 #define EM2881_BOARD_PINNACLE_HYBRID_PRO 53
94 #define EM2882_BOARD_KWORLD_VS_DVBT 54
95 #define EM2882_BOARD_TERRATEC_HYBRID_XS 55
96 #define EM2882_BOARD_PINNACLE_HYBRID_PRO 56
97 #define EM2883_BOARD_KWORLD_HYBRID_330U 57
98 #define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU 58
99 #define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 60
100 #define EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2 61
101 #define EM2820_BOARD_GADMEI_TVR200 62
102 #define EM2860_BOARD_KAIOMY_TVNPC_U2 63
103 #define EM2860_BOARD_EASYCAP 64
104 #define EM2820_BOARD_IODATA_GVMVP_SZ 65
105 #define EM2880_BOARD_EMPIRE_DUAL_TV 66
106 #define EM2860_BOARD_TERRATEC_GRABBY 67
107 #define EM2860_BOARD_TERRATEC_AV350 68
108 #define EM2882_BOARD_KWORLD_ATSC_315U 69
109 #define EM2882_BOARD_EVGA_INDTUBE 70
110 #define EM2820_BOARD_SILVERCREST_WEBCAM 71
112 /* Limits minimum and default number of buffers */
113 #define EM28XX_MIN_BUF 4
114 #define EM28XX_DEF_BUF 8
116 /*Limits the max URB message size */
117 #define URB_MAX_CTRL_SIZE 80
119 /* Params for validated field */
120 #define EM28XX_BOARD_NOT_VALIDATED 1
121 #define EM28XX_BOARD_VALIDATED 0
123 /* Params for em28xx_cmd() audio */
124 #define EM28XX_START_AUDIO 1
125 #define EM28XX_STOP_AUDIO 0
127 /* maximum number of em28xx boards */
128 #define EM28XX_MAXBOARDS 4 /*FIXME: should be bigger */
130 /* maximum number of frames that can be queued */
131 #define EM28XX_NUM_FRAMES 5
132 /* number of frames that get used for v4l2_read() */
133 #define EM28XX_NUM_READ_FRAMES 2
135 /* number of buffers for isoc transfers */
136 #define EM28XX_NUM_BUFS 5
138 /* number of packets for each buffer
139 windows requests only 40 packets .. so we better do the same
140 this is what I found out for all alternate numbers there!
142 #define EM28XX_NUM_PACKETS 40
144 /* default alternate; 0 means choose the best */
145 #define EM28XX_PINOUT 0
147 #define EM28XX_INTERLACED_DEFAULT 1
150 #define (use usbview if you want to get the other alternate number infos)
151 #define
152 #define alternate number 2
153 #define Endpoint Address: 82
154 Direction: in
155 Attribute: 1
156 Type: Isoc
157 Max Packet Size: 1448
158 Interval: 125us
160 alternate number 7
162 Endpoint Address: 82
163 Direction: in
164 Attribute: 1
165 Type: Isoc
166 Max Packet Size: 3072
167 Interval: 125us
170 /* time to wait when stopping the isoc transfer */
171 #define EM28XX_URB_TIMEOUT \
172 msecs_to_jiffies(EM28XX_NUM_BUFS * EM28XX_NUM_PACKETS)
174 /* time in msecs to wait for i2c writes to finish */
175 #define EM2800_I2C_WRITE_TIMEOUT 20
177 enum em28xx_mode {
178 EM28XX_SUSPEND,
179 EM28XX_ANALOG_MODE,
180 EM28XX_DIGITAL_MODE,
183 enum em28xx_stream_state {
184 STREAM_OFF,
185 STREAM_INTERRUPT,
186 STREAM_ON,
189 struct em28xx;
191 struct em28xx_usb_isoc_ctl {
192 /* max packet size of isoc transaction */
193 int max_pkt_size;
195 /* number of allocated urbs */
196 int num_bufs;
198 /* urb for isoc transfers */
199 struct urb **urb;
201 /* transfer buffers for isoc transfer */
202 char **transfer_buffer;
204 /* Last buffer command and region */
205 u8 cmd;
206 int pos, size, pktsize;
208 /* Last field: ODD or EVEN? */
209 int field;
211 /* Stores incomplete commands */
212 u32 tmp_buf;
213 int tmp_buf_len;
215 /* Stores already requested buffers */
216 struct em28xx_buffer *buf;
218 /* Stores the number of received fields */
219 int nfields;
221 /* isoc urb callback */
222 int (*isoc_copy) (struct em28xx *dev, struct urb *urb);
226 /* Struct to enumberate video formats */
227 struct em28xx_fmt {
228 char *name;
229 u32 fourcc; /* v4l2 format id */
230 int depth;
231 int reg;
234 /* buffer for one video frame */
235 struct em28xx_buffer {
236 /* common v4l buffer stuff -- must be first */
237 struct videobuf_buffer vb;
239 struct list_head frame;
240 int top_field;
241 int receiving;
244 struct em28xx_dmaqueue {
245 struct list_head active;
246 struct list_head queued;
248 wait_queue_head_t wq;
250 /* Counters to control buffer fill */
251 int pos;
254 /* io methods */
255 enum em28xx_io_method {
256 IO_NONE,
257 IO_READ,
258 IO_MMAP,
261 /* inputs */
263 #define MAX_EM28XX_INPUT 4
264 enum enum28xx_itype {
265 EM28XX_VMUX_COMPOSITE1 = 1,
266 EM28XX_VMUX_COMPOSITE2,
267 EM28XX_VMUX_COMPOSITE3,
268 EM28XX_VMUX_COMPOSITE4,
269 EM28XX_VMUX_SVIDEO,
270 EM28XX_VMUX_TELEVISION,
271 EM28XX_VMUX_CABLE,
272 EM28XX_VMUX_DVB,
273 EM28XX_VMUX_DEBUG,
274 EM28XX_RADIO,
277 enum em28xx_ac97_mode {
278 EM28XX_NO_AC97 = 0,
279 EM28XX_AC97_EM202,
280 EM28XX_AC97_SIGMATEL,
281 EM28XX_AC97_OTHER,
284 struct em28xx_audio_mode {
285 enum em28xx_ac97_mode ac97;
287 u16 ac97_feat;
288 u32 ac97_vendor_id;
290 unsigned int has_audio:1;
292 unsigned int i2s_3rates:1;
293 unsigned int i2s_5rates:1;
296 /* em28xx has two audio inputs: tuner and line in.
297 However, on most devices, an auxiliary AC97 codec device is used.
298 The AC97 device may have several different inputs and outputs,
299 depending on their model. So, it is possible to use AC97 mixer to
300 address more than two different entries.
302 enum em28xx_amux {
303 /* This is the only entry for em28xx tuner input */
304 EM28XX_AMUX_VIDEO, /* em28xx tuner, AC97 mixer Video */
306 EM28XX_AMUX_LINE_IN, /* AC97 mixer Line In */
308 /* Some less-common mixer setups */
309 EM28XX_AMUX_VIDEO2, /* em28xx Line in, AC97 mixer Video */
310 EM28XX_AMUX_PHONE,
311 EM28XX_AMUX_MIC,
312 EM28XX_AMUX_CD,
313 EM28XX_AMUX_AUX,
314 EM28XX_AMUX_PCM_OUT,
317 enum em28xx_aout {
318 /* AC97 outputs */
319 EM28XX_AOUT_MASTER = 1 << 0,
320 EM28XX_AOUT_LINE = 1 << 1,
321 EM28XX_AOUT_MONO = 1 << 2,
322 EM28XX_AOUT_LFE = 1 << 3,
323 EM28XX_AOUT_SURR = 1 << 4,
325 /* PCM IN Mixer - used by AC97_RECORD_SELECT register */
326 EM28XX_AOUT_PCM_IN = 1 << 7,
328 /* Bits 10-8 are used to indicate the PCM IN record select */
329 EM28XX_AOUT_PCM_MIC_PCM = 0 << 8,
330 EM28XX_AOUT_PCM_CD = 1 << 8,
331 EM28XX_AOUT_PCM_VIDEO = 2 << 8,
332 EM28XX_AOUT_PCM_AUX = 3 << 8,
333 EM28XX_AOUT_PCM_LINE = 4 << 8,
334 EM28XX_AOUT_PCM_STEREO = 5 << 8,
335 EM28XX_AOUT_PCM_MONO = 6 << 8,
336 EM28XX_AOUT_PCM_PHONE = 7 << 8,
339 static inline int ac97_return_record_select(int a_out)
341 return (a_out & 0x700) >> 8;
344 struct em28xx_reg_seq {
345 int reg;
346 unsigned char val, mask;
347 int sleep;
350 struct em28xx_input {
351 enum enum28xx_itype type;
352 unsigned int vmux;
353 enum em28xx_amux amux;
354 enum em28xx_aout aout;
355 struct em28xx_reg_seq *gpio;
358 #define INPUT(nr) (&em28xx_boards[dev->model].input[nr])
360 enum em28xx_decoder {
361 EM28XX_NODECODER = 0,
362 EM28XX_TVP5150,
363 EM28XX_SAA711X,
366 enum em28xx_sensor {
367 EM28XX_NOSENSOR = 0,
368 EM28XX_MT9V011,
371 enum em28xx_adecoder {
372 EM28XX_NOADECODER = 0,
373 EM28XX_TVAUDIO,
376 struct em28xx_board {
377 char *name;
378 int vchannels;
379 int tuner_type;
380 int tuner_addr;
382 /* i2c flags */
383 unsigned int tda9887_conf;
385 /* GPIO sequences */
386 struct em28xx_reg_seq *dvb_gpio;
387 struct em28xx_reg_seq *suspend_gpio;
388 struct em28xx_reg_seq *tuner_gpio;
389 struct em28xx_reg_seq *mute_gpio;
391 unsigned int is_em2800:1;
392 unsigned int has_msp34xx:1;
393 unsigned int mts_firmware:1;
394 unsigned int max_range_640_480:1;
395 unsigned int has_dvb:1;
396 unsigned int has_snapshot_button:1;
397 unsigned int is_webcam:1;
398 unsigned int valid:1;
400 unsigned char xclk, i2c_speed;
401 unsigned char radio_addr;
402 unsigned short tvaudio_addr;
404 enum em28xx_decoder decoder;
405 enum em28xx_adecoder adecoder;
407 struct em28xx_input input[MAX_EM28XX_INPUT];
408 struct em28xx_input radio;
409 IR_KEYTAB_TYPE *ir_codes;
412 struct em28xx_eeprom {
413 u32 id; /* 0x9567eb1a */
414 u16 vendor_ID;
415 u16 product_ID;
417 u16 chip_conf;
419 u16 board_conf;
421 u16 string1, string2, string3;
423 u8 string_idx_table;
426 /* device states */
427 enum em28xx_dev_state {
428 DEV_INITIALIZED = 0x01,
429 DEV_DISCONNECTED = 0x02,
430 DEV_MISCONFIGURED = 0x04,
433 #define EM28XX_AUDIO_BUFS 5
434 #define EM28XX_NUM_AUDIO_PACKETS 64
435 #define EM28XX_AUDIO_MAX_PACKET_SIZE 196 /* static value */
436 #define EM28XX_CAPTURE_STREAM_EN 1
438 /* em28xx extensions */
439 #define EM28XX_AUDIO 0x10
440 #define EM28XX_DVB 0x20
442 struct em28xx_audio {
443 char name[50];
444 char *transfer_buffer[EM28XX_AUDIO_BUFS];
445 struct urb *urb[EM28XX_AUDIO_BUFS];
446 struct usb_device *udev;
447 unsigned int capture_transfer_done;
448 struct snd_pcm_substream *capture_pcm_substream;
450 unsigned int hwptr_done_capture;
451 struct snd_card *sndcard;
453 int users;
454 enum em28xx_stream_state capture_stream;
455 spinlock_t slock;
458 struct em28xx;
460 struct em28xx_fh {
461 struct em28xx *dev;
462 unsigned int stream_on:1; /* Locks streams */
463 int radio;
465 struct videobuf_queue vb_vidq;
467 enum v4l2_buf_type type;
470 /* main device struct */
471 struct em28xx {
472 /* generic device properties */
473 char name[30]; /* name (including minor) of the device */
474 int model; /* index in the device_data struct */
475 int devno; /* marks the number of this device */
476 enum em28xx_chip_id chip_id;
478 struct v4l2_device v4l2_dev;
479 struct em28xx_board board;
481 enum em28xx_sensor em28xx_sensor;
483 unsigned int stream_on:1; /* Locks streams */
484 unsigned int has_audio_class:1;
485 unsigned int has_alsa_audio:1;
487 struct em28xx_fmt *format;
489 struct em28xx_IR *ir;
491 /* Some older em28xx chips needs a waiting time after writing */
492 unsigned int wait_after_write;
494 struct list_head devlist;
496 u32 i2s_speed; /* I2S speed for audio digital stream */
498 struct em28xx_audio_mode audio_mode;
500 int tuner_type; /* type of the tuner */
501 int tuner_addr; /* tuner address */
502 int tda9887_conf;
503 /* i2c i/o */
504 struct i2c_adapter i2c_adap;
505 struct i2c_client i2c_client;
506 /* video for linux */
507 int users; /* user count for exclusive use */
508 struct video_device *vdev; /* video for linux device struct */
509 v4l2_std_id norm; /* selected tv norm */
510 int ctl_freq; /* selected frequency */
511 unsigned int ctl_input; /* selected input */
512 unsigned int ctl_ainput;/* selected audio input */
513 unsigned int ctl_aoutput;/* selected audio output */
514 int mute;
515 int volume;
516 /* frame properties */
517 int width; /* current frame width */
518 int height; /* current frame height */
519 unsigned hscale; /* horizontal scale factor (see datasheet) */
520 unsigned vscale; /* vertical scale factor (see datasheet) */
521 int interlaced; /* 1=interlace fileds, 0=just top fileds */
522 unsigned int video_bytesread; /* Number of bytes read */
524 unsigned long hash; /* eeprom hash - for boards with generic ID */
525 unsigned long i2c_hash; /* i2c devicelist hash -
526 for boards with generic ID */
528 struct em28xx_audio adev;
530 /* states */
531 enum em28xx_dev_state state;
532 enum em28xx_io_method io;
534 struct work_struct request_module_wk;
536 /* locks */
537 struct mutex lock;
538 struct mutex ctrl_urb_lock; /* protects urb_buf */
539 /* spinlock_t queue_lock; */
540 struct list_head inqueue, outqueue;
541 wait_queue_head_t open, wait_frame, wait_stream;
542 struct video_device *vbi_dev;
543 struct video_device *radio_dev;
545 unsigned char eedata[256];
547 /* Isoc control struct */
548 struct em28xx_dmaqueue vidq;
549 struct em28xx_usb_isoc_ctl isoc_ctl;
550 spinlock_t slock;
552 /* usb transfer */
553 struct usb_device *udev; /* the usb device */
554 int alt; /* alternate */
555 int max_pkt_size; /* max packet size of isoc transaction */
556 int num_alt; /* Number of alternative settings */
557 unsigned int *alt_max_pkt_size; /* array of wMaxPacketSize */
558 struct urb *urb[EM28XX_NUM_BUFS]; /* urb for isoc transfers */
559 char *transfer_buffer[EM28XX_NUM_BUFS]; /* transfer buffers for isoc
560 transfer */
561 char urb_buf[URB_MAX_CTRL_SIZE]; /* urb control msg buffer */
563 /* helper funcs that call usb_control_msg */
564 int (*em28xx_write_regs) (struct em28xx *dev, u16 reg,
565 char *buf, int len);
566 int (*em28xx_read_reg) (struct em28xx *dev, u16 reg);
567 int (*em28xx_read_reg_req_len) (struct em28xx *dev, u8 req, u16 reg,
568 char *buf, int len);
569 int (*em28xx_write_regs_req) (struct em28xx *dev, u8 req, u16 reg,
570 char *buf, int len);
571 int (*em28xx_read_reg_req) (struct em28xx *dev, u8 req, u16 reg);
573 enum em28xx_mode mode;
575 /* register numbers for GPO/GPIO registers */
576 u16 reg_gpo_num, reg_gpio_num;
578 /* Caches GPO and GPIO registers */
579 unsigned char reg_gpo, reg_gpio;
581 /* Snapshot button */
582 char snapshot_button_path[30]; /* path of the input dev */
583 struct input_dev *sbutton_input_dev;
584 struct delayed_work sbutton_query_work;
586 struct em28xx_dvb *dvb;
589 struct em28xx_ops {
590 struct list_head next;
591 char *name;
592 int id;
593 int (*init)(struct em28xx *);
594 int (*fini)(struct em28xx *);
597 /* Provided by em28xx-i2c.c */
598 void em28xx_do_i2c_scan(struct em28xx *dev);
599 int em28xx_i2c_register(struct em28xx *dev);
600 int em28xx_i2c_unregister(struct em28xx *dev);
602 /* Provided by em28xx-core.c */
604 u32 em28xx_request_buffers(struct em28xx *dev, u32 count);
605 void em28xx_queue_unusedframes(struct em28xx *dev);
606 void em28xx_release_buffers(struct em28xx *dev);
608 int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
609 char *buf, int len);
610 int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg);
611 int em28xx_read_reg(struct em28xx *dev, u16 reg);
612 int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
613 int len);
614 int em28xx_write_regs(struct em28xx *dev, u16 reg, char *buf, int len);
615 int em28xx_write_reg(struct em28xx *dev, u16 reg, u8 val);
617 int em28xx_read_ac97(struct em28xx *dev, u8 reg);
618 int em28xx_write_ac97(struct em28xx *dev, u8 reg, u16 val);
620 int em28xx_audio_analog_set(struct em28xx *dev);
621 int em28xx_audio_setup(struct em28xx *dev);
623 int em28xx_colorlevels_set_default(struct em28xx *dev);
624 int em28xx_capture_start(struct em28xx *dev, int start);
625 int em28xx_set_outfmt(struct em28xx *dev);
626 int em28xx_resolution_set(struct em28xx *dev);
627 int em28xx_set_alternate(struct em28xx *dev);
628 int em28xx_init_isoc(struct em28xx *dev, int max_packets,
629 int num_bufs, int max_pkt_size,
630 int (*isoc_copy) (struct em28xx *dev, struct urb *urb));
631 void em28xx_uninit_isoc(struct em28xx *dev);
632 int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev);
633 int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode);
634 int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio);
635 void em28xx_wake_i2c(struct em28xx *dev);
636 void em28xx_remove_from_devlist(struct em28xx *dev);
637 void em28xx_add_into_devlist(struct em28xx *dev);
638 struct em28xx *em28xx_get_device(int minor,
639 enum v4l2_buf_type *fh_type,
640 int *has_radio);
641 int em28xx_register_extension(struct em28xx_ops *dev);
642 void em28xx_unregister_extension(struct em28xx_ops *dev);
643 void em28xx_init_extension(struct em28xx *dev);
644 void em28xx_close_extension(struct em28xx *dev);
646 /* Provided by em28xx-video.c */
647 int em28xx_register_analog_devices(struct em28xx *dev);
648 void em28xx_release_analog_resources(struct em28xx *dev);
650 /* Provided by em28xx-cards.c */
651 extern int em2800_variant_detect(struct usb_device *udev, int model);
652 extern void em28xx_pre_card_setup(struct em28xx *dev);
653 extern void em28xx_card_setup(struct em28xx *dev);
654 extern struct em28xx_board em28xx_boards[];
655 extern struct usb_device_id em28xx_id_table[];
656 extern const unsigned int em28xx_bcount;
657 void em28xx_register_i2c_ir(struct em28xx *dev);
658 int em28xx_tuner_callback(void *ptr, int component, int command, int arg);
659 void em28xx_release_resources(struct em28xx *dev);
661 /* Provided by em28xx-input.c */
662 int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw);
663 int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw);
664 int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
665 u32 *ir_raw);
666 void em28xx_register_snapshot_button(struct em28xx *dev);
667 void em28xx_deregister_snapshot_button(struct em28xx *dev);
669 int em28xx_ir_init(struct em28xx *dev);
670 int em28xx_ir_fini(struct em28xx *dev);
672 /* printk macros */
674 #define em28xx_err(fmt, arg...) do {\
675 printk(KERN_ERR fmt , ##arg); } while (0)
677 #define em28xx_errdev(fmt, arg...) do {\
678 printk(KERN_ERR "%s: "fmt,\
679 dev->name , ##arg); } while (0)
681 #define em28xx_info(fmt, arg...) do {\
682 printk(KERN_INFO "%s: "fmt,\
683 dev->name , ##arg); } while (0)
684 #define em28xx_warn(fmt, arg...) do {\
685 printk(KERN_WARNING "%s: "fmt,\
686 dev->name , ##arg); } while (0)
688 static inline int em28xx_compression_disable(struct em28xx *dev)
690 /* side effect of disabling scaler and mixer */
691 return em28xx_write_reg(dev, EM28XX_R26_COMPR, 0x00);
694 static inline int em28xx_contrast_get(struct em28xx *dev)
696 return em28xx_read_reg(dev, EM28XX_R20_YGAIN) & 0x1f;
699 static inline int em28xx_brightness_get(struct em28xx *dev)
701 return em28xx_read_reg(dev, EM28XX_R21_YOFFSET);
704 static inline int em28xx_saturation_get(struct em28xx *dev)
706 return em28xx_read_reg(dev, EM28XX_R22_UVGAIN) & 0x1f;
709 static inline int em28xx_u_balance_get(struct em28xx *dev)
711 return em28xx_read_reg(dev, EM28XX_R23_UOFFSET);
714 static inline int em28xx_v_balance_get(struct em28xx *dev)
716 return em28xx_read_reg(dev, EM28XX_R24_VOFFSET);
719 static inline int em28xx_gamma_get(struct em28xx *dev)
721 return em28xx_read_reg(dev, EM28XX_R14_GAMMA) & 0x3f;
724 static inline int em28xx_contrast_set(struct em28xx *dev, s32 val)
726 u8 tmp = (u8) val;
727 return em28xx_write_regs(dev, EM28XX_R20_YGAIN, &tmp, 1);
730 static inline int em28xx_brightness_set(struct em28xx *dev, s32 val)
732 u8 tmp = (u8) val;
733 return em28xx_write_regs(dev, EM28XX_R21_YOFFSET, &tmp, 1);
736 static inline int em28xx_saturation_set(struct em28xx *dev, s32 val)
738 u8 tmp = (u8) val;
739 return em28xx_write_regs(dev, EM28XX_R22_UVGAIN, &tmp, 1);
742 static inline int em28xx_u_balance_set(struct em28xx *dev, s32 val)
744 u8 tmp = (u8) val;
745 return em28xx_write_regs(dev, EM28XX_R23_UOFFSET, &tmp, 1);
748 static inline int em28xx_v_balance_set(struct em28xx *dev, s32 val)
750 u8 tmp = (u8) val;
751 return em28xx_write_regs(dev, EM28XX_R24_VOFFSET, &tmp, 1);
754 static inline int em28xx_gamma_set(struct em28xx *dev, s32 val)
756 u8 tmp = (u8) val;
757 return em28xx_write_regs(dev, EM28XX_R14_GAMMA, &tmp, 1);
760 /*FIXME: maxw should be dependent of alt mode */
761 static inline unsigned int norm_maxw(struct em28xx *dev)
763 if (dev->board.max_range_640_480)
764 return 640;
765 else
766 return 720;
769 static inline unsigned int norm_maxh(struct em28xx *dev)
771 if (dev->board.max_range_640_480)
772 return 480;
773 else
774 return (dev->norm & V4L2_STD_625_50) ? 576 : 480;
776 #endif