[DNS RESOLVER] Minor typo correction
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / amd8111e.c
blob585c25f4b60c27437043eacbea291d137a60a210
2 /* Advanced Micro Devices Inc. AMD8111E Linux Network Driver
3 * Copyright (C) 2004 Advanced Micro Devices
6 * Copyright 2001,2002 Jeff Garzik <jgarzik@mandrakesoft.com> [ 8139cp.c,tg3.c ]
7 * Copyright (C) 2001, 2002 David S. Miller (davem@redhat.com)[ tg3.c]
8 * Copyright 1996-1999 Thomas Bogendoerfer [ pcnet32.c ]
9 * Derived from the lance driver written 1993,1994,1995 by Donald Becker.
10 * Copyright 1993 United States Government as represented by the
11 * Director, National Security Agency.[ pcnet32.c ]
12 * Carsten Langgaard, carstenl@mips.com [ pcnet32.c ]
13 * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
16 * This program is free software; you can redistribute it and/or modify
17 * it under the terms of the GNU General Public License as published by
18 * the Free Software Foundation; either version 2 of the License, or
19 * (at your option) any later version.
21 * This program is distributed in the hope that it will be useful,
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 * GNU General Public License for more details.
26 * You should have received a copy of the GNU General Public License
27 * along with this program; if not, write to the Free Software
28 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
29 * USA
31 Module Name:
33 amd8111e.c
35 Abstract:
37 AMD8111 based 10/100 Ethernet Controller Driver.
39 Environment:
41 Kernel Mode
43 Revision History:
44 3.0.0
45 Initial Revision.
46 3.0.1
47 1. Dynamic interrupt coalescing.
48 2. Removed prev_stats.
49 3. MII support.
50 4. Dynamic IPG support
51 3.0.2 05/29/2003
52 1. Bug fix: Fixed failure to send jumbo packets larger than 4k.
53 2. Bug fix: Fixed VLAN support failure.
54 3. Bug fix: Fixed receive interrupt coalescing bug.
55 4. Dynamic IPG support is disabled by default.
56 3.0.3 06/05/2003
57 1. Bug fix: Fixed failure to close the interface if SMP is enabled.
58 3.0.4 12/09/2003
59 1. Added set_mac_address routine for bonding driver support.
60 2. Tested the driver for bonding support
61 3. Bug fix: Fixed mismach in actual receive buffer lenth and lenth
62 indicated to the h/w.
63 4. Modified amd8111e_rx() routine to receive all the received packets
64 in the first interrupt.
65 5. Bug fix: Corrected rx_errors reported in get_stats() function.
66 3.0.5 03/22/2004
67 1. Added NAPI support
72 #include <linux/module.h>
73 #include <linux/kernel.h>
74 #include <linux/types.h>
75 #include <linux/compiler.h>
76 #include <linux/delay.h>
77 #include <linux/init.h>
78 #include <linux/ioport.h>
79 #include <linux/pci.h>
80 #include <linux/netdevice.h>
81 #include <linux/etherdevice.h>
82 #include <linux/skbuff.h>
83 #include <linux/ethtool.h>
84 #include <linux/mii.h>
85 #include <linux/if_vlan.h>
86 #include <linux/ctype.h>
87 #include <linux/crc32.h>
88 #include <linux/dma-mapping.h>
90 #include <asm/system.h>
91 #include <asm/io.h>
92 #include <asm/byteorder.h>
93 #include <asm/uaccess.h>
95 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
96 #define AMD8111E_VLAN_TAG_USED 1
97 #else
98 #define AMD8111E_VLAN_TAG_USED 0
99 #endif
101 #include "amd8111e.h"
102 #define MODULE_NAME "amd8111e"
103 #define MODULE_VERS "3.0.7"
104 MODULE_AUTHOR("Advanced Micro Devices, Inc.");
105 MODULE_DESCRIPTION ("AMD8111 based 10/100 Ethernet Controller. Driver Version "MODULE_VERS);
106 MODULE_LICENSE("GPL");
107 MODULE_DEVICE_TABLE(pci, amd8111e_pci_tbl);
108 module_param_array(speed_duplex, int, NULL, 0);
109 MODULE_PARM_DESC(speed_duplex, "Set device speed and duplex modes, 0: Auto Negotitate, 1: 10Mbps Half Duplex, 2: 10Mbps Full Duplex, 3: 100Mbps Half Duplex, 4: 100Mbps Full Duplex");
110 module_param_array(coalesce, bool, NULL, 0);
111 MODULE_PARM_DESC(coalesce, "Enable or Disable interrupt coalescing, 1: Enable, 0: Disable");
112 module_param_array(dynamic_ipg, bool, NULL, 0);
113 MODULE_PARM_DESC(dynamic_ipg, "Enable or Disable dynamic IPG, 1: Enable, 0: Disable");
115 static DEFINE_PCI_DEVICE_TABLE(amd8111e_pci_tbl) = {
117 { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD8111E_7462,
118 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
119 { 0, }
123 This function will read the PHY registers.
125 static int amd8111e_read_phy(struct amd8111e_priv* lp, int phy_id, int reg, u32* val)
127 void __iomem *mmio = lp->mmio;
128 unsigned int reg_val;
129 unsigned int repeat= REPEAT_CNT;
131 reg_val = readl(mmio + PHY_ACCESS);
132 while (reg_val & PHY_CMD_ACTIVE)
133 reg_val = readl( mmio + PHY_ACCESS );
135 writel( PHY_RD_CMD | ((phy_id & 0x1f) << 21) |
136 ((reg & 0x1f) << 16), mmio +PHY_ACCESS);
138 reg_val = readl(mmio + PHY_ACCESS);
139 udelay(30); /* It takes 30 us to read/write data */
140 } while (--repeat && (reg_val & PHY_CMD_ACTIVE));
141 if(reg_val & PHY_RD_ERR)
142 goto err_phy_read;
144 *val = reg_val & 0xffff;
145 return 0;
146 err_phy_read:
147 *val = 0;
148 return -EINVAL;
153 This function will write into PHY registers.
155 static int amd8111e_write_phy(struct amd8111e_priv* lp,int phy_id, int reg, u32 val)
157 unsigned int repeat = REPEAT_CNT;
158 void __iomem *mmio = lp->mmio;
159 unsigned int reg_val;
161 reg_val = readl(mmio + PHY_ACCESS);
162 while (reg_val & PHY_CMD_ACTIVE)
163 reg_val = readl( mmio + PHY_ACCESS );
165 writel( PHY_WR_CMD | ((phy_id & 0x1f) << 21) |
166 ((reg & 0x1f) << 16)|val, mmio + PHY_ACCESS);
169 reg_val = readl(mmio + PHY_ACCESS);
170 udelay(30); /* It takes 30 us to read/write the data */
171 } while (--repeat && (reg_val & PHY_CMD_ACTIVE));
173 if(reg_val & PHY_RD_ERR)
174 goto err_phy_write;
176 return 0;
178 err_phy_write:
179 return -EINVAL;
183 This is the mii register read function provided to the mii interface.
185 static int amd8111e_mdio_read(struct net_device * dev, int phy_id, int reg_num)
187 struct amd8111e_priv* lp = netdev_priv(dev);
188 unsigned int reg_val;
190 amd8111e_read_phy(lp,phy_id,reg_num,&reg_val);
191 return reg_val;
196 This is the mii register write function provided to the mii interface.
198 static void amd8111e_mdio_write(struct net_device * dev, int phy_id, int reg_num, int val)
200 struct amd8111e_priv* lp = netdev_priv(dev);
202 amd8111e_write_phy(lp, phy_id, reg_num, val);
206 This function will set PHY speed. During initialization sets the original speed to 100 full.
208 static void amd8111e_set_ext_phy(struct net_device *dev)
210 struct amd8111e_priv *lp = netdev_priv(dev);
211 u32 bmcr,advert,tmp;
213 /* Determine mii register values to set the speed */
214 advert = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_ADVERTISE);
215 tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
216 switch (lp->ext_phy_option){
218 default:
219 case SPEED_AUTONEG: /* advertise all values */
220 tmp |= ( ADVERTISE_10HALF|ADVERTISE_10FULL|
221 ADVERTISE_100HALF|ADVERTISE_100FULL) ;
222 break;
223 case SPEED10_HALF:
224 tmp |= ADVERTISE_10HALF;
225 break;
226 case SPEED10_FULL:
227 tmp |= ADVERTISE_10FULL;
228 break;
229 case SPEED100_HALF:
230 tmp |= ADVERTISE_100HALF;
231 break;
232 case SPEED100_FULL:
233 tmp |= ADVERTISE_100FULL;
234 break;
237 if(advert != tmp)
238 amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_ADVERTISE, tmp);
239 /* Restart auto negotiation */
240 bmcr = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_BMCR);
241 bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
242 amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_BMCR, bmcr);
247 This function will unmap skb->data space and will free
248 all transmit and receive skbuffs.
250 static int amd8111e_free_skbs(struct net_device *dev)
252 struct amd8111e_priv *lp = netdev_priv(dev);
253 struct sk_buff* rx_skbuff;
254 int i;
256 /* Freeing transmit skbs */
257 for(i = 0; i < NUM_TX_BUFFERS; i++){
258 if(lp->tx_skbuff[i]){
259 pci_unmap_single(lp->pci_dev,lp->tx_dma_addr[i], lp->tx_skbuff[i]->len,PCI_DMA_TODEVICE);
260 dev_kfree_skb (lp->tx_skbuff[i]);
261 lp->tx_skbuff[i] = NULL;
262 lp->tx_dma_addr[i] = 0;
265 /* Freeing previously allocated receive buffers */
266 for (i = 0; i < NUM_RX_BUFFERS; i++){
267 rx_skbuff = lp->rx_skbuff[i];
268 if(rx_skbuff != NULL){
269 pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[i],
270 lp->rx_buff_len - 2,PCI_DMA_FROMDEVICE);
271 dev_kfree_skb(lp->rx_skbuff[i]);
272 lp->rx_skbuff[i] = NULL;
273 lp->rx_dma_addr[i] = 0;
277 return 0;
281 This will set the receive buffer length corresponding to the mtu size of networkinterface.
283 static inline void amd8111e_set_rx_buff_len(struct net_device* dev)
285 struct amd8111e_priv* lp = netdev_priv(dev);
286 unsigned int mtu = dev->mtu;
288 if (mtu > ETH_DATA_LEN){
289 /* MTU + ethernet header + FCS
290 + optional VLAN tag + skb reserve space 2 */
292 lp->rx_buff_len = mtu + ETH_HLEN + 10;
293 lp->options |= OPTION_JUMBO_ENABLE;
294 } else{
295 lp->rx_buff_len = PKT_BUFF_SZ;
296 lp->options &= ~OPTION_JUMBO_ENABLE;
301 This function will free all the previously allocated buffers, determine new receive buffer length and will allocate new receive buffers. This function also allocates and initializes both the transmitter and receive hardware descriptors.
303 static int amd8111e_init_ring(struct net_device *dev)
305 struct amd8111e_priv *lp = netdev_priv(dev);
306 int i;
308 lp->rx_idx = lp->tx_idx = 0;
309 lp->tx_complete_idx = 0;
310 lp->tx_ring_idx = 0;
313 if(lp->opened)
314 /* Free previously allocated transmit and receive skbs */
315 amd8111e_free_skbs(dev);
317 else{
318 /* allocate the tx and rx descriptors */
319 if((lp->tx_ring = pci_alloc_consistent(lp->pci_dev,
320 sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,
321 &lp->tx_ring_dma_addr)) == NULL)
323 goto err_no_mem;
325 if((lp->rx_ring = pci_alloc_consistent(lp->pci_dev,
326 sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,
327 &lp->rx_ring_dma_addr)) == NULL)
329 goto err_free_tx_ring;
332 /* Set new receive buff size */
333 amd8111e_set_rx_buff_len(dev);
335 /* Allocating receive skbs */
336 for (i = 0; i < NUM_RX_BUFFERS; i++) {
338 if (!(lp->rx_skbuff[i] = dev_alloc_skb(lp->rx_buff_len))) {
339 /* Release previos allocated skbs */
340 for(--i; i >= 0 ;i--)
341 dev_kfree_skb(lp->rx_skbuff[i]);
342 goto err_free_rx_ring;
344 skb_reserve(lp->rx_skbuff[i],2);
346 /* Initilaizing receive descriptors */
347 for (i = 0; i < NUM_RX_BUFFERS; i++) {
348 lp->rx_dma_addr[i] = pci_map_single(lp->pci_dev,
349 lp->rx_skbuff[i]->data,lp->rx_buff_len-2, PCI_DMA_FROMDEVICE);
351 lp->rx_ring[i].buff_phy_addr = cpu_to_le32(lp->rx_dma_addr[i]);
352 lp->rx_ring[i].buff_count = cpu_to_le16(lp->rx_buff_len-2);
353 wmb();
354 lp->rx_ring[i].rx_flags = cpu_to_le16(OWN_BIT);
357 /* Initializing transmit descriptors */
358 for (i = 0; i < NUM_TX_RING_DR; i++) {
359 lp->tx_ring[i].buff_phy_addr = 0;
360 lp->tx_ring[i].tx_flags = 0;
361 lp->tx_ring[i].buff_count = 0;
364 return 0;
366 err_free_rx_ring:
368 pci_free_consistent(lp->pci_dev,
369 sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,lp->rx_ring,
370 lp->rx_ring_dma_addr);
372 err_free_tx_ring:
374 pci_free_consistent(lp->pci_dev,
375 sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,lp->tx_ring,
376 lp->tx_ring_dma_addr);
378 err_no_mem:
379 return -ENOMEM;
381 /* This function will set the interrupt coalescing according to the input arguments */
382 static int amd8111e_set_coalesce(struct net_device * dev, enum coal_mode cmod)
384 unsigned int timeout;
385 unsigned int event_count;
387 struct amd8111e_priv *lp = netdev_priv(dev);
388 void __iomem *mmio = lp->mmio;
389 struct amd8111e_coalesce_conf * coal_conf = &lp->coal_conf;
392 switch(cmod)
394 case RX_INTR_COAL :
395 timeout = coal_conf->rx_timeout;
396 event_count = coal_conf->rx_event_count;
397 if( timeout > MAX_TIMEOUT ||
398 event_count > MAX_EVENT_COUNT )
399 return -EINVAL;
401 timeout = timeout * DELAY_TIMER_CONV;
402 writel(VAL0|STINTEN, mmio+INTEN0);
403 writel((u32)DLY_INT_A_R0|( event_count<< 16 )|timeout,
404 mmio+DLY_INT_A);
405 break;
407 case TX_INTR_COAL :
408 timeout = coal_conf->tx_timeout;
409 event_count = coal_conf->tx_event_count;
410 if( timeout > MAX_TIMEOUT ||
411 event_count > MAX_EVENT_COUNT )
412 return -EINVAL;
415 timeout = timeout * DELAY_TIMER_CONV;
416 writel(VAL0|STINTEN,mmio+INTEN0);
417 writel((u32)DLY_INT_B_T0|( event_count<< 16 )|timeout,
418 mmio+DLY_INT_B);
419 break;
421 case DISABLE_COAL:
422 writel(0,mmio+STVAL);
423 writel(STINTEN, mmio+INTEN0);
424 writel(0, mmio +DLY_INT_B);
425 writel(0, mmio+DLY_INT_A);
426 break;
427 case ENABLE_COAL:
428 /* Start the timer */
429 writel((u32)SOFT_TIMER_FREQ, mmio+STVAL); /* 0.5 sec */
430 writel(VAL0|STINTEN, mmio+INTEN0);
431 break;
432 default:
433 break;
436 return 0;
441 This function initializes the device registers and starts the device.
443 static int amd8111e_restart(struct net_device *dev)
445 struct amd8111e_priv *lp = netdev_priv(dev);
446 void __iomem *mmio = lp->mmio;
447 int i,reg_val;
449 /* stop the chip */
450 writel(RUN, mmio + CMD0);
452 if(amd8111e_init_ring(dev))
453 return -ENOMEM;
455 /* enable the port manager and set auto negotiation always */
456 writel((u32) VAL1|EN_PMGR, mmio + CMD3 );
457 writel((u32)XPHYANE|XPHYRST , mmio + CTRL2);
459 amd8111e_set_ext_phy(dev);
461 /* set control registers */
462 reg_val = readl(mmio + CTRL1);
463 reg_val &= ~XMTSP_MASK;
464 writel( reg_val| XMTSP_128 | CACHE_ALIGN, mmio + CTRL1 );
466 /* enable interrupt */
467 writel( APINT5EN | APINT4EN | APINT3EN | APINT2EN | APINT1EN |
468 APINT0EN | MIIPDTINTEN | MCCIINTEN | MCCINTEN | MREINTEN |
469 SPNDINTEN | MPINTEN | SINTEN | STINTEN, mmio + INTEN0);
471 writel(VAL3 | LCINTEN | VAL1 | TINTEN0 | VAL0 | RINTEN0, mmio + INTEN0);
473 /* initialize tx and rx ring base addresses */
474 writel((u32)lp->tx_ring_dma_addr,mmio + XMT_RING_BASE_ADDR0);
475 writel((u32)lp->rx_ring_dma_addr,mmio+ RCV_RING_BASE_ADDR0);
477 writew((u32)NUM_TX_RING_DR, mmio + XMT_RING_LEN0);
478 writew((u16)NUM_RX_RING_DR, mmio + RCV_RING_LEN0);
480 /* set default IPG to 96 */
481 writew((u32)DEFAULT_IPG,mmio+IPG);
482 writew((u32)(DEFAULT_IPG-IFS1_DELTA), mmio + IFS1);
484 if(lp->options & OPTION_JUMBO_ENABLE){
485 writel((u32)VAL2|JUMBO, mmio + CMD3);
486 /* Reset REX_UFLO */
487 writel( REX_UFLO, mmio + CMD2);
488 /* Should not set REX_UFLO for jumbo frames */
489 writel( VAL0 | APAD_XMT|REX_RTRY , mmio + CMD2);
490 }else{
491 writel( VAL0 | APAD_XMT | REX_RTRY|REX_UFLO, mmio + CMD2);
492 writel((u32)JUMBO, mmio + CMD3);
495 #if AMD8111E_VLAN_TAG_USED
496 writel((u32) VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3);
497 #endif
498 writel( VAL0 | APAD_XMT | REX_RTRY, mmio + CMD2 );
500 /* Setting the MAC address to the device */
501 for(i = 0; i < ETH_ADDR_LEN; i++)
502 writeb( dev->dev_addr[i], mmio + PADR + i );
504 /* Enable interrupt coalesce */
505 if(lp->options & OPTION_INTR_COAL_ENABLE){
506 printk(KERN_INFO "%s: Interrupt Coalescing Enabled.\n",
507 dev->name);
508 amd8111e_set_coalesce(dev,ENABLE_COAL);
511 /* set RUN bit to start the chip */
512 writel(VAL2 | RDMD0, mmio + CMD0);
513 writel(VAL0 | INTREN | RUN, mmio + CMD0);
515 /* To avoid PCI posting bug */
516 readl(mmio+CMD0);
517 return 0;
520 This function clears necessary the device registers.
522 static void amd8111e_init_hw_default( struct amd8111e_priv* lp)
524 unsigned int reg_val;
525 unsigned int logic_filter[2] ={0,};
526 void __iomem *mmio = lp->mmio;
529 /* stop the chip */
530 writel(RUN, mmio + CMD0);
532 /* AUTOPOLL0 Register *//*TBD default value is 8100 in FPS */
533 writew( 0x8100 | lp->ext_phy_addr, mmio + AUTOPOLL0);
535 /* Clear RCV_RING_BASE_ADDR */
536 writel(0, mmio + RCV_RING_BASE_ADDR0);
538 /* Clear XMT_RING_BASE_ADDR */
539 writel(0, mmio + XMT_RING_BASE_ADDR0);
540 writel(0, mmio + XMT_RING_BASE_ADDR1);
541 writel(0, mmio + XMT_RING_BASE_ADDR2);
542 writel(0, mmio + XMT_RING_BASE_ADDR3);
544 /* Clear CMD0 */
545 writel(CMD0_CLEAR,mmio + CMD0);
547 /* Clear CMD2 */
548 writel(CMD2_CLEAR, mmio +CMD2);
550 /* Clear CMD7 */
551 writel(CMD7_CLEAR , mmio + CMD7);
553 /* Clear DLY_INT_A and DLY_INT_B */
554 writel(0x0, mmio + DLY_INT_A);
555 writel(0x0, mmio + DLY_INT_B);
557 /* Clear FLOW_CONTROL */
558 writel(0x0, mmio + FLOW_CONTROL);
560 /* Clear INT0 write 1 to clear register */
561 reg_val = readl(mmio + INT0);
562 writel(reg_val, mmio + INT0);
564 /* Clear STVAL */
565 writel(0x0, mmio + STVAL);
567 /* Clear INTEN0 */
568 writel( INTEN0_CLEAR, mmio + INTEN0);
570 /* Clear LADRF */
571 writel(0x0 , mmio + LADRF);
573 /* Set SRAM_SIZE & SRAM_BOUNDARY registers */
574 writel( 0x80010,mmio + SRAM_SIZE);
576 /* Clear RCV_RING0_LEN */
577 writel(0x0, mmio + RCV_RING_LEN0);
579 /* Clear XMT_RING0/1/2/3_LEN */
580 writel(0x0, mmio + XMT_RING_LEN0);
581 writel(0x0, mmio + XMT_RING_LEN1);
582 writel(0x0, mmio + XMT_RING_LEN2);
583 writel(0x0, mmio + XMT_RING_LEN3);
585 /* Clear XMT_RING_LIMIT */
586 writel(0x0, mmio + XMT_RING_LIMIT);
588 /* Clear MIB */
589 writew(MIB_CLEAR, mmio + MIB_ADDR);
591 /* Clear LARF */
592 amd8111e_writeq(*(u64*)logic_filter,mmio+LADRF);
594 /* SRAM_SIZE register */
595 reg_val = readl(mmio + SRAM_SIZE);
597 if(lp->options & OPTION_JUMBO_ENABLE)
598 writel( VAL2|JUMBO, mmio + CMD3);
599 #if AMD8111E_VLAN_TAG_USED
600 writel(VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3 );
601 #endif
602 /* Set default value to CTRL1 Register */
603 writel(CTRL1_DEFAULT, mmio + CTRL1);
605 /* To avoid PCI posting bug */
606 readl(mmio + CMD2);
611 This function disables the interrupt and clears all the pending
612 interrupts in INT0
614 static void amd8111e_disable_interrupt(struct amd8111e_priv* lp)
616 u32 intr0;
618 /* Disable interrupt */
619 writel(INTREN, lp->mmio + CMD0);
621 /* Clear INT0 */
622 intr0 = readl(lp->mmio + INT0);
623 writel(intr0, lp->mmio + INT0);
625 /* To avoid PCI posting bug */
626 readl(lp->mmio + INT0);
631 This function stops the chip.
633 static void amd8111e_stop_chip(struct amd8111e_priv* lp)
635 writel(RUN, lp->mmio + CMD0);
637 /* To avoid PCI posting bug */
638 readl(lp->mmio + CMD0);
642 This function frees the transmiter and receiver descriptor rings.
644 static void amd8111e_free_ring(struct amd8111e_priv* lp)
646 /* Free transmit and receive descriptor rings */
647 if(lp->rx_ring){
648 pci_free_consistent(lp->pci_dev,
649 sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,
650 lp->rx_ring, lp->rx_ring_dma_addr);
651 lp->rx_ring = NULL;
654 if(lp->tx_ring){
655 pci_free_consistent(lp->pci_dev,
656 sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,
657 lp->tx_ring, lp->tx_ring_dma_addr);
659 lp->tx_ring = NULL;
663 #if AMD8111E_VLAN_TAG_USED
665 This is the receive indication function for packets with vlan tag.
667 static int amd8111e_vlan_rx(struct amd8111e_priv *lp, struct sk_buff *skb, u16 vlan_tag)
669 return vlan_hwaccel_receive_skb(skb, lp->vlgrp,vlan_tag);
671 #endif
674 This function will free all the transmit skbs that are actually transmitted by the device. It will check the ownership of the skb before freeing the skb.
676 static int amd8111e_tx(struct net_device *dev)
678 struct amd8111e_priv* lp = netdev_priv(dev);
679 int tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK;
680 int status;
681 /* Complete all the transmit packet */
682 while (lp->tx_complete_idx != lp->tx_idx){
683 tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK;
684 status = le16_to_cpu(lp->tx_ring[tx_index].tx_flags);
686 if(status & OWN_BIT)
687 break; /* It still hasn't been Txed */
689 lp->tx_ring[tx_index].buff_phy_addr = 0;
691 /* We must free the original skb */
692 if (lp->tx_skbuff[tx_index]) {
693 pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[tx_index],
694 lp->tx_skbuff[tx_index]->len,
695 PCI_DMA_TODEVICE);
696 dev_kfree_skb_irq (lp->tx_skbuff[tx_index]);
697 lp->tx_skbuff[tx_index] = NULL;
698 lp->tx_dma_addr[tx_index] = 0;
700 lp->tx_complete_idx++;
701 /*COAL update tx coalescing parameters */
702 lp->coal_conf.tx_packets++;
703 lp->coal_conf.tx_bytes +=
704 le16_to_cpu(lp->tx_ring[tx_index].buff_count);
706 if (netif_queue_stopped(dev) &&
707 lp->tx_complete_idx > lp->tx_idx - NUM_TX_BUFFERS +2){
708 /* The ring is no longer full, clear tbusy. */
709 /* lp->tx_full = 0; */
710 netif_wake_queue (dev);
713 return 0;
716 /* This function handles the driver receive operation in polling mode */
717 static int amd8111e_rx_poll(struct napi_struct *napi, int budget)
719 struct amd8111e_priv *lp = container_of(napi, struct amd8111e_priv, napi);
720 struct net_device *dev = lp->amd8111e_net_dev;
721 int rx_index = lp->rx_idx & RX_RING_DR_MOD_MASK;
722 void __iomem *mmio = lp->mmio;
723 struct sk_buff *skb,*new_skb;
724 int min_pkt_len, status;
725 unsigned int intr0;
726 int num_rx_pkt = 0;
727 short pkt_len;
728 #if AMD8111E_VLAN_TAG_USED
729 short vtag;
730 #endif
731 int rx_pkt_limit = budget;
732 unsigned long flags;
735 /* process receive packets until we use the quota*/
736 /* If we own the next entry, it's a new packet. Send it up. */
737 while(1) {
738 status = le16_to_cpu(lp->rx_ring[rx_index].rx_flags);
739 if (status & OWN_BIT)
740 break;
743 * There is a tricky error noted by John Murphy,
744 * <murf@perftech.com> to Russ Nelson: Even with
745 * full-sized * buffers it's possible for a
746 * jabber packet to use two buffers, with only
747 * the last correctly noting the error.
750 if(status & ERR_BIT) {
751 /* reseting flags */
752 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
753 goto err_next_pkt;
755 /* check for STP and ENP */
756 if(!((status & STP_BIT) && (status & ENP_BIT))){
757 /* reseting flags */
758 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
759 goto err_next_pkt;
761 pkt_len = le16_to_cpu(lp->rx_ring[rx_index].msg_count) - 4;
763 #if AMD8111E_VLAN_TAG_USED
764 vtag = status & TT_MASK;
765 /*MAC will strip vlan tag*/
766 if(lp->vlgrp != NULL && vtag !=0)
767 min_pkt_len =MIN_PKT_LEN - 4;
768 else
769 #endif
770 min_pkt_len =MIN_PKT_LEN;
772 if (pkt_len < min_pkt_len) {
773 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
774 lp->drv_rx_errors++;
775 goto err_next_pkt;
777 if(--rx_pkt_limit < 0)
778 goto rx_not_empty;
779 if(!(new_skb = dev_alloc_skb(lp->rx_buff_len))){
780 /* if allocation fail,
781 ignore that pkt and go to next one */
782 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
783 lp->drv_rx_errors++;
784 goto err_next_pkt;
787 skb_reserve(new_skb, 2);
788 skb = lp->rx_skbuff[rx_index];
789 pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[rx_index],
790 lp->rx_buff_len-2, PCI_DMA_FROMDEVICE);
791 skb_put(skb, pkt_len);
792 lp->rx_skbuff[rx_index] = new_skb;
793 lp->rx_dma_addr[rx_index] = pci_map_single(lp->pci_dev,
794 new_skb->data,
795 lp->rx_buff_len-2,
796 PCI_DMA_FROMDEVICE);
798 skb->protocol = eth_type_trans(skb, dev);
800 #if AMD8111E_VLAN_TAG_USED
801 if(lp->vlgrp != NULL && (vtag == TT_VLAN_TAGGED)){
802 amd8111e_vlan_rx(lp, skb,
803 le16_to_cpu(lp->rx_ring[rx_index].tag_ctrl_info));
804 } else
805 #endif
806 netif_receive_skb(skb);
807 /*COAL update rx coalescing parameters*/
808 lp->coal_conf.rx_packets++;
809 lp->coal_conf.rx_bytes += pkt_len;
810 num_rx_pkt++;
812 err_next_pkt:
813 lp->rx_ring[rx_index].buff_phy_addr
814 = cpu_to_le32(lp->rx_dma_addr[rx_index]);
815 lp->rx_ring[rx_index].buff_count =
816 cpu_to_le16(lp->rx_buff_len-2);
817 wmb();
818 lp->rx_ring[rx_index].rx_flags |= cpu_to_le16(OWN_BIT);
819 rx_index = (++lp->rx_idx) & RX_RING_DR_MOD_MASK;
821 /* Check the interrupt status register for more packets in the
822 mean time. Process them since we have not used up our quota.*/
824 intr0 = readl(mmio + INT0);
825 /*Ack receive packets */
826 writel(intr0 & RINT0,mmio + INT0);
828 } while(intr0 & RINT0);
830 if (rx_pkt_limit > 0) {
831 /* Receive descriptor is empty now */
832 spin_lock_irqsave(&lp->lock, flags);
833 __napi_complete(napi);
834 writel(VAL0|RINTEN0, mmio + INTEN0);
835 writel(VAL2 | RDMD0, mmio + CMD0);
836 spin_unlock_irqrestore(&lp->lock, flags);
839 rx_not_empty:
840 return num_rx_pkt;
844 This function will indicate the link status to the kernel.
846 static int amd8111e_link_change(struct net_device* dev)
848 struct amd8111e_priv *lp = netdev_priv(dev);
849 int status0,speed;
851 /* read the link change */
852 status0 = readl(lp->mmio + STAT0);
854 if(status0 & LINK_STATS){
855 if(status0 & AUTONEG_COMPLETE)
856 lp->link_config.autoneg = AUTONEG_ENABLE;
857 else
858 lp->link_config.autoneg = AUTONEG_DISABLE;
860 if(status0 & FULL_DPLX)
861 lp->link_config.duplex = DUPLEX_FULL;
862 else
863 lp->link_config.duplex = DUPLEX_HALF;
864 speed = (status0 & SPEED_MASK) >> 7;
865 if(speed == PHY_SPEED_10)
866 lp->link_config.speed = SPEED_10;
867 else if(speed == PHY_SPEED_100)
868 lp->link_config.speed = SPEED_100;
870 printk(KERN_INFO "%s: Link is Up. Speed is %s Mbps %s Duplex\n", dev->name,
871 (lp->link_config.speed == SPEED_100) ? "100": "10",
872 (lp->link_config.duplex == DUPLEX_FULL)? "Full": "Half");
873 netif_carrier_on(dev);
875 else{
876 lp->link_config.speed = SPEED_INVALID;
877 lp->link_config.duplex = DUPLEX_INVALID;
878 lp->link_config.autoneg = AUTONEG_INVALID;
879 printk(KERN_INFO "%s: Link is Down.\n",dev->name);
880 netif_carrier_off(dev);
883 return 0;
886 This function reads the mib counters.
888 static int amd8111e_read_mib(void __iomem *mmio, u8 MIB_COUNTER)
890 unsigned int status;
891 unsigned int data;
892 unsigned int repeat = REPEAT_CNT;
894 writew( MIB_RD_CMD | MIB_COUNTER, mmio + MIB_ADDR);
895 do {
896 status = readw(mmio + MIB_ADDR);
897 udelay(2); /* controller takes MAX 2 us to get mib data */
899 while (--repeat && (status & MIB_CMD_ACTIVE));
901 data = readl(mmio + MIB_DATA);
902 return data;
906 This function reads the mib registers and returns the hardware statistics. It updates previous internal driver statistics with new values.
908 static struct net_device_stats *amd8111e_get_stats(struct net_device * dev)
910 struct amd8111e_priv *lp = netdev_priv(dev);
911 void __iomem *mmio = lp->mmio;
912 unsigned long flags;
913 /* struct net_device_stats *prev_stats = &lp->prev_stats; */
914 struct net_device_stats* new_stats = &lp->stats;
916 if(!lp->opened)
917 return &lp->stats;
918 spin_lock_irqsave (&lp->lock, flags);
920 /* stats.rx_packets */
921 new_stats->rx_packets = amd8111e_read_mib(mmio, rcv_broadcast_pkts)+
922 amd8111e_read_mib(mmio, rcv_multicast_pkts)+
923 amd8111e_read_mib(mmio, rcv_unicast_pkts);
925 /* stats.tx_packets */
926 new_stats->tx_packets = amd8111e_read_mib(mmio, xmt_packets);
928 /*stats.rx_bytes */
929 new_stats->rx_bytes = amd8111e_read_mib(mmio, rcv_octets);
931 /* stats.tx_bytes */
932 new_stats->tx_bytes = amd8111e_read_mib(mmio, xmt_octets);
934 /* stats.rx_errors */
935 /* hw errors + errors driver reported */
936 new_stats->rx_errors = amd8111e_read_mib(mmio, rcv_undersize_pkts)+
937 amd8111e_read_mib(mmio, rcv_fragments)+
938 amd8111e_read_mib(mmio, rcv_jabbers)+
939 amd8111e_read_mib(mmio, rcv_alignment_errors)+
940 amd8111e_read_mib(mmio, rcv_fcs_errors)+
941 amd8111e_read_mib(mmio, rcv_miss_pkts)+
942 lp->drv_rx_errors;
944 /* stats.tx_errors */
945 new_stats->tx_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts);
947 /* stats.rx_dropped*/
948 new_stats->rx_dropped = amd8111e_read_mib(mmio, rcv_miss_pkts);
950 /* stats.tx_dropped*/
951 new_stats->tx_dropped = amd8111e_read_mib(mmio, xmt_underrun_pkts);
953 /* stats.multicast*/
954 new_stats->multicast = amd8111e_read_mib(mmio, rcv_multicast_pkts);
956 /* stats.collisions*/
957 new_stats->collisions = amd8111e_read_mib(mmio, xmt_collisions);
959 /* stats.rx_length_errors*/
960 new_stats->rx_length_errors =
961 amd8111e_read_mib(mmio, rcv_undersize_pkts)+
962 amd8111e_read_mib(mmio, rcv_oversize_pkts);
964 /* stats.rx_over_errors*/
965 new_stats->rx_over_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
967 /* stats.rx_crc_errors*/
968 new_stats->rx_crc_errors = amd8111e_read_mib(mmio, rcv_fcs_errors);
970 /* stats.rx_frame_errors*/
971 new_stats->rx_frame_errors =
972 amd8111e_read_mib(mmio, rcv_alignment_errors);
974 /* stats.rx_fifo_errors */
975 new_stats->rx_fifo_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
977 /* stats.rx_missed_errors */
978 new_stats->rx_missed_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
980 /* stats.tx_aborted_errors*/
981 new_stats->tx_aborted_errors =
982 amd8111e_read_mib(mmio, xmt_excessive_collision);
984 /* stats.tx_carrier_errors*/
985 new_stats->tx_carrier_errors =
986 amd8111e_read_mib(mmio, xmt_loss_carrier);
988 /* stats.tx_fifo_errors*/
989 new_stats->tx_fifo_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts);
991 /* stats.tx_window_errors*/
992 new_stats->tx_window_errors =
993 amd8111e_read_mib(mmio, xmt_late_collision);
995 /* Reset the mibs for collecting new statistics */
996 /* writew(MIB_CLEAR, mmio + MIB_ADDR);*/
998 spin_unlock_irqrestore (&lp->lock, flags);
1000 return new_stats;
1002 /* This function recalculate the interrupt coalescing mode on every interrupt
1003 according to the datarate and the packet rate.
1005 static int amd8111e_calc_coalesce(struct net_device *dev)
1007 struct amd8111e_priv *lp = netdev_priv(dev);
1008 struct amd8111e_coalesce_conf * coal_conf = &lp->coal_conf;
1009 int tx_pkt_rate;
1010 int rx_pkt_rate;
1011 int tx_data_rate;
1012 int rx_data_rate;
1013 int rx_pkt_size;
1014 int tx_pkt_size;
1016 tx_pkt_rate = coal_conf->tx_packets - coal_conf->tx_prev_packets;
1017 coal_conf->tx_prev_packets = coal_conf->tx_packets;
1019 tx_data_rate = coal_conf->tx_bytes - coal_conf->tx_prev_bytes;
1020 coal_conf->tx_prev_bytes = coal_conf->tx_bytes;
1022 rx_pkt_rate = coal_conf->rx_packets - coal_conf->rx_prev_packets;
1023 coal_conf->rx_prev_packets = coal_conf->rx_packets;
1025 rx_data_rate = coal_conf->rx_bytes - coal_conf->rx_prev_bytes;
1026 coal_conf->rx_prev_bytes = coal_conf->rx_bytes;
1028 if(rx_pkt_rate < 800){
1029 if(coal_conf->rx_coal_type != NO_COALESCE){
1031 coal_conf->rx_timeout = 0x0;
1032 coal_conf->rx_event_count = 0;
1033 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1034 coal_conf->rx_coal_type = NO_COALESCE;
1037 else{
1039 rx_pkt_size = rx_data_rate/rx_pkt_rate;
1040 if (rx_pkt_size < 128){
1041 if(coal_conf->rx_coal_type != NO_COALESCE){
1043 coal_conf->rx_timeout = 0;
1044 coal_conf->rx_event_count = 0;
1045 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1046 coal_conf->rx_coal_type = NO_COALESCE;
1050 else if ( (rx_pkt_size >= 128) && (rx_pkt_size < 512) ){
1052 if(coal_conf->rx_coal_type != LOW_COALESCE){
1053 coal_conf->rx_timeout = 1;
1054 coal_conf->rx_event_count = 4;
1055 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1056 coal_conf->rx_coal_type = LOW_COALESCE;
1059 else if ((rx_pkt_size >= 512) && (rx_pkt_size < 1024)){
1061 if(coal_conf->rx_coal_type != MEDIUM_COALESCE){
1062 coal_conf->rx_timeout = 1;
1063 coal_conf->rx_event_count = 4;
1064 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1065 coal_conf->rx_coal_type = MEDIUM_COALESCE;
1069 else if(rx_pkt_size >= 1024){
1070 if(coal_conf->rx_coal_type != HIGH_COALESCE){
1071 coal_conf->rx_timeout = 2;
1072 coal_conf->rx_event_count = 3;
1073 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1074 coal_conf->rx_coal_type = HIGH_COALESCE;
1078 /* NOW FOR TX INTR COALESC */
1079 if(tx_pkt_rate < 800){
1080 if(coal_conf->tx_coal_type != NO_COALESCE){
1082 coal_conf->tx_timeout = 0x0;
1083 coal_conf->tx_event_count = 0;
1084 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1085 coal_conf->tx_coal_type = NO_COALESCE;
1088 else{
1090 tx_pkt_size = tx_data_rate/tx_pkt_rate;
1091 if (tx_pkt_size < 128){
1093 if(coal_conf->tx_coal_type != NO_COALESCE){
1095 coal_conf->tx_timeout = 0;
1096 coal_conf->tx_event_count = 0;
1097 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1098 coal_conf->tx_coal_type = NO_COALESCE;
1102 else if ( (tx_pkt_size >= 128) && (tx_pkt_size < 512) ){
1104 if(coal_conf->tx_coal_type != LOW_COALESCE){
1105 coal_conf->tx_timeout = 1;
1106 coal_conf->tx_event_count = 2;
1107 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1108 coal_conf->tx_coal_type = LOW_COALESCE;
1112 else if ((tx_pkt_size >= 512) && (tx_pkt_size < 1024)){
1114 if(coal_conf->tx_coal_type != MEDIUM_COALESCE){
1115 coal_conf->tx_timeout = 2;
1116 coal_conf->tx_event_count = 5;
1117 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1118 coal_conf->tx_coal_type = MEDIUM_COALESCE;
1122 else if(tx_pkt_size >= 1024){
1123 if (tx_pkt_size >= 1024){
1124 if(coal_conf->tx_coal_type != HIGH_COALESCE){
1125 coal_conf->tx_timeout = 4;
1126 coal_conf->tx_event_count = 8;
1127 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1128 coal_conf->tx_coal_type = HIGH_COALESCE;
1133 return 0;
1137 This is device interrupt function. It handles transmit, receive,link change and hardware timer interrupts.
1139 static irqreturn_t amd8111e_interrupt(int irq, void *dev_id)
1142 struct net_device * dev = (struct net_device *) dev_id;
1143 struct amd8111e_priv *lp = netdev_priv(dev);
1144 void __iomem *mmio = lp->mmio;
1145 unsigned int intr0, intren0;
1146 unsigned int handled = 1;
1148 if(unlikely(dev == NULL))
1149 return IRQ_NONE;
1151 spin_lock(&lp->lock);
1153 /* disabling interrupt */
1154 writel(INTREN, mmio + CMD0);
1156 /* Read interrupt status */
1157 intr0 = readl(mmio + INT0);
1158 intren0 = readl(mmio + INTEN0);
1160 /* Process all the INT event until INTR bit is clear. */
1162 if (!(intr0 & INTR)){
1163 handled = 0;
1164 goto err_no_interrupt;
1167 /* Current driver processes 4 interrupts : RINT,TINT,LCINT,STINT */
1168 writel(intr0, mmio + INT0);
1170 /* Check if Receive Interrupt has occurred. */
1171 if (intr0 & RINT0) {
1172 if (napi_schedule_prep(&lp->napi)) {
1173 /* Disable receive interupts */
1174 writel(RINTEN0, mmio + INTEN0);
1175 /* Schedule a polling routine */
1176 __napi_schedule(&lp->napi);
1177 } else if (intren0 & RINTEN0) {
1178 printk("************Driver bug! interrupt while in poll\n");
1179 /* Fix by disable receive interrupts */
1180 writel(RINTEN0, mmio + INTEN0);
1184 /* Check if Transmit Interrupt has occurred. */
1185 if (intr0 & TINT0)
1186 amd8111e_tx(dev);
1188 /* Check if Link Change Interrupt has occurred. */
1189 if (intr0 & LCINT)
1190 amd8111e_link_change(dev);
1192 /* Check if Hardware Timer Interrupt has occurred. */
1193 if (intr0 & STINT)
1194 amd8111e_calc_coalesce(dev);
1196 err_no_interrupt:
1197 writel( VAL0 | INTREN,mmio + CMD0);
1199 spin_unlock(&lp->lock);
1201 return IRQ_RETVAL(handled);
1204 #ifdef CONFIG_NET_POLL_CONTROLLER
1205 static void amd8111e_poll(struct net_device *dev)
1207 unsigned long flags;
1208 local_irq_save(flags);
1209 amd8111e_interrupt(0, dev);
1210 local_irq_restore(flags);
1212 #endif
1216 This function closes the network interface and updates the statistics so that most recent statistics will be available after the interface is down.
1218 static int amd8111e_close(struct net_device * dev)
1220 struct amd8111e_priv *lp = netdev_priv(dev);
1221 netif_stop_queue(dev);
1223 napi_disable(&lp->napi);
1225 spin_lock_irq(&lp->lock);
1227 amd8111e_disable_interrupt(lp);
1228 amd8111e_stop_chip(lp);
1230 /* Free transmit and receive skbs */
1231 amd8111e_free_skbs(lp->amd8111e_net_dev);
1233 netif_carrier_off(lp->amd8111e_net_dev);
1235 /* Delete ipg timer */
1236 if(lp->options & OPTION_DYN_IPG_ENABLE)
1237 del_timer_sync(&lp->ipg_data.ipg_timer);
1239 spin_unlock_irq(&lp->lock);
1240 free_irq(dev->irq, dev);
1241 amd8111e_free_ring(lp);
1243 /* Update the statistics before closing */
1244 amd8111e_get_stats(dev);
1245 lp->opened = 0;
1246 return 0;
1248 /* This function opens new interface.It requests irq for the device, initializes the device,buffers and descriptors, and starts the device.
1250 static int amd8111e_open(struct net_device * dev )
1252 struct amd8111e_priv *lp = netdev_priv(dev);
1254 if(dev->irq ==0 || request_irq(dev->irq, amd8111e_interrupt, IRQF_SHARED,
1255 dev->name, dev))
1256 return -EAGAIN;
1258 napi_enable(&lp->napi);
1260 spin_lock_irq(&lp->lock);
1262 amd8111e_init_hw_default(lp);
1264 if(amd8111e_restart(dev)){
1265 spin_unlock_irq(&lp->lock);
1266 napi_disable(&lp->napi);
1267 if (dev->irq)
1268 free_irq(dev->irq, dev);
1269 return -ENOMEM;
1271 /* Start ipg timer */
1272 if(lp->options & OPTION_DYN_IPG_ENABLE){
1273 add_timer(&lp->ipg_data.ipg_timer);
1274 printk(KERN_INFO "%s: Dynamic IPG Enabled.\n",dev->name);
1277 lp->opened = 1;
1279 spin_unlock_irq(&lp->lock);
1281 netif_start_queue(dev);
1283 return 0;
1286 This function checks if there is any transmit descriptors available to queue more packet.
1288 static int amd8111e_tx_queue_avail(struct amd8111e_priv* lp )
1290 int tx_index = lp->tx_idx & TX_BUFF_MOD_MASK;
1291 if (lp->tx_skbuff[tx_index])
1292 return -1;
1293 else
1294 return 0;
1298 This function will queue the transmit packets to the descriptors and will trigger the send operation. It also initializes the transmit descriptors with buffer physical address, byte count, ownership to hardware etc.
1301 static netdev_tx_t amd8111e_start_xmit(struct sk_buff *skb,
1302 struct net_device * dev)
1304 struct amd8111e_priv *lp = netdev_priv(dev);
1305 int tx_index;
1306 unsigned long flags;
1308 spin_lock_irqsave(&lp->lock, flags);
1310 tx_index = lp->tx_idx & TX_RING_DR_MOD_MASK;
1312 lp->tx_ring[tx_index].buff_count = cpu_to_le16(skb->len);
1314 lp->tx_skbuff[tx_index] = skb;
1315 lp->tx_ring[tx_index].tx_flags = 0;
1317 #if AMD8111E_VLAN_TAG_USED
1318 if((lp->vlgrp != NULL) && vlan_tx_tag_present(skb)){
1319 lp->tx_ring[tx_index].tag_ctrl_cmd |=
1320 cpu_to_le16(TCC_VLAN_INSERT);
1321 lp->tx_ring[tx_index].tag_ctrl_info =
1322 cpu_to_le16(vlan_tx_tag_get(skb));
1325 #endif
1326 lp->tx_dma_addr[tx_index] =
1327 pci_map_single(lp->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE);
1328 lp->tx_ring[tx_index].buff_phy_addr =
1329 cpu_to_le32(lp->tx_dma_addr[tx_index]);
1331 /* Set FCS and LTINT bits */
1332 wmb();
1333 lp->tx_ring[tx_index].tx_flags |=
1334 cpu_to_le16(OWN_BIT | STP_BIT | ENP_BIT|ADD_FCS_BIT|LTINT_BIT);
1336 lp->tx_idx++;
1338 /* Trigger an immediate send poll. */
1339 writel( VAL1 | TDMD0, lp->mmio + CMD0);
1340 writel( VAL2 | RDMD0,lp->mmio + CMD0);
1342 if(amd8111e_tx_queue_avail(lp) < 0){
1343 netif_stop_queue(dev);
1345 spin_unlock_irqrestore(&lp->lock, flags);
1346 return NETDEV_TX_OK;
1349 This function returns all the memory mapped registers of the device.
1351 static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf)
1353 void __iomem *mmio = lp->mmio;
1354 /* Read only necessary registers */
1355 buf[0] = readl(mmio + XMT_RING_BASE_ADDR0);
1356 buf[1] = readl(mmio + XMT_RING_LEN0);
1357 buf[2] = readl(mmio + RCV_RING_BASE_ADDR0);
1358 buf[3] = readl(mmio + RCV_RING_LEN0);
1359 buf[4] = readl(mmio + CMD0);
1360 buf[5] = readl(mmio + CMD2);
1361 buf[6] = readl(mmio + CMD3);
1362 buf[7] = readl(mmio + CMD7);
1363 buf[8] = readl(mmio + INT0);
1364 buf[9] = readl(mmio + INTEN0);
1365 buf[10] = readl(mmio + LADRF);
1366 buf[11] = readl(mmio + LADRF+4);
1367 buf[12] = readl(mmio + STAT0);
1372 This function sets promiscuos mode, all-multi mode or the multicast address
1373 list to the device.
1375 static void amd8111e_set_multicast_list(struct net_device *dev)
1377 struct netdev_hw_addr *ha;
1378 struct amd8111e_priv *lp = netdev_priv(dev);
1379 u32 mc_filter[2] ;
1380 int bit_num;
1382 if(dev->flags & IFF_PROMISC){
1383 writel( VAL2 | PROM, lp->mmio + CMD2);
1384 return;
1386 else
1387 writel( PROM, lp->mmio + CMD2);
1388 if (dev->flags & IFF_ALLMULTI ||
1389 netdev_mc_count(dev) > MAX_FILTER_SIZE) {
1390 /* get all multicast packet */
1391 mc_filter[1] = mc_filter[0] = 0xffffffff;
1392 lp->options |= OPTION_MULTICAST_ENABLE;
1393 amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF);
1394 return;
1396 if (netdev_mc_empty(dev)) {
1397 /* get only own packets */
1398 mc_filter[1] = mc_filter[0] = 0;
1399 lp->options &= ~OPTION_MULTICAST_ENABLE;
1400 amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF);
1401 /* disable promiscous mode */
1402 writel(PROM, lp->mmio + CMD2);
1403 return;
1405 /* load all the multicast addresses in the logic filter */
1406 lp->options |= OPTION_MULTICAST_ENABLE;
1407 mc_filter[1] = mc_filter[0] = 0;
1408 netdev_for_each_mc_addr(ha, dev) {
1409 bit_num = (ether_crc_le(ETH_ALEN, ha->addr) >> 26) & 0x3f;
1410 mc_filter[bit_num >> 5] |= 1 << (bit_num & 31);
1412 amd8111e_writeq(*(u64*)mc_filter,lp->mmio+ LADRF);
1414 /* To eliminate PCI posting bug */
1415 readl(lp->mmio + CMD2);
1419 static void amd8111e_get_drvinfo(struct net_device* dev, struct ethtool_drvinfo *info)
1421 struct amd8111e_priv *lp = netdev_priv(dev);
1422 struct pci_dev *pci_dev = lp->pci_dev;
1423 strcpy (info->driver, MODULE_NAME);
1424 strcpy (info->version, MODULE_VERS);
1425 sprintf(info->fw_version,"%u",chip_version);
1426 strcpy (info->bus_info, pci_name(pci_dev));
1429 static int amd8111e_get_regs_len(struct net_device *dev)
1431 return AMD8111E_REG_DUMP_LEN;
1434 static void amd8111e_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf)
1436 struct amd8111e_priv *lp = netdev_priv(dev);
1437 regs->version = 0;
1438 amd8111e_read_regs(lp, buf);
1441 static int amd8111e_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
1443 struct amd8111e_priv *lp = netdev_priv(dev);
1444 spin_lock_irq(&lp->lock);
1445 mii_ethtool_gset(&lp->mii_if, ecmd);
1446 spin_unlock_irq(&lp->lock);
1447 return 0;
1450 static int amd8111e_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
1452 struct amd8111e_priv *lp = netdev_priv(dev);
1453 int res;
1454 spin_lock_irq(&lp->lock);
1455 res = mii_ethtool_sset(&lp->mii_if, ecmd);
1456 spin_unlock_irq(&lp->lock);
1457 return res;
1460 static int amd8111e_nway_reset(struct net_device *dev)
1462 struct amd8111e_priv *lp = netdev_priv(dev);
1463 return mii_nway_restart(&lp->mii_if);
1466 static u32 amd8111e_get_link(struct net_device *dev)
1468 struct amd8111e_priv *lp = netdev_priv(dev);
1469 return mii_link_ok(&lp->mii_if);
1472 static void amd8111e_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info)
1474 struct amd8111e_priv *lp = netdev_priv(dev);
1475 wol_info->supported = WAKE_MAGIC|WAKE_PHY;
1476 if (lp->options & OPTION_WOL_ENABLE)
1477 wol_info->wolopts = WAKE_MAGIC;
1480 static int amd8111e_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info)
1482 struct amd8111e_priv *lp = netdev_priv(dev);
1483 if (wol_info->wolopts & ~(WAKE_MAGIC|WAKE_PHY))
1484 return -EINVAL;
1485 spin_lock_irq(&lp->lock);
1486 if (wol_info->wolopts & WAKE_MAGIC)
1487 lp->options |=
1488 (OPTION_WOL_ENABLE | OPTION_WAKE_MAGIC_ENABLE);
1489 else if(wol_info->wolopts & WAKE_PHY)
1490 lp->options |=
1491 (OPTION_WOL_ENABLE | OPTION_WAKE_PHY_ENABLE);
1492 else
1493 lp->options &= ~OPTION_WOL_ENABLE;
1494 spin_unlock_irq(&lp->lock);
1495 return 0;
1498 static const struct ethtool_ops ops = {
1499 .get_drvinfo = amd8111e_get_drvinfo,
1500 .get_regs_len = amd8111e_get_regs_len,
1501 .get_regs = amd8111e_get_regs,
1502 .get_settings = amd8111e_get_settings,
1503 .set_settings = amd8111e_set_settings,
1504 .nway_reset = amd8111e_nway_reset,
1505 .get_link = amd8111e_get_link,
1506 .get_wol = amd8111e_get_wol,
1507 .set_wol = amd8111e_set_wol,
1511 This function handles all the ethtool ioctls. It gives driver info, gets/sets driver speed, gets memory mapped register values, forces auto negotiation, sets/gets WOL options for ethtool application.
1514 static int amd8111e_ioctl(struct net_device * dev , struct ifreq *ifr, int cmd)
1516 struct mii_ioctl_data *data = if_mii(ifr);
1517 struct amd8111e_priv *lp = netdev_priv(dev);
1518 int err;
1519 u32 mii_regval;
1521 switch(cmd) {
1522 case SIOCGMIIPHY:
1523 data->phy_id = lp->ext_phy_addr;
1525 /* fallthru */
1526 case SIOCGMIIREG:
1528 spin_lock_irq(&lp->lock);
1529 err = amd8111e_read_phy(lp, data->phy_id,
1530 data->reg_num & PHY_REG_ADDR_MASK, &mii_regval);
1531 spin_unlock_irq(&lp->lock);
1533 data->val_out = mii_regval;
1534 return err;
1536 case SIOCSMIIREG:
1538 spin_lock_irq(&lp->lock);
1539 err = amd8111e_write_phy(lp, data->phy_id,
1540 data->reg_num & PHY_REG_ADDR_MASK, data->val_in);
1541 spin_unlock_irq(&lp->lock);
1543 return err;
1545 default:
1546 /* do nothing */
1547 break;
1549 return -EOPNOTSUPP;
1551 static int amd8111e_set_mac_address(struct net_device *dev, void *p)
1553 struct amd8111e_priv *lp = netdev_priv(dev);
1554 int i;
1555 struct sockaddr *addr = p;
1557 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
1558 spin_lock_irq(&lp->lock);
1559 /* Setting the MAC address to the device */
1560 for(i = 0; i < ETH_ADDR_LEN; i++)
1561 writeb( dev->dev_addr[i], lp->mmio + PADR + i );
1563 spin_unlock_irq(&lp->lock);
1565 return 0;
1569 This function changes the mtu of the device. It restarts the device to initialize the descriptor with new receive buffers.
1571 static int amd8111e_change_mtu(struct net_device *dev, int new_mtu)
1573 struct amd8111e_priv *lp = netdev_priv(dev);
1574 int err;
1576 if ((new_mtu < AMD8111E_MIN_MTU) || (new_mtu > AMD8111E_MAX_MTU))
1577 return -EINVAL;
1579 if (!netif_running(dev)) {
1580 /* new_mtu will be used
1581 when device starts netxt time */
1582 dev->mtu = new_mtu;
1583 return 0;
1586 spin_lock_irq(&lp->lock);
1588 /* stop the chip */
1589 writel(RUN, lp->mmio + CMD0);
1591 dev->mtu = new_mtu;
1593 err = amd8111e_restart(dev);
1594 spin_unlock_irq(&lp->lock);
1595 if(!err)
1596 netif_start_queue(dev);
1597 return err;
1600 #if AMD8111E_VLAN_TAG_USED
1601 static void amd8111e_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
1603 struct amd8111e_priv *lp = netdev_priv(dev);
1604 spin_lock_irq(&lp->lock);
1605 lp->vlgrp = grp;
1606 spin_unlock_irq(&lp->lock);
1608 #endif
1610 static int amd8111e_enable_magicpkt(struct amd8111e_priv* lp)
1612 writel( VAL1|MPPLBA, lp->mmio + CMD3);
1613 writel( VAL0|MPEN_SW, lp->mmio + CMD7);
1615 /* To eliminate PCI posting bug */
1616 readl(lp->mmio + CMD7);
1617 return 0;
1620 static int amd8111e_enable_link_change(struct amd8111e_priv* lp)
1623 /* Adapter is already stoped/suspended/interrupt-disabled */
1624 writel(VAL0|LCMODE_SW,lp->mmio + CMD7);
1626 /* To eliminate PCI posting bug */
1627 readl(lp->mmio + CMD7);
1628 return 0;
1632 * This function is called when a packet transmission fails to complete
1633 * within a reasonable period, on the assumption that an interrupt have
1634 * failed or the interface is locked up. This function will reinitialize
1635 * the hardware.
1637 static void amd8111e_tx_timeout(struct net_device *dev)
1639 struct amd8111e_priv* lp = netdev_priv(dev);
1640 int err;
1642 printk(KERN_ERR "%s: transmit timed out, resetting\n",
1643 dev->name);
1644 spin_lock_irq(&lp->lock);
1645 err = amd8111e_restart(dev);
1646 spin_unlock_irq(&lp->lock);
1647 if(!err)
1648 netif_wake_queue(dev);
1650 static int amd8111e_suspend(struct pci_dev *pci_dev, pm_message_t state)
1652 struct net_device *dev = pci_get_drvdata(pci_dev);
1653 struct amd8111e_priv *lp = netdev_priv(dev);
1655 if (!netif_running(dev))
1656 return 0;
1658 /* disable the interrupt */
1659 spin_lock_irq(&lp->lock);
1660 amd8111e_disable_interrupt(lp);
1661 spin_unlock_irq(&lp->lock);
1663 netif_device_detach(dev);
1665 /* stop chip */
1666 spin_lock_irq(&lp->lock);
1667 if(lp->options & OPTION_DYN_IPG_ENABLE)
1668 del_timer_sync(&lp->ipg_data.ipg_timer);
1669 amd8111e_stop_chip(lp);
1670 spin_unlock_irq(&lp->lock);
1672 if(lp->options & OPTION_WOL_ENABLE){
1673 /* enable wol */
1674 if(lp->options & OPTION_WAKE_MAGIC_ENABLE)
1675 amd8111e_enable_magicpkt(lp);
1676 if(lp->options & OPTION_WAKE_PHY_ENABLE)
1677 amd8111e_enable_link_change(lp);
1679 pci_enable_wake(pci_dev, PCI_D3hot, 1);
1680 pci_enable_wake(pci_dev, PCI_D3cold, 1);
1683 else{
1684 pci_enable_wake(pci_dev, PCI_D3hot, 0);
1685 pci_enable_wake(pci_dev, PCI_D3cold, 0);
1688 pci_save_state(pci_dev);
1689 pci_set_power_state(pci_dev, PCI_D3hot);
1691 return 0;
1693 static int amd8111e_resume(struct pci_dev *pci_dev)
1695 struct net_device *dev = pci_get_drvdata(pci_dev);
1696 struct amd8111e_priv *lp = netdev_priv(dev);
1698 if (!netif_running(dev))
1699 return 0;
1701 pci_set_power_state(pci_dev, PCI_D0);
1702 pci_restore_state(pci_dev);
1704 pci_enable_wake(pci_dev, PCI_D3hot, 0);
1705 pci_enable_wake(pci_dev, PCI_D3cold, 0); /* D3 cold */
1707 netif_device_attach(dev);
1709 spin_lock_irq(&lp->lock);
1710 amd8111e_restart(dev);
1711 /* Restart ipg timer */
1712 if(lp->options & OPTION_DYN_IPG_ENABLE)
1713 mod_timer(&lp->ipg_data.ipg_timer,
1714 jiffies + IPG_CONVERGE_JIFFIES);
1715 spin_unlock_irq(&lp->lock);
1717 return 0;
1721 static void __devexit amd8111e_remove_one(struct pci_dev *pdev)
1723 struct net_device *dev = pci_get_drvdata(pdev);
1724 if (dev) {
1725 unregister_netdev(dev);
1726 iounmap(((struct amd8111e_priv *)netdev_priv(dev))->mmio);
1727 free_netdev(dev);
1728 pci_release_regions(pdev);
1729 pci_disable_device(pdev);
1730 pci_set_drvdata(pdev, NULL);
1733 static void amd8111e_config_ipg(struct net_device* dev)
1735 struct amd8111e_priv *lp = netdev_priv(dev);
1736 struct ipg_info* ipg_data = &lp->ipg_data;
1737 void __iomem *mmio = lp->mmio;
1738 unsigned int prev_col_cnt = ipg_data->col_cnt;
1739 unsigned int total_col_cnt;
1740 unsigned int tmp_ipg;
1742 if(lp->link_config.duplex == DUPLEX_FULL){
1743 ipg_data->ipg = DEFAULT_IPG;
1744 return;
1747 if(ipg_data->ipg_state == SSTATE){
1749 if(ipg_data->timer_tick == IPG_STABLE_TIME){
1751 ipg_data->timer_tick = 0;
1752 ipg_data->ipg = MIN_IPG - IPG_STEP;
1753 ipg_data->current_ipg = MIN_IPG;
1754 ipg_data->diff_col_cnt = 0xFFFFFFFF;
1755 ipg_data->ipg_state = CSTATE;
1757 else
1758 ipg_data->timer_tick++;
1761 if(ipg_data->ipg_state == CSTATE){
1763 /* Get the current collision count */
1765 total_col_cnt = ipg_data->col_cnt =
1766 amd8111e_read_mib(mmio, xmt_collisions);
1768 if ((total_col_cnt - prev_col_cnt) <
1769 (ipg_data->diff_col_cnt)){
1771 ipg_data->diff_col_cnt =
1772 total_col_cnt - prev_col_cnt ;
1774 ipg_data->ipg = ipg_data->current_ipg;
1777 ipg_data->current_ipg += IPG_STEP;
1779 if (ipg_data->current_ipg <= MAX_IPG)
1780 tmp_ipg = ipg_data->current_ipg;
1781 else{
1782 tmp_ipg = ipg_data->ipg;
1783 ipg_data->ipg_state = SSTATE;
1785 writew((u32)tmp_ipg, mmio + IPG);
1786 writew((u32)(tmp_ipg - IFS1_DELTA), mmio + IFS1);
1788 mod_timer(&lp->ipg_data.ipg_timer, jiffies + IPG_CONVERGE_JIFFIES);
1789 return;
1793 static void __devinit amd8111e_probe_ext_phy(struct net_device* dev)
1795 struct amd8111e_priv *lp = netdev_priv(dev);
1796 int i;
1798 for (i = 0x1e; i >= 0; i--) {
1799 u32 id1, id2;
1801 if (amd8111e_read_phy(lp, i, MII_PHYSID1, &id1))
1802 continue;
1803 if (amd8111e_read_phy(lp, i, MII_PHYSID2, &id2))
1804 continue;
1805 lp->ext_phy_id = (id1 << 16) | id2;
1806 lp->ext_phy_addr = i;
1807 return;
1809 lp->ext_phy_id = 0;
1810 lp->ext_phy_addr = 1;
1813 static const struct net_device_ops amd8111e_netdev_ops = {
1814 .ndo_open = amd8111e_open,
1815 .ndo_stop = amd8111e_close,
1816 .ndo_start_xmit = amd8111e_start_xmit,
1817 .ndo_tx_timeout = amd8111e_tx_timeout,
1818 .ndo_get_stats = amd8111e_get_stats,
1819 .ndo_set_multicast_list = amd8111e_set_multicast_list,
1820 .ndo_validate_addr = eth_validate_addr,
1821 .ndo_set_mac_address = amd8111e_set_mac_address,
1822 .ndo_do_ioctl = amd8111e_ioctl,
1823 .ndo_change_mtu = amd8111e_change_mtu,
1824 #if AMD8111E_VLAN_TAG_USED
1825 .ndo_vlan_rx_register = amd8111e_vlan_rx_register,
1826 #endif
1827 #ifdef CONFIG_NET_POLL_CONTROLLER
1828 .ndo_poll_controller = amd8111e_poll,
1829 #endif
1832 static int __devinit amd8111e_probe_one(struct pci_dev *pdev,
1833 const struct pci_device_id *ent)
1835 int err,i,pm_cap;
1836 unsigned long reg_addr,reg_len;
1837 struct amd8111e_priv* lp;
1838 struct net_device* dev;
1840 err = pci_enable_device(pdev);
1841 if(err){
1842 printk(KERN_ERR "amd8111e: Cannot enable new PCI device, "
1843 "exiting.\n");
1844 return err;
1847 if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)){
1848 printk(KERN_ERR "amd8111e: Cannot find PCI base address, "
1849 "exiting.\n");
1850 err = -ENODEV;
1851 goto err_disable_pdev;
1854 err = pci_request_regions(pdev, MODULE_NAME);
1855 if(err){
1856 printk(KERN_ERR "amd8111e: Cannot obtain PCI resources, "
1857 "exiting.\n");
1858 goto err_disable_pdev;
1861 pci_set_master(pdev);
1863 /* Find power-management capability. */
1864 if((pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM))==0){
1865 printk(KERN_ERR "amd8111e: No Power Management capability, "
1866 "exiting.\n");
1867 goto err_free_reg;
1870 /* Initialize DMA */
1871 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) < 0) {
1872 printk(KERN_ERR "amd8111e: DMA not supported,"
1873 "exiting.\n");
1874 goto err_free_reg;
1877 reg_addr = pci_resource_start(pdev, 0);
1878 reg_len = pci_resource_len(pdev, 0);
1880 dev = alloc_etherdev(sizeof(struct amd8111e_priv));
1881 if (!dev) {
1882 printk(KERN_ERR "amd8111e: Etherdev alloc failed, exiting.\n");
1883 err = -ENOMEM;
1884 goto err_free_reg;
1887 SET_NETDEV_DEV(dev, &pdev->dev);
1889 #if AMD8111E_VLAN_TAG_USED
1890 dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX ;
1891 #endif
1893 lp = netdev_priv(dev);
1894 lp->pci_dev = pdev;
1895 lp->amd8111e_net_dev = dev;
1896 lp->pm_cap = pm_cap;
1898 spin_lock_init(&lp->lock);
1900 lp->mmio = ioremap(reg_addr, reg_len);
1901 if (!lp->mmio) {
1902 printk(KERN_ERR "amd8111e: Cannot map device registers, "
1903 "exiting\n");
1904 err = -ENOMEM;
1905 goto err_free_dev;
1908 /* Initializing MAC address */
1909 for(i = 0; i < ETH_ADDR_LEN; i++)
1910 dev->dev_addr[i] = readb(lp->mmio + PADR + i);
1912 /* Setting user defined parametrs */
1913 lp->ext_phy_option = speed_duplex[card_idx];
1914 if(coalesce[card_idx])
1915 lp->options |= OPTION_INTR_COAL_ENABLE;
1916 if(dynamic_ipg[card_idx++])
1917 lp->options |= OPTION_DYN_IPG_ENABLE;
1920 /* Initialize driver entry points */
1921 dev->netdev_ops = &amd8111e_netdev_ops;
1922 SET_ETHTOOL_OPS(dev, &ops);
1923 dev->irq =pdev->irq;
1924 dev->watchdog_timeo = AMD8111E_TX_TIMEOUT;
1925 netif_napi_add(dev, &lp->napi, amd8111e_rx_poll, 32);
1927 #if AMD8111E_VLAN_TAG_USED
1928 dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
1929 #endif
1930 /* Probe the external PHY */
1931 amd8111e_probe_ext_phy(dev);
1933 /* setting mii default values */
1934 lp->mii_if.dev = dev;
1935 lp->mii_if.mdio_read = amd8111e_mdio_read;
1936 lp->mii_if.mdio_write = amd8111e_mdio_write;
1937 lp->mii_if.phy_id = lp->ext_phy_addr;
1939 /* Set receive buffer length and set jumbo option*/
1940 amd8111e_set_rx_buff_len(dev);
1943 err = register_netdev(dev);
1944 if (err) {
1945 printk(KERN_ERR "amd8111e: Cannot register net device, "
1946 "exiting.\n");
1947 goto err_iounmap;
1950 pci_set_drvdata(pdev, dev);
1952 /* Initialize software ipg timer */
1953 if(lp->options & OPTION_DYN_IPG_ENABLE){
1954 init_timer(&lp->ipg_data.ipg_timer);
1955 lp->ipg_data.ipg_timer.data = (unsigned long) dev;
1956 lp->ipg_data.ipg_timer.function = (void *)&amd8111e_config_ipg;
1957 lp->ipg_data.ipg_timer.expires = jiffies +
1958 IPG_CONVERGE_JIFFIES;
1959 lp->ipg_data.ipg = DEFAULT_IPG;
1960 lp->ipg_data.ipg_state = CSTATE;
1963 /* display driver and device information */
1965 chip_version = (readl(lp->mmio + CHIPID) & 0xf0000000)>>28;
1966 printk(KERN_INFO "%s: AMD-8111e Driver Version: %s\n",
1967 dev->name,MODULE_VERS);
1968 printk(KERN_INFO "%s: [ Rev %x ] PCI 10/100BaseT Ethernet %pM\n",
1969 dev->name, chip_version, dev->dev_addr);
1970 if (lp->ext_phy_id)
1971 printk(KERN_INFO "%s: Found MII PHY ID 0x%08x at address 0x%02x\n",
1972 dev->name, lp->ext_phy_id, lp->ext_phy_addr);
1973 else
1974 printk(KERN_INFO "%s: Couldn't detect MII PHY, assuming address 0x01\n",
1975 dev->name);
1976 return 0;
1977 err_iounmap:
1978 iounmap(lp->mmio);
1980 err_free_dev:
1981 free_netdev(dev);
1983 err_free_reg:
1984 pci_release_regions(pdev);
1986 err_disable_pdev:
1987 pci_disable_device(pdev);
1988 pci_set_drvdata(pdev, NULL);
1989 return err;
1993 static struct pci_driver amd8111e_driver = {
1994 .name = MODULE_NAME,
1995 .id_table = amd8111e_pci_tbl,
1996 .probe = amd8111e_probe_one,
1997 .remove = __devexit_p(amd8111e_remove_one),
1998 .suspend = amd8111e_suspend,
1999 .resume = amd8111e_resume
2002 static int __init amd8111e_init(void)
2004 return pci_register_driver(&amd8111e_driver);
2007 static void __exit amd8111e_cleanup(void)
2009 pci_unregister_driver(&amd8111e_driver);
2012 module_init(amd8111e_init);
2013 module_exit(amd8111e_cleanup);