isci: Remove SCIC_SWAP_DWORD()

[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / scsi / isci / core / scic_sds_phy.c

/*
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
 * The full GNU General Public License is included in this distribution
 * in the file called LICENSE.GPL.
 *
 * BSD LICENSE
 *
 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *   * Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *   * Redistributions in binary form must reproduce the above copyright
 *     notice, this list of conditions and the following disclaimer in
 *     the documentation and/or other materials provided with the
 *     distribution.
 *   * Neither the name of Intel Corporation nor the names of its
 *     contributors may be used to endorse or promote products derived
 *     from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <scsi/sas.h>
#include "sas.h"
#include "sci_base_state.h"
#include "sci_base_state_machine.h"
#include "scic_phy.h"
#include "scic_sds_controller.h"
#include "scic_sds_phy.h"
#include "scic_sds_port.h"
#include "remote_node_context.h"
#include "sci_environment.h"
#include "sci_util.h"
#include "scu_event_codes.h"

#define SCIC_SDS_PHY_MIN_TIMER_COUNT  (SCI_MAX_PHYS)
#define SCIC_SDS_PHY_MAX_TIMER_COUNT  (SCI_MAX_PHYS)

/* Maximum arbitration wait time in micro-seconds */
#define SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME  (700)

enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy)
{
        return sci_phy->max_negotiated_speed;
}

/*
 * *****************************************************************************
 * * SCIC SDS PHY Internal Methods
 * ***************************************************************************** */

/**
 * This method will initialize the phy transport layer registers
 * @sci_phy:
 * @transport_layer_registers
 *
 * enum sci_status
 */
static enum sci_status scic_sds_phy_transport_layer_initialization(
        struct scic_sds_phy *sci_phy,
        struct scu_transport_layer_registers __iomem *transport_layer_registers)
{
        u32 tl_control;

        sci_phy->transport_layer_registers = transport_layer_registers;

        writel(SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX,
                &sci_phy->transport_layer_registers->stp_rni);

        /*
         * Hardware team recommends that we enable the STP prefetch for all
         * transports
         */
        tl_control = readl(&sci_phy->transport_layer_registers->control);
        tl_control |= SCU_TLCR_GEN_BIT(STP_WRITE_DATA_PREFETCH);
        writel(tl_control, &sci_phy->transport_layer_registers->control);

        return SCI_SUCCESS;
}

/**
 * This method will initialize the phy link layer registers
 * @sci_phy:
 * @link_layer_registers:
 *
 * enum sci_status
 */
static enum sci_status
scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy,
                                       struct scu_link_layer_registers __iomem *link_layer_registers)
{
        struct scic_sds_controller *scic =
                sci_phy->owning_port->owning_controller;
        int phy_idx = sci_phy->phy_index;
        struct sci_phy_user_params *phy_user =
                &scic->user_parameters.sds1.phys[phy_idx];
        struct sci_phy_oem_params *phy_oem =
                &scic->oem_parameters.sds1.phys[phy_idx];
        u32 phy_configuration;
        struct scic_phy_cap phy_cap;
        u32 parity_check = 0;
        u32 parity_count = 0;
        u32 llctl, link_rate;
        u32 clksm_value = 0;

        sci_phy->link_layer_registers = link_layer_registers;

        /* Set our IDENTIFY frame data */
        #define SCI_END_DEVICE 0x01

        writel(SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) |
               SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) |
               SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) |
               SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) |
               SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE),
               &sci_phy->link_layer_registers->transmit_identification);

        /* Write the device SAS Address */
        writel(0xFEDCBA98,
               &sci_phy->link_layer_registers->sas_device_name_high);
        writel(phy_idx, &sci_phy->link_layer_registers->sas_device_name_low);

        /* Write the source SAS Address */
        writel(phy_oem->sas_address.high,
                &sci_phy->link_layer_registers->source_sas_address_high);
        writel(phy_oem->sas_address.low,
                &sci_phy->link_layer_registers->source_sas_address_low);

        /* Clear and Set the PHY Identifier */
        writel(0, &sci_phy->link_layer_registers->identify_frame_phy_id);
        writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx),
                &sci_phy->link_layer_registers->identify_frame_phy_id);

        /* Change the initial state of the phy configuration register */
        phy_configuration =
                readl(&sci_phy->link_layer_registers->phy_configuration);

        /* Hold OOB state machine in reset */
        phy_configuration |=  SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
        writel(phy_configuration,
                &sci_phy->link_layer_registers->phy_configuration);

        /* Configure the SNW capabilities */
        phy_cap.all = 0;
        phy_cap.start = 1;
        phy_cap.gen3_no_ssc = 1;
        phy_cap.gen2_no_ssc = 1;
        phy_cap.gen1_no_ssc = 1;
        if (scic->oem_parameters.sds1.controller.do_enable_ssc == true) {
                phy_cap.gen3_ssc = 1;
                phy_cap.gen2_ssc = 1;
                phy_cap.gen1_ssc = 1;
        }

        /*
         * The SAS specification indicates that the phy_capabilities that
         * are transmitted shall have an even parity.  Calculate the parity. */
        parity_check = phy_cap.all;
        while (parity_check != 0) {
                if (parity_check & 0x1)
                        parity_count++;
                parity_check >>= 1;
        }

        /*
         * If parity indicates there are an odd number of bits set, then
         * set the parity bit to 1 in the phy capabilities. */
        if ((parity_count % 2) != 0)
                phy_cap.parity = 1;

        writel(phy_cap.all, &sci_phy->link_layer_registers->phy_capabilities);

        /* Set the enable spinup period but disable the ability to send
         * notify enable spinup
         */
        writel(SCU_ENSPINUP_GEN_VAL(COUNT,
                        phy_user->notify_enable_spin_up_insertion_frequency),
                &sci_phy->link_layer_registers->notify_enable_spinup_control);

        /* Write the ALIGN Insertion Ferequency for connected phy and
         * inpendent of connected state
         */
        clksm_value = SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(CONNECTED,
                        phy_user->in_connection_align_insertion_frequency);

        clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL,
                        phy_user->align_insertion_frequency);

        writel(clksm_value, &sci_phy->link_layer_registers->clock_skew_management);

        /* @todo Provide a way to write this register correctly */
        writel(0x02108421,
                &sci_phy->link_layer_registers->afe_lookup_table_control);

        llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT,
                (u8)scic->user_parameters.sds1.no_outbound_task_timeout);

        switch(phy_user->max_speed_generation) {
        case SCIC_SDS_PARM_GEN3_SPEED:
                link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3;
                break;
        case SCIC_SDS_PARM_GEN2_SPEED:
                link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2;
                break;
        default:
                link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1;
                break;
        }
        llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate);
        writel(llctl, &sci_phy->link_layer_registers->link_layer_control);

        if (is_a0() || is_a2()) {
                /* Program the max ARB time for the PHY to 700us so we inter-operate with
                 * the PMC expander which shuts down PHYs if the expander PHY generates too
                 * many breaks.  This time value will guarantee that the initiator PHY will
                 * generate the break.
                 */
                writel(SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME,
                        &sci_phy->link_layer_registers->maximum_arbitration_wait_timer_timeout);
        }

        /*
         * Set the link layer hang detection to 500ms (0x1F4) from its default
         * value of 128ms.  Max value is 511 ms.
         */
        writel(0x1F4, &sci_phy->link_layer_registers->link_layer_hang_detection_timeout);

        /* We can exit the initial state to the stopped state */
        sci_base_state_machine_change_state(&sci_phy->state_machine,
                                            SCI_BASE_PHY_STATE_STOPPED);

        return SCI_SUCCESS;
}

/**
 * This function will handle the sata SIGNATURE FIS timeout condition.  It will
 * restart the starting substate machine since we dont know what has actually
 * happening.
 */
static void scic_sds_phy_sata_timeout(void *phy)
{
        struct scic_sds_phy *sci_phy = phy;

        dev_dbg(sciphy_to_dev(sci_phy),
                 "%s: SCIC SDS Phy 0x%p did not receive signature fis before "
                 "timeout.\n",
                 __func__,
                 sci_phy);

        sci_base_state_machine_stop(&sci_phy->starting_substate_machine);

        sci_base_state_machine_change_state(&sci_phy->state_machine,
                                            SCI_BASE_PHY_STATE_STARTING);
}

/**
 * This method returns the port currently containing this phy. If the phy is
 *    currently contained by the dummy port, then the phy is considered to not
 *    be part of a port.
 * @sci_phy: This parameter specifies the phy for which to retrieve the
 *    containing port.
 *
 * This method returns a handle to a port that contains the supplied phy.
 * NULL This value is returned if the phy is not part of a real
 * port (i.e. it's contained in the dummy port). !NULL All other
 * values indicate a handle/pointer to the port containing the phy.
 */
struct scic_sds_port *scic_sds_phy_get_port(
        struct scic_sds_phy *sci_phy)
{
        if (scic_sds_port_get_index(sci_phy->owning_port) == SCIC_SDS_DUMMY_PORT)
                return NULL;

        return sci_phy->owning_port;
}

/**
 * This method will assign a port to the phy object.
 * @out]: sci_phy This parameter specifies the phy for which to assign a port
 *    object.
 *
 *
 */
void scic_sds_phy_set_port(
        struct scic_sds_phy *sci_phy,
        struct scic_sds_port *sci_port)
{
        sci_phy->owning_port = sci_port;

        if (sci_phy->bcn_received_while_port_unassigned) {
                sci_phy->bcn_received_while_port_unassigned = false;
                scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy);
        }
}

/**
 * This method will initialize the constructed phy
 * @sci_phy:
 * @link_layer_registers:
 *
 * enum sci_status
 */
enum sci_status scic_sds_phy_initialize(
        struct scic_sds_phy *sci_phy,
        struct scu_transport_layer_registers __iomem *transport_layer_registers,
        struct scu_link_layer_registers __iomem *link_layer_registers)
{
        struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy);
        struct isci_host *ihost = scic->ihost;

        /* Create the SIGNATURE FIS Timeout timer for this phy */
        sci_phy->sata_timeout_timer =
                isci_timer_create(
                        ihost,
                        sci_phy,
                        scic_sds_phy_sata_timeout);

        /* Perfrom the initialization of the TL hardware */
        scic_sds_phy_transport_layer_initialization(
                        sci_phy,
                        transport_layer_registers);

        /* Perofrm the initialization of the PE hardware */
        scic_sds_phy_link_layer_initialization(sci_phy, link_layer_registers);

        /*
         * There is nothing that needs to be done in this state just
         * transition to the stopped state. */
        sci_base_state_machine_change_state(&sci_phy->state_machine,
                                            SCI_BASE_PHY_STATE_STOPPED);

        return SCI_SUCCESS;
}

/**
 * This method assigns the direct attached device ID for this phy.
 *
 * @sci_phy The phy for which the direct attached device id is to
 *       be assigned.
 * @device_id The direct attached device ID to assign to the phy.
 *       This will either be the RNi for the device or an invalid RNi if there
 *       is no current device assigned to the phy.
 */
void scic_sds_phy_setup_transport(
        struct scic_sds_phy *sci_phy,
        u32 device_id)
{
        u32 tl_control;

        writel(device_id, &sci_phy->transport_layer_registers->stp_rni);

        /*
         * The read should guarantee that the first write gets posted
         * before the next write
         */
        tl_control = readl(&sci_phy->transport_layer_registers->control);
        tl_control |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE);
        writel(tl_control, &sci_phy->transport_layer_registers->control);
}

/**
 *
 * @sci_phy: The phy object to be suspended.
 *
 * This function will perform the register reads/writes to suspend the SCU
 * hardware protocol engine. none
 */
static void scic_sds_phy_suspend(
        struct scic_sds_phy *sci_phy)
{
        u32 scu_sas_pcfg_value;

        scu_sas_pcfg_value =
                readl(&sci_phy->link_layer_registers->phy_configuration);
        scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE);
        writel(scu_sas_pcfg_value,
                &sci_phy->link_layer_registers->phy_configuration);

        scic_sds_phy_setup_transport(
                        sci_phy,
                        SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX);
}

void scic_sds_phy_resume(struct scic_sds_phy *sci_phy)
{
        u32 scu_sas_pcfg_value;

        scu_sas_pcfg_value =
                readl(&sci_phy->link_layer_registers->phy_configuration);
        scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE);
        writel(scu_sas_pcfg_value,
                &sci_phy->link_layer_registers->phy_configuration);
}

void scic_sds_phy_get_sas_address(struct scic_sds_phy *sci_phy,
                                  struct sci_sas_address *sas_address)
{
        sas_address->high = readl(&sci_phy->link_layer_registers->source_sas_address_high);
        sas_address->low = readl(&sci_phy->link_layer_registers->source_sas_address_low);
}

void scic_sds_phy_get_attached_sas_address(struct scic_sds_phy *sci_phy,
                                           struct sci_sas_address *sas_address)
{
        struct sas_identify_frame *iaf;
        struct isci_phy *iphy = sci_phy->iphy;

        iaf = &iphy->frame_rcvd.iaf;
        memcpy(sas_address, iaf->sas_addr, SAS_ADDR_SIZE);
}

void scic_sds_phy_get_protocols(struct scic_sds_phy *sci_phy,
                                struct scic_phy_proto *protocols)
{
        protocols->all =
                (u16)(readl(&sci_phy->
                        link_layer_registers->transmit_identification) &
                                0x0000FFFF);
}

/**
 * This method will attempt to start the phy object. This request is only valid
 *    when the phy is in the stopped state
 * @sci_phy:
 *
 * enum sci_status
 */
enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy)
{
        return sci_phy->state_handlers->start_handler(sci_phy);
}

/**
 * This method will attempt to stop the phy object.
 * @sci_phy:
 *
 * enum sci_status SCI_SUCCESS if the phy is going to stop SCI_INVALID_STATE
 * if the phy is not in a valid state to stop
 */
enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy)
{
        return sci_phy->state_handlers->stop_handler(sci_phy);
}

/**
 * This method will attempt to reset the phy.  This request is only valid when
 *    the phy is in an ready state
 * @sci_phy:
 *
 * enum sci_status
 */
enum sci_status scic_sds_phy_reset(
        struct scic_sds_phy *sci_phy)
{
        return sci_phy->state_handlers->reset_handler(sci_phy);
}

/**
 * This method will process the event code received.
 * @sci_phy:
 * @event_code:
 *
 * enum sci_status
 */
enum sci_status scic_sds_phy_event_handler(
        struct scic_sds_phy *sci_phy,
        u32 event_code)
{
        return sci_phy->state_handlers->event_handler(sci_phy, event_code);
}

/**
 * This method will process the frame index received.
 * @sci_phy:
 * @frame_index:
 *
 * enum sci_status
 */
enum sci_status scic_sds_phy_frame_handler(
        struct scic_sds_phy *sci_phy,
        u32 frame_index)
{
        return sci_phy->state_handlers->frame_handler(sci_phy, frame_index);
}

/**
 * This method will give the phy permission to consume power
 * @sci_phy:
 *
 * enum sci_status
 */
enum sci_status scic_sds_phy_consume_power_handler(
        struct scic_sds_phy *sci_phy)
{
        return sci_phy->state_handlers->consume_power_handler(sci_phy);
}

/*
 * *****************************************************************************
 * * SCIC SDS PHY HELPER FUNCTIONS
 * ***************************************************************************** */


/**
 *
 * @sci_phy: The phy object that received SAS PHY DETECTED.
 *
 * This method continues the link training for the phy as if it were a SAS PHY
 * instead of a SATA PHY. This is done because the completion queue had a SAS
 * PHY DETECTED event when the state machine was expecting a SATA PHY event.
 * none
 */
static void scic_sds_phy_start_sas_link_training(
        struct scic_sds_phy *sci_phy)
{
        u32 phy_control;

        phy_control =
                readl(&sci_phy->link_layer_registers->phy_configuration);
        phy_control |= SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD);
        writel(phy_control,
                &sci_phy->link_layer_registers->phy_configuration);

        sci_base_state_machine_change_state(
                &sci_phy->starting_substate_machine,
                SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN
                );

        sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SAS;
}

/**
 *
 * @sci_phy: The phy object that received a SATA SPINUP HOLD event
 *
 * This method continues the link training for the phy as if it were a SATA PHY
 * instead of a SAS PHY.  This is done because the completion queue had a SATA
 * SPINUP HOLD event when the state machine was expecting a SAS PHY event. none
 */
static void scic_sds_phy_start_sata_link_training(
        struct scic_sds_phy *sci_phy)
{
        sci_base_state_machine_change_state(
                &sci_phy->starting_substate_machine,
                SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER
                );

        sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA;
}

/**
 * scic_sds_phy_complete_link_training - perform processing common to
 *    all protocols upon completion of link training.
 * @sci_phy: This parameter specifies the phy object for which link training
 *    has completed.
 * @max_link_rate: This parameter specifies the maximum link rate to be
 *    associated with this phy.
 * @next_state: This parameter specifies the next state for the phy's starting
 *    sub-state machine.
 *
 */
static void scic_sds_phy_complete_link_training(
        struct scic_sds_phy *sci_phy,
        enum sas_linkrate max_link_rate,
        u32 next_state)
{
        sci_phy->max_negotiated_speed = max_link_rate;

        sci_base_state_machine_change_state(&sci_phy->starting_substate_machine,
                                            next_state);
}

static void scic_sds_phy_restart_starting_state(
        struct scic_sds_phy *sci_phy)
{
        /* Stop the current substate machine */
        sci_base_state_machine_stop(&sci_phy->starting_substate_machine);

        /* Re-enter the base state machine starting state */
        sci_base_state_machine_change_state(&sci_phy->state_machine,
                                            SCI_BASE_PHY_STATE_STARTING);
}

/* ****************************************************************************
   * SCIC SDS PHY general handlers
   ************************************************************************** */
static enum sci_status scic_sds_phy_starting_substate_general_stop_handler(
        struct scic_sds_phy *phy)
{
        sci_base_state_machine_stop(&phy->starting_substate_machine);

        sci_base_state_machine_change_state(&phy->state_machine,
                                                 SCI_BASE_PHY_STATE_STOPPED);

        return SCI_SUCCESS;
}

/*
 * *****************************************************************************
 * * SCIC SDS PHY EVENT_HANDLERS
 * ***************************************************************************** */

/**
 *
 * @phy: This struct scic_sds_phy object which has received an event.
 * @event_code: This is the event code which the phy object is to decode.
 *
 * This method is called when an event notification is received for the phy
 * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. -
 * decode the event - sas phy detected causes a state transition to the wait
 * for speed event notification. - any other events log a warning message and
 * set a failure status enum sci_status SCI_SUCCESS on any valid event notification
 * SCI_FAILURE on any unexpected event notifation
 */
static enum sci_status scic_sds_phy_starting_substate_await_ossp_event_handler(
        struct scic_sds_phy *sci_phy,
        u32 event_code)
{
        u32 result = SCI_SUCCESS;

        switch (scu_get_event_code(event_code)) {
        case SCU_EVENT_SAS_PHY_DETECTED:
                scic_sds_phy_start_sas_link_training(sci_phy);
                sci_phy->is_in_link_training = true;
                break;

        case SCU_EVENT_SATA_SPINUP_HOLD:
                scic_sds_phy_start_sata_link_training(sci_phy);
                sci_phy->is_in_link_training = true;
                break;

        default:
                dev_dbg(sciphy_to_dev(sci_phy),
                        "%s: PHY starting substate machine received "
                        "unexpected event_code %x\n",
                        __func__,
                        event_code);

                result = SCI_FAILURE;
                break;
        }

        return result;
}

/**
 *
 * @phy: This struct scic_sds_phy object which has received an event.
 * @event_code: This is the event code which the phy object is to decode.
 *
 * This method is called when an event notification is received for the phy
 * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. -
 * decode the event - sas phy detected returns us back to this state. - speed
 * event detected causes a state transition to the wait for iaf. - identify
 * timeout is an un-expected event and the state machine is restarted. - link
 * failure events restart the starting state machine - any other events log a
 * warning message and set a failure status enum sci_status SCI_SUCCESS on any valid
 * event notification SCI_FAILURE on any unexpected event notifation
 */
static enum sci_status scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler(
        struct scic_sds_phy *sci_phy,
        u32 event_code)
{
        u32 result = SCI_SUCCESS;

        switch (scu_get_event_code(event_code)) {
        case SCU_EVENT_SAS_PHY_DETECTED:
                /*
                 * Why is this being reported again by the controller?
                 * We would re-enter this state so just stay here */
                break;

        case SCU_EVENT_SAS_15:
        case SCU_EVENT_SAS_15_SSC:
                scic_sds_phy_complete_link_training(
                        sci_phy,
                        SAS_LINK_RATE_1_5_GBPS,
                        SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF);
                break;

        case SCU_EVENT_SAS_30:
        case SCU_EVENT_SAS_30_SSC:
                scic_sds_phy_complete_link_training(
                        sci_phy,
                        SAS_LINK_RATE_3_0_GBPS,
                        SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF);
                break;

        case SCU_EVENT_SAS_60:
        case SCU_EVENT_SAS_60_SSC:
                scic_sds_phy_complete_link_training(
                        sci_phy,
                        SAS_LINK_RATE_6_0_GBPS,
                        SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF);
                break;

        case SCU_EVENT_SATA_SPINUP_HOLD:
                /*
                 * We were doing SAS PHY link training and received a SATA PHY event
                 * continue OOB/SN as if this were a SATA PHY */
                scic_sds_phy_start_sata_link_training(sci_phy);
                break;

        case SCU_EVENT_LINK_FAILURE:
                /* Link failure change state back to the starting state */
                scic_sds_phy_restart_starting_state(sci_phy);
                break;

        default:
                dev_warn(sciphy_to_dev(sci_phy),
                         "%s: PHY starting substate machine received "
                         "unexpected event_code %x\n",
                         __func__,
                         event_code);

                result = SCI_FAILURE;
                break;
        }

        return result;
}

/**
 *
 * @phy: This struct scic_sds_phy object which has received an event.
 * @event_code: This is the event code which the phy object is to decode.
 *
 * This method is called when an event notification is received for the phy
 * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. -
 * decode the event - sas phy detected event backs up the state machine to the
 * await speed notification. - identify timeout is an un-expected event and the
 * state machine is restarted. - link failure events restart the starting state
 * machine - any other events log a warning message and set a failure status
 * enum sci_status SCI_SUCCESS on any valid event notification SCI_FAILURE on any
 * unexpected event notifation
 */
static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_event_handler(
        struct scic_sds_phy *sci_phy,
        u32 event_code)
{
        u32 result = SCI_SUCCESS;

        switch (scu_get_event_code(event_code)) {
        case SCU_EVENT_SAS_PHY_DETECTED:
                /* Backup the state machine */
                scic_sds_phy_start_sas_link_training(sci_phy);
                break;

        case SCU_EVENT_SATA_SPINUP_HOLD:
                /*
                 * We were doing SAS PHY link training and received a SATA PHY event
                 * continue OOB/SN as if this were a SATA PHY */
                scic_sds_phy_start_sata_link_training(sci_phy);
                break;

        case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT:
        case SCU_EVENT_LINK_FAILURE:
        case SCU_EVENT_HARD_RESET_RECEIVED:
                /* Start the oob/sn state machine over again */
                scic_sds_phy_restart_starting_state(sci_phy);
                break;

        default:
                dev_warn(sciphy_to_dev(sci_phy),
                         "%s: PHY starting substate machine received "
                         "unexpected event_code %x\n",
                         __func__,
                         event_code);

                result = SCI_FAILURE;
                break;
        }

        return result;
}

/**
 *
 * @phy: This struct scic_sds_phy object which has received an event.
 * @event_code: This is the event code which the phy object is to decode.
 *
 * This method is called when an event notification is received for the phy
 * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_POWER. -
 * decode the event - link failure events restart the starting state machine -
 * any other events log a warning message and set a failure status enum sci_status
 * SCI_SUCCESS on a link failure event SCI_FAILURE on any unexpected event
 * notifation
 */
static enum sci_status scic_sds_phy_starting_substate_await_sas_power_event_handler(
        struct scic_sds_phy *sci_phy,
        u32 event_code)
{
        u32 result = SCI_SUCCESS;

        switch (scu_get_event_code(event_code)) {
        case SCU_EVENT_LINK_FAILURE:
                /* Link failure change state back to the starting state */
                scic_sds_phy_restart_starting_state(sci_phy);
                break;

        default:
                dev_warn(sciphy_to_dev(sci_phy),
                        "%s: PHY starting substate machine received unexpected "
                        "event_code %x\n",
                        __func__,
                        event_code);

                result = SCI_FAILURE;
                break;
        }

        return result;
}

/**
 *
 * @phy: This struct scic_sds_phy object which has received an event.
 * @event_code: This is the event code which the phy object is to decode.
 *
 * This method is called when an event notification is received for the phy
 * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. -
 * decode the event - link failure events restart the starting state machine -
 * sata spinup hold events are ignored since they are expected - any other
 * events log a warning message and set a failure status enum sci_status SCI_SUCCESS
 * on a link failure event SCI_FAILURE on any unexpected event notifation
 */
static enum sci_status scic_sds_phy_starting_substate_await_sata_power_event_handler(
        struct scic_sds_phy *sci_phy,
        u32 event_code)
{
        u32 result = SCI_SUCCESS;

        switch (scu_get_event_code(event_code)) {
        case SCU_EVENT_LINK_FAILURE:
                /* Link failure change state back to the starting state */
                scic_sds_phy_restart_starting_state(sci_phy);
                break;

        case SCU_EVENT_SATA_SPINUP_HOLD:
                /* These events are received every 10ms and are expected while in this state */
                break;

        case SCU_EVENT_SAS_PHY_DETECTED:
                /*
                 * There has been a change in the phy type before OOB/SN for the
                 * SATA finished start down the SAS link traning path. */
                scic_sds_phy_start_sas_link_training(sci_phy);
                break;

        default:
                dev_warn(sciphy_to_dev(sci_phy),
                         "%s: PHY starting substate machine received "
                         "unexpected event_code %x\n",
                         __func__,
                         event_code);

                result = SCI_FAILURE;
                break;
        }

        return result;
}

/**
 * scic_sds_phy_starting_substate_await_sata_phy_event_handler -
 * @phy: This struct scic_sds_phy object which has received an event.
 * @event_code: This is the event code which the phy object is to decode.
 *
 * This method is called when an event notification is received for the phy
 * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. -
 * decode the event - link failure events restart the starting state machine -
 * sata spinup hold events are ignored since they are expected - sata phy
 * detected event change to the wait speed event - any other events log a
 * warning message and set a failure status enum sci_status SCI_SUCCESS on a link
 * failure event SCI_FAILURE on any unexpected event notifation
 */
static enum sci_status scic_sds_phy_starting_substate_await_sata_phy_event_handler(
        struct scic_sds_phy *sci_phy, u32 event_code)
{
        u32 result = SCI_SUCCESS;

        switch (scu_get_event_code(event_code)) {
        case SCU_EVENT_LINK_FAILURE:
                /* Link failure change state back to the starting state */
                scic_sds_phy_restart_starting_state(sci_phy);
                break;

        case SCU_EVENT_SATA_SPINUP_HOLD:
                /* These events might be received since we dont know how many may be in
                 * the completion queue while waiting for power
                 */
                break;

        case SCU_EVENT_SATA_PHY_DETECTED:
                sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA;

                /* We have received the SATA PHY notification change state */
                sci_base_state_machine_change_state(&sci_phy->starting_substate_machine,
                                                    SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN);
                break;

        case SCU_EVENT_SAS_PHY_DETECTED:
                /* There has been a change in the phy type before OOB/SN for the
                 * SATA finished start down the SAS link traning path.
                 */
                scic_sds_phy_start_sas_link_training(sci_phy);
                break;

        default:
                dev_warn(sciphy_to_dev(sci_phy),
                         "%s: PHY starting substate machine received "
                         "unexpected event_code %x\n",
                         __func__,
                         event_code);

                result = SCI_FAILURE;
                break;
        }

        return result;
}

/**
 *
 * @phy: This struct scic_sds_phy object which has received an event.
 * @event_code: This is the event code which the phy object is to decode.
 *
 * This method is called when an event notification is received for the phy
 * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN.
 * - decode the event - sata phy detected returns us back to this state. -
 * speed event detected causes a state transition to the wait for signature. -
 * link failure events restart the starting state machine - any other events
 * log a warning message and set a failure status enum sci_status SCI_SUCCESS on any
 * valid event notification SCI_FAILURE on any unexpected event notifation
 */
static enum sci_status scic_sds_phy_starting_substate_await_sata_speed_event_handler(
        struct scic_sds_phy *sci_phy,
        u32 event_code)
{
        u32 result = SCI_SUCCESS;

        switch (scu_get_event_code(event_code)) {
        case SCU_EVENT_SATA_PHY_DETECTED:
                /*
                 * The hardware reports multiple SATA PHY detected events
                 * ignore the extras */
                break;

        case SCU_EVENT_SATA_15:
        case SCU_EVENT_SATA_15_SSC:
                scic_sds_phy_complete_link_training(
                        sci_phy,
                        SAS_LINK_RATE_1_5_GBPS,
                        SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF);
                break;

        case SCU_EVENT_SATA_30:
        case SCU_EVENT_SATA_30_SSC:
                scic_sds_phy_complete_link_training(
                        sci_phy,
                        SAS_LINK_RATE_3_0_GBPS,
                        SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF);
                break;

        case SCU_EVENT_SATA_60:
        case SCU_EVENT_SATA_60_SSC:
                scic_sds_phy_complete_link_training(
                        sci_phy,
                        SAS_LINK_RATE_6_0_GBPS,
                        SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF);
                break;

        case SCU_EVENT_LINK_FAILURE:
                /* Link failure change state back to the starting state */
                scic_sds_phy_restart_starting_state(sci_phy);
                break;

        case SCU_EVENT_SAS_PHY_DETECTED:
                /*
                 * There has been a change in the phy type before OOB/SN for the
                 * SATA finished start down the SAS link traning path. */
                scic_sds_phy_start_sas_link_training(sci_phy);
                break;

        default:
                dev_warn(sciphy_to_dev(sci_phy),
                         "%s: PHY starting substate machine received "
                         "unexpected event_code %x\n",
                         __func__,
                         event_code);

                result = SCI_FAILURE;
                break;
        }

        return result;
}

/**
 * scic_sds_phy_starting_substate_await_sig_fis_event_handler -
 * @phy: This struct scic_sds_phy object which has received an event.
 * @event_code: This is the event code which the phy object is to decode.
 *
 * This method is called when an event notification is received for the phy
 * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. -
 * decode the event - sas phy detected event backs up the state machine to the
 * await speed notification. - identify timeout is an un-expected event and the
 * state machine is restarted. - link failure events restart the starting state
 * machine - any other events log a warning message and set a failure status
 * enum sci_status SCI_SUCCESS on any valid event notification SCI_FAILURE on any
 * unexpected event notifation
 */
static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_event_handler(
        struct scic_sds_phy *sci_phy, u32 event_code)
{
        u32 result = SCI_SUCCESS;

        switch (scu_get_event_code(event_code)) {
        case SCU_EVENT_SATA_PHY_DETECTED:
                /* Backup the state machine */
                sci_base_state_machine_change_state(&sci_phy->starting_substate_machine,
                                                    SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN);
                break;

        case SCU_EVENT_LINK_FAILURE:
                /* Link failure change state back to the starting state */
                scic_sds_phy_restart_starting_state(sci_phy);
                break;

        default:
                dev_warn(sciphy_to_dev(sci_phy),
                         "%s: PHY starting substate machine received "
                         "unexpected event_code %x\n",
                         __func__,
                         event_code);

                result = SCI_FAILURE;
                break;
        }

        return result;
}


/*
 * *****************************************************************************
 * *  SCIC SDS PHY FRAME_HANDLERS
 * ***************************************************************************** */

/**
 *
 * @phy: This is struct scic_sds_phy object which is being requested to decode the
 *    frame data.
 * @frame_index: This is the index of the unsolicited frame which was received
 *    for this phy.
 *
 * This method decodes the unsolicited frame when the struct scic_sds_phy is in the
 * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Get the UF Header - If the UF
 * is an IAF - Copy IAF data to local phy object IAF data buffer. - Change
 * starting substate to wait power. - else - log warning message of unexpected
 * unsolicted frame - release frame buffer enum sci_status SCI_SUCCESS
 */
static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler(
        struct scic_sds_phy *sci_phy, u32 frame_index)
{
        enum sci_status result;
        u32 *frame_words;
        struct sas_identify_frame iaf;
        struct isci_phy *iphy = sci_phy->iphy;

        result = scic_sds_unsolicited_frame_control_get_header(
                &(scic_sds_phy_get_controller(sci_phy)->uf_control),
                frame_index,
                (void **)&frame_words);

        if (result != SCI_SUCCESS)
                return result;

        sci_swab32_cpy(&iaf, frame_words, sizeof(iaf) / sizeof(u32));
        if (iaf.frame_type == 0) {
                u32 state;

                memcpy(&iphy->frame_rcvd.iaf, &iaf, sizeof(iaf));
                if (iaf.smp_tport) {
                        /* We got the IAF for an expander PHY go to the final
                         * state since there are no power requirements for
                         * expander phys.
                         */
                        state = SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL;
                } else {
                        /* We got the IAF we can now go to the await spinup
                         * semaphore state
                         */
                        state = SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER;
                }
                sci_base_state_machine_change_state(
                                &sci_phy->starting_substate_machine,
                                state);
                result = SCI_SUCCESS;
        } else
                dev_warn(sciphy_to_dev(sci_phy),
                        "%s: PHY starting substate machine received "
                        "unexpected frame id %x\n",
                        __func__,
                        frame_index);

        scic_sds_controller_release_frame(scic_sds_phy_get_controller(sci_phy),
                                          frame_index);

        return result;
}

/**
 *
 * @phy: This is struct scic_sds_phy object which is being requested to decode the
 *    frame data.
 * @frame_index: This is the index of the unsolicited frame which was received
 *    for this phy.
 *
 * This method decodes the unsolicited frame when the struct scic_sds_phy is in the
 * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Get the UF Header - If
 * the UF is an SIGNATURE FIS - Copy IAF data to local phy object SIGNATURE FIS
 * data buffer. - else - log warning message of unexpected unsolicted frame -
 * release frame buffer enum sci_status SCI_SUCCESS Must decode the SIGNATURE FIS
 * data
 */
static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handler(
        struct scic_sds_phy *sci_phy,
        u32 frame_index)
{
        enum sci_status result;
        struct dev_to_host_fis *frame_header;
        u32 *fis_frame_data;
        struct isci_phy *iphy = sci_phy->iphy;

        result = scic_sds_unsolicited_frame_control_get_header(
                &(scic_sds_phy_get_controller(sci_phy)->uf_control),
                frame_index,
                (void **)&frame_header);

        if (result != SCI_SUCCESS)
                return result;

        if ((frame_header->fis_type == FIS_REGD2H) &&
            !(frame_header->status & ATA_BUSY)) {
                scic_sds_unsolicited_frame_control_get_buffer(
                        &(scic_sds_phy_get_controller(sci_phy)->uf_control),
                        frame_index,
                        (void **)&fis_frame_data);

                scic_sds_controller_copy_sata_response(&iphy->frame_rcvd.fis,
                                                       frame_header,
                                                       fis_frame_data);

                /* got IAF we can now go to the await spinup semaphore state */
                sci_base_state_machine_change_state(&sci_phy->starting_substate_machine,
                                                    SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL);

                result = SCI_SUCCESS;
        } else
                dev_warn(sciphy_to_dev(sci_phy),
                         "%s: PHY starting substate machine received "
                         "unexpected frame id %x\n",
                         __func__,
                         frame_index);

        /* Regardless of the result we are done with this frame with it */
        scic_sds_controller_release_frame(scic_sds_phy_get_controller(sci_phy),
                                          frame_index);

        return result;
}

/*
 * *****************************************************************************
 * * SCIC SDS PHY POWER_HANDLERS
 * ***************************************************************************** */

/*
 * This method is called by the struct scic_sds_controller when the phy object is
 * granted power. - The notify enable spinups are turned on for this phy object
 * - The phy state machine is transitioned to the
 * SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. enum sci_status SCI_SUCCESS
 */
static enum sci_status scic_sds_phy_starting_substate_await_sas_power_consume_power_handler(
        struct scic_sds_phy *sci_phy)
{
        u32 enable_spinup;

        enable_spinup = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control);
        enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE);
        writel(enable_spinup, &sci_phy->link_layer_registers->notify_enable_spinup_control);

        /* Change state to the final state this substate machine has run to completion */
        sci_base_state_machine_change_state(&sci_phy->starting_substate_machine,
                                            SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL);

        return SCI_SUCCESS;
}

/*
 * This method is called by the struct scic_sds_controller when the phy object is
 * granted power. - The phy state machine is transitioned to the
 * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. enum sci_status SCI_SUCCESS
 */
static enum sci_status scic_sds_phy_starting_substate_await_sata_power_consume_power_handler(
        struct scic_sds_phy *sci_phy)
{
        u32 scu_sas_pcfg_value;

        /* Release the spinup hold state and reset the OOB state machine */
        scu_sas_pcfg_value =
                readl(&sci_phy->link_layer_registers->phy_configuration);
        scu_sas_pcfg_value &=
                ~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE));
        scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
        writel(scu_sas_pcfg_value,
                &sci_phy->link_layer_registers->phy_configuration);

        /* Now restart the OOB operation */
        scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
        scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
        writel(scu_sas_pcfg_value,
                &sci_phy->link_layer_registers->phy_configuration);

        /* Change state to the final state this substate machine has run to completion */
        sci_base_state_machine_change_state(&sci_phy->starting_substate_machine,
                                            SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN);

        return SCI_SUCCESS;
}

static enum sci_status default_phy_handler(struct scic_sds_phy *sci_phy,
                                           const char *func)
{
        dev_dbg(sciphy_to_dev(sci_phy),
                 "%s: in wrong state: %d\n", func,
                 sci_base_state_machine_get_state(&sci_phy->state_machine));
        return SCI_FAILURE_INVALID_STATE;
}

static enum sci_status
scic_sds_phy_default_start_handler(struct scic_sds_phy *sci_phy)
{
        return default_phy_handler(sci_phy, __func__);
}

static enum sci_status
scic_sds_phy_default_stop_handler(struct scic_sds_phy *sci_phy)
{
        return default_phy_handler(sci_phy, __func__);
}

static enum sci_status
scic_sds_phy_default_reset_handler(struct scic_sds_phy *sci_phy)
{
        return default_phy_handler(sci_phy, __func__);
}

static enum sci_status
scic_sds_phy_default_destroy_handler(struct scic_sds_phy *sci_phy)
{
        return default_phy_handler(sci_phy, __func__);
}

static enum sci_status
scic_sds_phy_default_frame_handler(struct scic_sds_phy *sci_phy,
                                   u32 frame_index)
{
        struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy);

        default_phy_handler(sci_phy, __func__);
        scic_sds_controller_release_frame(scic, frame_index);

        return SCI_FAILURE_INVALID_STATE;
}

static enum sci_status
scic_sds_phy_default_event_handler(struct scic_sds_phy *sci_phy,
                                   u32 event_code)
{
        return default_phy_handler(sci_phy, __func__);
}

static enum sci_status
scic_sds_phy_default_consume_power_handler(struct scic_sds_phy *sci_phy)
{
        return default_phy_handler(sci_phy, __func__);
}



static const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_table[] = {
        [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = {
                .start_handler          = scic_sds_phy_default_start_handler,
                .stop_handler           = scic_sds_phy_starting_substate_general_stop_handler,
                .reset_handler          = scic_sds_phy_default_reset_handler,
                .destruct_handler       = scic_sds_phy_default_destroy_handler,
                .frame_handler          = scic_sds_phy_default_frame_handler,
                .event_handler          = scic_sds_phy_default_event_handler,
                .consume_power_handler  = scic_sds_phy_default_consume_power_handler
        },
        [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = {
                .start_handler          = scic_sds_phy_default_start_handler,
                .stop_handler           = scic_sds_phy_starting_substate_general_stop_handler,
                .reset_handler          = scic_sds_phy_default_reset_handler,
                .destruct_handler       = scic_sds_phy_default_destroy_handler,
                .frame_handler          = scic_sds_phy_default_frame_handler,
                .event_handler          = scic_sds_phy_starting_substate_await_ossp_event_handler,
                .consume_power_handler  = scic_sds_phy_default_consume_power_handler
        },
        [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = {
                .start_handler          = scic_sds_phy_default_start_handler,
                .stop_handler           = scic_sds_phy_starting_substate_general_stop_handler,
                .reset_handler          = scic_sds_phy_default_reset_handler,
                .destruct_handler       = scic_sds_phy_default_destroy_handler,
                .frame_handler          = scic_sds_phy_default_frame_handler,
                .event_handler          = scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler,
                .consume_power_handler  = scic_sds_phy_default_consume_power_handler
        },
        [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = {
                .start_handler          = scic_sds_phy_default_start_handler,
                .stop_handler           = scic_sds_phy_default_stop_handler,
                .reset_handler          = scic_sds_phy_default_reset_handler,
                .destruct_handler       = scic_sds_phy_default_destroy_handler,
                .frame_handler          = scic_sds_phy_starting_substate_await_iaf_uf_frame_handler,
                .event_handler          = scic_sds_phy_starting_substate_await_iaf_uf_event_handler,
                .consume_power_handler  = scic_sds_phy_default_consume_power_handler
        },
        [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = {
                .start_handler          = scic_sds_phy_default_start_handler,
                .stop_handler           = scic_sds_phy_starting_substate_general_stop_handler,
                .reset_handler          = scic_sds_phy_default_reset_handler,
                .destruct_handler       = scic_sds_phy_default_destroy_handler,
                .frame_handler          = scic_sds_phy_default_frame_handler,
                .event_handler          = scic_sds_phy_starting_substate_await_sas_power_event_handler,
                .consume_power_handler  = scic_sds_phy_starting_substate_await_sas_power_consume_power_handler
        },
        [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = {
                .start_handler          = scic_sds_phy_default_start_handler,
                .stop_handler           = scic_sds_phy_starting_substate_general_stop_handler,
                .reset_handler          = scic_sds_phy_default_reset_handler,
                .destruct_handler       = scic_sds_phy_default_destroy_handler,
                .frame_handler          = scic_sds_phy_default_frame_handler,
                .event_handler          = scic_sds_phy_starting_substate_await_sata_power_event_handler,
                .consume_power_handler  = scic_sds_phy_starting_substate_await_sata_power_consume_power_handler
        },
        [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = {
                .start_handler          = scic_sds_phy_default_start_handler,
                .stop_handler           = scic_sds_phy_starting_substate_general_stop_handler,
                .reset_handler          = scic_sds_phy_default_reset_handler,
                .destruct_handler       = scic_sds_phy_default_destroy_handler,
                .frame_handler          = scic_sds_phy_default_frame_handler,
                .event_handler          = scic_sds_phy_starting_substate_await_sata_phy_event_handler,
                .consume_power_handler  = scic_sds_phy_default_consume_power_handler
        },
        [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = {
                .start_handler          = scic_sds_phy_default_start_handler,
                .stop_handler           = scic_sds_phy_starting_substate_general_stop_handler,
                .reset_handler          = scic_sds_phy_default_reset_handler,
                .destruct_handler       = scic_sds_phy_default_destroy_handler,
                .frame_handler          = scic_sds_phy_default_frame_handler,
                .event_handler          = scic_sds_phy_starting_substate_await_sata_speed_event_handler,
                .consume_power_handler  = scic_sds_phy_default_consume_power_handler
        },
        [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = {
                .start_handler          = scic_sds_phy_default_start_handler,
                .stop_handler           = scic_sds_phy_starting_substate_general_stop_handler,
                .reset_handler          = scic_sds_phy_default_reset_handler,
                .destruct_handler       = scic_sds_phy_default_destroy_handler,
                .frame_handler          = scic_sds_phy_starting_substate_await_sig_fis_frame_handler,
                .event_handler          = scic_sds_phy_starting_substate_await_sig_fis_event_handler,
                .consume_power_handler  = scic_sds_phy_default_consume_power_handler
        },
        [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = {
                .start_handler          = scic_sds_phy_default_start_handler,
                .stop_handler           = scic_sds_phy_starting_substate_general_stop_handler,
                .reset_handler          = scic_sds_phy_default_reset_handler,
                .destruct_handler       = scic_sds_phy_default_destroy_handler,
                .frame_handler           = scic_sds_phy_default_frame_handler,
                .event_handler           = scic_sds_phy_default_event_handler,
                .consume_power_handler   = scic_sds_phy_default_consume_power_handler
        }
};

/**
 * scic_sds_phy_set_starting_substate_handlers() -
 *
 * This macro sets the starting substate handlers by state_id
 */
#define scic_sds_phy_set_starting_substate_handlers(phy, state_id) \
        scic_sds_phy_set_state_handlers(\
                (phy), \
                &scic_sds_phy_starting_substate_handler_table[(state_id)] \
                )

/*
 * ****************************************************************************
 * *  PHY STARTING SUBSTATE METHODS
 * **************************************************************************** */

/**
 * scic_sds_phy_starting_initial_substate_enter -
 * @object: This is the object which is cast to a struct scic_sds_phy object.
 *
 * This method will perform the actions required by the struct scic_sds_phy on
 * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL. - The initial state
 * handlers are put in place for the struct scic_sds_phy object. - The state is
 * changed to the wait phy type event notification. none
 */
static void scic_sds_phy_starting_initial_substate_enter(void *object)
{
        struct scic_sds_phy *sci_phy = object;

        scic_sds_phy_set_starting_substate_handlers(
                sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL);

        /* This is just an temporary state go off to the starting state */
        sci_base_state_machine_change_state(&sci_phy->starting_substate_machine,
                                            SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN);
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_phy object.
 *
 * This method will perform the actions required by the struct scic_sds_phy on
 * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_PHY_TYPE_EN. - Set the
 * struct scic_sds_phy object state handlers for this state. none
 */
static void scic_sds_phy_starting_await_ossp_en_substate_enter(void *object)
{
        struct scic_sds_phy *sci_phy = object;

        scic_sds_phy_set_starting_substate_handlers(
                sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN
                );
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_phy object.
 *
 * This method will perform the actions required by the struct scic_sds_phy on
 * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - Set the
 * struct scic_sds_phy object state handlers for this state. none
 */
static void scic_sds_phy_starting_await_sas_speed_en_substate_enter(
                void *object)
{
        struct scic_sds_phy *sci_phy = object;

        scic_sds_phy_set_starting_substate_handlers(
                sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN
                );
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_phy object.
 *
 * This method will perform the actions required by the struct scic_sds_phy on
 * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Set the
 * struct scic_sds_phy object state handlers for this state. none
 */
static void scic_sds_phy_starting_await_iaf_uf_substate_enter(void *object)
{
        struct scic_sds_phy *sci_phy = object;

        scic_sds_phy_set_starting_substate_handlers(
                sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF
                );
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_phy object.
 *
 * This method will perform the actions required by the struct scic_sds_phy on
 * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Set the
 * struct scic_sds_phy object state handlers for this state. - Add this phy object to
 * the power control queue none
 */
static void scic_sds_phy_starting_await_sas_power_substate_enter(void *object)
{
        struct scic_sds_phy *sci_phy = object;

        scic_sds_phy_set_starting_substate_handlers(
                sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER
                );

        scic_sds_controller_power_control_queue_insert(
                scic_sds_phy_get_controller(sci_phy),
                sci_phy
                );
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_phy object.
 *
 * This method will perform the actions required by the struct scic_sds_phy on exiting
 * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Remove the
 * struct scic_sds_phy object from the power control queue. none
 */
static void scic_sds_phy_starting_await_sas_power_substate_exit(void *object)
{
        struct scic_sds_phy *sci_phy = object;

        scic_sds_controller_power_control_queue_remove(
                scic_sds_phy_get_controller(sci_phy), sci_phy
                );
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_phy object.
 *
 * This method will perform the actions required by the struct scic_sds_phy on
 * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Set the
 * struct scic_sds_phy object state handlers for this state. - Add this phy object to
 * the power control queue none
 */
static void scic_sds_phy_starting_await_sata_power_substate_enter(void *object)
{
        struct scic_sds_phy *sci_phy = object;

        scic_sds_phy_set_starting_substate_handlers(
                sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER
                );

        scic_sds_controller_power_control_queue_insert(
                scic_sds_phy_get_controller(sci_phy),
                sci_phy
                );
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_phy object.
 *
 * This method will perform the actions required by the struct scic_sds_phy on exiting
 * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Remove the
 * struct scic_sds_phy object from the power control queue. none
 */
static void scic_sds_phy_starting_await_sata_power_substate_exit(void *object)
{
        struct scic_sds_phy *sci_phy = object;

        scic_sds_controller_power_control_queue_remove(
                scic_sds_phy_get_controller(sci_phy),
                sci_phy
                );
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_phy object.
 *
 * This function will perform the actions required by the struct scic_sds_phy on
 * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. - Set the
 * struct scic_sds_phy object state handlers for this state. none
 */
static void scic_sds_phy_starting_await_sata_phy_substate_enter(void *object)
{
        struct scic_sds_phy *sci_phy = object;

        scic_sds_phy_set_starting_substate_handlers(
                        sci_phy,
                        SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN);

        isci_timer_start(sci_phy->sata_timeout_timer,
                         SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT);
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_phy object.
 *
 * This method will perform the actions required by the struct scic_sds_phy
 * on exiting
 * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer
 * that was started on entry to await sata phy event notification none
 */
static inline void scic_sds_phy_starting_await_sata_phy_substate_exit(
                void *object)
{
        struct scic_sds_phy *sci_phy = object;

        isci_timer_stop(sci_phy->sata_timeout_timer);
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_phy object.
 *
 * This method will perform the actions required by the struct scic_sds_phy on
 * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - Set the
 * struct scic_sds_phy object state handlers for this state. none
 */
static void scic_sds_phy_starting_await_sata_speed_substate_enter(void *object)
{
        struct scic_sds_phy *sci_phy = object;

        scic_sds_phy_set_starting_substate_handlers(
                        sci_phy,
                        SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN);

        isci_timer_start(sci_phy->sata_timeout_timer,
                         SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT);
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_phy object.
 *
 * This function will perform the actions required by the
 * struct scic_sds_phy on exiting
 * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer
 * that was started on entry to await sata phy event notification none
 */
static inline void scic_sds_phy_starting_await_sata_speed_substate_exit(
        void *object)
{
        struct scic_sds_phy *sci_phy = object;

        isci_timer_stop(sci_phy->sata_timeout_timer);
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_phy object.
 *
 * This function will perform the actions required by the struct scic_sds_phy on
 * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Set the
 * struct scic_sds_phy object state handlers for this state.
 * - Start the SIGNATURE FIS
 * timeout timer none
 */
static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(void *object)
{
        bool continue_to_ready_state;
        struct scic_sds_phy *sci_phy = object;

        scic_sds_phy_set_starting_substate_handlers(
                        sci_phy,
                        SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF);

        continue_to_ready_state = scic_sds_port_link_detected(
                sci_phy->owning_port,
                sci_phy);

        if (continue_to_ready_state) {
                /*
                 * Clear the PE suspend condition so we can actually
                 * receive SIG FIS
                 * The hardware will not respond to the XRDY until the PE
                 * suspend condition is cleared.
                 */
                scic_sds_phy_resume(sci_phy);

                isci_timer_start(sci_phy->sata_timeout_timer,
                                 SCIC_SDS_SIGNATURE_FIS_TIMEOUT);
        } else
                sci_phy->is_in_link_training = false;
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_phy object.
 *
 * This function will perform the actions required by the
 * struct scic_sds_phy on exiting
 * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Stop the SIGNATURE
 * FIS timeout timer. none
 */
static inline void scic_sds_phy_starting_await_sig_fis_uf_substate_exit(
        void *object)
{
        struct scic_sds_phy *sci_phy = object;

        isci_timer_stop(sci_phy->sata_timeout_timer);
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_phy object.
 *
 * This method will perform the actions required by the struct scic_sds_phy on
 * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. - Set the struct scic_sds_phy
 * object state handlers for this state. - Change base state machine to the
 * ready state. none
 */
static void scic_sds_phy_starting_final_substate_enter(void *object)
{
        struct scic_sds_phy *sci_phy = object;

        scic_sds_phy_set_starting_substate_handlers(sci_phy,
                                                    SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL);

        /* State machine has run to completion so exit out and change
         * the base state machine to the ready state
         */
        sci_base_state_machine_change_state(&sci_phy->state_machine,
                                            SCI_BASE_PHY_STATE_READY);
}

/* --------------------------------------------------------------------------- */

static const struct sci_base_state scic_sds_phy_starting_substates[] = {
        [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = {
                .enter_state = scic_sds_phy_starting_initial_substate_enter,
        },
        [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = {
                .enter_state = scic_sds_phy_starting_await_ossp_en_substate_enter,
        },
        [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = {
                .enter_state = scic_sds_phy_starting_await_sas_speed_en_substate_enter,
        },
        [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = {
                .enter_state = scic_sds_phy_starting_await_iaf_uf_substate_enter,
        },
        [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = {
                .enter_state = scic_sds_phy_starting_await_sas_power_substate_enter,
                .exit_state  = scic_sds_phy_starting_await_sas_power_substate_exit,
        },
        [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = {
                .enter_state = scic_sds_phy_starting_await_sata_power_substate_enter,
                .exit_state  = scic_sds_phy_starting_await_sata_power_substate_exit
        },
        [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = {
                .enter_state = scic_sds_phy_starting_await_sata_phy_substate_enter,
                .exit_state  = scic_sds_phy_starting_await_sata_phy_substate_exit
        },
        [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = {
                .enter_state = scic_sds_phy_starting_await_sata_speed_substate_enter,
                .exit_state  = scic_sds_phy_starting_await_sata_speed_substate_exit
        },
        [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = {
                .enter_state = scic_sds_phy_starting_await_sig_fis_uf_substate_enter,
                .exit_state  = scic_sds_phy_starting_await_sig_fis_uf_substate_exit
        },
        [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = {
                .enter_state = scic_sds_phy_starting_final_substate_enter,
        }
};

/*
 * This method takes the struct scic_sds_phy from a stopped state and
 * attempts to start it. - The phy state machine is transitioned to the
 * SCI_BASE_PHY_STATE_STARTING. enum sci_status SCI_SUCCESS
 */
static enum sci_status
scic_sds_phy_stopped_state_start_handler(struct scic_sds_phy *sci_phy)
{
        struct isci_host *ihost;
        struct scic_sds_controller *scic;

        scic = scic_sds_phy_get_controller(sci_phy),
        ihost = scic->ihost;

        /* Create the SIGNATURE FIS Timeout timer for this phy */
        sci_phy->sata_timeout_timer = isci_timer_create(ihost, sci_phy,
                                                        scic_sds_phy_sata_timeout);

        if (sci_phy->sata_timeout_timer)
                sci_base_state_machine_change_state(&sci_phy->state_machine,
                                                    SCI_BASE_PHY_STATE_STARTING);

        return SCI_SUCCESS;
}

static enum sci_status
scic_sds_phy_stopped_state_destroy_handler(struct scic_sds_phy *sci_phy)
{
        return SCI_SUCCESS;
}

static enum sci_status
scic_sds_phy_ready_state_stop_handler(struct scic_sds_phy *sci_phy)
{
        sci_base_state_machine_change_state(&sci_phy->state_machine,
                                            SCI_BASE_PHY_STATE_STOPPED);

        return SCI_SUCCESS;
}

static enum sci_status
scic_sds_phy_ready_state_reset_handler(struct scic_sds_phy *sci_phy)
{
        sci_base_state_machine_change_state(&sci_phy->state_machine,
                                            SCI_BASE_PHY_STATE_RESETTING);

        return SCI_SUCCESS;
}

/**
 * scic_sds_phy_ready_state_event_handler -
 * @phy: This is the struct scic_sds_phy object which has received the event.
 *
 * This method request the struct scic_sds_phy handle the received event.  The only
 * event that we are interested in while in the ready state is the link failure
 * event. - decoded event is a link failure - transition the struct scic_sds_phy back
 * to the SCI_BASE_PHY_STATE_STARTING state. - any other event received will
 * report a warning message enum sci_status SCI_SUCCESS if the event received is a
 * link failure SCI_FAILURE_INVALID_STATE for any other event received.
 */
static enum sci_status scic_sds_phy_ready_state_event_handler(struct scic_sds_phy *sci_phy,
                                                              u32 event_code)
{
        enum sci_status result = SCI_FAILURE;

        switch (scu_get_event_code(event_code)) {
        case SCU_EVENT_LINK_FAILURE:
                /* Link failure change state back to the starting state */
                sci_base_state_machine_change_state(&sci_phy->state_machine,
                                                    SCI_BASE_PHY_STATE_STARTING);
                result = SCI_SUCCESS;
                break;

        case SCU_EVENT_BROADCAST_CHANGE:
                /* Broadcast change received. Notify the port. */
                if (scic_sds_phy_get_port(sci_phy) != NULL)
                        scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy);
                else
                        sci_phy->bcn_received_while_port_unassigned = true;
                break;

        default:
                dev_warn(sciphy_to_dev(sci_phy),
                         "%sP SCIC PHY 0x%p ready state machine received "
                         "unexpected event_code %x\n",
                         __func__, sci_phy, event_code);

                result = SCI_FAILURE_INVALID_STATE;
                break;
        }

        return result;
}

static enum sci_status scic_sds_phy_resetting_state_event_handler(struct scic_sds_phy *sci_phy,
                                                                  u32 event_code)
{
        enum sci_status result = SCI_FAILURE;

        switch (scu_get_event_code(event_code)) {
        case SCU_EVENT_HARD_RESET_TRANSMITTED:
                /* Link failure change state back to the starting state */
                sci_base_state_machine_change_state(&sci_phy->state_machine,
                                                    SCI_BASE_PHY_STATE_STARTING);
                result = SCI_SUCCESS;
                break;

        default:
                dev_warn(sciphy_to_dev(sci_phy),
                         "%s: SCIC PHY 0x%p resetting state machine received "
                         "unexpected event_code %x\n",
                         __func__, sci_phy, event_code);

                result = SCI_FAILURE_INVALID_STATE;
                break;
        }

        return result;
}

/* --------------------------------------------------------------------------- */

static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = {
        [SCI_BASE_PHY_STATE_INITIAL] = {
                .start_handler = scic_sds_phy_default_start_handler,
                .stop_handler  = scic_sds_phy_default_stop_handler,
                .reset_handler = scic_sds_phy_default_reset_handler,
                .destruct_handler = scic_sds_phy_default_destroy_handler,
                .frame_handler           = scic_sds_phy_default_frame_handler,
                .event_handler           = scic_sds_phy_default_event_handler,
                .consume_power_handler   = scic_sds_phy_default_consume_power_handler
        },
        [SCI_BASE_PHY_STATE_STOPPED]  = {
                .start_handler = scic_sds_phy_stopped_state_start_handler,
                .stop_handler  = scic_sds_phy_default_stop_handler,
                .reset_handler = scic_sds_phy_default_reset_handler,
                .destruct_handler = scic_sds_phy_stopped_state_destroy_handler,
                .frame_handler           = scic_sds_phy_default_frame_handler,
                .event_handler           = scic_sds_phy_default_event_handler,
                .consume_power_handler   = scic_sds_phy_default_consume_power_handler
        },
        [SCI_BASE_PHY_STATE_STARTING] = {
                .start_handler = scic_sds_phy_default_start_handler,
                .stop_handler  = scic_sds_phy_default_stop_handler,
                .reset_handler = scic_sds_phy_default_reset_handler,
                .destruct_handler = scic_sds_phy_default_destroy_handler,
                .frame_handler           = scic_sds_phy_default_frame_handler,
                .event_handler           = scic_sds_phy_default_event_handler,
                .consume_power_handler   = scic_sds_phy_default_consume_power_handler
        },
        [SCI_BASE_PHY_STATE_READY] = {
                .start_handler = scic_sds_phy_default_start_handler,
                .stop_handler  = scic_sds_phy_ready_state_stop_handler,
                .reset_handler = scic_sds_phy_ready_state_reset_handler,
                .destruct_handler = scic_sds_phy_default_destroy_handler,
                .frame_handler           = scic_sds_phy_default_frame_handler,
                .event_handler           = scic_sds_phy_ready_state_event_handler,
                .consume_power_handler   = scic_sds_phy_default_consume_power_handler
        },
        [SCI_BASE_PHY_STATE_RESETTING] = {
                .start_handler = scic_sds_phy_default_start_handler,
                .stop_handler  = scic_sds_phy_default_stop_handler,
                .reset_handler = scic_sds_phy_default_reset_handler,
                .destruct_handler = scic_sds_phy_default_destroy_handler,
                .frame_handler           = scic_sds_phy_default_frame_handler,
                .event_handler           = scic_sds_phy_resetting_state_event_handler,
                .consume_power_handler   = scic_sds_phy_default_consume_power_handler
        },
        [SCI_BASE_PHY_STATE_FINAL] = {
                .start_handler = scic_sds_phy_default_start_handler,
                .stop_handler  = scic_sds_phy_default_stop_handler,
                .reset_handler = scic_sds_phy_default_reset_handler,
                .destruct_handler = scic_sds_phy_default_destroy_handler,
                .frame_handler           = scic_sds_phy_default_frame_handler,
                .event_handler           = scic_sds_phy_default_event_handler,
                .consume_power_handler   = scic_sds_phy_default_consume_power_handler
        }
};

/*
 * ****************************************************************************
 * *  PHY STATE PRIVATE METHODS
 * **************************************************************************** */

/**
 *
 * @sci_phy: This is the struct scic_sds_phy object to stop.
 *
 * This method will stop the struct scic_sds_phy object. This does not reset the
 * protocol engine it just suspends it and places it in a state where it will
 * not cause the end device to power up. none
 */
static void scu_link_layer_stop_protocol_engine(
        struct scic_sds_phy *sci_phy)
{
        u32 scu_sas_pcfg_value;
        u32 enable_spinup_value;

        /* Suspend the protocol engine and place it in a sata spinup hold state */
        scu_sas_pcfg_value =
                readl(&sci_phy->link_layer_registers->phy_configuration);
        scu_sas_pcfg_value |=
                (SCU_SAS_PCFG_GEN_BIT(OOB_RESET) |
                 SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE) |
                 SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD));
        writel(scu_sas_pcfg_value,
               &sci_phy->link_layer_registers->phy_configuration);

        /* Disable the notify enable spinup primitives */
        enable_spinup_value = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control);
        enable_spinup_value &= ~SCU_ENSPINUP_GEN_BIT(ENABLE);
        writel(enable_spinup_value, &sci_phy->link_layer_registers->notify_enable_spinup_control);
}

/**
 *
 *
 * This method will start the OOB/SN state machine for this struct scic_sds_phy object.
 */
static void scu_link_layer_start_oob(
        struct scic_sds_phy *sci_phy)
{
        u32 scu_sas_pcfg_value;

        scu_sas_pcfg_value =
                readl(&sci_phy->link_layer_registers->phy_configuration);
        scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
        scu_sas_pcfg_value &=
                ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) |
                SCU_SAS_PCFG_GEN_BIT(HARD_RESET));
        writel(scu_sas_pcfg_value,
               &sci_phy->link_layer_registers->phy_configuration);
}

/**
 *
 *
 * This method will transmit a hard reset request on the specified phy. The SCU
 * hardware requires that we reset the OOB state machine and set the hard reset
 * bit in the phy configuration register. We then must start OOB over with the
 * hard reset bit set.
 */
static void scu_link_layer_tx_hard_reset(
        struct scic_sds_phy *sci_phy)
{
        u32 phy_configuration_value;

        /*
         * SAS Phys must wait for the HARD_RESET_TX event notification to transition
         * to the starting state. */
        phy_configuration_value =
                readl(&sci_phy->link_layer_registers->phy_configuration);
        phy_configuration_value |=
                (SCU_SAS_PCFG_GEN_BIT(HARD_RESET) |
                 SCU_SAS_PCFG_GEN_BIT(OOB_RESET));
        writel(phy_configuration_value,
               &sci_phy->link_layer_registers->phy_configuration);

        /* Now take the OOB state machine out of reset */
        phy_configuration_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
        phy_configuration_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
        writel(phy_configuration_value,
               &sci_phy->link_layer_registers->phy_configuration);
}

/*
 * ****************************************************************************
 * *  PHY BASE STATE METHODS
 * **************************************************************************** */

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_phy object.
 *
 * This method will perform the actions required by the struct scic_sds_phy on
 * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state
 * handlers for the phy object base state machine initial state. none
 */
static void scic_sds_phy_initial_state_enter(void *object)
{
        struct scic_sds_phy *sci_phy = object;

        scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_INITIAL);
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_phy object.
 *
 * This function will perform the actions required by the struct scic_sds_phy on
 * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state
 * handlers for the phy object base state machine initial state. - The SCU
 * hardware is requested to stop the protocol engine. none
 */
static void scic_sds_phy_stopped_state_enter(void *object)
{
        struct scic_sds_phy *sci_phy = object;
        struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy);
        struct isci_host *ihost = scic->ihost;

        /*
         * @todo We need to get to the controller to place this PE in a
         * reset state
         */

        scic_sds_phy_set_base_state_handlers(sci_phy,
                                             SCI_BASE_PHY_STATE_STOPPED);

        if (sci_phy->sata_timeout_timer != NULL) {
                isci_del_timer(ihost, sci_phy->sata_timeout_timer);

                sci_phy->sata_timeout_timer = NULL;
        }

        scu_link_layer_stop_protocol_engine(sci_phy);

        if (sci_phy->state_machine.previous_state_id !=
                        SCI_BASE_PHY_STATE_INITIAL)
                scic_sds_controller_link_down(
                                scic_sds_phy_get_controller(sci_phy),
                                scic_sds_phy_get_port(sci_phy),
                                sci_phy);
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_phy object.
 *
 * This method will perform the actions required by the struct scic_sds_phy on
 * entering the SCI_BASE_PHY_STATE_STARTING. - This function sets the state
 * handlers for the phy object base state machine starting state. - The SCU
 * hardware is requested to start OOB/SN on this protocl engine. - The phy
 * starting substate machine is started. - If the previous state was the ready
 * state then the struct scic_sds_controller is informed that the phy has gone link
 * down. none
 */
static void scic_sds_phy_starting_state_enter(void *object)
{
        struct scic_sds_phy *sci_phy = object;

        scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_STARTING);

        scu_link_layer_stop_protocol_engine(sci_phy);
        scu_link_layer_start_oob(sci_phy);

        /* We don't know what kind of phy we are going to be just yet */
        sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN;
        sci_phy->bcn_received_while_port_unassigned = false;

        /* Change over to the starting substate machine to continue */
        sci_base_state_machine_start(&sci_phy->starting_substate_machine);

        if (sci_phy->state_machine.previous_state_id
            == SCI_BASE_PHY_STATE_READY) {
                scic_sds_controller_link_down(
                        scic_sds_phy_get_controller(sci_phy),
                        scic_sds_phy_get_port(sci_phy),
                        sci_phy
                        );
        }
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_phy object.
 *
 * This method will perform the actions required by the struct scic_sds_phy on
 * entering the SCI_BASE_PHY_STATE_READY. - This function sets the state
 * handlers for the phy object base state machine ready state. - The SCU
 * hardware protocol engine is resumed. - The struct scic_sds_controller is informed
 * that the phy object has gone link up. none
 */
static void scic_sds_phy_ready_state_enter(void *object)
{
        struct scic_sds_phy *sci_phy = object;

        scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_READY);

        scic_sds_controller_link_up(
                scic_sds_phy_get_controller(sci_phy),
                scic_sds_phy_get_port(sci_phy),
                sci_phy
                );
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_phy object.
 *
 * This method will perform the actions required by the struct scic_sds_phy on exiting
 * the SCI_BASE_PHY_STATE_INITIAL. This function suspends the SCU hardware
 * protocol engine represented by this struct scic_sds_phy object. none
 */
static void scic_sds_phy_ready_state_exit(void *object)
{
        struct scic_sds_phy *sci_phy = object;

        scic_sds_phy_suspend(sci_phy);
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_phy object.
 *
 * This method will perform the actions required by the struct scic_sds_phy on
 * entering the SCI_BASE_PHY_STATE_RESETTING. - This function sets the state
 * handlers for the phy object base state machine resetting state. none
 */
static void scic_sds_phy_resetting_state_enter(void *object)
{
        struct scic_sds_phy *sci_phy = object;

        scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_RESETTING);

        /*
         * The phy is being reset, therefore deactivate it from the port.
         * In the resetting state we don't notify the user regarding
         * link up and link down notifications. */
        scic_sds_port_deactivate_phy(sci_phy->owning_port, sci_phy, false);

        if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) {
                scu_link_layer_tx_hard_reset(sci_phy);
        } else {
                /*
                 * The SCU does not need to have a discrete reset state so
                 * just go back to the starting state.
                 */
                sci_base_state_machine_change_state(
                                &sci_phy->state_machine,
                                SCI_BASE_PHY_STATE_STARTING);
        }
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_phy object.
 *
 * This method will perform the actions required by the struct scic_sds_phy on
 * entering the SCI_BASE_PHY_STATE_FINAL. - This function sets the state
 * handlers for the phy object base state machine final state. none
 */
static void scic_sds_phy_final_state_enter(void *object)
{
        struct scic_sds_phy *sci_phy = object;

        scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_FINAL);

        /* Nothing to do here */
}

/* --------------------------------------------------------------------------- */

static const struct sci_base_state scic_sds_phy_state_table[] = {
        [SCI_BASE_PHY_STATE_INITIAL] = {
                .enter_state = scic_sds_phy_initial_state_enter,
        },
        [SCI_BASE_PHY_STATE_STOPPED] = {
                .enter_state = scic_sds_phy_stopped_state_enter,
        },
        [SCI_BASE_PHY_STATE_STARTING] = {
                .enter_state = scic_sds_phy_starting_state_enter,
        },
        [SCI_BASE_PHY_STATE_READY] = {
                .enter_state = scic_sds_phy_ready_state_enter,
                .exit_state = scic_sds_phy_ready_state_exit,
        },
        [SCI_BASE_PHY_STATE_RESETTING] = {
                .enter_state = scic_sds_phy_resetting_state_enter,
        },
        [SCI_BASE_PHY_STATE_FINAL] = {
                .enter_state = scic_sds_phy_final_state_enter,
        },
};

void scic_sds_phy_construct(struct scic_sds_phy *sci_phy,
                            struct scic_sds_port *owning_port, u8 phy_index)
{
        sci_base_state_machine_construct(&sci_phy->state_machine,
                                         sci_phy,
                                         scic_sds_phy_state_table,
                                         SCI_BASE_PHY_STATE_INITIAL);

        sci_base_state_machine_start(&sci_phy->state_machine);

        /* Copy the rest of the input data to our locals */
        sci_phy->owning_port = owning_port;
        sci_phy->phy_index = phy_index;
        sci_phy->bcn_received_while_port_unassigned = false;
        sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN;
        sci_phy->link_layer_registers = NULL;
        sci_phy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN;
        sci_phy->sata_timeout_timer = NULL;

        /* Initialize the the substate machines */
        sci_base_state_machine_construct(&sci_phy->starting_substate_machine,
                                         sci_phy,
                                         scic_sds_phy_starting_substates,
                                         SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL);
}