libertas: fix memory corruption in lbs_remove_card()
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / wireless / libertas / main.c
blobfcd1bbfc632d527364b8f1fc91abd70ba3242225
1 /**
2 * This file contains the major functions in WLAN
3 * driver. It includes init, exit, open, close and main
4 * thread etc..
5 */
7 #include <linux/moduleparam.h>
8 #include <linux/delay.h>
9 #include <linux/etherdevice.h>
10 #include <linux/netdevice.h>
11 #include <linux/if_arp.h>
12 #include <linux/kthread.h>
13 #include <linux/kfifo.h>
14 #include <linux/slab.h>
15 #include <net/cfg80211.h>
17 #include "host.h"
18 #include "decl.h"
19 #include "dev.h"
20 #include "cfg.h"
21 #include "debugfs.h"
22 #include "cmd.h"
24 #define DRIVER_RELEASE_VERSION "323.p0"
25 const char lbs_driver_version[] = "COMM-USB8388-" DRIVER_RELEASE_VERSION
26 #ifdef DEBUG
27 "-dbg"
28 #endif
29 "";
32 /* Module parameters */
33 unsigned int lbs_debug;
34 EXPORT_SYMBOL_GPL(lbs_debug);
35 module_param_named(libertas_debug, lbs_debug, int, 0644);
38 /* This global structure is used to send the confirm_sleep command as
39 * fast as possible down to the firmware. */
40 struct cmd_confirm_sleep confirm_sleep;
43 /**
44 * the table to keep region code
46 u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE] =
47 { 0x10, 0x20, 0x30, 0x31, 0x32, 0x40 };
49 /**
50 * FW rate table. FW refers to rates by their index in this table, not by the
51 * rate value itself. Values of 0x00 are
52 * reserved positions.
54 static u8 fw_data_rates[MAX_RATES] =
55 { 0x02, 0x04, 0x0B, 0x16, 0x00, 0x0C, 0x12,
56 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C, 0x00
59 /**
60 * @brief use index to get the data rate
62 * @param idx The index of data rate
63 * @return data rate or 0
65 u32 lbs_fw_index_to_data_rate(u8 idx)
67 if (idx >= sizeof(fw_data_rates))
68 idx = 0;
69 return fw_data_rates[idx];
72 /**
73 * @brief use rate to get the index
75 * @param rate data rate
76 * @return index or 0
78 u8 lbs_data_rate_to_fw_index(u32 rate)
80 u8 i;
82 if (!rate)
83 return 0;
85 for (i = 0; i < sizeof(fw_data_rates); i++) {
86 if (rate == fw_data_rates[i])
87 return i;
89 return 0;
93 /**
94 * @brief This function opens the ethX interface
96 * @param dev A pointer to net_device structure
97 * @return 0 or -EBUSY if monitor mode active
99 static int lbs_dev_open(struct net_device *dev)
101 struct lbs_private *priv = dev->ml_priv;
102 int ret = 0;
104 lbs_deb_enter(LBS_DEB_NET);
106 spin_lock_irq(&priv->driver_lock);
107 priv->stopping = false;
109 if (priv->connect_status == LBS_CONNECTED)
110 netif_carrier_on(dev);
111 else
112 netif_carrier_off(dev);
114 if (!priv->tx_pending_len)
115 netif_wake_queue(dev);
117 spin_unlock_irq(&priv->driver_lock);
118 lbs_deb_leave_args(LBS_DEB_NET, "ret %d", ret);
119 return ret;
123 * @brief This function closes the ethX interface
125 * @param dev A pointer to net_device structure
126 * @return 0
128 static int lbs_eth_stop(struct net_device *dev)
130 struct lbs_private *priv = dev->ml_priv;
132 lbs_deb_enter(LBS_DEB_NET);
134 spin_lock_irq(&priv->driver_lock);
135 priv->stopping = true;
136 netif_stop_queue(dev);
137 spin_unlock_irq(&priv->driver_lock);
139 schedule_work(&priv->mcast_work);
140 cancel_delayed_work_sync(&priv->scan_work);
141 if (priv->scan_req) {
142 cfg80211_scan_done(priv->scan_req, false);
143 priv->scan_req = NULL;
146 lbs_deb_leave(LBS_DEB_NET);
147 return 0;
150 static void lbs_tx_timeout(struct net_device *dev)
152 struct lbs_private *priv = dev->ml_priv;
154 lbs_deb_enter(LBS_DEB_TX);
156 lbs_pr_err("tx watch dog timeout\n");
158 dev->trans_start = jiffies; /* prevent tx timeout */
160 if (priv->currenttxskb)
161 lbs_send_tx_feedback(priv, 0);
163 /* XX: Shouldn't we also call into the hw-specific driver
164 to kick it somehow? */
165 lbs_host_to_card_done(priv);
167 /* FIXME: reset the card */
169 lbs_deb_leave(LBS_DEB_TX);
172 void lbs_host_to_card_done(struct lbs_private *priv)
174 unsigned long flags;
176 lbs_deb_enter(LBS_DEB_THREAD);
178 spin_lock_irqsave(&priv->driver_lock, flags);
180 priv->dnld_sent = DNLD_RES_RECEIVED;
182 /* Wake main thread if commands are pending */
183 if (!priv->cur_cmd || priv->tx_pending_len > 0) {
184 if (!priv->wakeup_dev_required)
185 wake_up_interruptible(&priv->waitq);
188 spin_unlock_irqrestore(&priv->driver_lock, flags);
189 lbs_deb_leave(LBS_DEB_THREAD);
191 EXPORT_SYMBOL_GPL(lbs_host_to_card_done);
193 int lbs_set_mac_address(struct net_device *dev, void *addr)
195 int ret = 0;
196 struct lbs_private *priv = dev->ml_priv;
197 struct sockaddr *phwaddr = addr;
198 struct cmd_ds_802_11_mac_address cmd;
200 lbs_deb_enter(LBS_DEB_NET);
202 /* In case it was called from the mesh device */
203 dev = priv->dev;
205 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
206 cmd.action = cpu_to_le16(CMD_ACT_SET);
207 memcpy(cmd.macadd, phwaddr->sa_data, ETH_ALEN);
209 ret = lbs_cmd_with_response(priv, CMD_802_11_MAC_ADDRESS, &cmd);
210 if (ret) {
211 lbs_deb_net("set MAC address failed\n");
212 goto done;
215 memcpy(priv->current_addr, phwaddr->sa_data, ETH_ALEN);
216 memcpy(dev->dev_addr, phwaddr->sa_data, ETH_ALEN);
217 if (priv->mesh_dev)
218 memcpy(priv->mesh_dev->dev_addr, phwaddr->sa_data, ETH_ALEN);
220 done:
221 lbs_deb_leave_args(LBS_DEB_NET, "ret %d", ret);
222 return ret;
226 static inline int mac_in_list(unsigned char *list, int list_len,
227 unsigned char *mac)
229 while (list_len) {
230 if (!memcmp(list, mac, ETH_ALEN))
231 return 1;
232 list += ETH_ALEN;
233 list_len--;
235 return 0;
239 static int lbs_add_mcast_addrs(struct cmd_ds_mac_multicast_adr *cmd,
240 struct net_device *dev, int nr_addrs)
242 int i = nr_addrs;
243 struct netdev_hw_addr *ha;
244 int cnt;
246 if ((dev->flags & (IFF_UP|IFF_MULTICAST)) != (IFF_UP|IFF_MULTICAST))
247 return nr_addrs;
249 netif_addr_lock_bh(dev);
250 cnt = netdev_mc_count(dev);
251 netdev_for_each_mc_addr(ha, dev) {
252 if (mac_in_list(cmd->maclist, nr_addrs, ha->addr)) {
253 lbs_deb_net("mcast address %s:%pM skipped\n", dev->name,
254 ha->addr);
255 cnt--;
256 continue;
259 if (i == MRVDRV_MAX_MULTICAST_LIST_SIZE)
260 break;
261 memcpy(&cmd->maclist[6*i], ha->addr, ETH_ALEN);
262 lbs_deb_net("mcast address %s:%pM added to filter\n", dev->name,
263 ha->addr);
264 i++;
265 cnt--;
267 netif_addr_unlock_bh(dev);
268 if (cnt)
269 return -EOVERFLOW;
271 return i;
274 static void lbs_set_mcast_worker(struct work_struct *work)
276 struct lbs_private *priv = container_of(work, struct lbs_private, mcast_work);
277 struct cmd_ds_mac_multicast_adr mcast_cmd;
278 int dev_flags;
279 int nr_addrs;
280 int old_mac_control = priv->mac_control;
282 lbs_deb_enter(LBS_DEB_NET);
284 dev_flags = priv->dev->flags;
285 if (priv->mesh_dev)
286 dev_flags |= priv->mesh_dev->flags;
288 if (dev_flags & IFF_PROMISC) {
289 priv->mac_control |= CMD_ACT_MAC_PROMISCUOUS_ENABLE;
290 priv->mac_control &= ~(CMD_ACT_MAC_ALL_MULTICAST_ENABLE |
291 CMD_ACT_MAC_MULTICAST_ENABLE);
292 goto out_set_mac_control;
293 } else if (dev_flags & IFF_ALLMULTI) {
294 do_allmulti:
295 priv->mac_control |= CMD_ACT_MAC_ALL_MULTICAST_ENABLE;
296 priv->mac_control &= ~(CMD_ACT_MAC_PROMISCUOUS_ENABLE |
297 CMD_ACT_MAC_MULTICAST_ENABLE);
298 goto out_set_mac_control;
301 /* Once for priv->dev, again for priv->mesh_dev if it exists */
302 nr_addrs = lbs_add_mcast_addrs(&mcast_cmd, priv->dev, 0);
303 if (nr_addrs >= 0 && priv->mesh_dev)
304 nr_addrs = lbs_add_mcast_addrs(&mcast_cmd, priv->mesh_dev, nr_addrs);
305 if (nr_addrs < 0)
306 goto do_allmulti;
308 if (nr_addrs) {
309 int size = offsetof(struct cmd_ds_mac_multicast_adr,
310 maclist[6*nr_addrs]);
312 mcast_cmd.action = cpu_to_le16(CMD_ACT_SET);
313 mcast_cmd.hdr.size = cpu_to_le16(size);
314 mcast_cmd.nr_of_adrs = cpu_to_le16(nr_addrs);
316 lbs_cmd_async(priv, CMD_MAC_MULTICAST_ADR, &mcast_cmd.hdr, size);
318 priv->mac_control |= CMD_ACT_MAC_MULTICAST_ENABLE;
319 } else
320 priv->mac_control &= ~CMD_ACT_MAC_MULTICAST_ENABLE;
322 priv->mac_control &= ~(CMD_ACT_MAC_PROMISCUOUS_ENABLE |
323 CMD_ACT_MAC_ALL_MULTICAST_ENABLE);
324 out_set_mac_control:
325 if (priv->mac_control != old_mac_control)
326 lbs_set_mac_control(priv);
328 lbs_deb_leave(LBS_DEB_NET);
331 void lbs_set_multicast_list(struct net_device *dev)
333 struct lbs_private *priv = dev->ml_priv;
335 schedule_work(&priv->mcast_work);
339 * @brief This function handles the major jobs in the LBS driver.
340 * It handles all events generated by firmware, RX data received
341 * from firmware and TX data sent from kernel.
343 * @param data A pointer to lbs_thread structure
344 * @return 0
346 static int lbs_thread(void *data)
348 struct net_device *dev = data;
349 struct lbs_private *priv = dev->ml_priv;
350 wait_queue_t wait;
352 lbs_deb_enter(LBS_DEB_THREAD);
354 init_waitqueue_entry(&wait, current);
356 for (;;) {
357 int shouldsleep;
358 u8 resp_idx;
360 lbs_deb_thread("1: currenttxskb %p, dnld_sent %d\n",
361 priv->currenttxskb, priv->dnld_sent);
363 add_wait_queue(&priv->waitq, &wait);
364 set_current_state(TASK_INTERRUPTIBLE);
365 spin_lock_irq(&priv->driver_lock);
367 if (kthread_should_stop())
368 shouldsleep = 0; /* Bye */
369 else if (priv->surpriseremoved)
370 shouldsleep = 1; /* We need to wait until we're _told_ to die */
371 else if (priv->psstate == PS_STATE_SLEEP)
372 shouldsleep = 1; /* Sleep mode. Nothing we can do till it wakes */
373 else if (priv->cmd_timed_out)
374 shouldsleep = 0; /* Command timed out. Recover */
375 else if (!priv->fw_ready)
376 shouldsleep = 1; /* Firmware not ready. We're waiting for it */
377 else if (priv->dnld_sent)
378 shouldsleep = 1; /* Something is en route to the device already */
379 else if (priv->tx_pending_len > 0)
380 shouldsleep = 0; /* We've a packet to send */
381 else if (priv->resp_len[priv->resp_idx])
382 shouldsleep = 0; /* We have a command response */
383 else if (priv->cur_cmd)
384 shouldsleep = 1; /* Can't send a command; one already running */
385 else if (!list_empty(&priv->cmdpendingq) &&
386 !(priv->wakeup_dev_required))
387 shouldsleep = 0; /* We have a command to send */
388 else if (kfifo_len(&priv->event_fifo))
389 shouldsleep = 0; /* We have an event to process */
390 else
391 shouldsleep = 1; /* No command */
393 if (shouldsleep) {
394 lbs_deb_thread("sleeping, connect_status %d, "
395 "psmode %d, psstate %d\n",
396 priv->connect_status,
397 priv->psmode, priv->psstate);
398 spin_unlock_irq(&priv->driver_lock);
399 schedule();
400 } else
401 spin_unlock_irq(&priv->driver_lock);
403 lbs_deb_thread("2: currenttxskb %p, dnld_send %d\n",
404 priv->currenttxskb, priv->dnld_sent);
406 set_current_state(TASK_RUNNING);
407 remove_wait_queue(&priv->waitq, &wait);
409 lbs_deb_thread("3: currenttxskb %p, dnld_sent %d\n",
410 priv->currenttxskb, priv->dnld_sent);
412 if (kthread_should_stop()) {
413 lbs_deb_thread("break from main thread\n");
414 break;
417 if (priv->surpriseremoved) {
418 lbs_deb_thread("adapter removed; waiting to die...\n");
419 continue;
422 lbs_deb_thread("4: currenttxskb %p, dnld_sent %d\n",
423 priv->currenttxskb, priv->dnld_sent);
425 /* Process any pending command response */
426 spin_lock_irq(&priv->driver_lock);
427 resp_idx = priv->resp_idx;
428 if (priv->resp_len[resp_idx]) {
429 spin_unlock_irq(&priv->driver_lock);
430 lbs_process_command_response(priv,
431 priv->resp_buf[resp_idx],
432 priv->resp_len[resp_idx]);
433 spin_lock_irq(&priv->driver_lock);
434 priv->resp_len[resp_idx] = 0;
436 spin_unlock_irq(&priv->driver_lock);
438 /* Process hardware events, e.g. card removed, link lost */
439 spin_lock_irq(&priv->driver_lock);
440 while (kfifo_len(&priv->event_fifo)) {
441 u32 event;
443 if (kfifo_out(&priv->event_fifo,
444 (unsigned char *) &event, sizeof(event)) !=
445 sizeof(event))
446 break;
447 spin_unlock_irq(&priv->driver_lock);
448 lbs_process_event(priv, event);
449 spin_lock_irq(&priv->driver_lock);
451 spin_unlock_irq(&priv->driver_lock);
453 if (priv->wakeup_dev_required) {
454 lbs_deb_thread("Waking up device...\n");
455 /* Wake up device */
456 if (priv->exit_deep_sleep(priv))
457 lbs_deb_thread("Wakeup device failed\n");
458 continue;
461 /* command timeout stuff */
462 if (priv->cmd_timed_out && priv->cur_cmd) {
463 struct cmd_ctrl_node *cmdnode = priv->cur_cmd;
465 lbs_pr_info("Timeout submitting command 0x%04x\n",
466 le16_to_cpu(cmdnode->cmdbuf->command));
467 lbs_complete_command(priv, cmdnode, -ETIMEDOUT);
468 if (priv->reset_card)
469 priv->reset_card(priv);
471 priv->cmd_timed_out = 0;
473 if (!priv->fw_ready)
474 continue;
476 /* Check if we need to confirm Sleep Request received previously */
477 if (priv->psstate == PS_STATE_PRE_SLEEP &&
478 !priv->dnld_sent && !priv->cur_cmd) {
479 if (priv->connect_status == LBS_CONNECTED) {
480 lbs_deb_thread("pre-sleep, currenttxskb %p, "
481 "dnld_sent %d, cur_cmd %p\n",
482 priv->currenttxskb, priv->dnld_sent,
483 priv->cur_cmd);
485 lbs_ps_confirm_sleep(priv);
486 } else {
487 /* workaround for firmware sending
488 * deauth/linkloss event immediately
489 * after sleep request; remove this
490 * after firmware fixes it
492 priv->psstate = PS_STATE_AWAKE;
493 lbs_pr_alert("ignore PS_SleepConfirm in "
494 "non-connected state\n");
498 /* The PS state is changed during processing of Sleep Request
499 * event above
501 if ((priv->psstate == PS_STATE_SLEEP) ||
502 (priv->psstate == PS_STATE_PRE_SLEEP))
503 continue;
505 if (priv->is_deep_sleep)
506 continue;
508 /* Execute the next command */
509 if (!priv->dnld_sent && !priv->cur_cmd)
510 lbs_execute_next_command(priv);
512 spin_lock_irq(&priv->driver_lock);
513 if (!priv->dnld_sent && priv->tx_pending_len > 0) {
514 int ret = priv->hw_host_to_card(priv, MVMS_DAT,
515 priv->tx_pending_buf,
516 priv->tx_pending_len);
517 if (ret) {
518 lbs_deb_tx("host_to_card failed %d\n", ret);
519 priv->dnld_sent = DNLD_RES_RECEIVED;
521 priv->tx_pending_len = 0;
522 if (!priv->currenttxskb) {
523 /* We can wake the queues immediately if we aren't
524 waiting for TX feedback */
525 if (priv->connect_status == LBS_CONNECTED)
526 netif_wake_queue(priv->dev);
527 if (priv->mesh_dev &&
528 lbs_mesh_connected(priv))
529 netif_wake_queue(priv->mesh_dev);
532 spin_unlock_irq(&priv->driver_lock);
535 del_timer(&priv->command_timer);
536 del_timer(&priv->auto_deepsleep_timer);
538 lbs_deb_leave(LBS_DEB_THREAD);
539 return 0;
542 int lbs_suspend(struct lbs_private *priv)
544 int ret;
546 lbs_deb_enter(LBS_DEB_FW);
548 if (priv->is_deep_sleep) {
549 ret = lbs_set_deep_sleep(priv, 0);
550 if (ret) {
551 lbs_pr_err("deep sleep cancellation failed: %d\n", ret);
552 return ret;
554 priv->deep_sleep_required = 1;
557 ret = lbs_set_host_sleep(priv, 1);
559 netif_device_detach(priv->dev);
560 if (priv->mesh_dev)
561 netif_device_detach(priv->mesh_dev);
563 lbs_deb_leave_args(LBS_DEB_FW, "ret %d", ret);
564 return ret;
566 EXPORT_SYMBOL_GPL(lbs_suspend);
568 int lbs_resume(struct lbs_private *priv)
570 int ret;
572 lbs_deb_enter(LBS_DEB_FW);
574 ret = lbs_set_host_sleep(priv, 0);
576 netif_device_attach(priv->dev);
577 if (priv->mesh_dev)
578 netif_device_attach(priv->mesh_dev);
580 if (priv->deep_sleep_required) {
581 priv->deep_sleep_required = 0;
582 ret = lbs_set_deep_sleep(priv, 1);
583 if (ret)
584 lbs_pr_err("deep sleep activation failed: %d\n", ret);
587 lbs_deb_leave_args(LBS_DEB_FW, "ret %d", ret);
588 return ret;
590 EXPORT_SYMBOL_GPL(lbs_resume);
593 * @brief This function gets the HW spec from the firmware and sets
594 * some basic parameters.
596 * @param priv A pointer to struct lbs_private structure
597 * @return 0 or -1
599 static int lbs_setup_firmware(struct lbs_private *priv)
601 int ret = -1;
602 s16 curlevel = 0, minlevel = 0, maxlevel = 0;
604 lbs_deb_enter(LBS_DEB_FW);
606 /* Read MAC address from firmware */
607 memset(priv->current_addr, 0xff, ETH_ALEN);
608 ret = lbs_update_hw_spec(priv);
609 if (ret)
610 goto done;
612 /* Read power levels if available */
613 ret = lbs_get_tx_power(priv, &curlevel, &minlevel, &maxlevel);
614 if (ret == 0) {
615 priv->txpower_cur = curlevel;
616 priv->txpower_min = minlevel;
617 priv->txpower_max = maxlevel;
620 /* Send cmd to FW to enable 11D function */
621 ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_11D_ENABLE, 1);
623 lbs_set_mac_control(priv);
624 done:
625 lbs_deb_leave_args(LBS_DEB_FW, "ret %d", ret);
626 return ret;
630 * This function handles the timeout of command sending.
631 * It will re-send the same command again.
633 static void lbs_cmd_timeout_handler(unsigned long data)
635 struct lbs_private *priv = (struct lbs_private *)data;
636 unsigned long flags;
638 lbs_deb_enter(LBS_DEB_CMD);
639 spin_lock_irqsave(&priv->driver_lock, flags);
641 if (!priv->cur_cmd)
642 goto out;
644 lbs_pr_info("command 0x%04x timed out\n",
645 le16_to_cpu(priv->cur_cmd->cmdbuf->command));
647 priv->cmd_timed_out = 1;
648 wake_up_interruptible(&priv->waitq);
649 out:
650 spin_unlock_irqrestore(&priv->driver_lock, flags);
651 lbs_deb_leave(LBS_DEB_CMD);
655 * This function put the device back to deep sleep mode when timer expires
656 * and no activity (command, event, data etc.) is detected.
658 static void auto_deepsleep_timer_fn(unsigned long data)
660 struct lbs_private *priv = (struct lbs_private *)data;
662 lbs_deb_enter(LBS_DEB_CMD);
664 if (priv->is_activity_detected) {
665 priv->is_activity_detected = 0;
666 } else {
667 if (priv->is_auto_deep_sleep_enabled &&
668 (!priv->wakeup_dev_required) &&
669 (priv->connect_status != LBS_CONNECTED)) {
670 struct cmd_header cmd;
672 lbs_deb_main("Entering auto deep sleep mode...\n");
673 memset(&cmd, 0, sizeof(cmd));
674 cmd.size = cpu_to_le16(sizeof(cmd));
675 lbs_cmd_async(priv, CMD_802_11_DEEP_SLEEP, &cmd,
676 sizeof(cmd));
679 mod_timer(&priv->auto_deepsleep_timer , jiffies +
680 (priv->auto_deep_sleep_timeout * HZ)/1000);
681 lbs_deb_leave(LBS_DEB_CMD);
684 int lbs_enter_auto_deep_sleep(struct lbs_private *priv)
686 lbs_deb_enter(LBS_DEB_SDIO);
688 priv->is_auto_deep_sleep_enabled = 1;
689 if (priv->is_deep_sleep)
690 priv->wakeup_dev_required = 1;
691 mod_timer(&priv->auto_deepsleep_timer ,
692 jiffies + (priv->auto_deep_sleep_timeout * HZ)/1000);
694 lbs_deb_leave(LBS_DEB_SDIO);
695 return 0;
698 int lbs_exit_auto_deep_sleep(struct lbs_private *priv)
700 lbs_deb_enter(LBS_DEB_SDIO);
702 priv->is_auto_deep_sleep_enabled = 0;
703 priv->auto_deep_sleep_timeout = 0;
704 del_timer(&priv->auto_deepsleep_timer);
706 lbs_deb_leave(LBS_DEB_SDIO);
707 return 0;
710 static int lbs_init_adapter(struct lbs_private *priv)
712 int ret;
714 lbs_deb_enter(LBS_DEB_MAIN);
716 memset(priv->current_addr, 0xff, ETH_ALEN);
718 priv->connect_status = LBS_DISCONNECTED;
719 priv->channel = DEFAULT_AD_HOC_CHANNEL;
720 priv->mac_control = CMD_ACT_MAC_RX_ON | CMD_ACT_MAC_TX_ON;
721 priv->radio_on = 1;
722 priv->psmode = LBS802_11POWERMODECAM;
723 priv->psstate = PS_STATE_FULL_POWER;
724 priv->is_deep_sleep = 0;
725 priv->is_auto_deep_sleep_enabled = 0;
726 priv->deep_sleep_required = 0;
727 priv->wakeup_dev_required = 0;
728 init_waitqueue_head(&priv->ds_awake_q);
729 init_waitqueue_head(&priv->scan_q);
730 priv->authtype_auto = 1;
731 priv->is_host_sleep_configured = 0;
732 priv->is_host_sleep_activated = 0;
733 init_waitqueue_head(&priv->host_sleep_q);
734 mutex_init(&priv->lock);
736 setup_timer(&priv->command_timer, lbs_cmd_timeout_handler,
737 (unsigned long)priv);
738 setup_timer(&priv->auto_deepsleep_timer, auto_deepsleep_timer_fn,
739 (unsigned long)priv);
741 INIT_LIST_HEAD(&priv->cmdfreeq);
742 INIT_LIST_HEAD(&priv->cmdpendingq);
744 spin_lock_init(&priv->driver_lock);
746 /* Allocate the command buffers */
747 if (lbs_allocate_cmd_buffer(priv)) {
748 lbs_pr_err("Out of memory allocating command buffers\n");
749 ret = -ENOMEM;
750 goto out;
752 priv->resp_idx = 0;
753 priv->resp_len[0] = priv->resp_len[1] = 0;
755 /* Create the event FIFO */
756 ret = kfifo_alloc(&priv->event_fifo, sizeof(u32) * 16, GFP_KERNEL);
757 if (ret) {
758 lbs_pr_err("Out of memory allocating event FIFO buffer\n");
759 goto out;
762 out:
763 lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
765 return ret;
768 static void lbs_free_adapter(struct lbs_private *priv)
770 lbs_deb_enter(LBS_DEB_MAIN);
772 lbs_free_cmd_buffer(priv);
773 kfifo_free(&priv->event_fifo);
774 del_timer(&priv->command_timer);
775 del_timer(&priv->auto_deepsleep_timer);
777 lbs_deb_leave(LBS_DEB_MAIN);
780 static const struct net_device_ops lbs_netdev_ops = {
781 .ndo_open = lbs_dev_open,
782 .ndo_stop = lbs_eth_stop,
783 .ndo_start_xmit = lbs_hard_start_xmit,
784 .ndo_set_mac_address = lbs_set_mac_address,
785 .ndo_tx_timeout = lbs_tx_timeout,
786 .ndo_set_multicast_list = lbs_set_multicast_list,
787 .ndo_change_mtu = eth_change_mtu,
788 .ndo_validate_addr = eth_validate_addr,
792 * @brief This function adds the card. it will probe the
793 * card, allocate the lbs_priv and initialize the device.
795 * @param card A pointer to card
796 * @return A pointer to struct lbs_private structure
798 struct lbs_private *lbs_add_card(void *card, struct device *dmdev)
800 struct net_device *dev;
801 struct wireless_dev *wdev;
802 struct lbs_private *priv = NULL;
804 lbs_deb_enter(LBS_DEB_MAIN);
806 /* Allocate an Ethernet device and register it */
807 wdev = lbs_cfg_alloc(dmdev);
808 if (IS_ERR(wdev)) {
809 lbs_pr_err("cfg80211 init failed\n");
810 goto done;
813 wdev->iftype = NL80211_IFTYPE_STATION;
814 priv = wdev_priv(wdev);
815 priv->wdev = wdev;
817 if (lbs_init_adapter(priv)) {
818 lbs_pr_err("failed to initialize adapter structure.\n");
819 goto err_wdev;
822 dev = alloc_netdev(0, "wlan%d", ether_setup);
823 if (!dev) {
824 dev_err(dmdev, "no memory for network device instance\n");
825 goto err_adapter;
828 dev->ieee80211_ptr = wdev;
829 dev->ml_priv = priv;
830 SET_NETDEV_DEV(dev, dmdev);
831 wdev->netdev = dev;
832 priv->dev = dev;
834 dev->netdev_ops = &lbs_netdev_ops;
835 dev->watchdog_timeo = 5 * HZ;
836 dev->ethtool_ops = &lbs_ethtool_ops;
837 dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
839 priv->card = card;
841 strcpy(dev->name, "wlan%d");
843 lbs_deb_thread("Starting main thread...\n");
844 init_waitqueue_head(&priv->waitq);
845 priv->main_thread = kthread_run(lbs_thread, dev, "lbs_main");
846 if (IS_ERR(priv->main_thread)) {
847 lbs_deb_thread("Error creating main thread.\n");
848 goto err_ndev;
851 priv->work_thread = create_singlethread_workqueue("lbs_worker");
852 INIT_WORK(&priv->mcast_work, lbs_set_mcast_worker);
854 priv->wol_criteria = 0xffffffff;
855 priv->wol_gpio = 0xff;
856 priv->wol_gap = 20;
858 goto done;
860 err_ndev:
861 free_netdev(dev);
863 err_adapter:
864 lbs_free_adapter(priv);
866 err_wdev:
867 lbs_cfg_free(priv);
869 priv = NULL;
871 done:
872 lbs_deb_leave_args(LBS_DEB_MAIN, "priv %p", priv);
873 return priv;
875 EXPORT_SYMBOL_GPL(lbs_add_card);
878 void lbs_remove_card(struct lbs_private *priv)
880 struct net_device *dev = priv->dev;
882 lbs_deb_enter(LBS_DEB_MAIN);
884 lbs_remove_mesh(priv);
885 lbs_scan_deinit(priv);
887 dev = priv->dev;
889 cancel_work_sync(&priv->mcast_work);
891 /* worker thread destruction blocks on the in-flight command which
892 * should have been cleared already in lbs_stop_card().
894 lbs_deb_main("destroying worker thread\n");
895 destroy_workqueue(priv->work_thread);
896 lbs_deb_main("done destroying worker thread\n");
898 if (priv->psmode == LBS802_11POWERMODEMAX_PSP) {
899 priv->psmode = LBS802_11POWERMODECAM;
900 lbs_set_ps_mode(priv, PS_MODE_ACTION_EXIT_PS, true);
903 if (priv->is_deep_sleep) {
904 priv->is_deep_sleep = 0;
905 wake_up_interruptible(&priv->ds_awake_q);
908 priv->is_host_sleep_configured = 0;
909 priv->is_host_sleep_activated = 0;
910 wake_up_interruptible(&priv->host_sleep_q);
912 /* Stop the thread servicing the interrupts */
913 priv->surpriseremoved = 1;
914 kthread_stop(priv->main_thread);
916 lbs_free_adapter(priv);
917 lbs_cfg_free(priv);
918 free_netdev(dev);
920 lbs_deb_leave(LBS_DEB_MAIN);
922 EXPORT_SYMBOL_GPL(lbs_remove_card);
925 int lbs_rtap_supported(struct lbs_private *priv)
927 if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V5)
928 return 1;
930 /* newer firmware use a capability mask */
931 return ((MRVL_FW_MAJOR_REV(priv->fwrelease) >= MRVL_FW_V10) &&
932 (priv->fwcapinfo & MESH_CAPINFO_ENABLE_MASK));
936 int lbs_start_card(struct lbs_private *priv)
938 struct net_device *dev = priv->dev;
939 int ret = -1;
941 lbs_deb_enter(LBS_DEB_MAIN);
943 /* poke the firmware */
944 ret = lbs_setup_firmware(priv);
945 if (ret)
946 goto done;
948 if (lbs_cfg_register(priv)) {
949 lbs_pr_err("cannot register device\n");
950 goto done;
953 lbs_update_channel(priv);
955 lbs_init_mesh(priv);
957 lbs_debugfs_init_one(priv, dev);
959 lbs_pr_info("%s: Marvell WLAN 802.11 adapter\n", dev->name);
961 ret = 0;
963 done:
964 lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
965 return ret;
967 EXPORT_SYMBOL_GPL(lbs_start_card);
970 void lbs_stop_card(struct lbs_private *priv)
972 struct net_device *dev;
973 struct cmd_ctrl_node *cmdnode;
974 unsigned long flags;
976 lbs_deb_enter(LBS_DEB_MAIN);
978 if (!priv)
979 goto out;
980 dev = priv->dev;
982 netif_stop_queue(dev);
983 netif_carrier_off(dev);
985 lbs_debugfs_remove_one(priv);
986 lbs_deinit_mesh(priv);
988 /* Delete the timeout of the currently processing command */
989 del_timer_sync(&priv->command_timer);
990 del_timer_sync(&priv->auto_deepsleep_timer);
992 /* Flush pending command nodes */
993 spin_lock_irqsave(&priv->driver_lock, flags);
994 lbs_deb_main("clearing pending commands\n");
995 list_for_each_entry(cmdnode, &priv->cmdpendingq, list) {
996 cmdnode->result = -ENOENT;
997 cmdnode->cmdwaitqwoken = 1;
998 wake_up_interruptible(&cmdnode->cmdwait_q);
1001 /* Flush the command the card is currently processing */
1002 if (priv->cur_cmd) {
1003 lbs_deb_main("clearing current command\n");
1004 priv->cur_cmd->result = -ENOENT;
1005 priv->cur_cmd->cmdwaitqwoken = 1;
1006 wake_up_interruptible(&priv->cur_cmd->cmdwait_q);
1008 lbs_deb_main("done clearing commands\n");
1009 spin_unlock_irqrestore(&priv->driver_lock, flags);
1011 unregister_netdev(dev);
1013 out:
1014 lbs_deb_leave(LBS_DEB_MAIN);
1016 EXPORT_SYMBOL_GPL(lbs_stop_card);
1019 void lbs_queue_event(struct lbs_private *priv, u32 event)
1021 unsigned long flags;
1023 lbs_deb_enter(LBS_DEB_THREAD);
1024 spin_lock_irqsave(&priv->driver_lock, flags);
1026 if (priv->psstate == PS_STATE_SLEEP)
1027 priv->psstate = PS_STATE_AWAKE;
1029 kfifo_in(&priv->event_fifo, (unsigned char *) &event, sizeof(u32));
1031 wake_up_interruptible(&priv->waitq);
1033 spin_unlock_irqrestore(&priv->driver_lock, flags);
1034 lbs_deb_leave(LBS_DEB_THREAD);
1036 EXPORT_SYMBOL_GPL(lbs_queue_event);
1038 void lbs_notify_command_response(struct lbs_private *priv, u8 resp_idx)
1040 lbs_deb_enter(LBS_DEB_THREAD);
1042 if (priv->psstate == PS_STATE_SLEEP)
1043 priv->psstate = PS_STATE_AWAKE;
1045 /* Swap buffers by flipping the response index */
1046 BUG_ON(resp_idx > 1);
1047 priv->resp_idx = resp_idx;
1049 wake_up_interruptible(&priv->waitq);
1051 lbs_deb_leave(LBS_DEB_THREAD);
1053 EXPORT_SYMBOL_GPL(lbs_notify_command_response);
1056 * @brief Retrieves two-stage firmware
1058 * @param dev A pointer to device structure
1059 * @param user_helper User-defined helper firmware file
1060 * @param user_mainfw User-defined main firmware file
1061 * @param card_model Bus-specific card model ID used to filter firmware table
1062 * elements
1063 * @param fw_table Table of firmware file names and device model numbers
1064 * terminated by an entry with a NULL helper name
1065 * @param helper On success, the helper firmware; caller must free
1066 * @param mainfw On success, the main firmware; caller must free
1068 * @return 0 on success, non-zero on failure
1070 int lbs_get_firmware(struct device *dev, const char *user_helper,
1071 const char *user_mainfw, u32 card_model,
1072 const struct lbs_fw_table *fw_table,
1073 const struct firmware **helper,
1074 const struct firmware **mainfw)
1076 const struct lbs_fw_table *iter;
1077 int ret;
1079 BUG_ON(helper == NULL);
1080 BUG_ON(mainfw == NULL);
1082 /* Try user-specified firmware first */
1083 if (user_helper) {
1084 ret = request_firmware(helper, user_helper, dev);
1085 if (ret) {
1086 lbs_pr_err("couldn't find helper firmware %s",
1087 user_helper);
1088 goto fail;
1091 if (user_mainfw) {
1092 ret = request_firmware(mainfw, user_mainfw, dev);
1093 if (ret) {
1094 lbs_pr_err("couldn't find main firmware %s",
1095 user_mainfw);
1096 goto fail;
1100 if (*helper && *mainfw)
1101 return 0;
1103 /* Otherwise search for firmware to use. If neither the helper or
1104 * the main firmware were specified by the user, then we need to
1105 * make sure that found helper & main are from the same entry in
1106 * fw_table.
1108 iter = fw_table;
1109 while (iter && iter->helper) {
1110 if (iter->model != card_model)
1111 goto next;
1113 if (*helper == NULL) {
1114 ret = request_firmware(helper, iter->helper, dev);
1115 if (ret)
1116 goto next;
1118 /* If the device has one-stage firmware (ie cf8305) and
1119 * we've got it then we don't need to bother with the
1120 * main firmware.
1122 if (iter->fwname == NULL)
1123 return 0;
1126 if (*mainfw == NULL) {
1127 ret = request_firmware(mainfw, iter->fwname, dev);
1128 if (ret && !user_helper) {
1129 /* Clear the helper if it wasn't user-specified
1130 * and the main firmware load failed, to ensure
1131 * we don't have mismatched firmware pairs.
1133 release_firmware(*helper);
1134 *helper = NULL;
1138 if (*helper && *mainfw)
1139 return 0;
1141 next:
1142 iter++;
1145 fail:
1146 /* Failed */
1147 if (*helper) {
1148 release_firmware(*helper);
1149 *helper = NULL;
1151 if (*mainfw) {
1152 release_firmware(*mainfw);
1153 *mainfw = NULL;
1156 return -ENOENT;
1158 EXPORT_SYMBOL_GPL(lbs_get_firmware);
1160 static int __init lbs_init_module(void)
1162 lbs_deb_enter(LBS_DEB_MAIN);
1163 memset(&confirm_sleep, 0, sizeof(confirm_sleep));
1164 confirm_sleep.hdr.command = cpu_to_le16(CMD_802_11_PS_MODE);
1165 confirm_sleep.hdr.size = cpu_to_le16(sizeof(confirm_sleep));
1166 confirm_sleep.action = cpu_to_le16(PS_MODE_ACTION_SLEEP_CONFIRMED);
1167 lbs_debugfs_init();
1168 lbs_deb_leave(LBS_DEB_MAIN);
1169 return 0;
1172 static void __exit lbs_exit_module(void)
1174 lbs_deb_enter(LBS_DEB_MAIN);
1175 lbs_debugfs_remove();
1176 lbs_deb_leave(LBS_DEB_MAIN);
1179 module_init(lbs_init_module);
1180 module_exit(lbs_exit_module);
1182 MODULE_DESCRIPTION("Libertas WLAN Driver Library");
1183 MODULE_AUTHOR("Marvell International Ltd.");
1184 MODULE_LICENSE("GPL");