[PATCH] fs.h: ifdef security fields
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / scsi / lpfc / lpfc_sli.c
blob70f4d5a1348e9f6aa39f0755d8b979f5a66a90da
1 /*******************************************************************
2 * This file is part of the Emulex Linux Device Driver for *
3 * Fibre Channel Host Bus Adapters. *
4 * Copyright (C) 2004-2006 Emulex. All rights reserved. *
5 * EMULEX and SLI are trademarks of Emulex. *
6 * www.emulex.com *
7 * Portions Copyright (C) 2004-2005 Christoph Hellwig *
8 * *
9 * This program is free software; you can redistribute it and/or *
10 * modify it under the terms of version 2 of the GNU General *
11 * Public License as published by the Free Software Foundation. *
12 * This program is distributed in the hope that it will be useful. *
13 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
14 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
15 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
16 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
17 * TO BE LEGALLY INVALID. See the GNU General Public License for *
18 * more details, a copy of which can be found in the file COPYING *
19 * included with this package. *
20 *******************************************************************/
22 #include <linux/blkdev.h>
23 #include <linux/pci.h>
24 #include <linux/interrupt.h>
25 #include <linux/delay.h>
27 #include <scsi/scsi.h>
28 #include <scsi/scsi_cmnd.h>
29 #include <scsi/scsi_device.h>
30 #include <scsi/scsi_host.h>
31 #include <scsi/scsi_transport_fc.h>
33 #include "lpfc_hw.h"
34 #include "lpfc_sli.h"
35 #include "lpfc_disc.h"
36 #include "lpfc_scsi.h"
37 #include "lpfc.h"
38 #include "lpfc_crtn.h"
39 #include "lpfc_logmsg.h"
40 #include "lpfc_compat.h"
43 * Define macro to log: Mailbox command x%x cannot issue Data
44 * This allows multiple uses of lpfc_msgBlk0311
45 * w/o perturbing log msg utility.
47 #define LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag) \
48 lpfc_printf_log(phba, \
49 KERN_INFO, \
50 LOG_MBOX | LOG_SLI, \
51 "%d:0311 Mailbox command x%x cannot issue " \
52 "Data: x%x x%x x%x\n", \
53 phba->brd_no, \
54 mb->mbxCommand, \
55 phba->hba_state, \
56 psli->sli_flag, \
57 flag);
60 /* There are only four IOCB completion types. */
61 typedef enum _lpfc_iocb_type {
62 LPFC_UNKNOWN_IOCB,
63 LPFC_UNSOL_IOCB,
64 LPFC_SOL_IOCB,
65 LPFC_ABORT_IOCB
66 } lpfc_iocb_type;
68 struct lpfc_iocbq *
69 lpfc_sli_get_iocbq(struct lpfc_hba * phba)
71 struct list_head *lpfc_iocb_list = &phba->lpfc_iocb_list;
72 struct lpfc_iocbq * iocbq = NULL;
74 list_remove_head(lpfc_iocb_list, iocbq, struct lpfc_iocbq, list);
75 return iocbq;
78 void
79 lpfc_sli_release_iocbq(struct lpfc_hba * phba, struct lpfc_iocbq * iocbq)
81 size_t start_clean = (size_t)(&((struct lpfc_iocbq *)NULL)->iocb);
84 * Clean all volatile data fields, preserve iotag and node struct.
86 memset((char*)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean);
87 list_add_tail(&iocbq->list, &phba->lpfc_iocb_list);
91 * Translate the iocb command to an iocb command type used to decide the final
92 * disposition of each completed IOCB.
94 static lpfc_iocb_type
95 lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd)
97 lpfc_iocb_type type = LPFC_UNKNOWN_IOCB;
99 if (iocb_cmnd > CMD_MAX_IOCB_CMD)
100 return 0;
102 switch (iocb_cmnd) {
103 case CMD_XMIT_SEQUENCE_CR:
104 case CMD_XMIT_SEQUENCE_CX:
105 case CMD_XMIT_BCAST_CN:
106 case CMD_XMIT_BCAST_CX:
107 case CMD_ELS_REQUEST_CR:
108 case CMD_ELS_REQUEST_CX:
109 case CMD_CREATE_XRI_CR:
110 case CMD_CREATE_XRI_CX:
111 case CMD_GET_RPI_CN:
112 case CMD_XMIT_ELS_RSP_CX:
113 case CMD_GET_RPI_CR:
114 case CMD_FCP_IWRITE_CR:
115 case CMD_FCP_IWRITE_CX:
116 case CMD_FCP_IREAD_CR:
117 case CMD_FCP_IREAD_CX:
118 case CMD_FCP_ICMND_CR:
119 case CMD_FCP_ICMND_CX:
120 case CMD_ADAPTER_MSG:
121 case CMD_ADAPTER_DUMP:
122 case CMD_XMIT_SEQUENCE64_CR:
123 case CMD_XMIT_SEQUENCE64_CX:
124 case CMD_XMIT_BCAST64_CN:
125 case CMD_XMIT_BCAST64_CX:
126 case CMD_ELS_REQUEST64_CR:
127 case CMD_ELS_REQUEST64_CX:
128 case CMD_FCP_IWRITE64_CR:
129 case CMD_FCP_IWRITE64_CX:
130 case CMD_FCP_IREAD64_CR:
131 case CMD_FCP_IREAD64_CX:
132 case CMD_FCP_ICMND64_CR:
133 case CMD_FCP_ICMND64_CX:
134 case CMD_GEN_REQUEST64_CR:
135 case CMD_GEN_REQUEST64_CX:
136 case CMD_XMIT_ELS_RSP64_CX:
137 type = LPFC_SOL_IOCB;
138 break;
139 case CMD_ABORT_XRI_CN:
140 case CMD_ABORT_XRI_CX:
141 case CMD_CLOSE_XRI_CN:
142 case CMD_CLOSE_XRI_CX:
143 case CMD_XRI_ABORTED_CX:
144 case CMD_ABORT_MXRI64_CN:
145 type = LPFC_ABORT_IOCB;
146 break;
147 case CMD_RCV_SEQUENCE_CX:
148 case CMD_RCV_ELS_REQ_CX:
149 case CMD_RCV_SEQUENCE64_CX:
150 case CMD_RCV_ELS_REQ64_CX:
151 type = LPFC_UNSOL_IOCB;
152 break;
153 default:
154 type = LPFC_UNKNOWN_IOCB;
155 break;
158 return type;
161 static int
162 lpfc_sli_ring_map(struct lpfc_hba * phba, LPFC_MBOXQ_t *pmb)
164 struct lpfc_sli *psli = &phba->sli;
165 MAILBOX_t *pmbox = &pmb->mb;
166 int i, rc;
168 for (i = 0; i < psli->num_rings; i++) {
169 phba->hba_state = LPFC_INIT_MBX_CMDS;
170 lpfc_config_ring(phba, i, pmb);
171 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
172 if (rc != MBX_SUCCESS) {
173 lpfc_printf_log(phba,
174 KERN_ERR,
175 LOG_INIT,
176 "%d:0446 Adapter failed to init, "
177 "mbxCmd x%x CFG_RING, mbxStatus x%x, "
178 "ring %d\n",
179 phba->brd_no,
180 pmbox->mbxCommand,
181 pmbox->mbxStatus,
183 phba->hba_state = LPFC_HBA_ERROR;
184 return -ENXIO;
187 return 0;
190 static int
191 lpfc_sli_ringtxcmpl_put(struct lpfc_hba * phba,
192 struct lpfc_sli_ring * pring, struct lpfc_iocbq * piocb)
194 list_add_tail(&piocb->list, &pring->txcmplq);
195 pring->txcmplq_cnt++;
196 if (unlikely(pring->ringno == LPFC_ELS_RING))
197 mod_timer(&phba->els_tmofunc,
198 jiffies + HZ * (phba->fc_ratov << 1));
200 return (0);
203 static struct lpfc_iocbq *
204 lpfc_sli_ringtx_get(struct lpfc_hba * phba, struct lpfc_sli_ring * pring)
206 struct list_head *dlp;
207 struct lpfc_iocbq *cmd_iocb;
209 dlp = &pring->txq;
210 cmd_iocb = NULL;
211 list_remove_head((&pring->txq), cmd_iocb,
212 struct lpfc_iocbq,
213 list);
214 if (cmd_iocb) {
215 /* If the first ptr is not equal to the list header,
216 * deque the IOCBQ_t and return it.
218 pring->txq_cnt--;
220 return (cmd_iocb);
223 static IOCB_t *
224 lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
226 struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[pring->ringno];
227 uint32_t max_cmd_idx = pring->numCiocb;
228 IOCB_t *iocb = NULL;
230 if ((pring->next_cmdidx == pring->cmdidx) &&
231 (++pring->next_cmdidx >= max_cmd_idx))
232 pring->next_cmdidx = 0;
234 if (unlikely(pring->local_getidx == pring->next_cmdidx)) {
236 pring->local_getidx = le32_to_cpu(pgp->cmdGetInx);
238 if (unlikely(pring->local_getidx >= max_cmd_idx)) {
239 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
240 "%d:0315 Ring %d issue: portCmdGet %d "
241 "is bigger then cmd ring %d\n",
242 phba->brd_no, pring->ringno,
243 pring->local_getidx, max_cmd_idx);
245 phba->hba_state = LPFC_HBA_ERROR;
247 * All error attention handlers are posted to
248 * worker thread
250 phba->work_ha |= HA_ERATT;
251 phba->work_hs = HS_FFER3;
252 if (phba->work_wait)
253 wake_up(phba->work_wait);
255 return NULL;
258 if (pring->local_getidx == pring->next_cmdidx)
259 return NULL;
262 iocb = IOCB_ENTRY(pring->cmdringaddr, pring->cmdidx);
264 return iocb;
267 uint16_t
268 lpfc_sli_next_iotag(struct lpfc_hba * phba, struct lpfc_iocbq * iocbq)
270 struct lpfc_iocbq ** new_arr;
271 struct lpfc_iocbq ** old_arr;
272 size_t new_len;
273 struct lpfc_sli *psli = &phba->sli;
274 uint16_t iotag;
276 spin_lock_irq(phba->host->host_lock);
277 iotag = psli->last_iotag;
278 if(++iotag < psli->iocbq_lookup_len) {
279 psli->last_iotag = iotag;
280 psli->iocbq_lookup[iotag] = iocbq;
281 spin_unlock_irq(phba->host->host_lock);
282 iocbq->iotag = iotag;
283 return iotag;
285 else if (psli->iocbq_lookup_len < (0xffff
286 - LPFC_IOCBQ_LOOKUP_INCREMENT)) {
287 new_len = psli->iocbq_lookup_len + LPFC_IOCBQ_LOOKUP_INCREMENT;
288 spin_unlock_irq(phba->host->host_lock);
289 new_arr = kmalloc(new_len * sizeof (struct lpfc_iocbq *),
290 GFP_KERNEL);
291 if (new_arr) {
292 memset((char *)new_arr, 0,
293 new_len * sizeof (struct lpfc_iocbq *));
294 spin_lock_irq(phba->host->host_lock);
295 old_arr = psli->iocbq_lookup;
296 if (new_len <= psli->iocbq_lookup_len) {
297 /* highly unprobable case */
298 kfree(new_arr);
299 iotag = psli->last_iotag;
300 if(++iotag < psli->iocbq_lookup_len) {
301 psli->last_iotag = iotag;
302 psli->iocbq_lookup[iotag] = iocbq;
303 spin_unlock_irq(phba->host->host_lock);
304 iocbq->iotag = iotag;
305 return iotag;
307 spin_unlock_irq(phba->host->host_lock);
308 return 0;
310 if (psli->iocbq_lookup)
311 memcpy(new_arr, old_arr,
312 ((psli->last_iotag + 1) *
313 sizeof (struct lpfc_iocbq *)));
314 psli->iocbq_lookup = new_arr;
315 psli->iocbq_lookup_len = new_len;
316 psli->last_iotag = iotag;
317 psli->iocbq_lookup[iotag] = iocbq;
318 spin_unlock_irq(phba->host->host_lock);
319 iocbq->iotag = iotag;
320 kfree(old_arr);
321 return iotag;
323 } else
324 spin_unlock_irq(phba->host->host_lock);
326 lpfc_printf_log(phba, KERN_ERR,LOG_SLI,
327 "%d:0318 Failed to allocate IOTAG.last IOTAG is %d\n",
328 phba->brd_no, psli->last_iotag);
330 return 0;
333 static void
334 lpfc_sli_submit_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
335 IOCB_t *iocb, struct lpfc_iocbq *nextiocb)
338 * Set up an iotag
340 nextiocb->iocb.ulpIoTag = (nextiocb->iocb_cmpl) ? nextiocb->iotag : 0;
343 * Issue iocb command to adapter
345 lpfc_sli_pcimem_bcopy(&nextiocb->iocb, iocb, sizeof (IOCB_t));
346 wmb();
347 pring->stats.iocb_cmd++;
350 * If there is no completion routine to call, we can release the
351 * IOCB buffer back right now. For IOCBs, like QUE_RING_BUF,
352 * that have no rsp ring completion, iocb_cmpl MUST be NULL.
354 if (nextiocb->iocb_cmpl)
355 lpfc_sli_ringtxcmpl_put(phba, pring, nextiocb);
356 else
357 lpfc_sli_release_iocbq(phba, nextiocb);
360 * Let the HBA know what IOCB slot will be the next one the
361 * driver will put a command into.
363 pring->cmdidx = pring->next_cmdidx;
364 writel(pring->cmdidx, phba->MBslimaddr
365 + (SLIMOFF + (pring->ringno * 2)) * 4);
368 static void
369 lpfc_sli_update_full_ring(struct lpfc_hba * phba,
370 struct lpfc_sli_ring *pring)
372 int ringno = pring->ringno;
374 pring->flag |= LPFC_CALL_RING_AVAILABLE;
376 wmb();
379 * Set ring 'ringno' to SET R0CE_REQ in Chip Att register.
380 * The HBA will tell us when an IOCB entry is available.
382 writel((CA_R0ATT|CA_R0CE_REQ) << (ringno*4), phba->CAregaddr);
383 readl(phba->CAregaddr); /* flush */
385 pring->stats.iocb_cmd_full++;
388 static void
389 lpfc_sli_update_ring(struct lpfc_hba * phba,
390 struct lpfc_sli_ring *pring)
392 int ringno = pring->ringno;
395 * Tell the HBA that there is work to do in this ring.
397 wmb();
398 writel(CA_R0ATT << (ringno * 4), phba->CAregaddr);
399 readl(phba->CAregaddr); /* flush */
402 static void
403 lpfc_sli_resume_iocb(struct lpfc_hba * phba, struct lpfc_sli_ring * pring)
405 IOCB_t *iocb;
406 struct lpfc_iocbq *nextiocb;
409 * Check to see if:
410 * (a) there is anything on the txq to send
411 * (b) link is up
412 * (c) link attention events can be processed (fcp ring only)
413 * (d) IOCB processing is not blocked by the outstanding mbox command.
415 if (pring->txq_cnt &&
416 (phba->hba_state > LPFC_LINK_DOWN) &&
417 (pring->ringno != phba->sli.fcp_ring ||
418 phba->sli.sli_flag & LPFC_PROCESS_LA) &&
419 !(pring->flag & LPFC_STOP_IOCB_MBX)) {
421 while ((iocb = lpfc_sli_next_iocb_slot(phba, pring)) &&
422 (nextiocb = lpfc_sli_ringtx_get(phba, pring)))
423 lpfc_sli_submit_iocb(phba, pring, iocb, nextiocb);
425 if (iocb)
426 lpfc_sli_update_ring(phba, pring);
427 else
428 lpfc_sli_update_full_ring(phba, pring);
431 return;
434 /* lpfc_sli_turn_on_ring is only called by lpfc_sli_handle_mb_event below */
435 static void
436 lpfc_sli_turn_on_ring(struct lpfc_hba * phba, int ringno)
438 struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[ringno];
440 /* If the ring is active, flag it */
441 if (phba->sli.ring[ringno].cmdringaddr) {
442 if (phba->sli.ring[ringno].flag & LPFC_STOP_IOCB_MBX) {
443 phba->sli.ring[ringno].flag &= ~LPFC_STOP_IOCB_MBX;
445 * Force update of the local copy of cmdGetInx
447 phba->sli.ring[ringno].local_getidx
448 = le32_to_cpu(pgp->cmdGetInx);
449 spin_lock_irq(phba->host->host_lock);
450 lpfc_sli_resume_iocb(phba, &phba->sli.ring[ringno]);
451 spin_unlock_irq(phba->host->host_lock);
456 static int
457 lpfc_sli_chk_mbx_command(uint8_t mbxCommand)
459 uint8_t ret;
461 switch (mbxCommand) {
462 case MBX_LOAD_SM:
463 case MBX_READ_NV:
464 case MBX_WRITE_NV:
465 case MBX_RUN_BIU_DIAG:
466 case MBX_INIT_LINK:
467 case MBX_DOWN_LINK:
468 case MBX_CONFIG_LINK:
469 case MBX_CONFIG_RING:
470 case MBX_RESET_RING:
471 case MBX_READ_CONFIG:
472 case MBX_READ_RCONFIG:
473 case MBX_READ_SPARM:
474 case MBX_READ_STATUS:
475 case MBX_READ_RPI:
476 case MBX_READ_XRI:
477 case MBX_READ_REV:
478 case MBX_READ_LNK_STAT:
479 case MBX_REG_LOGIN:
480 case MBX_UNREG_LOGIN:
481 case MBX_READ_LA:
482 case MBX_CLEAR_LA:
483 case MBX_DUMP_MEMORY:
484 case MBX_DUMP_CONTEXT:
485 case MBX_RUN_DIAGS:
486 case MBX_RESTART:
487 case MBX_UPDATE_CFG:
488 case MBX_DOWN_LOAD:
489 case MBX_DEL_LD_ENTRY:
490 case MBX_RUN_PROGRAM:
491 case MBX_SET_MASK:
492 case MBX_SET_SLIM:
493 case MBX_UNREG_D_ID:
494 case MBX_KILL_BOARD:
495 case MBX_CONFIG_FARP:
496 case MBX_BEACON:
497 case MBX_LOAD_AREA:
498 case MBX_RUN_BIU_DIAG64:
499 case MBX_CONFIG_PORT:
500 case MBX_READ_SPARM64:
501 case MBX_READ_RPI64:
502 case MBX_REG_LOGIN64:
503 case MBX_READ_LA64:
504 case MBX_FLASH_WR_ULA:
505 case MBX_SET_DEBUG:
506 case MBX_LOAD_EXP_ROM:
507 ret = mbxCommand;
508 break;
509 default:
510 ret = MBX_SHUTDOWN;
511 break;
513 return (ret);
515 static void
516 lpfc_sli_wake_mbox_wait(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
518 wait_queue_head_t *pdone_q;
521 * If pdone_q is empty, the driver thread gave up waiting and
522 * continued running.
524 pdone_q = (wait_queue_head_t *) pmboxq->context1;
525 if (pdone_q)
526 wake_up_interruptible(pdone_q);
527 return;
530 void
531 lpfc_sli_def_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
533 struct lpfc_dmabuf *mp;
534 mp = (struct lpfc_dmabuf *) (pmb->context1);
535 if (mp) {
536 lpfc_mbuf_free(phba, mp->virt, mp->phys);
537 kfree(mp);
539 mempool_free( pmb, phba->mbox_mem_pool);
540 return;
544 lpfc_sli_handle_mb_event(struct lpfc_hba * phba)
546 MAILBOX_t *mbox;
547 MAILBOX_t *pmbox;
548 LPFC_MBOXQ_t *pmb;
549 struct lpfc_sli *psli;
550 int i, rc;
551 uint32_t process_next;
553 psli = &phba->sli;
554 /* We should only get here if we are in SLI2 mode */
555 if (!(phba->sli.sli_flag & LPFC_SLI2_ACTIVE)) {
556 return (1);
559 phba->sli.slistat.mbox_event++;
561 /* Get a Mailbox buffer to setup mailbox commands for callback */
562 if ((pmb = phba->sli.mbox_active)) {
563 pmbox = &pmb->mb;
564 mbox = &phba->slim2p->mbx;
566 /* First check out the status word */
567 lpfc_sli_pcimem_bcopy(mbox, pmbox, sizeof (uint32_t));
569 /* Sanity check to ensure the host owns the mailbox */
570 if (pmbox->mbxOwner != OWN_HOST) {
571 /* Lets try for a while */
572 for (i = 0; i < 10240; i++) {
573 /* First copy command data */
574 lpfc_sli_pcimem_bcopy(mbox, pmbox,
575 sizeof (uint32_t));
576 if (pmbox->mbxOwner == OWN_HOST)
577 goto mbout;
579 /* Stray Mailbox Interrupt, mbxCommand <cmd> mbxStatus
580 <status> */
581 lpfc_printf_log(phba,
582 KERN_WARNING,
583 LOG_MBOX | LOG_SLI,
584 "%d:0304 Stray Mailbox Interrupt "
585 "mbxCommand x%x mbxStatus x%x\n",
586 phba->brd_no,
587 pmbox->mbxCommand,
588 pmbox->mbxStatus);
590 spin_lock_irq(phba->host->host_lock);
591 phba->sli.sli_flag |= LPFC_SLI_MBOX_ACTIVE;
592 spin_unlock_irq(phba->host->host_lock);
593 return (1);
596 mbout:
597 del_timer_sync(&phba->sli.mbox_tmo);
598 phba->work_hba_events &= ~WORKER_MBOX_TMO;
601 * It is a fatal error if unknown mbox command completion.
603 if (lpfc_sli_chk_mbx_command(pmbox->mbxCommand) ==
604 MBX_SHUTDOWN) {
606 /* Unknow mailbox command compl */
607 lpfc_printf_log(phba,
608 KERN_ERR,
609 LOG_MBOX | LOG_SLI,
610 "%d:0323 Unknown Mailbox command %x Cmpl\n",
611 phba->brd_no,
612 pmbox->mbxCommand);
613 phba->hba_state = LPFC_HBA_ERROR;
614 phba->work_hs = HS_FFER3;
615 lpfc_handle_eratt(phba);
616 return (0);
619 phba->sli.mbox_active = NULL;
620 if (pmbox->mbxStatus) {
621 phba->sli.slistat.mbox_stat_err++;
622 if (pmbox->mbxStatus == MBXERR_NO_RESOURCES) {
623 /* Mbox cmd cmpl error - RETRYing */
624 lpfc_printf_log(phba,
625 KERN_INFO,
626 LOG_MBOX | LOG_SLI,
627 "%d:0305 Mbox cmd cmpl error - "
628 "RETRYing Data: x%x x%x x%x x%x\n",
629 phba->brd_no,
630 pmbox->mbxCommand,
631 pmbox->mbxStatus,
632 pmbox->un.varWords[0],
633 phba->hba_state);
634 pmbox->mbxStatus = 0;
635 pmbox->mbxOwner = OWN_HOST;
636 spin_lock_irq(phba->host->host_lock);
637 phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
638 spin_unlock_irq(phba->host->host_lock);
639 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
640 if (rc == MBX_SUCCESS)
641 return (0);
645 /* Mailbox cmd <cmd> Cmpl <cmpl> */
646 lpfc_printf_log(phba,
647 KERN_INFO,
648 LOG_MBOX | LOG_SLI,
649 "%d:0307 Mailbox cmd x%x Cmpl x%p "
650 "Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x\n",
651 phba->brd_no,
652 pmbox->mbxCommand,
653 pmb->mbox_cmpl,
654 *((uint32_t *) pmbox),
655 pmbox->un.varWords[0],
656 pmbox->un.varWords[1],
657 pmbox->un.varWords[2],
658 pmbox->un.varWords[3],
659 pmbox->un.varWords[4],
660 pmbox->un.varWords[5],
661 pmbox->un.varWords[6],
662 pmbox->un.varWords[7]);
664 if (pmb->mbox_cmpl) {
665 lpfc_sli_pcimem_bcopy(mbox, pmbox, MAILBOX_CMD_SIZE);
666 pmb->mbox_cmpl(phba,pmb);
671 do {
672 process_next = 0; /* by default don't loop */
673 spin_lock_irq(phba->host->host_lock);
674 phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
676 /* Process next mailbox command if there is one */
677 if ((pmb = lpfc_mbox_get(phba))) {
678 spin_unlock_irq(phba->host->host_lock);
679 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
680 if (rc == MBX_NOT_FINISHED) {
681 pmb->mb.mbxStatus = MBX_NOT_FINISHED;
682 pmb->mbox_cmpl(phba,pmb);
683 process_next = 1;
684 continue; /* loop back */
686 } else {
687 spin_unlock_irq(phba->host->host_lock);
688 /* Turn on IOCB processing */
689 for (i = 0; i < phba->sli.num_rings; i++) {
690 lpfc_sli_turn_on_ring(phba, i);
693 /* Free any lpfc_dmabuf's waiting for mbox cmd cmpls */
694 while (!list_empty(&phba->freebufList)) {
695 struct lpfc_dmabuf *mp;
697 mp = NULL;
698 list_remove_head((&phba->freebufList),
700 struct lpfc_dmabuf,
701 list);
702 if (mp) {
703 lpfc_mbuf_free(phba, mp->virt,
704 mp->phys);
705 kfree(mp);
710 } while (process_next);
712 return (0);
714 static int
715 lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
716 struct lpfc_iocbq *saveq)
718 IOCB_t * irsp;
719 WORD5 * w5p;
720 uint32_t Rctl, Type;
721 uint32_t match, i;
723 match = 0;
724 irsp = &(saveq->iocb);
725 if ((irsp->ulpCommand == CMD_RCV_ELS_REQ64_CX)
726 || (irsp->ulpCommand == CMD_RCV_ELS_REQ_CX)) {
727 Rctl = FC_ELS_REQ;
728 Type = FC_ELS_DATA;
729 } else {
730 w5p =
731 (WORD5 *) & (saveq->iocb.un.
732 ulpWord[5]);
733 Rctl = w5p->hcsw.Rctl;
734 Type = w5p->hcsw.Type;
736 /* Firmware Workaround */
737 if ((Rctl == 0) && (pring->ringno == LPFC_ELS_RING) &&
738 (irsp->ulpCommand == CMD_RCV_SEQUENCE64_CX)) {
739 Rctl = FC_ELS_REQ;
740 Type = FC_ELS_DATA;
741 w5p->hcsw.Rctl = Rctl;
742 w5p->hcsw.Type = Type;
745 /* unSolicited Responses */
746 if (pring->prt[0].profile) {
747 if (pring->prt[0].lpfc_sli_rcv_unsol_event)
748 (pring->prt[0].lpfc_sli_rcv_unsol_event) (phba, pring,
749 saveq);
750 match = 1;
751 } else {
752 /* We must search, based on rctl / type
753 for the right routine */
754 for (i = 0; i < pring->num_mask;
755 i++) {
756 if ((pring->prt[i].rctl ==
757 Rctl)
758 && (pring->prt[i].
759 type == Type)) {
760 if (pring->prt[i].lpfc_sli_rcv_unsol_event)
761 (pring->prt[i].lpfc_sli_rcv_unsol_event)
762 (phba, pring, saveq);
763 match = 1;
764 break;
768 if (match == 0) {
769 /* Unexpected Rctl / Type received */
770 /* Ring <ringno> handler: unexpected
771 Rctl <Rctl> Type <Type> received */
772 lpfc_printf_log(phba,
773 KERN_WARNING,
774 LOG_SLI,
775 "%d:0313 Ring %d handler: unexpected Rctl x%x "
776 "Type x%x received \n",
777 phba->brd_no,
778 pring->ringno,
779 Rctl,
780 Type);
782 return(1);
785 static struct lpfc_iocbq *
786 lpfc_sli_iocbq_lookup(struct lpfc_hba * phba,
787 struct lpfc_sli_ring * pring,
788 struct lpfc_iocbq * prspiocb)
790 struct lpfc_iocbq *cmd_iocb = NULL;
791 uint16_t iotag;
793 iotag = prspiocb->iocb.ulpIoTag;
795 if (iotag != 0 && iotag <= phba->sli.last_iotag) {
796 cmd_iocb = phba->sli.iocbq_lookup[iotag];
797 list_del(&cmd_iocb->list);
798 pring->txcmplq_cnt--;
799 return cmd_iocb;
802 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
803 "%d:0317 iotag x%x is out off "
804 "range: max iotag x%x wd0 x%x\n",
805 phba->brd_no, iotag,
806 phba->sli.last_iotag,
807 *(((uint32_t *) &prspiocb->iocb) + 7));
808 return NULL;
811 static int
812 lpfc_sli_process_sol_iocb(struct lpfc_hba * phba, struct lpfc_sli_ring * pring,
813 struct lpfc_iocbq *saveq)
815 struct lpfc_iocbq * cmdiocbp;
816 int rc = 1;
817 unsigned long iflag;
819 /* Based on the iotag field, get the cmd IOCB from the txcmplq */
820 spin_lock_irqsave(phba->host->host_lock, iflag);
821 cmdiocbp = lpfc_sli_iocbq_lookup(phba, pring, saveq);
822 if (cmdiocbp) {
823 if (cmdiocbp->iocb_cmpl) {
825 * Post all ELS completions to the worker thread.
826 * All other are passed to the completion callback.
828 if (pring->ringno == LPFC_ELS_RING) {
829 spin_unlock_irqrestore(phba->host->host_lock,
830 iflag);
831 (cmdiocbp->iocb_cmpl) (phba, cmdiocbp, saveq);
832 spin_lock_irqsave(phba->host->host_lock, iflag);
834 else {
835 spin_unlock_irqrestore(phba->host->host_lock,
836 iflag);
837 (cmdiocbp->iocb_cmpl) (phba, cmdiocbp, saveq);
838 spin_lock_irqsave(phba->host->host_lock, iflag);
840 } else
841 lpfc_sli_release_iocbq(phba, cmdiocbp);
842 } else {
844 * Unknown initiating command based on the response iotag.
845 * This could be the case on the ELS ring because of
846 * lpfc_els_abort().
848 if (pring->ringno != LPFC_ELS_RING) {
850 * Ring <ringno> handler: unexpected completion IoTag
851 * <IoTag>
853 lpfc_printf_log(phba,
854 KERN_WARNING,
855 LOG_SLI,
856 "%d:0322 Ring %d handler: unexpected "
857 "completion IoTag x%x Data: x%x x%x x%x x%x\n",
858 phba->brd_no,
859 pring->ringno,
860 saveq->iocb.ulpIoTag,
861 saveq->iocb.ulpStatus,
862 saveq->iocb.un.ulpWord[4],
863 saveq->iocb.ulpCommand,
864 saveq->iocb.ulpContext);
868 spin_unlock_irqrestore(phba->host->host_lock, iflag);
869 return rc;
872 static void lpfc_sli_rsp_pointers_error(struct lpfc_hba * phba,
873 struct lpfc_sli_ring * pring)
875 struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[pring->ringno];
877 * Ring <ringno> handler: portRspPut <portRspPut> is bigger then
878 * rsp ring <portRspMax>
880 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
881 "%d:0312 Ring %d handler: portRspPut %d "
882 "is bigger then rsp ring %d\n",
883 phba->brd_no, pring->ringno,
884 le32_to_cpu(pgp->rspPutInx),
885 pring->numRiocb);
887 phba->hba_state = LPFC_HBA_ERROR;
890 * All error attention handlers are posted to
891 * worker thread
893 phba->work_ha |= HA_ERATT;
894 phba->work_hs = HS_FFER3;
895 if (phba->work_wait)
896 wake_up(phba->work_wait);
898 return;
901 void lpfc_sli_poll_fcp_ring(struct lpfc_hba * phba)
903 struct lpfc_sli * psli = &phba->sli;
904 struct lpfc_sli_ring * pring = &psli->ring[LPFC_FCP_RING];
905 IOCB_t *irsp = NULL;
906 IOCB_t *entry = NULL;
907 struct lpfc_iocbq *cmdiocbq = NULL;
908 struct lpfc_iocbq rspiocbq;
909 struct lpfc_pgp *pgp;
910 uint32_t status;
911 uint32_t portRspPut, portRspMax;
912 int type;
913 uint32_t rsp_cmpl = 0;
914 void __iomem *to_slim;
915 uint32_t ha_copy;
917 pring->stats.iocb_event++;
919 /* The driver assumes SLI-2 mode */
920 pgp = &phba->slim2p->mbx.us.s2.port[pring->ringno];
923 * The next available response entry should never exceed the maximum
924 * entries. If it does, treat it as an adapter hardware error.
926 portRspMax = pring->numRiocb;
927 portRspPut = le32_to_cpu(pgp->rspPutInx);
928 if (unlikely(portRspPut >= portRspMax)) {
929 lpfc_sli_rsp_pointers_error(phba, pring);
930 return;
933 rmb();
934 while (pring->rspidx != portRspPut) {
936 entry = IOCB_ENTRY(pring->rspringaddr, pring->rspidx);
938 if (++pring->rspidx >= portRspMax)
939 pring->rspidx = 0;
941 lpfc_sli_pcimem_bcopy((uint32_t *) entry,
942 (uint32_t *) &rspiocbq.iocb,
943 sizeof (IOCB_t));
944 irsp = &rspiocbq.iocb;
945 type = lpfc_sli_iocb_cmd_type(irsp->ulpCommand & CMD_IOCB_MASK);
946 pring->stats.iocb_rsp++;
947 rsp_cmpl++;
949 if (unlikely(irsp->ulpStatus)) {
950 /* Rsp ring <ringno> error: IOCB */
951 lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
952 "%d:0326 Rsp Ring %d error: IOCB Data: "
953 "x%x x%x x%x x%x x%x x%x x%x x%x\n",
954 phba->brd_no, pring->ringno,
955 irsp->un.ulpWord[0],
956 irsp->un.ulpWord[1],
957 irsp->un.ulpWord[2],
958 irsp->un.ulpWord[3],
959 irsp->un.ulpWord[4],
960 irsp->un.ulpWord[5],
961 *(((uint32_t *) irsp) + 6),
962 *(((uint32_t *) irsp) + 7));
965 switch (type) {
966 case LPFC_ABORT_IOCB:
967 case LPFC_SOL_IOCB:
969 * Idle exchange closed via ABTS from port. No iocb
970 * resources need to be recovered.
972 if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) {
973 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
974 "%d:0314 IOCB cmd 0x%x"
975 " processed. Skipping"
976 " completion", phba->brd_no,
977 irsp->ulpCommand);
978 break;
981 cmdiocbq = lpfc_sli_iocbq_lookup(phba, pring,
982 &rspiocbq);
983 if ((cmdiocbq) && (cmdiocbq->iocb_cmpl)) {
984 (cmdiocbq->iocb_cmpl)(phba, cmdiocbq,
985 &rspiocbq);
987 break;
988 default:
989 if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
990 char adaptermsg[LPFC_MAX_ADPTMSG];
991 memset(adaptermsg, 0, LPFC_MAX_ADPTMSG);
992 memcpy(&adaptermsg[0], (uint8_t *) irsp,
993 MAX_MSG_DATA);
994 dev_warn(&((phba->pcidev)->dev), "lpfc%d: %s",
995 phba->brd_no, adaptermsg);
996 } else {
997 /* Unknown IOCB command */
998 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
999 "%d:0321 Unknown IOCB command "
1000 "Data: x%x, x%x x%x x%x x%x\n",
1001 phba->brd_no, type,
1002 irsp->ulpCommand,
1003 irsp->ulpStatus,
1004 irsp->ulpIoTag,
1005 irsp->ulpContext);
1007 break;
1011 * The response IOCB has been processed. Update the ring
1012 * pointer in SLIM. If the port response put pointer has not
1013 * been updated, sync the pgp->rspPutInx and fetch the new port
1014 * response put pointer.
1016 to_slim = phba->MBslimaddr +
1017 (SLIMOFF + (pring->ringno * 2) + 1) * 4;
1018 writeb(pring->rspidx, to_slim);
1020 if (pring->rspidx == portRspPut)
1021 portRspPut = le32_to_cpu(pgp->rspPutInx);
1024 ha_copy = readl(phba->HAregaddr);
1025 ha_copy >>= (LPFC_FCP_RING * 4);
1027 if ((rsp_cmpl > 0) && (ha_copy & HA_R0RE_REQ)) {
1028 pring->stats.iocb_rsp_full++;
1029 status = ((CA_R0ATT | CA_R0RE_RSP) << (LPFC_FCP_RING * 4));
1030 writel(status, phba->CAregaddr);
1031 readl(phba->CAregaddr);
1033 if ((ha_copy & HA_R0CE_RSP) &&
1034 (pring->flag & LPFC_CALL_RING_AVAILABLE)) {
1035 pring->flag &= ~LPFC_CALL_RING_AVAILABLE;
1036 pring->stats.iocb_cmd_empty++;
1038 /* Force update of the local copy of cmdGetInx */
1039 pring->local_getidx = le32_to_cpu(pgp->cmdGetInx);
1040 lpfc_sli_resume_iocb(phba, pring);
1042 if ((pring->lpfc_sli_cmd_available))
1043 (pring->lpfc_sli_cmd_available) (phba, pring);
1047 return;
1051 * This routine presumes LPFC_FCP_RING handling and doesn't bother
1052 * to check it explicitly.
1054 static int
1055 lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba,
1056 struct lpfc_sli_ring * pring, uint32_t mask)
1058 struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[pring->ringno];
1059 IOCB_t *irsp = NULL;
1060 IOCB_t *entry = NULL;
1061 struct lpfc_iocbq *cmdiocbq = NULL;
1062 struct lpfc_iocbq rspiocbq;
1063 uint32_t status;
1064 uint32_t portRspPut, portRspMax;
1065 int rc = 1;
1066 lpfc_iocb_type type;
1067 unsigned long iflag;
1068 uint32_t rsp_cmpl = 0;
1069 void __iomem *to_slim;
1071 spin_lock_irqsave(phba->host->host_lock, iflag);
1072 pring->stats.iocb_event++;
1075 * The next available response entry should never exceed the maximum
1076 * entries. If it does, treat it as an adapter hardware error.
1078 portRspMax = pring->numRiocb;
1079 portRspPut = le32_to_cpu(pgp->rspPutInx);
1080 if (unlikely(portRspPut >= portRspMax)) {
1081 lpfc_sli_rsp_pointers_error(phba, pring);
1082 spin_unlock_irqrestore(phba->host->host_lock, iflag);
1083 return 1;
1086 rmb();
1087 while (pring->rspidx != portRspPut) {
1089 * Fetch an entry off the ring and copy it into a local data
1090 * structure. The copy involves a byte-swap since the
1091 * network byte order and pci byte orders are different.
1093 entry = IOCB_ENTRY(pring->rspringaddr, pring->rspidx);
1095 if (++pring->rspidx >= portRspMax)
1096 pring->rspidx = 0;
1098 lpfc_sli_pcimem_bcopy((uint32_t *) entry,
1099 (uint32_t *) &rspiocbq.iocb,
1100 sizeof (IOCB_t));
1101 irsp = &rspiocbq.iocb;
1103 type = lpfc_sli_iocb_cmd_type(irsp->ulpCommand & CMD_IOCB_MASK);
1104 pring->stats.iocb_rsp++;
1105 rsp_cmpl++;
1107 if (unlikely(irsp->ulpStatus)) {
1108 /* Rsp ring <ringno> error: IOCB */
1109 lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
1110 "%d:0336 Rsp Ring %d error: IOCB Data: "
1111 "x%x x%x x%x x%x x%x x%x x%x x%x\n",
1112 phba->brd_no, pring->ringno,
1113 irsp->un.ulpWord[0], irsp->un.ulpWord[1],
1114 irsp->un.ulpWord[2], irsp->un.ulpWord[3],
1115 irsp->un.ulpWord[4], irsp->un.ulpWord[5],
1116 *(((uint32_t *) irsp) + 6),
1117 *(((uint32_t *) irsp) + 7));
1120 switch (type) {
1121 case LPFC_ABORT_IOCB:
1122 case LPFC_SOL_IOCB:
1124 * Idle exchange closed via ABTS from port. No iocb
1125 * resources need to be recovered.
1127 if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) {
1128 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
1129 "%d:0333 IOCB cmd 0x%x"
1130 " processed. Skipping"
1131 " completion\n", phba->brd_no,
1132 irsp->ulpCommand);
1133 break;
1136 cmdiocbq = lpfc_sli_iocbq_lookup(phba, pring,
1137 &rspiocbq);
1138 if ((cmdiocbq) && (cmdiocbq->iocb_cmpl)) {
1139 if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
1140 (cmdiocbq->iocb_cmpl)(phba, cmdiocbq,
1141 &rspiocbq);
1142 } else {
1143 spin_unlock_irqrestore(
1144 phba->host->host_lock, iflag);
1145 (cmdiocbq->iocb_cmpl)(phba, cmdiocbq,
1146 &rspiocbq);
1147 spin_lock_irqsave(phba->host->host_lock,
1148 iflag);
1151 break;
1152 default:
1153 if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
1154 char adaptermsg[LPFC_MAX_ADPTMSG];
1155 memset(adaptermsg, 0, LPFC_MAX_ADPTMSG);
1156 memcpy(&adaptermsg[0], (uint8_t *) irsp,
1157 MAX_MSG_DATA);
1158 dev_warn(&((phba->pcidev)->dev), "lpfc%d: %s",
1159 phba->brd_no, adaptermsg);
1160 } else {
1161 /* Unknown IOCB command */
1162 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
1163 "%d:0334 Unknown IOCB command "
1164 "Data: x%x, x%x x%x x%x x%x\n",
1165 phba->brd_no, type, irsp->ulpCommand,
1166 irsp->ulpStatus, irsp->ulpIoTag,
1167 irsp->ulpContext);
1169 break;
1173 * The response IOCB has been processed. Update the ring
1174 * pointer in SLIM. If the port response put pointer has not
1175 * been updated, sync the pgp->rspPutInx and fetch the new port
1176 * response put pointer.
1178 to_slim = phba->MBslimaddr +
1179 (SLIMOFF + (pring->ringno * 2) + 1) * 4;
1180 writel(pring->rspidx, to_slim);
1182 if (pring->rspidx == portRspPut)
1183 portRspPut = le32_to_cpu(pgp->rspPutInx);
1186 if ((rsp_cmpl > 0) && (mask & HA_R0RE_REQ)) {
1187 pring->stats.iocb_rsp_full++;
1188 status = ((CA_R0ATT | CA_R0RE_RSP) << (pring->ringno * 4));
1189 writel(status, phba->CAregaddr);
1190 readl(phba->CAregaddr);
1192 if ((mask & HA_R0CE_RSP) && (pring->flag & LPFC_CALL_RING_AVAILABLE)) {
1193 pring->flag &= ~LPFC_CALL_RING_AVAILABLE;
1194 pring->stats.iocb_cmd_empty++;
1196 /* Force update of the local copy of cmdGetInx */
1197 pring->local_getidx = le32_to_cpu(pgp->cmdGetInx);
1198 lpfc_sli_resume_iocb(phba, pring);
1200 if ((pring->lpfc_sli_cmd_available))
1201 (pring->lpfc_sli_cmd_available) (phba, pring);
1205 spin_unlock_irqrestore(phba->host->host_lock, iflag);
1206 return rc;
1211 lpfc_sli_handle_slow_ring_event(struct lpfc_hba * phba,
1212 struct lpfc_sli_ring * pring, uint32_t mask)
1214 IOCB_t *entry;
1215 IOCB_t *irsp = NULL;
1216 struct lpfc_iocbq *rspiocbp = NULL;
1217 struct lpfc_iocbq *next_iocb;
1218 struct lpfc_iocbq *cmdiocbp;
1219 struct lpfc_iocbq *saveq;
1220 struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[pring->ringno];
1221 uint8_t iocb_cmd_type;
1222 lpfc_iocb_type type;
1223 uint32_t status, free_saveq;
1224 uint32_t portRspPut, portRspMax;
1225 int rc = 1;
1226 unsigned long iflag;
1227 void __iomem *to_slim;
1229 spin_lock_irqsave(phba->host->host_lock, iflag);
1230 pring->stats.iocb_event++;
1233 * The next available response entry should never exceed the maximum
1234 * entries. If it does, treat it as an adapter hardware error.
1236 portRspMax = pring->numRiocb;
1237 portRspPut = le32_to_cpu(pgp->rspPutInx);
1238 if (portRspPut >= portRspMax) {
1240 * Ring <ringno> handler: portRspPut <portRspPut> is bigger then
1241 * rsp ring <portRspMax>
1243 lpfc_printf_log(phba,
1244 KERN_ERR,
1245 LOG_SLI,
1246 "%d:0303 Ring %d handler: portRspPut %d "
1247 "is bigger then rsp ring %d\n",
1248 phba->brd_no,
1249 pring->ringno, portRspPut, portRspMax);
1251 phba->hba_state = LPFC_HBA_ERROR;
1252 spin_unlock_irqrestore(phba->host->host_lock, iflag);
1254 phba->work_hs = HS_FFER3;
1255 lpfc_handle_eratt(phba);
1257 return 1;
1260 rmb();
1261 while (pring->rspidx != portRspPut) {
1263 * Build a completion list and call the appropriate handler.
1264 * The process is to get the next available response iocb, get
1265 * a free iocb from the list, copy the response data into the
1266 * free iocb, insert to the continuation list, and update the
1267 * next response index to slim. This process makes response
1268 * iocb's in the ring available to DMA as fast as possible but
1269 * pays a penalty for a copy operation. Since the iocb is
1270 * only 32 bytes, this penalty is considered small relative to
1271 * the PCI reads for register values and a slim write. When
1272 * the ulpLe field is set, the entire Command has been
1273 * received.
1275 entry = IOCB_ENTRY(pring->rspringaddr, pring->rspidx);
1276 rspiocbp = lpfc_sli_get_iocbq(phba);
1277 if (rspiocbp == NULL) {
1278 printk(KERN_ERR "%s: out of buffers! Failing "
1279 "completion.\n", __FUNCTION__);
1280 break;
1283 lpfc_sli_pcimem_bcopy(entry, &rspiocbp->iocb, sizeof (IOCB_t));
1284 irsp = &rspiocbp->iocb;
1286 if (++pring->rspidx >= portRspMax)
1287 pring->rspidx = 0;
1289 to_slim = phba->MBslimaddr + (SLIMOFF + (pring->ringno * 2)
1290 + 1) * 4;
1291 writel(pring->rspidx, to_slim);
1293 if (list_empty(&(pring->iocb_continueq))) {
1294 list_add(&rspiocbp->list, &(pring->iocb_continueq));
1295 } else {
1296 list_add_tail(&rspiocbp->list,
1297 &(pring->iocb_continueq));
1300 pring->iocb_continueq_cnt++;
1301 if (irsp->ulpLe) {
1303 * By default, the driver expects to free all resources
1304 * associated with this iocb completion.
1306 free_saveq = 1;
1307 saveq = list_get_first(&pring->iocb_continueq,
1308 struct lpfc_iocbq, list);
1309 irsp = &(saveq->iocb);
1310 list_del_init(&pring->iocb_continueq);
1311 pring->iocb_continueq_cnt = 0;
1313 pring->stats.iocb_rsp++;
1315 if (irsp->ulpStatus) {
1316 /* Rsp ring <ringno> error: IOCB */
1317 lpfc_printf_log(phba,
1318 KERN_WARNING,
1319 LOG_SLI,
1320 "%d:0328 Rsp Ring %d error: IOCB Data: "
1321 "x%x x%x x%x x%x x%x x%x x%x x%x\n",
1322 phba->brd_no,
1323 pring->ringno,
1324 irsp->un.ulpWord[0],
1325 irsp->un.ulpWord[1],
1326 irsp->un.ulpWord[2],
1327 irsp->un.ulpWord[3],
1328 irsp->un.ulpWord[4],
1329 irsp->un.ulpWord[5],
1330 *(((uint32_t *) irsp) + 6),
1331 *(((uint32_t *) irsp) + 7));
1335 * Fetch the IOCB command type and call the correct
1336 * completion routine. Solicited and Unsolicited
1337 * IOCBs on the ELS ring get freed back to the
1338 * lpfc_iocb_list by the discovery kernel thread.
1340 iocb_cmd_type = irsp->ulpCommand & CMD_IOCB_MASK;
1341 type = lpfc_sli_iocb_cmd_type(iocb_cmd_type);
1342 if (type == LPFC_SOL_IOCB) {
1343 spin_unlock_irqrestore(phba->host->host_lock,
1344 iflag);
1345 rc = lpfc_sli_process_sol_iocb(phba, pring,
1346 saveq);
1347 spin_lock_irqsave(phba->host->host_lock, iflag);
1348 } else if (type == LPFC_UNSOL_IOCB) {
1349 spin_unlock_irqrestore(phba->host->host_lock,
1350 iflag);
1351 rc = lpfc_sli_process_unsol_iocb(phba, pring,
1352 saveq);
1353 spin_lock_irqsave(phba->host->host_lock, iflag);
1354 } else if (type == LPFC_ABORT_IOCB) {
1355 if ((irsp->ulpCommand != CMD_XRI_ABORTED_CX) &&
1356 ((cmdiocbp =
1357 lpfc_sli_iocbq_lookup(phba, pring,
1358 saveq)))) {
1359 /* Call the specified completion
1360 routine */
1361 if (cmdiocbp->iocb_cmpl) {
1362 spin_unlock_irqrestore(
1363 phba->host->host_lock,
1364 iflag);
1365 (cmdiocbp->iocb_cmpl) (phba,
1366 cmdiocbp, saveq);
1367 spin_lock_irqsave(
1368 phba->host->host_lock,
1369 iflag);
1370 } else
1371 lpfc_sli_release_iocbq(phba,
1372 cmdiocbp);
1374 } else if (type == LPFC_UNKNOWN_IOCB) {
1375 if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
1377 char adaptermsg[LPFC_MAX_ADPTMSG];
1379 memset(adaptermsg, 0,
1380 LPFC_MAX_ADPTMSG);
1381 memcpy(&adaptermsg[0], (uint8_t *) irsp,
1382 MAX_MSG_DATA);
1383 dev_warn(&((phba->pcidev)->dev),
1384 "lpfc%d: %s",
1385 phba->brd_no, adaptermsg);
1386 } else {
1387 /* Unknown IOCB command */
1388 lpfc_printf_log(phba,
1389 KERN_ERR,
1390 LOG_SLI,
1391 "%d:0335 Unknown IOCB command "
1392 "Data: x%x x%x x%x x%x\n",
1393 phba->brd_no,
1394 irsp->ulpCommand,
1395 irsp->ulpStatus,
1396 irsp->ulpIoTag,
1397 irsp->ulpContext);
1401 if (free_saveq) {
1402 if (!list_empty(&saveq->list)) {
1403 list_for_each_entry_safe(rspiocbp,
1404 next_iocb,
1405 &saveq->list,
1406 list) {
1407 list_del(&rspiocbp->list);
1408 lpfc_sli_release_iocbq(phba,
1409 rspiocbp);
1412 lpfc_sli_release_iocbq(phba, saveq);
1417 * If the port response put pointer has not been updated, sync
1418 * the pgp->rspPutInx in the MAILBOX_tand fetch the new port
1419 * response put pointer.
1421 if (pring->rspidx == portRspPut) {
1422 portRspPut = le32_to_cpu(pgp->rspPutInx);
1424 } /* while (pring->rspidx != portRspPut) */
1426 if ((rspiocbp != 0) && (mask & HA_R0RE_REQ)) {
1427 /* At least one response entry has been freed */
1428 pring->stats.iocb_rsp_full++;
1429 /* SET RxRE_RSP in Chip Att register */
1430 status = ((CA_R0ATT | CA_R0RE_RSP) << (pring->ringno * 4));
1431 writel(status, phba->CAregaddr);
1432 readl(phba->CAregaddr); /* flush */
1434 if ((mask & HA_R0CE_RSP) && (pring->flag & LPFC_CALL_RING_AVAILABLE)) {
1435 pring->flag &= ~LPFC_CALL_RING_AVAILABLE;
1436 pring->stats.iocb_cmd_empty++;
1438 /* Force update of the local copy of cmdGetInx */
1439 pring->local_getidx = le32_to_cpu(pgp->cmdGetInx);
1440 lpfc_sli_resume_iocb(phba, pring);
1442 if ((pring->lpfc_sli_cmd_available))
1443 (pring->lpfc_sli_cmd_available) (phba, pring);
1447 spin_unlock_irqrestore(phba->host->host_lock, iflag);
1448 return rc;
1452 lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
1454 struct lpfc_iocbq *iocb, *next_iocb;
1455 IOCB_t *icmd = NULL, *cmd = NULL;
1456 int errcnt;
1458 errcnt = 0;
1460 /* Error everything on txq and txcmplq
1461 * First do the txq.
1463 spin_lock_irq(phba->host->host_lock);
1464 list_for_each_entry_safe(iocb, next_iocb, &pring->txq, list) {
1465 list_del_init(&iocb->list);
1466 if (iocb->iocb_cmpl) {
1467 icmd = &iocb->iocb;
1468 icmd->ulpStatus = IOSTAT_LOCAL_REJECT;
1469 icmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
1470 spin_unlock_irq(phba->host->host_lock);
1471 (iocb->iocb_cmpl) (phba, iocb, iocb);
1472 spin_lock_irq(phba->host->host_lock);
1473 } else
1474 lpfc_sli_release_iocbq(phba, iocb);
1476 pring->txq_cnt = 0;
1477 INIT_LIST_HEAD(&(pring->txq));
1479 /* Next issue ABTS for everything on the txcmplq */
1480 list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list) {
1481 cmd = &iocb->iocb;
1484 * Imediate abort of IOCB, deque and call compl
1487 list_del_init(&iocb->list);
1488 pring->txcmplq_cnt--;
1490 if (iocb->iocb_cmpl) {
1491 cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
1492 cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
1493 spin_unlock_irq(phba->host->host_lock);
1494 (iocb->iocb_cmpl) (phba, iocb, iocb);
1495 spin_lock_irq(phba->host->host_lock);
1496 } else
1497 lpfc_sli_release_iocbq(phba, iocb);
1500 INIT_LIST_HEAD(&pring->txcmplq);
1501 pring->txcmplq_cnt = 0;
1502 spin_unlock_irq(phba->host->host_lock);
1504 return errcnt;
1508 lpfc_sli_brdready(struct lpfc_hba * phba, uint32_t mask)
1510 uint32_t status;
1511 int i = 0;
1512 int retval = 0;
1514 /* Read the HBA Host Status Register */
1515 status = readl(phba->HSregaddr);
1518 * Check status register every 100ms for 5 retries, then every
1519 * 500ms for 5, then every 2.5 sec for 5, then reset board and
1520 * every 2.5 sec for 4.
1521 * Break our of the loop if errors occurred during init.
1523 while (((status & mask) != mask) &&
1524 !(status & HS_FFERM) &&
1525 i++ < 20) {
1527 if (i <= 5)
1528 msleep(10);
1529 else if (i <= 10)
1530 msleep(500);
1531 else
1532 msleep(2500);
1534 if (i == 15) {
1535 phba->hba_state = LPFC_STATE_UNKNOWN; /* Do post */
1536 lpfc_sli_brdrestart(phba);
1538 /* Read the HBA Host Status Register */
1539 status = readl(phba->HSregaddr);
1542 /* Check to see if any errors occurred during init */
1543 if ((status & HS_FFERM) || (i >= 20)) {
1544 phba->hba_state = LPFC_HBA_ERROR;
1545 retval = 1;
1548 return retval;
1551 #define BARRIER_TEST_PATTERN (0xdeadbeef)
1553 void lpfc_reset_barrier(struct lpfc_hba * phba)
1555 uint32_t __iomem *resp_buf;
1556 uint32_t __iomem *mbox_buf;
1557 volatile uint32_t mbox;
1558 uint32_t hc_copy;
1559 int i;
1560 uint8_t hdrtype;
1562 pci_read_config_byte(phba->pcidev, PCI_HEADER_TYPE, &hdrtype);
1563 if (hdrtype != 0x80 ||
1564 (FC_JEDEC_ID(phba->vpd.rev.biuRev) != HELIOS_JEDEC_ID &&
1565 FC_JEDEC_ID(phba->vpd.rev.biuRev) != THOR_JEDEC_ID))
1566 return;
1569 * Tell the other part of the chip to suspend temporarily all
1570 * its DMA activity.
1572 resp_buf = phba->MBslimaddr;
1574 /* Disable the error attention */
1575 hc_copy = readl(phba->HCregaddr);
1576 writel((hc_copy & ~HC_ERINT_ENA), phba->HCregaddr);
1577 readl(phba->HCregaddr); /* flush */
1579 if (readl(phba->HAregaddr) & HA_ERATT) {
1580 /* Clear Chip error bit */
1581 writel(HA_ERATT, phba->HAregaddr);
1582 phba->stopped = 1;
1585 mbox = 0;
1586 ((MAILBOX_t *)&mbox)->mbxCommand = MBX_KILL_BOARD;
1587 ((MAILBOX_t *)&mbox)->mbxOwner = OWN_CHIP;
1589 writel(BARRIER_TEST_PATTERN, (resp_buf + 1));
1590 mbox_buf = phba->MBslimaddr;
1591 writel(mbox, mbox_buf);
1593 for (i = 0;
1594 readl(resp_buf + 1) != ~(BARRIER_TEST_PATTERN) && i < 50; i++)
1595 mdelay(1);
1597 if (readl(resp_buf + 1) != ~(BARRIER_TEST_PATTERN)) {
1598 if (phba->sli.sli_flag & LPFC_SLI2_ACTIVE ||
1599 phba->stopped)
1600 goto restore_hc;
1601 else
1602 goto clear_errat;
1605 ((MAILBOX_t *)&mbox)->mbxOwner = OWN_HOST;
1606 for (i = 0; readl(resp_buf) != mbox && i < 500; i++)
1607 mdelay(1);
1609 clear_errat:
1611 while (!(readl(phba->HAregaddr) & HA_ERATT) && ++i < 500)
1612 mdelay(1);
1614 if (readl(phba->HAregaddr) & HA_ERATT) {
1615 writel(HA_ERATT, phba->HAregaddr);
1616 phba->stopped = 1;
1619 restore_hc:
1620 writel(hc_copy, phba->HCregaddr);
1621 readl(phba->HCregaddr); /* flush */
1625 lpfc_sli_brdkill(struct lpfc_hba * phba)
1627 struct lpfc_sli *psli;
1628 LPFC_MBOXQ_t *pmb;
1629 uint32_t status;
1630 uint32_t ha_copy;
1631 int retval;
1632 int i = 0;
1634 psli = &phba->sli;
1636 /* Kill HBA */
1637 lpfc_printf_log(phba,
1638 KERN_INFO,
1639 LOG_SLI,
1640 "%d:0329 Kill HBA Data: x%x x%x\n",
1641 phba->brd_no,
1642 phba->hba_state,
1643 psli->sli_flag);
1645 if ((pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
1646 GFP_KERNEL)) == 0)
1647 return 1;
1649 /* Disable the error attention */
1650 spin_lock_irq(phba->host->host_lock);
1651 status = readl(phba->HCregaddr);
1652 status &= ~HC_ERINT_ENA;
1653 writel(status, phba->HCregaddr);
1654 readl(phba->HCregaddr); /* flush */
1655 spin_unlock_irq(phba->host->host_lock);
1657 lpfc_kill_board(phba, pmb);
1658 pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
1659 retval = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
1661 if (retval != MBX_SUCCESS) {
1662 if (retval != MBX_BUSY)
1663 mempool_free(pmb, phba->mbox_mem_pool);
1664 return 1;
1667 psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
1669 mempool_free(pmb, phba->mbox_mem_pool);
1671 /* There is no completion for a KILL_BOARD mbox cmd. Check for an error
1672 * attention every 100ms for 3 seconds. If we don't get ERATT after
1673 * 3 seconds we still set HBA_ERROR state because the status of the
1674 * board is now undefined.
1676 ha_copy = readl(phba->HAregaddr);
1678 while ((i++ < 30) && !(ha_copy & HA_ERATT)) {
1679 mdelay(100);
1680 ha_copy = readl(phba->HAregaddr);
1683 del_timer_sync(&psli->mbox_tmo);
1684 if (ha_copy & HA_ERATT) {
1685 writel(HA_ERATT, phba->HAregaddr);
1686 phba->stopped = 1;
1688 spin_lock_irq(phba->host->host_lock);
1689 psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
1690 spin_unlock_irq(phba->host->host_lock);
1692 psli->mbox_active = NULL;
1693 lpfc_hba_down_post(phba);
1694 phba->hba_state = LPFC_HBA_ERROR;
1696 return (ha_copy & HA_ERATT ? 0 : 1);
1700 lpfc_sli_brdreset(struct lpfc_hba * phba)
1702 struct lpfc_sli *psli;
1703 struct lpfc_sli_ring *pring;
1704 uint16_t cfg_value;
1705 int i;
1707 psli = &phba->sli;
1709 /* Reset HBA */
1710 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
1711 "%d:0325 Reset HBA Data: x%x x%x\n", phba->brd_no,
1712 phba->hba_state, psli->sli_flag);
1714 /* perform board reset */
1715 phba->fc_eventTag = 0;
1716 phba->fc_myDID = 0;
1717 phba->fc_prevDID = 0;
1719 /* Turn off parity checking and serr during the physical reset */
1720 pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value);
1721 pci_write_config_word(phba->pcidev, PCI_COMMAND,
1722 (cfg_value &
1723 ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
1725 psli->sli_flag &= ~(LPFC_SLI2_ACTIVE | LPFC_PROCESS_LA);
1726 /* Now toggle INITFF bit in the Host Control Register */
1727 writel(HC_INITFF, phba->HCregaddr);
1728 mdelay(1);
1729 readl(phba->HCregaddr); /* flush */
1730 writel(0, phba->HCregaddr);
1731 readl(phba->HCregaddr); /* flush */
1733 /* Restore PCI cmd register */
1734 pci_write_config_word(phba->pcidev, PCI_COMMAND, cfg_value);
1736 /* Initialize relevant SLI info */
1737 for (i = 0; i < psli->num_rings; i++) {
1738 pring = &psli->ring[i];
1739 pring->flag = 0;
1740 pring->rspidx = 0;
1741 pring->next_cmdidx = 0;
1742 pring->local_getidx = 0;
1743 pring->cmdidx = 0;
1744 pring->missbufcnt = 0;
1747 phba->hba_state = LPFC_WARM_START;
1748 return 0;
1752 lpfc_sli_brdrestart(struct lpfc_hba * phba)
1754 MAILBOX_t *mb;
1755 struct lpfc_sli *psli;
1756 uint16_t skip_post;
1757 volatile uint32_t word0;
1758 void __iomem *to_slim;
1760 spin_lock_irq(phba->host->host_lock);
1762 psli = &phba->sli;
1764 /* Restart HBA */
1765 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
1766 "%d:0337 Restart HBA Data: x%x x%x\n", phba->brd_no,
1767 phba->hba_state, psli->sli_flag);
1769 word0 = 0;
1770 mb = (MAILBOX_t *) &word0;
1771 mb->mbxCommand = MBX_RESTART;
1772 mb->mbxHc = 1;
1774 lpfc_reset_barrier(phba);
1776 to_slim = phba->MBslimaddr;
1777 writel(*(uint32_t *) mb, to_slim);
1778 readl(to_slim); /* flush */
1780 /* Only skip post after fc_ffinit is completed */
1781 if (phba->hba_state) {
1782 skip_post = 1;
1783 word0 = 1; /* This is really setting up word1 */
1784 } else {
1785 skip_post = 0;
1786 word0 = 0; /* This is really setting up word1 */
1788 to_slim = phba->MBslimaddr + sizeof (uint32_t);
1789 writel(*(uint32_t *) mb, to_slim);
1790 readl(to_slim); /* flush */
1792 lpfc_sli_brdreset(phba);
1793 phba->stopped = 0;
1794 phba->hba_state = LPFC_INIT_START;
1796 spin_unlock_irq(phba->host->host_lock);
1798 memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
1799 psli->stats_start = get_seconds();
1801 if (skip_post)
1802 mdelay(100);
1803 else
1804 mdelay(2000);
1806 lpfc_hba_down_post(phba);
1808 return 0;
1811 static int
1812 lpfc_sli_chipset_init(struct lpfc_hba *phba)
1814 uint32_t status, i = 0;
1816 /* Read the HBA Host Status Register */
1817 status = readl(phba->HSregaddr);
1819 /* Check status register to see what current state is */
1820 i = 0;
1821 while ((status & (HS_FFRDY | HS_MBRDY)) != (HS_FFRDY | HS_MBRDY)) {
1823 /* Check every 100ms for 5 retries, then every 500ms for 5, then
1824 * every 2.5 sec for 5, then reset board and every 2.5 sec for
1825 * 4.
1827 if (i++ >= 20) {
1828 /* Adapter failed to init, timeout, status reg
1829 <status> */
1830 lpfc_printf_log(phba,
1831 KERN_ERR,
1832 LOG_INIT,
1833 "%d:0436 Adapter failed to init, "
1834 "timeout, status reg x%x\n",
1835 phba->brd_no,
1836 status);
1837 phba->hba_state = LPFC_HBA_ERROR;
1838 return -ETIMEDOUT;
1841 /* Check to see if any errors occurred during init */
1842 if (status & HS_FFERM) {
1843 /* ERROR: During chipset initialization */
1844 /* Adapter failed to init, chipset, status reg
1845 <status> */
1846 lpfc_printf_log(phba,
1847 KERN_ERR,
1848 LOG_INIT,
1849 "%d:0437 Adapter failed to init, "
1850 "chipset, status reg x%x\n",
1851 phba->brd_no,
1852 status);
1853 phba->hba_state = LPFC_HBA_ERROR;
1854 return -EIO;
1857 if (i <= 5) {
1858 msleep(10);
1859 } else if (i <= 10) {
1860 msleep(500);
1861 } else {
1862 msleep(2500);
1865 if (i == 15) {
1866 phba->hba_state = LPFC_STATE_UNKNOWN; /* Do post */
1867 lpfc_sli_brdrestart(phba);
1869 /* Read the HBA Host Status Register */
1870 status = readl(phba->HSregaddr);
1873 /* Check to see if any errors occurred during init */
1874 if (status & HS_FFERM) {
1875 /* ERROR: During chipset initialization */
1876 /* Adapter failed to init, chipset, status reg <status> */
1877 lpfc_printf_log(phba,
1878 KERN_ERR,
1879 LOG_INIT,
1880 "%d:0438 Adapter failed to init, chipset, "
1881 "status reg x%x\n",
1882 phba->brd_no,
1883 status);
1884 phba->hba_state = LPFC_HBA_ERROR;
1885 return -EIO;
1888 /* Clear all interrupt enable conditions */
1889 writel(0, phba->HCregaddr);
1890 readl(phba->HCregaddr); /* flush */
1892 /* setup host attn register */
1893 writel(0xffffffff, phba->HAregaddr);
1894 readl(phba->HAregaddr); /* flush */
1895 return 0;
1899 lpfc_sli_hba_setup(struct lpfc_hba * phba)
1901 LPFC_MBOXQ_t *pmb;
1902 uint32_t resetcount = 0, rc = 0, done = 0;
1904 pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
1905 if (!pmb) {
1906 phba->hba_state = LPFC_HBA_ERROR;
1907 return -ENOMEM;
1910 while (resetcount < 2 && !done) {
1911 spin_lock_irq(phba->host->host_lock);
1912 phba->sli.sli_flag |= LPFC_SLI_MBOX_ACTIVE;
1913 spin_unlock_irq(phba->host->host_lock);
1914 phba->hba_state = LPFC_STATE_UNKNOWN;
1915 lpfc_sli_brdrestart(phba);
1916 msleep(2500);
1917 rc = lpfc_sli_chipset_init(phba);
1918 if (rc)
1919 break;
1921 spin_lock_irq(phba->host->host_lock);
1922 phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
1923 spin_unlock_irq(phba->host->host_lock);
1924 resetcount++;
1926 /* Call pre CONFIG_PORT mailbox command initialization. A value of 0
1927 * means the call was successful. Any other nonzero value is a failure,
1928 * but if ERESTART is returned, the driver may reset the HBA and try
1929 * again.
1931 rc = lpfc_config_port_prep(phba);
1932 if (rc == -ERESTART) {
1933 phba->hba_state = 0;
1934 continue;
1935 } else if (rc) {
1936 break;
1939 phba->hba_state = LPFC_INIT_MBX_CMDS;
1940 lpfc_config_port(phba, pmb);
1941 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
1942 if (rc == MBX_SUCCESS)
1943 done = 1;
1944 else {
1945 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
1946 "%d:0442 Adapter failed to init, mbxCmd x%x "
1947 "CONFIG_PORT, mbxStatus x%x Data: x%x\n",
1948 phba->brd_no, pmb->mb.mbxCommand,
1949 pmb->mb.mbxStatus, 0);
1950 phba->sli.sli_flag &= ~LPFC_SLI2_ACTIVE;
1953 if (!done)
1954 goto lpfc_sli_hba_setup_error;
1956 rc = lpfc_sli_ring_map(phba, pmb);
1958 if (rc)
1959 goto lpfc_sli_hba_setup_error;
1961 phba->sli.sli_flag |= LPFC_PROCESS_LA;
1963 rc = lpfc_config_port_post(phba);
1964 if (rc)
1965 goto lpfc_sli_hba_setup_error;
1967 goto lpfc_sli_hba_setup_exit;
1968 lpfc_sli_hba_setup_error:
1969 phba->hba_state = LPFC_HBA_ERROR;
1970 lpfc_sli_hba_setup_exit:
1971 mempool_free(pmb, phba->mbox_mem_pool);
1972 return rc;
1975 static void
1976 lpfc_mbox_abort(struct lpfc_hba * phba)
1978 LPFC_MBOXQ_t *pmbox;
1979 MAILBOX_t *mb;
1981 if (phba->sli.mbox_active) {
1982 del_timer_sync(&phba->sli.mbox_tmo);
1983 phba->work_hba_events &= ~WORKER_MBOX_TMO;
1984 pmbox = phba->sli.mbox_active;
1985 mb = &pmbox->mb;
1986 phba->sli.mbox_active = NULL;
1987 if (pmbox->mbox_cmpl) {
1988 mb->mbxStatus = MBX_NOT_FINISHED;
1989 (pmbox->mbox_cmpl) (phba, pmbox);
1991 phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
1994 /* Abort all the non active mailbox commands. */
1995 spin_lock_irq(phba->host->host_lock);
1996 pmbox = lpfc_mbox_get(phba);
1997 while (pmbox) {
1998 mb = &pmbox->mb;
1999 if (pmbox->mbox_cmpl) {
2000 mb->mbxStatus = MBX_NOT_FINISHED;
2001 spin_unlock_irq(phba->host->host_lock);
2002 (pmbox->mbox_cmpl) (phba, pmbox);
2003 spin_lock_irq(phba->host->host_lock);
2005 pmbox = lpfc_mbox_get(phba);
2007 spin_unlock_irq(phba->host->host_lock);
2008 return;
2011 /*! lpfc_mbox_timeout
2013 * \pre
2014 * \post
2015 * \param hba Pointer to per struct lpfc_hba structure
2016 * \param l1 Pointer to the driver's mailbox queue.
2017 * \return
2018 * void
2020 * \b Description:
2022 * This routine handles mailbox timeout events at timer interrupt context.
2024 void
2025 lpfc_mbox_timeout(unsigned long ptr)
2027 struct lpfc_hba *phba;
2028 unsigned long iflag;
2030 phba = (struct lpfc_hba *)ptr;
2031 spin_lock_irqsave(phba->host->host_lock, iflag);
2032 if (!(phba->work_hba_events & WORKER_MBOX_TMO)) {
2033 phba->work_hba_events |= WORKER_MBOX_TMO;
2034 if (phba->work_wait)
2035 wake_up(phba->work_wait);
2037 spin_unlock_irqrestore(phba->host->host_lock, iflag);
2040 void
2041 lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
2043 LPFC_MBOXQ_t *pmbox;
2044 MAILBOX_t *mb;
2046 spin_lock_irq(phba->host->host_lock);
2047 if (!(phba->work_hba_events & WORKER_MBOX_TMO)) {
2048 spin_unlock_irq(phba->host->host_lock);
2049 return;
2052 phba->work_hba_events &= ~WORKER_MBOX_TMO;
2054 pmbox = phba->sli.mbox_active;
2055 mb = &pmbox->mb;
2057 /* Mbox cmd <mbxCommand> timeout */
2058 lpfc_printf_log(phba,
2059 KERN_ERR,
2060 LOG_MBOX | LOG_SLI,
2061 "%d:0310 Mailbox command x%x timeout Data: x%x x%x x%p\n",
2062 phba->brd_no,
2063 mb->mbxCommand,
2064 phba->hba_state,
2065 phba->sli.sli_flag,
2066 phba->sli.mbox_active);
2068 phba->sli.mbox_active = NULL;
2069 if (pmbox->mbox_cmpl) {
2070 mb->mbxStatus = MBX_NOT_FINISHED;
2071 spin_unlock_irq(phba->host->host_lock);
2072 (pmbox->mbox_cmpl) (phba, pmbox);
2073 spin_lock_irq(phba->host->host_lock);
2075 phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
2077 spin_unlock_irq(phba->host->host_lock);
2078 lpfc_mbox_abort(phba);
2079 return;
2083 lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag)
2085 MAILBOX_t *mb;
2086 struct lpfc_sli *psli;
2087 uint32_t status, evtctr;
2088 uint32_t ha_copy;
2089 int i;
2090 unsigned long drvr_flag = 0;
2091 volatile uint32_t word0, ldata;
2092 void __iomem *to_slim;
2094 psli = &phba->sli;
2096 spin_lock_irqsave(phba->host->host_lock, drvr_flag);
2099 mb = &pmbox->mb;
2100 status = MBX_SUCCESS;
2102 if (phba->hba_state == LPFC_HBA_ERROR) {
2103 spin_unlock_irqrestore(phba->host->host_lock, drvr_flag);
2105 /* Mbox command <mbxCommand> cannot issue */
2106 LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag)
2107 return (MBX_NOT_FINISHED);
2110 if (mb->mbxCommand != MBX_KILL_BOARD && flag & MBX_NOWAIT &&
2111 !(readl(phba->HCregaddr) & HC_MBINT_ENA)) {
2112 spin_unlock_irqrestore(phba->host->host_lock, drvr_flag);
2113 LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag)
2114 return (MBX_NOT_FINISHED);
2117 if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
2118 /* Polling for a mbox command when another one is already active
2119 * is not allowed in SLI. Also, the driver must have established
2120 * SLI2 mode to queue and process multiple mbox commands.
2123 if (flag & MBX_POLL) {
2124 spin_unlock_irqrestore(phba->host->host_lock,
2125 drvr_flag);
2127 /* Mbox command <mbxCommand> cannot issue */
2128 LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag)
2129 return (MBX_NOT_FINISHED);
2132 if (!(psli->sli_flag & LPFC_SLI2_ACTIVE)) {
2133 spin_unlock_irqrestore(phba->host->host_lock,
2134 drvr_flag);
2135 /* Mbox command <mbxCommand> cannot issue */
2136 LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag)
2137 return (MBX_NOT_FINISHED);
2140 /* Handle STOP IOCB processing flag. This is only meaningful
2141 * if we are not polling for mbox completion.
2143 if (flag & MBX_STOP_IOCB) {
2144 flag &= ~MBX_STOP_IOCB;
2145 /* Now flag each ring */
2146 for (i = 0; i < psli->num_rings; i++) {
2147 /* If the ring is active, flag it */
2148 if (psli->ring[i].cmdringaddr) {
2149 psli->ring[i].flag |=
2150 LPFC_STOP_IOCB_MBX;
2155 /* Another mailbox command is still being processed, queue this
2156 * command to be processed later.
2158 lpfc_mbox_put(phba, pmbox);
2160 /* Mbox cmd issue - BUSY */
2161 lpfc_printf_log(phba,
2162 KERN_INFO,
2163 LOG_MBOX | LOG_SLI,
2164 "%d:0308 Mbox cmd issue - BUSY Data: x%x x%x x%x x%x\n",
2165 phba->brd_no,
2166 mb->mbxCommand,
2167 phba->hba_state,
2168 psli->sli_flag,
2169 flag);
2171 psli->slistat.mbox_busy++;
2172 spin_unlock_irqrestore(phba->host->host_lock,
2173 drvr_flag);
2175 return (MBX_BUSY);
2178 /* Handle STOP IOCB processing flag. This is only meaningful
2179 * if we are not polling for mbox completion.
2181 if (flag & MBX_STOP_IOCB) {
2182 flag &= ~MBX_STOP_IOCB;
2183 if (flag == MBX_NOWAIT) {
2184 /* Now flag each ring */
2185 for (i = 0; i < psli->num_rings; i++) {
2186 /* If the ring is active, flag it */
2187 if (psli->ring[i].cmdringaddr) {
2188 psli->ring[i].flag |=
2189 LPFC_STOP_IOCB_MBX;
2195 psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE;
2197 /* If we are not polling, we MUST be in SLI2 mode */
2198 if (flag != MBX_POLL) {
2199 if (!(psli->sli_flag & LPFC_SLI2_ACTIVE) &&
2200 (mb->mbxCommand != MBX_KILL_BOARD)) {
2201 psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
2202 spin_unlock_irqrestore(phba->host->host_lock,
2203 drvr_flag);
2204 /* Mbox command <mbxCommand> cannot issue */
2205 LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag);
2206 return (MBX_NOT_FINISHED);
2208 /* timeout active mbox command */
2209 mod_timer(&psli->mbox_tmo, (jiffies +
2210 (HZ * lpfc_mbox_tmo_val(phba, mb->mbxCommand))));
2213 /* Mailbox cmd <cmd> issue */
2214 lpfc_printf_log(phba,
2215 KERN_INFO,
2216 LOG_MBOX | LOG_SLI,
2217 "%d:0309 Mailbox cmd x%x issue Data: x%x x%x x%x\n",
2218 phba->brd_no,
2219 mb->mbxCommand,
2220 phba->hba_state,
2221 psli->sli_flag,
2222 flag);
2224 psli->slistat.mbox_cmd++;
2225 evtctr = psli->slistat.mbox_event;
2227 /* next set own bit for the adapter and copy over command word */
2228 mb->mbxOwner = OWN_CHIP;
2230 if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
2231 /* First copy command data to host SLIM area */
2232 lpfc_sli_pcimem_bcopy(mb, &phba->slim2p->mbx, MAILBOX_CMD_SIZE);
2233 } else {
2234 if (mb->mbxCommand == MBX_CONFIG_PORT) {
2235 /* copy command data into host mbox for cmpl */
2236 lpfc_sli_pcimem_bcopy(mb, &phba->slim2p->mbx,
2237 MAILBOX_CMD_SIZE);
2240 /* First copy mbox command data to HBA SLIM, skip past first
2241 word */
2242 to_slim = phba->MBslimaddr + sizeof (uint32_t);
2243 lpfc_memcpy_to_slim(to_slim, &mb->un.varWords[0],
2244 MAILBOX_CMD_SIZE - sizeof (uint32_t));
2246 /* Next copy over first word, with mbxOwner set */
2247 ldata = *((volatile uint32_t *)mb);
2248 to_slim = phba->MBslimaddr;
2249 writel(ldata, to_slim);
2250 readl(to_slim); /* flush */
2252 if (mb->mbxCommand == MBX_CONFIG_PORT) {
2253 /* switch over to host mailbox */
2254 psli->sli_flag |= LPFC_SLI2_ACTIVE;
2258 wmb();
2259 /* interrupt board to doit right away */
2260 writel(CA_MBATT, phba->CAregaddr);
2261 readl(phba->CAregaddr); /* flush */
2263 switch (flag) {
2264 case MBX_NOWAIT:
2265 /* Don't wait for it to finish, just return */
2266 psli->mbox_active = pmbox;
2267 break;
2269 case MBX_POLL:
2270 psli->mbox_active = NULL;
2271 if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
2272 /* First read mbox status word */
2273 word0 = *((volatile uint32_t *)&phba->slim2p->mbx);
2274 word0 = le32_to_cpu(word0);
2275 } else {
2276 /* First read mbox status word */
2277 word0 = readl(phba->MBslimaddr);
2280 /* Read the HBA Host Attention Register */
2281 ha_copy = readl(phba->HAregaddr);
2283 i = lpfc_mbox_tmo_val(phba, mb->mbxCommand);
2284 i *= 1000; /* Convert to ms */
2286 /* Wait for command to complete */
2287 while (((word0 & OWN_CHIP) == OWN_CHIP) ||
2288 (!(ha_copy & HA_MBATT) &&
2289 (phba->hba_state > LPFC_WARM_START))) {
2290 if (i-- <= 0) {
2291 psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
2292 spin_unlock_irqrestore(phba->host->host_lock,
2293 drvr_flag);
2294 return (MBX_NOT_FINISHED);
2297 /* Check if we took a mbox interrupt while we were
2298 polling */
2299 if (((word0 & OWN_CHIP) != OWN_CHIP)
2300 && (evtctr != psli->slistat.mbox_event))
2301 break;
2303 spin_unlock_irqrestore(phba->host->host_lock,
2304 drvr_flag);
2306 /* Can be in interrupt context, do not sleep */
2307 /* (or might be called with interrupts disabled) */
2308 mdelay(1);
2310 spin_lock_irqsave(phba->host->host_lock, drvr_flag);
2312 if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
2313 /* First copy command data */
2314 word0 = *((volatile uint32_t *)
2315 &phba->slim2p->mbx);
2316 word0 = le32_to_cpu(word0);
2317 if (mb->mbxCommand == MBX_CONFIG_PORT) {
2318 MAILBOX_t *slimmb;
2319 volatile uint32_t slimword0;
2320 /* Check real SLIM for any errors */
2321 slimword0 = readl(phba->MBslimaddr);
2322 slimmb = (MAILBOX_t *) & slimword0;
2323 if (((slimword0 & OWN_CHIP) != OWN_CHIP)
2324 && slimmb->mbxStatus) {
2325 psli->sli_flag &=
2326 ~LPFC_SLI2_ACTIVE;
2327 word0 = slimword0;
2330 } else {
2331 /* First copy command data */
2332 word0 = readl(phba->MBslimaddr);
2334 /* Read the HBA Host Attention Register */
2335 ha_copy = readl(phba->HAregaddr);
2338 if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
2339 /* copy results back to user */
2340 lpfc_sli_pcimem_bcopy(&phba->slim2p->mbx, mb,
2341 MAILBOX_CMD_SIZE);
2342 } else {
2343 /* First copy command data */
2344 lpfc_memcpy_from_slim(mb, phba->MBslimaddr,
2345 MAILBOX_CMD_SIZE);
2346 if ((mb->mbxCommand == MBX_DUMP_MEMORY) &&
2347 pmbox->context2) {
2348 lpfc_memcpy_from_slim((void *)pmbox->context2,
2349 phba->MBslimaddr + DMP_RSP_OFFSET,
2350 mb->un.varDmp.word_cnt);
2354 writel(HA_MBATT, phba->HAregaddr);
2355 readl(phba->HAregaddr); /* flush */
2357 psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
2358 status = mb->mbxStatus;
2361 spin_unlock_irqrestore(phba->host->host_lock, drvr_flag);
2362 return (status);
2365 static int
2366 lpfc_sli_ringtx_put(struct lpfc_hba * phba, struct lpfc_sli_ring * pring,
2367 struct lpfc_iocbq * piocb)
2369 /* Insert the caller's iocb in the txq tail for later processing. */
2370 list_add_tail(&piocb->list, &pring->txq);
2371 pring->txq_cnt++;
2372 return (0);
2375 static struct lpfc_iocbq *
2376 lpfc_sli_next_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
2377 struct lpfc_iocbq ** piocb)
2379 struct lpfc_iocbq * nextiocb;
2381 nextiocb = lpfc_sli_ringtx_get(phba, pring);
2382 if (!nextiocb) {
2383 nextiocb = *piocb;
2384 *piocb = NULL;
2387 return nextiocb;
2391 lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
2392 struct lpfc_iocbq *piocb, uint32_t flag)
2394 struct lpfc_iocbq *nextiocb;
2395 IOCB_t *iocb;
2398 * We should never get an IOCB if we are in a < LINK_DOWN state
2400 if (unlikely(phba->hba_state < LPFC_LINK_DOWN))
2401 return IOCB_ERROR;
2404 * Check to see if we are blocking IOCB processing because of a
2405 * outstanding mbox command.
2407 if (unlikely(pring->flag & LPFC_STOP_IOCB_MBX))
2408 goto iocb_busy;
2410 if (unlikely(phba->hba_state == LPFC_LINK_DOWN)) {
2412 * Only CREATE_XRI, CLOSE_XRI, ABORT_XRI, and QUE_RING_BUF
2413 * can be issued if the link is not up.
2415 switch (piocb->iocb.ulpCommand) {
2416 case CMD_QUE_RING_BUF_CN:
2417 case CMD_QUE_RING_BUF64_CN:
2419 * For IOCBs, like QUE_RING_BUF, that have no rsp ring
2420 * completion, iocb_cmpl MUST be 0.
2422 if (piocb->iocb_cmpl)
2423 piocb->iocb_cmpl = NULL;
2424 /*FALLTHROUGH*/
2425 case CMD_CREATE_XRI_CR:
2426 break;
2427 default:
2428 goto iocb_busy;
2432 * For FCP commands, we must be in a state where we can process link
2433 * attention events.
2435 } else if (unlikely(pring->ringno == phba->sli.fcp_ring &&
2436 !(phba->sli.sli_flag & LPFC_PROCESS_LA)))
2437 goto iocb_busy;
2439 while ((iocb = lpfc_sli_next_iocb_slot(phba, pring)) &&
2440 (nextiocb = lpfc_sli_next_iocb(phba, pring, &piocb)))
2441 lpfc_sli_submit_iocb(phba, pring, iocb, nextiocb);
2443 if (iocb)
2444 lpfc_sli_update_ring(phba, pring);
2445 else
2446 lpfc_sli_update_full_ring(phba, pring);
2448 if (!piocb)
2449 return IOCB_SUCCESS;
2451 goto out_busy;
2453 iocb_busy:
2454 pring->stats.iocb_cmd_delay++;
2456 out_busy:
2458 if (!(flag & SLI_IOCB_RET_IOCB)) {
2459 lpfc_sli_ringtx_put(phba, pring, piocb);
2460 return IOCB_SUCCESS;
2463 return IOCB_BUSY;
2466 static int
2467 lpfc_extra_ring_setup( struct lpfc_hba *phba)
2469 struct lpfc_sli *psli;
2470 struct lpfc_sli_ring *pring;
2472 psli = &phba->sli;
2474 /* Adjust cmd/rsp ring iocb entries more evenly */
2475 pring = &psli->ring[psli->fcp_ring];
2476 pring->numCiocb -= SLI2_IOCB_CMD_R1XTRA_ENTRIES;
2477 pring->numRiocb -= SLI2_IOCB_RSP_R1XTRA_ENTRIES;
2478 pring->numCiocb -= SLI2_IOCB_CMD_R3XTRA_ENTRIES;
2479 pring->numRiocb -= SLI2_IOCB_RSP_R3XTRA_ENTRIES;
2481 pring = &psli->ring[1];
2482 pring->numCiocb += SLI2_IOCB_CMD_R1XTRA_ENTRIES;
2483 pring->numRiocb += SLI2_IOCB_RSP_R1XTRA_ENTRIES;
2484 pring->numCiocb += SLI2_IOCB_CMD_R3XTRA_ENTRIES;
2485 pring->numRiocb += SLI2_IOCB_RSP_R3XTRA_ENTRIES;
2487 /* Setup default profile for this ring */
2488 pring->iotag_max = 4096;
2489 pring->num_mask = 1;
2490 pring->prt[0].profile = 0; /* Mask 0 */
2491 pring->prt[0].rctl = FC_UNSOL_DATA;
2492 pring->prt[0].type = 5;
2493 pring->prt[0].lpfc_sli_rcv_unsol_event = NULL;
2494 return 0;
2498 lpfc_sli_setup(struct lpfc_hba *phba)
2500 int i, totiocb = 0;
2501 struct lpfc_sli *psli = &phba->sli;
2502 struct lpfc_sli_ring *pring;
2504 psli->num_rings = MAX_CONFIGURED_RINGS;
2505 psli->sli_flag = 0;
2506 psli->fcp_ring = LPFC_FCP_RING;
2507 psli->next_ring = LPFC_FCP_NEXT_RING;
2508 psli->ip_ring = LPFC_IP_RING;
2510 psli->iocbq_lookup = NULL;
2511 psli->iocbq_lookup_len = 0;
2512 psli->last_iotag = 0;
2514 for (i = 0; i < psli->num_rings; i++) {
2515 pring = &psli->ring[i];
2516 switch (i) {
2517 case LPFC_FCP_RING: /* ring 0 - FCP */
2518 /* numCiocb and numRiocb are used in config_port */
2519 pring->numCiocb = SLI2_IOCB_CMD_R0_ENTRIES;
2520 pring->numRiocb = SLI2_IOCB_RSP_R0_ENTRIES;
2521 pring->numCiocb += SLI2_IOCB_CMD_R1XTRA_ENTRIES;
2522 pring->numRiocb += SLI2_IOCB_RSP_R1XTRA_ENTRIES;
2523 pring->numCiocb += SLI2_IOCB_CMD_R3XTRA_ENTRIES;
2524 pring->numRiocb += SLI2_IOCB_RSP_R3XTRA_ENTRIES;
2525 pring->iotag_ctr = 0;
2526 pring->iotag_max =
2527 (phba->cfg_hba_queue_depth * 2);
2528 pring->fast_iotag = pring->iotag_max;
2529 pring->num_mask = 0;
2530 break;
2531 case LPFC_IP_RING: /* ring 1 - IP */
2532 /* numCiocb and numRiocb are used in config_port */
2533 pring->numCiocb = SLI2_IOCB_CMD_R1_ENTRIES;
2534 pring->numRiocb = SLI2_IOCB_RSP_R1_ENTRIES;
2535 pring->num_mask = 0;
2536 break;
2537 case LPFC_ELS_RING: /* ring 2 - ELS / CT */
2538 /* numCiocb and numRiocb are used in config_port */
2539 pring->numCiocb = SLI2_IOCB_CMD_R2_ENTRIES;
2540 pring->numRiocb = SLI2_IOCB_RSP_R2_ENTRIES;
2541 pring->fast_iotag = 0;
2542 pring->iotag_ctr = 0;
2543 pring->iotag_max = 4096;
2544 pring->num_mask = 4;
2545 pring->prt[0].profile = 0; /* Mask 0 */
2546 pring->prt[0].rctl = FC_ELS_REQ;
2547 pring->prt[0].type = FC_ELS_DATA;
2548 pring->prt[0].lpfc_sli_rcv_unsol_event =
2549 lpfc_els_unsol_event;
2550 pring->prt[1].profile = 0; /* Mask 1 */
2551 pring->prt[1].rctl = FC_ELS_RSP;
2552 pring->prt[1].type = FC_ELS_DATA;
2553 pring->prt[1].lpfc_sli_rcv_unsol_event =
2554 lpfc_els_unsol_event;
2555 pring->prt[2].profile = 0; /* Mask 2 */
2556 /* NameServer Inquiry */
2557 pring->prt[2].rctl = FC_UNSOL_CTL;
2558 /* NameServer */
2559 pring->prt[2].type = FC_COMMON_TRANSPORT_ULP;
2560 pring->prt[2].lpfc_sli_rcv_unsol_event =
2561 lpfc_ct_unsol_event;
2562 pring->prt[3].profile = 0; /* Mask 3 */
2563 /* NameServer response */
2564 pring->prt[3].rctl = FC_SOL_CTL;
2565 /* NameServer */
2566 pring->prt[3].type = FC_COMMON_TRANSPORT_ULP;
2567 pring->prt[3].lpfc_sli_rcv_unsol_event =
2568 lpfc_ct_unsol_event;
2569 break;
2571 totiocb += (pring->numCiocb + pring->numRiocb);
2573 if (totiocb > MAX_SLI2_IOCB) {
2574 /* Too many cmd / rsp ring entries in SLI2 SLIM */
2575 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
2576 "%d:0462 Too many cmd / rsp ring entries in "
2577 "SLI2 SLIM Data: x%x x%x\n",
2578 phba->brd_no, totiocb, MAX_SLI2_IOCB);
2580 if (phba->cfg_multi_ring_support == 2)
2581 lpfc_extra_ring_setup(phba);
2583 return 0;
2587 lpfc_sli_queue_setup(struct lpfc_hba * phba)
2589 struct lpfc_sli *psli;
2590 struct lpfc_sli_ring *pring;
2591 int i;
2593 psli = &phba->sli;
2594 spin_lock_irq(phba->host->host_lock);
2595 INIT_LIST_HEAD(&psli->mboxq);
2596 /* Initialize list headers for txq and txcmplq as double linked lists */
2597 for (i = 0; i < psli->num_rings; i++) {
2598 pring = &psli->ring[i];
2599 pring->ringno = i;
2600 pring->next_cmdidx = 0;
2601 pring->local_getidx = 0;
2602 pring->cmdidx = 0;
2603 INIT_LIST_HEAD(&pring->txq);
2604 INIT_LIST_HEAD(&pring->txcmplq);
2605 INIT_LIST_HEAD(&pring->iocb_continueq);
2606 INIT_LIST_HEAD(&pring->postbufq);
2608 spin_unlock_irq(phba->host->host_lock);
2609 return (1);
2613 lpfc_sli_hba_down(struct lpfc_hba * phba)
2615 struct lpfc_sli *psli;
2616 struct lpfc_sli_ring *pring;
2617 LPFC_MBOXQ_t *pmb;
2618 struct lpfc_iocbq *iocb, *next_iocb;
2619 IOCB_t *icmd = NULL;
2620 int i;
2621 unsigned long flags = 0;
2623 psli = &phba->sli;
2624 lpfc_hba_down_prep(phba);
2626 spin_lock_irqsave(phba->host->host_lock, flags);
2628 for (i = 0; i < psli->num_rings; i++) {
2629 pring = &psli->ring[i];
2630 pring->flag |= LPFC_DEFERRED_RING_EVENT;
2633 * Error everything on the txq since these iocbs have not been
2634 * given to the FW yet.
2636 pring->txq_cnt = 0;
2638 list_for_each_entry_safe(iocb, next_iocb, &pring->txq, list) {
2639 list_del_init(&iocb->list);
2640 if (iocb->iocb_cmpl) {
2641 icmd = &iocb->iocb;
2642 icmd->ulpStatus = IOSTAT_LOCAL_REJECT;
2643 icmd->un.ulpWord[4] = IOERR_SLI_DOWN;
2644 spin_unlock_irqrestore(phba->host->host_lock,
2645 flags);
2646 (iocb->iocb_cmpl) (phba, iocb, iocb);
2647 spin_lock_irqsave(phba->host->host_lock, flags);
2648 } else
2649 lpfc_sli_release_iocbq(phba, iocb);
2652 INIT_LIST_HEAD(&(pring->txq));
2656 spin_unlock_irqrestore(phba->host->host_lock, flags);
2658 /* Return any active mbox cmds */
2659 del_timer_sync(&psli->mbox_tmo);
2660 spin_lock_irqsave(phba->host->host_lock, flags);
2661 phba->work_hba_events &= ~WORKER_MBOX_TMO;
2662 if (psli->mbox_active) {
2663 pmb = psli->mbox_active;
2664 pmb->mb.mbxStatus = MBX_NOT_FINISHED;
2665 if (pmb->mbox_cmpl) {
2666 spin_unlock_irqrestore(phba->host->host_lock, flags);
2667 pmb->mbox_cmpl(phba,pmb);
2668 spin_lock_irqsave(phba->host->host_lock, flags);
2671 psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
2672 psli->mbox_active = NULL;
2674 /* Return any pending mbox cmds */
2675 while ((pmb = lpfc_mbox_get(phba)) != NULL) {
2676 pmb->mb.mbxStatus = MBX_NOT_FINISHED;
2677 if (pmb->mbox_cmpl) {
2678 spin_unlock_irqrestore(phba->host->host_lock, flags);
2679 pmb->mbox_cmpl(phba,pmb);
2680 spin_lock_irqsave(phba->host->host_lock, flags);
2684 INIT_LIST_HEAD(&psli->mboxq);
2686 spin_unlock_irqrestore(phba->host->host_lock, flags);
2688 return 1;
2691 void
2692 lpfc_sli_pcimem_bcopy(void *srcp, void *destp, uint32_t cnt)
2694 uint32_t *src = srcp;
2695 uint32_t *dest = destp;
2696 uint32_t ldata;
2697 int i;
2699 for (i = 0; i < (int)cnt; i += sizeof (uint32_t)) {
2700 ldata = *src;
2701 ldata = le32_to_cpu(ldata);
2702 *dest = ldata;
2703 src++;
2704 dest++;
2709 lpfc_sli_ringpostbuf_put(struct lpfc_hba * phba, struct lpfc_sli_ring * pring,
2710 struct lpfc_dmabuf * mp)
2712 /* Stick struct lpfc_dmabuf at end of postbufq so driver can look it up
2713 later */
2714 list_add_tail(&mp->list, &pring->postbufq);
2716 pring->postbufq_cnt++;
2717 return 0;
2721 struct lpfc_dmabuf *
2722 lpfc_sli_ringpostbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
2723 dma_addr_t phys)
2725 struct lpfc_dmabuf *mp, *next_mp;
2726 struct list_head *slp = &pring->postbufq;
2728 /* Search postbufq, from the begining, looking for a match on phys */
2729 list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
2730 if (mp->phys == phys) {
2731 list_del_init(&mp->list);
2732 pring->postbufq_cnt--;
2733 return mp;
2737 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
2738 "%d:0410 Cannot find virtual addr for mapped buf on "
2739 "ring %d Data x%llx x%p x%p x%x\n",
2740 phba->brd_no, pring->ringno, (unsigned long long)phys,
2741 slp->next, slp->prev, pring->postbufq_cnt);
2742 return NULL;
2745 static void
2746 lpfc_sli_abort_elsreq_cmpl(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
2747 struct lpfc_iocbq * rspiocb)
2749 struct lpfc_dmabuf *buf_ptr, *buf_ptr1;
2750 /* Free the resources associated with the ELS_REQUEST64 IOCB the driver
2751 * just aborted.
2752 * In this case, context2 = cmd, context2->next = rsp, context3 = bpl
2754 if (cmdiocb->context2) {
2755 buf_ptr1 = (struct lpfc_dmabuf *) cmdiocb->context2;
2757 /* Free the response IOCB before completing the abort
2758 command. */
2759 buf_ptr = NULL;
2760 list_remove_head((&buf_ptr1->list), buf_ptr,
2761 struct lpfc_dmabuf, list);
2762 if (buf_ptr) {
2763 lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
2764 kfree(buf_ptr);
2766 lpfc_mbuf_free(phba, buf_ptr1->virt, buf_ptr1->phys);
2767 kfree(buf_ptr1);
2770 if (cmdiocb->context3) {
2771 buf_ptr = (struct lpfc_dmabuf *) cmdiocb->context3;
2772 lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
2773 kfree(buf_ptr);
2776 lpfc_sli_release_iocbq(phba, cmdiocb);
2777 return;
2781 lpfc_sli_issue_abort_iotag32(struct lpfc_hba * phba,
2782 struct lpfc_sli_ring * pring,
2783 struct lpfc_iocbq * cmdiocb)
2785 struct lpfc_iocbq *abtsiocbp;
2786 IOCB_t *icmd = NULL;
2787 IOCB_t *iabt = NULL;
2789 /* issue ABTS for this IOCB based on iotag */
2790 abtsiocbp = lpfc_sli_get_iocbq(phba);
2791 if (abtsiocbp == NULL)
2792 return 0;
2794 iabt = &abtsiocbp->iocb;
2795 icmd = &cmdiocb->iocb;
2796 switch (icmd->ulpCommand) {
2797 case CMD_ELS_REQUEST64_CR:
2798 /* Even though we abort the ELS command, the firmware may access
2799 * the BPL or other resources before it processes our
2800 * ABORT_MXRI64. Thus we must delay reusing the cmdiocb
2801 * resources till the actual abort request completes.
2803 abtsiocbp->context1 = (void *)((unsigned long)icmd->ulpCommand);
2804 abtsiocbp->context2 = cmdiocb->context2;
2805 abtsiocbp->context3 = cmdiocb->context3;
2806 cmdiocb->context2 = NULL;
2807 cmdiocb->context3 = NULL;
2808 abtsiocbp->iocb_cmpl = lpfc_sli_abort_elsreq_cmpl;
2809 break;
2810 default:
2811 lpfc_sli_release_iocbq(phba, abtsiocbp);
2812 return 0;
2815 iabt->un.amxri.abortType = ABORT_TYPE_ABTS;
2816 iabt->un.amxri.iotag32 = icmd->un.elsreq64.bdl.ulpIoTag32;
2818 iabt->ulpLe = 1;
2819 iabt->ulpClass = CLASS3;
2820 iabt->ulpCommand = CMD_ABORT_MXRI64_CN;
2822 if (lpfc_sli_issue_iocb(phba, pring, abtsiocbp, 0) == IOCB_ERROR) {
2823 lpfc_sli_release_iocbq(phba, abtsiocbp);
2824 return 0;
2827 return 1;
2830 static int
2831 lpfc_sli_validate_fcp_iocb(struct lpfc_iocbq *iocbq, uint16_t tgt_id,
2832 uint64_t lun_id, uint32_t ctx,
2833 lpfc_ctx_cmd ctx_cmd)
2835 struct lpfc_scsi_buf *lpfc_cmd;
2836 struct scsi_cmnd *cmnd;
2837 int rc = 1;
2839 if (!(iocbq->iocb_flag & LPFC_IO_FCP))
2840 return rc;
2842 lpfc_cmd = container_of(iocbq, struct lpfc_scsi_buf, cur_iocbq);
2843 cmnd = lpfc_cmd->pCmd;
2845 if (cmnd == NULL)
2846 return rc;
2848 switch (ctx_cmd) {
2849 case LPFC_CTX_LUN:
2850 if ((cmnd->device->id == tgt_id) &&
2851 (cmnd->device->lun == lun_id))
2852 rc = 0;
2853 break;
2854 case LPFC_CTX_TGT:
2855 if (cmnd->device->id == tgt_id)
2856 rc = 0;
2857 break;
2858 case LPFC_CTX_CTX:
2859 if (iocbq->iocb.ulpContext == ctx)
2860 rc = 0;
2861 break;
2862 case LPFC_CTX_HOST:
2863 rc = 0;
2864 break;
2865 default:
2866 printk(KERN_ERR "%s: Unknown context cmd type, value %d\n",
2867 __FUNCTION__, ctx_cmd);
2868 break;
2871 return rc;
2875 lpfc_sli_sum_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
2876 uint16_t tgt_id, uint64_t lun_id, lpfc_ctx_cmd ctx_cmd)
2878 struct lpfc_iocbq *iocbq;
2879 int sum, i;
2881 for (i = 1, sum = 0; i <= phba->sli.last_iotag; i++) {
2882 iocbq = phba->sli.iocbq_lookup[i];
2884 if (lpfc_sli_validate_fcp_iocb (iocbq, tgt_id, lun_id,
2885 0, ctx_cmd) == 0)
2886 sum++;
2889 return sum;
2892 void
2893 lpfc_sli_abort_fcp_cmpl(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
2894 struct lpfc_iocbq * rspiocb)
2896 spin_lock_irq(phba->host->host_lock);
2897 lpfc_sli_release_iocbq(phba, cmdiocb);
2898 spin_unlock_irq(phba->host->host_lock);
2899 return;
2903 lpfc_sli_abort_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
2904 uint16_t tgt_id, uint64_t lun_id, uint32_t ctx,
2905 lpfc_ctx_cmd abort_cmd)
2907 struct lpfc_iocbq *iocbq;
2908 struct lpfc_iocbq *abtsiocb;
2909 IOCB_t *cmd = NULL;
2910 int errcnt = 0, ret_val = 0;
2911 int i;
2913 for (i = 1; i <= phba->sli.last_iotag; i++) {
2914 iocbq = phba->sli.iocbq_lookup[i];
2916 if (lpfc_sli_validate_fcp_iocb (iocbq, tgt_id, lun_id,
2917 0, abort_cmd) != 0)
2918 continue;
2920 /* issue ABTS for this IOCB based on iotag */
2921 abtsiocb = lpfc_sli_get_iocbq(phba);
2922 if (abtsiocb == NULL) {
2923 errcnt++;
2924 continue;
2927 cmd = &iocbq->iocb;
2928 abtsiocb->iocb.un.acxri.abortType = ABORT_TYPE_ABTS;
2929 abtsiocb->iocb.un.acxri.abortContextTag = cmd->ulpContext;
2930 abtsiocb->iocb.un.acxri.abortIoTag = cmd->ulpIoTag;
2931 abtsiocb->iocb.ulpLe = 1;
2932 abtsiocb->iocb.ulpClass = cmd->ulpClass;
2934 if (phba->hba_state >= LPFC_LINK_UP)
2935 abtsiocb->iocb.ulpCommand = CMD_ABORT_XRI_CN;
2936 else
2937 abtsiocb->iocb.ulpCommand = CMD_CLOSE_XRI_CN;
2939 /* Setup callback routine and issue the command. */
2940 abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
2941 ret_val = lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0);
2942 if (ret_val == IOCB_ERROR) {
2943 lpfc_sli_release_iocbq(phba, abtsiocb);
2944 errcnt++;
2945 continue;
2949 return errcnt;
2952 static void
2953 lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba,
2954 struct lpfc_iocbq *cmdiocbq,
2955 struct lpfc_iocbq *rspiocbq)
2957 wait_queue_head_t *pdone_q;
2958 unsigned long iflags;
2960 spin_lock_irqsave(phba->host->host_lock, iflags);
2961 cmdiocbq->iocb_flag |= LPFC_IO_WAKE;
2962 if (cmdiocbq->context2 && rspiocbq)
2963 memcpy(&((struct lpfc_iocbq *)cmdiocbq->context2)->iocb,
2964 &rspiocbq->iocb, sizeof(IOCB_t));
2966 pdone_q = cmdiocbq->context_un.wait_queue;
2967 spin_unlock_irqrestore(phba->host->host_lock, iflags);
2968 if (pdone_q)
2969 wake_up(pdone_q);
2970 return;
2974 * Issue the caller's iocb and wait for its completion, but no longer than the
2975 * caller's timeout. Note that iocb_flags is cleared before the
2976 * lpfc_sli_issue_call since the wake routine sets a unique value and by
2977 * definition this is a wait function.
2980 lpfc_sli_issue_iocb_wait(struct lpfc_hba * phba,
2981 struct lpfc_sli_ring * pring,
2982 struct lpfc_iocbq * piocb,
2983 struct lpfc_iocbq * prspiocbq,
2984 uint32_t timeout)
2986 DECLARE_WAIT_QUEUE_HEAD(done_q);
2987 long timeleft, timeout_req = 0;
2988 int retval = IOCB_SUCCESS;
2989 uint32_t creg_val;
2992 * If the caller has provided a response iocbq buffer, then context2
2993 * is NULL or its an error.
2995 if (prspiocbq) {
2996 if (piocb->context2)
2997 return IOCB_ERROR;
2998 piocb->context2 = prspiocbq;
3001 piocb->iocb_cmpl = lpfc_sli_wake_iocb_wait;
3002 piocb->context_un.wait_queue = &done_q;
3003 piocb->iocb_flag &= ~LPFC_IO_WAKE;
3005 if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
3006 creg_val = readl(phba->HCregaddr);
3007 creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING);
3008 writel(creg_val, phba->HCregaddr);
3009 readl(phba->HCregaddr); /* flush */
3012 retval = lpfc_sli_issue_iocb(phba, pring, piocb, 0);
3013 if (retval == IOCB_SUCCESS) {
3014 timeout_req = timeout * HZ;
3015 spin_unlock_irq(phba->host->host_lock);
3016 timeleft = wait_event_timeout(done_q,
3017 piocb->iocb_flag & LPFC_IO_WAKE,
3018 timeout_req);
3019 spin_lock_irq(phba->host->host_lock);
3021 if (timeleft == 0) {
3022 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
3023 "%d:0338 IOCB wait timeout error - no "
3024 "wake response Data x%x\n",
3025 phba->brd_no, timeout);
3026 retval = IOCB_TIMEDOUT;
3027 } else if (!(piocb->iocb_flag & LPFC_IO_WAKE)) {
3028 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
3029 "%d:0330 IOCB wake NOT set, "
3030 "Data x%x x%lx\n", phba->brd_no,
3031 timeout, (timeleft / jiffies));
3032 retval = IOCB_TIMEDOUT;
3033 } else {
3034 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
3035 "%d:0331 IOCB wake signaled\n",
3036 phba->brd_no);
3038 } else {
3039 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
3040 "%d:0332 IOCB wait issue failed, Data x%x\n",
3041 phba->brd_no, retval);
3042 retval = IOCB_ERROR;
3045 if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
3046 creg_val = readl(phba->HCregaddr);
3047 creg_val &= ~(HC_R0INT_ENA << LPFC_FCP_RING);
3048 writel(creg_val, phba->HCregaddr);
3049 readl(phba->HCregaddr); /* flush */
3052 if (prspiocbq)
3053 piocb->context2 = NULL;
3055 piocb->context_un.wait_queue = NULL;
3056 piocb->iocb_cmpl = NULL;
3057 return retval;
3061 lpfc_sli_issue_mbox_wait(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq,
3062 uint32_t timeout)
3064 DECLARE_WAIT_QUEUE_HEAD(done_q);
3065 DECLARE_WAITQUEUE(wq_entry, current);
3066 uint32_t timeleft = 0;
3067 int retval;
3069 /* The caller must leave context1 empty. */
3070 if (pmboxq->context1 != 0) {
3071 return (MBX_NOT_FINISHED);
3074 /* setup wake call as IOCB callback */
3075 pmboxq->mbox_cmpl = lpfc_sli_wake_mbox_wait;
3076 /* setup context field to pass wait_queue pointer to wake function */
3077 pmboxq->context1 = &done_q;
3079 /* start to sleep before we wait, to avoid races */
3080 set_current_state(TASK_INTERRUPTIBLE);
3081 add_wait_queue(&done_q, &wq_entry);
3083 /* now issue the command */
3084 retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
3086 if (retval == MBX_BUSY || retval == MBX_SUCCESS) {
3087 timeleft = schedule_timeout(timeout * HZ);
3088 pmboxq->context1 = NULL;
3089 /* if schedule_timeout returns 0, we timed out and were not
3090 woken up */
3091 if ((timeleft == 0) || signal_pending(current))
3092 retval = MBX_TIMEOUT;
3093 else
3094 retval = MBX_SUCCESS;
3098 set_current_state(TASK_RUNNING);
3099 remove_wait_queue(&done_q, &wq_entry);
3100 return retval;
3104 lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba)
3106 int i = 0;
3108 while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE && !phba->stopped) {
3109 if (i++ > LPFC_MBOX_TMO * 1000)
3110 return 1;
3112 if (lpfc_sli_handle_mb_event(phba) == 0)
3113 i = 0;
3115 msleep(1);
3118 return (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) ? 1 : 0;
3121 irqreturn_t
3122 lpfc_intr_handler(int irq, void *dev_id, struct pt_regs * regs)
3124 struct lpfc_hba *phba;
3125 uint32_t ha_copy;
3126 uint32_t work_ha_copy;
3127 unsigned long status;
3128 int i;
3129 uint32_t control;
3132 * Get the driver's phba structure from the dev_id and
3133 * assume the HBA is not interrupting.
3135 phba = (struct lpfc_hba *) dev_id;
3137 if (unlikely(!phba))
3138 return IRQ_NONE;
3140 phba->sli.slistat.sli_intr++;
3143 * Call the HBA to see if it is interrupting. If not, don't claim
3144 * the interrupt
3147 /* Ignore all interrupts during initialization. */
3148 if (unlikely(phba->hba_state < LPFC_LINK_DOWN))
3149 return IRQ_NONE;
3152 * Read host attention register to determine interrupt source
3153 * Clear Attention Sources, except Error Attention (to
3154 * preserve status) and Link Attention
3156 spin_lock(phba->host->host_lock);
3157 ha_copy = readl(phba->HAregaddr);
3158 writel((ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr);
3159 readl(phba->HAregaddr); /* flush */
3160 spin_unlock(phba->host->host_lock);
3162 if (unlikely(!ha_copy))
3163 return IRQ_NONE;
3165 work_ha_copy = ha_copy & phba->work_ha_mask;
3167 if (unlikely(work_ha_copy)) {
3168 if (work_ha_copy & HA_LATT) {
3169 if (phba->sli.sli_flag & LPFC_PROCESS_LA) {
3171 * Turn off Link Attention interrupts
3172 * until CLEAR_LA done
3174 spin_lock(phba->host->host_lock);
3175 phba->sli.sli_flag &= ~LPFC_PROCESS_LA;
3176 control = readl(phba->HCregaddr);
3177 control &= ~HC_LAINT_ENA;
3178 writel(control, phba->HCregaddr);
3179 readl(phba->HCregaddr); /* flush */
3180 spin_unlock(phba->host->host_lock);
3182 else
3183 work_ha_copy &= ~HA_LATT;
3186 if (work_ha_copy & ~(HA_ERATT|HA_MBATT|HA_LATT)) {
3187 for (i = 0; i < phba->sli.num_rings; i++) {
3188 if (work_ha_copy & (HA_RXATT << (4*i))) {
3190 * Turn off Slow Rings interrupts
3192 spin_lock(phba->host->host_lock);
3193 control = readl(phba->HCregaddr);
3194 control &= ~(HC_R0INT_ENA << i);
3195 writel(control, phba->HCregaddr);
3196 readl(phba->HCregaddr); /* flush */
3197 spin_unlock(phba->host->host_lock);
3202 if (work_ha_copy & HA_ERATT) {
3203 phba->hba_state = LPFC_HBA_ERROR;
3205 * There was a link/board error. Read the
3206 * status register to retrieve the error event
3207 * and process it.
3209 phba->sli.slistat.err_attn_event++;
3210 /* Save status info */
3211 phba->work_hs = readl(phba->HSregaddr);
3212 phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
3213 phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
3215 /* Clear Chip error bit */
3216 writel(HA_ERATT, phba->HAregaddr);
3217 readl(phba->HAregaddr); /* flush */
3218 phba->stopped = 1;
3221 spin_lock(phba->host->host_lock);
3222 phba->work_ha |= work_ha_copy;
3223 if (phba->work_wait)
3224 wake_up(phba->work_wait);
3225 spin_unlock(phba->host->host_lock);
3228 ha_copy &= ~(phba->work_ha_mask);
3231 * Process all events on FCP ring. Take the optimized path for
3232 * FCP IO. Any other IO is slow path and is handled by
3233 * the worker thread.
3235 status = (ha_copy & (HA_RXMASK << (4*LPFC_FCP_RING)));
3236 status >>= (4*LPFC_FCP_RING);
3237 if (status & HA_RXATT)
3238 lpfc_sli_handle_fast_ring_event(phba,
3239 &phba->sli.ring[LPFC_FCP_RING],
3240 status);
3241 return IRQ_HANDLED;
3243 } /* lpfc_intr_handler */