2 * drivers/pcmcia/sa1100_assabet.c
4 * PCMCIA implementation routines for Assabet
7 #include <linux/module.h>
8 #include <linux/kernel.h>
9 #include <linux/errno.h>
10 #include <linux/interrupt.h>
11 #include <linux/device.h>
12 #include <linux/init.h>
14 #include <mach/hardware.h>
15 #include <asm/mach-types.h>
17 #include <asm/signal.h>
18 #include <mach/assabet.h>
20 #include "sa1100_generic.h"
22 static struct pcmcia_irqs irqs
[] = {
23 { 1, ASSABET_IRQ_GPIO_CF_CD
, "CF CD" },
24 { 1, ASSABET_IRQ_GPIO_CF_BVD2
, "CF BVD2" },
25 { 1, ASSABET_IRQ_GPIO_CF_BVD1
, "CF BVD1" },
28 static int assabet_pcmcia_hw_init(struct soc_pcmcia_socket
*skt
)
30 skt
->socket
.pci_irq
= ASSABET_IRQ_GPIO_CF_IRQ
;
32 return soc_pcmcia_request_irqs(skt
, irqs
, ARRAY_SIZE(irqs
));
36 * Release all resources.
38 static void assabet_pcmcia_hw_shutdown(struct soc_pcmcia_socket
*skt
)
40 soc_pcmcia_free_irqs(skt
, irqs
, ARRAY_SIZE(irqs
));
44 assabet_pcmcia_socket_state(struct soc_pcmcia_socket
*skt
, struct pcmcia_state
*state
)
46 unsigned long levels
= GPLR
;
48 state
->detect
= (levels
& ASSABET_GPIO_CF_CD
) ? 0 : 1;
49 state
->ready
= (levels
& ASSABET_GPIO_CF_IRQ
) ? 1 : 0;
50 state
->bvd1
= (levels
& ASSABET_GPIO_CF_BVD1
) ? 1 : 0;
51 state
->bvd2
= (levels
& ASSABET_GPIO_CF_BVD2
) ? 1 : 0;
52 state
->wrprot
= 0; /* Not available on Assabet. */
53 state
->vs_3v
= 1; /* Can only apply 3.3V on Assabet. */
58 assabet_pcmcia_configure_socket(struct soc_pcmcia_socket
*skt
, const socket_state_t
*state
)
68 printk(KERN_WARNING
"%s(): CS asked for 5V, applying 3.3V...\n",
71 case 33: /* Can only apply 3.3V to the CF slot. */
72 mask
= ASSABET_BCR_CF_PWR
;
76 printk(KERN_ERR
"%s(): unrecognized Vcc %u\n", __func__
,
81 /* Silently ignore Vpp, output enable, speaker enable. */
83 if (state
->flags
& SS_RESET
)
84 mask
|= ASSABET_BCR_CF_RST
;
86 ASSABET_BCR_frob(ASSABET_BCR_CF_RST
| ASSABET_BCR_CF_PWR
, mask
);
92 * Enable card status IRQs on (re-)initialisation. This can
93 * be called at initialisation, power management event, or
96 static void assabet_pcmcia_socket_init(struct soc_pcmcia_socket
*skt
)
101 ASSABET_BCR_clear(ASSABET_BCR_CF_BUS_OFF
);
103 soc_pcmcia_enable_irqs(skt
, irqs
, ARRAY_SIZE(irqs
));
107 * Disable card status IRQs on suspend.
109 static void assabet_pcmcia_socket_suspend(struct soc_pcmcia_socket
*skt
)
111 soc_pcmcia_disable_irqs(skt
, irqs
, ARRAY_SIZE(irqs
));
114 * Tristate the CF bus signals. Also assert CF
115 * reset as per user guide page 4-11.
117 ASSABET_BCR_set(ASSABET_BCR_CF_BUS_OFF
| ASSABET_BCR_CF_RST
);
120 static struct pcmcia_low_level assabet_pcmcia_ops
= {
121 .owner
= THIS_MODULE
,
123 .hw_init
= assabet_pcmcia_hw_init
,
124 .hw_shutdown
= assabet_pcmcia_hw_shutdown
,
126 .socket_state
= assabet_pcmcia_socket_state
,
127 .configure_socket
= assabet_pcmcia_configure_socket
,
129 .socket_init
= assabet_pcmcia_socket_init
,
130 .socket_suspend
= assabet_pcmcia_socket_suspend
,
133 int __devinit
pcmcia_assabet_init(struct device
*dev
)
137 if (machine_is_assabet() && !machine_has_neponset())
138 ret
= sa11xx_drv_pcmcia_probe(dev
, &assabet_pcmcia_ops
, 1, 1);