drivers/net/wireless/rt2x00/rt2x00.h

   1 /*
   2         Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
   3         <http://rt2x00.serialmonkey.com>
   4
   5         This program is free software; you can redistribute it and/or modify
   6         it under the terms of the GNU General Public License as published by
   7         the Free Software Foundation; either version 2 of the License, or
   8         (at your option) any later version.
   9
  10         This program is distributed in the hope that it will be useful,
  11         but WITHOUT ANY WARRANTY; without even the implied warranty of
  12         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13         GNU General Public License for more details.
  14
  15         You should have received a copy of the GNU General Public License
  16         along with this program; if not, write to the
  17         Free Software Foundation, Inc.,
  18         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  19  */
  20
  21 /*
  22         Module: rt2x00
  23         Abstract: rt2x00 global information.
  24  */
  25
  26 #ifndef RT2X00_H
  27 #define RT2X00_H
  28
  29 #include <linux/bitops.h>
  30 #include <linux/skbuff.h>
  31 #include <linux/workqueue.h>
  32 #include <linux/firmware.h>
  33 #include <linux/leds.h>
  34 #include <linux/mutex.h>
  35 #include <linux/etherdevice.h>
  36 #include <linux/input-polldev.h>
  37
  38 #include <net/mac80211.h>
  39
  40 #include "rt2x00debug.h"
  41 #include "rt2x00leds.h"
  42 #include "rt2x00reg.h"
  43 #include "rt2x00queue.h"
  44
  45 /*
  46  * Module information.
  47  */
  48 #define DRV_VERSION     "2.3.0"
  49 #define DRV_PROJECT     "http://rt2x00.serialmonkey.com"
  50
  51 /*
  52  * Debug definitions.
  53  * Debug output has to be enabled during compile time.
  54  */
  55 #define DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, __args...)     \
  56         printk(__kernlvl "%s -> %s: %s - " __msg,                       \
  57                wiphy_name((__dev)->hw->wiphy), __func__, __lvl, ##__args)
  58
  59 #define DEBUG_PRINTK_PROBE(__kernlvl, __lvl, __msg, __args...)  \
  60         printk(__kernlvl "%s -> %s: %s - " __msg,               \
  61                KBUILD_MODNAME, __func__, __lvl, ##__args)
  62
  63 #ifdef CONFIG_RT2X00_DEBUG
  64 #define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...) \
  65         DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, ##__args);
  66 #else
  67 #define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...) \
  68         do { } while (0)
  69 #endif /* CONFIG_RT2X00_DEBUG */
  70
  71 /*
  72  * Various debug levels.
  73  * The debug levels PANIC and ERROR both indicate serious problems,
  74  * for this reason they should never be ignored.
  75  * The special ERROR_PROBE message is for messages that are generated
  76  * when the rt2x00_dev is not yet initialized.
  77  */
  78 #define PANIC(__dev, __msg, __args...) \
  79         DEBUG_PRINTK_MSG(__dev, KERN_CRIT, "Panic", __msg, ##__args)
  80 #define ERROR(__dev, __msg, __args...)  \
  81         DEBUG_PRINTK_MSG(__dev, KERN_ERR, "Error", __msg, ##__args)
  82 #define ERROR_PROBE(__msg, __args...) \
  83         DEBUG_PRINTK_PROBE(KERN_ERR, "Error", __msg, ##__args)
  84 #define WARNING(__dev, __msg, __args...) \
  85         DEBUG_PRINTK(__dev, KERN_WARNING, "Warning", __msg, ##__args)
  86 #define NOTICE(__dev, __msg, __args...) \
  87         DEBUG_PRINTK(__dev, KERN_NOTICE, "Notice", __msg, ##__args)
  88 #define INFO(__dev, __msg, __args...) \
  89         DEBUG_PRINTK(__dev, KERN_INFO, "Info", __msg, ##__args)
  90 #define DEBUG(__dev, __msg, __args...) \
  91         DEBUG_PRINTK(__dev, KERN_DEBUG, "Debug", __msg, ##__args)
  92 #define EEPROM(__dev, __msg, __args...) \
  93         DEBUG_PRINTK(__dev, KERN_DEBUG, "EEPROM recovery", __msg, ##__args)
  94
  95 /*
  96  * Duration calculations
  97  * The rate variable passed is: 100kbs.
  98  * To convert from bytes to bits we multiply size with 8,
  99  * then the size is multiplied with 10 to make the
 100  * real rate -> rate argument correction.
 101  */
 102 #define GET_DURATION(__size, __rate)    (((__size) * 8 * 10) / (__rate))
 103 #define GET_DURATION_RES(__size, __rate)(((__size) * 8 * 10) % (__rate))
 104
 105 /*
 106  * Standard timing and size defines.
 107  * These values should follow the ieee80211 specifications.
 108  */
 109 #define ACK_SIZE                14
 110 #define IEEE80211_HEADER        24
 111 #define PLCP                    48
 112 #define BEACON                  100
 113 #define PREAMBLE                144
 114 #define SHORT_PREAMBLE          72
 115 #define SLOT_TIME               20
 116 #define SHORT_SLOT_TIME         9
 117 #define SIFS                    10
 118 #define PIFS                    ( SIFS + SLOT_TIME )
 119 #define SHORT_PIFS              ( SIFS + SHORT_SLOT_TIME )
 120 #define DIFS                    ( PIFS + SLOT_TIME )
 121 #define SHORT_DIFS              ( SHORT_PIFS + SHORT_SLOT_TIME )
 122 #define EIFS                    ( SIFS + DIFS + \
 123                                   GET_DURATION(IEEE80211_HEADER + ACK_SIZE, 10) )
 124 #define SHORT_EIFS              ( SIFS + SHORT_DIFS + \
 125                                   GET_DURATION(IEEE80211_HEADER + ACK_SIZE, 10) )
 126
 127 /*
 128  * Chipset identification
 129  * The chipset on the device is composed of a RT and RF chip.
 130  * The chipset combination is important for determining device capabilities.
 131  */
 132 struct rt2x00_chip {
 133         u16 rt;
 134 #define RT2460          0x0101
 135 #define RT2560          0x0201
 136 #define RT2570          0x1201
 137 #define RT2561s         0x0301  /* Turbo */
 138 #define RT2561          0x0302
 139 #define RT2661          0x0401
 140 #define RT2571          0x1300
 141
 142         u16 rf;
 143         u32 rev;
 144 };
 145
 146 /*
 147  * RF register values that belong to a particular channel.
 148  */
 149 struct rf_channel {
 150         int channel;
 151         u32 rf1;
 152         u32 rf2;
 153         u32 rf3;
 154         u32 rf4;
 155 };
 156
 157 /*
 158  * Channel information structure
 159  */
 160 struct channel_info {
 161         unsigned int flags;
 162 #define GEOGRAPHY_ALLOWED       0x00000001
 163
 164         short tx_power1;
 165         short tx_power2;
 166 };
 167
 168 /*
 169  * Antenna setup values.
 170  */
 171 struct antenna_setup {
 172         enum antenna rx;
 173         enum antenna tx;
 174 };
 175
 176 /*
 177  * Quality statistics about the currently active link.
 178  */
 179 struct link_qual {
 180         /*
 181          * Statistics required for Link tuning by driver
 182          * The rssi value is provided by rt2x00lib during the
 183          * link_tuner() callback function.
 184          * The false_cca field is filled during the link_stats()
 185          * callback function and could be used during the
 186          * link_tuner() callback function.
 187          */
 188         int rssi;
 189         int false_cca;
 190
 191         /*
 192          * VGC levels
 193          * Hardware driver will tune the VGC level during each call
 194          * to the link_tuner() callback function. This vgc_level is
 195          * is determined based on the link quality statistics like
 196          * average RSSI and the false CCA count.
 197          *
 198          * In some cases the drivers need to differentiate between
 199          * the currently "desired" VGC level and the level configured
 200          * in the hardware. The latter is important to reduce the
 201          * number of BBP register reads to reduce register access
 202          * overhead. For this reason we store both values here.
 203          */
 204         u8 vgc_level;
 205         u8 vgc_level_reg;
 206
 207         /*
 208          * Statistics required for Signal quality calculation.
 209          * These fields might be changed during the link_stats()
 210          * callback function.
 211          */
 212         int rx_success;
 213         int rx_failed;
 214         int tx_success;
 215         int tx_failed;
 216 };
 217
 218 /*
 219  * Antenna settings about the currently active link.
 220  */
 221 struct link_ant {
 222         /*
 223          * Antenna flags
 224          */
 225         unsigned int flags;
 226 #define ANTENNA_RX_DIVERSITY    0x00000001
 227 #define ANTENNA_TX_DIVERSITY    0x00000002
 228 #define ANTENNA_MODE_SAMPLE     0x00000004
 229
 230         /*
 231          * Currently active TX/RX antenna setup.
 232          * When software diversity is used, this will indicate
 233          * which antenna is actually used at this time.
 234          */
 235         struct antenna_setup active;
 236
 237         /*
 238          * RSSI information for the different antenna's.
 239          * These statistics are used to determine when
 240          * to switch antenna when using software diversity.
 241          *
 242          *        rssi[0] -> Antenna A RSSI
 243          *        rssi[1] -> Antenna B RSSI
 244          */
 245         int rssi_history[2];
 246
 247         /*
 248          * Current RSSI average of the currently active antenna.
 249          * Similar to the avg_rssi in the link_qual structure
 250          * this value is updated by using the walking average.
 251          */
 252         int rssi_ant;
 253 };
 254
 255 /*
 256  * To optimize the quality of the link we need to store
 257  * the quality of received frames and periodically
 258  * optimize the link.
 259  */
 260 struct link {
 261         /*
 262          * Link tuner counter
 263          * The number of times the link has been tuned
 264          * since the radio has been switched on.
 265          */
 266         u32 count;
 267
 268         /*
 269          * Quality measurement values.
 270          */
 271         struct link_qual qual;
 272
 273         /*
 274          * TX/RX antenna setup.
 275          */
 276         struct link_ant ant;
 277
 278         /*
 279          * Currently active average RSSI value
 280          */
 281         int avg_rssi;
 282
 283         /*
 284          * Currently precalculated percentages of successful
 285          * TX and RX frames.
 286          */
 287         int rx_percentage;
 288         int tx_percentage;
 289
 290         /*
 291          * Work structure for scheduling periodic link tuning.
 292          */
 293         struct delayed_work work;
 294 };
 295
 296 /*
 297  * Interface structure
 298  * Per interface configuration details, this structure
 299  * is allocated as the private data for ieee80211_vif.
 300  */
 301 struct rt2x00_intf {
 302         /*
 303          * All fields within the rt2x00_intf structure
 304          * must be protected with a spinlock.
 305          */
 306         spinlock_t lock;
 307
 308         /*
 309          * MAC of the device.
 310          */
 311         u8 mac[ETH_ALEN];
 312
 313         /*
 314          * BBSID of the AP to associate with.
 315          */
 316         u8 bssid[ETH_ALEN];
 317
 318         /*
 319          * Entry in the beacon queue which belongs to
 320          * this interface. Each interface has its own
 321          * dedicated beacon entry.
 322          */
 323         struct queue_entry *beacon;
 324
 325         /*
 326          * Actions that needed rescheduling.
 327          */
 328         unsigned int delayed_flags;
 329 #define DELAYED_UPDATE_BEACON           0x00000001
 330 #define DELAYED_CONFIG_ERP              0x00000002
 331 #define DELAYED_LED_ASSOC               0x00000004
 332
 333         /*
 334          * Software sequence counter, this is only required
 335          * for hardware which doesn't support hardware
 336          * sequence counting.
 337          */
 338         spinlock_t seqlock;
 339         u16 seqno;
 340 };
 341
 342 static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif)
 343 {
 344         return (struct rt2x00_intf *)vif->drv_priv;
 345 }
 346
 347 /**
 348  * struct hw_mode_spec: Hardware specifications structure
 349  *
 350  * Details about the supported modes, rates and channels
 351  * of a particular chipset. This is used by rt2x00lib
 352  * to build the ieee80211_hw_mode array for mac80211.
 353  *
 354  * @supported_bands: Bitmask contained the supported bands (2.4GHz, 5.2GHz).
 355  * @supported_rates: Rate types which are supported (CCK, OFDM).
 356  * @num_channels: Number of supported channels. This is used as array size
 357  *      for @tx_power_a, @tx_power_bg and @channels.
 358  * @channels: Device/chipset specific channel values (See &struct rf_channel).
 359  * @channels_info: Additional information for channels (See &struct channel_info).
 360  */
 361 struct hw_mode_spec {
 362         unsigned int supported_bands;
 363 #define SUPPORT_BAND_2GHZ       0x00000001
 364 #define SUPPORT_BAND_5GHZ       0x00000002
 365
 366         unsigned int supported_rates;
 367 #define SUPPORT_RATE_CCK        0x00000001
 368 #define SUPPORT_RATE_OFDM       0x00000002
 369
 370         unsigned int num_channels;
 371         const struct rf_channel *channels;
 372         const struct channel_info *channels_info;
 373 };
 374
 375 /*
 376  * Configuration structure wrapper around the
 377  * mac80211 configuration structure.
 378  * When mac80211 configures the driver, rt2x00lib
 379  * can precalculate values which are equal for all
 380  * rt2x00 drivers. Those values can be stored in here.
 381  */
 382 struct rt2x00lib_conf {
 383         struct ieee80211_conf *conf;
 384
 385         struct rf_channel rf;
 386         struct channel_info channel;
 387 };
 388
 389 /*
 390  * Configuration structure for erp settings.
 391  */
 392 struct rt2x00lib_erp {
 393         int short_preamble;
 394         int cts_protection;
 395
 396         int ack_timeout;
 397         int ack_consume_time;
 398
 399         u64 basic_rates;
 400
 401         int slot_time;
 402
 403         short sifs;
 404         short pifs;
 405         short difs;
 406         short eifs;
 407 };
 408
 409 /*
 410  * Configuration structure for hardware encryption.
 411  */
 412 struct rt2x00lib_crypto {
 413         enum cipher cipher;
 414
 415         enum set_key_cmd cmd;
 416         const u8 *address;
 417
 418         u32 bssidx;
 419         u32 aid;
 420
 421         u8 key[16];
 422         u8 tx_mic[8];
 423         u8 rx_mic[8];
 424 };
 425
 426 /*
 427  * Configuration structure wrapper around the
 428  * rt2x00 interface configuration handler.
 429  */
 430 struct rt2x00intf_conf {
 431         /*
 432          * Interface type
 433          */
 434         enum nl80211_iftype type;
 435
 436         /*
 437          * TSF sync value, this is dependant on the operation type.
 438          */
 439         enum tsf_sync sync;
 440
 441         /*
 442          * The MAC and BSSID addressess are simple array of bytes,
 443          * these arrays are little endian, so when sending the addressess
 444          * to the drivers, copy the it into a endian-signed variable.
 445          *
 446          * Note that all devices (except rt2500usb) have 32 bits
 447          * register word sizes. This means that whatever variable we
 448          * pass _must_ be a multiple of 32 bits. Otherwise the device
 449          * might not accept what we are sending to it.
 450          * This will also make it easier for the driver to write
 451          * the data to the device.
 452          */
 453         __le32 mac[2];
 454         __le32 bssid[2];
 455 };
 456
 457 /*
 458  * rt2x00lib callback functions.
 459  */
 460 struct rt2x00lib_ops {
 461         /*
 462          * Interrupt handlers.
 463          */
 464         irq_handler_t irq_handler;
 465
 466         /*
 467          * Device init handlers.
 468          */
 469         int (*probe_hw) (struct rt2x00_dev *rt2x00dev);
 470         char *(*get_firmware_name) (struct rt2x00_dev *rt2x00dev);
 471         u16 (*get_firmware_crc) (const void *data, const size_t len);
 472         int (*load_firmware) (struct rt2x00_dev *rt2x00dev, const void *data,
 473                               const size_t len);
 474
 475         /*
 476          * Device initialization/deinitialization handlers.
 477          */
 478         int (*initialize) (struct rt2x00_dev *rt2x00dev);
 479         void (*uninitialize) (struct rt2x00_dev *rt2x00dev);
 480
 481         /*
 482          * queue initialization handlers
 483          */
 484         bool (*get_entry_state) (struct queue_entry *entry);
 485         void (*clear_entry) (struct queue_entry *entry);
 486
 487         /*
 488          * Radio control handlers.
 489          */
 490         int (*set_device_state) (struct rt2x00_dev *rt2x00dev,
 491                                  enum dev_state state);
 492         int (*rfkill_poll) (struct rt2x00_dev *rt2x00dev);
 493         void (*link_stats) (struct rt2x00_dev *rt2x00dev,
 494                             struct link_qual *qual);
 495         void (*reset_tuner) (struct rt2x00_dev *rt2x00dev,
 496                              struct link_qual *qual);
 497         void (*link_tuner) (struct rt2x00_dev *rt2x00dev,
 498                             struct link_qual *qual, const u32 count);
 499
 500         /*
 501          * TX control handlers
 502          */
 503         void (*write_tx_desc) (struct rt2x00_dev *rt2x00dev,
 504                                struct sk_buff *skb,
 505                                struct txentry_desc *txdesc);
 506         int (*write_tx_data) (struct queue_entry *entry);
 507         void (*write_beacon) (struct queue_entry *entry);
 508         int (*get_tx_data_len) (struct queue_entry *entry);
 509         void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev,
 510                                const enum data_queue_qid queue);
 511
 512         /*
 513          * RX control handlers
 514          */
 515         void (*fill_rxdone) (struct queue_entry *entry,
 516                              struct rxdone_entry_desc *rxdesc);
 517
 518         /*
 519          * Configuration handlers.
 520          */
 521         int (*config_shared_key) (struct rt2x00_dev *rt2x00dev,
 522                                   struct rt2x00lib_crypto *crypto,
 523                                   struct ieee80211_key_conf *key);
 524         int (*config_pairwise_key) (struct rt2x00_dev *rt2x00dev,
 525                                     struct rt2x00lib_crypto *crypto,
 526                                     struct ieee80211_key_conf *key);
 527         void (*config_filter) (struct rt2x00_dev *rt2x00dev,
 528                                const unsigned int filter_flags);
 529         void (*config_intf) (struct rt2x00_dev *rt2x00dev,
 530                              struct rt2x00_intf *intf,
 531                              struct rt2x00intf_conf *conf,
 532                              const unsigned int flags);
 533 #define CONFIG_UPDATE_TYPE              ( 1 << 1 )
 534 #define CONFIG_UPDATE_MAC               ( 1 << 2 )
 535 #define CONFIG_UPDATE_BSSID             ( 1 << 3 )
 536
 537         void (*config_erp) (struct rt2x00_dev *rt2x00dev,
 538                             struct rt2x00lib_erp *erp);
 539         void (*config_ant) (struct rt2x00_dev *rt2x00dev,
 540                             struct antenna_setup *ant);
 541         void (*config) (struct rt2x00_dev *rt2x00dev,
 542                         struct rt2x00lib_conf *libconf,
 543                         const unsigned int changed_flags);
 544 };
 545
 546 /*
 547  * rt2x00 driver callback operation structure.
 548  */
 549 struct rt2x00_ops {
 550         const char *name;
 551         const unsigned int max_sta_intf;
 552         const unsigned int max_ap_intf;
 553         const unsigned int eeprom_size;
 554         const unsigned int rf_size;
 555         const unsigned int tx_queues;
 556         const struct data_queue_desc *rx;
 557         const struct data_queue_desc *tx;
 558         const struct data_queue_desc *bcn;
 559         const struct data_queue_desc *atim;
 560         const struct rt2x00lib_ops *lib;
 561         const struct ieee80211_ops *hw;
 562 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 563         const struct rt2x00debug *debugfs;
 564 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 565 };
 566
 567 /*
 568  * rt2x00 device flags
 569  */
 570 enum rt2x00_flags {
 571         /*
 572          * Device state flags
 573          */
 574         DEVICE_STATE_PRESENT,
 575         DEVICE_STATE_REGISTERED_HW,
 576         DEVICE_STATE_INITIALIZED,
 577         DEVICE_STATE_STARTED,
 578         DEVICE_STATE_STARTED_SUSPEND,
 579         DEVICE_STATE_ENABLED_RADIO,
 580         DEVICE_STATE_DISABLED_RADIO_HW,
 581
 582         /*
 583          * Driver requirements
 584          */
 585         DRIVER_REQUIRE_FIRMWARE,
 586         DRIVER_REQUIRE_BEACON_GUARD,
 587         DRIVER_REQUIRE_ATIM_QUEUE,
 588         DRIVER_REQUIRE_SCHEDULED,
 589         DRIVER_REQUIRE_DMA,
 590         DRIVER_REQUIRE_COPY_IV,
 591
 592         /*
 593          * Driver features
 594          */
 595         CONFIG_SUPPORT_HW_BUTTON,
 596         CONFIG_SUPPORT_HW_CRYPTO,
 597
 598         /*
 599          * Driver configuration
 600          */
 601         CONFIG_FRAME_TYPE,
 602         CONFIG_RF_SEQUENCE,
 603         CONFIG_EXTERNAL_LNA_A,
 604         CONFIG_EXTERNAL_LNA_BG,
 605         CONFIG_DOUBLE_ANTENNA,
 606         CONFIG_DISABLE_LINK_TUNING,
 607 };
 608
 609 /*
 610  * rt2x00 device structure.
 611  */
 612 struct rt2x00_dev {
 613         /*
 614          * Device structure.
 615          * The structure stored in here depends on the
 616          * system bus (PCI or USB).
 617          * When accessing this variable, the rt2x00dev_{pci,usb}
 618          * macro's should be used for correct typecasting.
 619          */
 620         struct device *dev;
 621
 622         /*
 623          * Callback functions.
 624          */
 625         const struct rt2x00_ops *ops;
 626
 627         /*
 628          * IEEE80211 control structure.
 629          */
 630         struct ieee80211_hw *hw;
 631         struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
 632         enum ieee80211_band curr_band;
 633
 634         /*
 635          * rfkill structure for RF state switching support.
 636          * This will only be compiled in when required.
 637          */
 638 #ifdef CONFIG_RT2X00_LIB_RFKILL
 639         unsigned long rfkill_state;
 640 #define RFKILL_STATE_ALLOCATED          1
 641 #define RFKILL_STATE_REGISTERED         2
 642 #define RFKILL_STATE_BLOCKED            3
 643         struct input_polled_dev *rfkill_poll_dev;
 644 #endif /* CONFIG_RT2X00_LIB_RFKILL */
 645
 646         /*
 647          * If enabled, the debugfs interface structures
 648          * required for deregistration of debugfs.
 649          */
 650 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 651         struct rt2x00debug_intf *debugfs_intf;
 652 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 653
 654         /*
 655          * LED structure for changing the LED status
 656          * by mac8011 or the kernel.
 657          */
 658 #ifdef CONFIG_RT2X00_LIB_LEDS
 659         struct rt2x00_led led_radio;
 660         struct rt2x00_led led_assoc;
 661         struct rt2x00_led led_qual;
 662         u16 led_mcu_reg;
 663 #endif /* CONFIG_RT2X00_LIB_LEDS */
 664
 665         /*
 666          * Device flags.
 667          * In these flags the current status and some
 668          * of the device capabilities are stored.
 669          */
 670         unsigned long flags;
 671
 672         /*
 673          * Chipset identification.
 674          */
 675         struct rt2x00_chip chip;
 676
 677         /*
 678          * hw capability specifications.
 679          */
 680         struct hw_mode_spec spec;
 681
 682         /*
 683          * This is the default TX/RX antenna setup as indicated
 684          * by the device's EEPROM.
 685          */
 686         struct antenna_setup default_ant;
 687
 688         /*
 689          * Register pointers
 690          * csr.base: CSR base register address. (PCI)
 691          * csr.cache: CSR cache for usb_control_msg. (USB)
 692          */
 693         union csr {
 694                 void __iomem *base;
 695                 void *cache;
 696         } csr;
 697
 698         /*
 699          * Mutex to protect register accesses.
 700          * For PCI and USB devices it protects against concurrent indirect
 701          * register access (BBP, RF, MCU) since accessing those
 702          * registers require multiple calls to the CSR registers.
 703          * For USB devices it also protects the csr_cache since that
 704          * field is used for normal CSR access and it cannot support
 705          * multiple callers simultaneously.
 706          */
 707         struct mutex csr_mutex;
 708
 709         /*
 710          * Current packet filter configuration for the device.
 711          * This contains all currently active FIF_* flags send
 712          * to us by mac80211 during configure_filter().
 713          */
 714         unsigned int packet_filter;
 715
 716         /*
 717          * Interface details:
 718          *  - Open ap interface count.
 719          *  - Open sta interface count.
 720          *  - Association count.
 721          */
 722         unsigned int intf_ap_count;
 723         unsigned int intf_sta_count;
 724         unsigned int intf_associated;
 725
 726         /*
 727          * Link quality
 728          */
 729         struct link link;
 730
 731         /*
 732          * EEPROM data.
 733          */
 734         __le16 *eeprom;
 735
 736         /*
 737          * Active RF register values.
 738          * These are stored here so we don't need
 739          * to read the rf registers and can directly
 740          * use this value instead.
 741          * This field should be accessed by using
 742          * rt2x00_rf_read() and rt2x00_rf_write().
 743          */
 744         u32 *rf;
 745
 746         /*
 747          * LNA gain
 748          */
 749         short lna_gain;
 750
 751         /*
 752          * Current TX power value.
 753          */
 754         u16 tx_power;
 755
 756         /*
 757          * Current retry values.
 758          */
 759         u8 short_retry;
 760         u8 long_retry;
 761
 762         /*
 763          * Rssi <-> Dbm offset
 764          */
 765         u8 rssi_offset;
 766
 767         /*
 768          * Frequency offset (for rt61pci & rt73usb).
 769          */
 770         u8 freq_offset;
 771
 772         /*
 773          * Low level statistics which will have
 774          * to be kept up to date while device is running.
 775          */
 776         struct ieee80211_low_level_stats low_level_stats;
 777
 778         /*
 779          * RX configuration information.
 780          */
 781         struct ieee80211_rx_status rx_status;
 782
 783         /*
 784          * Scheduled work.
 785          * NOTE: intf_work will use ieee80211_iterate_active_interfaces()
 786          * which means it cannot be placed on the hw->workqueue
 787          * due to RTNL locking requirements.
 788          */
 789         struct work_struct intf_work;
 790         struct work_struct filter_work;
 791
 792         /*
 793          * Data queue arrays for RX, TX and Beacon.
 794          * The Beacon array also contains the Atim queue
 795          * if that is supported by the device.
 796          */
 797         unsigned int data_queues;
 798         struct data_queue *rx;
 799         struct data_queue *tx;
 800         struct data_queue *bcn;
 801
 802         /*
 803          * Firmware image.
 804          */
 805         const struct firmware *fw;
 806 };
 807
 808 /*
 809  * Generic RF access.
 810  * The RF is being accessed by word index.
 811  */
 812 static inline void rt2x00_rf_read(struct rt2x00_dev *rt2x00dev,
 813                                   const unsigned int word, u32 *data)
 814 {
 815         *data = rt2x00dev->rf[word];
 816 }
 817
 818 static inline void rt2x00_rf_write(struct rt2x00_dev *rt2x00dev,
 819                                    const unsigned int word, u32 data)
 820 {
 821         rt2x00dev->rf[word] = data;
 822 }
 823
 824 /*
 825  *  Generic EEPROM access.
 826  * The EEPROM is being accessed by word index.
 827  */
 828 static inline void *rt2x00_eeprom_addr(struct rt2x00_dev *rt2x00dev,
 829                                        const unsigned int word)
 830 {
 831         return (void *)&rt2x00dev->eeprom[word];
 832 }
 833
 834 static inline void rt2x00_eeprom_read(struct rt2x00_dev *rt2x00dev,
 835                                       const unsigned int word, u16 *data)
 836 {
 837         *data = le16_to_cpu(rt2x00dev->eeprom[word]);
 838 }
 839
 840 static inline void rt2x00_eeprom_write(struct rt2x00_dev *rt2x00dev,
 841                                        const unsigned int word, u16 data)
 842 {
 843         rt2x00dev->eeprom[word] = cpu_to_le16(data);
 844 }
 845
 846 /*
 847  * Chipset handlers
 848  */
 849 static inline void rt2x00_set_chip(struct rt2x00_dev *rt2x00dev,
 850                                    const u16 rt, const u16 rf, const u32 rev)
 851 {
 852         INFO(rt2x00dev,
 853              "Chipset detected - rt: %04x, rf: %04x, rev: %08x.\n",
 854              rt, rf, rev);
 855
 856         rt2x00dev->chip.rt = rt;
 857         rt2x00dev->chip.rf = rf;
 858         rt2x00dev->chip.rev = rev;
 859 }
 860
 861 static inline char rt2x00_rt(const struct rt2x00_chip *chipset, const u16 chip)
 862 {
 863         return (chipset->rt == chip);
 864 }
 865
 866 static inline char rt2x00_rf(const struct rt2x00_chip *chipset, const u16 chip)
 867 {
 868         return (chipset->rf == chip);
 869 }
 870
 871 static inline u16 rt2x00_rev(const struct rt2x00_chip *chipset)
 872 {
 873         return chipset->rev;
 874 }
 875
 876 static inline u16 rt2x00_check_rev(const struct rt2x00_chip *chipset,
 877                                    const u32 rev)
 878 {
 879         return (((chipset->rev & 0xffff0) == rev) &&
 880                 !!(chipset->rev & 0x0000f));
 881 }
 882
 883 /**
 884  * rt2x00queue_map_txskb - Map a skb into DMA for TX purposes.
 885  * @rt2x00dev: Pointer to &struct rt2x00_dev.
 886  * @skb: The skb to map.
 887  */
 888 void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
 889
 890 /**
 891  * rt2x00queue_get_queue - Convert queue index to queue pointer
 892  * @rt2x00dev: Pointer to &struct rt2x00_dev.
 893  * @queue: rt2x00 queue index (see &enum data_queue_qid).
 894  */
 895 struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev,
 896                                          const enum data_queue_qid queue);
 897
 898 /**
 899  * rt2x00queue_get_entry - Get queue entry where the given index points to.
 900  * @queue: Pointer to &struct data_queue from where we obtain the entry.
 901  * @index: Index identifier for obtaining the correct index.
 902  */
 903 struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue,
 904                                           enum queue_index index);
 905
 906 /*
 907  * Interrupt context handlers.
 908  */
 909 void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev);
 910 void rt2x00lib_txdone(struct queue_entry *entry,
 911                       struct txdone_entry_desc *txdesc);
 912 void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 913                       struct queue_entry *entry);
 914
 915 /*
 916  * mac80211 handlers.
 917  */
 918 int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
 919 int rt2x00mac_start(struct ieee80211_hw *hw);
 920 void rt2x00mac_stop(struct ieee80211_hw *hw);
 921 int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 922                             struct ieee80211_if_init_conf *conf);
 923 void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
 924                                 struct ieee80211_if_init_conf *conf);
 925 int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed);
 926 int rt2x00mac_config_interface(struct ieee80211_hw *hw,
 927                                struct ieee80211_vif *vif,
 928                                struct ieee80211_if_conf *conf);
 929 void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
 930                                 unsigned int changed_flags,
 931                                 unsigned int *total_flags,
 932                                 int mc_count, struct dev_addr_list *mc_list);
 933 #ifdef CONFIG_RT2X00_LIB_CRYPTO
 934 int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 935                       struct ieee80211_vif *vif, struct ieee80211_sta *sta,
 936                       struct ieee80211_key_conf *key);
 937 #else
 938 #define rt2x00mac_set_key       NULL
 939 #endif /* CONFIG_RT2X00_LIB_CRYPTO */
 940 int rt2x00mac_get_stats(struct ieee80211_hw *hw,
 941                         struct ieee80211_low_level_stats *stats);
 942 int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw,
 943                            struct ieee80211_tx_queue_stats *stats);
 944 void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
 945                                 struct ieee80211_vif *vif,
 946                                 struct ieee80211_bss_conf *bss_conf,
 947                                 u32 changes);
 948 int rt2x00mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
 949                       const struct ieee80211_tx_queue_params *params);
 950
 951 /*
 952  * Driver allocation handlers.
 953  */
 954 int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev);
 955 void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev);
 956 #ifdef CONFIG_PM
 957 int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state);
 958 int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev);
 959 #endif /* CONFIG_PM */
 960
 961 #endif /* RT2X00_H */