1 /* ------------------------------------------------------------------------- */
2 /* i2c-iop3xx.c i2c driver algorithms for Intel XScale IOP3xx & IXP46x */
3 /* ------------------------------------------------------------------------- */
4 /* Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd
5 * <Peter dot Milne at D hyphen TACQ dot com>
7 * With acknowledgements to i2c-algo-ibm_ocp.c by
8 * Ian DaSilva, MontaVista Software, Inc. idasilva@mvista.com
10 * And i2c-algo-pcf.c, which was created by Simon G. Vogl and Hans Berglund:
12 * Copyright (C) 1995-1997 Simon G. Vogl, 1998-2000 Hans Berglund
14 * And which acknowledged Kyösti Mälkki <kmalkki@cc.hut.fi>,
15 * Frodo Looijaard <frodol@dds.nl>, Martin Bailey<mbailey@littlefeet-inc.com>
17 * Major cleanup by Deepak Saxena <dsaxena@plexity.net>, 01/2005:
19 * - Use driver model to pass per-chip info instead of hardcoding and #ifdefs
20 * - Use ioremap/__raw_readl/__raw_writel instead of direct dereference
21 * - Make it work with IXP46x chips
22 * - Cleanup function names, coding style, etc
24 * - writing to slave address causes latchup on iop331.
25 * fix: driver refuses to address self.
27 * This program is free software; you can redistribute it and/or modify
28 * it under the terms of the GNU General Public License as published by
29 * the Free Software Foundation, version 2.
32 #include <linux/interrupt.h>
33 #include <linux/kernel.h>
34 #include <linux/module.h>
35 #include <linux/delay.h>
36 #include <linux/slab.h>
37 #include <linux/init.h>
38 #include <linux/errno.h>
39 #include <linux/platform_device.h>
40 #include <linux/i2c.h>
44 #include "i2c-iop3xx.h"
46 /* global unit counter */
49 static inline unsigned char
50 iic_cook_addr(struct i2c_msg
*msg
)
54 addr
= (msg
->addr
<< 1);
56 if (msg
->flags
& I2C_M_RD
)
62 if (msg
->flags
& I2C_M_REV_DIR_ADDR
)
69 iop3xx_i2c_reset(struct i2c_algo_iop3xx_data
*iop3xx_adap
)
71 /* Follows devman 9.3 */
72 __raw_writel(IOP3XX_ICR_UNIT_RESET
, iop3xx_adap
->ioaddr
+ CR_OFFSET
);
73 __raw_writel(IOP3XX_ISR_CLEARBITS
, iop3xx_adap
->ioaddr
+ SR_OFFSET
);
74 __raw_writel(0, iop3xx_adap
->ioaddr
+ CR_OFFSET
);
78 iop3xx_i2c_enable(struct i2c_algo_iop3xx_data
*iop3xx_adap
)
80 u32 cr
= IOP3XX_ICR_GCD
| IOP3XX_ICR_SCLEN
| IOP3XX_ICR_UE
;
83 * Every time unit enable is asserted, GPOD needs to be cleared
84 * on IOP3XX to avoid data corruption on the bus.
86 #if defined(CONFIG_ARCH_IOP32X) || defined(CONFIG_ARCH_IOP33X)
87 if (iop3xx_adap
->id
== 0) {
88 gpio_line_set(IOP3XX_GPIO_LINE(7), GPIO_LOW
);
89 gpio_line_set(IOP3XX_GPIO_LINE(6), GPIO_LOW
);
91 gpio_line_set(IOP3XX_GPIO_LINE(5), GPIO_LOW
);
92 gpio_line_set(IOP3XX_GPIO_LINE(4), GPIO_LOW
);
95 /* NB SR bits not same position as CR IE bits :-( */
96 iop3xx_adap
->SR_enabled
=
97 IOP3XX_ISR_ALD
| IOP3XX_ISR_BERRD
|
98 IOP3XX_ISR_RXFULL
| IOP3XX_ISR_TXEMPTY
;
100 cr
|= IOP3XX_ICR_ALD_IE
| IOP3XX_ICR_BERR_IE
|
101 IOP3XX_ICR_RXFULL_IE
| IOP3XX_ICR_TXEMPTY_IE
;
103 __raw_writel(cr
, iop3xx_adap
->ioaddr
+ CR_OFFSET
);
107 iop3xx_i2c_transaction_cleanup(struct i2c_algo_iop3xx_data
*iop3xx_adap
)
109 unsigned long cr
= __raw_readl(iop3xx_adap
->ioaddr
+ CR_OFFSET
);
111 cr
&= ~(IOP3XX_ICR_MSTART
| IOP3XX_ICR_TBYTE
|
112 IOP3XX_ICR_MSTOP
| IOP3XX_ICR_SCLEN
);
114 __raw_writel(cr
, iop3xx_adap
->ioaddr
+ CR_OFFSET
);
118 * NB: the handler has to clear the source of the interrupt!
119 * Then it passes the SR flags of interest to BH via adap data
122 iop3xx_i2c_irq_handler(int this_irq
, void *dev_id
)
124 struct i2c_algo_iop3xx_data
*iop3xx_adap
= dev_id
;
125 u32 sr
= __raw_readl(iop3xx_adap
->ioaddr
+ SR_OFFSET
);
127 if ((sr
&= iop3xx_adap
->SR_enabled
)) {
128 __raw_writel(sr
, iop3xx_adap
->ioaddr
+ SR_OFFSET
);
129 iop3xx_adap
->SR_received
|= sr
;
130 wake_up_interruptible(&iop3xx_adap
->waitq
);
135 /* check all error conditions, clear them , report most important */
137 iop3xx_i2c_error(u32 sr
)
141 if ((sr
& IOP3XX_ISR_BERRD
)) {
142 if ( !rc
) rc
= -I2C_ERR_BERR
;
144 if ((sr
& IOP3XX_ISR_ALD
)) {
145 if ( !rc
) rc
= -I2C_ERR_ALD
;
151 iop3xx_i2c_get_srstat(struct i2c_algo_iop3xx_data
*iop3xx_adap
)
156 spin_lock_irqsave(&iop3xx_adap
->lock
, flags
);
157 sr
= iop3xx_adap
->SR_received
;
158 iop3xx_adap
->SR_received
= 0;
159 spin_unlock_irqrestore(&iop3xx_adap
->lock
, flags
);
165 * sleep until interrupted, then recover and analyse the SR
168 typedef int (* compare_func
)(unsigned test
, unsigned mask
);
169 /* returns 1 on correct comparison */
172 iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data
*iop3xx_adap
,
173 unsigned flags
, unsigned* status
,
174 compare_func compare
)
182 interrupted
= wait_event_interruptible_timeout (
184 (done
= compare( sr
= iop3xx_i2c_get_srstat(iop3xx_adap
) ,flags
)),
187 if ((rc
= iop3xx_i2c_error(sr
)) < 0) {
190 } else if (!interrupted
) {
202 * Concrete compare_funcs
205 all_bits_clear(unsigned test
, unsigned mask
)
207 return (test
& mask
) == 0;
211 any_bits_set(unsigned test
, unsigned mask
)
213 return (test
& mask
) != 0;
217 iop3xx_i2c_wait_tx_done(struct i2c_algo_iop3xx_data
*iop3xx_adap
, int *status
)
219 return iop3xx_i2c_wait_event(
221 IOP3XX_ISR_TXEMPTY
| IOP3XX_ISR_ALD
| IOP3XX_ISR_BERRD
,
222 status
, any_bits_set
);
226 iop3xx_i2c_wait_rx_done(struct i2c_algo_iop3xx_data
*iop3xx_adap
, int *status
)
228 return iop3xx_i2c_wait_event(
230 IOP3XX_ISR_RXFULL
| IOP3XX_ISR_ALD
| IOP3XX_ISR_BERRD
,
231 status
, any_bits_set
);
235 iop3xx_i2c_wait_idle(struct i2c_algo_iop3xx_data
*iop3xx_adap
, int *status
)
237 return iop3xx_i2c_wait_event(
238 iop3xx_adap
, IOP3XX_ISR_UNITBUSY
, status
, all_bits_clear
);
242 iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data
*iop3xx_adap
,
245 unsigned long cr
= __raw_readl(iop3xx_adap
->ioaddr
+ CR_OFFSET
);
249 /* avoid writing to my slave address (hangs on 80331),
250 * forbidden in Intel developer manual
252 if (msg
->addr
== MYSAR
) {
256 __raw_writel(iic_cook_addr(msg
), iop3xx_adap
->ioaddr
+ DBR_OFFSET
);
258 cr
&= ~(IOP3XX_ICR_MSTOP
| IOP3XX_ICR_NACK
);
259 cr
|= IOP3XX_ICR_MSTART
| IOP3XX_ICR_TBYTE
;
261 __raw_writel(cr
, iop3xx_adap
->ioaddr
+ CR_OFFSET
);
262 rc
= iop3xx_i2c_wait_tx_done(iop3xx_adap
, &status
);
268 iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data
*iop3xx_adap
, char byte
,
271 unsigned long cr
= __raw_readl(iop3xx_adap
->ioaddr
+ CR_OFFSET
);
275 __raw_writel(byte
, iop3xx_adap
->ioaddr
+ DBR_OFFSET
);
276 cr
&= ~IOP3XX_ICR_MSTART
;
278 cr
|= IOP3XX_ICR_MSTOP
;
280 cr
&= ~IOP3XX_ICR_MSTOP
;
282 cr
|= IOP3XX_ICR_TBYTE
;
283 __raw_writel(cr
, iop3xx_adap
->ioaddr
+ CR_OFFSET
);
284 rc
= iop3xx_i2c_wait_tx_done(iop3xx_adap
, &status
);
290 iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data
*iop3xx_adap
, char* byte
,
293 unsigned long cr
= __raw_readl(iop3xx_adap
->ioaddr
+ CR_OFFSET
);
297 cr
&= ~IOP3XX_ICR_MSTART
;
300 cr
|= IOP3XX_ICR_MSTOP
| IOP3XX_ICR_NACK
;
302 cr
&= ~(IOP3XX_ICR_MSTOP
| IOP3XX_ICR_NACK
);
304 cr
|= IOP3XX_ICR_TBYTE
;
305 __raw_writel(cr
, iop3xx_adap
->ioaddr
+ CR_OFFSET
);
307 rc
= iop3xx_i2c_wait_rx_done(iop3xx_adap
, &status
);
309 *byte
= __raw_readl(iop3xx_adap
->ioaddr
+ DBR_OFFSET
);
315 iop3xx_i2c_writebytes(struct i2c_adapter
*i2c_adap
, const char *buf
, int count
)
317 struct i2c_algo_iop3xx_data
*iop3xx_adap
= i2c_adap
->algo_data
;
321 for (ii
= 0; rc
== 0 && ii
!= count
; ++ii
)
322 rc
= iop3xx_i2c_write_byte(iop3xx_adap
, buf
[ii
], ii
==count
-1);
327 iop3xx_i2c_readbytes(struct i2c_adapter
*i2c_adap
, char *buf
, int count
)
329 struct i2c_algo_iop3xx_data
*iop3xx_adap
= i2c_adap
->algo_data
;
333 for (ii
= 0; rc
== 0 && ii
!= count
; ++ii
)
334 rc
= iop3xx_i2c_read_byte(iop3xx_adap
, &buf
[ii
], ii
==count
-1);
340 * Description: This function implements combined transactions. Combined
341 * transactions consist of combinations of reading and writing blocks of data.
342 * FROM THE SAME ADDRESS
343 * Each transfer (i.e. a read or a write) is separated by a repeated start
347 iop3xx_i2c_handle_msg(struct i2c_adapter
*i2c_adap
, struct i2c_msg
* pmsg
)
349 struct i2c_algo_iop3xx_data
*iop3xx_adap
= i2c_adap
->algo_data
;
352 rc
= iop3xx_i2c_send_target_addr(iop3xx_adap
, pmsg
);
357 if ((pmsg
->flags
&I2C_M_RD
)) {
358 return iop3xx_i2c_readbytes(i2c_adap
, pmsg
->buf
, pmsg
->len
);
360 return iop3xx_i2c_writebytes(i2c_adap
, pmsg
->buf
, pmsg
->len
);
365 * master_xfer() - main read/write entry
368 iop3xx_i2c_master_xfer(struct i2c_adapter
*i2c_adap
, struct i2c_msg
*msgs
,
371 struct i2c_algo_iop3xx_data
*iop3xx_adap
= i2c_adap
->algo_data
;
376 iop3xx_i2c_wait_idle(iop3xx_adap
, &status
);
377 iop3xx_i2c_reset(iop3xx_adap
);
378 iop3xx_i2c_enable(iop3xx_adap
);
380 for (im
= 0; ret
== 0 && im
!= num
; im
++) {
381 ret
= iop3xx_i2c_handle_msg(i2c_adap
, &msgs
[im
]);
384 iop3xx_i2c_transaction_cleanup(iop3xx_adap
);
393 iop3xx_i2c_func(struct i2c_adapter
*adap
)
395 return I2C_FUNC_I2C
| I2C_FUNC_SMBUS_EMUL
;
398 static const struct i2c_algorithm iop3xx_i2c_algo
= {
399 .master_xfer
= iop3xx_i2c_master_xfer
,
400 .functionality
= iop3xx_i2c_func
,
404 iop3xx_i2c_remove(struct platform_device
*pdev
)
406 struct i2c_adapter
*padapter
= platform_get_drvdata(pdev
);
407 struct i2c_algo_iop3xx_data
*adapter_data
=
408 (struct i2c_algo_iop3xx_data
*)padapter
->algo_data
;
409 struct resource
*res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
410 unsigned long cr
= __raw_readl(adapter_data
->ioaddr
+ CR_OFFSET
);
413 * Disable the actual HW unit
415 cr
&= ~(IOP3XX_ICR_ALD_IE
| IOP3XX_ICR_BERR_IE
|
416 IOP3XX_ICR_RXFULL_IE
| IOP3XX_ICR_TXEMPTY_IE
);
417 __raw_writel(cr
, adapter_data
->ioaddr
+ CR_OFFSET
);
419 iounmap((void __iomem
*)adapter_data
->ioaddr
);
420 release_mem_region(res
->start
, IOP3XX_I2C_IO_SIZE
);
424 platform_set_drvdata(pdev
, NULL
);
430 iop3xx_i2c_probe(struct platform_device
*pdev
)
432 struct resource
*res
;
434 struct i2c_adapter
*new_adapter
;
435 struct i2c_algo_iop3xx_data
*adapter_data
;
437 new_adapter
= kzalloc(sizeof(struct i2c_adapter
), GFP_KERNEL
);
443 adapter_data
= kzalloc(sizeof(struct i2c_algo_iop3xx_data
), GFP_KERNEL
);
449 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
455 if (!request_mem_region(res
->start
, IOP3XX_I2C_IO_SIZE
, pdev
->name
)) {
460 /* set the adapter enumeration # */
461 adapter_data
->id
= i2c_id
++;
463 adapter_data
->ioaddr
= (u32
)ioremap(res
->start
, IOP3XX_I2C_IO_SIZE
);
464 if (!adapter_data
->ioaddr
) {
469 irq
= platform_get_irq(pdev
, 0);
474 ret
= request_irq(irq
, iop3xx_i2c_irq_handler
, 0,
475 pdev
->name
, adapter_data
);
482 memcpy(new_adapter
->name
, pdev
->name
, strlen(pdev
->name
));
483 new_adapter
->owner
= THIS_MODULE
;
484 new_adapter
->class = I2C_CLASS_HWMON
| I2C_CLASS_SPD
;
485 new_adapter
->dev
.parent
= &pdev
->dev
;
486 new_adapter
->nr
= pdev
->id
;
489 * Default values...should these come in from board code?
491 new_adapter
->timeout
= 100;
492 new_adapter
->algo
= &iop3xx_i2c_algo
;
494 init_waitqueue_head(&adapter_data
->waitq
);
495 spin_lock_init(&adapter_data
->lock
);
497 iop3xx_i2c_reset(adapter_data
);
498 iop3xx_i2c_enable(adapter_data
);
500 platform_set_drvdata(pdev
, new_adapter
);
501 new_adapter
->algo_data
= adapter_data
;
503 i2c_add_numbered_adapter(new_adapter
);
508 iounmap((void __iomem
*)adapter_data
->ioaddr
);
511 release_mem_region(res
->start
, IOP3XX_I2C_IO_SIZE
);
524 static struct platform_driver iop3xx_i2c_driver
= {
525 .probe
= iop3xx_i2c_probe
,
526 .remove
= iop3xx_i2c_remove
,
528 .owner
= THIS_MODULE
,
529 .name
= "IOP3xx-I2C",
534 i2c_iop3xx_init (void)
536 return platform_driver_register(&iop3xx_i2c_driver
);
540 i2c_iop3xx_exit (void)
542 platform_driver_unregister(&iop3xx_i2c_driver
);
546 module_init (i2c_iop3xx_init
);
547 module_exit (i2c_iop3xx_exit
);
549 MODULE_AUTHOR("D-TACQ Solutions Ltd <www.d-tacq.com>");
550 MODULE_DESCRIPTION("IOP3xx iic algorithm and driver");
551 MODULE_LICENSE("GPL");
552 MODULE_ALIAS("platform:IOP3xx-I2C");