drivers/block/cciss.h

   1 #ifndef CCISS_H
   2 #define CCISS_H
   3
   4 #include <linux/genhd.h>
   5 #include <linux/mutex.h>
   6
   7 #include "cciss_cmd.h"
   8
   9
  10 #define NWD_SHIFT       4
  11 #define MAX_PART        (1 << NWD_SHIFT)
  12
  13 #define IO_OK           0
  14 #define IO_ERROR        1
  15 #define IO_NEEDS_RETRY  3
  16
  17 #define VENDOR_LEN      8
  18 #define MODEL_LEN       16
  19 #define REV_LEN         4
  20
  21 struct ctlr_info;
  22 typedef struct ctlr_info ctlr_info_t;
  23
  24 struct access_method {
  25         void (*submit_command)(ctlr_info_t *h, CommandList_struct *c);
  26         void (*set_intr_mask)(ctlr_info_t *h, unsigned long val);
  27         unsigned long (*fifo_full)(ctlr_info_t *h);
  28         bool (*intr_pending)(ctlr_info_t *h);
  29         unsigned long (*command_completed)(ctlr_info_t *h);
  30 };
  31 typedef struct _drive_info_struct
  32 {
  33         unsigned char LunID[8];
  34         int     usage_count;
  35         struct request_queue *queue;
  36         sector_t nr_blocks;
  37         int     block_size;
  38         int     heads;
  39         int     sectors;
  40         int     cylinders;
  41         int     raid_level; /* set to -1 to indicate that
  42                              * the drive is not in use/configured
  43                              */
  44         int     busy_configuring; /* This is set when a drive is being removed
  45                                    * to prevent it from being opened or it's
  46                                    * queue from being started.
  47                                    */
  48         struct  device dev;
  49         __u8 serial_no[16]; /* from inquiry page 0x83,
  50                              * not necc. null terminated.
  51                              */
  52         char vendor[VENDOR_LEN + 1]; /* SCSI vendor string */
  53         char model[MODEL_LEN + 1];   /* SCSI model string */
  54         char rev[REV_LEN + 1];       /* SCSI revision string */
  55         char device_initialized;     /* indicates whether dev is initialized */
  56 } drive_info_struct;
  57
  58 struct ctlr_info
  59 {
  60         int     ctlr;
  61         char    devname[8];
  62         char    *product_name;
  63         char    firm_ver[4]; /* Firmware version */
  64         struct pci_dev *pdev;
  65         __u32   board_id;
  66         void __iomem *vaddr;
  67         unsigned long paddr;
  68         int     nr_cmds; /* Number of commands allowed on this controller */
  69         CfgTable_struct __iomem *cfgtable;
  70         int     interrupts_enabled;
  71         int     major;
  72         int     max_commands;
  73         int     commands_outstanding;
  74         int     max_outstanding; /* Debug */
  75         int     num_luns;
  76         int     highest_lun;
  77         int     usage_count;  /* number of opens all all minor devices */
  78         /* Need space for temp sg list
  79          * number of scatter/gathers supported
  80          * number of scatter/gathers in chained block
  81          */
  82         struct  scatterlist **scatter_list;
  83         int     maxsgentries;
  84         int     chainsize;
  85         int     max_cmd_sgentries;
  86         SGDescriptor_struct **cmd_sg_list;
  87
  88 #       define PERF_MODE_INT    0
  89 #       define DOORBELL_INT     1
  90 #       define SIMPLE_MODE_INT  2
  91 #       define MEMQ_MODE_INT    3
  92         unsigned int intr[4];
  93         unsigned int msix_vector;
  94         unsigned int msi_vector;
  95         int     cciss_max_sectors;
  96         BYTE    cciss_read;
  97         BYTE    cciss_write;
  98         BYTE    cciss_read_capacity;
  99
 100         /* information about each logical volume */
 101         drive_info_struct *drv[CISS_MAX_LUN];
 102
 103         struct access_method access;
 104
 105         /* queue and queue Info */
 106         struct list_head reqQ;
 107         struct list_head cmpQ;
 108         unsigned int Qdepth;
 109         unsigned int maxQsinceinit;
 110         unsigned int maxSG;
 111         spinlock_t lock;
 112
 113         /* pointers to command and error info pool */
 114         CommandList_struct      *cmd_pool;
 115         dma_addr_t              cmd_pool_dhandle;
 116         ErrorInfo_struct        *errinfo_pool;
 117         dma_addr_t              errinfo_pool_dhandle;
 118         unsigned long           *cmd_pool_bits;
 119         int                     nr_allocs;
 120         int                     nr_frees;
 121         int                     busy_configuring;
 122         int                     busy_initializing;
 123         int                     busy_scanning;
 124         struct mutex            busy_shutting_down;
 125
 126         /* This element holds the zero based queue number of the last
 127          * queue to be started.  It is used for fairness.
 128         */
 129         int                     next_to_run;
 130
 131         /* Disk structures we need to pass back */
 132         struct gendisk   *gendisk[CISS_MAX_LUN];
 133 #ifdef CONFIG_CISS_SCSI_TAPE
 134         struct cciss_scsi_adapter_data_t *scsi_ctlr;
 135 #endif
 136         unsigned char alive;
 137         struct list_head scan_list;
 138         struct completion scan_wait;
 139         struct device dev;
 140         /*
 141          * Performant mode tables.
 142          */
 143         u32 trans_support;
 144         u32 trans_offset;
 145         struct TransTable_struct *transtable;
 146         unsigned long transMethod;
 147
 148         /*
 149          * Performant mode completion buffer
 150          */
 151         u64 *reply_pool;
 152         dma_addr_t reply_pool_dhandle;
 153         u64 *reply_pool_head;
 154         size_t reply_pool_size;
 155         unsigned char reply_pool_wraparound;
 156         u32 *blockFetchTable;
 157 };
 158
 159 /*  Defining the diffent access_methods
 160  *
 161  * Memory mapped FIFO interface (SMART 53xx cards)
 162  */
 163 #define SA5_DOORBELL    0x20
 164 #define SA5_REQUEST_PORT_OFFSET 0x40
 165 #define SA5_REPLY_INTR_MASK_OFFSET      0x34
 166 #define SA5_REPLY_PORT_OFFSET           0x44
 167 #define SA5_INTR_STATUS         0x30
 168 #define SA5_SCRATCHPAD_OFFSET   0xB0
 169
 170 #define SA5_CTCFG_OFFSET        0xB4
 171 #define SA5_CTMEM_OFFSET        0xB8
 172
 173 #define SA5_INTR_OFF            0x08
 174 #define SA5B_INTR_OFF           0x04
 175 #define SA5_INTR_PENDING        0x08
 176 #define SA5B_INTR_PENDING       0x04
 177 #define FIFO_EMPTY              0xffffffff
 178 #define CCISS_FIRMWARE_READY    0xffff0000 /* value in scratchpad register */
 179 /* Perf. mode flags */
 180 #define SA5_PERF_INTR_PENDING   0x04
 181 #define SA5_PERF_INTR_OFF       0x05
 182 #define SA5_OUTDB_STATUS_PERF_BIT       0x01
 183 #define SA5_OUTDB_CLEAR_PERF_BIT        0x01
 184 #define SA5_OUTDB_CLEAR         0xA0
 185 #define SA5_OUTDB_CLEAR_PERF_BIT        0x01
 186 #define SA5_OUTDB_STATUS        0x9C
 187
 188
 189 #define  CISS_ERROR_BIT         0x02
 190
 191 #define CCISS_INTR_ON   1
 192 #define CCISS_INTR_OFF  0
 193
 194
 195 /* CCISS_BOARD_READY_WAIT_SECS is how long to wait for a board
 196  * to become ready, in seconds, before giving up on it.
 197  * CCISS_BOARD_READY_POLL_INTERVAL_MSECS * is how long to wait
 198  * between polling the board to see if it is ready, in
 199  * milliseconds.  CCISS_BOARD_READY_ITERATIONS is derived
 200  * the above.
 201  */
 202 #define CCISS_BOARD_READY_WAIT_SECS (120)
 203 #define CCISS_BOARD_NOT_READY_WAIT_SECS (10)
 204 #define CCISS_BOARD_READY_POLL_INTERVAL_MSECS (100)
 205 #define CCISS_BOARD_READY_ITERATIONS \
 206         ((CCISS_BOARD_READY_WAIT_SECS * 1000) / \
 207                 CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
 208 #define CCISS_BOARD_NOT_READY_ITERATIONS \
 209         ((CCISS_BOARD_NOT_READY_WAIT_SECS * 1000) / \
 210                 CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
 211 #define CCISS_POST_RESET_PAUSE_MSECS (3000)
 212 #define CCISS_POST_RESET_NOOP_INTERVAL_MSECS (1000)
 213 #define CCISS_POST_RESET_NOOP_RETRIES (12)
 214
 215 /*
 216         Send the command to the hardware
 217 */
 218 static void SA5_submit_command( ctlr_info_t *h, CommandList_struct *c)
 219 {
 220 #ifdef CCISS_DEBUG
 221         printk(KERN_WARNING "cciss%d: Sending %08x - down to controller\n",
 222                         h->ctlr, c->busaddr);
 223 #endif /* CCISS_DEBUG */
 224          writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
 225          h->commands_outstanding++;
 226          if ( h->commands_outstanding > h->max_outstanding)
 227                 h->max_outstanding = h->commands_outstanding;
 228 }
 229
 230 /*
 231  *  This card is the opposite of the other cards.
 232  *   0 turns interrupts on...
 233  *   0x08 turns them off...
 234  */
 235 static void SA5_intr_mask(ctlr_info_t *h, unsigned long val)
 236 {
 237         if (val)
 238         { /* Turn interrupts on */
 239                 h->interrupts_enabled = 1;
 240                 writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 241         } else /* Turn them off */
 242         {
 243                 h->interrupts_enabled = 0;
 244                 writel( SA5_INTR_OFF,
 245                         h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 246         }
 247 }
 248 /*
 249  *  This card is the opposite of the other cards.
 250  *   0 turns interrupts on...
 251  *   0x04 turns them off...
 252  */
 253 static void SA5B_intr_mask(ctlr_info_t *h, unsigned long val)
 254 {
 255         if (val)
 256         { /* Turn interrupts on */
 257                 h->interrupts_enabled = 1;
 258                 writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 259         } else /* Turn them off */
 260         {
 261                 h->interrupts_enabled = 0;
 262                 writel( SA5B_INTR_OFF,
 263                         h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 264         }
 265 }
 266
 267 /* Performant mode intr_mask */
 268 static void SA5_performant_intr_mask(ctlr_info_t *h, unsigned long val)
 269 {
 270         if (val) { /* turn on interrupts */
 271                 h->interrupts_enabled = 1;
 272                 writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 273         } else {
 274                 h->interrupts_enabled = 0;
 275                 writel(SA5_PERF_INTR_OFF,
 276                                 h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 277         }
 278 }
 279
 280 /*
 281  *  Returns true if fifo is full.
 282  *
 283  */
 284 static unsigned long SA5_fifo_full(ctlr_info_t *h)
 285 {
 286         if( h->commands_outstanding >= h->max_commands)
 287                 return(1);
 288         else
 289                 return(0);
 290
 291 }
 292 /*
 293  *   returns value read from hardware.
 294  *     returns FIFO_EMPTY if there is nothing to read
 295  */
 296 static unsigned long SA5_completed(ctlr_info_t *h)
 297 {
 298         unsigned long register_value
 299                 = readl(h->vaddr + SA5_REPLY_PORT_OFFSET);
 300         if(register_value != FIFO_EMPTY)
 301         {
 302                 h->commands_outstanding--;
 303 #ifdef CCISS_DEBUG
 304                 printk("cciss:  Read %lx back from board\n", register_value);
 305 #endif /* CCISS_DEBUG */
 306         }
 307 #ifdef CCISS_DEBUG
 308         else
 309         {
 310                 printk("cciss:  FIFO Empty read\n");
 311         }
 312 #endif
 313         return ( register_value);
 314
 315 }
 316
 317 /* Performant mode command completed */
 318 static unsigned long SA5_performant_completed(ctlr_info_t *h)
 319 {
 320         unsigned long register_value = FIFO_EMPTY;
 321
 322         /* flush the controller write of the reply queue by reading
 323          * outbound doorbell status register.
 324          */
 325         register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
 326         /* msi auto clears the interrupt pending bit. */
 327         if (!(h->msi_vector || h->msix_vector)) {
 328                 writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR);
 329                 /* Do a read in order to flush the write to the controller
 330                  * (as per spec.)
 331                  */
 332                 register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
 333         }
 334
 335         if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
 336                 register_value = *(h->reply_pool_head);
 337                 (h->reply_pool_head)++;
 338                 h->commands_outstanding--;
 339         } else {
 340                 register_value = FIFO_EMPTY;
 341         }
 342         /* Check for wraparound */
 343         if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
 344                 h->reply_pool_head = h->reply_pool;
 345                 h->reply_pool_wraparound ^= 1;
 346         }
 347
 348         return register_value;
 349 }
 350 /*
 351  *      Returns true if an interrupt is pending..
 352  */
 353 static bool SA5_intr_pending(ctlr_info_t *h)
 354 {
 355         unsigned long register_value  =
 356                 readl(h->vaddr + SA5_INTR_STATUS);
 357 #ifdef CCISS_DEBUG
 358         printk("cciss: intr_pending %lx\n", register_value);
 359 #endif  /* CCISS_DEBUG */
 360         if( register_value &  SA5_INTR_PENDING)
 361                 return  1;
 362         return 0 ;
 363 }
 364
 365 /*
 366  *      Returns true if an interrupt is pending..
 367  */
 368 static bool SA5B_intr_pending(ctlr_info_t *h)
 369 {
 370         unsigned long register_value  =
 371                 readl(h->vaddr + SA5_INTR_STATUS);
 372 #ifdef CCISS_DEBUG
 373         printk("cciss: intr_pending %lx\n", register_value);
 374 #endif  /* CCISS_DEBUG */
 375         if( register_value &  SA5B_INTR_PENDING)
 376                 return  1;
 377         return 0 ;
 378 }
 379
 380 static bool SA5_performant_intr_pending(ctlr_info_t *h)
 381 {
 382         unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);
 383
 384         if (!register_value)
 385                 return false;
 386
 387         if (h->msi_vector || h->msix_vector)
 388                 return true;
 389
 390         /* Read outbound doorbell to flush */
 391         register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
 392         return register_value & SA5_OUTDB_STATUS_PERF_BIT;
 393 }
 394
 395 static struct access_method SA5_access = {
 396         SA5_submit_command,
 397         SA5_intr_mask,
 398         SA5_fifo_full,
 399         SA5_intr_pending,
 400         SA5_completed,
 401 };
 402
 403 static struct access_method SA5B_access = {
 404         SA5_submit_command,
 405         SA5B_intr_mask,
 406         SA5_fifo_full,
 407         SA5B_intr_pending,
 408         SA5_completed,
 409 };
 410
 411 static struct access_method SA5_performant_access = {
 412         SA5_submit_command,
 413         SA5_performant_intr_mask,
 414         SA5_fifo_full,
 415         SA5_performant_intr_pending,
 416         SA5_performant_completed,
 417 };
 418
 419 struct board_type {
 420         __u32   board_id;
 421         char    *product_name;
 422         struct access_method *access;
 423         int nr_cmds; /* Max cmds this kind of ctlr can handle. */
 424 };
 425
 426 #endif /* CCISS_H */