nfsd: Use write gathering only with NFSv2
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / rtc / rtc-au1xxx.c
blob979ed0406ce9141557bb4eaba23daca9b1fb1f32
1 /*
2 * Au1xxx counter0 (aka Time-Of-Year counter) RTC interface driver.
4 * Copyright (C) 2008 Manuel Lauss <mano@roarinelk.homelinux.net>
6 * This file is subject to the terms and conditions of the GNU General Public
7 * License. See the file "COPYING" in the main directory of this archive
8 * for more details.
9 */
11 /* All current Au1xxx SoCs have 2 counters fed by an external 32.768 kHz
12 * crystal. Counter 0, which keeps counting during sleep/powerdown, is
13 * used to count seconds since the beginning of the unix epoch.
15 * The counters must be configured and enabled by bootloader/board code;
16 * no checks as to whether they really get a proper 32.768kHz clock are
17 * made as this would take far too long.
20 #include <linux/module.h>
21 #include <linux/kernel.h>
22 #include <linux/rtc.h>
23 #include <linux/init.h>
24 #include <linux/platform_device.h>
25 #include <linux/io.h>
26 #include <asm/mach-au1x00/au1000.h>
28 /* 32kHz clock enabled and detected */
29 #define CNTR_OK (SYS_CNTRL_E0 | SYS_CNTRL_32S)
31 static int au1xtoy_rtc_read_time(struct device *dev, struct rtc_time *tm)
33 unsigned long t;
35 t = au_readl(SYS_TOYREAD);
37 rtc_time_to_tm(t, tm);
39 return rtc_valid_tm(tm);
42 static int au1xtoy_rtc_set_time(struct device *dev, struct rtc_time *tm)
44 unsigned long t;
46 rtc_tm_to_time(tm, &t);
48 au_writel(t, SYS_TOYWRITE);
49 au_sync();
51 /* wait for the pending register write to succeed. This can
52 * take up to 6 seconds...
54 while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S)
55 msleep(1);
57 return 0;
60 static struct rtc_class_ops au1xtoy_rtc_ops = {
61 .read_time = au1xtoy_rtc_read_time,
62 .set_time = au1xtoy_rtc_set_time,
65 static int __devinit au1xtoy_rtc_probe(struct platform_device *pdev)
67 struct rtc_device *rtcdev;
68 unsigned long t;
69 int ret;
71 t = au_readl(SYS_COUNTER_CNTRL);
72 if (!(t & CNTR_OK)) {
73 dev_err(&pdev->dev, "counters not working; aborting.\n");
74 ret = -ENODEV;
75 goto out_err;
78 ret = -ETIMEDOUT;
80 /* set counter0 tickrate to 1Hz if necessary */
81 if (au_readl(SYS_TOYTRIM) != 32767) {
82 /* wait until hardware gives access to TRIM register */
83 t = 0x00100000;
84 while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S) && --t)
85 msleep(1);
87 if (!t) {
88 /* timed out waiting for register access; assume
89 * counters are unusable.
91 dev_err(&pdev->dev, "timeout waiting for access\n");
92 goto out_err;
95 /* set 1Hz TOY tick rate */
96 au_writel(32767, SYS_TOYTRIM);
97 au_sync();
100 /* wait until the hardware allows writes to the counter reg */
101 while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S)
102 msleep(1);
104 rtcdev = rtc_device_register("rtc-au1xxx", &pdev->dev,
105 &au1xtoy_rtc_ops, THIS_MODULE);
106 if (IS_ERR(rtcdev)) {
107 ret = PTR_ERR(rtcdev);
108 goto out_err;
111 platform_set_drvdata(pdev, rtcdev);
113 return 0;
115 out_err:
116 return ret;
119 static int __devexit au1xtoy_rtc_remove(struct platform_device *pdev)
121 struct rtc_device *rtcdev = platform_get_drvdata(pdev);
123 rtc_device_unregister(rtcdev);
124 platform_set_drvdata(pdev, NULL);
126 return 0;
129 static struct platform_driver au1xrtc_driver = {
130 .driver = {
131 .name = "rtc-au1xxx",
132 .owner = THIS_MODULE,
134 .remove = __devexit_p(au1xtoy_rtc_remove),
137 static int __init au1xtoy_rtc_init(void)
139 return platform_driver_probe(&au1xrtc_driver, au1xtoy_rtc_probe);
142 static void __exit au1xtoy_rtc_exit(void)
144 platform_driver_unregister(&au1xrtc_driver);
147 module_init(au1xtoy_rtc_init);
148 module_exit(au1xtoy_rtc_exit);
150 MODULE_DESCRIPTION("Au1xxx TOY-counter-based RTC driver");
151 MODULE_AUTHOR("Manuel Lauss <manuel.lauss@gmail.com>");
152 MODULE_LICENSE("GPL");
153 MODULE_ALIAS("platform:rtc-au1xxx");