2 * Driver for the Atmel on-chip Audio Bitstream DAC (ABDAC)
4 * Copyright (C) 2006-2009 Atmel Corporation
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published by
8 * the Free Software Foundation.
10 #include <linux/clk.h>
11 #include <linux/bitmap.h>
12 #include <linux/dw_dmac.h>
13 #include <linux/dmaengine.h>
14 #include <linux/dma-mapping.h>
15 #include <linux/init.h>
16 #include <linux/interrupt.h>
17 #include <linux/module.h>
18 #include <linux/platform_device.h>
19 #include <linux/types.h>
22 #include <sound/core.h>
23 #include <sound/initval.h>
24 #include <sound/pcm.h>
25 #include <sound/pcm_params.h>
26 #include <sound/atmel-abdac.h>
28 /* DAC register offsets */
29 #define DAC_DATA 0x0000
30 #define DAC_CTRL 0x0008
31 #define DAC_INT_MASK 0x000c
32 #define DAC_INT_EN 0x0010
33 #define DAC_INT_DIS 0x0014
34 #define DAC_INT_CLR 0x0018
35 #define DAC_INT_STATUS 0x001c
37 /* Bitfields in CTRL */
38 #define DAC_SWAP_OFFSET 30
39 #define DAC_SWAP_SIZE 1
40 #define DAC_EN_OFFSET 31
43 /* Bitfields in INT_MASK/INT_EN/INT_DIS/INT_STATUS/INT_CLR */
44 #define DAC_UNDERRUN_OFFSET 28
45 #define DAC_UNDERRUN_SIZE 1
46 #define DAC_TX_READY_OFFSET 29
47 #define DAC_TX_READY_SIZE 1
49 /* Bit manipulation macros */
50 #define DAC_BIT(name) \
51 (1 << DAC_##name##_OFFSET)
52 #define DAC_BF(name, value) \
53 (((value) & ((1 << DAC_##name##_SIZE) - 1)) \
54 << DAC_##name##_OFFSET)
55 #define DAC_BFEXT(name, value) \
56 (((value) >> DAC_##name##_OFFSET) \
57 & ((1 << DAC_##name##_SIZE) - 1))
58 #define DAC_BFINS(name, value, old) \
59 (((old) & ~(((1 << DAC_##name##_SIZE) - 1) \
60 << DAC_##name##_OFFSET)) \
61 | DAC_BF(name, value))
63 /* Register access macros */
64 #define dac_readl(port, reg) \
65 __raw_readl((port)->regs + DAC_##reg)
66 #define dac_writel(port, reg, value) \
67 __raw_writel((value), (port)->regs + DAC_##reg)
70 * ABDAC supports a maximum of 6 different rates from a generic clock. The
71 * generic clock has a power of two divider, which gives 6 steps from 192 kHz
74 #define MAX_NUM_RATES 6
75 /* ALSA seems to use rates between 192000 Hz and 5112 Hz. */
76 #define RATE_MAX 192000
83 struct atmel_abdac_dma
{
84 struct dma_chan
*chan
;
85 struct dw_cyclic_desc
*cdesc
;
90 struct clk
*sample_clk
;
91 struct platform_device
*pdev
;
92 struct atmel_abdac_dma dma
;
94 struct snd_pcm_hw_constraint_list constraints_rates
;
95 struct snd_pcm_substream
*substream
;
96 struct snd_card
*card
;
101 unsigned int rates
[MAX_NUM_RATES
];
102 unsigned int rates_num
;
106 #define get_dac(card) ((struct atmel_abdac *)(card)->private_data)
108 /* This function is called by the DMA driver. */
109 static void atmel_abdac_dma_period_done(void *arg
)
111 struct atmel_abdac
*dac
= arg
;
112 snd_pcm_period_elapsed(dac
->substream
);
115 static int atmel_abdac_prepare_dma(struct atmel_abdac
*dac
,
116 struct snd_pcm_substream
*substream
,
117 enum dma_data_direction direction
)
119 struct dma_chan
*chan
= dac
->dma
.chan
;
120 struct dw_cyclic_desc
*cdesc
;
121 struct snd_pcm_runtime
*runtime
= substream
->runtime
;
122 unsigned long buffer_len
, period_len
;
125 * We don't do DMA on "complex" transfers, i.e. with
126 * non-halfword-aligned buffers or lengths.
128 if (runtime
->dma_addr
& 1 || runtime
->buffer_size
& 1) {
129 dev_dbg(&dac
->pdev
->dev
, "too complex transfer\n");
133 buffer_len
= frames_to_bytes(runtime
, runtime
->buffer_size
);
134 period_len
= frames_to_bytes(runtime
, runtime
->period_size
);
136 cdesc
= dw_dma_cyclic_prep(chan
, runtime
->dma_addr
, buffer_len
,
137 period_len
, DMA_MEM_TO_DEV
);
139 dev_dbg(&dac
->pdev
->dev
, "could not prepare cyclic DMA\n");
140 return PTR_ERR(cdesc
);
143 cdesc
->period_callback
= atmel_abdac_dma_period_done
;
144 cdesc
->period_callback_param
= dac
;
146 dac
->dma
.cdesc
= cdesc
;
148 set_bit(DMA_READY
, &dac
->flags
);
153 static struct snd_pcm_hardware atmel_abdac_hw
= {
154 .info
= (SNDRV_PCM_INFO_MMAP
155 | SNDRV_PCM_INFO_MMAP_VALID
156 | SNDRV_PCM_INFO_INTERLEAVED
157 | SNDRV_PCM_INFO_BLOCK_TRANSFER
158 | SNDRV_PCM_INFO_RESUME
159 | SNDRV_PCM_INFO_PAUSE
),
160 .formats
= (SNDRV_PCM_FMTBIT_S16_BE
),
161 .rates
= (SNDRV_PCM_RATE_KNOT
),
162 .rate_min
= RATE_MIN
,
163 .rate_max
= RATE_MAX
,
166 .buffer_bytes_max
= 64 * 4096,
167 .period_bytes_min
= 4096,
168 .period_bytes_max
= 4096,
173 static int atmel_abdac_open(struct snd_pcm_substream
*substream
)
175 struct atmel_abdac
*dac
= snd_pcm_substream_chip(substream
);
177 dac
->substream
= substream
;
178 atmel_abdac_hw
.rate_max
= dac
->rates
[dac
->rates_num
- 1];
179 atmel_abdac_hw
.rate_min
= dac
->rates
[0];
180 substream
->runtime
->hw
= atmel_abdac_hw
;
182 return snd_pcm_hw_constraint_list(substream
->runtime
, 0,
183 SNDRV_PCM_HW_PARAM_RATE
, &dac
->constraints_rates
);
186 static int atmel_abdac_close(struct snd_pcm_substream
*substream
)
188 struct atmel_abdac
*dac
= snd_pcm_substream_chip(substream
);
189 dac
->substream
= NULL
;
193 static int atmel_abdac_hw_params(struct snd_pcm_substream
*substream
,
194 struct snd_pcm_hw_params
*hw_params
)
196 struct atmel_abdac
*dac
= snd_pcm_substream_chip(substream
);
199 retval
= snd_pcm_lib_malloc_pages(substream
,
200 params_buffer_bytes(hw_params
));
203 /* snd_pcm_lib_malloc_pages returns 1 if buffer is changed. */
205 if (test_and_clear_bit(DMA_READY
, &dac
->flags
))
206 dw_dma_cyclic_free(dac
->dma
.chan
);
211 static int atmel_abdac_hw_free(struct snd_pcm_substream
*substream
)
213 struct atmel_abdac
*dac
= snd_pcm_substream_chip(substream
);
214 if (test_and_clear_bit(DMA_READY
, &dac
->flags
))
215 dw_dma_cyclic_free(dac
->dma
.chan
);
216 return snd_pcm_lib_free_pages(substream
);
219 static int atmel_abdac_prepare(struct snd_pcm_substream
*substream
)
221 struct atmel_abdac
*dac
= snd_pcm_substream_chip(substream
);
224 retval
= clk_set_rate(dac
->sample_clk
, 256 * substream
->runtime
->rate
);
228 if (!test_bit(DMA_READY
, &dac
->flags
))
229 retval
= atmel_abdac_prepare_dma(dac
, substream
, DMA_TO_DEVICE
);
234 static int atmel_abdac_trigger(struct snd_pcm_substream
*substream
, int cmd
)
236 struct atmel_abdac
*dac
= snd_pcm_substream_chip(substream
);
240 case SNDRV_PCM_TRIGGER_PAUSE_RELEASE
: /* fall through */
241 case SNDRV_PCM_TRIGGER_RESUME
: /* fall through */
242 case SNDRV_PCM_TRIGGER_START
:
243 clk_enable(dac
->sample_clk
);
244 retval
= dw_dma_cyclic_start(dac
->dma
.chan
);
247 dac_writel(dac
, CTRL
, DAC_BIT(EN
));
249 case SNDRV_PCM_TRIGGER_PAUSE_PUSH
: /* fall through */
250 case SNDRV_PCM_TRIGGER_SUSPEND
: /* fall through */
251 case SNDRV_PCM_TRIGGER_STOP
:
252 dw_dma_cyclic_stop(dac
->dma
.chan
);
253 dac_writel(dac
, DATA
, 0);
254 dac_writel(dac
, CTRL
, 0);
255 clk_disable(dac
->sample_clk
);
265 static snd_pcm_uframes_t
266 atmel_abdac_pointer(struct snd_pcm_substream
*substream
)
268 struct atmel_abdac
*dac
= snd_pcm_substream_chip(substream
);
269 struct snd_pcm_runtime
*runtime
= substream
->runtime
;
270 snd_pcm_uframes_t frames
;
273 bytes
= dw_dma_get_src_addr(dac
->dma
.chan
);
274 bytes
-= runtime
->dma_addr
;
276 frames
= bytes_to_frames(runtime
, bytes
);
277 if (frames
>= runtime
->buffer_size
)
278 frames
-= runtime
->buffer_size
;
283 static irqreturn_t
abdac_interrupt(int irq
, void *dev_id
)
285 struct atmel_abdac
*dac
= dev_id
;
288 status
= dac_readl(dac
, INT_STATUS
);
289 if (status
& DAC_BIT(UNDERRUN
)) {
290 dev_err(&dac
->pdev
->dev
, "underrun detected\n");
291 dac_writel(dac
, INT_CLR
, DAC_BIT(UNDERRUN
));
293 dev_err(&dac
->pdev
->dev
, "spurious interrupt (status=0x%x)\n",
295 dac_writel(dac
, INT_CLR
, status
);
301 static struct snd_pcm_ops atmel_abdac_ops
= {
302 .open
= atmel_abdac_open
,
303 .close
= atmel_abdac_close
,
304 .ioctl
= snd_pcm_lib_ioctl
,
305 .hw_params
= atmel_abdac_hw_params
,
306 .hw_free
= atmel_abdac_hw_free
,
307 .prepare
= atmel_abdac_prepare
,
308 .trigger
= atmel_abdac_trigger
,
309 .pointer
= atmel_abdac_pointer
,
312 static int atmel_abdac_pcm_new(struct atmel_abdac
*dac
)
314 struct snd_pcm_hardware hw
= atmel_abdac_hw
;
318 retval
= snd_pcm_new(dac
->card
, dac
->card
->shortname
,
319 dac
->pdev
->id
, 1, 0, &pcm
);
323 strcpy(pcm
->name
, dac
->card
->shortname
);
324 pcm
->private_data
= dac
;
328 snd_pcm_set_ops(pcm
, SNDRV_PCM_STREAM_PLAYBACK
, &atmel_abdac_ops
);
330 retval
= snd_pcm_lib_preallocate_pages_for_all(pcm
, SNDRV_DMA_TYPE_DEV
,
331 &dac
->pdev
->dev
, hw
.periods_min
* hw
.period_bytes_min
,
332 hw
.buffer_bytes_max
);
337 static bool filter(struct dma_chan
*chan
, void *slave
)
339 struct dw_dma_slave
*dws
= slave
;
341 if (dws
->dma_dev
== chan
->device
->dev
) {
348 static int set_sample_rates(struct atmel_abdac
*dac
)
350 long new_rate
= RATE_MAX
;
351 int retval
= -EINVAL
;
354 /* we start at 192 kHz and work our way down to 5112 Hz */
355 while (new_rate
>= RATE_MIN
&& index
< (MAX_NUM_RATES
+ 1)) {
356 new_rate
= clk_round_rate(dac
->sample_clk
, 256 * new_rate
);
359 /* make sure we are below the ABDAC clock */
360 if (new_rate
<= clk_get_rate(dac
->pclk
)) {
361 dac
->rates
[index
] = new_rate
/ 256;
364 /* divide by 256 and then by two to get next rate */
371 /* reverse array, smallest go first */
372 for (i
= 0; i
< (index
/ 2); i
++) {
373 unsigned int tmp
= dac
->rates
[index
- 1 - i
];
374 dac
->rates
[index
- 1 - i
] = dac
->rates
[i
];
378 dac
->constraints_rates
.count
= index
;
379 dac
->constraints_rates
.list
= dac
->rates
;
380 dac
->constraints_rates
.mask
= 0;
381 dac
->rates_num
= index
;
389 static int atmel_abdac_probe(struct platform_device
*pdev
)
391 struct snd_card
*card
;
392 struct atmel_abdac
*dac
;
393 struct resource
*regs
;
394 struct atmel_abdac_pdata
*pdata
;
396 struct clk
*sample_clk
;
400 regs
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
402 dev_dbg(&pdev
->dev
, "no memory resource\n");
406 irq
= platform_get_irq(pdev
, 0);
408 dev_dbg(&pdev
->dev
, "could not get IRQ number\n");
412 pdata
= pdev
->dev
.platform_data
;
414 dev_dbg(&pdev
->dev
, "no platform data\n");
418 pclk
= clk_get(&pdev
->dev
, "pclk");
420 dev_dbg(&pdev
->dev
, "no peripheral clock\n");
421 return PTR_ERR(pclk
);
423 sample_clk
= clk_get(&pdev
->dev
, "sample_clk");
424 if (IS_ERR(sample_clk
)) {
425 dev_dbg(&pdev
->dev
, "no sample clock\n");
426 retval
= PTR_ERR(sample_clk
);
431 retval
= snd_card_create(SNDRV_DEFAULT_IDX1
, SNDRV_DEFAULT_STR1
,
432 THIS_MODULE
, sizeof(struct atmel_abdac
), &card
);
434 dev_dbg(&pdev
->dev
, "could not create sound card device\n");
435 goto out_put_sample_clk
;
443 dac
->sample_clk
= sample_clk
;
446 retval
= set_sample_rates(dac
);
448 dev_dbg(&pdev
->dev
, "could not set supported rates\n");
452 dac
->regs
= ioremap(regs
->start
, resource_size(regs
));
454 dev_dbg(&pdev
->dev
, "could not remap register memory\n");
459 /* make sure the DAC is silent and disabled */
460 dac_writel(dac
, DATA
, 0);
461 dac_writel(dac
, CTRL
, 0);
463 retval
= request_irq(irq
, abdac_interrupt
, 0, "abdac", dac
);
465 dev_dbg(&pdev
->dev
, "could not request irq\n");
469 snd_card_set_dev(card
, &pdev
->dev
);
471 if (pdata
->dws
.dma_dev
) {
475 dma_cap_set(DMA_SLAVE
, mask
);
477 dac
->dma
.chan
= dma_request_channel(mask
, filter
, &pdata
->dws
);
479 struct dma_slave_config dma_conf
= {
480 .dst_addr
= regs
->start
+ DAC_DATA
,
481 .dst_addr_width
= DMA_SLAVE_BUSWIDTH_4_BYTES
,
484 .direction
= DMA_MEM_TO_DEV
,
488 dmaengine_slave_config(dac
->dma
.chan
, &dma_conf
);
491 if (!pdata
->dws
.dma_dev
|| !dac
->dma
.chan
) {
492 dev_dbg(&pdev
->dev
, "DMA not available\n");
494 goto out_unset_card_dev
;
497 strcpy(card
->driver
, "Atmel ABDAC");
498 strcpy(card
->shortname
, "Atmel ABDAC");
499 sprintf(card
->longname
, "Atmel Audio Bitstream DAC");
501 retval
= atmel_abdac_pcm_new(dac
);
503 dev_dbg(&pdev
->dev
, "could not register ABDAC pcm device\n");
504 goto out_release_dma
;
507 retval
= snd_card_register(card
);
509 dev_dbg(&pdev
->dev
, "could not register sound card\n");
510 goto out_release_dma
;
513 platform_set_drvdata(pdev
, card
);
515 dev_info(&pdev
->dev
, "Atmel ABDAC at 0x%p using %s\n",
516 dac
->regs
, dev_name(&dac
->dma
.chan
->dev
->device
));
521 dma_release_channel(dac
->dma
.chan
);
522 dac
->dma
.chan
= NULL
;
524 snd_card_set_dev(card
, NULL
);
538 #ifdef CONFIG_PM_SLEEP
539 static int atmel_abdac_suspend(struct device
*pdev
)
541 struct snd_card
*card
= dev_get_drvdata(pdev
);
542 struct atmel_abdac
*dac
= card
->private_data
;
544 dw_dma_cyclic_stop(dac
->dma
.chan
);
545 clk_disable(dac
->sample_clk
);
546 clk_disable(dac
->pclk
);
551 static int atmel_abdac_resume(struct device
*pdev
)
553 struct snd_card
*card
= dev_get_drvdata(pdev
);
554 struct atmel_abdac
*dac
= card
->private_data
;
556 clk_enable(dac
->pclk
);
557 clk_enable(dac
->sample_clk
);
558 if (test_bit(DMA_READY
, &dac
->flags
))
559 dw_dma_cyclic_start(dac
->dma
.chan
);
564 static SIMPLE_DEV_PM_OPS(atmel_abdac_pm
, atmel_abdac_suspend
, atmel_abdac_resume
);
565 #define ATMEL_ABDAC_PM_OPS &atmel_abdac_pm
567 #define ATMEL_ABDAC_PM_OPS NULL
570 static int atmel_abdac_remove(struct platform_device
*pdev
)
572 struct snd_card
*card
= platform_get_drvdata(pdev
);
573 struct atmel_abdac
*dac
= get_dac(card
);
575 clk_put(dac
->sample_clk
);
576 clk_disable(dac
->pclk
);
579 dma_release_channel(dac
->dma
.chan
);
580 dac
->dma
.chan
= NULL
;
581 snd_card_set_dev(card
, NULL
);
583 free_irq(dac
->irq
, dac
);
586 platform_set_drvdata(pdev
, NULL
);
591 static struct platform_driver atmel_abdac_driver
= {
592 .remove
= atmel_abdac_remove
,
594 .name
= "atmel_abdac",
595 .owner
= THIS_MODULE
,
596 .pm
= ATMEL_ABDAC_PM_OPS
,
600 static int __init
atmel_abdac_init(void)
602 return platform_driver_probe(&atmel_abdac_driver
,
605 module_init(atmel_abdac_init
);
607 static void __exit
atmel_abdac_exit(void)
609 platform_driver_unregister(&atmel_abdac_driver
);
611 module_exit(atmel_abdac_exit
);
613 MODULE_LICENSE("GPL");
614 MODULE_DESCRIPTION("Driver for Atmel Audio Bitstream DAC (ABDAC)");
615 MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");