2 * Copyright (C) Freescale Semicondutor, Inc. 2006-2007. All rights reserved.
4 * Author: Andy Fleming <afleming@freescale.com>
6 * Based on 83xx/mpc8360e_pb.c by:
7 * Li Yang <LeoLi@freescale.com>
8 * Yin Olivia <Hong-hua.Yin@freescale.com>
11 * MPC85xx MDS board specific routines.
13 * This program is free software; you can redistribute it and/or modify it
14 * under the terms of the GNU General Public License as published by the
15 * Free Software Foundation; either version 2 of the License, or (at your
16 * option) any later version.
19 #include <linux/stddef.h>
20 #include <linux/kernel.h>
21 #include <linux/init.h>
22 #include <linux/errno.h>
23 #include <linux/reboot.h>
24 #include <linux/pci.h>
25 #include <linux/kdev_t.h>
26 #include <linux/major.h>
27 #include <linux/console.h>
28 #include <linux/delay.h>
29 #include <linux/seq_file.h>
30 #include <linux/initrd.h>
31 #include <linux/module.h>
32 #include <linux/fsl_devices.h>
33 #include <linux/of_platform.h>
34 #include <linux/of_device.h>
35 #include <linux/phy.h>
36 #include <linux/lmb.h>
38 #include <asm/system.h>
39 #include <asm/atomic.h>
42 #include <asm/machdep.h>
43 #include <asm/pci-bridge.h>
45 #include <mm/mmu_decl.h>
48 #include <sysdev/fsl_soc.h>
49 #include <sysdev/fsl_pci.h>
50 #include <sysdev/simple_gpio.h>
52 #include <asm/qe_ic.h>
54 #include <asm/swiotlb.h>
58 #define DBG(fmt...) udbg_printf(fmt)
63 #define MV88E1111_SCR 0x10
64 #define MV88E1111_SCR_125CLK 0x0010
65 static int mpc8568_fixup_125_clock(struct phy_device
*phydev
)
70 /* Workaround for the 125 CLK Toggle */
71 scr
= phy_read(phydev
, MV88E1111_SCR
);
76 err
= phy_write(phydev
, MV88E1111_SCR
, scr
& ~(MV88E1111_SCR_125CLK
));
81 err
= phy_write(phydev
, MII_BMCR
, BMCR_RESET
);
86 scr
= phy_read(phydev
, MV88E1111_SCR
);
91 err
= phy_write(phydev
, MV88E1111_SCR
, scr
| 0x0008);
96 static int mpc8568_mds_phy_fixups(struct phy_device
*phydev
)
102 err
= phy_write(phydev
,29, 0x0006);
107 temp
= phy_read(phydev
, 30);
112 temp
= (temp
& (~0x8000)) | 0x4000;
113 err
= phy_write(phydev
,30, temp
);
118 err
= phy_write(phydev
,29, 0x000a);
123 temp
= phy_read(phydev
, 30);
128 temp
= phy_read(phydev
, 30);
135 err
= phy_write(phydev
,30,temp
);
140 /* Disable automatic MDI/MDIX selection */
141 temp
= phy_read(phydev
, 16);
147 err
= phy_write(phydev
,16,temp
);
152 /* ************************************************************************
154 * Setup the architecture
157 static void __init
mpc85xx_mds_setup_arch(void)
159 struct device_node
*np
;
160 static u8 __iomem
*bcsr_regs
= NULL
;
162 struct pci_controller
*hose
;
164 dma_addr_t max
= 0xffffffff;
167 ppc_md
.progress("mpc85xx_mds_setup_arch()", 0);
170 np
= of_find_node_by_name(NULL
, "bcsr");
174 of_address_to_resource(np
, 0, &res
);
175 bcsr_regs
= ioremap(res
.start
, res
.end
- res
.start
+1);
180 for_each_node_by_type(np
, "pci") {
181 if (of_device_is_compatible(np
, "fsl,mpc8540-pci") ||
182 of_device_is_compatible(np
, "fsl,mpc8548-pcie")) {
183 struct resource rsrc
;
184 of_address_to_resource(np
, 0, &rsrc
);
185 if ((rsrc
.start
& 0xfffff) == 0x8000)
186 fsl_add_bridge(np
, 1);
188 fsl_add_bridge(np
, 0);
190 hose
= pci_find_hose_for_OF_device(np
);
191 max
= min(max
, hose
->dma_window_base_cur
+
192 hose
->dma_window_size
);
197 #ifdef CONFIG_QUICC_ENGINE
198 np
= of_find_compatible_node(NULL
, NULL
, "fsl,qe");
200 np
= of_find_node_by_name(NULL
, "qe");
208 np
= of_find_node_by_name(NULL
, "par_io");
210 struct device_node
*ucc
;
215 for_each_node_by_name(ucc
, "ucc")
216 par_io_of_config(ucc
);
220 if (machine_is(mpc8568_mds
)) {
221 #define BCSR_UCC1_GETH_EN (0x1 << 7)
222 #define BCSR_UCC2_GETH_EN (0x1 << 7)
223 #define BCSR_UCC1_MODE_MSK (0x3 << 4)
224 #define BCSR_UCC2_MODE_MSK (0x3 << 0)
226 /* Turn off UCC1 & UCC2 */
227 clrbits8(&bcsr_regs
[8], BCSR_UCC1_GETH_EN
);
228 clrbits8(&bcsr_regs
[9], BCSR_UCC2_GETH_EN
);
230 /* Mode is RGMII, all bits clear */
231 clrbits8(&bcsr_regs
[11], BCSR_UCC1_MODE_MSK
|
234 /* Turn UCC1 & UCC2 on */
235 setbits8(&bcsr_regs
[8], BCSR_UCC1_GETH_EN
);
236 setbits8(&bcsr_regs
[9], BCSR_UCC2_GETH_EN
);
237 } else if (machine_is(mpc8569_mds
)) {
238 #define BCSR7_UCC12_GETHnRST (0x1 << 2)
239 #define BCSR8_UEM_MARVELL_RST (0x1 << 1)
240 #define BCSR_UCC_RGMII (0x1 << 6)
241 #define BCSR_UCC_RTBI (0x1 << 5)
243 * U-Boot mangles interrupt polarity for Marvell PHYs,
244 * so reset built-in and UEM Marvell PHYs, this puts
245 * the PHYs into their normal state.
247 clrbits8(&bcsr_regs
[7], BCSR7_UCC12_GETHnRST
);
248 setbits8(&bcsr_regs
[8], BCSR8_UEM_MARVELL_RST
);
250 setbits8(&bcsr_regs
[7], BCSR7_UCC12_GETHnRST
);
251 clrbits8(&bcsr_regs
[8], BCSR8_UEM_MARVELL_RST
);
253 for (np
= NULL
; (np
= of_find_compatible_node(np
,
255 "ucc_geth")) != NULL
;) {
256 const unsigned int *prop
;
259 prop
= of_get_property(np
, "cell-index", NULL
);
265 prop
= of_get_property(np
, "phy-connection-type", NULL
);
269 if (strcmp("rtbi", (const char *)prop
) == 0)
270 clrsetbits_8(&bcsr_regs
[7 + ucc_num
],
271 BCSR_UCC_RGMII
, BCSR_UCC_RTBI
);
277 #endif /* CONFIG_QUICC_ENGINE */
279 #ifdef CONFIG_SWIOTLB
280 if (lmb_end_of_DRAM() > max
) {
281 ppc_swiotlb_enable
= 1;
282 set_pci_dma_ops(&swiotlb_dma_ops
);
283 ppc_md
.pci_dma_dev_setup
= pci_dma_dev_setup_swiotlb
;
289 static int __init
board_fixups(void)
292 char *compstrs
[2] = {"fsl,gianfar-mdio", "fsl,ucc-mdio"};
293 struct device_node
*mdio
;
297 for (i
= 0; i
< ARRAY_SIZE(compstrs
); i
++) {
298 mdio
= of_find_compatible_node(NULL
, NULL
, compstrs
[i
]);
300 of_address_to_resource(mdio
, 0, &res
);
301 snprintf(phy_id
, sizeof(phy_id
), "%llx:%02x",
302 (unsigned long long)res
.start
, 1);
304 phy_register_fixup_for_id(phy_id
, mpc8568_fixup_125_clock
);
305 phy_register_fixup_for_id(phy_id
, mpc8568_mds_phy_fixups
);
307 /* Register a workaround for errata */
308 snprintf(phy_id
, sizeof(phy_id
), "%llx:%02x",
309 (unsigned long long)res
.start
, 7);
310 phy_register_fixup_for_id(phy_id
, mpc8568_mds_phy_fixups
);
317 machine_arch_initcall(mpc8568_mds
, board_fixups
);
318 machine_arch_initcall(mpc8569_mds
, board_fixups
);
320 static struct of_device_id mpc85xx_ids
[] = {
322 { .compatible
= "soc", },
323 { .compatible
= "simple-bus", },
325 { .compatible
= "fsl,qe", },
326 { .compatible
= "gianfar", },
327 { .compatible
= "fsl,rapidio-delta", },
328 { .compatible
= "fsl,mpc8548-guts", },
329 { .compatible
= "gpio-leds", },
333 static int __init
mpc85xx_publish_devices(void)
335 if (machine_is(mpc8568_mds
))
336 simple_gpiochip_init("fsl,mpc8568mds-bcsr-gpio");
337 if (machine_is(mpc8569_mds
))
338 simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
340 /* Publish the QE devices */
341 of_platform_bus_probe(NULL
, mpc85xx_ids
, NULL
);
345 machine_device_initcall(mpc8568_mds
, mpc85xx_publish_devices
);
346 machine_device_initcall(mpc8569_mds
, mpc85xx_publish_devices
);
348 machine_arch_initcall(mpc8568_mds
, swiotlb_setup_bus_notifier
);
349 machine_arch_initcall(mpc8569_mds
, swiotlb_setup_bus_notifier
);
351 static void __init
mpc85xx_mds_pic_init(void)
355 struct device_node
*np
= NULL
;
357 np
= of_find_node_by_type(NULL
, "open-pic");
361 if (of_address_to_resource(np
, 0, &r
)) {
362 printk(KERN_ERR
"Failed to map mpic register space\n");
367 mpic
= mpic_alloc(np
, r
.start
,
368 MPIC_PRIMARY
| MPIC_WANTS_RESET
| MPIC_BIG_ENDIAN
|
369 MPIC_BROKEN_FRR_NIRQS
,
370 0, 256, " OpenPIC ");
371 BUG_ON(mpic
== NULL
);
376 #ifdef CONFIG_QUICC_ENGINE
377 np
= of_find_compatible_node(NULL
, NULL
, "fsl,qe-ic");
379 np
= of_find_node_by_type(NULL
, "qeic");
383 qe_ic_init(np
, 0, qe_ic_cascade_muxed_mpic
, NULL
);
385 #endif /* CONFIG_QUICC_ENGINE */
388 static int __init
mpc85xx_mds_probe(void)
390 unsigned long root
= of_get_flat_dt_root();
392 return of_flat_dt_is_compatible(root
, "MPC85xxMDS");
395 define_machine(mpc8568_mds
) {
396 .name
= "MPC8568 MDS",
397 .probe
= mpc85xx_mds_probe
,
398 .setup_arch
= mpc85xx_mds_setup_arch
,
399 .init_IRQ
= mpc85xx_mds_pic_init
,
400 .get_irq
= mpic_get_irq
,
401 .restart
= fsl_rstcr_restart
,
402 .calibrate_decr
= generic_calibrate_decr
,
403 .progress
= udbg_progress
,
405 .pcibios_fixup_bus
= fsl_pcibios_fixup_bus
,
409 static int __init
mpc8569_mds_probe(void)
411 unsigned long root
= of_get_flat_dt_root();
413 return of_flat_dt_is_compatible(root
, "fsl,MPC8569EMDS");
416 define_machine(mpc8569_mds
) {
417 .name
= "MPC8569 MDS",
418 .probe
= mpc8569_mds_probe
,
419 .setup_arch
= mpc85xx_mds_setup_arch
,
420 .init_IRQ
= mpc85xx_mds_pic_init
,
421 .get_irq
= mpic_get_irq
,
422 .restart
= fsl_rstcr_restart
,
423 .calibrate_decr
= generic_calibrate_decr
,
424 .progress
= udbg_progress
,
426 .pcibios_fixup_bus
= fsl_pcibios_fixup_bus
,