2 * Network device driver for Cell Processor-Based Blade and Celleb platform
4 * (C) Copyright IBM Corp. 2005
5 * (C) Copyright 2006 TOSHIBA CORPORATION
7 * Authors : Utz Bacher <utz.bacher@de.ibm.com>
8 * Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2, or (at your option)
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 #include <linux/compiler.h>
26 #include <linux/crc32.h>
27 #include <linux/delay.h>
28 #include <linux/etherdevice.h>
29 #include <linux/ethtool.h>
30 #include <linux/firmware.h>
31 #include <linux/if_vlan.h>
33 #include <linux/init.h>
34 #include <linux/gfp.h>
35 #include <linux/ioport.h>
37 #include <linux/kernel.h>
38 #include <linux/mii.h>
39 #include <linux/module.h>
40 #include <linux/netdevice.h>
41 #include <linux/device.h>
42 #include <linux/pci.h>
43 #include <linux/skbuff.h>
44 #include <linux/tcp.h>
45 #include <linux/types.h>
46 #include <linux/vmalloc.h>
47 #include <linux/wait.h>
48 #include <linux/workqueue.h>
49 #include <linux/bitops.h>
50 #include <asm/pci-bridge.h>
51 #include <net/checksum.h>
53 #include "spider_net.h"
55 MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com> and Jens Osterkamp " \
56 "<Jens.Osterkamp@de.ibm.com>");
57 MODULE_DESCRIPTION("Spider Southbridge Gigabit Ethernet driver");
58 MODULE_LICENSE("GPL");
59 MODULE_VERSION(VERSION
);
60 MODULE_FIRMWARE(SPIDER_NET_FIRMWARE_NAME
);
62 static int rx_descriptors
= SPIDER_NET_RX_DESCRIPTORS_DEFAULT
;
63 static int tx_descriptors
= SPIDER_NET_TX_DESCRIPTORS_DEFAULT
;
65 module_param(rx_descriptors
, int, 0444);
66 module_param(tx_descriptors
, int, 0444);
68 MODULE_PARM_DESC(rx_descriptors
, "number of descriptors used " \
70 MODULE_PARM_DESC(tx_descriptors
, "number of descriptors used " \
73 char spider_net_driver_name
[] = "spidernet";
75 static DEFINE_PCI_DEVICE_TABLE(spider_net_pci_tbl
) = {
76 { PCI_VENDOR_ID_TOSHIBA_2
, PCI_DEVICE_ID_TOSHIBA_SPIDER_NET
,
77 PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, 0UL },
81 MODULE_DEVICE_TABLE(pci
, spider_net_pci_tbl
);
84 * spider_net_read_reg - reads an SMMIO register of a card
85 * @card: device structure
86 * @reg: register to read from
88 * returns the content of the specified SMMIO register.
91 spider_net_read_reg(struct spider_net_card
*card
, u32 reg
)
93 /* We use the powerpc specific variants instead of readl_be() because
94 * we know spidernet is not a real PCI device and we can thus avoid the
95 * performance hit caused by the PCI workarounds.
97 return in_be32(card
->regs
+ reg
);
101 * spider_net_write_reg - writes to an SMMIO register of a card
102 * @card: device structure
103 * @reg: register to write to
104 * @value: value to write into the specified SMMIO register
107 spider_net_write_reg(struct spider_net_card
*card
, u32 reg
, u32 value
)
109 /* We use the powerpc specific variants instead of writel_be() because
110 * we know spidernet is not a real PCI device and we can thus avoid the
111 * performance hit caused by the PCI workarounds.
113 out_be32(card
->regs
+ reg
, value
);
116 /** spider_net_write_phy - write to phy register
117 * @netdev: adapter to be written to
120 * @val: value to be written to phy register
122 * spider_net_write_phy_register writes to an arbitrary PHY
123 * register via the spider GPCWOPCMD register. We assume the queue does
124 * not run full (not more than 15 commands outstanding).
127 spider_net_write_phy(struct net_device
*netdev
, int mii_id
,
130 struct spider_net_card
*card
= netdev_priv(netdev
);
133 writevalue
= ((u32
)mii_id
<< 21) |
134 ((u32
)reg
<< 16) | ((u32
)val
);
136 spider_net_write_reg(card
, SPIDER_NET_GPCWOPCMD
, writevalue
);
139 /** spider_net_read_phy - read from phy register
140 * @netdev: network device to be read from
144 * Returns value read from PHY register
146 * spider_net_write_phy reads from an arbitrary PHY
147 * register via the spider GPCROPCMD register
150 spider_net_read_phy(struct net_device
*netdev
, int mii_id
, int reg
)
152 struct spider_net_card
*card
= netdev_priv(netdev
);
155 readvalue
= ((u32
)mii_id
<< 21) | ((u32
)reg
<< 16);
156 spider_net_write_reg(card
, SPIDER_NET_GPCROPCMD
, readvalue
);
158 /* we don't use semaphores to wait for an SPIDER_NET_GPROPCMPINT
159 * interrupt, as we poll for the completion of the read operation
160 * in spider_net_read_phy. Should take about 50 us */
162 readvalue
= spider_net_read_reg(card
, SPIDER_NET_GPCROPCMD
);
163 } while (readvalue
& SPIDER_NET_GPREXEC
);
165 readvalue
&= SPIDER_NET_GPRDAT_MASK
;
171 * spider_net_setup_aneg - initial auto-negotiation setup
172 * @card: device structure
175 spider_net_setup_aneg(struct spider_net_card
*card
)
177 struct mii_phy
*phy
= &card
->phy
;
181 bmsr
= spider_net_read_phy(card
->netdev
, phy
->mii_id
, MII_BMSR
);
182 estat
= spider_net_read_phy(card
->netdev
, phy
->mii_id
, MII_ESTATUS
);
184 if (bmsr
& BMSR_10HALF
)
185 advertise
|= ADVERTISED_10baseT_Half
;
186 if (bmsr
& BMSR_10FULL
)
187 advertise
|= ADVERTISED_10baseT_Full
;
188 if (bmsr
& BMSR_100HALF
)
189 advertise
|= ADVERTISED_100baseT_Half
;
190 if (bmsr
& BMSR_100FULL
)
191 advertise
|= ADVERTISED_100baseT_Full
;
193 if ((bmsr
& BMSR_ESTATEN
) && (estat
& ESTATUS_1000_TFULL
))
194 advertise
|= SUPPORTED_1000baseT_Full
;
195 if ((bmsr
& BMSR_ESTATEN
) && (estat
& ESTATUS_1000_THALF
))
196 advertise
|= SUPPORTED_1000baseT_Half
;
198 mii_phy_probe(phy
, phy
->mii_id
);
199 phy
->def
->ops
->setup_aneg(phy
, advertise
);
204 * spider_net_rx_irq_off - switch off rx irq on this spider card
205 * @card: device structure
207 * switches off rx irq by masking them out in the GHIINTnMSK register
210 spider_net_rx_irq_off(struct spider_net_card
*card
)
214 regvalue
= SPIDER_NET_INT0_MASK_VALUE
& (~SPIDER_NET_RXINT
);
215 spider_net_write_reg(card
, SPIDER_NET_GHIINT0MSK
, regvalue
);
219 * spider_net_rx_irq_on - switch on rx irq on this spider card
220 * @card: device structure
222 * switches on rx irq by enabling them in the GHIINTnMSK register
225 spider_net_rx_irq_on(struct spider_net_card
*card
)
229 regvalue
= SPIDER_NET_INT0_MASK_VALUE
| SPIDER_NET_RXINT
;
230 spider_net_write_reg(card
, SPIDER_NET_GHIINT0MSK
, regvalue
);
234 * spider_net_set_promisc - sets the unicast address or the promiscuous mode
235 * @card: card structure
237 * spider_net_set_promisc sets the unicast destination address filter and
238 * thus either allows for non-promisc mode or promisc mode
241 spider_net_set_promisc(struct spider_net_card
*card
)
244 struct net_device
*netdev
= card
->netdev
;
246 if (netdev
->flags
& IFF_PROMISC
) {
247 /* clear destination entry 0 */
248 spider_net_write_reg(card
, SPIDER_NET_GMRUAFILnR
, 0);
249 spider_net_write_reg(card
, SPIDER_NET_GMRUAFILnR
+ 0x04, 0);
250 spider_net_write_reg(card
, SPIDER_NET_GMRUA0FIL15R
,
251 SPIDER_NET_PROMISC_VALUE
);
253 macu
= netdev
->dev_addr
[0];
255 macu
|= netdev
->dev_addr
[1];
256 memcpy(&macl
, &netdev
->dev_addr
[2], sizeof(macl
));
258 macu
|= SPIDER_NET_UA_DESCR_VALUE
;
259 spider_net_write_reg(card
, SPIDER_NET_GMRUAFILnR
, macu
);
260 spider_net_write_reg(card
, SPIDER_NET_GMRUAFILnR
+ 0x04, macl
);
261 spider_net_write_reg(card
, SPIDER_NET_GMRUA0FIL15R
,
262 SPIDER_NET_NONPROMISC_VALUE
);
267 * spider_net_get_mac_address - read mac address from spider card
268 * @card: device structure
270 * reads MAC address from GMACUNIMACU and GMACUNIMACL registers
273 spider_net_get_mac_address(struct net_device
*netdev
)
275 struct spider_net_card
*card
= netdev_priv(netdev
);
278 macl
= spider_net_read_reg(card
, SPIDER_NET_GMACUNIMACL
);
279 macu
= spider_net_read_reg(card
, SPIDER_NET_GMACUNIMACU
);
281 netdev
->dev_addr
[0] = (macu
>> 24) & 0xff;
282 netdev
->dev_addr
[1] = (macu
>> 16) & 0xff;
283 netdev
->dev_addr
[2] = (macu
>> 8) & 0xff;
284 netdev
->dev_addr
[3] = macu
& 0xff;
285 netdev
->dev_addr
[4] = (macl
>> 8) & 0xff;
286 netdev
->dev_addr
[5] = macl
& 0xff;
288 if (!is_valid_ether_addr(&netdev
->dev_addr
[0]))
295 * spider_net_get_descr_status -- returns the status of a descriptor
296 * @descr: descriptor to look at
298 * returns the status as in the dmac_cmd_status field of the descriptor
301 spider_net_get_descr_status(struct spider_net_hw_descr
*hwdescr
)
303 return hwdescr
->dmac_cmd_status
& SPIDER_NET_DESCR_IND_PROC_MASK
;
307 * spider_net_free_chain - free descriptor chain
308 * @card: card structure
309 * @chain: address of chain
313 spider_net_free_chain(struct spider_net_card
*card
,
314 struct spider_net_descr_chain
*chain
)
316 struct spider_net_descr
*descr
;
321 descr
->hwdescr
->next_descr_addr
= 0;
323 } while (descr
!= chain
->ring
);
325 dma_free_coherent(&card
->pdev
->dev
, chain
->num_desc
,
326 chain
->hwring
, chain
->dma_addr
);
330 * spider_net_init_chain - alloc and link descriptor chain
331 * @card: card structure
332 * @chain: address of chain
334 * We manage a circular list that mirrors the hardware structure,
335 * except that the hardware uses bus addresses.
337 * Returns 0 on success, <0 on failure
340 spider_net_init_chain(struct spider_net_card
*card
,
341 struct spider_net_descr_chain
*chain
)
344 struct spider_net_descr
*descr
;
345 struct spider_net_hw_descr
*hwdescr
;
349 alloc_size
= chain
->num_desc
* sizeof(struct spider_net_hw_descr
);
351 chain
->hwring
= dma_alloc_coherent(&card
->pdev
->dev
, alloc_size
,
352 &chain
->dma_addr
, GFP_KERNEL
);
357 memset(chain
->ring
, 0, chain
->num_desc
* sizeof(struct spider_net_descr
));
359 /* Set up the hardware pointers in each descriptor */
361 hwdescr
= chain
->hwring
;
362 buf
= chain
->dma_addr
;
363 for (i
=0; i
< chain
->num_desc
; i
++, descr
++, hwdescr
++) {
364 hwdescr
->dmac_cmd_status
= SPIDER_NET_DESCR_NOT_IN_USE
;
365 hwdescr
->next_descr_addr
= 0;
367 descr
->hwdescr
= hwdescr
;
368 descr
->bus_addr
= buf
;
369 descr
->next
= descr
+ 1;
370 descr
->prev
= descr
- 1;
372 buf
+= sizeof(struct spider_net_hw_descr
);
374 /* do actual circular list */
375 (descr
-1)->next
= chain
->ring
;
376 chain
->ring
->prev
= descr
-1;
378 spin_lock_init(&chain
->lock
);
379 chain
->head
= chain
->ring
;
380 chain
->tail
= chain
->ring
;
385 * spider_net_free_rx_chain_contents - frees descr contents in rx chain
386 * @card: card structure
388 * returns 0 on success, <0 on failure
391 spider_net_free_rx_chain_contents(struct spider_net_card
*card
)
393 struct spider_net_descr
*descr
;
395 descr
= card
->rx_chain
.head
;
398 pci_unmap_single(card
->pdev
, descr
->hwdescr
->buf_addr
,
399 SPIDER_NET_MAX_FRAME
,
400 PCI_DMA_BIDIRECTIONAL
);
401 dev_kfree_skb(descr
->skb
);
405 } while (descr
!= card
->rx_chain
.head
);
409 * spider_net_prepare_rx_descr - Reinitialize RX descriptor
410 * @card: card structure
411 * @descr: descriptor to re-init
413 * Return 0 on success, <0 on failure.
415 * Allocates a new rx skb, iommu-maps it and attaches it to the
416 * descriptor. Mark the descriptor as activated, ready-to-use.
419 spider_net_prepare_rx_descr(struct spider_net_card
*card
,
420 struct spider_net_descr
*descr
)
422 struct spider_net_hw_descr
*hwdescr
= descr
->hwdescr
;
427 /* we need to round up the buffer size to a multiple of 128 */
428 bufsize
= (SPIDER_NET_MAX_FRAME
+ SPIDER_NET_RXBUF_ALIGN
- 1) &
429 (~(SPIDER_NET_RXBUF_ALIGN
- 1));
431 /* and we need to have it 128 byte aligned, therefore we allocate a
433 /* allocate an skb */
434 descr
->skb
= netdev_alloc_skb(card
->netdev
,
435 bufsize
+ SPIDER_NET_RXBUF_ALIGN
- 1);
437 if (netif_msg_rx_err(card
) && net_ratelimit())
438 dev_err(&card
->netdev
->dev
,
439 "Not enough memory to allocate rx buffer\n");
440 card
->spider_stats
.alloc_rx_skb_error
++;
443 hwdescr
->buf_size
= bufsize
;
444 hwdescr
->result_size
= 0;
445 hwdescr
->valid_size
= 0;
446 hwdescr
->data_status
= 0;
447 hwdescr
->data_error
= 0;
449 offset
= ((unsigned long)descr
->skb
->data
) &
450 (SPIDER_NET_RXBUF_ALIGN
- 1);
452 skb_reserve(descr
->skb
, SPIDER_NET_RXBUF_ALIGN
- offset
);
453 /* iommu-map the skb */
454 buf
= pci_map_single(card
->pdev
, descr
->skb
->data
,
455 SPIDER_NET_MAX_FRAME
, PCI_DMA_FROMDEVICE
);
456 if (pci_dma_mapping_error(card
->pdev
, buf
)) {
457 dev_kfree_skb_any(descr
->skb
);
459 if (netif_msg_rx_err(card
) && net_ratelimit())
460 dev_err(&card
->netdev
->dev
, "Could not iommu-map rx buffer\n");
461 card
->spider_stats
.rx_iommu_map_error
++;
462 hwdescr
->dmac_cmd_status
= SPIDER_NET_DESCR_NOT_IN_USE
;
464 hwdescr
->buf_addr
= buf
;
466 hwdescr
->dmac_cmd_status
= SPIDER_NET_DESCR_CARDOWNED
|
467 SPIDER_NET_DMAC_NOINTR_COMPLETE
;
474 * spider_net_enable_rxchtails - sets RX dmac chain tail addresses
475 * @card: card structure
477 * spider_net_enable_rxchtails sets the RX DMAC chain tail addresses in the
478 * chip by writing to the appropriate register. DMA is enabled in
479 * spider_net_enable_rxdmac.
482 spider_net_enable_rxchtails(struct spider_net_card
*card
)
484 /* assume chain is aligned correctly */
485 spider_net_write_reg(card
, SPIDER_NET_GDADCHA
,
486 card
->rx_chain
.tail
->bus_addr
);
490 * spider_net_enable_rxdmac - enables a receive DMA controller
491 * @card: card structure
493 * spider_net_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
494 * in the GDADMACCNTR register
497 spider_net_enable_rxdmac(struct spider_net_card
*card
)
500 spider_net_write_reg(card
, SPIDER_NET_GDADMACCNTR
,
501 SPIDER_NET_DMA_RX_VALUE
);
505 * spider_net_disable_rxdmac - disables the receive DMA controller
506 * @card: card structure
508 * spider_net_disable_rxdmac terminates processing on the DMA controller
509 * by turing off the DMA controller, with the force-end flag set.
512 spider_net_disable_rxdmac(struct spider_net_card
*card
)
514 spider_net_write_reg(card
, SPIDER_NET_GDADMACCNTR
,
515 SPIDER_NET_DMA_RX_FEND_VALUE
);
519 * spider_net_refill_rx_chain - refills descriptors/skbs in the rx chains
520 * @card: card structure
522 * refills descriptors in the rx chain: allocates skbs and iommu-maps them.
525 spider_net_refill_rx_chain(struct spider_net_card
*card
)
527 struct spider_net_descr_chain
*chain
= &card
->rx_chain
;
530 /* one context doing the refill (and a second context seeing that
531 * and omitting it) is ok. If called by NAPI, we'll be called again
532 * as spider_net_decode_one_descr is called several times. If some
533 * interrupt calls us, the NAPI is about to clean up anyway. */
534 if (!spin_trylock_irqsave(&chain
->lock
, flags
))
537 while (spider_net_get_descr_status(chain
->head
->hwdescr
) ==
538 SPIDER_NET_DESCR_NOT_IN_USE
) {
539 if (spider_net_prepare_rx_descr(card
, chain
->head
))
541 chain
->head
= chain
->head
->next
;
544 spin_unlock_irqrestore(&chain
->lock
, flags
);
548 * spider_net_alloc_rx_skbs - Allocates rx skbs in rx descriptor chains
549 * @card: card structure
551 * Returns 0 on success, <0 on failure.
554 spider_net_alloc_rx_skbs(struct spider_net_card
*card
)
556 struct spider_net_descr_chain
*chain
= &card
->rx_chain
;
557 struct spider_net_descr
*start
= chain
->tail
;
558 struct spider_net_descr
*descr
= start
;
560 /* Link up the hardware chain pointers */
562 descr
->prev
->hwdescr
->next_descr_addr
= descr
->bus_addr
;
564 } while (descr
!= start
);
566 /* Put at least one buffer into the chain. if this fails,
567 * we've got a problem. If not, spider_net_refill_rx_chain
568 * will do the rest at the end of this function. */
569 if (spider_net_prepare_rx_descr(card
, chain
->head
))
572 chain
->head
= chain
->head
->next
;
574 /* This will allocate the rest of the rx buffers;
575 * if not, it's business as usual later on. */
576 spider_net_refill_rx_chain(card
);
577 spider_net_enable_rxdmac(card
);
581 spider_net_free_rx_chain_contents(card
);
586 * spider_net_get_multicast_hash - generates hash for multicast filter table
587 * @addr: multicast address
589 * returns the hash value.
591 * spider_net_get_multicast_hash calculates a hash value for a given multicast
592 * address, that is used to set the multicast filter tables
595 spider_net_get_multicast_hash(struct net_device
*netdev
, __u8
*addr
)
599 char addr_for_crc
[ETH_ALEN
] = { 0, };
602 for (i
= 0; i
< ETH_ALEN
* 8; i
++) {
603 bit
= (addr
[i
/ 8] >> (i
% 8)) & 1;
604 addr_for_crc
[ETH_ALEN
- 1 - i
/ 8] += bit
<< (7 - (i
% 8));
607 crc
= crc32_be(~0, addr_for_crc
, netdev
->addr_len
);
618 * spider_net_set_multi - sets multicast addresses and promisc flags
619 * @netdev: interface device structure
621 * spider_net_set_multi configures multicast addresses as needed for the
622 * netdev interface. It also sets up multicast, allmulti and promisc
623 * flags appropriately
626 spider_net_set_multi(struct net_device
*netdev
)
628 struct netdev_hw_addr
*ha
;
632 struct spider_net_card
*card
= netdev_priv(netdev
);
633 unsigned long bitmask
[SPIDER_NET_MULTICAST_HASHES
/ BITS_PER_LONG
] =
636 spider_net_set_promisc(card
);
638 if (netdev
->flags
& IFF_ALLMULTI
) {
639 for (i
= 0; i
< SPIDER_NET_MULTICAST_HASHES
; i
++) {
645 /* well, we know, what the broadcast hash value is: it's xfd
646 hash = spider_net_get_multicast_hash(netdev, netdev->broadcast); */
647 set_bit(0xfd, bitmask
);
649 netdev_for_each_mc_addr(ha
, netdev
) {
650 hash
= spider_net_get_multicast_hash(netdev
, ha
->addr
);
651 set_bit(hash
, bitmask
);
655 for (i
= 0; i
< SPIDER_NET_MULTICAST_HASHES
/ 4; i
++) {
657 if (test_bit(i
* 4, bitmask
))
660 if (test_bit(i
* 4 + 1, bitmask
))
663 if (test_bit(i
* 4 + 2, bitmask
))
666 if (test_bit(i
* 4 + 3, bitmask
))
669 spider_net_write_reg(card
, SPIDER_NET_GMRMHFILnR
+ i
* 4, reg
);
674 * spider_net_prepare_tx_descr - fill tx descriptor with skb data
675 * @card: card structure
676 * @skb: packet to use
678 * returns 0 on success, <0 on failure.
680 * fills out the descriptor structure with skb data and len. Copies data,
681 * if needed (32bit DMA!)
684 spider_net_prepare_tx_descr(struct spider_net_card
*card
,
687 struct spider_net_descr_chain
*chain
= &card
->tx_chain
;
688 struct spider_net_descr
*descr
;
689 struct spider_net_hw_descr
*hwdescr
;
693 buf
= pci_map_single(card
->pdev
, skb
->data
, skb
->len
, PCI_DMA_TODEVICE
);
694 if (pci_dma_mapping_error(card
->pdev
, buf
)) {
695 if (netif_msg_tx_err(card
) && net_ratelimit())
696 dev_err(&card
->netdev
->dev
, "could not iommu-map packet (%p, %i). "
697 "Dropping packet\n", skb
->data
, skb
->len
);
698 card
->spider_stats
.tx_iommu_map_error
++;
702 spin_lock_irqsave(&chain
->lock
, flags
);
703 descr
= card
->tx_chain
.head
;
704 if (descr
->next
== chain
->tail
->prev
) {
705 spin_unlock_irqrestore(&chain
->lock
, flags
);
706 pci_unmap_single(card
->pdev
, buf
, skb
->len
, PCI_DMA_TODEVICE
);
709 hwdescr
= descr
->hwdescr
;
710 chain
->head
= descr
->next
;
713 hwdescr
->buf_addr
= buf
;
714 hwdescr
->buf_size
= skb
->len
;
715 hwdescr
->next_descr_addr
= 0;
716 hwdescr
->data_status
= 0;
718 hwdescr
->dmac_cmd_status
=
719 SPIDER_NET_DESCR_CARDOWNED
| SPIDER_NET_DMAC_TXFRMTL
;
720 spin_unlock_irqrestore(&chain
->lock
, flags
);
722 if (skb
->ip_summed
== CHECKSUM_PARTIAL
)
723 switch (ip_hdr(skb
)->protocol
) {
725 hwdescr
->dmac_cmd_status
|= SPIDER_NET_DMAC_TCP
;
728 hwdescr
->dmac_cmd_status
|= SPIDER_NET_DMAC_UDP
;
732 /* Chain the bus address, so that the DMA engine finds this descr. */
734 descr
->prev
->hwdescr
->next_descr_addr
= descr
->bus_addr
;
736 card
->netdev
->trans_start
= jiffies
; /* set netdev watchdog timer */
741 spider_net_set_low_watermark(struct spider_net_card
*card
)
743 struct spider_net_descr
*descr
= card
->tx_chain
.tail
;
744 struct spider_net_hw_descr
*hwdescr
;
750 /* Measure the length of the queue. Measurement does not
751 * need to be precise -- does not need a lock. */
752 while (descr
!= card
->tx_chain
.head
) {
753 status
= descr
->hwdescr
->dmac_cmd_status
& SPIDER_NET_DESCR_NOT_IN_USE
;
754 if (status
== SPIDER_NET_DESCR_NOT_IN_USE
)
760 /* If TX queue is short, don't even bother with interrupts */
761 if (cnt
< card
->tx_chain
.num_desc
/4)
764 /* Set low-watermark 3/4th's of the way into the queue. */
765 descr
= card
->tx_chain
.tail
;
770 /* Set the new watermark, clear the old watermark */
771 spin_lock_irqsave(&card
->tx_chain
.lock
, flags
);
772 descr
->hwdescr
->dmac_cmd_status
|= SPIDER_NET_DESCR_TXDESFLG
;
773 if (card
->low_watermark
&& card
->low_watermark
!= descr
) {
774 hwdescr
= card
->low_watermark
->hwdescr
;
775 hwdescr
->dmac_cmd_status
=
776 hwdescr
->dmac_cmd_status
& ~SPIDER_NET_DESCR_TXDESFLG
;
778 card
->low_watermark
= descr
;
779 spin_unlock_irqrestore(&card
->tx_chain
.lock
, flags
);
784 * spider_net_release_tx_chain - processes sent tx descriptors
785 * @card: adapter structure
786 * @brutal: if set, don't care about whether descriptor seems to be in use
788 * returns 0 if the tx ring is empty, otherwise 1.
790 * spider_net_release_tx_chain releases the tx descriptors that spider has
791 * finished with (if non-brutal) or simply release tx descriptors (if brutal).
792 * If some other context is calling this function, we return 1 so that we're
793 * scheduled again (if we were scheduled) and will not lose initiative.
796 spider_net_release_tx_chain(struct spider_net_card
*card
, int brutal
)
798 struct net_device
*dev
= card
->netdev
;
799 struct spider_net_descr_chain
*chain
= &card
->tx_chain
;
800 struct spider_net_descr
*descr
;
801 struct spider_net_hw_descr
*hwdescr
;
808 spin_lock_irqsave(&chain
->lock
, flags
);
809 if (chain
->tail
== chain
->head
) {
810 spin_unlock_irqrestore(&chain
->lock
, flags
);
814 hwdescr
= descr
->hwdescr
;
816 status
= spider_net_get_descr_status(hwdescr
);
818 case SPIDER_NET_DESCR_COMPLETE
:
819 dev
->stats
.tx_packets
++;
820 dev
->stats
.tx_bytes
+= descr
->skb
->len
;
823 case SPIDER_NET_DESCR_CARDOWNED
:
825 spin_unlock_irqrestore(&chain
->lock
, flags
);
829 /* fallthrough, if we release the descriptors
830 * brutally (then we don't care about
831 * SPIDER_NET_DESCR_CARDOWNED) */
833 case SPIDER_NET_DESCR_RESPONSE_ERROR
:
834 case SPIDER_NET_DESCR_PROTECTION_ERROR
:
835 case SPIDER_NET_DESCR_FORCE_END
:
836 if (netif_msg_tx_err(card
))
837 dev_err(&card
->netdev
->dev
, "forcing end of tx descriptor "
838 "with status x%02x\n", status
);
839 dev
->stats
.tx_errors
++;
843 dev
->stats
.tx_dropped
++;
845 spin_unlock_irqrestore(&chain
->lock
, flags
);
850 chain
->tail
= descr
->next
;
851 hwdescr
->dmac_cmd_status
|= SPIDER_NET_DESCR_NOT_IN_USE
;
854 buf_addr
= hwdescr
->buf_addr
;
855 spin_unlock_irqrestore(&chain
->lock
, flags
);
859 pci_unmap_single(card
->pdev
, buf_addr
, skb
->len
,
868 * spider_net_kick_tx_dma - enables TX DMA processing
869 * @card: card structure
871 * This routine will start the transmit DMA running if
872 * it is not already running. This routine ned only be
873 * called when queueing a new packet to an empty tx queue.
874 * Writes the current tx chain head as start address
875 * of the tx descriptor chain and enables the transmission
879 spider_net_kick_tx_dma(struct spider_net_card
*card
)
881 struct spider_net_descr
*descr
;
883 if (spider_net_read_reg(card
, SPIDER_NET_GDTDMACCNTR
) &
884 SPIDER_NET_TX_DMA_EN
)
887 descr
= card
->tx_chain
.tail
;
889 if (spider_net_get_descr_status(descr
->hwdescr
) ==
890 SPIDER_NET_DESCR_CARDOWNED
) {
891 spider_net_write_reg(card
, SPIDER_NET_GDTDCHA
,
893 spider_net_write_reg(card
, SPIDER_NET_GDTDMACCNTR
,
894 SPIDER_NET_DMA_TX_VALUE
);
897 if (descr
== card
->tx_chain
.head
)
903 mod_timer(&card
->tx_timer
, jiffies
+ SPIDER_NET_TX_TIMER
);
907 * spider_net_xmit - transmits a frame over the device
908 * @skb: packet to send out
909 * @netdev: interface device structure
911 * returns 0 on success, !0 on failure
914 spider_net_xmit(struct sk_buff
*skb
, struct net_device
*netdev
)
917 struct spider_net_card
*card
= netdev_priv(netdev
);
919 spider_net_release_tx_chain(card
, 0);
921 if (spider_net_prepare_tx_descr(card
, skb
) != 0) {
922 netdev
->stats
.tx_dropped
++;
923 netif_stop_queue(netdev
);
924 return NETDEV_TX_BUSY
;
927 cnt
= spider_net_set_low_watermark(card
);
929 spider_net_kick_tx_dma(card
);
934 * spider_net_cleanup_tx_ring - cleans up the TX ring
935 * @card: card structure
937 * spider_net_cleanup_tx_ring is called by either the tx_timer
938 * or from the NAPI polling routine.
939 * This routine releases resources associted with transmitted
940 * packets, including updating the queue tail pointer.
943 spider_net_cleanup_tx_ring(struct spider_net_card
*card
)
945 if ((spider_net_release_tx_chain(card
, 0) != 0) &&
946 (card
->netdev
->flags
& IFF_UP
)) {
947 spider_net_kick_tx_dma(card
);
948 netif_wake_queue(card
->netdev
);
953 * spider_net_do_ioctl - called for device ioctls
954 * @netdev: interface device structure
955 * @ifr: request parameter structure for ioctl
956 * @cmd: command code for ioctl
958 * returns 0 on success, <0 on failure. Currently, we have no special ioctls.
959 * -EOPNOTSUPP is returned, if an unknown ioctl was requested
962 spider_net_do_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
, int cmd
)
971 * spider_net_pass_skb_up - takes an skb from a descriptor and passes it on
972 * @descr: descriptor to process
973 * @card: card structure
975 * Fills out skb structure and passes the data to the stack.
976 * The descriptor state is not changed.
979 spider_net_pass_skb_up(struct spider_net_descr
*descr
,
980 struct spider_net_card
*card
)
982 struct spider_net_hw_descr
*hwdescr
= descr
->hwdescr
;
983 struct sk_buff
*skb
= descr
->skb
;
984 struct net_device
*netdev
= card
->netdev
;
985 u32 data_status
= hwdescr
->data_status
;
986 u32 data_error
= hwdescr
->data_error
;
988 skb_put(skb
, hwdescr
->valid_size
);
990 /* the card seems to add 2 bytes of junk in front
991 * of the ethernet frame */
992 #define SPIDER_MISALIGN 2
993 skb_pull(skb
, SPIDER_MISALIGN
);
994 skb
->protocol
= eth_type_trans(skb
, netdev
);
996 /* checksum offload */
997 if (card
->options
.rx_csum
) {
998 if ( ( (data_status
& SPIDER_NET_DATA_STATUS_CKSUM_MASK
) ==
999 SPIDER_NET_DATA_STATUS_CKSUM_MASK
) &&
1000 !(data_error
& SPIDER_NET_DATA_ERR_CKSUM_MASK
))
1001 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
1003 skb_checksum_none_assert(skb
);
1005 skb_checksum_none_assert(skb
);
1007 if (data_status
& SPIDER_NET_VLAN_PACKET
) {
1008 /* further enhancements: HW-accel VLAN
1009 * vlan_hwaccel_receive_skb
1013 /* update netdevice statistics */
1014 netdev
->stats
.rx_packets
++;
1015 netdev
->stats
.rx_bytes
+= skb
->len
;
1017 /* pass skb up to stack */
1018 netif_receive_skb(skb
);
1021 static void show_rx_chain(struct spider_net_card
*card
)
1023 struct spider_net_descr_chain
*chain
= &card
->rx_chain
;
1024 struct spider_net_descr
*start
= chain
->tail
;
1025 struct spider_net_descr
*descr
= start
;
1026 struct spider_net_hw_descr
*hwd
= start
->hwdescr
;
1027 struct device
*dev
= &card
->netdev
->dev
;
1028 u32 curr_desc
, next_desc
;
1033 int off
= start
- chain
->ring
;
1034 int cstat
= hwd
->dmac_cmd_status
;
1036 dev_info(dev
, "Total number of descrs=%d\n",
1038 dev_info(dev
, "Chain tail located at descr=%d, status=0x%x\n",
1041 curr_desc
= spider_net_read_reg(card
, SPIDER_NET_GDACTDPA
);
1042 next_desc
= spider_net_read_reg(card
, SPIDER_NET_GDACNEXTDA
);
1047 hwd
= descr
->hwdescr
;
1048 off
= descr
- chain
->ring
;
1049 status
= hwd
->dmac_cmd_status
;
1051 if (descr
== chain
->head
)
1052 dev_info(dev
, "Chain head is at %d, head status=0x%x\n",
1055 if (curr_desc
== descr
->bus_addr
)
1056 dev_info(dev
, "HW curr desc (GDACTDPA) is at %d, status=0x%x\n",
1059 if (next_desc
== descr
->bus_addr
)
1060 dev_info(dev
, "HW next desc (GDACNEXTDA) is at %d, status=0x%x\n",
1063 if (hwd
->next_descr_addr
== 0)
1064 dev_info(dev
, "chain is cut at %d\n", off
);
1066 if (cstat
!= status
) {
1067 int from
= (chain
->num_desc
+ off
- cnt
) % chain
->num_desc
;
1068 int to
= (chain
->num_desc
+ off
- 1) % chain
->num_desc
;
1069 dev_info(dev
, "Have %d (from %d to %d) descrs "
1070 "with stat=0x%08x\n", cnt
, from
, to
, cstat
);
1077 descr
= descr
->next
;
1078 } while (descr
!= start
);
1080 dev_info(dev
, "Last %d descrs with stat=0x%08x "
1081 "for a total of %d descrs\n", cnt
, cstat
, tot
);
1084 /* Now dump the whole ring */
1088 struct spider_net_hw_descr
*hwd
= descr
->hwdescr
;
1089 status
= spider_net_get_descr_status(hwd
);
1090 cnt
= descr
- chain
->ring
;
1091 dev_info(dev
, "Descr %d stat=0x%08x skb=%p\n",
1092 cnt
, status
, descr
->skb
);
1093 dev_info(dev
, "bus addr=%08x buf addr=%08x sz=%d\n",
1094 descr
->bus_addr
, hwd
->buf_addr
, hwd
->buf_size
);
1095 dev_info(dev
, "next=%08x result sz=%d valid sz=%d\n",
1096 hwd
->next_descr_addr
, hwd
->result_size
,
1098 dev_info(dev
, "dmac=%08x data stat=%08x data err=%08x\n",
1099 hwd
->dmac_cmd_status
, hwd
->data_status
,
1101 dev_info(dev
, "\n");
1103 descr
= descr
->next
;
1104 } while (descr
!= start
);
1110 * spider_net_resync_head_ptr - Advance head ptr past empty descrs
1112 * If the driver fails to keep up and empty the queue, then the
1113 * hardware wil run out of room to put incoming packets. This
1114 * will cause the hardware to skip descrs that are full (instead
1115 * of halting/retrying). Thus, once the driver runs, it wil need
1116 * to "catch up" to where the hardware chain pointer is at.
1118 static void spider_net_resync_head_ptr(struct spider_net_card
*card
)
1120 unsigned long flags
;
1121 struct spider_net_descr_chain
*chain
= &card
->rx_chain
;
1122 struct spider_net_descr
*descr
;
1125 /* Advance head pointer past any empty descrs */
1126 descr
= chain
->head
;
1127 status
= spider_net_get_descr_status(descr
->hwdescr
);
1129 if (status
== SPIDER_NET_DESCR_NOT_IN_USE
)
1132 spin_lock_irqsave(&chain
->lock
, flags
);
1134 descr
= chain
->head
;
1135 status
= spider_net_get_descr_status(descr
->hwdescr
);
1136 for (i
=0; i
<chain
->num_desc
; i
++) {
1137 if (status
!= SPIDER_NET_DESCR_CARDOWNED
) break;
1138 descr
= descr
->next
;
1139 status
= spider_net_get_descr_status(descr
->hwdescr
);
1141 chain
->head
= descr
;
1143 spin_unlock_irqrestore(&chain
->lock
, flags
);
1146 static int spider_net_resync_tail_ptr(struct spider_net_card
*card
)
1148 struct spider_net_descr_chain
*chain
= &card
->rx_chain
;
1149 struct spider_net_descr
*descr
;
1152 /* Advance tail pointer past any empty and reaped descrs */
1153 descr
= chain
->tail
;
1154 status
= spider_net_get_descr_status(descr
->hwdescr
);
1156 for (i
=0; i
<chain
->num_desc
; i
++) {
1157 if ((status
!= SPIDER_NET_DESCR_CARDOWNED
) &&
1158 (status
!= SPIDER_NET_DESCR_NOT_IN_USE
)) break;
1159 descr
= descr
->next
;
1160 status
= spider_net_get_descr_status(descr
->hwdescr
);
1162 chain
->tail
= descr
;
1164 if ((i
== chain
->num_desc
) || (i
== 0))
1170 * spider_net_decode_one_descr - processes an RX descriptor
1171 * @card: card structure
1173 * Returns 1 if a packet has been sent to the stack, otherwise 0.
1175 * Processes an RX descriptor by iommu-unmapping the data buffer
1176 * and passing the packet up to the stack. This function is called
1177 * in softirq context, e.g. either bottom half from interrupt or
1178 * NAPI polling context.
1181 spider_net_decode_one_descr(struct spider_net_card
*card
)
1183 struct net_device
*dev
= card
->netdev
;
1184 struct spider_net_descr_chain
*chain
= &card
->rx_chain
;
1185 struct spider_net_descr
*descr
= chain
->tail
;
1186 struct spider_net_hw_descr
*hwdescr
= descr
->hwdescr
;
1190 status
= spider_net_get_descr_status(hwdescr
);
1192 /* Nothing in the descriptor, or ring must be empty */
1193 if ((status
== SPIDER_NET_DESCR_CARDOWNED
) ||
1194 (status
== SPIDER_NET_DESCR_NOT_IN_USE
))
1197 /* descriptor definitively used -- move on tail */
1198 chain
->tail
= descr
->next
;
1200 /* unmap descriptor */
1201 hw_buf_addr
= hwdescr
->buf_addr
;
1202 hwdescr
->buf_addr
= 0xffffffff;
1203 pci_unmap_single(card
->pdev
, hw_buf_addr
,
1204 SPIDER_NET_MAX_FRAME
, PCI_DMA_FROMDEVICE
);
1206 if ( (status
== SPIDER_NET_DESCR_RESPONSE_ERROR
) ||
1207 (status
== SPIDER_NET_DESCR_PROTECTION_ERROR
) ||
1208 (status
== SPIDER_NET_DESCR_FORCE_END
) ) {
1209 if (netif_msg_rx_err(card
))
1211 "dropping RX descriptor with state %d\n", status
);
1212 dev
->stats
.rx_dropped
++;
1216 if ( (status
!= SPIDER_NET_DESCR_COMPLETE
) &&
1217 (status
!= SPIDER_NET_DESCR_FRAME_END
) ) {
1218 if (netif_msg_rx_err(card
))
1219 dev_err(&card
->netdev
->dev
,
1220 "RX descriptor with unknown state %d\n", status
);
1221 card
->spider_stats
.rx_desc_unk_state
++;
1225 /* The cases we'll throw away the packet immediately */
1226 if (hwdescr
->data_error
& SPIDER_NET_DESTROY_RX_FLAGS
) {
1227 if (netif_msg_rx_err(card
))
1228 dev_err(&card
->netdev
->dev
,
1229 "error in received descriptor found, "
1230 "data_status=x%08x, data_error=x%08x\n",
1231 hwdescr
->data_status
, hwdescr
->data_error
);
1235 if (hwdescr
->dmac_cmd_status
& SPIDER_NET_DESCR_BAD_STATUS
) {
1236 dev_err(&card
->netdev
->dev
, "bad status, cmd_status=x%08x\n",
1237 hwdescr
->dmac_cmd_status
);
1238 pr_err("buf_addr=x%08x\n", hw_buf_addr
);
1239 pr_err("buf_size=x%08x\n", hwdescr
->buf_size
);
1240 pr_err("next_descr_addr=x%08x\n", hwdescr
->next_descr_addr
);
1241 pr_err("result_size=x%08x\n", hwdescr
->result_size
);
1242 pr_err("valid_size=x%08x\n", hwdescr
->valid_size
);
1243 pr_err("data_status=x%08x\n", hwdescr
->data_status
);
1244 pr_err("data_error=x%08x\n", hwdescr
->data_error
);
1245 pr_err("which=%ld\n", descr
- card
->rx_chain
.ring
);
1247 card
->spider_stats
.rx_desc_error
++;
1251 /* Ok, we've got a packet in descr */
1252 spider_net_pass_skb_up(descr
, card
);
1254 hwdescr
->dmac_cmd_status
= SPIDER_NET_DESCR_NOT_IN_USE
;
1258 if (netif_msg_rx_err(card
))
1259 show_rx_chain(card
);
1260 dev_kfree_skb_irq(descr
->skb
);
1262 hwdescr
->dmac_cmd_status
= SPIDER_NET_DESCR_NOT_IN_USE
;
1267 * spider_net_poll - NAPI poll function called by the stack to return packets
1268 * @netdev: interface device structure
1269 * @budget: number of packets we can pass to the stack at most
1271 * returns 0 if no more packets available to the driver/stack. Returns 1,
1272 * if the quota is exceeded, but the driver has still packets.
1274 * spider_net_poll returns all packets from the rx descriptors to the stack
1275 * (using netif_receive_skb). If all/enough packets are up, the driver
1276 * reenables interrupts and returns 0. If not, 1 is returned.
1278 static int spider_net_poll(struct napi_struct
*napi
, int budget
)
1280 struct spider_net_card
*card
= container_of(napi
, struct spider_net_card
, napi
);
1281 int packets_done
= 0;
1283 while (packets_done
< budget
) {
1284 if (!spider_net_decode_one_descr(card
))
1290 if ((packets_done
== 0) && (card
->num_rx_ints
!= 0)) {
1291 if (!spider_net_resync_tail_ptr(card
))
1292 packets_done
= budget
;
1293 spider_net_resync_head_ptr(card
);
1295 card
->num_rx_ints
= 0;
1297 spider_net_refill_rx_chain(card
);
1298 spider_net_enable_rxdmac(card
);
1300 spider_net_cleanup_tx_ring(card
);
1302 /* if all packets are in the stack, enable interrupts and return 0 */
1303 /* if not, return 1 */
1304 if (packets_done
< budget
) {
1305 napi_complete(napi
);
1306 spider_net_rx_irq_on(card
);
1307 card
->ignore_rx_ramfull
= 0;
1310 return packets_done
;
1314 * spider_net_change_mtu - changes the MTU of an interface
1315 * @netdev: interface device structure
1316 * @new_mtu: new MTU value
1318 * returns 0 on success, <0 on failure
1321 spider_net_change_mtu(struct net_device
*netdev
, int new_mtu
)
1323 /* no need to re-alloc skbs or so -- the max mtu is about 2.3k
1324 * and mtu is outbound only anyway */
1325 if ( (new_mtu
< SPIDER_NET_MIN_MTU
) ||
1326 (new_mtu
> SPIDER_NET_MAX_MTU
) )
1328 netdev
->mtu
= new_mtu
;
1333 * spider_net_set_mac - sets the MAC of an interface
1334 * @netdev: interface device structure
1335 * @ptr: pointer to new MAC address
1337 * Returns 0 on success, <0 on failure. Currently, we don't support this
1338 * and will always return EOPNOTSUPP.
1341 spider_net_set_mac(struct net_device
*netdev
, void *p
)
1343 struct spider_net_card
*card
= netdev_priv(netdev
);
1344 u32 macl
, macu
, regvalue
;
1345 struct sockaddr
*addr
= p
;
1347 if (!is_valid_ether_addr(addr
->sa_data
))
1348 return -EADDRNOTAVAIL
;
1350 /* switch off GMACTPE and GMACRPE */
1351 regvalue
= spider_net_read_reg(card
, SPIDER_NET_GMACOPEMD
);
1352 regvalue
&= ~((1 << 5) | (1 << 6));
1353 spider_net_write_reg(card
, SPIDER_NET_GMACOPEMD
, regvalue
);
1356 macu
= (addr
->sa_data
[0]<<24) + (addr
->sa_data
[1]<<16) +
1357 (addr
->sa_data
[2]<<8) + (addr
->sa_data
[3]);
1358 macl
= (addr
->sa_data
[4]<<8) + (addr
->sa_data
[5]);
1359 spider_net_write_reg(card
, SPIDER_NET_GMACUNIMACU
, macu
);
1360 spider_net_write_reg(card
, SPIDER_NET_GMACUNIMACL
, macl
);
1362 /* switch GMACTPE and GMACRPE back on */
1363 regvalue
= spider_net_read_reg(card
, SPIDER_NET_GMACOPEMD
);
1364 regvalue
|= ((1 << 5) | (1 << 6));
1365 spider_net_write_reg(card
, SPIDER_NET_GMACOPEMD
, regvalue
);
1367 spider_net_set_promisc(card
);
1369 /* look up, whether we have been successful */
1370 if (spider_net_get_mac_address(netdev
))
1371 return -EADDRNOTAVAIL
;
1372 if (memcmp(netdev
->dev_addr
,addr
->sa_data
,netdev
->addr_len
))
1373 return -EADDRNOTAVAIL
;
1379 * spider_net_link_reset
1380 * @netdev: net device structure
1382 * This is called when the PHY_LINK signal is asserted. For the blade this is
1383 * not connected so we should never get here.
1387 spider_net_link_reset(struct net_device
*netdev
)
1390 struct spider_net_card
*card
= netdev_priv(netdev
);
1392 del_timer_sync(&card
->aneg_timer
);
1394 /* clear interrupt, block further interrupts */
1395 spider_net_write_reg(card
, SPIDER_NET_GMACST
,
1396 spider_net_read_reg(card
, SPIDER_NET_GMACST
));
1397 spider_net_write_reg(card
, SPIDER_NET_GMACINTEN
, 0);
1399 /* reset phy and setup aneg */
1400 card
->aneg_count
= 0;
1401 card
->medium
= BCM54XX_COPPER
;
1402 spider_net_setup_aneg(card
);
1403 mod_timer(&card
->aneg_timer
, jiffies
+ SPIDER_NET_ANEG_TIMER
);
1408 * spider_net_handle_error_irq - handles errors raised by an interrupt
1409 * @card: card structure
1410 * @status_reg: interrupt status register 0 (GHIINT0STS)
1412 * spider_net_handle_error_irq treats or ignores all error conditions
1413 * found when an interrupt is presented
1416 spider_net_handle_error_irq(struct spider_net_card
*card
, u32 status_reg
,
1417 u32 error_reg1
, u32 error_reg2
)
1422 /* check GHIINT0STS ************************************/
1424 for (i
= 0; i
< 32; i
++)
1425 if (status_reg
& (1<<i
))
1428 /* let error_reg1 and error_reg2 evaluation decide, what to do
1429 case SPIDER_NET_PHYINT:
1430 case SPIDER_NET_GMAC2INT:
1431 case SPIDER_NET_GMAC1INT:
1432 case SPIDER_NET_GFIFOINT:
1433 case SPIDER_NET_DMACINT:
1434 case SPIDER_NET_GSYSINT:
1437 case SPIDER_NET_GIPSINT
:
1441 case SPIDER_NET_GPWOPCMPINT
:
1442 /* PHY write operation completed */
1445 case SPIDER_NET_GPROPCMPINT
:
1446 /* PHY read operation completed */
1447 /* we don't use semaphores, as we poll for the completion
1448 * of the read operation in spider_net_read_phy. Should take
1452 case SPIDER_NET_GPWFFINT
:
1453 /* PHY command queue full */
1454 if (netif_msg_intr(card
))
1455 dev_err(&card
->netdev
->dev
, "PHY write queue full\n");
1459 /* case SPIDER_NET_GRMDADRINT: not used. print a message */
1460 /* case SPIDER_NET_GRMARPINT: not used. print a message */
1461 /* case SPIDER_NET_GRMMPINT: not used. print a message */
1463 case SPIDER_NET_GDTDEN0INT
:
1464 /* someone has set TX_DMA_EN to 0 */
1468 case SPIDER_NET_GDDDEN0INT
: /* fallthrough */
1469 case SPIDER_NET_GDCDEN0INT
: /* fallthrough */
1470 case SPIDER_NET_GDBDEN0INT
: /* fallthrough */
1471 case SPIDER_NET_GDADEN0INT
:
1472 /* someone has set RX_DMA_EN to 0 */
1477 case SPIDER_NET_GDDFDCINT
:
1478 case SPIDER_NET_GDCFDCINT
:
1479 case SPIDER_NET_GDBFDCINT
:
1480 case SPIDER_NET_GDAFDCINT
:
1481 /* case SPIDER_NET_GDNMINT: not used. print a message */
1482 /* case SPIDER_NET_GCNMINT: not used. print a message */
1483 /* case SPIDER_NET_GBNMINT: not used. print a message */
1484 /* case SPIDER_NET_GANMINT: not used. print a message */
1485 /* case SPIDER_NET_GRFNMINT: not used. print a message */
1490 case SPIDER_NET_GDTFDCINT
:
1493 case SPIDER_NET_GTTEDINT
:
1496 case SPIDER_NET_GDTDCEINT
:
1497 /* chain end. If a descriptor should be sent, kick off
1499 if (card->tx_chain.tail != card->tx_chain.head)
1500 spider_net_kick_tx_dma(card);
1505 /* case SPIDER_NET_G1TMCNTINT: not used. print a message */
1506 /* case SPIDER_NET_GFREECNTINT: not used. print a message */
1509 /* check GHIINT1STS ************************************/
1511 for (i
= 0; i
< 32; i
++)
1512 if (error_reg1
& (1<<i
))
1515 case SPIDER_NET_GTMFLLINT
:
1516 /* TX RAM full may happen on a usual case.
1517 * Logging is not needed. */
1520 case SPIDER_NET_GRFDFLLINT
: /* fallthrough */
1521 case SPIDER_NET_GRFCFLLINT
: /* fallthrough */
1522 case SPIDER_NET_GRFBFLLINT
: /* fallthrough */
1523 case SPIDER_NET_GRFAFLLINT
: /* fallthrough */
1524 case SPIDER_NET_GRMFLLINT
:
1525 /* Could happen when rx chain is full */
1526 if (card
->ignore_rx_ramfull
== 0) {
1527 card
->ignore_rx_ramfull
= 1;
1528 spider_net_resync_head_ptr(card
);
1529 spider_net_refill_rx_chain(card
);
1530 spider_net_enable_rxdmac(card
);
1531 card
->num_rx_ints
++;
1532 napi_schedule(&card
->napi
);
1537 /* case SPIDER_NET_GTMSHTINT: problem, print a message */
1538 case SPIDER_NET_GDTINVDINT
:
1539 /* allrighty. tx from previous descr ok */
1544 case SPIDER_NET_GDDDCEINT
: /* fallthrough */
1545 case SPIDER_NET_GDCDCEINT
: /* fallthrough */
1546 case SPIDER_NET_GDBDCEINT
: /* fallthrough */
1547 case SPIDER_NET_GDADCEINT
:
1548 spider_net_resync_head_ptr(card
);
1549 spider_net_refill_rx_chain(card
);
1550 spider_net_enable_rxdmac(card
);
1551 card
->num_rx_ints
++;
1552 napi_schedule(&card
->napi
);
1556 /* invalid descriptor */
1557 case SPIDER_NET_GDDINVDINT
: /* fallthrough */
1558 case SPIDER_NET_GDCINVDINT
: /* fallthrough */
1559 case SPIDER_NET_GDBINVDINT
: /* fallthrough */
1560 case SPIDER_NET_GDAINVDINT
:
1561 /* Could happen when rx chain is full */
1562 spider_net_resync_head_ptr(card
);
1563 spider_net_refill_rx_chain(card
);
1564 spider_net_enable_rxdmac(card
);
1565 card
->num_rx_ints
++;
1566 napi_schedule(&card
->napi
);
1570 /* case SPIDER_NET_GDTRSERINT: problem, print a message */
1571 /* case SPIDER_NET_GDDRSERINT: problem, print a message */
1572 /* case SPIDER_NET_GDCRSERINT: problem, print a message */
1573 /* case SPIDER_NET_GDBRSERINT: problem, print a message */
1574 /* case SPIDER_NET_GDARSERINT: problem, print a message */
1575 /* case SPIDER_NET_GDSERINT: problem, print a message */
1576 /* case SPIDER_NET_GDTPTERINT: problem, print a message */
1577 /* case SPIDER_NET_GDDPTERINT: problem, print a message */
1578 /* case SPIDER_NET_GDCPTERINT: problem, print a message */
1579 /* case SPIDER_NET_GDBPTERINT: problem, print a message */
1580 /* case SPIDER_NET_GDAPTERINT: problem, print a message */
1586 /* check GHIINT2STS ************************************/
1588 for (i
= 0; i
< 32; i
++)
1589 if (error_reg2
& (1<<i
))
1592 /* there is nothing we can (want to) do at this time. Log a
1593 * message, we can switch on and off the specific values later on
1594 case SPIDER_NET_GPROPERINT:
1595 case SPIDER_NET_GMCTCRSNGINT:
1596 case SPIDER_NET_GMCTLCOLINT:
1597 case SPIDER_NET_GMCTTMOTINT:
1598 case SPIDER_NET_GMCRCAERINT:
1599 case SPIDER_NET_GMCRCALERINT:
1600 case SPIDER_NET_GMCRALNERINT:
1601 case SPIDER_NET_GMCROVRINT:
1602 case SPIDER_NET_GMCRRNTINT:
1603 case SPIDER_NET_GMCRRXERINT:
1604 case SPIDER_NET_GTITCSERINT:
1605 case SPIDER_NET_GTIFMTERINT:
1606 case SPIDER_NET_GTIPKTRVKINT:
1607 case SPIDER_NET_GTISPINGINT:
1608 case SPIDER_NET_GTISADNGINT:
1609 case SPIDER_NET_GTISPDNGINT:
1610 case SPIDER_NET_GRIFMTERINT:
1611 case SPIDER_NET_GRIPKTRVKINT:
1612 case SPIDER_NET_GRISPINGINT:
1613 case SPIDER_NET_GRISADNGINT:
1614 case SPIDER_NET_GRISPDNGINT:
1621 if ((show_error
) && (netif_msg_intr(card
)) && net_ratelimit())
1622 dev_err(&card
->netdev
->dev
, "Error interrupt, GHIINT0STS = 0x%08x, "
1623 "GHIINT1STS = 0x%08x, GHIINT2STS = 0x%08x\n",
1624 status_reg
, error_reg1
, error_reg2
);
1626 /* clear interrupt sources */
1627 spider_net_write_reg(card
, SPIDER_NET_GHIINT1STS
, error_reg1
);
1628 spider_net_write_reg(card
, SPIDER_NET_GHIINT2STS
, error_reg2
);
1632 * spider_net_interrupt - interrupt handler for spider_net
1633 * @irq: interrupt number
1634 * @ptr: pointer to net_device
1636 * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no
1637 * interrupt found raised by card.
1639 * This is the interrupt handler, that turns off
1640 * interrupts for this device and makes the stack poll the driver
1643 spider_net_interrupt(int irq
, void *ptr
)
1645 struct net_device
*netdev
= ptr
;
1646 struct spider_net_card
*card
= netdev_priv(netdev
);
1647 u32 status_reg
, error_reg1
, error_reg2
;
1649 status_reg
= spider_net_read_reg(card
, SPIDER_NET_GHIINT0STS
);
1650 error_reg1
= spider_net_read_reg(card
, SPIDER_NET_GHIINT1STS
);
1651 error_reg2
= spider_net_read_reg(card
, SPIDER_NET_GHIINT2STS
);
1653 if (!(status_reg
& SPIDER_NET_INT0_MASK_VALUE
) &&
1654 !(error_reg1
& SPIDER_NET_INT1_MASK_VALUE
) &&
1655 !(error_reg2
& SPIDER_NET_INT2_MASK_VALUE
))
1658 if (status_reg
& SPIDER_NET_RXINT
) {
1659 spider_net_rx_irq_off(card
);
1660 napi_schedule(&card
->napi
);
1661 card
->num_rx_ints
++;
1663 if (status_reg
& SPIDER_NET_TXINT
)
1664 napi_schedule(&card
->napi
);
1666 if (status_reg
& SPIDER_NET_LINKINT
)
1667 spider_net_link_reset(netdev
);
1669 if (status_reg
& SPIDER_NET_ERRINT
)
1670 spider_net_handle_error_irq(card
, status_reg
,
1671 error_reg1
, error_reg2
);
1673 /* clear interrupt sources */
1674 spider_net_write_reg(card
, SPIDER_NET_GHIINT0STS
, status_reg
);
1679 #ifdef CONFIG_NET_POLL_CONTROLLER
1681 * spider_net_poll_controller - artificial interrupt for netconsole etc.
1682 * @netdev: interface device structure
1684 * see Documentation/networking/netconsole.txt
1687 spider_net_poll_controller(struct net_device
*netdev
)
1689 disable_irq(netdev
->irq
);
1690 spider_net_interrupt(netdev
->irq
, netdev
);
1691 enable_irq(netdev
->irq
);
1693 #endif /* CONFIG_NET_POLL_CONTROLLER */
1696 * spider_net_enable_interrupts - enable interrupts
1697 * @card: card structure
1699 * spider_net_enable_interrupt enables several interrupts
1702 spider_net_enable_interrupts(struct spider_net_card
*card
)
1704 spider_net_write_reg(card
, SPIDER_NET_GHIINT0MSK
,
1705 SPIDER_NET_INT0_MASK_VALUE
);
1706 spider_net_write_reg(card
, SPIDER_NET_GHIINT1MSK
,
1707 SPIDER_NET_INT1_MASK_VALUE
);
1708 spider_net_write_reg(card
, SPIDER_NET_GHIINT2MSK
,
1709 SPIDER_NET_INT2_MASK_VALUE
);
1713 * spider_net_disable_interrupts - disable interrupts
1714 * @card: card structure
1716 * spider_net_disable_interrupts disables all the interrupts
1719 spider_net_disable_interrupts(struct spider_net_card
*card
)
1721 spider_net_write_reg(card
, SPIDER_NET_GHIINT0MSK
, 0);
1722 spider_net_write_reg(card
, SPIDER_NET_GHIINT1MSK
, 0);
1723 spider_net_write_reg(card
, SPIDER_NET_GHIINT2MSK
, 0);
1724 spider_net_write_reg(card
, SPIDER_NET_GMACINTEN
, 0);
1728 * spider_net_init_card - initializes the card
1729 * @card: card structure
1731 * spider_net_init_card initializes the card so that other registers can
1735 spider_net_init_card(struct spider_net_card
*card
)
1737 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
1738 SPIDER_NET_CKRCTRL_STOP_VALUE
);
1740 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
1741 SPIDER_NET_CKRCTRL_RUN_VALUE
);
1743 /* trigger ETOMOD signal */
1744 spider_net_write_reg(card
, SPIDER_NET_GMACOPEMD
,
1745 spider_net_read_reg(card
, SPIDER_NET_GMACOPEMD
) | 0x4);
1747 spider_net_disable_interrupts(card
);
1751 * spider_net_enable_card - enables the card by setting all kinds of regs
1752 * @card: card structure
1754 * spider_net_enable_card sets a lot of SMMIO registers to enable the device
1757 spider_net_enable_card(struct spider_net_card
*card
)
1760 /* the following array consists of (register),(value) pairs
1761 * that are set in this function. A register of 0 ends the list */
1763 { SPIDER_NET_GRESUMINTNUM
, 0 },
1764 { SPIDER_NET_GREINTNUM
, 0 },
1766 /* set interrupt frame number registers */
1767 /* clear the single DMA engine registers first */
1768 { SPIDER_NET_GFAFRMNUM
, SPIDER_NET_GFXFRAMES_VALUE
},
1769 { SPIDER_NET_GFBFRMNUM
, SPIDER_NET_GFXFRAMES_VALUE
},
1770 { SPIDER_NET_GFCFRMNUM
, SPIDER_NET_GFXFRAMES_VALUE
},
1771 { SPIDER_NET_GFDFRMNUM
, SPIDER_NET_GFXFRAMES_VALUE
},
1772 /* then set, what we really need */
1773 { SPIDER_NET_GFFRMNUM
, SPIDER_NET_FRAMENUM_VALUE
},
1775 /* timer counter registers and stuff */
1776 { SPIDER_NET_GFREECNNUM
, 0 },
1777 { SPIDER_NET_GONETIMENUM
, 0 },
1778 { SPIDER_NET_GTOUTFRMNUM
, 0 },
1780 /* RX mode setting */
1781 { SPIDER_NET_GRXMDSET
, SPIDER_NET_RXMODE_VALUE
},
1782 /* TX mode setting */
1783 { SPIDER_NET_GTXMDSET
, SPIDER_NET_TXMODE_VALUE
},
1784 /* IPSEC mode setting */
1785 { SPIDER_NET_GIPSECINIT
, SPIDER_NET_IPSECINIT_VALUE
},
1787 { SPIDER_NET_GFTRESTRT
, SPIDER_NET_RESTART_VALUE
},
1789 { SPIDER_NET_GMRWOLCTRL
, 0 },
1790 { SPIDER_NET_GTESTMD
, 0x10000000 },
1791 { SPIDER_NET_GTTQMSK
, 0x00400040 },
1793 { SPIDER_NET_GMACINTEN
, 0 },
1795 /* flow control stuff */
1796 { SPIDER_NET_GMACAPAUSE
, SPIDER_NET_MACAPAUSE_VALUE
},
1797 { SPIDER_NET_GMACTXPAUSE
, SPIDER_NET_TXPAUSE_VALUE
},
1799 { SPIDER_NET_GMACBSTLMT
, SPIDER_NET_BURSTLMT_VALUE
},
1804 while (regs
[i
][0]) {
1805 spider_net_write_reg(card
, regs
[i
][0], regs
[i
][1]);
1809 /* clear unicast filter table entries 1 to 14 */
1810 for (i
= 1; i
<= 14; i
++) {
1811 spider_net_write_reg(card
,
1812 SPIDER_NET_GMRUAFILnR
+ i
* 8,
1814 spider_net_write_reg(card
,
1815 SPIDER_NET_GMRUAFILnR
+ i
* 8 + 4,
1819 spider_net_write_reg(card
, SPIDER_NET_GMRUA0FIL15R
, 0x08080000);
1821 spider_net_write_reg(card
, SPIDER_NET_ECMODE
, SPIDER_NET_ECMODE_VALUE
);
1823 /* set chain tail address for RX chains and
1825 spider_net_enable_rxchtails(card
);
1826 spider_net_enable_rxdmac(card
);
1828 spider_net_write_reg(card
, SPIDER_NET_GRXDMAEN
, SPIDER_NET_WOL_VALUE
);
1830 spider_net_write_reg(card
, SPIDER_NET_GMACLENLMT
,
1831 SPIDER_NET_LENLMT_VALUE
);
1832 spider_net_write_reg(card
, SPIDER_NET_GMACOPEMD
,
1833 SPIDER_NET_OPMODE_VALUE
);
1835 spider_net_write_reg(card
, SPIDER_NET_GDTDMACCNTR
,
1836 SPIDER_NET_GDTBSTA
);
1840 * spider_net_download_firmware - loads firmware into the adapter
1841 * @card: card structure
1842 * @firmware_ptr: pointer to firmware data
1844 * spider_net_download_firmware loads the firmware data into the
1845 * adapter. It assumes the length etc. to be allright.
1848 spider_net_download_firmware(struct spider_net_card
*card
,
1849 const void *firmware_ptr
)
1852 const u32
*fw_ptr
= firmware_ptr
;
1854 /* stop sequencers */
1855 spider_net_write_reg(card
, SPIDER_NET_GSINIT
,
1856 SPIDER_NET_STOP_SEQ_VALUE
);
1858 for (sequencer
= 0; sequencer
< SPIDER_NET_FIRMWARE_SEQS
;
1860 spider_net_write_reg(card
,
1861 SPIDER_NET_GSnPRGADR
+ sequencer
* 8, 0);
1862 for (i
= 0; i
< SPIDER_NET_FIRMWARE_SEQWORDS
; i
++) {
1863 spider_net_write_reg(card
, SPIDER_NET_GSnPRGDAT
+
1864 sequencer
* 8, *fw_ptr
);
1869 if (spider_net_read_reg(card
, SPIDER_NET_GSINIT
))
1872 spider_net_write_reg(card
, SPIDER_NET_GSINIT
,
1873 SPIDER_NET_RUN_SEQ_VALUE
);
1879 * spider_net_init_firmware - reads in firmware parts
1880 * @card: card structure
1882 * Returns 0 on success, <0 on failure
1884 * spider_net_init_firmware opens the sequencer firmware and does some basic
1885 * checks. This function opens and releases the firmware structure. A call
1886 * to download the firmware is performed before the release.
1890 * spider_fw.bin is expected to be a file containing 6*1024*4 bytes, 4k being
1891 * the program for each sequencer. Use the command
1892 * tail -q -n +2 Seq_code1_0x088.txt Seq_code2_0x090.txt \
1893 * Seq_code3_0x098.txt Seq_code4_0x0A0.txt Seq_code5_0x0A8.txt \
1894 * Seq_code6_0x0B0.txt | xxd -r -p -c4 > spider_fw.bin
1896 * to generate spider_fw.bin, if you have sequencer programs with something
1897 * like the following contents for each sequencer:
1898 * <ONE LINE COMMENT>
1899 * <FIRST 4-BYTES-WORD FOR SEQUENCER>
1900 * <SECOND 4-BYTES-WORD FOR SEQUENCER>
1902 * <1024th 4-BYTES-WORD FOR SEQUENCER>
1905 spider_net_init_firmware(struct spider_net_card
*card
)
1907 struct firmware
*firmware
= NULL
;
1908 struct device_node
*dn
;
1909 const u8
*fw_prop
= NULL
;
1913 if (request_firmware((const struct firmware
**)&firmware
,
1914 SPIDER_NET_FIRMWARE_NAME
, &card
->pdev
->dev
) == 0) {
1915 if ( (firmware
->size
!= SPIDER_NET_FIRMWARE_LEN
) &&
1916 netif_msg_probe(card
) ) {
1917 dev_err(&card
->netdev
->dev
,
1918 "Incorrect size of spidernet firmware in " \
1919 "filesystem. Looking in host firmware...\n");
1922 err
= spider_net_download_firmware(card
, firmware
->data
);
1924 release_firmware(firmware
);
1932 dn
= pci_device_to_OF_node(card
->pdev
);
1936 fw_prop
= of_get_property(dn
, "firmware", &fw_size
);
1940 if ( (fw_size
!= SPIDER_NET_FIRMWARE_LEN
) &&
1941 netif_msg_probe(card
) ) {
1942 dev_err(&card
->netdev
->dev
,
1943 "Incorrect size of spidernet firmware in host firmware\n");
1947 err
= spider_net_download_firmware(card
, fw_prop
);
1952 if (netif_msg_probe(card
))
1953 dev_err(&card
->netdev
->dev
,
1954 "Couldn't find spidernet firmware in filesystem " \
1955 "or host firmware\n");
1960 * spider_net_open - called upon ifonfig up
1961 * @netdev: interface device structure
1963 * returns 0 on success, <0 on failure
1965 * spider_net_open allocates all the descriptors and memory needed for
1966 * operation, sets up multicast list and enables interrupts
1969 spider_net_open(struct net_device
*netdev
)
1971 struct spider_net_card
*card
= netdev_priv(netdev
);
1974 result
= spider_net_init_firmware(card
);
1976 goto init_firmware_failed
;
1978 /* start probing with copper */
1979 card
->aneg_count
= 0;
1980 card
->medium
= BCM54XX_COPPER
;
1981 spider_net_setup_aneg(card
);
1982 if (card
->phy
.def
->phy_id
)
1983 mod_timer(&card
->aneg_timer
, jiffies
+ SPIDER_NET_ANEG_TIMER
);
1985 result
= spider_net_init_chain(card
, &card
->tx_chain
);
1987 goto alloc_tx_failed
;
1988 card
->low_watermark
= NULL
;
1990 result
= spider_net_init_chain(card
, &card
->rx_chain
);
1992 goto alloc_rx_failed
;
1994 /* Allocate rx skbs */
1995 if (spider_net_alloc_rx_skbs(card
))
1996 goto alloc_skbs_failed
;
1998 spider_net_set_multi(netdev
);
2000 /* further enhancement: setup hw vlan, if needed */
2003 if (request_irq(netdev
->irq
, spider_net_interrupt
,
2004 IRQF_SHARED
, netdev
->name
, netdev
))
2005 goto register_int_failed
;
2007 spider_net_enable_card(card
);
2009 netif_start_queue(netdev
);
2010 netif_carrier_on(netdev
);
2011 napi_enable(&card
->napi
);
2013 spider_net_enable_interrupts(card
);
2017 register_int_failed
:
2018 spider_net_free_rx_chain_contents(card
);
2020 spider_net_free_chain(card
, &card
->rx_chain
);
2022 spider_net_free_chain(card
, &card
->tx_chain
);
2024 del_timer_sync(&card
->aneg_timer
);
2025 init_firmware_failed
:
2030 * spider_net_link_phy
2031 * @data: used for pointer to card structure
2034 static void spider_net_link_phy(unsigned long data
)
2036 struct spider_net_card
*card
= (struct spider_net_card
*)data
;
2037 struct mii_phy
*phy
= &card
->phy
;
2039 /* if link didn't come up after SPIDER_NET_ANEG_TIMEOUT tries, setup phy again */
2040 if (card
->aneg_count
> SPIDER_NET_ANEG_TIMEOUT
) {
2042 pr_debug("%s: link is down trying to bring it up\n",
2043 card
->netdev
->name
);
2045 switch (card
->medium
) {
2046 case BCM54XX_COPPER
:
2047 /* enable fiber with autonegotiation first */
2048 if (phy
->def
->ops
->enable_fiber
)
2049 phy
->def
->ops
->enable_fiber(phy
, 1);
2050 card
->medium
= BCM54XX_FIBER
;
2054 /* fiber didn't come up, try to disable fiber autoneg */
2055 if (phy
->def
->ops
->enable_fiber
)
2056 phy
->def
->ops
->enable_fiber(phy
, 0);
2057 card
->medium
= BCM54XX_UNKNOWN
;
2060 case BCM54XX_UNKNOWN
:
2061 /* copper, fiber with and without failed,
2062 * retry from beginning */
2063 spider_net_setup_aneg(card
);
2064 card
->medium
= BCM54XX_COPPER
;
2068 card
->aneg_count
= 0;
2069 mod_timer(&card
->aneg_timer
, jiffies
+ SPIDER_NET_ANEG_TIMER
);
2073 /* link still not up, try again later */
2074 if (!(phy
->def
->ops
->poll_link(phy
))) {
2076 mod_timer(&card
->aneg_timer
, jiffies
+ SPIDER_NET_ANEG_TIMER
);
2080 /* link came up, get abilities */
2081 phy
->def
->ops
->read_link(phy
);
2083 spider_net_write_reg(card
, SPIDER_NET_GMACST
,
2084 spider_net_read_reg(card
, SPIDER_NET_GMACST
));
2085 spider_net_write_reg(card
, SPIDER_NET_GMACINTEN
, 0x4);
2087 if (phy
->speed
== 1000)
2088 spider_net_write_reg(card
, SPIDER_NET_GMACMODE
, 0x00000001);
2090 spider_net_write_reg(card
, SPIDER_NET_GMACMODE
, 0);
2092 card
->aneg_count
= 0;
2094 pr_info("%s: link up, %i Mbps, %s-duplex %sautoneg.\n",
2095 card
->netdev
->name
, phy
->speed
,
2096 phy
->duplex
== 1 ? "Full" : "Half",
2097 phy
->autoneg
== 1 ? "" : "no ");
2101 * spider_net_setup_phy - setup PHY
2102 * @card: card structure
2104 * returns 0 on success, <0 on failure
2106 * spider_net_setup_phy is used as part of spider_net_probe.
2109 spider_net_setup_phy(struct spider_net_card
*card
)
2111 struct mii_phy
*phy
= &card
->phy
;
2113 spider_net_write_reg(card
, SPIDER_NET_GDTDMASEL
,
2114 SPIDER_NET_DMASEL_VALUE
);
2115 spider_net_write_reg(card
, SPIDER_NET_GPCCTRL
,
2116 SPIDER_NET_PHY_CTRL_VALUE
);
2118 phy
->dev
= card
->netdev
;
2119 phy
->mdio_read
= spider_net_read_phy
;
2120 phy
->mdio_write
= spider_net_write_phy
;
2122 for (phy
->mii_id
= 1; phy
->mii_id
<= 31; phy
->mii_id
++) {
2124 id
= spider_net_read_phy(card
->netdev
, phy
->mii_id
, MII_BMSR
);
2125 if (id
!= 0x0000 && id
!= 0xffff) {
2126 if (!mii_phy_probe(phy
, phy
->mii_id
)) {
2127 pr_info("Found %s.\n", phy
->def
->name
);
2137 * spider_net_workaround_rxramfull - work around firmware bug
2138 * @card: card structure
2143 spider_net_workaround_rxramfull(struct spider_net_card
*card
)
2145 int i
, sequencer
= 0;
2148 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
2149 SPIDER_NET_CKRCTRL_RUN_VALUE
);
2151 /* empty sequencer data */
2152 for (sequencer
= 0; sequencer
< SPIDER_NET_FIRMWARE_SEQS
;
2154 spider_net_write_reg(card
, SPIDER_NET_GSnPRGADR
+
2155 sequencer
* 8, 0x0);
2156 for (i
= 0; i
< SPIDER_NET_FIRMWARE_SEQWORDS
; i
++) {
2157 spider_net_write_reg(card
, SPIDER_NET_GSnPRGDAT
+
2158 sequencer
* 8, 0x0);
2162 /* set sequencer operation */
2163 spider_net_write_reg(card
, SPIDER_NET_GSINIT
, 0x000000fe);
2166 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
2167 SPIDER_NET_CKRCTRL_STOP_VALUE
);
2171 * spider_net_stop - called upon ifconfig down
2172 * @netdev: interface device structure
2177 spider_net_stop(struct net_device
*netdev
)
2179 struct spider_net_card
*card
= netdev_priv(netdev
);
2181 napi_disable(&card
->napi
);
2182 netif_carrier_off(netdev
);
2183 netif_stop_queue(netdev
);
2184 del_timer_sync(&card
->tx_timer
);
2185 del_timer_sync(&card
->aneg_timer
);
2187 spider_net_disable_interrupts(card
);
2189 free_irq(netdev
->irq
, netdev
);
2191 spider_net_write_reg(card
, SPIDER_NET_GDTDMACCNTR
,
2192 SPIDER_NET_DMA_TX_FEND_VALUE
);
2194 /* turn off DMA, force end */
2195 spider_net_disable_rxdmac(card
);
2197 /* release chains */
2198 spider_net_release_tx_chain(card
, 1);
2199 spider_net_free_rx_chain_contents(card
);
2201 spider_net_free_chain(card
, &card
->tx_chain
);
2202 spider_net_free_chain(card
, &card
->rx_chain
);
2208 * spider_net_tx_timeout_task - task scheduled by the watchdog timeout
2209 * function (to be called not under interrupt status)
2210 * @data: data, is interface device structure
2212 * called as task when tx hangs, resets interface (if interface is up)
2215 spider_net_tx_timeout_task(struct work_struct
*work
)
2217 struct spider_net_card
*card
=
2218 container_of(work
, struct spider_net_card
, tx_timeout_task
);
2219 struct net_device
*netdev
= card
->netdev
;
2221 if (!(netdev
->flags
& IFF_UP
))
2224 netif_device_detach(netdev
);
2225 spider_net_stop(netdev
);
2227 spider_net_workaround_rxramfull(card
);
2228 spider_net_init_card(card
);
2230 if (spider_net_setup_phy(card
))
2233 spider_net_open(netdev
);
2234 spider_net_kick_tx_dma(card
);
2235 netif_device_attach(netdev
);
2238 atomic_dec(&card
->tx_timeout_task_counter
);
2242 * spider_net_tx_timeout - called when the tx timeout watchdog kicks in.
2243 * @netdev: interface device structure
2245 * called, if tx hangs. Schedules a task that resets the interface
2248 spider_net_tx_timeout(struct net_device
*netdev
)
2250 struct spider_net_card
*card
;
2252 card
= netdev_priv(netdev
);
2253 atomic_inc(&card
->tx_timeout_task_counter
);
2254 if (netdev
->flags
& IFF_UP
)
2255 schedule_work(&card
->tx_timeout_task
);
2257 atomic_dec(&card
->tx_timeout_task_counter
);
2258 card
->spider_stats
.tx_timeouts
++;
2261 static const struct net_device_ops spider_net_ops
= {
2262 .ndo_open
= spider_net_open
,
2263 .ndo_stop
= spider_net_stop
,
2264 .ndo_start_xmit
= spider_net_xmit
,
2265 .ndo_set_multicast_list
= spider_net_set_multi
,
2266 .ndo_set_mac_address
= spider_net_set_mac
,
2267 .ndo_change_mtu
= spider_net_change_mtu
,
2268 .ndo_do_ioctl
= spider_net_do_ioctl
,
2269 .ndo_tx_timeout
= spider_net_tx_timeout
,
2270 .ndo_validate_addr
= eth_validate_addr
,
2272 #ifdef CONFIG_NET_POLL_CONTROLLER
2273 /* poll controller */
2274 .ndo_poll_controller
= spider_net_poll_controller
,
2275 #endif /* CONFIG_NET_POLL_CONTROLLER */
2279 * spider_net_setup_netdev_ops - initialization of net_device operations
2280 * @netdev: net_device structure
2282 * fills out function pointers in the net_device structure
2285 spider_net_setup_netdev_ops(struct net_device
*netdev
)
2287 netdev
->netdev_ops
= &spider_net_ops
;
2288 netdev
->watchdog_timeo
= SPIDER_NET_WATCHDOG_TIMEOUT
;
2290 netdev
->ethtool_ops
= &spider_net_ethtool_ops
;
2294 * spider_net_setup_netdev - initialization of net_device
2295 * @card: card structure
2297 * Returns 0 on success or <0 on failure
2299 * spider_net_setup_netdev initializes the net_device structure
2302 spider_net_setup_netdev(struct spider_net_card
*card
)
2305 struct net_device
*netdev
= card
->netdev
;
2306 struct device_node
*dn
;
2307 struct sockaddr addr
;
2310 SET_NETDEV_DEV(netdev
, &card
->pdev
->dev
);
2312 pci_set_drvdata(card
->pdev
, netdev
);
2314 init_timer(&card
->tx_timer
);
2315 card
->tx_timer
.function
=
2316 (void (*)(unsigned long)) spider_net_cleanup_tx_ring
;
2317 card
->tx_timer
.data
= (unsigned long) card
;
2318 netdev
->irq
= card
->pdev
->irq
;
2320 card
->aneg_count
= 0;
2321 init_timer(&card
->aneg_timer
);
2322 card
->aneg_timer
.function
= spider_net_link_phy
;
2323 card
->aneg_timer
.data
= (unsigned long) card
;
2325 card
->options
.rx_csum
= SPIDER_NET_RX_CSUM_DEFAULT
;
2327 netif_napi_add(netdev
, &card
->napi
,
2328 spider_net_poll
, SPIDER_NET_NAPI_WEIGHT
);
2330 spider_net_setup_netdev_ops(netdev
);
2332 netdev
->features
= NETIF_F_IP_CSUM
| NETIF_F_LLTX
;
2333 /* some time: NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
2334 * NETIF_F_HW_VLAN_FILTER */
2336 netdev
->irq
= card
->pdev
->irq
;
2337 card
->num_rx_ints
= 0;
2338 card
->ignore_rx_ramfull
= 0;
2340 dn
= pci_device_to_OF_node(card
->pdev
);
2344 mac
= of_get_property(dn
, "local-mac-address", NULL
);
2347 memcpy(addr
.sa_data
, mac
, ETH_ALEN
);
2349 result
= spider_net_set_mac(netdev
, &addr
);
2350 if ((result
) && (netif_msg_probe(card
)))
2351 dev_err(&card
->netdev
->dev
,
2352 "Failed to set MAC address: %i\n", result
);
2354 result
= register_netdev(netdev
);
2356 if (netif_msg_probe(card
))
2357 dev_err(&card
->netdev
->dev
,
2358 "Couldn't register net_device: %i\n", result
);
2362 if (netif_msg_probe(card
))
2363 pr_info("Initialized device %s.\n", netdev
->name
);
2369 * spider_net_alloc_card - allocates net_device and card structure
2371 * returns the card structure or NULL in case of errors
2373 * the card and net_device structures are linked to each other
2375 static struct spider_net_card
*
2376 spider_net_alloc_card(void)
2378 struct net_device
*netdev
;
2379 struct spider_net_card
*card
;
2382 alloc_size
= sizeof(struct spider_net_card
) +
2383 (tx_descriptors
+ rx_descriptors
) * sizeof(struct spider_net_descr
);
2384 netdev
= alloc_etherdev(alloc_size
);
2388 card
= netdev_priv(netdev
);
2389 card
->netdev
= netdev
;
2390 card
->msg_enable
= SPIDER_NET_DEFAULT_MSG
;
2391 INIT_WORK(&card
->tx_timeout_task
, spider_net_tx_timeout_task
);
2392 init_waitqueue_head(&card
->waitq
);
2393 atomic_set(&card
->tx_timeout_task_counter
, 0);
2395 card
->rx_chain
.num_desc
= rx_descriptors
;
2396 card
->rx_chain
.ring
= card
->darray
;
2397 card
->tx_chain
.num_desc
= tx_descriptors
;
2398 card
->tx_chain
.ring
= card
->darray
+ rx_descriptors
;
2404 * spider_net_undo_pci_setup - releases PCI ressources
2405 * @card: card structure
2407 * spider_net_undo_pci_setup releases the mapped regions
2410 spider_net_undo_pci_setup(struct spider_net_card
*card
)
2412 iounmap(card
->regs
);
2413 pci_release_regions(card
->pdev
);
2417 * spider_net_setup_pci_dev - sets up the device in terms of PCI operations
2420 * Returns the card structure or NULL if any errors occur
2422 * spider_net_setup_pci_dev initializes pdev and together with the
2423 * functions called in spider_net_open configures the device so that
2424 * data can be transferred over it
2425 * The net_device structure is attached to the card structure, if the
2426 * function returns without error.
2428 static struct spider_net_card
*
2429 spider_net_setup_pci_dev(struct pci_dev
*pdev
)
2431 struct spider_net_card
*card
;
2432 unsigned long mmio_start
, mmio_len
;
2434 if (pci_enable_device(pdev
)) {
2435 dev_err(&pdev
->dev
, "Couldn't enable PCI device\n");
2439 if (!(pci_resource_flags(pdev
, 0) & IORESOURCE_MEM
)) {
2441 "Couldn't find proper PCI device base address.\n");
2442 goto out_disable_dev
;
2445 if (pci_request_regions(pdev
, spider_net_driver_name
)) {
2447 "Couldn't obtain PCI resources, aborting.\n");
2448 goto out_disable_dev
;
2451 pci_set_master(pdev
);
2453 card
= spider_net_alloc_card();
2456 "Couldn't allocate net_device structure, aborting.\n");
2457 goto out_release_regions
;
2461 /* fetch base address and length of first resource */
2462 mmio_start
= pci_resource_start(pdev
, 0);
2463 mmio_len
= pci_resource_len(pdev
, 0);
2465 card
->netdev
->mem_start
= mmio_start
;
2466 card
->netdev
->mem_end
= mmio_start
+ mmio_len
;
2467 card
->regs
= ioremap(mmio_start
, mmio_len
);
2471 "Couldn't obtain PCI resources, aborting.\n");
2472 goto out_release_regions
;
2477 out_release_regions
:
2478 pci_release_regions(pdev
);
2480 pci_disable_device(pdev
);
2481 pci_set_drvdata(pdev
, NULL
);
2486 * spider_net_probe - initialization of a device
2488 * @ent: entry in the device id list
2490 * Returns 0 on success, <0 on failure
2492 * spider_net_probe initializes pdev and registers a net_device
2493 * structure for it. After that, the device can be ifconfig'ed up
2495 static int __devinit
2496 spider_net_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
2499 struct spider_net_card
*card
;
2501 card
= spider_net_setup_pci_dev(pdev
);
2505 spider_net_workaround_rxramfull(card
);
2506 spider_net_init_card(card
);
2508 err
= spider_net_setup_phy(card
);
2512 err
= spider_net_setup_netdev(card
);
2519 spider_net_undo_pci_setup(card
);
2520 free_netdev(card
->netdev
);
2526 * spider_net_remove - removal of a device
2529 * Returns 0 on success, <0 on failure
2531 * spider_net_remove is called to remove the device and unregisters the
2534 static void __devexit
2535 spider_net_remove(struct pci_dev
*pdev
)
2537 struct net_device
*netdev
;
2538 struct spider_net_card
*card
;
2540 netdev
= pci_get_drvdata(pdev
);
2541 card
= netdev_priv(netdev
);
2543 wait_event(card
->waitq
,
2544 atomic_read(&card
->tx_timeout_task_counter
) == 0);
2546 unregister_netdev(netdev
);
2548 /* switch off card */
2549 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
2550 SPIDER_NET_CKRCTRL_STOP_VALUE
);
2551 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
2552 SPIDER_NET_CKRCTRL_RUN_VALUE
);
2554 spider_net_undo_pci_setup(card
);
2555 free_netdev(netdev
);
2558 static struct pci_driver spider_net_driver
= {
2559 .name
= spider_net_driver_name
,
2560 .id_table
= spider_net_pci_tbl
,
2561 .probe
= spider_net_probe
,
2562 .remove
= __devexit_p(spider_net_remove
)
2566 * spider_net_init - init function when the driver is loaded
2568 * spider_net_init registers the device driver
2570 static int __init
spider_net_init(void)
2572 printk(KERN_INFO
"Spidernet version %s.\n", VERSION
);
2574 if (rx_descriptors
< SPIDER_NET_RX_DESCRIPTORS_MIN
) {
2575 rx_descriptors
= SPIDER_NET_RX_DESCRIPTORS_MIN
;
2576 pr_info("adjusting rx descriptors to %i.\n", rx_descriptors
);
2578 if (rx_descriptors
> SPIDER_NET_RX_DESCRIPTORS_MAX
) {
2579 rx_descriptors
= SPIDER_NET_RX_DESCRIPTORS_MAX
;
2580 pr_info("adjusting rx descriptors to %i.\n", rx_descriptors
);
2582 if (tx_descriptors
< SPIDER_NET_TX_DESCRIPTORS_MIN
) {
2583 tx_descriptors
= SPIDER_NET_TX_DESCRIPTORS_MIN
;
2584 pr_info("adjusting tx descriptors to %i.\n", tx_descriptors
);
2586 if (tx_descriptors
> SPIDER_NET_TX_DESCRIPTORS_MAX
) {
2587 tx_descriptors
= SPIDER_NET_TX_DESCRIPTORS_MAX
;
2588 pr_info("adjusting tx descriptors to %i.\n", tx_descriptors
);
2591 return pci_register_driver(&spider_net_driver
);
2595 * spider_net_cleanup - exit function when driver is unloaded
2597 * spider_net_cleanup unregisters the device driver
2599 static void __exit
spider_net_cleanup(void)
2601 pci_unregister_driver(&spider_net_driver
);
2604 module_init(spider_net_init
);
2605 module_exit(spider_net_cleanup
);