ALSA: fix hda AZX_DCAPS_NO_TCSEL quirk check in driver_caps
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / mmc / core / sdio_ops.c
blobf087d876c5731ebb0feefe14244811936ddefa70
1 /*
2 * linux/drivers/mmc/sdio_ops.c
4 * Copyright 2006-2007 Pierre Ossman
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or (at
9 * your option) any later version.
12 #include <linux/scatterlist.h>
14 #include <linux/mmc/host.h>
15 #include <linux/mmc/card.h>
16 #include <linux/mmc/mmc.h>
17 #include <linux/mmc/sdio.h>
19 #include "core.h"
20 #include "sdio_ops.h"
22 int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
24 struct mmc_command cmd = {0};
25 int i, err = 0;
27 BUG_ON(!host);
29 cmd.opcode = SD_IO_SEND_OP_COND;
30 cmd.arg = ocr;
31 cmd.flags = MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR;
33 for (i = 100; i; i--) {
34 err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
35 if (err)
36 break;
38 /* if we're just probing, do a single pass */
39 if (ocr == 0)
40 break;
42 /* otherwise wait until reset completes */
43 if (mmc_host_is_spi(host)) {
45 * Both R1_SPI_IDLE and MMC_CARD_BUSY indicate
46 * an initialized card under SPI, but some cards
47 * (Marvell's) only behave when looking at this
48 * one.
50 if (cmd.resp[1] & MMC_CARD_BUSY)
51 break;
52 } else {
53 if (cmd.resp[0] & MMC_CARD_BUSY)
54 break;
57 err = -ETIMEDOUT;
59 mmc_delay(10);
62 if (rocr)
63 *rocr = cmd.resp[mmc_host_is_spi(host) ? 1 : 0];
65 return err;
68 static int mmc_io_rw_direct_host(struct mmc_host *host, int write, unsigned fn,
69 unsigned addr, u8 in, u8 *out)
71 struct mmc_command cmd = {0};
72 int err;
74 BUG_ON(!host);
75 BUG_ON(fn > 7);
77 /* sanity check */
78 if (addr & ~0x1FFFF)
79 return -EINVAL;
81 cmd.opcode = SD_IO_RW_DIRECT;
82 cmd.arg = write ? 0x80000000 : 0x00000000;
83 cmd.arg |= fn << 28;
84 cmd.arg |= (write && out) ? 0x08000000 : 0x00000000;
85 cmd.arg |= addr << 9;
86 cmd.arg |= in;
87 cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC;
89 err = mmc_wait_for_cmd(host, &cmd, 0);
90 if (err)
91 return err;
93 if (mmc_host_is_spi(host)) {
94 /* host driver already reported errors */
95 } else {
96 if (cmd.resp[0] & R5_ERROR)
97 return -EIO;
98 if (cmd.resp[0] & R5_FUNCTION_NUMBER)
99 return -EINVAL;
100 if (cmd.resp[0] & R5_OUT_OF_RANGE)
101 return -ERANGE;
104 if (out) {
105 if (mmc_host_is_spi(host))
106 *out = (cmd.resp[0] >> 8) & 0xFF;
107 else
108 *out = cmd.resp[0] & 0xFF;
111 return 0;
114 int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
115 unsigned addr, u8 in, u8 *out)
117 BUG_ON(!card);
118 return mmc_io_rw_direct_host(card->host, write, fn, addr, in, out);
121 int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
122 unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz)
124 struct mmc_request mrq = {0};
125 struct mmc_command cmd = {0};
126 struct mmc_data data = {0};
127 struct scatterlist sg;
129 BUG_ON(!card);
130 BUG_ON(fn > 7);
131 BUG_ON(blocks == 1 && blksz > 512);
132 WARN_ON(blocks == 0);
133 WARN_ON(blksz == 0);
135 /* sanity check */
136 if (addr & ~0x1FFFF)
137 return -EINVAL;
139 mrq.cmd = &cmd;
140 mrq.data = &data;
142 cmd.opcode = SD_IO_RW_EXTENDED;
143 cmd.arg = write ? 0x80000000 : 0x00000000;
144 cmd.arg |= fn << 28;
145 cmd.arg |= incr_addr ? 0x04000000 : 0x00000000;
146 cmd.arg |= addr << 9;
147 if (blocks == 1 && blksz <= 512)
148 cmd.arg |= (blksz == 512) ? 0 : blksz; /* byte mode */
149 else
150 cmd.arg |= 0x08000000 | blocks; /* block mode */
151 cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
153 data.blksz = blksz;
154 data.blocks = blocks;
155 data.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
156 data.sg = &sg;
157 data.sg_len = 1;
159 sg_init_one(&sg, buf, blksz * blocks);
161 mmc_set_data_timeout(&data, card);
163 mmc_wait_for_req(card->host, &mrq);
165 if (cmd.error)
166 return cmd.error;
167 if (data.error)
168 return data.error;
170 if (mmc_host_is_spi(card->host)) {
171 /* host driver already reported errors */
172 } else {
173 if (cmd.resp[0] & R5_ERROR)
174 return -EIO;
175 if (cmd.resp[0] & R5_FUNCTION_NUMBER)
176 return -EINVAL;
177 if (cmd.resp[0] & R5_OUT_OF_RANGE)
178 return -ERANGE;
181 return 0;
184 int sdio_reset(struct mmc_host *host)
186 int ret;
187 u8 abort;
189 /* SDIO Simplified Specification V2.0, 4.4 Reset for SDIO */
191 ret = mmc_io_rw_direct_host(host, 0, 0, SDIO_CCCR_ABORT, 0, &abort);
192 if (ret)
193 abort = 0x08;
194 else
195 abort |= 0x08;
197 ret = mmc_io_rw_direct_host(host, 1, 0, SDIO_CCCR_ABORT, abort, NULL);
198 return ret;