fat: fix VFAT_IOCTL_READDIR_xxx and cleanup for userland
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / ata / sata_sil24.c
blob84ffcc26a74bec944506096c20e578a49c516bcf
1 /*
2 * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers
4 * Copyright 2005 Tejun Heo
6 * Based on preview driver from Silicon Image.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2, or (at your option) any
11 * later version.
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/pci.h>
23 #include <linux/blkdev.h>
24 #include <linux/delay.h>
25 #include <linux/interrupt.h>
26 #include <linux/dma-mapping.h>
27 #include <linux/device.h>
28 #include <scsi/scsi_host.h>
29 #include <scsi/scsi_cmnd.h>
30 #include <linux/libata.h>
32 #define DRV_NAME "sata_sil24"
33 #define DRV_VERSION "1.1"
36 * Port request block (PRB) 32 bytes
38 struct sil24_prb {
39 __le16 ctrl;
40 __le16 prot;
41 __le32 rx_cnt;
42 u8 fis[6 * 4];
46 * Scatter gather entry (SGE) 16 bytes
48 struct sil24_sge {
49 __le64 addr;
50 __le32 cnt;
51 __le32 flags;
55 * Port multiplier
57 struct sil24_port_multiplier {
58 __le32 diag;
59 __le32 sactive;
62 enum {
63 SIL24_HOST_BAR = 0,
64 SIL24_PORT_BAR = 2,
66 /* sil24 fetches in chunks of 64bytes. The first block
67 * contains the PRB and two SGEs. From the second block, it's
68 * consisted of four SGEs and called SGT. Calculate the
69 * number of SGTs that fit into one page.
71 SIL24_PRB_SZ = sizeof(struct sil24_prb)
72 + 2 * sizeof(struct sil24_sge),
73 SIL24_MAX_SGT = (PAGE_SIZE - SIL24_PRB_SZ)
74 / (4 * sizeof(struct sil24_sge)),
76 /* This will give us one unused SGEs for ATA. This extra SGE
77 * will be used to store CDB for ATAPI devices.
79 SIL24_MAX_SGE = 4 * SIL24_MAX_SGT + 1,
82 * Global controller registers (128 bytes @ BAR0)
84 /* 32 bit regs */
85 HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */
86 HOST_CTRL = 0x40,
87 HOST_IRQ_STAT = 0x44,
88 HOST_PHY_CFG = 0x48,
89 HOST_BIST_CTRL = 0x50,
90 HOST_BIST_PTRN = 0x54,
91 HOST_BIST_STAT = 0x58,
92 HOST_MEM_BIST_STAT = 0x5c,
93 HOST_FLASH_CMD = 0x70,
94 /* 8 bit regs */
95 HOST_FLASH_DATA = 0x74,
96 HOST_TRANSITION_DETECT = 0x75,
97 HOST_GPIO_CTRL = 0x76,
98 HOST_I2C_ADDR = 0x78, /* 32 bit */
99 HOST_I2C_DATA = 0x7c,
100 HOST_I2C_XFER_CNT = 0x7e,
101 HOST_I2C_CTRL = 0x7f,
103 /* HOST_SLOT_STAT bits */
104 HOST_SSTAT_ATTN = (1 << 31),
106 /* HOST_CTRL bits */
107 HOST_CTRL_M66EN = (1 << 16), /* M66EN PCI bus signal */
108 HOST_CTRL_TRDY = (1 << 17), /* latched PCI TRDY */
109 HOST_CTRL_STOP = (1 << 18), /* latched PCI STOP */
110 HOST_CTRL_DEVSEL = (1 << 19), /* latched PCI DEVSEL */
111 HOST_CTRL_REQ64 = (1 << 20), /* latched PCI REQ64 */
112 HOST_CTRL_GLOBAL_RST = (1 << 31), /* global reset */
115 * Port registers
116 * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
118 PORT_REGS_SIZE = 0x2000,
120 PORT_LRAM = 0x0000, /* 31 LRAM slots and PMP regs */
121 PORT_LRAM_SLOT_SZ = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */
123 PORT_PMP = 0x0f80, /* 8 bytes PMP * 16 (128 bytes) */
124 PORT_PMP_STATUS = 0x0000, /* port device status offset */
125 PORT_PMP_QACTIVE = 0x0004, /* port device QActive offset */
126 PORT_PMP_SIZE = 0x0008, /* 8 bytes per PMP */
128 /* 32 bit regs */
129 PORT_CTRL_STAT = 0x1000, /* write: ctrl-set, read: stat */
130 PORT_CTRL_CLR = 0x1004, /* write: ctrl-clear */
131 PORT_IRQ_STAT = 0x1008, /* high: status, low: interrupt */
132 PORT_IRQ_ENABLE_SET = 0x1010, /* write: enable-set */
133 PORT_IRQ_ENABLE_CLR = 0x1014, /* write: enable-clear */
134 PORT_ACTIVATE_UPPER_ADDR= 0x101c,
135 PORT_EXEC_FIFO = 0x1020, /* command execution fifo */
136 PORT_CMD_ERR = 0x1024, /* command error number */
137 PORT_FIS_CFG = 0x1028,
138 PORT_FIFO_THRES = 0x102c,
139 /* 16 bit regs */
140 PORT_DECODE_ERR_CNT = 0x1040,
141 PORT_DECODE_ERR_THRESH = 0x1042,
142 PORT_CRC_ERR_CNT = 0x1044,
143 PORT_CRC_ERR_THRESH = 0x1046,
144 PORT_HSHK_ERR_CNT = 0x1048,
145 PORT_HSHK_ERR_THRESH = 0x104a,
146 /* 32 bit regs */
147 PORT_PHY_CFG = 0x1050,
148 PORT_SLOT_STAT = 0x1800,
149 PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */
150 PORT_CONTEXT = 0x1e04,
151 PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */
152 PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */
153 PORT_SCONTROL = 0x1f00,
154 PORT_SSTATUS = 0x1f04,
155 PORT_SERROR = 0x1f08,
156 PORT_SACTIVE = 0x1f0c,
158 /* PORT_CTRL_STAT bits */
159 PORT_CS_PORT_RST = (1 << 0), /* port reset */
160 PORT_CS_DEV_RST = (1 << 1), /* device reset */
161 PORT_CS_INIT = (1 << 2), /* port initialize */
162 PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */
163 PORT_CS_CDB16 = (1 << 5), /* 0=12b cdb, 1=16b cdb */
164 PORT_CS_PMP_RESUME = (1 << 6), /* PMP resume */
165 PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */
166 PORT_CS_PMP_EN = (1 << 13), /* port multiplier enable */
167 PORT_CS_RDY = (1 << 31), /* port ready to accept commands */
169 /* PORT_IRQ_STAT/ENABLE_SET/CLR */
170 /* bits[11:0] are masked */
171 PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */
172 PORT_IRQ_ERROR = (1 << 1), /* command execution error */
173 PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */
174 PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */
175 PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */
176 PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */
177 PORT_IRQ_UNK_FIS = (1 << 6), /* unknown FIS received */
178 PORT_IRQ_DEV_XCHG = (1 << 7), /* device exchanged */
179 PORT_IRQ_8B10B = (1 << 8), /* 8b/10b decode error threshold */
180 PORT_IRQ_CRC = (1 << 9), /* CRC error threshold */
181 PORT_IRQ_HANDSHAKE = (1 << 10), /* handshake error threshold */
182 PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */
184 DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR |
185 PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG |
186 PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_NOTIFY,
188 /* bits[27:16] are unmasked (raw) */
189 PORT_IRQ_RAW_SHIFT = 16,
190 PORT_IRQ_MASKED_MASK = 0x7ff,
191 PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT),
193 /* ENABLE_SET/CLR specific, intr steering - 2 bit field */
194 PORT_IRQ_STEER_SHIFT = 30,
195 PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT),
197 /* PORT_CMD_ERR constants */
198 PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */
199 PORT_CERR_SDB = 2, /* Error bit in SDB FIS */
200 PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */
201 PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */
202 PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */
203 PORT_CERR_DIRECTION = 6, /* Data direction mismatch */
204 PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */
205 PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */
206 PORT_CERR_PKT_PROT = 11, /* DIR invalid in 1st PIO setup of ATAPI */
207 PORT_CERR_SGT_BOUNDARY = 16, /* PLD ecode 00 - SGT not on qword boundary */
208 PORT_CERR_SGT_TGTABRT = 17, /* PLD ecode 01 - target abort */
209 PORT_CERR_SGT_MSTABRT = 18, /* PLD ecode 10 - master abort */
210 PORT_CERR_SGT_PCIPERR = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */
211 PORT_CERR_CMD_BOUNDARY = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */
212 PORT_CERR_CMD_TGTABRT = 25, /* ctrl[15:13] 010 - target abort */
213 PORT_CERR_CMD_MSTABRT = 26, /* ctrl[15:13] 100 - master abort */
214 PORT_CERR_CMD_PCIPERR = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */
215 PORT_CERR_XFR_UNDEF = 32, /* PSD ecode 00 - undefined */
216 PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */
217 PORT_CERR_XFR_MSTABRT = 34, /* PSD ecode 10 - master abort */
218 PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */
219 PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */
221 /* bits of PRB control field */
222 PRB_CTRL_PROTOCOL = (1 << 0), /* override def. ATA protocol */
223 PRB_CTRL_PACKET_READ = (1 << 4), /* PACKET cmd read */
224 PRB_CTRL_PACKET_WRITE = (1 << 5), /* PACKET cmd write */
225 PRB_CTRL_NIEN = (1 << 6), /* Mask completion irq */
226 PRB_CTRL_SRST = (1 << 7), /* Soft reset request (ign BSY?) */
228 /* PRB protocol field */
229 PRB_PROT_PACKET = (1 << 0),
230 PRB_PROT_TCQ = (1 << 1),
231 PRB_PROT_NCQ = (1 << 2),
232 PRB_PROT_READ = (1 << 3),
233 PRB_PROT_WRITE = (1 << 4),
234 PRB_PROT_TRANSPARENT = (1 << 5),
237 * Other constants
239 SGE_TRM = (1 << 31), /* Last SGE in chain */
240 SGE_LNK = (1 << 30), /* linked list
241 Points to SGT, not SGE */
242 SGE_DRD = (1 << 29), /* discard data read (/dev/null)
243 data address ignored */
245 SIL24_MAX_CMDS = 31,
247 /* board id */
248 BID_SIL3124 = 0,
249 BID_SIL3132 = 1,
250 BID_SIL3131 = 2,
252 /* host flags */
253 SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
254 ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
255 ATA_FLAG_NCQ | ATA_FLAG_ACPI_SATA |
256 ATA_FLAG_AN | ATA_FLAG_PMP,
257 SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */
259 IRQ_STAT_4PORTS = 0xf,
262 struct sil24_ata_block {
263 struct sil24_prb prb;
264 struct sil24_sge sge[SIL24_MAX_SGE];
267 struct sil24_atapi_block {
268 struct sil24_prb prb;
269 u8 cdb[16];
270 struct sil24_sge sge[SIL24_MAX_SGE];
273 union sil24_cmd_block {
274 struct sil24_ata_block ata;
275 struct sil24_atapi_block atapi;
278 static struct sil24_cerr_info {
279 unsigned int err_mask, action;
280 const char *desc;
281 } sil24_cerr_db[] = {
282 [0] = { AC_ERR_DEV, 0,
283 "device error" },
284 [PORT_CERR_DEV] = { AC_ERR_DEV, 0,
285 "device error via D2H FIS" },
286 [PORT_CERR_SDB] = { AC_ERR_DEV, 0,
287 "device error via SDB FIS" },
288 [PORT_CERR_DATA] = { AC_ERR_ATA_BUS, ATA_EH_RESET,
289 "error in data FIS" },
290 [PORT_CERR_SEND] = { AC_ERR_ATA_BUS, ATA_EH_RESET,
291 "failed to transmit command FIS" },
292 [PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_RESET,
293 "protocol mismatch" },
294 [PORT_CERR_DIRECTION] = { AC_ERR_HSM, ATA_EH_RESET,
295 "data directon mismatch" },
296 [PORT_CERR_UNDERRUN] = { AC_ERR_HSM, ATA_EH_RESET,
297 "ran out of SGEs while writing" },
298 [PORT_CERR_OVERRUN] = { AC_ERR_HSM, ATA_EH_RESET,
299 "ran out of SGEs while reading" },
300 [PORT_CERR_PKT_PROT] = { AC_ERR_HSM, ATA_EH_RESET,
301 "invalid data directon for ATAPI CDB" },
302 [PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET,
303 "SGT not on qword boundary" },
304 [PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
305 "PCI target abort while fetching SGT" },
306 [PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
307 "PCI master abort while fetching SGT" },
308 [PORT_CERR_SGT_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
309 "PCI parity error while fetching SGT" },
310 [PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET,
311 "PRB not on qword boundary" },
312 [PORT_CERR_CMD_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
313 "PCI target abort while fetching PRB" },
314 [PORT_CERR_CMD_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
315 "PCI master abort while fetching PRB" },
316 [PORT_CERR_CMD_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
317 "PCI parity error while fetching PRB" },
318 [PORT_CERR_XFR_UNDEF] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
319 "undefined error while transferring data" },
320 [PORT_CERR_XFR_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
321 "PCI target abort while transferring data" },
322 [PORT_CERR_XFR_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
323 "PCI master abort while transferring data" },
324 [PORT_CERR_XFR_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
325 "PCI parity error while transferring data" },
326 [PORT_CERR_SENDSERVICE] = { AC_ERR_HSM, ATA_EH_RESET,
327 "FIS received while sending service FIS" },
331 * ap->private_data
333 * The preview driver always returned 0 for status. We emulate it
334 * here from the previous interrupt.
336 struct sil24_port_priv {
337 union sil24_cmd_block *cmd_block; /* 32 cmd blocks */
338 dma_addr_t cmd_block_dma; /* DMA base addr for them */
339 int do_port_rst;
342 static void sil24_dev_config(struct ata_device *dev);
343 static int sil24_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val);
344 static int sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
345 static int sil24_qc_defer(struct ata_queued_cmd *qc);
346 static void sil24_qc_prep(struct ata_queued_cmd *qc);
347 static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
348 static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc);
349 static void sil24_pmp_attach(struct ata_port *ap);
350 static void sil24_pmp_detach(struct ata_port *ap);
351 static void sil24_freeze(struct ata_port *ap);
352 static void sil24_thaw(struct ata_port *ap);
353 static int sil24_softreset(struct ata_link *link, unsigned int *class,
354 unsigned long deadline);
355 static int sil24_hardreset(struct ata_link *link, unsigned int *class,
356 unsigned long deadline);
357 static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
358 unsigned long deadline);
359 static void sil24_error_handler(struct ata_port *ap);
360 static void sil24_post_internal_cmd(struct ata_queued_cmd *qc);
361 static int sil24_port_start(struct ata_port *ap);
362 static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
363 #ifdef CONFIG_PM
364 static int sil24_pci_device_resume(struct pci_dev *pdev);
365 static int sil24_port_resume(struct ata_port *ap);
366 #endif
368 static const struct pci_device_id sil24_pci_tbl[] = {
369 { PCI_VDEVICE(CMD, 0x3124), BID_SIL3124 },
370 { PCI_VDEVICE(INTEL, 0x3124), BID_SIL3124 },
371 { PCI_VDEVICE(CMD, 0x3132), BID_SIL3132 },
372 { PCI_VDEVICE(CMD, 0x0242), BID_SIL3132 },
373 { PCI_VDEVICE(CMD, 0x0244), BID_SIL3132 },
374 { PCI_VDEVICE(CMD, 0x3131), BID_SIL3131 },
375 { PCI_VDEVICE(CMD, 0x3531), BID_SIL3131 },
377 { } /* terminate list */
380 static struct pci_driver sil24_pci_driver = {
381 .name = DRV_NAME,
382 .id_table = sil24_pci_tbl,
383 .probe = sil24_init_one,
384 .remove = ata_pci_remove_one,
385 #ifdef CONFIG_PM
386 .suspend = ata_pci_device_suspend,
387 .resume = sil24_pci_device_resume,
388 #endif
391 static struct scsi_host_template sil24_sht = {
392 ATA_NCQ_SHT(DRV_NAME),
393 .can_queue = SIL24_MAX_CMDS,
394 .sg_tablesize = SIL24_MAX_SGE,
395 .dma_boundary = ATA_DMA_BOUNDARY,
398 static struct ata_port_operations sil24_ops = {
399 .inherits = &sata_pmp_port_ops,
401 .qc_defer = sil24_qc_defer,
402 .qc_prep = sil24_qc_prep,
403 .qc_issue = sil24_qc_issue,
404 .qc_fill_rtf = sil24_qc_fill_rtf,
406 .freeze = sil24_freeze,
407 .thaw = sil24_thaw,
408 .softreset = sil24_softreset,
409 .hardreset = sil24_hardreset,
410 .pmp_softreset = sil24_softreset,
411 .pmp_hardreset = sil24_pmp_hardreset,
412 .error_handler = sil24_error_handler,
413 .post_internal_cmd = sil24_post_internal_cmd,
414 .dev_config = sil24_dev_config,
416 .scr_read = sil24_scr_read,
417 .scr_write = sil24_scr_write,
418 .pmp_attach = sil24_pmp_attach,
419 .pmp_detach = sil24_pmp_detach,
421 .port_start = sil24_port_start,
422 #ifdef CONFIG_PM
423 .port_resume = sil24_port_resume,
424 #endif
428 * Use bits 30-31 of port_flags to encode available port numbers.
429 * Current maxium is 4.
431 #define SIL24_NPORTS2FLAG(nports) ((((unsigned)(nports) - 1) & 0x3) << 30)
432 #define SIL24_FLAG2NPORTS(flag) ((((flag) >> 30) & 0x3) + 1)
434 static const struct ata_port_info sil24_port_info[] = {
435 /* sil_3124 */
437 .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) |
438 SIL24_FLAG_PCIX_IRQ_WOC,
439 .pio_mask = 0x1f, /* pio0-4 */
440 .mwdma_mask = 0x07, /* mwdma0-2 */
441 .udma_mask = ATA_UDMA5, /* udma0-5 */
442 .port_ops = &sil24_ops,
444 /* sil_3132 */
446 .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2),
447 .pio_mask = 0x1f, /* pio0-4 */
448 .mwdma_mask = 0x07, /* mwdma0-2 */
449 .udma_mask = ATA_UDMA5, /* udma0-5 */
450 .port_ops = &sil24_ops,
452 /* sil_3131/sil_3531 */
454 .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1),
455 .pio_mask = 0x1f, /* pio0-4 */
456 .mwdma_mask = 0x07, /* mwdma0-2 */
457 .udma_mask = ATA_UDMA5, /* udma0-5 */
458 .port_ops = &sil24_ops,
462 static int sil24_tag(int tag)
464 if (unlikely(ata_tag_internal(tag)))
465 return 0;
466 return tag;
469 static unsigned long sil24_port_offset(struct ata_port *ap)
471 return ap->port_no * PORT_REGS_SIZE;
474 static void __iomem *sil24_port_base(struct ata_port *ap)
476 return ap->host->iomap[SIL24_PORT_BAR] + sil24_port_offset(ap);
479 static void sil24_dev_config(struct ata_device *dev)
481 void __iomem *port = sil24_port_base(dev->link->ap);
483 if (dev->cdb_len == 16)
484 writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
485 else
486 writel(PORT_CS_CDB16, port + PORT_CTRL_CLR);
489 static void sil24_read_tf(struct ata_port *ap, int tag, struct ata_taskfile *tf)
491 void __iomem *port = sil24_port_base(ap);
492 struct sil24_prb __iomem *prb;
493 u8 fis[6 * 4];
495 prb = port + PORT_LRAM + sil24_tag(tag) * PORT_LRAM_SLOT_SZ;
496 memcpy_fromio(fis, prb->fis, sizeof(fis));
497 ata_tf_from_fis(fis, tf);
500 static int sil24_scr_map[] = {
501 [SCR_CONTROL] = 0,
502 [SCR_STATUS] = 1,
503 [SCR_ERROR] = 2,
504 [SCR_ACTIVE] = 3,
507 static int sil24_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val)
509 void __iomem *scr_addr = sil24_port_base(ap) + PORT_SCONTROL;
511 if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
512 void __iomem *addr;
513 addr = scr_addr + sil24_scr_map[sc_reg] * 4;
514 *val = readl(scr_addr + sil24_scr_map[sc_reg] * 4);
515 return 0;
517 return -EINVAL;
520 static int sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
522 void __iomem *scr_addr = sil24_port_base(ap) + PORT_SCONTROL;
524 if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
525 void __iomem *addr;
526 addr = scr_addr + sil24_scr_map[sc_reg] * 4;
527 writel(val, scr_addr + sil24_scr_map[sc_reg] * 4);
528 return 0;
530 return -EINVAL;
533 static void sil24_config_port(struct ata_port *ap)
535 void __iomem *port = sil24_port_base(ap);
537 /* configure IRQ WoC */
538 if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
539 writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT);
540 else
541 writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
543 /* zero error counters. */
544 writel(0x8000, port + PORT_DECODE_ERR_THRESH);
545 writel(0x8000, port + PORT_CRC_ERR_THRESH);
546 writel(0x8000, port + PORT_HSHK_ERR_THRESH);
547 writel(0x0000, port + PORT_DECODE_ERR_CNT);
548 writel(0x0000, port + PORT_CRC_ERR_CNT);
549 writel(0x0000, port + PORT_HSHK_ERR_CNT);
551 /* always use 64bit activation */
552 writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
554 /* clear port multiplier enable and resume bits */
555 writel(PORT_CS_PMP_EN | PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR);
558 static void sil24_config_pmp(struct ata_port *ap, int attached)
560 void __iomem *port = sil24_port_base(ap);
562 if (attached)
563 writel(PORT_CS_PMP_EN, port + PORT_CTRL_STAT);
564 else
565 writel(PORT_CS_PMP_EN, port + PORT_CTRL_CLR);
568 static void sil24_clear_pmp(struct ata_port *ap)
570 void __iomem *port = sil24_port_base(ap);
571 int i;
573 writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR);
575 for (i = 0; i < SATA_PMP_MAX_PORTS; i++) {
576 void __iomem *pmp_base = port + PORT_PMP + i * PORT_PMP_SIZE;
578 writel(0, pmp_base + PORT_PMP_STATUS);
579 writel(0, pmp_base + PORT_PMP_QACTIVE);
583 static int sil24_init_port(struct ata_port *ap)
585 void __iomem *port = sil24_port_base(ap);
586 struct sil24_port_priv *pp = ap->private_data;
587 u32 tmp;
589 /* clear PMP error status */
590 if (sata_pmp_attached(ap))
591 sil24_clear_pmp(ap);
593 writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
594 ata_wait_register(port + PORT_CTRL_STAT,
595 PORT_CS_INIT, PORT_CS_INIT, 10, 100);
596 tmp = ata_wait_register(port + PORT_CTRL_STAT,
597 PORT_CS_RDY, 0, 10, 100);
599 if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) {
600 pp->do_port_rst = 1;
601 ap->link.eh_context.i.action |= ATA_EH_RESET;
602 return -EIO;
605 return 0;
608 static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp,
609 const struct ata_taskfile *tf,
610 int is_cmd, u32 ctrl,
611 unsigned long timeout_msec)
613 void __iomem *port = sil24_port_base(ap);
614 struct sil24_port_priv *pp = ap->private_data;
615 struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
616 dma_addr_t paddr = pp->cmd_block_dma;
617 u32 irq_enabled, irq_mask, irq_stat;
618 int rc;
620 prb->ctrl = cpu_to_le16(ctrl);
621 ata_tf_to_fis(tf, pmp, is_cmd, prb->fis);
623 /* temporarily plug completion and error interrupts */
624 irq_enabled = readl(port + PORT_IRQ_ENABLE_SET);
625 writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR);
627 writel((u32)paddr, port + PORT_CMD_ACTIVATE);
628 writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
630 irq_mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT;
631 irq_stat = ata_wait_register(port + PORT_IRQ_STAT, irq_mask, 0x0,
632 10, timeout_msec);
634 writel(irq_mask, port + PORT_IRQ_STAT); /* clear IRQs */
635 irq_stat >>= PORT_IRQ_RAW_SHIFT;
637 if (irq_stat & PORT_IRQ_COMPLETE)
638 rc = 0;
639 else {
640 /* force port into known state */
641 sil24_init_port(ap);
643 if (irq_stat & PORT_IRQ_ERROR)
644 rc = -EIO;
645 else
646 rc = -EBUSY;
649 /* restore IRQ enabled */
650 writel(irq_enabled, port + PORT_IRQ_ENABLE_SET);
652 return rc;
655 static int sil24_softreset(struct ata_link *link, unsigned int *class,
656 unsigned long deadline)
658 struct ata_port *ap = link->ap;
659 int pmp = sata_srst_pmp(link);
660 unsigned long timeout_msec = 0;
661 struct ata_taskfile tf;
662 const char *reason;
663 int rc;
665 DPRINTK("ENTER\n");
667 /* put the port into known state */
668 if (sil24_init_port(ap)) {
669 reason = "port not ready";
670 goto err;
673 /* do SRST */
674 if (time_after(deadline, jiffies))
675 timeout_msec = jiffies_to_msecs(deadline - jiffies);
677 ata_tf_init(link->device, &tf); /* doesn't really matter */
678 rc = sil24_exec_polled_cmd(ap, pmp, &tf, 0, PRB_CTRL_SRST,
679 timeout_msec);
680 if (rc == -EBUSY) {
681 reason = "timeout";
682 goto err;
683 } else if (rc) {
684 reason = "SRST command error";
685 goto err;
688 sil24_read_tf(ap, 0, &tf);
689 *class = ata_dev_classify(&tf);
691 DPRINTK("EXIT, class=%u\n", *class);
692 return 0;
694 err:
695 ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason);
696 return -EIO;
699 static int sil24_hardreset(struct ata_link *link, unsigned int *class,
700 unsigned long deadline)
702 struct ata_port *ap = link->ap;
703 void __iomem *port = sil24_port_base(ap);
704 struct sil24_port_priv *pp = ap->private_data;
705 int did_port_rst = 0;
706 const char *reason;
707 int tout_msec, rc;
708 u32 tmp;
710 retry:
711 /* Sometimes, DEV_RST is not enough to recover the controller.
712 * This happens often after PM DMA CS errata.
714 if (pp->do_port_rst) {
715 ata_port_printk(ap, KERN_WARNING, "controller in dubious "
716 "state, performing PORT_RST\n");
718 writel(PORT_CS_PORT_RST, port + PORT_CTRL_STAT);
719 msleep(10);
720 writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
721 ata_wait_register(port + PORT_CTRL_STAT, PORT_CS_RDY, 0,
722 10, 5000);
724 /* restore port configuration */
725 sil24_config_port(ap);
726 sil24_config_pmp(ap, ap->nr_pmp_links);
728 pp->do_port_rst = 0;
729 did_port_rst = 1;
732 /* sil24 does the right thing(tm) without any protection */
733 sata_set_spd(link);
735 tout_msec = 100;
736 if (ata_link_online(link))
737 tout_msec = 5000;
739 writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
740 tmp = ata_wait_register(port + PORT_CTRL_STAT,
741 PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10,
742 tout_msec);
744 /* SStatus oscillates between zero and valid status after
745 * DEV_RST, debounce it.
747 rc = sata_link_debounce(link, sata_deb_timing_long, deadline);
748 if (rc) {
749 reason = "PHY debouncing failed";
750 goto err;
753 if (tmp & PORT_CS_DEV_RST) {
754 if (ata_link_offline(link))
755 return 0;
756 reason = "link not ready";
757 goto err;
760 /* Sil24 doesn't store signature FIS after hardreset, so we
761 * can't wait for BSY to clear. Some devices take a long time
762 * to get ready and those devices will choke if we don't wait
763 * for BSY clearance here. Tell libata to perform follow-up
764 * softreset.
766 return -EAGAIN;
768 err:
769 if (!did_port_rst) {
770 pp->do_port_rst = 1;
771 goto retry;
774 ata_link_printk(link, KERN_ERR, "hardreset failed (%s)\n", reason);
775 return -EIO;
778 static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
779 struct sil24_sge *sge)
781 struct scatterlist *sg;
782 struct sil24_sge *last_sge = NULL;
783 unsigned int si;
785 for_each_sg(qc->sg, sg, qc->n_elem, si) {
786 sge->addr = cpu_to_le64(sg_dma_address(sg));
787 sge->cnt = cpu_to_le32(sg_dma_len(sg));
788 sge->flags = 0;
790 last_sge = sge;
791 sge++;
794 last_sge->flags = cpu_to_le32(SGE_TRM);
797 static int sil24_qc_defer(struct ata_queued_cmd *qc)
799 struct ata_link *link = qc->dev->link;
800 struct ata_port *ap = link->ap;
801 u8 prot = qc->tf.protocol;
804 * There is a bug in the chip:
805 * Port LRAM Causes the PRB/SGT Data to be Corrupted
806 * If the host issues a read request for LRAM and SActive registers
807 * while active commands are available in the port, PRB/SGT data in
808 * the LRAM can become corrupted. This issue applies only when
809 * reading from, but not writing to, the LRAM.
811 * Therefore, reading LRAM when there is no particular error [and
812 * other commands may be outstanding] is prohibited.
814 * To avoid this bug there are two situations where a command must run
815 * exclusive of any other commands on the port:
817 * - ATAPI commands which check the sense data
818 * - Passthrough ATA commands which always have ATA_QCFLAG_RESULT_TF
819 * set.
822 int is_excl = (ata_is_atapi(prot) ||
823 (qc->flags & ATA_QCFLAG_RESULT_TF));
825 if (unlikely(ap->excl_link)) {
826 if (link == ap->excl_link) {
827 if (ap->nr_active_links)
828 return ATA_DEFER_PORT;
829 qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
830 } else
831 return ATA_DEFER_PORT;
832 } else if (unlikely(is_excl)) {
833 ap->excl_link = link;
834 if (ap->nr_active_links)
835 return ATA_DEFER_PORT;
836 qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
839 return ata_std_qc_defer(qc);
842 static void sil24_qc_prep(struct ata_queued_cmd *qc)
844 struct ata_port *ap = qc->ap;
845 struct sil24_port_priv *pp = ap->private_data;
846 union sil24_cmd_block *cb;
847 struct sil24_prb *prb;
848 struct sil24_sge *sge;
849 u16 ctrl = 0;
851 cb = &pp->cmd_block[sil24_tag(qc->tag)];
853 if (!ata_is_atapi(qc->tf.protocol)) {
854 prb = &cb->ata.prb;
855 sge = cb->ata.sge;
856 } else {
857 prb = &cb->atapi.prb;
858 sge = cb->atapi.sge;
859 memset(cb->atapi.cdb, 0, 32);
860 memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len);
862 if (ata_is_data(qc->tf.protocol)) {
863 if (qc->tf.flags & ATA_TFLAG_WRITE)
864 ctrl = PRB_CTRL_PACKET_WRITE;
865 else
866 ctrl = PRB_CTRL_PACKET_READ;
870 prb->ctrl = cpu_to_le16(ctrl);
871 ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, prb->fis);
873 if (qc->flags & ATA_QCFLAG_DMAMAP)
874 sil24_fill_sg(qc, sge);
877 static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
879 struct ata_port *ap = qc->ap;
880 struct sil24_port_priv *pp = ap->private_data;
881 void __iomem *port = sil24_port_base(ap);
882 unsigned int tag = sil24_tag(qc->tag);
883 dma_addr_t paddr;
884 void __iomem *activate;
886 paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block);
887 activate = port + PORT_CMD_ACTIVATE + tag * 8;
889 writel((u32)paddr, activate);
890 writel((u64)paddr >> 32, activate + 4);
892 return 0;
895 static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc)
897 sil24_read_tf(qc->ap, qc->tag, &qc->result_tf);
898 return true;
901 static void sil24_pmp_attach(struct ata_port *ap)
903 u32 *gscr = ap->link.device->gscr;
905 sil24_config_pmp(ap, 1);
906 sil24_init_port(ap);
908 if (sata_pmp_gscr_vendor(gscr) == 0x11ab &&
909 sata_pmp_gscr_devid(gscr) == 0x4140) {
910 ata_port_printk(ap, KERN_INFO,
911 "disabling NCQ support due to sil24-mv4140 quirk\n");
912 ap->flags &= ~ATA_FLAG_NCQ;
916 static void sil24_pmp_detach(struct ata_port *ap)
918 sil24_init_port(ap);
919 sil24_config_pmp(ap, 0);
921 ap->flags |= ATA_FLAG_NCQ;
924 static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
925 unsigned long deadline)
927 int rc;
929 rc = sil24_init_port(link->ap);
930 if (rc) {
931 ata_link_printk(link, KERN_ERR,
932 "hardreset failed (port not ready)\n");
933 return rc;
936 return sata_std_hardreset(link, class, deadline);
939 static void sil24_freeze(struct ata_port *ap)
941 void __iomem *port = sil24_port_base(ap);
943 /* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear
944 * PORT_IRQ_ENABLE instead.
946 writel(0xffff, port + PORT_IRQ_ENABLE_CLR);
949 static void sil24_thaw(struct ata_port *ap)
951 void __iomem *port = sil24_port_base(ap);
952 u32 tmp;
954 /* clear IRQ */
955 tmp = readl(port + PORT_IRQ_STAT);
956 writel(tmp, port + PORT_IRQ_STAT);
958 /* turn IRQ back on */
959 writel(DEF_PORT_IRQ, port + PORT_IRQ_ENABLE_SET);
962 static void sil24_error_intr(struct ata_port *ap)
964 void __iomem *port = sil24_port_base(ap);
965 struct sil24_port_priv *pp = ap->private_data;
966 struct ata_queued_cmd *qc = NULL;
967 struct ata_link *link;
968 struct ata_eh_info *ehi;
969 int abort = 0, freeze = 0;
970 u32 irq_stat;
972 /* on error, we need to clear IRQ explicitly */
973 irq_stat = readl(port + PORT_IRQ_STAT);
974 writel(irq_stat, port + PORT_IRQ_STAT);
976 /* first, analyze and record host port events */
977 link = &ap->link;
978 ehi = &link->eh_info;
979 ata_ehi_clear_desc(ehi);
981 ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat);
983 if (irq_stat & PORT_IRQ_SDB_NOTIFY) {
984 ata_ehi_push_desc(ehi, "SDB notify");
985 sata_async_notification(ap);
988 if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) {
989 ata_ehi_hotplugged(ehi);
990 ata_ehi_push_desc(ehi, "%s",
991 irq_stat & PORT_IRQ_PHYRDY_CHG ?
992 "PHY RDY changed" : "device exchanged");
993 freeze = 1;
996 if (irq_stat & PORT_IRQ_UNK_FIS) {
997 ehi->err_mask |= AC_ERR_HSM;
998 ehi->action |= ATA_EH_RESET;
999 ata_ehi_push_desc(ehi, "unknown FIS");
1000 freeze = 1;
1003 /* deal with command error */
1004 if (irq_stat & PORT_IRQ_ERROR) {
1005 struct sil24_cerr_info *ci = NULL;
1006 unsigned int err_mask = 0, action = 0;
1007 u32 context, cerr;
1008 int pmp;
1010 abort = 1;
1012 /* DMA Context Switch Failure in Port Multiplier Mode
1013 * errata. If we have active commands to 3 or more
1014 * devices, any error condition on active devices can
1015 * corrupt DMA context switching.
1017 if (ap->nr_active_links >= 3) {
1018 ehi->err_mask |= AC_ERR_OTHER;
1019 ehi->action |= ATA_EH_RESET;
1020 ata_ehi_push_desc(ehi, "PMP DMA CS errata");
1021 pp->do_port_rst = 1;
1022 freeze = 1;
1025 /* find out the offending link and qc */
1026 if (sata_pmp_attached(ap)) {
1027 context = readl(port + PORT_CONTEXT);
1028 pmp = (context >> 5) & 0xf;
1030 if (pmp < ap->nr_pmp_links) {
1031 link = &ap->pmp_link[pmp];
1032 ehi = &link->eh_info;
1033 qc = ata_qc_from_tag(ap, link->active_tag);
1035 ata_ehi_clear_desc(ehi);
1036 ata_ehi_push_desc(ehi, "irq_stat 0x%08x",
1037 irq_stat);
1038 } else {
1039 err_mask |= AC_ERR_HSM;
1040 action |= ATA_EH_RESET;
1041 freeze = 1;
1043 } else
1044 qc = ata_qc_from_tag(ap, link->active_tag);
1046 /* analyze CMD_ERR */
1047 cerr = readl(port + PORT_CMD_ERR);
1048 if (cerr < ARRAY_SIZE(sil24_cerr_db))
1049 ci = &sil24_cerr_db[cerr];
1051 if (ci && ci->desc) {
1052 err_mask |= ci->err_mask;
1053 action |= ci->action;
1054 if (action & ATA_EH_RESET)
1055 freeze = 1;
1056 ata_ehi_push_desc(ehi, "%s", ci->desc);
1057 } else {
1058 err_mask |= AC_ERR_OTHER;
1059 action |= ATA_EH_RESET;
1060 freeze = 1;
1061 ata_ehi_push_desc(ehi, "unknown command error %d",
1062 cerr);
1065 /* record error info */
1066 if (qc)
1067 qc->err_mask |= err_mask;
1068 else
1069 ehi->err_mask |= err_mask;
1071 ehi->action |= action;
1073 /* if PMP, resume */
1074 if (sata_pmp_attached(ap))
1075 writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_STAT);
1078 /* freeze or abort */
1079 if (freeze)
1080 ata_port_freeze(ap);
1081 else if (abort) {
1082 if (qc)
1083 ata_link_abort(qc->dev->link);
1084 else
1085 ata_port_abort(ap);
1089 static inline void sil24_host_intr(struct ata_port *ap)
1091 void __iomem *port = sil24_port_base(ap);
1092 u32 slot_stat, qc_active;
1093 int rc;
1095 /* If PCIX_IRQ_WOC, there's an inherent race window between
1096 * clearing IRQ pending status and reading PORT_SLOT_STAT
1097 * which may cause spurious interrupts afterwards. This is
1098 * unavoidable and much better than losing interrupts which
1099 * happens if IRQ pending is cleared after reading
1100 * PORT_SLOT_STAT.
1102 if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
1103 writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
1105 slot_stat = readl(port + PORT_SLOT_STAT);
1107 if (unlikely(slot_stat & HOST_SSTAT_ATTN)) {
1108 sil24_error_intr(ap);
1109 return;
1112 qc_active = slot_stat & ~HOST_SSTAT_ATTN;
1113 rc = ata_qc_complete_multiple(ap, qc_active);
1114 if (rc > 0)
1115 return;
1116 if (rc < 0) {
1117 struct ata_eh_info *ehi = &ap->link.eh_info;
1118 ehi->err_mask |= AC_ERR_HSM;
1119 ehi->action |= ATA_EH_RESET;
1120 ata_port_freeze(ap);
1121 return;
1124 /* spurious interrupts are expected if PCIX_IRQ_WOC */
1125 if (!(ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) && ata_ratelimit())
1126 ata_port_printk(ap, KERN_INFO, "spurious interrupt "
1127 "(slot_stat 0x%x active_tag %d sactive 0x%x)\n",
1128 slot_stat, ap->link.active_tag, ap->link.sactive);
1131 static irqreturn_t sil24_interrupt(int irq, void *dev_instance)
1133 struct ata_host *host = dev_instance;
1134 void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1135 unsigned handled = 0;
1136 u32 status;
1137 int i;
1139 status = readl(host_base + HOST_IRQ_STAT);
1141 if (status == 0xffffffff) {
1142 printk(KERN_ERR DRV_NAME ": IRQ status == 0xffffffff, "
1143 "PCI fault or device removal?\n");
1144 goto out;
1147 if (!(status & IRQ_STAT_4PORTS))
1148 goto out;
1150 spin_lock(&host->lock);
1152 for (i = 0; i < host->n_ports; i++)
1153 if (status & (1 << i)) {
1154 struct ata_port *ap = host->ports[i];
1155 if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
1156 sil24_host_intr(ap);
1157 handled++;
1158 } else
1159 printk(KERN_ERR DRV_NAME
1160 ": interrupt from disabled port %d\n", i);
1163 spin_unlock(&host->lock);
1164 out:
1165 return IRQ_RETVAL(handled);
1168 static void sil24_error_handler(struct ata_port *ap)
1170 struct sil24_port_priv *pp = ap->private_data;
1172 if (sil24_init_port(ap))
1173 ata_eh_freeze_port(ap);
1175 sata_pmp_error_handler(ap);
1177 pp->do_port_rst = 0;
1180 static void sil24_post_internal_cmd(struct ata_queued_cmd *qc)
1182 struct ata_port *ap = qc->ap;
1184 /* make DMA engine forget about the failed command */
1185 if ((qc->flags & ATA_QCFLAG_FAILED) && sil24_init_port(ap))
1186 ata_eh_freeze_port(ap);
1189 static int sil24_port_start(struct ata_port *ap)
1191 struct device *dev = ap->host->dev;
1192 struct sil24_port_priv *pp;
1193 union sil24_cmd_block *cb;
1194 size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS;
1195 dma_addr_t cb_dma;
1197 pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
1198 if (!pp)
1199 return -ENOMEM;
1201 cb = dmam_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL);
1202 if (!cb)
1203 return -ENOMEM;
1204 memset(cb, 0, cb_size);
1206 pp->cmd_block = cb;
1207 pp->cmd_block_dma = cb_dma;
1209 ap->private_data = pp;
1211 ata_port_pbar_desc(ap, SIL24_HOST_BAR, -1, "host");
1212 ata_port_pbar_desc(ap, SIL24_PORT_BAR, sil24_port_offset(ap), "port");
1214 return 0;
1217 static void sil24_init_controller(struct ata_host *host)
1219 void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1220 u32 tmp;
1221 int i;
1223 /* GPIO off */
1224 writel(0, host_base + HOST_FLASH_CMD);
1226 /* clear global reset & mask interrupts during initialization */
1227 writel(0, host_base + HOST_CTRL);
1229 /* init ports */
1230 for (i = 0; i < host->n_ports; i++) {
1231 struct ata_port *ap = host->ports[i];
1232 void __iomem *port = sil24_port_base(ap);
1235 /* Initial PHY setting */
1236 writel(0x20c, port + PORT_PHY_CFG);
1238 /* Clear port RST */
1239 tmp = readl(port + PORT_CTRL_STAT);
1240 if (tmp & PORT_CS_PORT_RST) {
1241 writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
1242 tmp = ata_wait_register(port + PORT_CTRL_STAT,
1243 PORT_CS_PORT_RST,
1244 PORT_CS_PORT_RST, 10, 100);
1245 if (tmp & PORT_CS_PORT_RST)
1246 dev_printk(KERN_ERR, host->dev,
1247 "failed to clear port RST\n");
1250 /* configure port */
1251 sil24_config_port(ap);
1254 /* Turn on interrupts */
1255 writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
1258 static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
1260 extern int __MARKER__sil24_cmd_block_is_sized_wrongly;
1261 static int printed_version;
1262 struct ata_port_info pi = sil24_port_info[ent->driver_data];
1263 const struct ata_port_info *ppi[] = { &pi, NULL };
1264 void __iomem * const *iomap;
1265 struct ata_host *host;
1266 int rc;
1267 u32 tmp;
1269 /* cause link error if sil24_cmd_block is sized wrongly */
1270 if (sizeof(union sil24_cmd_block) != PAGE_SIZE)
1271 __MARKER__sil24_cmd_block_is_sized_wrongly = 1;
1273 if (!printed_version++)
1274 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
1276 /* acquire resources */
1277 rc = pcim_enable_device(pdev);
1278 if (rc)
1279 return rc;
1281 rc = pcim_iomap_regions(pdev,
1282 (1 << SIL24_HOST_BAR) | (1 << SIL24_PORT_BAR),
1283 DRV_NAME);
1284 if (rc)
1285 return rc;
1286 iomap = pcim_iomap_table(pdev);
1288 /* apply workaround for completion IRQ loss on PCI-X errata */
1289 if (pi.flags & SIL24_FLAG_PCIX_IRQ_WOC) {
1290 tmp = readl(iomap[SIL24_HOST_BAR] + HOST_CTRL);
1291 if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL))
1292 dev_printk(KERN_INFO, &pdev->dev,
1293 "Applying completion IRQ loss on PCI-X "
1294 "errata fix\n");
1295 else
1296 pi.flags &= ~SIL24_FLAG_PCIX_IRQ_WOC;
1299 /* allocate and fill host */
1300 host = ata_host_alloc_pinfo(&pdev->dev, ppi,
1301 SIL24_FLAG2NPORTS(ppi[0]->flags));
1302 if (!host)
1303 return -ENOMEM;
1304 host->iomap = iomap;
1306 /* configure and activate the device */
1307 if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
1308 rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
1309 if (rc) {
1310 rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
1311 if (rc) {
1312 dev_printk(KERN_ERR, &pdev->dev,
1313 "64-bit DMA enable failed\n");
1314 return rc;
1317 } else {
1318 rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
1319 if (rc) {
1320 dev_printk(KERN_ERR, &pdev->dev,
1321 "32-bit DMA enable failed\n");
1322 return rc;
1324 rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
1325 if (rc) {
1326 dev_printk(KERN_ERR, &pdev->dev,
1327 "32-bit consistent DMA enable failed\n");
1328 return rc;
1332 sil24_init_controller(host);
1334 pci_set_master(pdev);
1335 return ata_host_activate(host, pdev->irq, sil24_interrupt, IRQF_SHARED,
1336 &sil24_sht);
1339 #ifdef CONFIG_PM
1340 static int sil24_pci_device_resume(struct pci_dev *pdev)
1342 struct ata_host *host = dev_get_drvdata(&pdev->dev);
1343 void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1344 int rc;
1346 rc = ata_pci_device_do_resume(pdev);
1347 if (rc)
1348 return rc;
1350 if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND)
1351 writel(HOST_CTRL_GLOBAL_RST, host_base + HOST_CTRL);
1353 sil24_init_controller(host);
1355 ata_host_resume(host);
1357 return 0;
1360 static int sil24_port_resume(struct ata_port *ap)
1362 sil24_config_pmp(ap, ap->nr_pmp_links);
1363 return 0;
1365 #endif
1367 static int __init sil24_init(void)
1369 return pci_register_driver(&sil24_pci_driver);
1372 static void __exit sil24_exit(void)
1374 pci_unregister_driver(&sil24_pci_driver);
1377 MODULE_AUTHOR("Tejun Heo");
1378 MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver");
1379 MODULE_LICENSE("GPL");
1380 MODULE_DEVICE_TABLE(pci, sil24_pci_tbl);
1382 module_init(sil24_init);
1383 module_exit(sil24_exit);