?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
ALSA: hda - Fix missing stream for second ADC on Realtek ALC260 HDA codec
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / serial / amba-pl011.c
blob743ebf5f16da8942bc6c7d23508cc69cfd9eb229
1 /*
2 * linux/drivers/char/amba.c
3 *
4 * Driver for AMBA serial ports
5 *
6 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
7 *
8 * Copyright 1999 ARM Limited
9 * Copyright (C) 2000 Deep Blue Solutions Ltd.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 *
25 * This is a generic driver for ARM AMBA-type serial ports. They
26 * have a lot of 16550-like features, but are not register compatible.
27 * Note that although they do have CTS, DCD and DSR inputs, they do
28 * not have an RI input, nor do they have DTR or RTS outputs. If
29 * required, these have to be supplied via some other means (eg, GPIO)
30 * and hooked into this driver.
31 */
32
33 #if defined(CONFIG_SERIAL_AMBA_PL011_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
34 #define SUPPORT_SYSRQ
35 #endif
36
37 #include <linux/module.h>
38 #include <linux/ioport.h>
39 #include <linux/init.h>
40 #include <linux/console.h>
41 #include <linux/sysrq.h>
42 #include <linux/device.h>
43 #include <linux/tty.h>
44 #include <linux/tty_flip.h>
45 #include <linux/serial_core.h>
46 #include <linux/serial.h>
47 #include <linux/amba/bus.h>
48 #include <linux/amba/serial.h>
49 #include <linux/clk.h>
50 #include <linux/slab.h>
51
52 #include <asm/io.h>
53 #include <asm/sizes.h>
54
55 #define UART_NR 14
56
57 #define SERIAL_AMBA_MAJOR 204
58 #define SERIAL_AMBA_MINOR 64
59 #define SERIAL_AMBA_NR UART_NR
60
61 #define AMBA_ISR_PASS_LIMIT 256
62
63 #define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE)
64 #define UART_DUMMY_DR_RX (1 << 16)
65
66 /*
67 * We wrap our port structure around the generic uart_port.
68 */
69 struct uart_amba_port {
70 struct uart_port port;
71 struct clk *clk;
72 unsigned int im; /* interrupt mask */
73 unsigned int old_status;
74 unsigned int ifls; /* vendor-specific */
75 bool autorts;
76 };
77
78 /* There is by now at least one vendor with differing details, so handle it */
79 struct vendor_data {
80 unsigned int ifls;
81 unsigned int fifosize;
82 };
83
84 static struct vendor_data vendor_arm = {
85 .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
86 .fifosize = 16,
87 };
88
89 static struct vendor_data vendor_st = {
90 .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
91 .fifosize = 64,
92 };
93
94 static void pl011_stop_tx(struct uart_port *port)
95 {
96 struct uart_amba_port *uap = (struct uart_amba_port *)port;
97
98 uap->im &= ~UART011_TXIM;
99 writew(uap->im, uap->port.membase + UART011_IMSC);
100 }
101
102 static void pl011_start_tx(struct uart_port *port)
103 {
104 struct uart_amba_port *uap = (struct uart_amba_port *)port;
105
106 uap->im |= UART011_TXIM;
107 writew(uap->im, uap->port.membase + UART011_IMSC);
108 }
109
110 static void pl011_stop_rx(struct uart_port *port)
111 {
112 struct uart_amba_port *uap = (struct uart_amba_port *)port;
113
114 uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM|
115 UART011_PEIM|UART011_BEIM|UART011_OEIM);
116 writew(uap->im, uap->port.membase + UART011_IMSC);
117 }
118
119 static void pl011_enable_ms(struct uart_port *port)
120 {
121 struct uart_amba_port *uap = (struct uart_amba_port *)port;
122
123 uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM;
124 writew(uap->im, uap->port.membase + UART011_IMSC);
125 }
126
127 static void pl011_rx_chars(struct uart_amba_port *uap)
128 {
129 struct tty_struct *tty = uap->port.state->port.tty;
130 unsigned int status, ch, flag, max_count = 256;
131
132 status = readw(uap->port.membase + UART01x_FR);
133 while ((status & UART01x_FR_RXFE) == 0 && max_count--) {
134 ch = readw(uap->port.membase + UART01x_DR) | UART_DUMMY_DR_RX;
135 flag = TTY_NORMAL;
136 uap->port.icount.rx++;
137
138 /*
139 * Note that the error handling code is
140 * out of the main execution path
141 */
142 if (unlikely(ch & UART_DR_ERROR)) {
143 if (ch & UART011_DR_BE) {
144 ch &= ~(UART011_DR_FE | UART011_DR_PE);
145 uap->port.icount.brk++;
146 if (uart_handle_break(&uap->port))
147 goto ignore_char;
148 } else if (ch & UART011_DR_PE)
149 uap->port.icount.parity++;
150 else if (ch & UART011_DR_FE)
151 uap->port.icount.frame++;
152 if (ch & UART011_DR_OE)
153 uap->port.icount.overrun++;
154
155 ch &= uap->port.read_status_mask;
156
157 if (ch & UART011_DR_BE)
158 flag = TTY_BREAK;
159 else if (ch & UART011_DR_PE)
160 flag = TTY_PARITY;
161 else if (ch & UART011_DR_FE)
162 flag = TTY_FRAME;
163 }
164
165 if (uart_handle_sysrq_char(&uap->port, ch & 255))
166 goto ignore_char;
167
168 uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag);
169
170 ignore_char:
171 status = readw(uap->port.membase + UART01x_FR);
172 }
173 spin_unlock(&uap->port.lock);
174 tty_flip_buffer_push(tty);
175 spin_lock(&uap->port.lock);
176 }
177
178 static void pl011_tx_chars(struct uart_amba_port *uap)
179 {
180 struct circ_buf *xmit = &uap->port.state->xmit;
181 int count;
182
183 if (uap->port.x_char) {
184 writew(uap->port.x_char, uap->port.membase + UART01x_DR);
185 uap->port.icount.tx++;
186 uap->port.x_char = 0;
187 return;
188 }
189 if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) {
190 pl011_stop_tx(&uap->port);
191 return;
192 }
193
194 count = uap->port.fifosize >> 1;
195 do {
196 writew(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
197 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
198 uap->port.icount.tx++;
199 if (uart_circ_empty(xmit))
200 break;
201 } while (--count > 0);
202
203 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
204 uart_write_wakeup(&uap->port);
205
206 if (uart_circ_empty(xmit))
207 pl011_stop_tx(&uap->port);
208 }
209
210 static void pl011_modem_status(struct uart_amba_port *uap)
211 {
212 unsigned int status, delta;
213
214 status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
215
216 delta = status ^ uap->old_status;
217 uap->old_status = status;
218
219 if (!delta)
220 return;
221
222 if (delta & UART01x_FR_DCD)
223 uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD);
224
225 if (delta & UART01x_FR_DSR)
226 uap->port.icount.dsr++;
227
228 if (delta & UART01x_FR_CTS)
229 uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
230
231 wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
232 }
233
234 static irqreturn_t pl011_int(int irq, void *dev_id)
235 {
236 struct uart_amba_port *uap = dev_id;
237 unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
238 int handled = 0;
239
240 spin_lock(&uap->port.lock);
241
242 status = readw(uap->port.membase + UART011_MIS);
243 if (status) {
244 do {
245 writew(status & ~(UART011_TXIS|UART011_RTIS|
246 UART011_RXIS),
247 uap->port.membase + UART011_ICR);
248
249 if (status & (UART011_RTIS|UART011_RXIS))
250 pl011_rx_chars(uap);
251 if (status & (UART011_DSRMIS|UART011_DCDMIS|
252 UART011_CTSMIS|UART011_RIMIS))
253 pl011_modem_status(uap);
254 if (status & UART011_TXIS)
255 pl011_tx_chars(uap);
256
257 if (pass_counter-- == 0)
258 break;
259
260 status = readw(uap->port.membase + UART011_MIS);
261 } while (status != 0);
262 handled = 1;
263 }
264
265 spin_unlock(&uap->port.lock);
266
267 return IRQ_RETVAL(handled);
268 }
269
270 static unsigned int pl01x_tx_empty(struct uart_port *port)
271 {
272 struct uart_amba_port *uap = (struct uart_amba_port *)port;
273 unsigned int status = readw(uap->port.membase + UART01x_FR);
274 return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
275 }
276
277 static unsigned int pl01x_get_mctrl(struct uart_port *port)
278 {
279 struct uart_amba_port *uap = (struct uart_amba_port *)port;
280 unsigned int result = 0;
281 unsigned int status = readw(uap->port.membase + UART01x_FR);
282
283 #define TIOCMBIT(uartbit, tiocmbit) \
284 if (status & uartbit) \
285 result |= tiocmbit
286
287 TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR);
288 TIOCMBIT(UART01x_FR_DSR, TIOCM_DSR);
289 TIOCMBIT(UART01x_FR_CTS, TIOCM_CTS);
290 TIOCMBIT(UART011_FR_RI, TIOCM_RNG);
291 #undef TIOCMBIT
292 return result;
293 }
294
295 static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
296 {
297 struct uart_amba_port *uap = (struct uart_amba_port *)port;
298 unsigned int cr;
299
300 cr = readw(uap->port.membase + UART011_CR);
301
302 #define TIOCMBIT(tiocmbit, uartbit) \
303 if (mctrl & tiocmbit) \
304 cr |= uartbit; \
305 else \
306 cr &= ~uartbit
307
308 TIOCMBIT(TIOCM_RTS, UART011_CR_RTS);
309 TIOCMBIT(TIOCM_DTR, UART011_CR_DTR);
310 TIOCMBIT(TIOCM_OUT1, UART011_CR_OUT1);
311 TIOCMBIT(TIOCM_OUT2, UART011_CR_OUT2);
312 TIOCMBIT(TIOCM_LOOP, UART011_CR_LBE);
313
314 if (uap->autorts) {
315 /* We need to disable auto-RTS if we want to turn RTS off */
316 TIOCMBIT(TIOCM_RTS, UART011_CR_RTSEN);
317 }
318 #undef TIOCMBIT
319
320 writew(cr, uap->port.membase + UART011_CR);
321 }
322
323 static void pl011_break_ctl(struct uart_port *port, int break_state)
324 {
325 struct uart_amba_port *uap = (struct uart_amba_port *)port;
326 unsigned long flags;
327 unsigned int lcr_h;
328
329 spin_lock_irqsave(&uap->port.lock, flags);
330 lcr_h = readw(uap->port.membase + UART011_LCRH);
331 if (break_state == -1)
332 lcr_h |= UART01x_LCRH_BRK;
333 else
334 lcr_h &= ~UART01x_LCRH_BRK;
335 writew(lcr_h, uap->port.membase + UART011_LCRH);
336 spin_unlock_irqrestore(&uap->port.lock, flags);
337 }
338
339 #ifdef CONFIG_CONSOLE_POLL
340 static int pl010_get_poll_char(struct uart_port *port)
341 {
342 struct uart_amba_port *uap = (struct uart_amba_port *)port;
343 unsigned int status;
344
345 do {
346 status = readw(uap->port.membase + UART01x_FR);
347 } while (status & UART01x_FR_RXFE);
348
349 return readw(uap->port.membase + UART01x_DR);
350 }
351
352 static void pl010_put_poll_char(struct uart_port *port,
353 unsigned char ch)
354 {
355 struct uart_amba_port *uap = (struct uart_amba_port *)port;
356
357 while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
358 barrier();
359
360 writew(ch, uap->port.membase + UART01x_DR);
361 }
362
363 #endif /* CONFIG_CONSOLE_POLL */
364
365 static int pl011_startup(struct uart_port *port)
366 {
367 struct uart_amba_port *uap = (struct uart_amba_port *)port;
368 unsigned int cr;
369 int retval;
370
371 /*
372 * Try to enable the clock producer.
373 */
374 retval = clk_enable(uap->clk);
375 if (retval)
376 goto out;
377
378 uap->port.uartclk = clk_get_rate(uap->clk);
379
380 /*
381 * Allocate the IRQ
382 */
383 retval = request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
384 if (retval)
385 goto clk_dis;
386
387 writew(uap->ifls, uap->port.membase + UART011_IFLS);
388
389 /*
390 * Provoke TX FIFO interrupt into asserting.
391 */
392 cr = UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_LBE;
393 writew(cr, uap->port.membase + UART011_CR);
394 writew(0, uap->port.membase + UART011_FBRD);
395 writew(1, uap->port.membase + UART011_IBRD);
396 writew(0, uap->port.membase + UART011_LCRH);
397 writew(0, uap->port.membase + UART01x_DR);
398 while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
399 barrier();
400
401 cr = UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
402 writew(cr, uap->port.membase + UART011_CR);
403
404 /*
405 * initialise the old status of the modem signals
406 */
407 uap->old_status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
408
409 /*
410 * Finally, enable interrupts
411 */
412 spin_lock_irq(&uap->port.lock);
413 uap->im = UART011_RXIM | UART011_RTIM;
414 writew(uap->im, uap->port.membase + UART011_IMSC);
415 spin_unlock_irq(&uap->port.lock);
416
417 return 0;
418
419 clk_dis:
420 clk_disable(uap->clk);
421 out:
422 return retval;
423 }
424
425 static void pl011_shutdown(struct uart_port *port)
426 {
427 struct uart_amba_port *uap = (struct uart_amba_port *)port;
428 unsigned long val;
429
430 /*
431 * disable all interrupts
432 */
433 spin_lock_irq(&uap->port.lock);
434 uap->im = 0;
435 writew(uap->im, uap->port.membase + UART011_IMSC);
436 writew(0xffff, uap->port.membase + UART011_ICR);
437 spin_unlock_irq(&uap->port.lock);
438
439 /*
440 * Free the interrupt
441 */
442 free_irq(uap->port.irq, uap);
443
444 /*
445 * disable the port
446 */
447 uap->autorts = false;
448 writew(UART01x_CR_UARTEN | UART011_CR_TXE, uap->port.membase + UART011_CR);
449
450 /*
451 * disable break condition and fifos
452 */
453 val = readw(uap->port.membase + UART011_LCRH);
454 val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
455 writew(val, uap->port.membase + UART011_LCRH);
456
457 /*
458 * Shut down the clock producer
459 */
460 clk_disable(uap->clk);
461 }
462
463 static void
464 pl011_set_termios(struct uart_port *port, struct ktermios *termios,
465 struct ktermios *old)
466 {
467 struct uart_amba_port *uap = (struct uart_amba_port *)port;
468 unsigned int lcr_h, old_cr;
469 unsigned long flags;
470 unsigned int baud, quot;
471
472 /*
473 * Ask the core to calculate the divisor for us.
474 */
475 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
476 quot = port->uartclk * 4 / baud;
477
478 switch (termios->c_cflag & CSIZE) {
479 case CS5:
480 lcr_h = UART01x_LCRH_WLEN_5;
481 break;
482 case CS6:
483 lcr_h = UART01x_LCRH_WLEN_6;
484 break;
485 case CS7:
486 lcr_h = UART01x_LCRH_WLEN_7;
487 break;
488 default: // CS8
489 lcr_h = UART01x_LCRH_WLEN_8;
490 break;
491 }
492 if (termios->c_cflag & CSTOPB)
493 lcr_h |= UART01x_LCRH_STP2;
494 if (termios->c_cflag & PARENB) {
495 lcr_h |= UART01x_LCRH_PEN;
496 if (!(termios->c_cflag & PARODD))
497 lcr_h |= UART01x_LCRH_EPS;
498 }
499 if (port->fifosize > 1)
500 lcr_h |= UART01x_LCRH_FEN;
501
502 spin_lock_irqsave(&port->lock, flags);
503
504 /*
505 * Update the per-port timeout.
506 */
507 uart_update_timeout(port, termios->c_cflag, baud);
508
509 port->read_status_mask = UART011_DR_OE | 255;
510 if (termios->c_iflag & INPCK)
511 port->read_status_mask |= UART011_DR_FE | UART011_DR_PE;
512 if (termios->c_iflag & (BRKINT | PARMRK))
513 port->read_status_mask |= UART011_DR_BE;
514
515 /*
516 * Characters to ignore
517 */
518 port->ignore_status_mask = 0;
519 if (termios->c_iflag & IGNPAR)
520 port->ignore_status_mask |= UART011_DR_FE | UART011_DR_PE;
521 if (termios->c_iflag & IGNBRK) {
522 port->ignore_status_mask |= UART011_DR_BE;
523 /*
524 * If we're ignoring parity and break indicators,
525 * ignore overruns too (for real raw support).
526 */
527 if (termios->c_iflag & IGNPAR)
528 port->ignore_status_mask |= UART011_DR_OE;
529 }
530
531 /*
532 * Ignore all characters if CREAD is not set.
533 */
534 if ((termios->c_cflag & CREAD) == 0)
535 port->ignore_status_mask |= UART_DUMMY_DR_RX;
536
537 if (UART_ENABLE_MS(port, termios->c_cflag))
538 pl011_enable_ms(port);
539
540 /* first, disable everything */
541 old_cr = readw(port->membase + UART011_CR);
542 writew(0, port->membase + UART011_CR);
543
544 if (termios->c_cflag & CRTSCTS) {
545 if (old_cr & UART011_CR_RTS)
546 old_cr |= UART011_CR_RTSEN;
547
548 old_cr |= UART011_CR_CTSEN;
549 uap->autorts = true;
550 } else {
551 old_cr &= ~(UART011_CR_CTSEN | UART011_CR_RTSEN);
552 uap->autorts = false;
553 }
554
555 /* Set baud rate */
556 writew(quot & 0x3f, port->membase + UART011_FBRD);
557 writew(quot >> 6, port->membase + UART011_IBRD);
558
559 /*
560 * ----------v----------v----------v----------v-----
561 * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
562 * ----------^----------^----------^----------^-----
563 */
564 writew(lcr_h, port->membase + UART011_LCRH);
565 writew(old_cr, port->membase + UART011_CR);
566
567 spin_unlock_irqrestore(&port->lock, flags);
568 }
569
570 static const char *pl011_type(struct uart_port *port)
571 {
572 return port->type == PORT_AMBA ? "AMBA/PL011" : NULL;
573 }
574
575 /*
576 * Release the memory region(s) being used by 'port'
577 */
578 static void pl010_release_port(struct uart_port *port)
579 {
580 release_mem_region(port->mapbase, SZ_4K);
581 }
582
583 /*
584 * Request the memory region(s) being used by 'port'
585 */
586 static int pl010_request_port(struct uart_port *port)
587 {
588 return request_mem_region(port->mapbase, SZ_4K, "uart-pl011")
589 != NULL ? 0 : -EBUSY;
590 }
591
592 /*
593 * Configure/autoconfigure the port.
594 */
595 static void pl010_config_port(struct uart_port *port, int flags)
596 {
597 if (flags & UART_CONFIG_TYPE) {
598 port->type = PORT_AMBA;
599 pl010_request_port(port);
600 }
601 }
602
603 /*
604 * verify the new serial_struct (for TIOCSSERIAL).
605 */
606 static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
607 {
608 int ret = 0;
609 if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA)
610 ret = -EINVAL;
611 if (ser->irq < 0 || ser->irq >= nr_irqs)
612 ret = -EINVAL;
613 if (ser->baud_base < 9600)
614 ret = -EINVAL;
615 return ret;
616 }
617
618 static struct uart_ops amba_pl011_pops = {
619 .tx_empty = pl01x_tx_empty,
620 .set_mctrl = pl011_set_mctrl,
621 .get_mctrl = pl01x_get_mctrl,
622 .stop_tx = pl011_stop_tx,
623 .start_tx = pl011_start_tx,
624 .stop_rx = pl011_stop_rx,
625 .enable_ms = pl011_enable_ms,
626 .break_ctl = pl011_break_ctl,
627 .startup = pl011_startup,
628 .shutdown = pl011_shutdown,
629 .set_termios = pl011_set_termios,
630 .type = pl011_type,
631 .release_port = pl010_release_port,
632 .request_port = pl010_request_port,
633 .config_port = pl010_config_port,
634 .verify_port = pl010_verify_port,
635 #ifdef CONFIG_CONSOLE_POLL
636 .poll_get_char = pl010_get_poll_char,
637 .poll_put_char = pl010_put_poll_char,
638 #endif
639 };
640
641 static struct uart_amba_port *amba_ports[UART_NR];
642
643 #ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE
644
645 static void pl011_console_putchar(struct uart_port *port, int ch)
646 {
647 struct uart_amba_port *uap = (struct uart_amba_port *)port;
648
649 while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
650 barrier();
651 writew(ch, uap->port.membase + UART01x_DR);
652 }
653
654 static void
655 pl011_console_write(struct console *co, const char *s, unsigned int count)
656 {
657 struct uart_amba_port *uap = amba_ports[co->index];
658 unsigned int status, old_cr, new_cr;
659
660 clk_enable(uap->clk);
661
662 /*
663 * First save the CR then disable the interrupts
664 */
665 old_cr = readw(uap->port.membase + UART011_CR);
666 new_cr = old_cr & ~UART011_CR_CTSEN;
667 new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
668 writew(new_cr, uap->port.membase + UART011_CR);
669
670 uart_console_write(&uap->port, s, count, pl011_console_putchar);
671
672 /*
673 * Finally, wait for transmitter to become empty
674 * and restore the TCR
675 */
676 do {
677 status = readw(uap->port.membase + UART01x_FR);
678 } while (status & UART01x_FR_BUSY);
679 writew(old_cr, uap->port.membase + UART011_CR);
680
681 clk_disable(uap->clk);
682 }
683
684 static void __init
685 pl011_console_get_options(struct uart_amba_port *uap, int *baud,
686 int *parity, int *bits)
687 {
688 if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) {
689 unsigned int lcr_h, ibrd, fbrd;
690
691 lcr_h = readw(uap->port.membase + UART011_LCRH);
692
693 *parity = 'n';
694 if (lcr_h & UART01x_LCRH_PEN) {
695 if (lcr_h & UART01x_LCRH_EPS)
696 *parity = 'e';
697 else
698 *parity = 'o';
699 }
700
701 if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7)
702 *bits = 7;
703 else
704 *bits = 8;
705
706 ibrd = readw(uap->port.membase + UART011_IBRD);
707 fbrd = readw(uap->port.membase + UART011_FBRD);
708
709 *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
710 }
711 }
712
713 static int __init pl011_console_setup(struct console *co, char *options)
714 {
715 struct uart_amba_port *uap;
716 int baud = 38400;
717 int bits = 8;
718 int parity = 'n';
719 int flow = 'n';
720
721 /*
722 * Check whether an invalid uart number has been specified, and
723 * if so, search for the first available port that does have
724 * console support.
725 */
726 if (co->index >= UART_NR)
727 co->index = 0;
728 uap = amba_ports[co->index];
729 if (!uap)
730 return -ENODEV;
731
732 uap->port.uartclk = clk_get_rate(uap->clk);
733
734 if (options)
735 uart_parse_options(options, &baud, &parity, &bits, &flow);
736 else
737 pl011_console_get_options(uap, &baud, &parity, &bits);
738
739 return uart_set_options(&uap->port, co, baud, parity, bits, flow);
740 }
741
742 static struct uart_driver amba_reg;
743 static struct console amba_console = {
744 .name = "ttyAMA",
745 .write = pl011_console_write,
746 .device = uart_console_device,
747 .setup = pl011_console_setup,
748 .flags = CON_PRINTBUFFER,
749 .index = -1,
750 .data = &amba_reg,
751 };
752
753 #define AMBA_CONSOLE (&amba_console)
754 #else
755 #define AMBA_CONSOLE NULL
756 #endif
757
758 static struct uart_driver amba_reg = {
759 .owner = THIS_MODULE,
760 .driver_name = "ttyAMA",
761 .dev_name = "ttyAMA",
762 .major = SERIAL_AMBA_MAJOR,
763 .minor = SERIAL_AMBA_MINOR,
764 .nr = UART_NR,
765 .cons = AMBA_CONSOLE,
766 };
767
768 static int pl011_probe(struct amba_device *dev, struct amba_id *id)
769 {
770 struct uart_amba_port *uap;
771 struct vendor_data *vendor = id->data;
772 void __iomem *base;
773 int i, ret;
774
775 for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
776 if (amba_ports[i] == NULL)
777 break;
778
779 if (i == ARRAY_SIZE(amba_ports)) {
780 ret = -EBUSY;
781 goto out;
782 }
783
784 uap = kzalloc(sizeof(struct uart_amba_port), GFP_KERNEL);
785 if (uap == NULL) {
786 ret = -ENOMEM;
787 goto out;
788 }
789
790 base = ioremap(dev->res.start, resource_size(&dev->res));
791 if (!base) {
792 ret = -ENOMEM;
793 goto free;
794 }
795
796 uap->clk = clk_get(&dev->dev, NULL);
797 if (IS_ERR(uap->clk)) {
798 ret = PTR_ERR(uap->clk);
799 goto unmap;
800 }
801
802 uap->ifls = vendor->ifls;
803 uap->port.dev = &dev->dev;
804 uap->port.mapbase = dev->res.start;
805 uap->port.membase = base;
806 uap->port.iotype = UPIO_MEM;
807 uap->port.irq = dev->irq[0];
808 uap->port.fifosize = vendor->fifosize;
809 uap->port.ops = &amba_pl011_pops;
810 uap->port.flags = UPF_BOOT_AUTOCONF;
811 uap->port.line = i;
812
813 amba_ports[i] = uap;
814
815 amba_set_drvdata(dev, uap);
816 ret = uart_add_one_port(&amba_reg, &uap->port);
817 if (ret) {
818 amba_set_drvdata(dev, NULL);
819 amba_ports[i] = NULL;
820 clk_put(uap->clk);
821 unmap:
822 iounmap(base);
823 free:
824 kfree(uap);
825 }
826 out:
827 return ret;
828 }
829
830 static int pl011_remove(struct amba_device *dev)
831 {
832 struct uart_amba_port *uap = amba_get_drvdata(dev);
833 int i;
834
835 amba_set_drvdata(dev, NULL);
836
837 uart_remove_one_port(&amba_reg, &uap->port);
838
839 for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
840 if (amba_ports[i] == uap)
841 amba_ports[i] = NULL;
842
843 iounmap(uap->port.membase);
844 clk_put(uap->clk);
845 kfree(uap);
846 return 0;
847 }
848
849 #ifdef CONFIG_PM
850 static int pl011_suspend(struct amba_device *dev, pm_message_t state)
851 {
852 struct uart_amba_port *uap = amba_get_drvdata(dev);
853
854 if (!uap)
855 return -EINVAL;
856
857 return uart_suspend_port(&amba_reg, &uap->port);
858 }
859
860 static int pl011_resume(struct amba_device *dev)
861 {
862 struct uart_amba_port *uap = amba_get_drvdata(dev);
863
864 if (!uap)
865 return -EINVAL;
866
867 return uart_resume_port(&amba_reg, &uap->port);
868 }
869 #endif
870
871 static struct amba_id pl011_ids[] __initdata = {
872 {
873 .id = 0x00041011,
874 .mask = 0x000fffff,
875 .data = &vendor_arm,
876 },
877 {
878 .id = 0x00380802,
879 .mask = 0x00ffffff,
880 .data = &vendor_st,
881 },
882 { 0, 0 },
883 };
884
885 static struct amba_driver pl011_driver = {
886 .drv = {
887 .name = "uart-pl011",
888 },
889 .id_table = pl011_ids,
890 .probe = pl011_probe,
891 .remove = pl011_remove,
892 #ifdef CONFIG_PM
893 .suspend = pl011_suspend,
894 .resume = pl011_resume,
895 #endif
896 };
897
898 static int __init pl011_init(void)
899 {
900 int ret;
901 printk(KERN_INFO "Serial: AMBA PL011 UART driver\n");
902
903 ret = uart_register_driver(&amba_reg);
904 if (ret == 0) {
905 ret = amba_driver_register(&pl011_driver);
906 if (ret)
907 uart_unregister_driver(&amba_reg);
908 }
909 return ret;
910 }
911
912 static void __exit pl011_exit(void)
913 {
914 amba_driver_unregister(&pl011_driver);
915 uart_unregister_driver(&amba_reg);
916 }
917
918 /*
919 * While this can be a module, if builtin it's most likely the console
920 * So let's leave module_exit but move module_init to an earlier place
921 */
922 arch_initcall(pl011_init);
923 module_exit(pl011_exit);
924
925 MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd");
926 MODULE_DESCRIPTION("ARM AMBA serial port driver");
927 MODULE_LICENSE("GPL");
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree