2 # Hardware monitoring chip drivers configuration
6 tristate "Hardware Monitoring support"
10 Hardware monitoring devices let you monitor the hardware health
11 of a system. Most modern motherboards include such a device. It
12 can include temperature sensors, voltage sensors, fan speed
13 sensors and various additional features such as the ability to
14 control the speed of the fans. If you want this support you
15 should say Y here and also to the specific driver(s) for your
16 sensors chip(s) below.
18 To find out which specific driver(s) you need, use the
19 sensors-detect script from the lm_sensors package. Read
20 <file:Documentation/hwmon/userspace-tools> for details.
22 This support can also be built as a module. If so, the module
31 config HWMON_DEBUG_CHIP
32 bool "Hardware Monitoring Chip debugging messages"
35 Say Y here if you want the I2C chip drivers to produce a bunch of
36 debug messages to the system log. Select this if you are having
37 a problem with I2C support and want to see more of what is going
40 comment "Native drivers"
42 config SENSORS_ABITUGURU
43 tristate "Abit uGuru (rev 1 & 2)"
44 depends on X86 && EXPERIMENTAL
46 If you say yes here you get support for the sensor part of the first
47 and second revision of the Abit uGuru chip. The voltage and frequency
48 control parts of the Abit uGuru are not supported. The Abit uGuru
49 chip can be found on Abit uGuru featuring motherboards (most modern
50 Abit motherboards from before end 2005). For more info and a list
51 of which motherboards have which revision see
52 Documentation/hwmon/abituguru
54 This driver can also be built as a module. If so, the module
55 will be called abituguru.
57 config SENSORS_ABITUGURU3
58 tristate "Abit uGuru (rev 3)"
59 depends on X86 && EXPERIMENTAL
61 If you say yes here you get support for the sensor part of the
62 third revision of the Abit uGuru chip. Only reading the sensors
63 and their settings is supported. The third revision of the Abit
64 uGuru chip can be found on recent Abit motherboards (since end
65 2005). For more info and a list of which motherboards have which
66 revision see Documentation/hwmon/abituguru3
68 This driver can also be built as a module. If so, the module
69 will be called abituguru3.
72 tristate "Analog Devices AD7414"
73 depends on I2C && EXPERIMENTAL
75 If you say yes here you get support for the Analog Devices
76 AD7414 temperature monitoring chip.
78 This driver can also be built as a module. If so, the module
79 will be called ad7414.
82 tristate "Analog Devices AD7416, AD7417 and AD7418"
83 depends on I2C && EXPERIMENTAL
85 If you say yes here you get support for the Analog Devices
86 AD7416, AD7417 and AD7418 temperature monitoring chips.
88 This driver can also be built as a module. If so, the module
89 will be called ad7418.
92 tristate "National Semiconductor ADCxxxSxxx"
93 depends on SPI_MASTER && EXPERIMENTAL
95 If you say yes here you get support for the National Semiconductor
96 ADC<bb><c>S<sss> chip family, where
97 * bb is the resolution in number of bits (8, 10, 12)
98 * c is the number of channels (1, 2, 4, 8)
99 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
100 kSPS and 101 for 1 MSPS)
102 Examples : ADC081S101, ADC124S501, ...
104 This driver can also be built as a module. If so, the module
105 will be called adcxx.
107 config SENSORS_ADM1021
108 tristate "Analog Devices ADM1021 and compatibles"
111 If you say yes here you get support for Analog Devices ADM1021
112 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
113 Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
114 and the XEON processor built-in sensor.
116 This driver can also be built as a module. If so, the module
117 will be called adm1021.
119 config SENSORS_ADM1025
120 tristate "Analog Devices ADM1025 and compatibles"
124 If you say yes here you get support for Analog Devices ADM1025
125 and Philips NE1619 sensor chips.
127 This driver can also be built as a module. If so, the module
128 will be called adm1025.
130 config SENSORS_ADM1026
131 tristate "Analog Devices ADM1026 and compatibles"
135 If you say yes here you get support for Analog Devices ADM1026
138 This driver can also be built as a module. If so, the module
139 will be called adm1026.
141 config SENSORS_ADM1029
142 tristate "Analog Devices ADM1029"
145 If you say yes here you get support for Analog Devices ADM1029
147 Very rare chip, please let us know you use it.
149 This driver can also be built as a module. If so, the module
150 will be called adm1029.
152 config SENSORS_ADM1031
153 tristate "Analog Devices ADM1031 and compatibles"
156 If you say yes here you get support for Analog Devices ADM1031
157 and ADM1030 sensor chips.
159 This driver can also be built as a module. If so, the module
160 will be called adm1031.
162 config SENSORS_ADM9240
163 tristate "Analog Devices ADM9240 and compatibles"
167 If you say yes here you get support for Analog Devices ADM9240,
168 Dallas DS1780, National Semiconductor LM81 sensor chips.
170 This driver can also be built as a module. If so, the module
171 will be called adm9240.
173 config SENSORS_ADT7411
174 tristate "Analog Devices ADT7411"
175 depends on I2C && EXPERIMENTAL
177 If you say yes here you get support for the Analog Devices
178 ADT7411 voltage and temperature monitoring chip.
180 This driver can also be built as a module. If so, the module
181 will be called adt7411.
183 config SENSORS_ADT7462
184 tristate "Analog Devices ADT7462"
185 depends on I2C && EXPERIMENTAL
187 If you say yes here you get support for the Analog Devices
188 ADT7462 temperature monitoring chips.
190 This driver can also be built as a module. If so, the module
191 will be called adt7462.
193 config SENSORS_ADT7470
194 tristate "Analog Devices ADT7470"
195 depends on I2C && EXPERIMENTAL
197 If you say yes here you get support for the Analog Devices
198 ADT7470 temperature monitoring chips.
200 This driver can also be built as a module. If so, the module
201 will be called adt7470.
203 config SENSORS_ADT7475
204 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
208 If you say yes here you get support for the Analog Devices
209 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
212 This driver can also be build as a module. If so, the module
213 will be called adt7475.
215 config SENSORS_ASC7621
216 tristate "Andigilog aSC7621"
217 depends on HWMON && I2C
219 If you say yes here you get support for the aSC7621
220 family of SMBus sensors chip found on most Intel X38, X48, X58,
221 945, 965 and 975 desktop boards. Currently supported chips:
225 This driver can also be built as a module. If so, the module
226 will be called asc7621.
228 config SENSORS_K8TEMP
229 tristate "AMD Athlon64/FX or Opteron temperature sensor"
230 depends on X86 && PCI && EXPERIMENTAL
232 If you say yes here you get support for the temperature
233 sensor(s) inside your CPU. Supported is whole AMD K8
234 microarchitecture. Please note that you will need at least
235 lm-sensors 2.10.1 for proper userspace support.
237 This driver can also be built as a module. If so, the module
238 will be called k8temp.
240 config SENSORS_K10TEMP
241 tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor"
242 depends on X86 && PCI
244 If you say yes here you get support for the temperature
245 sensor(s) inside your CPU. Supported are later revisions of
246 the AMD Family 10h and all revisions of the AMD Family 11h
249 This driver can also be built as a module. If so, the module
250 will be called k10temp.
252 config SENSORS_ASB100
253 tristate "Asus ASB100 Bach"
254 depends on X86 && I2C && EXPERIMENTAL
257 If you say yes here you get support for the ASB100 Bach sensor
258 chip found on some Asus mainboards.
260 This driver can also be built as a module. If so, the module
261 will be called asb100.
264 tristate "Attansic ATXP1 VID controller"
265 depends on I2C && EXPERIMENTAL
268 If you say yes here you get support for the Attansic ATXP1 VID
271 If your board have such a chip, you are able to control your CPU
272 core and other voltages.
274 This driver can also be built as a module. If so, the module
275 will be called atxp1.
277 config SENSORS_DS1621
278 tristate "Dallas Semiconductor DS1621 and DS1625"
281 If you say yes here you get support for Dallas Semiconductor
282 DS1621 and DS1625 sensor chips.
284 This driver can also be built as a module. If so, the module
285 will be called ds1621.
287 config SENSORS_I5K_AMB
288 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
289 depends on PCI && EXPERIMENTAL
291 If you say yes here you get support for FB-DIMM AMB temperature
292 monitoring chips on systems with the Intel 5000 series chipset.
294 This driver can also be built as a module. If so, the module
295 will be called i5k_amb.
297 config SENSORS_F71805F
298 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
300 If you say yes here you get support for hardware monitoring
301 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
304 This driver can also be built as a module. If so, the module
305 will be called f71805f.
307 config SENSORS_F71882FG
308 tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000"
310 If you say yes here you get support for hardware monitoring
311 features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG,
312 F71889FG and F8000 Super-I/O chips.
314 This driver can also be built as a module. If so, the module
315 will be called f71882fg.
317 config SENSORS_F75375S
318 tristate "Fintek F75375S/SP and F75373"
321 If you say yes here you get support for hardware monitoring
322 features of the Fintek F75375S/SP and F75373
324 This driver can also be built as a module. If so, the module
325 will be called f75375s.
327 config SENSORS_FSCHMD
328 tristate "Fujitsu Siemens Computers sensor chips"
329 depends on X86 && I2C
331 If you say yes here you get support for the following Fujitsu
332 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
333 Heimdall, Heracles, Hades and Syleus including support for the
336 This is a merged driver for FSC sensor chips replacing the fscpos,
337 fscscy and fscher drivers and adding support for several other FSC
340 This driver can also be built as a module. If so, the module
341 will be called fschmd.
347 If you say yes here you get support for Global Mixed-mode
348 Technology Inc G760A fan speed PWM controller chips.
350 This driver can also be built as a module. If so, the module
351 will be called g760a.
353 config SENSORS_GL518SM
354 tristate "Genesys Logic GL518SM"
357 If you say yes here you get support for Genesys Logic GL518SM
360 This driver can also be built as a module. If so, the module
361 will be called gl518sm.
363 config SENSORS_GL520SM
364 tristate "Genesys Logic GL520SM"
368 If you say yes here you get support for Genesys Logic GL520SM
371 This driver can also be built as a module. If so, the module
372 will be called gl520sm.
374 config SENSORS_GPIO_FAN
376 depends on GENERIC_GPIO
378 If you say yes here you get support for fans connected to GPIO lines.
380 This driver can also be built as a module. If so, the module
381 will be called gpio-fan.
383 config SENSORS_CORETEMP
384 tristate "Intel Core/Core2/Atom temperature sensor"
385 depends on X86 && PCI && EXPERIMENTAL
387 If you say yes here you get support for the temperature
388 sensor inside your CPU. Most of the family 6 CPUs
389 are supported. Check Documentation/hwmon/coretemp for details.
391 config SENSORS_PKGTEMP
392 tristate "Intel processor package temperature sensor"
393 depends on X86 && EXPERIMENTAL
395 If you say yes here you get support for the package level temperature
396 sensor inside your CPU. Check documentation/driver for details.
398 config SENSORS_IBMAEM
399 tristate "IBM Active Energy Manager temperature/power sensors and control"
401 depends on IPMI_HANDLER
403 If you say yes here you get support for the temperature and
404 power sensors and capping hardware in various IBM System X
405 servers that support Active Energy Manager. This includes
406 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
407 and certain HC10/HS2x/LS2x/QS2x blades.
409 This driver can also be built as a module. If so, the module
410 will be called ibmaem.
412 config SENSORS_IBMPEX
413 tristate "IBM PowerExecutive temperature/power sensors"
415 depends on IPMI_HANDLER
417 If you say yes here you get support for the temperature and
418 power sensors in various IBM System X servers that support
419 PowerExecutive. So far this includes the x3350, x3550, x3650,
420 x3655, and x3755; the x3800, x3850, and x3950 models that have
421 PCI Express; and some of the HS2x, LS2x, and QS2x blades.
423 This driver can also be built as a module. If so, the module
424 will be called ibmpex.
427 tristate "ITE IT87xx and compatibles"
430 If you say yes here you get support for ITE IT8705F, IT8712F,
431 IT8716F, IT8718F, IT8720F, IT8721F, IT8726F and IT8758E sensor
432 chips, and the SiS960 clone.
434 This driver can also be built as a module. If so, the module
437 config SENSORS_JZ4740
438 tristate "Ingenic JZ4740 SoC ADC driver"
439 depends on MACH_JZ4740 && MFD_JZ4740_ADC
441 If you say yes here you get support for reading adc values from the ADCIN
442 pin on Ingenic JZ4740 SoC based boards.
444 This driver can also be build as a module. If so, the module will be
448 tristate "JEDEC JC42.4 compliant temperature sensors"
451 If you say yes here you get support for Jedec JC42.4 compliant
452 temperature sensors. Support will include, but not be limited to,
453 ADT7408, CAT34TS02,, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
454 MCP9843, SE97, SE98, STTS424, TSE2002B3, and TS3000B3.
456 This driver can also be built as a module. If so, the module
460 tristate "National Semiconductor LM63 and LM64"
463 If you say yes here you get support for the National
464 Semiconductor LM63 and LM64 remote diode digital temperature
465 sensors with integrated fan control. Such chips are found
466 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
469 This driver can also be built as a module. If so, the module
473 tristate "National Semiconductor LM70 / Texas Instruments TMP121"
474 depends on SPI_MASTER
476 If you say yes here you get support for the National Semiconductor
477 LM70 and Texas Instruments TMP121/TMP123 digital temperature
480 This driver can also be built as a module. If so, the module
484 tristate "National Semiconductor LM73"
487 If you say yes here you get support for National Semiconductor LM73
489 This driver can also be built as a module. If so, the module
493 tristate "National Semiconductor LM75 and compatibles"
496 If you say yes here you get support for one common type of
497 temperature sensor chip, with models including:
499 - Dallas Semiconductor DS75 and DS1775
500 - Maxim MAX6625 and MAX6626
502 - National Semiconductor LM75
504 - ST Microelectronics STDS75
505 - TelCom (now Microchip) TCN75
506 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
509 This driver supports driver model based binding through board
510 specific I2C device tables.
512 It also supports the "legacy" style of driver binding. To use
513 that with some chips which don't replicate LM75 quirks exactly,
514 you may need the "force" module parameter.
516 This driver can also be built as a module. If so, the module
520 tristate "National Semiconductor LM77"
523 If you say yes here you get support for National Semiconductor LM77
526 This driver can also be built as a module. If so, the module
530 tristate "National Semiconductor LM78 and compatibles"
534 If you say yes here you get support for National Semiconductor LM78,
537 This driver can also be built as a module. If so, the module
541 tristate "National Semiconductor LM80"
544 If you say yes here you get support for National Semiconductor
547 This driver can also be built as a module. If so, the module
551 tristate "National Semiconductor LM83 and compatibles"
554 If you say yes here you get support for National Semiconductor
555 LM82 and LM83 sensor chips.
557 This driver can also be built as a module. If so, the module
561 tristate "National Semiconductor LM85 and compatibles"
565 If you say yes here you get support for National Semiconductor LM85
566 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
567 EMC6D101 and EMC6D102.
569 This driver can also be built as a module. If so, the module
573 tristate "National Semiconductor LM87 and compatibles"
577 If you say yes here you get support for National Semiconductor LM87
578 and Analog Devices ADM1024 sensor chips.
580 This driver can also be built as a module. If so, the module
584 tristate "National Semiconductor LM90 and compatibles"
587 If you say yes here you get support for National Semiconductor LM90,
588 LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim
589 MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
590 MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, and Winbond/Nuvoton
591 W83L771W/G/AWG/ASG sensor chips.
593 This driver can also be built as a module. If so, the module
597 tristate "National Semiconductor LM92 and compatibles"
600 If you say yes here you get support for National Semiconductor LM92
601 and Maxim MAX6635 sensor chips.
603 This driver can also be built as a module. If so, the module
607 tristate "National Semiconductor LM93 and compatibles"
611 If you say yes here you get support for National Semiconductor LM93
614 This driver can also be built as a module. If so, the module
617 config SENSORS_LTC4215
618 tristate "Linear Technology LTC4215"
619 depends on I2C && EXPERIMENTAL
622 If you say yes here you get support for Linear Technology LTC4215
623 Hot Swap Controller I2C interface.
625 This driver can also be built as a module. If so, the module will
628 config SENSORS_LTC4245
629 tristate "Linear Technology LTC4245"
630 depends on I2C && EXPERIMENTAL
633 If you say yes here you get support for Linear Technology LTC4245
634 Multiple Supply Hot Swap Controller I2C interface.
636 This driver can also be built as a module. If so, the module will
639 config SENSORS_LTC4261
640 tristate "Linear Technology LTC4261"
641 depends on I2C && EXPERIMENTAL
644 If you say yes here you get support for Linear Technology LTC4261
645 Negative Voltage Hot Swap Controller I2C interface.
647 This driver can also be built as a module. If so, the module will
650 config SENSORS_LM95241
651 tristate "National Semiconductor LM95241 sensor chip"
654 If you say yes here you get support for LM95241 sensor chip.
656 This driver can also be built as a module. If so, the module
657 will be called lm95241.
659 config SENSORS_MAX1111
660 tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
661 depends on SPI_MASTER
663 Say y here to support Maxim's MAX1111 ADC chips.
665 This driver can also be built as a module. If so, the module
666 will be called max1111.
668 config SENSORS_MAX1619
669 tristate "Maxim MAX1619 sensor chip"
672 If you say yes here you get support for MAX1619 sensor chip.
674 This driver can also be built as a module. If so, the module
675 will be called max1619.
677 config SENSORS_MAX6650
678 tristate "Maxim MAX6650 sensor chip"
679 depends on I2C && EXPERIMENTAL
681 If you say yes here you get support for the MAX6650 / MAX6651
684 This driver can also be built as a module. If so, the module
685 will be called max6650.
687 config SENSORS_PC87360
688 tristate "National Semiconductor PC87360 family"
691 If you say yes here you get access to the hardware monitoring
692 functions of the National Semiconductor PC8736x Super-I/O chips.
693 The PC87360, PC87363 and PC87364 only have fan monitoring and
694 control. The PC87365 and PC87366 additionally have voltage and
695 temperature monitoring.
697 This driver can also be built as a module. If so, the module
698 will be called pc87360.
700 config SENSORS_PC87427
701 tristate "National Semiconductor PC87427"
703 If you say yes here you get access to the hardware monitoring
704 functions of the National Semiconductor PC87427 Super-I/O chip.
705 The chip has two distinct logical devices, one for fan speed
706 monitoring and control, and one for voltage and temperature
707 monitoring. Fan speed monitoring and control are supported, as
708 well as temperature monitoring. Voltages aren't supported yet.
710 This driver can also be built as a module. If so, the module
711 will be called pc87427.
713 config SENSORS_PCF8591
714 tristate "Philips PCF8591 ADC/DAC"
718 If you say yes here you get support for Philips PCF8591 4-channel
719 ADC, 1-channel DAC chips.
721 This driver can also be built as a module. If so, the module
722 will be called pcf8591.
724 These devices are hard to detect and rarely found on mainstream
725 hardware. If unsure, say N.
728 tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
729 depends on GENERIC_GPIO
731 If you say yes here you get support for the Sensiron SHT10, SHT11,
732 SHT15, SHT71, SHT75 humidity and temperature sensors.
734 This driver can also be built as a module. If so, the module
735 will be called sht15.
738 tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
741 If you say yes here you get support for the Sensiron SHT21, SHT25
742 humidity and temperature sensors.
744 This driver can also be built as a module. If so, the module
745 will be called sht21.
748 tristate "Samsung built-in ADC"
751 If you say yes here you get support for the on-board ADCs of
752 the Samsung S3C24XX, S3C64XX and other series of SoC
754 This driver can also be built as a module. If so, the module
755 will be called s3c-hwmon.
757 config SENSORS_S3C_RAW
758 bool "Include raw channel attributes in sysfs"
759 depends on SENSORS_S3C
761 Say Y here if you want to include raw copies of all the ADC
764 config SENSORS_SIS5595
765 tristate "Silicon Integrated Systems Corp. SiS5595"
768 If you say yes here you get support for the integrated sensors in
769 SiS5595 South Bridges.
771 This driver can also be built as a module. If so, the module
772 will be called sis5595.
774 config SENSORS_SMM665
775 tristate "Summit Microelectronics SMM665"
776 depends on I2C && EXPERIMENTAL
779 If you say yes here you get support for the hardware monitoring
780 features of the Summit Microelectronics SMM665/SMM665B Six-Channel
781 Active DC Output Controller / Monitor.
783 Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
784 Support for those chips is untested.
786 This driver can also be built as a module. If so, the module will
789 config SENSORS_DME1737
790 tristate "SMSC DME1737, SCH311x and compatibles"
791 depends on I2C && EXPERIMENTAL
794 If you say yes here you get support for the hardware monitoring
795 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
796 Asus A8000 Super-I/O chips.
798 This driver can also be built as a module. If so, the module
799 will be called dme1737.
801 config SENSORS_EMC1403
802 tristate "SMSC EMC1403 thermal sensor"
805 If you say yes here you get support for the SMSC EMC1403
806 temperature monitoring chip.
808 Threshold values can be configured using sysfs.
809 Data from the different diodes are accessible via sysfs.
811 config SENSORS_EMC2103
812 tristate "SMSC EMC2103"
815 If you say yes here you get support for the temperature
816 and fan sensors of the SMSC EMC2103 chips.
818 This driver can also be built as a module. If so, the module
819 will be called emc2103.
821 config SENSORS_SMSC47M1
822 tristate "SMSC LPC47M10x and compatibles"
824 If you say yes here you get support for the integrated fan
825 monitoring and control capabilities of the SMSC LPC47B27x,
826 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
827 LPC47M192, LPC47M292 and LPC47M997 chips.
829 The temperature and voltage sensor features of the LPC47M15x,
830 LPC47M192, LPC47M292 and LPC47M997 are supported by another
831 driver, select also "SMSC LPC47M192 and compatibles" below for
834 This driver can also be built as a module. If so, the module
835 will be called smsc47m1.
837 config SENSORS_SMSC47M192
838 tristate "SMSC LPC47M192 and compatibles"
842 If you say yes here you get support for the temperature and
843 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
846 The fan monitoring and control capabilities of these chips
847 are supported by another driver, select
848 "SMSC LPC47M10x and compatibles" above. You need both drivers
849 if you want fan control and voltage/temperature sensor support.
851 This driver can also be built as a module. If so, the module
852 will be called smsc47m192.
854 config SENSORS_SMSC47B397
855 tristate "SMSC LPC47B397-NC"
856 depends on EXPERIMENTAL
858 If you say yes here you get support for the SMSC LPC47B397-NC
861 This driver can also be built as a module. If so, the module
862 will be called smsc47b397.
864 config SENSORS_ADS7828
865 tristate "Texas Instruments ADS7828"
868 If you say yes here you get support for Texas Instruments ADS7828
869 12-bit 8-channel ADC device.
871 This driver can also be built as a module. If so, the module
872 will be called ads7828.
874 config SENSORS_ADS7871
875 tristate "Texas Instruments ADS7871 A/D converter"
878 If you say yes here you get support for TI ADS7871 & ADS7870
880 This driver can also be built as a module. If so, the module
881 will be called ads7871.
883 config SENSORS_AMC6821
884 tristate "Texas Instruments AMC6821"
885 depends on I2C && EXPERIMENTAL
887 If you say yes here you get support for the Texas Instruments
888 AMC6821 hardware monitoring chips.
890 This driver can also be build as a module. If so, the module
891 will be called amc6821.
893 config SENSORS_THMC50
894 tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
897 If you say yes here you get support for Texas Instruments THMC50
898 sensor chips and clones: the Analog Devices ADM1022.
900 This driver can also be built as a module. If so, the module
901 will be called thmc50.
903 config SENSORS_TMP102
904 tristate "Texas Instruments TMP102"
905 depends on I2C && EXPERIMENTAL
907 If you say yes here you get support for Texas Instruments TMP102
910 This driver can also be built as a module. If so, the module
911 will be called tmp102.
913 config SENSORS_TMP401
914 tristate "Texas Instruments TMP401 and compatibles"
915 depends on I2C && EXPERIMENTAL
917 If you say yes here you get support for Texas Instruments TMP401 and
918 TMP411 temperature sensor chips.
920 This driver can also be built as a module. If so, the module
921 will be called tmp401.
923 config SENSORS_TMP421
924 tristate "Texas Instruments TMP421 and compatible"
925 depends on I2C && EXPERIMENTAL
927 If you say yes here you get support for Texas Instruments TMP421,
928 TMP422 and TMP423 temperature sensor chips.
930 This driver can also be built as a module. If so, the module
931 will be called tmp421.
933 config SENSORS_VIA_CPUTEMP
934 tristate "VIA CPU temperature sensor"
937 If you say yes here you get support for the temperature
938 sensor inside your CPU. Supported are all known variants of
941 config SENSORS_VIA686A
945 If you say yes here you get support for the integrated sensors in
946 Via 686A/B South Bridges.
948 This driver can also be built as a module. If so, the module
949 will be called via686a.
951 config SENSORS_VT1211
952 tristate "VIA VT1211"
955 If you say yes here then you get support for hardware monitoring
956 features of the VIA VT1211 Super-I/O chip.
958 This driver can also be built as a module. If so, the module
959 will be called vt1211.
961 config SENSORS_VT8231
962 tristate "VIA VT8231"
966 If you say yes here then you get support for the integrated sensors
967 in the VIA VT8231 device.
969 This driver can also be built as a module. If so, the module
970 will be called vt8231.
972 config SENSORS_W83781D
973 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
977 If you say yes here you get support for the Winbond W8378x series
978 of sensor chips: the W83781D, W83782D and W83783S, and the similar
981 This driver can also be built as a module. If so, the module
982 will be called w83781d.
984 config SENSORS_W83791D
985 tristate "Winbond W83791D"
989 If you say yes here you get support for the Winbond W83791D chip.
991 This driver can also be built as a module. If so, the module
992 will be called w83791d.
994 config SENSORS_W83792D
995 tristate "Winbond W83792D"
998 If you say yes here you get support for the Winbond W83792D chip.
1000 This driver can also be built as a module. If so, the module
1001 will be called w83792d.
1003 config SENSORS_W83793
1004 tristate "Winbond W83793"
1005 depends on I2C && EXPERIMENTAL
1008 If you say yes here you get support for the Winbond W83793
1009 hardware monitoring chip, including support for the integrated
1012 This driver can also be built as a module. If so, the module
1013 will be called w83793.
1015 config SENSORS_W83795
1016 tristate "Winbond/Nuvoton W83795G/ADG"
1017 depends on I2C && EXPERIMENTAL
1019 If you say yes here you get support for the Winbond W83795G and
1020 W83795ADG hardware monitoring chip.
1022 This driver can also be built as a module. If so, the module
1023 will be called w83795.
1025 config SENSORS_W83795_FANCTRL
1026 boolean "Include fan control support (DANGEROUS)"
1027 depends on SENSORS_W83795 && EXPERIMENTAL
1030 If you say yes here, support for the both manual and automatic
1031 fan control features will be included in the driver.
1033 This part of the code wasn't carefully reviewed and tested yet,
1034 so enabling this option is strongly discouraged on production
1035 servers. Only developers and testers should enable it for the
1038 Please also note that this option will create sysfs attribute
1039 files which may change in the future, so you shouldn't rely
1040 on them being stable.
1042 config SENSORS_W83L785TS
1043 tristate "Winbond W83L785TS-S"
1044 depends on I2C && EXPERIMENTAL
1046 If you say yes here you get support for the Winbond W83L785TS-S
1047 sensor chip, which is used on the Asus A7N8X, among other
1050 This driver can also be built as a module. If so, the module
1051 will be called w83l785ts.
1053 config SENSORS_W83L786NG
1054 tristate "Winbond W83L786NG, W83L786NR"
1055 depends on I2C && EXPERIMENTAL
1057 If you say yes here you get support for the Winbond W83L786NG
1058 and W83L786NR sensor chips.
1060 This driver can also be built as a module. If so, the module
1061 will be called w83l786ng.
1063 config SENSORS_W83627HF
1064 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1067 If you say yes here you get support for the Winbond W836X7 series
1068 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1071 This driver can also be built as a module. If so, the module
1072 will be called w83627hf.
1074 config SENSORS_W83627EHF
1075 tristate "Winbond W83627EHF/EHG/DHG, W83667HG"
1078 If you say yes here you get support for the hardware
1079 monitoring functionality of the Winbond W83627EHF Super-I/O chip.
1081 This driver also supports the W83627EHG, which is the lead-free
1082 version of the W83627EHF, and the W83627DHG, which is a similar
1083 chip suited for specific Intel processors that use PECI such as
1086 This driver also supports the W83667HG chip.
1088 This driver can also be built as a module. If so, the module
1089 will be called w83627ehf.
1091 config SENSORS_WM831X
1092 tristate "WM831x PMICs"
1093 depends on MFD_WM831X
1095 If you say yes here you get support for the hardware
1096 monitoring functionality of the Wolfson Microelectronics
1097 WM831x series of PMICs.
1099 This driver can also be built as a module. If so, the module
1100 will be called wm831x-hwmon.
1102 config SENSORS_WM8350
1103 tristate "Wolfson Microelectronics WM835x"
1104 depends on MFD_WM8350
1106 If you say yes here you get support for the hardware
1107 monitoring features of the WM835x series of PMICs.
1109 This driver can also be built as a module. If so, the module
1110 will be called wm8350-hwmon.
1112 config SENSORS_ULTRA45
1113 tristate "Sun Ultra45 PIC16F747"
1116 This driver provides support for the Ultra45 workstation environmental
1119 config SENSORS_LIS3_SPI
1120 tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
1121 depends on !ACPI && SPI_MASTER && INPUT
1122 select INPUT_POLLDEV
1125 This driver provides support for the LIS3LV02Dx accelerometer connected
1126 via SPI. The accelerometer data is readable via
1127 /sys/devices/platform/lis3lv02d.
1129 This driver also provides an absolute input class device, allowing
1130 the laptop to act as a pinball machine-esque joystick.
1132 This driver can also be built as modules. If so, the core module
1133 will be called lis3lv02d and a specific module for the SPI transport
1134 is called lis3lv02d_spi.
1136 config SENSORS_LIS3_I2C
1137 tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)"
1138 depends on I2C && INPUT
1139 select INPUT_POLLDEV
1142 This driver provides support for the LIS3LV02Dx accelerometer connected
1143 via I2C. The accelerometer data is readable via
1144 /sys/devices/platform/lis3lv02d.
1146 This driver also provides an absolute input class device, allowing
1147 the device to act as a pinball machine-esque joystick.
1149 This driver can also be built as modules. If so, the core module
1150 will be called lis3lv02d and a specific module for the I2C transport
1151 is called lis3lv02d_i2c.
1153 config SENSORS_APPLESMC
1154 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1155 depends on INPUT && X86
1158 select INPUT_POLLDEV
1161 This driver provides support for the Apple System Management
1162 Controller, which provides an accelerometer (Apple Sudden Motion
1163 Sensor), light sensors, temperature sensors, keyboard backlight
1164 control and fan control.
1166 Only Intel-based Apple's computers are supported (MacBook Pro,
1169 Data from the different sensors, keyboard backlight control and fan
1170 control are accessible via sysfs.
1172 This driver also provides an absolute input class device, allowing
1173 the laptop to act as a pinball machine-esque joystick.
1175 Say Y here if you have an applicable laptop and want to experience
1176 the awesome power of applesmc.
1178 config SENSORS_MC13783_ADC
1179 tristate "Freescale MC13783 ADC"
1180 depends on MFD_MC13783
1182 Support for the A/D converter on MC13783 PMIC.
1186 comment "ACPI drivers"
1188 config SENSORS_ATK0110
1189 tristate "ASUS ATK0110"
1190 depends on X86 && EXPERIMENTAL
1192 If you say yes here you get support for the ACPI hardware
1193 monitoring interface found in many ASUS motherboards. This
1194 driver will provide readings of fans, voltages and temperatures
1195 through the system firmware.
1197 This driver can also be built as a module. If so, the module
1198 will be called asus_atk0110.
1200 config SENSORS_LIS3LV02D
1201 tristate "STMicroeletronics LIS3* three-axis digital accelerometer"
1203 select INPUT_POLLDEV
1208 This driver provides support for the LIS3* accelerometers, such as the
1209 LIS3LV02DL or the LIS331DL. In particular, it can be found in a number
1210 of HP laptops, which have the "Mobile Data Protection System 3D" or
1211 "3D DriveGuard" feature. On such systems the driver should load
1212 automatically (via ACPI alias). The accelerometer might also be found
1213 in other systems, connected via SPI or I2C. The accelerometer data is
1214 readable via /sys/devices/platform/lis3lv02d.
1216 This driver also provides an absolute input class device, allowing
1217 a laptop to act as a pinball machine-esque joystick. It provides also
1218 a misc device which can be used to detect free-fall. On HP laptops,
1219 if the led infrastructure is activated, support for a led indicating
1220 disk protection will be provided as hp::hddprotect. For more
1221 information on the feature, refer to Documentation/hwmon/lis3lv02d.
1223 This driver can also be built as modules. If so, the core module
1224 will be called lis3lv02d and a specific module for HP laptops will be
1227 Say Y here if you have an applicable laptop and want to experience
1228 the awesome power of lis3lv02d.