1 /* ------------------------------------------------------------
3 * (C) Copyright IBM Corporation 1994, 2004
4 * Authors: Colin DeVilbiss (devilbis@us.ibm.com)
5 * Santiago Leon (santil@us.ibm.com)
6 * Dave Boutcher (sleddog@us.ibm.com)
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
23 * ------------------------------------------------------------
24 * Emulation of a SCSI host adapter for Virtual I/O devices
26 * This driver supports the SCSI adapter implemented by the IBM
27 * Power5 firmware. That SCSI adapter is not a physical adapter,
28 * but allows Linux SCSI peripheral drivers to directly
29 * access devices in another logical partition on the physical system.
31 * The virtual adapter(s) are present in the open firmware device
32 * tree just like real adapters.
34 * One of the capabilities provided on these systems is the ability
35 * to DMA between partitions. The architecture states that for VSCSI,
36 * the server side is allowed to DMA to and from the client. The client
37 * is never trusted to DMA to or from the server directly.
39 * Messages are sent between partitions on a "Command/Response Queue"
40 * (CRQ), which is just a buffer of 16 byte entries in the receiver's
41 * Senders cannot access the buffer directly, but send messages by
42 * making a hypervisor call and passing in the 16 bytes. The hypervisor
43 * puts the message in the next 16 byte space in round-robin fashion,
44 * turns on the high order bit of the message (the valid bit), and
45 * generates an interrupt to the receiver (if interrupts are turned on.)
46 * The receiver just turns off the valid bit when they have copied out
49 * The VSCSI client builds a SCSI Remote Protocol (SRP) Information Unit
50 * (IU) (as defined in the T10 standard available at www.t10.org), gets
51 * a DMA address for the message, and sends it to the server as the
52 * payload of a CRQ message. The server DMAs the SRP IU and processes it,
53 * including doing any additional data transfers. When it is done, it
54 * DMAs the SRP response back to the same address as the request came from,
55 * and sends a CRQ message back to inform the client that the request has
58 * Note that some of the underlying infrastructure is different between
59 * machines conforming to the "RS/6000 Platform Architecture" (RPA) and
60 * the older iSeries hypervisor models. To support both, some low level
61 * routines have been broken out into rpa_vscsi.c and iseries_vscsi.c.
62 * The Makefile should pick one, not two, not zero, of these.
64 * TODO: This is currently pretty tied to the IBM i/pSeries hypervisor
65 * interfaces. It would be really nice to abstract this above an RDMA
69 #include <linux/module.h>
70 #include <linux/moduleparam.h>
71 #include <linux/dma-mapping.h>
72 #include <linux/delay.h>
73 #include <linux/slab.h>
76 #include <linux/kthread.h>
77 #include <asm/firmware.h>
79 #include <scsi/scsi.h>
80 #include <scsi/scsi_cmnd.h>
81 #include <scsi/scsi_host.h>
82 #include <scsi/scsi_device.h>
83 #include <scsi/scsi_transport_srp.h>
86 /* The values below are somewhat arbitrary default values, but
87 * OS/400 will use 3 busses (disks, CDs, tapes, I think.)
88 * Note that there are 3 bits of channel value, 6 bits of id, and
91 static int max_id
= 64;
92 static int max_channel
= 3;
93 static int init_timeout
= 300;
94 static int login_timeout
= 60;
95 static int info_timeout
= 30;
96 static int abort_timeout
= 60;
97 static int reset_timeout
= 60;
98 static int max_requests
= IBMVSCSI_MAX_REQUESTS_DEFAULT
;
99 static int max_events
= IBMVSCSI_MAX_REQUESTS_DEFAULT
+ 2;
100 static int fast_fail
= 1;
101 static int client_reserve
= 1;
103 static struct scsi_transport_template
*ibmvscsi_transport_template
;
105 #define IBMVSCSI_VERSION "1.5.9"
107 static struct ibmvscsi_ops
*ibmvscsi_ops
;
109 MODULE_DESCRIPTION("IBM Virtual SCSI");
110 MODULE_AUTHOR("Dave Boutcher");
111 MODULE_LICENSE("GPL");
112 MODULE_VERSION(IBMVSCSI_VERSION
);
114 module_param_named(max_id
, max_id
, int, S_IRUGO
| S_IWUSR
);
115 MODULE_PARM_DESC(max_id
, "Largest ID value for each channel");
116 module_param_named(max_channel
, max_channel
, int, S_IRUGO
| S_IWUSR
);
117 MODULE_PARM_DESC(max_channel
, "Largest channel value");
118 module_param_named(init_timeout
, init_timeout
, int, S_IRUGO
| S_IWUSR
);
119 MODULE_PARM_DESC(init_timeout
, "Initialization timeout in seconds");
120 module_param_named(max_requests
, max_requests
, int, S_IRUGO
);
121 MODULE_PARM_DESC(max_requests
, "Maximum requests for this adapter");
122 module_param_named(fast_fail
, fast_fail
, int, S_IRUGO
| S_IWUSR
);
123 MODULE_PARM_DESC(fast_fail
, "Enable fast fail. [Default=1]");
124 module_param_named(client_reserve
, client_reserve
, int, S_IRUGO
);
125 MODULE_PARM_DESC(client_reserve
, "Attempt client managed reserve/release");
127 /* ------------------------------------------------------------
128 * Routines for the event pool and event structs
131 * initialize_event_pool: - Allocates and initializes the event pool for a host
132 * @pool: event_pool to be initialized
133 * @size: Number of events in pool
134 * @hostdata: ibmvscsi_host_data who owns the event pool
136 * Returns zero on success.
138 static int initialize_event_pool(struct event_pool
*pool
,
139 int size
, struct ibmvscsi_host_data
*hostdata
)
145 pool
->events
= kcalloc(pool
->size
, sizeof(*pool
->events
), GFP_KERNEL
);
150 dma_alloc_coherent(hostdata
->dev
,
151 pool
->size
* sizeof(*pool
->iu_storage
),
153 if (!pool
->iu_storage
) {
158 for (i
= 0; i
< pool
->size
; ++i
) {
159 struct srp_event_struct
*evt
= &pool
->events
[i
];
160 memset(&evt
->crq
, 0x00, sizeof(evt
->crq
));
161 atomic_set(&evt
->free
, 1);
162 evt
->crq
.valid
= 0x80;
163 evt
->crq
.IU_length
= sizeof(*evt
->xfer_iu
);
164 evt
->crq
.IU_data_ptr
= pool
->iu_token
+
165 sizeof(*evt
->xfer_iu
) * i
;
166 evt
->xfer_iu
= pool
->iu_storage
+ i
;
167 evt
->hostdata
= hostdata
;
168 evt
->ext_list
= NULL
;
169 evt
->ext_list_token
= 0;
176 * release_event_pool: - Frees memory of an event pool of a host
177 * @pool: event_pool to be released
178 * @hostdata: ibmvscsi_host_data who owns the even pool
180 * Returns zero on success.
182 static void release_event_pool(struct event_pool
*pool
,
183 struct ibmvscsi_host_data
*hostdata
)
186 for (i
= 0; i
< pool
->size
; ++i
) {
187 if (atomic_read(&pool
->events
[i
].free
) != 1)
189 if (pool
->events
[i
].ext_list
) {
190 dma_free_coherent(hostdata
->dev
,
191 SG_ALL
* sizeof(struct srp_direct_buf
),
192 pool
->events
[i
].ext_list
,
193 pool
->events
[i
].ext_list_token
);
197 dev_warn(hostdata
->dev
, "releasing event pool with %d "
198 "events still in use?\n", in_use
);
200 dma_free_coherent(hostdata
->dev
,
201 pool
->size
* sizeof(*pool
->iu_storage
),
202 pool
->iu_storage
, pool
->iu_token
);
206 * valid_event_struct: - Determines if event is valid.
207 * @pool: event_pool that contains the event
208 * @evt: srp_event_struct to be checked for validity
210 * Returns zero if event is invalid, one otherwise.
212 static int valid_event_struct(struct event_pool
*pool
,
213 struct srp_event_struct
*evt
)
215 int index
= evt
- pool
->events
;
216 if (index
< 0 || index
>= pool
->size
) /* outside of bounds */
218 if (evt
!= pool
->events
+ index
) /* unaligned */
224 * ibmvscsi_free-event_struct: - Changes status of event to "free"
225 * @pool: event_pool that contains the event
226 * @evt: srp_event_struct to be modified
229 static void free_event_struct(struct event_pool
*pool
,
230 struct srp_event_struct
*evt
)
232 if (!valid_event_struct(pool
, evt
)) {
233 dev_err(evt
->hostdata
->dev
, "Freeing invalid event_struct %p "
234 "(not in pool %p)\n", evt
, pool
->events
);
237 if (atomic_inc_return(&evt
->free
) != 1) {
238 dev_err(evt
->hostdata
->dev
, "Freeing event_struct %p "
239 "which is not in use!\n", evt
);
245 * get_evt_struct: - Gets the next free event in pool
246 * @pool: event_pool that contains the events to be searched
248 * Returns the next event in "free" state, and NULL if none are free.
249 * Note that no synchronization is done here, we assume the host_lock
250 * will syncrhonze things.
252 static struct srp_event_struct
*get_event_struct(struct event_pool
*pool
)
255 int poolsize
= pool
->size
;
256 int offset
= pool
->next
;
258 for (i
= 0; i
< poolsize
; i
++) {
259 offset
= (offset
+ 1) % poolsize
;
260 if (!atomic_dec_if_positive(&pool
->events
[offset
].free
)) {
262 return &pool
->events
[offset
];
266 printk(KERN_ERR
"ibmvscsi: found no event struct in pool!\n");
271 * init_event_struct: Initialize fields in an event struct that are always
274 * @done: Routine to call when the event is responded to
275 * @format: SRP or MAD format
276 * @timeout: timeout value set in the CRQ
278 static void init_event_struct(struct srp_event_struct
*evt_struct
,
279 void (*done
) (struct srp_event_struct
*),
283 evt_struct
->cmnd
= NULL
;
284 evt_struct
->cmnd_done
= NULL
;
285 evt_struct
->sync_srp
= NULL
;
286 evt_struct
->crq
.format
= format
;
287 evt_struct
->crq
.timeout
= timeout
;
288 evt_struct
->done
= done
;
291 /* ------------------------------------------------------------
292 * Routines for receiving SCSI responses from the hosting partition
296 * set_srp_direction: Set the fields in the srp related to data
297 * direction and number of buffers based on the direction in
298 * the scsi_cmnd and the number of buffers
300 static void set_srp_direction(struct scsi_cmnd
*cmd
,
301 struct srp_cmd
*srp_cmd
,
310 fmt
= SRP_DATA_DESC_DIRECT
;
312 fmt
= SRP_DATA_DESC_INDIRECT
;
313 numbuf
= min(numbuf
, MAX_INDIRECT_BUFS
);
315 if (cmd
->sc_data_direction
== DMA_TO_DEVICE
)
316 srp_cmd
->data_out_desc_cnt
= numbuf
;
318 srp_cmd
->data_in_desc_cnt
= numbuf
;
321 if (cmd
->sc_data_direction
== DMA_TO_DEVICE
)
322 srp_cmd
->buf_fmt
= fmt
<< 4;
324 srp_cmd
->buf_fmt
= fmt
;
328 * unmap_cmd_data: - Unmap data pointed in srp_cmd based on the format
329 * @cmd: srp_cmd whose additional_data member will be unmapped
330 * @dev: device for which the memory is mapped
333 static void unmap_cmd_data(struct srp_cmd
*cmd
,
334 struct srp_event_struct
*evt_struct
,
339 out_fmt
= cmd
->buf_fmt
>> 4;
340 in_fmt
= cmd
->buf_fmt
& ((1U << 4) - 1);
342 if (out_fmt
== SRP_NO_DATA_DESC
&& in_fmt
== SRP_NO_DATA_DESC
)
345 if (evt_struct
->cmnd
)
346 scsi_dma_unmap(evt_struct
->cmnd
);
349 static int map_sg_list(struct scsi_cmnd
*cmd
, int nseg
,
350 struct srp_direct_buf
*md
)
353 struct scatterlist
*sg
;
354 u64 total_length
= 0;
356 scsi_for_each_sg(cmd
, sg
, nseg
, i
) {
357 struct srp_direct_buf
*descr
= md
+ i
;
358 descr
->va
= sg_dma_address(sg
);
359 descr
->len
= sg_dma_len(sg
);
361 total_length
+= sg_dma_len(sg
);
367 * map_sg_data: - Maps dma for a scatterlist and initializes decriptor fields
368 * @cmd: Scsi_Cmnd with the scatterlist
369 * @srp_cmd: srp_cmd that contains the memory descriptor
370 * @dev: device for which to map dma memory
372 * Called by map_data_for_srp_cmd() when building srp cmd from scsi cmd.
373 * Returns 1 on success.
375 static int map_sg_data(struct scsi_cmnd
*cmd
,
376 struct srp_event_struct
*evt_struct
,
377 struct srp_cmd
*srp_cmd
, struct device
*dev
)
381 u64 total_length
= 0;
382 struct srp_direct_buf
*data
=
383 (struct srp_direct_buf
*) srp_cmd
->add_data
;
384 struct srp_indirect_buf
*indirect
=
385 (struct srp_indirect_buf
*) data
;
387 sg_mapped
= scsi_dma_map(cmd
);
390 else if (sg_mapped
< 0)
393 set_srp_direction(cmd
, srp_cmd
, sg_mapped
);
395 /* special case; we can use a single direct descriptor */
396 if (sg_mapped
== 1) {
397 map_sg_list(cmd
, sg_mapped
, data
);
401 indirect
->table_desc
.va
= 0;
402 indirect
->table_desc
.len
= sg_mapped
* sizeof(struct srp_direct_buf
);
403 indirect
->table_desc
.key
= 0;
405 if (sg_mapped
<= MAX_INDIRECT_BUFS
) {
406 total_length
= map_sg_list(cmd
, sg_mapped
,
407 &indirect
->desc_list
[0]);
408 indirect
->len
= total_length
;
412 /* get indirect table */
413 if (!evt_struct
->ext_list
) {
414 evt_struct
->ext_list
= (struct srp_direct_buf
*)
415 dma_alloc_coherent(dev
,
416 SG_ALL
* sizeof(struct srp_direct_buf
),
417 &evt_struct
->ext_list_token
, 0);
418 if (!evt_struct
->ext_list
) {
419 if (!firmware_has_feature(FW_FEATURE_CMO
))
420 sdev_printk(KERN_ERR
, cmd
->device
,
421 "Can't allocate memory "
422 "for indirect table\n");
428 total_length
= map_sg_list(cmd
, sg_mapped
, evt_struct
->ext_list
);
430 indirect
->len
= total_length
;
431 indirect
->table_desc
.va
= evt_struct
->ext_list_token
;
432 indirect
->table_desc
.len
= sg_mapped
* sizeof(indirect
->desc_list
[0]);
433 memcpy(indirect
->desc_list
, evt_struct
->ext_list
,
434 MAX_INDIRECT_BUFS
* sizeof(struct srp_direct_buf
));
439 * map_data_for_srp_cmd: - Calls functions to map data for srp cmds
440 * @cmd: struct scsi_cmnd with the memory to be mapped
441 * @srp_cmd: srp_cmd that contains the memory descriptor
442 * @dev: dma device for which to map dma memory
444 * Called by scsi_cmd_to_srp_cmd() when converting scsi cmds to srp cmds
445 * Returns 1 on success.
447 static int map_data_for_srp_cmd(struct scsi_cmnd
*cmd
,
448 struct srp_event_struct
*evt_struct
,
449 struct srp_cmd
*srp_cmd
, struct device
*dev
)
451 switch (cmd
->sc_data_direction
) {
452 case DMA_FROM_DEVICE
:
457 case DMA_BIDIRECTIONAL
:
458 sdev_printk(KERN_ERR
, cmd
->device
,
459 "Can't map DMA_BIDIRECTIONAL to read/write\n");
462 sdev_printk(KERN_ERR
, cmd
->device
,
463 "Unknown data direction 0x%02x; can't map!\n",
464 cmd
->sc_data_direction
);
468 return map_sg_data(cmd
, evt_struct
, srp_cmd
, dev
);
472 * purge_requests: Our virtual adapter just shut down. purge any sent requests
473 * @hostdata: the adapter
475 static void purge_requests(struct ibmvscsi_host_data
*hostdata
, int error_code
)
477 struct srp_event_struct
*evt
;
480 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
481 while (!list_empty(&hostdata
->sent
)) {
482 evt
= list_first_entry(&hostdata
->sent
, struct srp_event_struct
, list
);
483 list_del(&evt
->list
);
484 del_timer(&evt
->timer
);
486 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
488 evt
->cmnd
->result
= (error_code
<< 16);
489 unmap_cmd_data(&evt
->iu
.srp
.cmd
, evt
,
492 evt
->cmnd_done(evt
->cmnd
);
493 } else if (evt
->done
)
495 free_event_struct(&evt
->hostdata
->pool
, evt
);
496 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
498 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
502 * ibmvscsi_reset_host - Reset the connection to the server
503 * @hostdata: struct ibmvscsi_host_data to reset
505 static void ibmvscsi_reset_host(struct ibmvscsi_host_data
*hostdata
)
507 scsi_block_requests(hostdata
->host
);
508 atomic_set(&hostdata
->request_limit
, 0);
510 purge_requests(hostdata
, DID_ERROR
);
511 hostdata
->reset_crq
= 1;
512 wake_up(&hostdata
->work_wait_q
);
516 * ibmvscsi_timeout - Internal command timeout handler
517 * @evt_struct: struct srp_event_struct that timed out
519 * Called when an internally generated command times out
521 static void ibmvscsi_timeout(struct srp_event_struct
*evt_struct
)
523 struct ibmvscsi_host_data
*hostdata
= evt_struct
->hostdata
;
525 dev_err(hostdata
->dev
, "Command timed out (%x). Resetting connection\n",
526 evt_struct
->iu
.srp
.cmd
.opcode
);
528 ibmvscsi_reset_host(hostdata
);
532 /* ------------------------------------------------------------
533 * Routines for sending and receiving SRPs
536 * ibmvscsi_send_srp_event: - Transforms event to u64 array and calls send_crq()
537 * @evt_struct: evt_struct to be sent
538 * @hostdata: ibmvscsi_host_data of host
539 * @timeout: timeout in seconds - 0 means do not time command
541 * Returns the value returned from ibmvscsi_send_crq(). (Zero for success)
542 * Note that this routine assumes that host_lock is held for synchronization
544 static int ibmvscsi_send_srp_event(struct srp_event_struct
*evt_struct
,
545 struct ibmvscsi_host_data
*hostdata
,
546 unsigned long timeout
)
548 u64
*crq_as_u64
= (u64
*) &evt_struct
->crq
;
549 int request_status
= 0;
553 /* If we have exhausted our request limit, just fail this request,
554 * unless it is for a reset or abort.
555 * Note that there are rare cases involving driver generated requests
556 * (such as task management requests) that the mid layer may think we
557 * can handle more requests (can_queue) when we actually can't
559 if (evt_struct
->crq
.format
== VIOSRP_SRP_FORMAT
) {
562 atomic_dec_if_positive(&hostdata
->request_limit
);
563 /* If request limit was -1 when we started, it is now even
566 if (request_status
< -1)
568 /* Otherwise, we may have run out of requests. */
569 /* If request limit was 0 when we started the adapter is in the
570 * process of performing a login with the server adapter, or
571 * we may have run out of requests.
573 else if (request_status
== -1 &&
574 evt_struct
->iu
.srp
.login_req
.opcode
!= SRP_LOGIN_REQ
)
576 /* Abort and reset calls should make it through.
577 * Nothing except abort and reset should use the last two
578 * slots unless we had two or less to begin with.
580 else if (request_status
< 2 &&
581 evt_struct
->iu
.srp
.cmd
.opcode
!= SRP_TSK_MGMT
) {
582 /* In the case that we have less than two requests
583 * available, check the server limit as a combination
584 * of the request limit and the number of requests
585 * in-flight (the size of the send list). If the
586 * server limit is greater than 2, return busy so
587 * that the last two are reserved for reset and abort.
589 int server_limit
= request_status
;
590 struct srp_event_struct
*tmp_evt
;
592 list_for_each_entry(tmp_evt
, &hostdata
->sent
, list
) {
596 if (server_limit
> 2)
601 /* Copy the IU into the transfer area */
602 *evt_struct
->xfer_iu
= evt_struct
->iu
;
603 evt_struct
->xfer_iu
->srp
.rsp
.tag
= (u64
)evt_struct
;
605 /* Add this to the sent list. We need to do this
606 * before we actually send
607 * in case it comes back REALLY fast
609 list_add_tail(&evt_struct
->list
, &hostdata
->sent
);
611 init_timer(&evt_struct
->timer
);
613 evt_struct
->timer
.data
= (unsigned long) evt_struct
;
614 evt_struct
->timer
.expires
= jiffies
+ (timeout
* HZ
);
615 evt_struct
->timer
.function
= (void (*)(unsigned long))ibmvscsi_timeout
;
616 add_timer(&evt_struct
->timer
);
620 ibmvscsi_ops
->send_crq(hostdata
, crq_as_u64
[0], crq_as_u64
[1])) != 0) {
621 list_del(&evt_struct
->list
);
622 del_timer(&evt_struct
->timer
);
624 /* If send_crq returns H_CLOSED, return SCSI_MLQUEUE_HOST_BUSY.
625 * Firmware will send a CRQ with a transport event (0xFF) to
626 * tell this client what has happened to the transport. This
627 * will be handled in ibmvscsi_handle_crq()
629 if (rc
== H_CLOSED
) {
630 dev_warn(hostdata
->dev
, "send warning. "
631 "Receive queue closed, will retry.\n");
634 dev_err(hostdata
->dev
, "send error %d\n", rc
);
636 atomic_inc(&hostdata
->request_limit
);
643 unmap_cmd_data(&evt_struct
->iu
.srp
.cmd
, evt_struct
, hostdata
->dev
);
645 free_event_struct(&hostdata
->pool
, evt_struct
);
646 if (srp_req
&& request_status
!= -1)
647 atomic_inc(&hostdata
->request_limit
);
648 return SCSI_MLQUEUE_HOST_BUSY
;
651 unmap_cmd_data(&evt_struct
->iu
.srp
.cmd
, evt_struct
, hostdata
->dev
);
653 if (evt_struct
->cmnd
!= NULL
) {
654 evt_struct
->cmnd
->result
= DID_ERROR
<< 16;
655 evt_struct
->cmnd_done(evt_struct
->cmnd
);
656 } else if (evt_struct
->done
)
657 evt_struct
->done(evt_struct
);
659 free_event_struct(&hostdata
->pool
, evt_struct
);
664 * handle_cmd_rsp: - Handle responses from commands
665 * @evt_struct: srp_event_struct to be handled
667 * Used as a callback by when sending scsi cmds.
668 * Gets called by ibmvscsi_handle_crq()
670 static void handle_cmd_rsp(struct srp_event_struct
*evt_struct
)
672 struct srp_rsp
*rsp
= &evt_struct
->xfer_iu
->srp
.rsp
;
673 struct scsi_cmnd
*cmnd
= evt_struct
->cmnd
;
675 if (unlikely(rsp
->opcode
!= SRP_RSP
)) {
676 if (printk_ratelimit())
677 dev_warn(evt_struct
->hostdata
->dev
,
678 "bad SRP RSP type %d\n", rsp
->opcode
);
682 cmnd
->result
|= rsp
->status
;
683 if (((cmnd
->result
>> 1) & 0x1f) == CHECK_CONDITION
)
684 memcpy(cmnd
->sense_buffer
,
686 rsp
->sense_data_len
);
687 unmap_cmd_data(&evt_struct
->iu
.srp
.cmd
,
689 evt_struct
->hostdata
->dev
);
691 if (rsp
->flags
& SRP_RSP_FLAG_DOOVER
)
692 scsi_set_resid(cmnd
, rsp
->data_out_res_cnt
);
693 else if (rsp
->flags
& SRP_RSP_FLAG_DIOVER
)
694 scsi_set_resid(cmnd
, rsp
->data_in_res_cnt
);
697 if (evt_struct
->cmnd_done
)
698 evt_struct
->cmnd_done(cmnd
);
702 * lun_from_dev: - Returns the lun of the scsi device
703 * @dev: struct scsi_device
706 static inline u16
lun_from_dev(struct scsi_device
*dev
)
708 return (0x2 << 14) | (dev
->id
<< 8) | (dev
->channel
<< 5) | dev
->lun
;
712 * ibmvscsi_queue: - The queuecommand function of the scsi template
713 * @cmd: struct scsi_cmnd to be executed
714 * @done: Callback function to be called when cmd is completed
716 static int ibmvscsi_queuecommand_lck(struct scsi_cmnd
*cmnd
,
717 void (*done
) (struct scsi_cmnd
*))
719 struct srp_cmd
*srp_cmd
;
720 struct srp_event_struct
*evt_struct
;
721 struct srp_indirect_buf
*indirect
;
722 struct ibmvscsi_host_data
*hostdata
= shost_priv(cmnd
->device
->host
);
723 u16 lun
= lun_from_dev(cmnd
->device
);
726 cmnd
->result
= (DID_OK
<< 16);
727 evt_struct
= get_event_struct(&hostdata
->pool
);
729 return SCSI_MLQUEUE_HOST_BUSY
;
731 /* Set up the actual SRP IU */
732 srp_cmd
= &evt_struct
->iu
.srp
.cmd
;
733 memset(srp_cmd
, 0x00, SRP_MAX_IU_LEN
);
734 srp_cmd
->opcode
= SRP_CMD
;
735 memcpy(srp_cmd
->cdb
, cmnd
->cmnd
, sizeof(srp_cmd
->cdb
));
736 srp_cmd
->lun
= ((u64
) lun
) << 48;
738 if (!map_data_for_srp_cmd(cmnd
, evt_struct
, srp_cmd
, hostdata
->dev
)) {
739 if (!firmware_has_feature(FW_FEATURE_CMO
))
740 sdev_printk(KERN_ERR
, cmnd
->device
,
741 "couldn't convert cmd to srp_cmd\n");
742 free_event_struct(&hostdata
->pool
, evt_struct
);
743 return SCSI_MLQUEUE_HOST_BUSY
;
746 init_event_struct(evt_struct
,
749 cmnd
->request
->timeout
/HZ
);
751 evt_struct
->cmnd
= cmnd
;
752 evt_struct
->cmnd_done
= done
;
754 /* Fix up dma address of the buffer itself */
755 indirect
= (struct srp_indirect_buf
*) srp_cmd
->add_data
;
756 out_fmt
= srp_cmd
->buf_fmt
>> 4;
757 in_fmt
= srp_cmd
->buf_fmt
& ((1U << 4) - 1);
758 if ((in_fmt
== SRP_DATA_DESC_INDIRECT
||
759 out_fmt
== SRP_DATA_DESC_INDIRECT
) &&
760 indirect
->table_desc
.va
== 0) {
761 indirect
->table_desc
.va
= evt_struct
->crq
.IU_data_ptr
+
762 offsetof(struct srp_cmd
, add_data
) +
763 offsetof(struct srp_indirect_buf
, desc_list
);
766 return ibmvscsi_send_srp_event(evt_struct
, hostdata
, 0);
769 static DEF_SCSI_QCMD(ibmvscsi_queuecommand
)
771 /* ------------------------------------------------------------
772 * Routines for driver initialization
776 * map_persist_bufs: - Pre-map persistent data for adapter logins
777 * @hostdata: ibmvscsi_host_data of host
779 * Map the capabilities and adapter info DMA buffers to avoid runtime failures.
780 * Return 1 on error, 0 on success.
782 static int map_persist_bufs(struct ibmvscsi_host_data
*hostdata
)
785 hostdata
->caps_addr
= dma_map_single(hostdata
->dev
, &hostdata
->caps
,
786 sizeof(hostdata
->caps
), DMA_BIDIRECTIONAL
);
788 if (dma_mapping_error(hostdata
->dev
, hostdata
->caps_addr
)) {
789 dev_err(hostdata
->dev
, "Unable to map capabilities buffer!\n");
793 hostdata
->adapter_info_addr
= dma_map_single(hostdata
->dev
,
794 &hostdata
->madapter_info
,
795 sizeof(hostdata
->madapter_info
),
797 if (dma_mapping_error(hostdata
->dev
, hostdata
->adapter_info_addr
)) {
798 dev_err(hostdata
->dev
, "Unable to map adapter info buffer!\n");
799 dma_unmap_single(hostdata
->dev
, hostdata
->caps_addr
,
800 sizeof(hostdata
->caps
), DMA_BIDIRECTIONAL
);
808 * unmap_persist_bufs: - Unmap persistent data needed for adapter logins
809 * @hostdata: ibmvscsi_host_data of host
811 * Unmap the capabilities and adapter info DMA buffers
813 static void unmap_persist_bufs(struct ibmvscsi_host_data
*hostdata
)
815 dma_unmap_single(hostdata
->dev
, hostdata
->caps_addr
,
816 sizeof(hostdata
->caps
), DMA_BIDIRECTIONAL
);
818 dma_unmap_single(hostdata
->dev
, hostdata
->adapter_info_addr
,
819 sizeof(hostdata
->madapter_info
), DMA_BIDIRECTIONAL
);
823 * login_rsp: - Handle response to SRP login request
824 * @evt_struct: srp_event_struct with the response
826 * Used as a "done" callback by when sending srp_login. Gets called
827 * by ibmvscsi_handle_crq()
829 static void login_rsp(struct srp_event_struct
*evt_struct
)
831 struct ibmvscsi_host_data
*hostdata
= evt_struct
->hostdata
;
832 switch (evt_struct
->xfer_iu
->srp
.login_rsp
.opcode
) {
833 case SRP_LOGIN_RSP
: /* it worked! */
835 case SRP_LOGIN_REJ
: /* refused! */
836 dev_info(hostdata
->dev
, "SRP_LOGIN_REJ reason %u\n",
837 evt_struct
->xfer_iu
->srp
.login_rej
.reason
);
839 atomic_set(&hostdata
->request_limit
, -1);
842 dev_err(hostdata
->dev
, "Invalid login response typecode 0x%02x!\n",
843 evt_struct
->xfer_iu
->srp
.login_rsp
.opcode
);
845 atomic_set(&hostdata
->request_limit
, -1);
849 dev_info(hostdata
->dev
, "SRP_LOGIN succeeded\n");
850 hostdata
->client_migrated
= 0;
852 /* Now we know what the real request-limit is.
853 * This value is set rather than added to request_limit because
854 * request_limit could have been set to -1 by this client.
856 atomic_set(&hostdata
->request_limit
,
857 evt_struct
->xfer_iu
->srp
.login_rsp
.req_lim_delta
);
859 /* If we had any pending I/Os, kick them */
860 scsi_unblock_requests(hostdata
->host
);
864 * send_srp_login: - Sends the srp login
865 * @hostdata: ibmvscsi_host_data of host
867 * Returns zero if successful.
869 static int send_srp_login(struct ibmvscsi_host_data
*hostdata
)
873 struct srp_login_req
*login
;
874 struct srp_event_struct
*evt_struct
= get_event_struct(&hostdata
->pool
);
877 init_event_struct(evt_struct
, login_rsp
,
878 VIOSRP_SRP_FORMAT
, login_timeout
);
880 login
= &evt_struct
->iu
.srp
.login_req
;
881 memset(login
, 0, sizeof(*login
));
882 login
->opcode
= SRP_LOGIN_REQ
;
883 login
->req_it_iu_len
= sizeof(union srp_iu
);
884 login
->req_buf_fmt
= SRP_BUF_FORMAT_DIRECT
| SRP_BUF_FORMAT_INDIRECT
;
886 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
887 /* Start out with a request limit of 0, since this is negotiated in
888 * the login request we are just sending and login requests always
889 * get sent by the driver regardless of request_limit.
891 atomic_set(&hostdata
->request_limit
, 0);
893 rc
= ibmvscsi_send_srp_event(evt_struct
, hostdata
, login_timeout
* 2);
894 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
895 dev_info(hostdata
->dev
, "sent SRP login\n");
900 * capabilities_rsp: - Handle response to MAD adapter capabilities request
901 * @evt_struct: srp_event_struct with the response
903 * Used as a "done" callback by when sending adapter_info.
905 static void capabilities_rsp(struct srp_event_struct
*evt_struct
)
907 struct ibmvscsi_host_data
*hostdata
= evt_struct
->hostdata
;
909 if (evt_struct
->xfer_iu
->mad
.capabilities
.common
.status
) {
910 dev_err(hostdata
->dev
, "error 0x%X getting capabilities info\n",
911 evt_struct
->xfer_iu
->mad
.capabilities
.common
.status
);
913 if (hostdata
->caps
.migration
.common
.server_support
!= SERVER_SUPPORTS_CAP
)
914 dev_info(hostdata
->dev
, "Partition migration not supported\n");
916 if (client_reserve
) {
917 if (hostdata
->caps
.reserve
.common
.server_support
==
919 dev_info(hostdata
->dev
, "Client reserve enabled\n");
921 dev_info(hostdata
->dev
, "Client reserve not supported\n");
925 send_srp_login(hostdata
);
929 * send_mad_capabilities: - Sends the mad capabilities request
930 * and stores the result so it can be retrieved with
931 * @hostdata: ibmvscsi_host_data of host
933 static void send_mad_capabilities(struct ibmvscsi_host_data
*hostdata
)
935 struct viosrp_capabilities
*req
;
936 struct srp_event_struct
*evt_struct
;
938 struct device_node
*of_node
= hostdata
->dev
->of_node
;
939 const char *location
;
941 evt_struct
= get_event_struct(&hostdata
->pool
);
944 init_event_struct(evt_struct
, capabilities_rsp
,
945 VIOSRP_MAD_FORMAT
, info_timeout
);
947 req
= &evt_struct
->iu
.mad
.capabilities
;
948 memset(req
, 0, sizeof(*req
));
950 hostdata
->caps
.flags
= CAP_LIST_SUPPORTED
;
951 if (hostdata
->client_migrated
)
952 hostdata
->caps
.flags
|= CLIENT_MIGRATED
;
954 strncpy(hostdata
->caps
.name
, dev_name(&hostdata
->host
->shost_gendev
),
955 sizeof(hostdata
->caps
.name
));
956 hostdata
->caps
.name
[sizeof(hostdata
->caps
.name
) - 1] = '\0';
958 location
= of_get_property(of_node
, "ibm,loc-code", NULL
);
959 location
= location
? location
: dev_name(hostdata
->dev
);
960 strncpy(hostdata
->caps
.loc
, location
, sizeof(hostdata
->caps
.loc
));
961 hostdata
->caps
.loc
[sizeof(hostdata
->caps
.loc
) - 1] = '\0';
963 req
->common
.type
= VIOSRP_CAPABILITIES_TYPE
;
964 req
->buffer
= hostdata
->caps_addr
;
966 hostdata
->caps
.migration
.common
.cap_type
= MIGRATION_CAPABILITIES
;
967 hostdata
->caps
.migration
.common
.length
= sizeof(hostdata
->caps
.migration
);
968 hostdata
->caps
.migration
.common
.server_support
= SERVER_SUPPORTS_CAP
;
969 hostdata
->caps
.migration
.ecl
= 1;
971 if (client_reserve
) {
972 hostdata
->caps
.reserve
.common
.cap_type
= RESERVATION_CAPABILITIES
;
973 hostdata
->caps
.reserve
.common
.length
= sizeof(hostdata
->caps
.reserve
);
974 hostdata
->caps
.reserve
.common
.server_support
= SERVER_SUPPORTS_CAP
;
975 hostdata
->caps
.reserve
.type
= CLIENT_RESERVE_SCSI_2
;
976 req
->common
.length
= sizeof(hostdata
->caps
);
978 req
->common
.length
= sizeof(hostdata
->caps
) - sizeof(hostdata
->caps
.reserve
);
980 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
981 if (ibmvscsi_send_srp_event(evt_struct
, hostdata
, info_timeout
* 2))
982 dev_err(hostdata
->dev
, "couldn't send CAPABILITIES_REQ!\n");
983 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
987 * fast_fail_rsp: - Handle response to MAD enable fast fail
988 * @evt_struct: srp_event_struct with the response
990 * Used as a "done" callback by when sending enable fast fail. Gets called
991 * by ibmvscsi_handle_crq()
993 static void fast_fail_rsp(struct srp_event_struct
*evt_struct
)
995 struct ibmvscsi_host_data
*hostdata
= evt_struct
->hostdata
;
996 u8 status
= evt_struct
->xfer_iu
->mad
.fast_fail
.common
.status
;
998 if (status
== VIOSRP_MAD_NOT_SUPPORTED
)
999 dev_err(hostdata
->dev
, "fast_fail not supported in server\n");
1000 else if (status
== VIOSRP_MAD_FAILED
)
1001 dev_err(hostdata
->dev
, "fast_fail request failed\n");
1002 else if (status
!= VIOSRP_MAD_SUCCESS
)
1003 dev_err(hostdata
->dev
, "error 0x%X enabling fast_fail\n", status
);
1005 send_mad_capabilities(hostdata
);
1009 * init_host - Start host initialization
1010 * @hostdata: ibmvscsi_host_data of host
1012 * Returns zero if successful.
1014 static int enable_fast_fail(struct ibmvscsi_host_data
*hostdata
)
1017 unsigned long flags
;
1018 struct viosrp_fast_fail
*fast_fail_mad
;
1019 struct srp_event_struct
*evt_struct
;
1022 send_mad_capabilities(hostdata
);
1026 evt_struct
= get_event_struct(&hostdata
->pool
);
1027 BUG_ON(!evt_struct
);
1029 init_event_struct(evt_struct
, fast_fail_rsp
, VIOSRP_MAD_FORMAT
, info_timeout
);
1031 fast_fail_mad
= &evt_struct
->iu
.mad
.fast_fail
;
1032 memset(fast_fail_mad
, 0, sizeof(*fast_fail_mad
));
1033 fast_fail_mad
->common
.type
= VIOSRP_ENABLE_FAST_FAIL
;
1034 fast_fail_mad
->common
.length
= sizeof(*fast_fail_mad
);
1036 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1037 rc
= ibmvscsi_send_srp_event(evt_struct
, hostdata
, info_timeout
* 2);
1038 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1043 * adapter_info_rsp: - Handle response to MAD adapter info request
1044 * @evt_struct: srp_event_struct with the response
1046 * Used as a "done" callback by when sending adapter_info. Gets called
1047 * by ibmvscsi_handle_crq()
1049 static void adapter_info_rsp(struct srp_event_struct
*evt_struct
)
1051 struct ibmvscsi_host_data
*hostdata
= evt_struct
->hostdata
;
1053 if (evt_struct
->xfer_iu
->mad
.adapter_info
.common
.status
) {
1054 dev_err(hostdata
->dev
, "error %d getting adapter info\n",
1055 evt_struct
->xfer_iu
->mad
.adapter_info
.common
.status
);
1057 dev_info(hostdata
->dev
, "host srp version: %s, "
1058 "host partition %s (%d), OS %d, max io %u\n",
1059 hostdata
->madapter_info
.srp_version
,
1060 hostdata
->madapter_info
.partition_name
,
1061 hostdata
->madapter_info
.partition_number
,
1062 hostdata
->madapter_info
.os_type
,
1063 hostdata
->madapter_info
.port_max_txu
[0]);
1065 if (hostdata
->madapter_info
.port_max_txu
[0])
1066 hostdata
->host
->max_sectors
=
1067 hostdata
->madapter_info
.port_max_txu
[0] >> 9;
1069 if (hostdata
->madapter_info
.os_type
== 3 &&
1070 strcmp(hostdata
->madapter_info
.srp_version
, "1.6a") <= 0) {
1071 dev_err(hostdata
->dev
, "host (Ver. %s) doesn't support large transfers\n",
1072 hostdata
->madapter_info
.srp_version
);
1073 dev_err(hostdata
->dev
, "limiting scatterlists to %d\n",
1075 hostdata
->host
->sg_tablesize
= MAX_INDIRECT_BUFS
;
1078 if (hostdata
->madapter_info
.os_type
== 3) {
1079 enable_fast_fail(hostdata
);
1084 send_srp_login(hostdata
);
1088 * send_mad_adapter_info: - Sends the mad adapter info request
1089 * and stores the result so it can be retrieved with
1090 * sysfs. We COULD consider causing a failure if the
1091 * returned SRP version doesn't match ours.
1092 * @hostdata: ibmvscsi_host_data of host
1094 * Returns zero if successful.
1096 static void send_mad_adapter_info(struct ibmvscsi_host_data
*hostdata
)
1098 struct viosrp_adapter_info
*req
;
1099 struct srp_event_struct
*evt_struct
;
1100 unsigned long flags
;
1102 evt_struct
= get_event_struct(&hostdata
->pool
);
1103 BUG_ON(!evt_struct
);
1105 init_event_struct(evt_struct
,
1110 req
= &evt_struct
->iu
.mad
.adapter_info
;
1111 memset(req
, 0x00, sizeof(*req
));
1113 req
->common
.type
= VIOSRP_ADAPTER_INFO_TYPE
;
1114 req
->common
.length
= sizeof(hostdata
->madapter_info
);
1115 req
->buffer
= hostdata
->adapter_info_addr
;
1117 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1118 if (ibmvscsi_send_srp_event(evt_struct
, hostdata
, info_timeout
* 2))
1119 dev_err(hostdata
->dev
, "couldn't send ADAPTER_INFO_REQ!\n");
1120 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1124 * init_adapter: Start virtual adapter initialization sequence
1127 static void init_adapter(struct ibmvscsi_host_data
*hostdata
)
1129 send_mad_adapter_info(hostdata
);
1133 * sync_completion: Signal that a synchronous command has completed
1134 * Note that after returning from this call, the evt_struct is freed.
1135 * the caller waiting on this completion shouldn't touch the evt_struct
1138 static void sync_completion(struct srp_event_struct
*evt_struct
)
1140 /* copy the response back */
1141 if (evt_struct
->sync_srp
)
1142 *evt_struct
->sync_srp
= *evt_struct
->xfer_iu
;
1144 complete(&evt_struct
->comp
);
1148 * ibmvscsi_abort: Abort a command...from scsi host template
1149 * send this over to the server and wait synchronously for the response
1151 static int ibmvscsi_eh_abort_handler(struct scsi_cmnd
*cmd
)
1153 struct ibmvscsi_host_data
*hostdata
= shost_priv(cmd
->device
->host
);
1154 struct srp_tsk_mgmt
*tsk_mgmt
;
1155 struct srp_event_struct
*evt
;
1156 struct srp_event_struct
*tmp_evt
, *found_evt
;
1157 union viosrp_iu srp_rsp
;
1159 unsigned long flags
;
1160 u16 lun
= lun_from_dev(cmd
->device
);
1161 unsigned long wait_switch
= 0;
1163 /* First, find this command in our sent list so we can figure
1164 * out the correct tag
1166 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1167 wait_switch
= jiffies
+ (init_timeout
* HZ
);
1170 list_for_each_entry(tmp_evt
, &hostdata
->sent
, list
) {
1171 if (tmp_evt
->cmnd
== cmd
) {
1172 found_evt
= tmp_evt
;
1178 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1182 evt
= get_event_struct(&hostdata
->pool
);
1184 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1185 sdev_printk(KERN_ERR
, cmd
->device
,
1186 "failed to allocate abort event\n");
1190 init_event_struct(evt
,
1195 tsk_mgmt
= &evt
->iu
.srp
.tsk_mgmt
;
1197 /* Set up an abort SRP command */
1198 memset(tsk_mgmt
, 0x00, sizeof(*tsk_mgmt
));
1199 tsk_mgmt
->opcode
= SRP_TSK_MGMT
;
1200 tsk_mgmt
->lun
= ((u64
) lun
) << 48;
1201 tsk_mgmt
->tsk_mgmt_func
= SRP_TSK_ABORT_TASK
;
1202 tsk_mgmt
->task_tag
= (u64
) found_evt
;
1204 evt
->sync_srp
= &srp_rsp
;
1206 init_completion(&evt
->comp
);
1207 rsp_rc
= ibmvscsi_send_srp_event(evt
, hostdata
, abort_timeout
* 2);
1209 if (rsp_rc
!= SCSI_MLQUEUE_HOST_BUSY
)
1212 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1214 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1215 } while (time_before(jiffies
, wait_switch
));
1217 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1220 sdev_printk(KERN_ERR
, cmd
->device
,
1221 "failed to send abort() event. rc=%d\n", rsp_rc
);
1225 sdev_printk(KERN_INFO
, cmd
->device
,
1226 "aborting command. lun 0x%llx, tag 0x%llx\n",
1227 (((u64
) lun
) << 48), (u64
) found_evt
);
1229 wait_for_completion(&evt
->comp
);
1231 /* make sure we got a good response */
1232 if (unlikely(srp_rsp
.srp
.rsp
.opcode
!= SRP_RSP
)) {
1233 if (printk_ratelimit())
1234 sdev_printk(KERN_WARNING
, cmd
->device
, "abort bad SRP RSP type %d\n",
1235 srp_rsp
.srp
.rsp
.opcode
);
1239 if (srp_rsp
.srp
.rsp
.flags
& SRP_RSP_FLAG_RSPVALID
)
1240 rsp_rc
= *((int *)srp_rsp
.srp
.rsp
.data
);
1242 rsp_rc
= srp_rsp
.srp
.rsp
.status
;
1245 if (printk_ratelimit())
1246 sdev_printk(KERN_WARNING
, cmd
->device
,
1247 "abort code %d for task tag 0x%llx\n",
1248 rsp_rc
, tsk_mgmt
->task_tag
);
1252 /* Because we dropped the spinlock above, it's possible
1253 * The event is no longer in our list. Make sure it didn't
1254 * complete while we were aborting
1256 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1258 list_for_each_entry(tmp_evt
, &hostdata
->sent
, list
) {
1259 if (tmp_evt
->cmnd
== cmd
) {
1260 found_evt
= tmp_evt
;
1265 if (found_evt
== NULL
) {
1266 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1267 sdev_printk(KERN_INFO
, cmd
->device
, "aborted task tag 0x%llx completed\n",
1268 tsk_mgmt
->task_tag
);
1272 sdev_printk(KERN_INFO
, cmd
->device
, "successfully aborted task tag 0x%llx\n",
1273 tsk_mgmt
->task_tag
);
1275 cmd
->result
= (DID_ABORT
<< 16);
1276 list_del(&found_evt
->list
);
1277 unmap_cmd_data(&found_evt
->iu
.srp
.cmd
, found_evt
,
1278 found_evt
->hostdata
->dev
);
1279 free_event_struct(&found_evt
->hostdata
->pool
, found_evt
);
1280 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1281 atomic_inc(&hostdata
->request_limit
);
1286 * ibmvscsi_eh_device_reset_handler: Reset a single LUN...from scsi host
1287 * template send this over to the server and wait synchronously for the
1290 static int ibmvscsi_eh_device_reset_handler(struct scsi_cmnd
*cmd
)
1292 struct ibmvscsi_host_data
*hostdata
= shost_priv(cmd
->device
->host
);
1293 struct srp_tsk_mgmt
*tsk_mgmt
;
1294 struct srp_event_struct
*evt
;
1295 struct srp_event_struct
*tmp_evt
, *pos
;
1296 union viosrp_iu srp_rsp
;
1298 unsigned long flags
;
1299 u16 lun
= lun_from_dev(cmd
->device
);
1300 unsigned long wait_switch
= 0;
1302 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1303 wait_switch
= jiffies
+ (init_timeout
* HZ
);
1305 evt
= get_event_struct(&hostdata
->pool
);
1307 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1308 sdev_printk(KERN_ERR
, cmd
->device
,
1309 "failed to allocate reset event\n");
1313 init_event_struct(evt
,
1318 tsk_mgmt
= &evt
->iu
.srp
.tsk_mgmt
;
1320 /* Set up a lun reset SRP command */
1321 memset(tsk_mgmt
, 0x00, sizeof(*tsk_mgmt
));
1322 tsk_mgmt
->opcode
= SRP_TSK_MGMT
;
1323 tsk_mgmt
->lun
= ((u64
) lun
) << 48;
1324 tsk_mgmt
->tsk_mgmt_func
= SRP_TSK_LUN_RESET
;
1326 evt
->sync_srp
= &srp_rsp
;
1328 init_completion(&evt
->comp
);
1329 rsp_rc
= ibmvscsi_send_srp_event(evt
, hostdata
, reset_timeout
* 2);
1331 if (rsp_rc
!= SCSI_MLQUEUE_HOST_BUSY
)
1334 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1336 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1337 } while (time_before(jiffies
, wait_switch
));
1339 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1342 sdev_printk(KERN_ERR
, cmd
->device
,
1343 "failed to send reset event. rc=%d\n", rsp_rc
);
1347 sdev_printk(KERN_INFO
, cmd
->device
, "resetting device. lun 0x%llx\n",
1348 (((u64
) lun
) << 48));
1350 wait_for_completion(&evt
->comp
);
1352 /* make sure we got a good response */
1353 if (unlikely(srp_rsp
.srp
.rsp
.opcode
!= SRP_RSP
)) {
1354 if (printk_ratelimit())
1355 sdev_printk(KERN_WARNING
, cmd
->device
, "reset bad SRP RSP type %d\n",
1356 srp_rsp
.srp
.rsp
.opcode
);
1360 if (srp_rsp
.srp
.rsp
.flags
& SRP_RSP_FLAG_RSPVALID
)
1361 rsp_rc
= *((int *)srp_rsp
.srp
.rsp
.data
);
1363 rsp_rc
= srp_rsp
.srp
.rsp
.status
;
1366 if (printk_ratelimit())
1367 sdev_printk(KERN_WARNING
, cmd
->device
,
1368 "reset code %d for task tag 0x%llx\n",
1369 rsp_rc
, tsk_mgmt
->task_tag
);
1373 /* We need to find all commands for this LUN that have not yet been
1374 * responded to, and fail them with DID_RESET
1376 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1377 list_for_each_entry_safe(tmp_evt
, pos
, &hostdata
->sent
, list
) {
1378 if ((tmp_evt
->cmnd
) && (tmp_evt
->cmnd
->device
== cmd
->device
)) {
1380 tmp_evt
->cmnd
->result
= (DID_RESET
<< 16);
1381 list_del(&tmp_evt
->list
);
1382 unmap_cmd_data(&tmp_evt
->iu
.srp
.cmd
, tmp_evt
,
1383 tmp_evt
->hostdata
->dev
);
1384 free_event_struct(&tmp_evt
->hostdata
->pool
,
1386 atomic_inc(&hostdata
->request_limit
);
1387 if (tmp_evt
->cmnd_done
)
1388 tmp_evt
->cmnd_done(tmp_evt
->cmnd
);
1389 else if (tmp_evt
->done
)
1390 tmp_evt
->done(tmp_evt
);
1393 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1398 * ibmvscsi_eh_host_reset_handler - Reset the connection to the server
1399 * @cmd: struct scsi_cmnd having problems
1401 static int ibmvscsi_eh_host_reset_handler(struct scsi_cmnd
*cmd
)
1403 unsigned long wait_switch
= 0;
1404 struct ibmvscsi_host_data
*hostdata
= shost_priv(cmd
->device
->host
);
1406 dev_err(hostdata
->dev
, "Resetting connection due to error recovery\n");
1408 ibmvscsi_reset_host(hostdata
);
1410 for (wait_switch
= jiffies
+ (init_timeout
* HZ
);
1411 time_before(jiffies
, wait_switch
) &&
1412 atomic_read(&hostdata
->request_limit
) < 2;) {
1417 if (atomic_read(&hostdata
->request_limit
) <= 0)
1424 * ibmvscsi_handle_crq: - Handles and frees received events in the CRQ
1425 * @crq: Command/Response queue
1426 * @hostdata: ibmvscsi_host_data of host
1429 void ibmvscsi_handle_crq(struct viosrp_crq
*crq
,
1430 struct ibmvscsi_host_data
*hostdata
)
1433 unsigned long flags
;
1434 struct srp_event_struct
*evt_struct
=
1435 (struct srp_event_struct
*)crq
->IU_data_ptr
;
1436 switch (crq
->valid
) {
1437 case 0xC0: /* initialization */
1438 switch (crq
->format
) {
1439 case 0x01: /* Initialization message */
1440 dev_info(hostdata
->dev
, "partner initialized\n");
1441 /* Send back a response */
1442 if ((rc
= ibmvscsi_ops
->send_crq(hostdata
,
1443 0xC002000000000000LL
, 0)) == 0) {
1445 init_adapter(hostdata
);
1447 dev_err(hostdata
->dev
, "Unable to send init rsp. rc=%ld\n", rc
);
1451 case 0x02: /* Initialization response */
1452 dev_info(hostdata
->dev
, "partner initialization complete\n");
1455 init_adapter(hostdata
);
1458 dev_err(hostdata
->dev
, "unknown crq message type: %d\n", crq
->format
);
1461 case 0xFF: /* Hypervisor telling us the connection is closed */
1462 scsi_block_requests(hostdata
->host
);
1463 atomic_set(&hostdata
->request_limit
, 0);
1464 if (crq
->format
== 0x06) {
1465 /* We need to re-setup the interpartition connection */
1466 dev_info(hostdata
->dev
, "Re-enabling adapter!\n");
1467 hostdata
->client_migrated
= 1;
1468 hostdata
->reenable_crq
= 1;
1469 purge_requests(hostdata
, DID_REQUEUE
);
1470 wake_up(&hostdata
->work_wait_q
);
1472 dev_err(hostdata
->dev
, "Virtual adapter failed rc %d!\n",
1474 ibmvscsi_reset_host(hostdata
);
1477 case 0x80: /* real payload */
1480 dev_err(hostdata
->dev
, "got an invalid message type 0x%02x\n",
1485 /* The only kind of payload CRQs we should get are responses to
1486 * things we send. Make sure this response is to something we
1489 if (!valid_event_struct(&hostdata
->pool
, evt_struct
)) {
1490 dev_err(hostdata
->dev
, "returned correlation_token 0x%p is invalid!\n",
1491 (void *)crq
->IU_data_ptr
);
1495 if (atomic_read(&evt_struct
->free
)) {
1496 dev_err(hostdata
->dev
, "received duplicate correlation_token 0x%p!\n",
1497 (void *)crq
->IU_data_ptr
);
1501 if (crq
->format
== VIOSRP_SRP_FORMAT
)
1502 atomic_add(evt_struct
->xfer_iu
->srp
.rsp
.req_lim_delta
,
1503 &hostdata
->request_limit
);
1505 del_timer(&evt_struct
->timer
);
1507 if ((crq
->status
!= VIOSRP_OK
&& crq
->status
!= VIOSRP_OK2
) && evt_struct
->cmnd
)
1508 evt_struct
->cmnd
->result
= DID_ERROR
<< 16;
1509 if (evt_struct
->done
)
1510 evt_struct
->done(evt_struct
);
1512 dev_err(hostdata
->dev
, "returned done() is NULL; not running it!\n");
1515 * Lock the host_lock before messing with these structures, since we
1516 * are running in a task context
1518 spin_lock_irqsave(evt_struct
->hostdata
->host
->host_lock
, flags
);
1519 list_del(&evt_struct
->list
);
1520 free_event_struct(&evt_struct
->hostdata
->pool
, evt_struct
);
1521 spin_unlock_irqrestore(evt_struct
->hostdata
->host
->host_lock
, flags
);
1525 * ibmvscsi_get_host_config: Send the command to the server to get host
1526 * configuration data. The data is opaque to us.
1528 static int ibmvscsi_do_host_config(struct ibmvscsi_host_data
*hostdata
,
1529 unsigned char *buffer
, int length
)
1531 struct viosrp_host_config
*host_config
;
1532 struct srp_event_struct
*evt_struct
;
1533 unsigned long flags
;
1537 evt_struct
= get_event_struct(&hostdata
->pool
);
1539 dev_err(hostdata
->dev
, "couldn't allocate event for HOST_CONFIG!\n");
1543 init_event_struct(evt_struct
,
1548 host_config
= &evt_struct
->iu
.mad
.host_config
;
1550 /* Set up a lun reset SRP command */
1551 memset(host_config
, 0x00, sizeof(*host_config
));
1552 host_config
->common
.type
= VIOSRP_HOST_CONFIG_TYPE
;
1553 host_config
->common
.length
= length
;
1554 host_config
->buffer
= addr
= dma_map_single(hostdata
->dev
, buffer
,
1558 if (dma_mapping_error(hostdata
->dev
, host_config
->buffer
)) {
1559 if (!firmware_has_feature(FW_FEATURE_CMO
))
1560 dev_err(hostdata
->dev
,
1561 "dma_mapping error getting host config\n");
1562 free_event_struct(&hostdata
->pool
, evt_struct
);
1566 init_completion(&evt_struct
->comp
);
1567 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1568 rc
= ibmvscsi_send_srp_event(evt_struct
, hostdata
, info_timeout
* 2);
1569 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1571 wait_for_completion(&evt_struct
->comp
);
1572 dma_unmap_single(hostdata
->dev
, addr
, length
, DMA_BIDIRECTIONAL
);
1578 * ibmvscsi_slave_configure: Set the "allow_restart" flag for each disk.
1579 * @sdev: struct scsi_device device to configure
1581 * Enable allow_restart for a device if it is a disk. Adjust the
1582 * queue_depth here also as is required by the documentation for
1583 * struct scsi_host_template.
1585 static int ibmvscsi_slave_configure(struct scsi_device
*sdev
)
1587 struct Scsi_Host
*shost
= sdev
->host
;
1588 unsigned long lock_flags
= 0;
1590 spin_lock_irqsave(shost
->host_lock
, lock_flags
);
1591 if (sdev
->type
== TYPE_DISK
) {
1592 sdev
->allow_restart
= 1;
1593 blk_queue_rq_timeout(sdev
->request_queue
, 120 * HZ
);
1595 scsi_adjust_queue_depth(sdev
, 0, shost
->cmd_per_lun
);
1596 spin_unlock_irqrestore(shost
->host_lock
, lock_flags
);
1601 * ibmvscsi_change_queue_depth - Change the device's queue depth
1602 * @sdev: scsi device struct
1603 * @qdepth: depth to set
1604 * @reason: calling context
1609 static int ibmvscsi_change_queue_depth(struct scsi_device
*sdev
, int qdepth
,
1612 if (reason
!= SCSI_QDEPTH_DEFAULT
)
1615 if (qdepth
> IBMVSCSI_MAX_CMDS_PER_LUN
)
1616 qdepth
= IBMVSCSI_MAX_CMDS_PER_LUN
;
1618 scsi_adjust_queue_depth(sdev
, 0, qdepth
);
1619 return sdev
->queue_depth
;
1622 /* ------------------------------------------------------------
1625 static ssize_t
show_host_vhost_loc(struct device
*dev
,
1626 struct device_attribute
*attr
, char *buf
)
1628 struct Scsi_Host
*shost
= class_to_shost(dev
);
1629 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1632 len
= snprintf(buf
, sizeof(hostdata
->caps
.loc
), "%s\n",
1633 hostdata
->caps
.loc
);
1637 static struct device_attribute ibmvscsi_host_vhost_loc
= {
1639 .name
= "vhost_loc",
1642 .show
= show_host_vhost_loc
,
1645 static ssize_t
show_host_vhost_name(struct device
*dev
,
1646 struct device_attribute
*attr
, char *buf
)
1648 struct Scsi_Host
*shost
= class_to_shost(dev
);
1649 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1652 len
= snprintf(buf
, sizeof(hostdata
->caps
.name
), "%s\n",
1653 hostdata
->caps
.name
);
1657 static struct device_attribute ibmvscsi_host_vhost_name
= {
1659 .name
= "vhost_name",
1662 .show
= show_host_vhost_name
,
1665 static ssize_t
show_host_srp_version(struct device
*dev
,
1666 struct device_attribute
*attr
, char *buf
)
1668 struct Scsi_Host
*shost
= class_to_shost(dev
);
1669 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1672 len
= snprintf(buf
, PAGE_SIZE
, "%s\n",
1673 hostdata
->madapter_info
.srp_version
);
1677 static struct device_attribute ibmvscsi_host_srp_version
= {
1679 .name
= "srp_version",
1682 .show
= show_host_srp_version
,
1685 static ssize_t
show_host_partition_name(struct device
*dev
,
1686 struct device_attribute
*attr
,
1689 struct Scsi_Host
*shost
= class_to_shost(dev
);
1690 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1693 len
= snprintf(buf
, PAGE_SIZE
, "%s\n",
1694 hostdata
->madapter_info
.partition_name
);
1698 static struct device_attribute ibmvscsi_host_partition_name
= {
1700 .name
= "partition_name",
1703 .show
= show_host_partition_name
,
1706 static ssize_t
show_host_partition_number(struct device
*dev
,
1707 struct device_attribute
*attr
,
1710 struct Scsi_Host
*shost
= class_to_shost(dev
);
1711 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1714 len
= snprintf(buf
, PAGE_SIZE
, "%d\n",
1715 hostdata
->madapter_info
.partition_number
);
1719 static struct device_attribute ibmvscsi_host_partition_number
= {
1721 .name
= "partition_number",
1724 .show
= show_host_partition_number
,
1727 static ssize_t
show_host_mad_version(struct device
*dev
,
1728 struct device_attribute
*attr
, char *buf
)
1730 struct Scsi_Host
*shost
= class_to_shost(dev
);
1731 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1734 len
= snprintf(buf
, PAGE_SIZE
, "%d\n",
1735 hostdata
->madapter_info
.mad_version
);
1739 static struct device_attribute ibmvscsi_host_mad_version
= {
1741 .name
= "mad_version",
1744 .show
= show_host_mad_version
,
1747 static ssize_t
show_host_os_type(struct device
*dev
,
1748 struct device_attribute
*attr
, char *buf
)
1750 struct Scsi_Host
*shost
= class_to_shost(dev
);
1751 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1754 len
= snprintf(buf
, PAGE_SIZE
, "%d\n", hostdata
->madapter_info
.os_type
);
1758 static struct device_attribute ibmvscsi_host_os_type
= {
1763 .show
= show_host_os_type
,
1766 static ssize_t
show_host_config(struct device
*dev
,
1767 struct device_attribute
*attr
, char *buf
)
1769 struct Scsi_Host
*shost
= class_to_shost(dev
);
1770 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1772 /* returns null-terminated host config data */
1773 if (ibmvscsi_do_host_config(hostdata
, buf
, PAGE_SIZE
) == 0)
1779 static struct device_attribute ibmvscsi_host_config
= {
1784 .show
= show_host_config
,
1787 static struct device_attribute
*ibmvscsi_attrs
[] = {
1788 &ibmvscsi_host_vhost_loc
,
1789 &ibmvscsi_host_vhost_name
,
1790 &ibmvscsi_host_srp_version
,
1791 &ibmvscsi_host_partition_name
,
1792 &ibmvscsi_host_partition_number
,
1793 &ibmvscsi_host_mad_version
,
1794 &ibmvscsi_host_os_type
,
1795 &ibmvscsi_host_config
,
1799 /* ------------------------------------------------------------
1800 * SCSI driver registration
1802 static struct scsi_host_template driver_template
= {
1803 .module
= THIS_MODULE
,
1804 .name
= "IBM POWER Virtual SCSI Adapter " IBMVSCSI_VERSION
,
1805 .proc_name
= "ibmvscsi",
1806 .queuecommand
= ibmvscsi_queuecommand
,
1807 .eh_abort_handler
= ibmvscsi_eh_abort_handler
,
1808 .eh_device_reset_handler
= ibmvscsi_eh_device_reset_handler
,
1809 .eh_host_reset_handler
= ibmvscsi_eh_host_reset_handler
,
1810 .slave_configure
= ibmvscsi_slave_configure
,
1811 .change_queue_depth
= ibmvscsi_change_queue_depth
,
1812 .cmd_per_lun
= IBMVSCSI_CMDS_PER_LUN_DEFAULT
,
1813 .can_queue
= IBMVSCSI_MAX_REQUESTS_DEFAULT
,
1815 .sg_tablesize
= SG_ALL
,
1816 .use_clustering
= ENABLE_CLUSTERING
,
1817 .shost_attrs
= ibmvscsi_attrs
,
1821 * ibmvscsi_get_desired_dma - Calculate IO memory desired by the driver
1823 * @vdev: struct vio_dev for the device whose desired IO mem is to be returned
1826 * Number of bytes of IO data the driver will need to perform well.
1828 static unsigned long ibmvscsi_get_desired_dma(struct vio_dev
*vdev
)
1830 /* iu_storage data allocated in initialize_event_pool */
1831 unsigned long desired_io
= max_events
* sizeof(union viosrp_iu
);
1833 /* add io space for sg data */
1834 desired_io
+= (IBMVSCSI_MAX_SECTORS_DEFAULT
* 512 *
1835 IBMVSCSI_CMDS_PER_LUN_DEFAULT
);
1840 static void ibmvscsi_do_work(struct ibmvscsi_host_data
*hostdata
)
1843 char *action
= "reset";
1845 if (hostdata
->reset_crq
) {
1847 hostdata
->reset_crq
= 0;
1849 rc
= ibmvscsi_ops
->reset_crq_queue(&hostdata
->queue
, hostdata
);
1851 rc
= ibmvscsi_ops
->send_crq(hostdata
, 0xC001000000000000LL
, 0);
1852 vio_enable_interrupts(to_vio_dev(hostdata
->dev
));
1853 } else if (hostdata
->reenable_crq
) {
1856 rc
= ibmvscsi_ops
->reenable_crq_queue(&hostdata
->queue
, hostdata
);
1857 hostdata
->reenable_crq
= 0;
1859 rc
= ibmvscsi_ops
->send_crq(hostdata
, 0xC001000000000000LL
, 0);
1864 atomic_set(&hostdata
->request_limit
, -1);
1865 dev_err(hostdata
->dev
, "error after %s\n", action
);
1868 scsi_unblock_requests(hostdata
->host
);
1871 static int ibmvscsi_work_to_do(struct ibmvscsi_host_data
*hostdata
)
1873 if (kthread_should_stop())
1875 else if (hostdata
->reset_crq
) {
1878 } else if (hostdata
->reenable_crq
) {
1886 static int ibmvscsi_work(void *data
)
1888 struct ibmvscsi_host_data
*hostdata
= data
;
1891 set_user_nice(current
, -20);
1894 rc
= wait_event_interruptible(hostdata
->work_wait_q
,
1895 ibmvscsi_work_to_do(hostdata
));
1899 if (kthread_should_stop())
1902 ibmvscsi_do_work(hostdata
);
1909 * Called by bus code for each adapter
1911 static int ibmvscsi_probe(struct vio_dev
*vdev
, const struct vio_device_id
*id
)
1913 struct ibmvscsi_host_data
*hostdata
;
1914 struct Scsi_Host
*host
;
1915 struct device
*dev
= &vdev
->dev
;
1916 struct srp_rport_identifiers ids
;
1917 struct srp_rport
*rport
;
1918 unsigned long wait_switch
= 0;
1921 dev_set_drvdata(&vdev
->dev
, NULL
);
1923 host
= scsi_host_alloc(&driver_template
, sizeof(*hostdata
));
1925 dev_err(&vdev
->dev
, "couldn't allocate host data\n");
1926 goto scsi_host_alloc_failed
;
1929 host
->transportt
= ibmvscsi_transport_template
;
1930 hostdata
= shost_priv(host
);
1931 memset(hostdata
, 0x00, sizeof(*hostdata
));
1932 INIT_LIST_HEAD(&hostdata
->sent
);
1933 init_waitqueue_head(&hostdata
->work_wait_q
);
1934 hostdata
->host
= host
;
1935 hostdata
->dev
= dev
;
1936 atomic_set(&hostdata
->request_limit
, -1);
1937 hostdata
->host
->max_sectors
= IBMVSCSI_MAX_SECTORS_DEFAULT
;
1939 if (map_persist_bufs(hostdata
)) {
1940 dev_err(&vdev
->dev
, "couldn't map persistent buffers\n");
1941 goto persist_bufs_failed
;
1944 hostdata
->work_thread
= kthread_run(ibmvscsi_work
, hostdata
, "%s_%d",
1945 "ibmvscsi", host
->host_no
);
1947 if (IS_ERR(hostdata
->work_thread
)) {
1948 dev_err(&vdev
->dev
, "couldn't initialize kthread. rc=%ld\n",
1949 PTR_ERR(hostdata
->work_thread
));
1950 goto init_crq_failed
;
1953 rc
= ibmvscsi_ops
->init_crq_queue(&hostdata
->queue
, hostdata
, max_events
);
1954 if (rc
!= 0 && rc
!= H_RESOURCE
) {
1955 dev_err(&vdev
->dev
, "couldn't initialize crq. rc=%d\n", rc
);
1958 if (initialize_event_pool(&hostdata
->pool
, max_events
, hostdata
) != 0) {
1959 dev_err(&vdev
->dev
, "couldn't initialize event pool\n");
1960 goto init_pool_failed
;
1964 host
->max_id
= max_id
;
1965 host
->max_channel
= max_channel
;
1966 host
->max_cmd_len
= 16;
1968 if (scsi_add_host(hostdata
->host
, hostdata
->dev
))
1969 goto add_host_failed
;
1971 /* we don't have a proper target_port_id so let's use the fake one */
1972 memcpy(ids
.port_id
, hostdata
->madapter_info
.partition_name
,
1973 sizeof(ids
.port_id
));
1974 ids
.roles
= SRP_RPORT_ROLE_TARGET
;
1975 rport
= srp_rport_add(host
, &ids
);
1977 goto add_srp_port_failed
;
1979 /* Try to send an initialization message. Note that this is allowed
1980 * to fail if the other end is not acive. In that case we don't
1983 if (ibmvscsi_ops
->send_crq(hostdata
, 0xC001000000000000LL
, 0) == 0
1984 || rc
== H_RESOURCE
) {
1986 * Wait around max init_timeout secs for the adapter to finish
1987 * initializing. When we are done initializing, we will have a
1988 * valid request_limit. We don't want Linux scanning before
1991 for (wait_switch
= jiffies
+ (init_timeout
* HZ
);
1992 time_before(jiffies
, wait_switch
) &&
1993 atomic_read(&hostdata
->request_limit
) < 2;) {
1998 /* if we now have a valid request_limit, initiate a scan */
1999 if (atomic_read(&hostdata
->request_limit
) > 0)
2000 scsi_scan_host(host
);
2003 dev_set_drvdata(&vdev
->dev
, hostdata
);
2006 add_srp_port_failed
:
2007 scsi_remove_host(hostdata
->host
);
2009 release_event_pool(&hostdata
->pool
, hostdata
);
2011 ibmvscsi_ops
->release_crq_queue(&hostdata
->queue
, hostdata
, max_events
);
2013 kthread_stop(hostdata
->work_thread
);
2015 unmap_persist_bufs(hostdata
);
2016 persist_bufs_failed
:
2017 scsi_host_put(host
);
2018 scsi_host_alloc_failed
:
2022 static int ibmvscsi_remove(struct vio_dev
*vdev
)
2024 struct ibmvscsi_host_data
*hostdata
= dev_get_drvdata(&vdev
->dev
);
2025 unmap_persist_bufs(hostdata
);
2026 release_event_pool(&hostdata
->pool
, hostdata
);
2027 ibmvscsi_ops
->release_crq_queue(&hostdata
->queue
, hostdata
,
2030 kthread_stop(hostdata
->work_thread
);
2031 srp_remove_host(hostdata
->host
);
2032 scsi_remove_host(hostdata
->host
);
2033 scsi_host_put(hostdata
->host
);
2039 * ibmvscsi_resume: Resume from suspend
2040 * @dev: device struct
2042 * We may have lost an interrupt across suspend/resume, so kick the
2045 static int ibmvscsi_resume(struct device
*dev
)
2047 struct ibmvscsi_host_data
*hostdata
= dev_get_drvdata(dev
);
2048 return ibmvscsi_ops
->resume(hostdata
);
2052 * ibmvscsi_device_table: Used by vio.c to match devices in the device tree we
2055 static struct vio_device_id ibmvscsi_device_table
[] __devinitdata
= {
2056 {"vscsi", "IBM,v-scsi"},
2059 MODULE_DEVICE_TABLE(vio
, ibmvscsi_device_table
);
2061 static struct dev_pm_ops ibmvscsi_pm_ops
= {
2062 .resume
= ibmvscsi_resume
2065 static struct vio_driver ibmvscsi_driver
= {
2066 .id_table
= ibmvscsi_device_table
,
2067 .probe
= ibmvscsi_probe
,
2068 .remove
= ibmvscsi_remove
,
2069 .get_desired_dma
= ibmvscsi_get_desired_dma
,
2072 .owner
= THIS_MODULE
,
2073 .pm
= &ibmvscsi_pm_ops
,
2077 static struct srp_function_template ibmvscsi_transport_functions
= {
2080 int __init
ibmvscsi_module_init(void)
2084 /* Ensure we have two requests to do error recovery */
2085 driver_template
.can_queue
= max_requests
;
2086 max_events
= max_requests
+ 2;
2088 if (firmware_has_feature(FW_FEATURE_ISERIES
))
2089 ibmvscsi_ops
= &iseriesvscsi_ops
;
2090 else if (firmware_has_feature(FW_FEATURE_VIO
))
2091 ibmvscsi_ops
= &rpavscsi_ops
;
2095 ibmvscsi_transport_template
=
2096 srp_attach_transport(&ibmvscsi_transport_functions
);
2097 if (!ibmvscsi_transport_template
)
2100 ret
= vio_register_driver(&ibmvscsi_driver
);
2102 srp_release_transport(ibmvscsi_transport_template
);
2106 void __exit
ibmvscsi_module_exit(void)
2108 vio_unregister_driver(&ibmvscsi_driver
);
2109 srp_release_transport(ibmvscsi_transport_template
);
2112 module_init(ibmvscsi_module_init
);
2113 module_exit(ibmvscsi_module_exit
);