Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / mfd / omap-usb-host.c

/**
 * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI
 *
 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
 * Author: Keshava Munegowda <keshava_mgowda@ti.com>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2  of
 * the License as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
#include <linux/gpio.h>
#include <plat/usb.h>
#include <linux/pm_runtime.h>

#define USBHS_DRIVER_NAME       "usbhs-omap"
#define OMAP_EHCI_DEVICE        "ehci-omap"
#define OMAP_OHCI_DEVICE        "ohci-omap3"

/* OMAP USBHOST Register addresses  */

/* TLL Register Set */
#define OMAP_USBTLL_REVISION                            (0x00)
#define OMAP_USBTLL_SYSCONFIG                           (0x10)
#define OMAP_USBTLL_SYSCONFIG_CACTIVITY                 (1 << 8)
#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE                 (1 << 3)
#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP                 (1 << 2)
#define OMAP_USBTLL_SYSCONFIG_SOFTRESET                 (1 << 1)
#define OMAP_USBTLL_SYSCONFIG_AUTOIDLE                  (1 << 0)

#define OMAP_USBTLL_SYSSTATUS                           (0x14)
#define OMAP_USBTLL_SYSSTATUS_RESETDONE                 (1 << 0)

#define OMAP_USBTLL_IRQSTATUS                           (0x18)
#define OMAP_USBTLL_IRQENABLE                           (0x1C)

#define OMAP_TLL_SHARED_CONF                            (0x30)
#define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN             (1 << 6)
#define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN            (1 << 5)
#define OMAP_TLL_SHARED_CONF_USB_DIVRATION              (1 << 2)
#define OMAP_TLL_SHARED_CONF_FCLK_REQ                   (1 << 1)
#define OMAP_TLL_SHARED_CONF_FCLK_IS_ON                 (1 << 0)

#define OMAP_TLL_CHANNEL_CONF(num)                      (0x040 + 0x004 * num)
#define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT            24
#define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF            (1 << 11)
#define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE         (1 << 10)
#define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE              (1 << 9)
#define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE               (1 << 8)
#define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS             (1 << 1)
#define OMAP_TLL_CHANNEL_CONF_CHANEN                    (1 << 0)

#define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0              0x0
#define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM                0x1
#define OMAP_TLL_FSLSMODE_3PIN_PHY                      0x2
#define OMAP_TLL_FSLSMODE_4PIN_PHY                      0x3
#define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0              0x4
#define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM                0x5
#define OMAP_TLL_FSLSMODE_3PIN_TLL                      0x6
#define OMAP_TLL_FSLSMODE_4PIN_TLL                      0x7
#define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0              0xA
#define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM                0xB

#define OMAP_TLL_ULPI_FUNCTION_CTRL(num)                (0x804 + 0x100 * num)
#define OMAP_TLL_ULPI_INTERFACE_CTRL(num)               (0x807 + 0x100 * num)
#define OMAP_TLL_ULPI_OTG_CTRL(num)                     (0x80A + 0x100 * num)
#define OMAP_TLL_ULPI_INT_EN_RISE(num)                  (0x80D + 0x100 * num)
#define OMAP_TLL_ULPI_INT_EN_FALL(num)                  (0x810 + 0x100 * num)
#define OMAP_TLL_ULPI_INT_STATUS(num)                   (0x813 + 0x100 * num)
#define OMAP_TLL_ULPI_INT_LATCH(num)                    (0x814 + 0x100 * num)
#define OMAP_TLL_ULPI_DEBUG(num)                        (0x815 + 0x100 * num)
#define OMAP_TLL_ULPI_SCRATCH_REGISTER(num)             (0x816 + 0x100 * num)

#define OMAP_TLL_CHANNEL_COUNT                          3
#define OMAP_TLL_CHANNEL_1_EN_MASK                      (1 << 0)
#define OMAP_TLL_CHANNEL_2_EN_MASK                      (1 << 1)
#define OMAP_TLL_CHANNEL_3_EN_MASK                      (1 << 2)

/* UHH Register Set */
#define OMAP_UHH_REVISION                               (0x00)
#define OMAP_UHH_SYSCONFIG                              (0x10)
#define OMAP_UHH_SYSCONFIG_MIDLEMODE                    (1 << 12)
#define OMAP_UHH_SYSCONFIG_CACTIVITY                    (1 << 8)
#define OMAP_UHH_SYSCONFIG_SIDLEMODE                    (1 << 3)
#define OMAP_UHH_SYSCONFIG_ENAWAKEUP                    (1 << 2)
#define OMAP_UHH_SYSCONFIG_SOFTRESET                    (1 << 1)
#define OMAP_UHH_SYSCONFIG_AUTOIDLE                     (1 << 0)

#define OMAP_UHH_SYSSTATUS                              (0x14)
#define OMAP_UHH_HOSTCONFIG                             (0x40)
#define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS                 (1 << 0)
#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS              (1 << 0)
#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS              (1 << 11)
#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS              (1 << 12)
#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN              (1 << 2)
#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN              (1 << 3)
#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN             (1 << 4)
#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN              (1 << 5)
#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS           (1 << 8)
#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS           (1 << 9)
#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS           (1 << 10)
#define OMAP4_UHH_HOSTCONFIG_APP_START_CLK              (1 << 31)

/* OMAP4-specific defines */
#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR              (3 << 2)
#define OMAP4_UHH_SYSCONFIG_NOIDLE                      (1 << 2)
#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR             (3 << 4)
#define OMAP4_UHH_SYSCONFIG_NOSTDBY                     (1 << 4)
#define OMAP4_UHH_SYSCONFIG_SOFTRESET                   (1 << 0)

#define OMAP4_P1_MODE_CLEAR                             (3 << 16)
#define OMAP4_P1_MODE_TLL                               (1 << 16)
#define OMAP4_P1_MODE_HSIC                              (3 << 16)
#define OMAP4_P2_MODE_CLEAR                             (3 << 18)
#define OMAP4_P2_MODE_TLL                               (1 << 18)
#define OMAP4_P2_MODE_HSIC                              (3 << 18)

#define OMAP_REV2_TLL_CHANNEL_COUNT                     2

#define OMAP_UHH_DEBUG_CSR                              (0x44)

/* Values of UHH_REVISION - Note: these are not given in the TRM */
#define OMAP_USBHS_REV1         0x00000010      /* OMAP3 */
#define OMAP_USBHS_REV2         0x50700100      /* OMAP4 */

#define is_omap_usbhs_rev1(x)   (x->usbhs_rev == OMAP_USBHS_REV1)
#define is_omap_usbhs_rev2(x)   (x->usbhs_rev == OMAP_USBHS_REV2)

#define is_ehci_phy_mode(x)     (x == OMAP_EHCI_PORT_MODE_PHY)
#define is_ehci_tll_mode(x)     (x == OMAP_EHCI_PORT_MODE_TLL)
#define is_ehci_hsic_mode(x)    (x == OMAP_EHCI_PORT_MODE_HSIC)


struct usbhs_hcd_omap {
        struct clk                      *xclk60mhsp1_ck;
        struct clk                      *xclk60mhsp2_ck;
        struct clk                      *utmi_p1_fck;
        struct clk                      *usbhost_p1_fck;
        struct clk                      *usbtll_p1_fck;
        struct clk                      *utmi_p2_fck;
        struct clk                      *usbhost_p2_fck;
        struct clk                      *usbtll_p2_fck;
        struct clk                      *init_60m_fclk;

        void __iomem                    *uhh_base;
        void __iomem                    *tll_base;

        struct usbhs_omap_platform_data platdata;

        u32                             usbhs_rev;
        spinlock_t                      lock;
        int                             count;
};
/*-------------------------------------------------------------------------*/

const char usbhs_driver_name[] = USBHS_DRIVER_NAME;
static u64 usbhs_dmamask = ~(u32)0;

/*-------------------------------------------------------------------------*/

static inline void usbhs_write(void __iomem *base, u32 reg, u32 val)
{
        __raw_writel(val, base + reg);
}

static inline u32 usbhs_read(void __iomem *base, u32 reg)
{
        return __raw_readl(base + reg);
}

static inline void usbhs_writeb(void __iomem *base, u8 reg, u8 val)
{
        __raw_writeb(val, base + reg);
}

static inline u8 usbhs_readb(void __iomem *base, u8 reg)
{
        return __raw_readb(base + reg);
}

/*-------------------------------------------------------------------------*/

static struct platform_device *omap_usbhs_alloc_child(const char *name,
                        struct resource *res, int num_resources, void *pdata,
                        size_t pdata_size, struct device *dev)
{
        struct platform_device  *child;
        int                     ret;

        child = platform_device_alloc(name, 0);

        if (!child) {
                dev_err(dev, "platform_device_alloc %s failed\n", name);
                goto err_end;
        }

        ret = platform_device_add_resources(child, res, num_resources);
        if (ret) {
                dev_err(dev, "platform_device_add_resources failed\n");
                goto err_alloc;
        }

        ret = platform_device_add_data(child, pdata, pdata_size);
        if (ret) {
                dev_err(dev, "platform_device_add_data failed\n");
                goto err_alloc;
        }

        child->dev.dma_mask             = &usbhs_dmamask;
        child->dev.coherent_dma_mask    = 0xffffffff;
        child->dev.parent               = dev;

        ret = platform_device_add(child);
        if (ret) {
                dev_err(dev, "platform_device_add failed\n");
                goto err_alloc;
        }

        return child;

err_alloc:
        platform_device_put(child);

err_end:
        return NULL;
}

static int omap_usbhs_alloc_children(struct platform_device *pdev)
{
        struct device                           *dev = &pdev->dev;
        struct usbhs_hcd_omap                   *omap;
        struct ehci_hcd_omap_platform_data      *ehci_data;
        struct ohci_hcd_omap_platform_data      *ohci_data;
        struct platform_device                  *ehci;
        struct platform_device                  *ohci;
        struct resource                         *res;
        struct resource                         resources[2];
        int                                     ret;

        omap = platform_get_drvdata(pdev);
        ehci_data = omap->platdata.ehci_data;
        ohci_data = omap->platdata.ohci_data;

        res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci");
        if (!res) {
                dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n");
                ret = -ENODEV;
                goto err_end;
        }
        resources[0] = *res;

        res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq");
        if (!res) {
                dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n");
                ret = -ENODEV;
                goto err_end;
        }
        resources[1] = *res;

        ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, ehci_data,
                sizeof(*ehci_data), dev);

        if (!ehci) {
                dev_err(dev, "omap_usbhs_alloc_child failed\n");
                ret = -ENOMEM;
                goto err_end;
        }

        res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci");
        if (!res) {
                dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n");
                ret = -ENODEV;
                goto err_ehci;
        }
        resources[0] = *res;

        res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq");
        if (!res) {
                dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n");
                ret = -ENODEV;
                goto err_ehci;
        }
        resources[1] = *res;

        ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, ohci_data,
                sizeof(*ohci_data), dev);
        if (!ohci) {
                dev_err(dev, "omap_usbhs_alloc_child failed\n");
                ret = -ENOMEM;
                goto err_ehci;
        }

        return 0;

err_ehci:
        platform_device_unregister(ehci);

err_end:
        return ret;
}

/**
 * usbhs_omap_probe - initialize TI-based HCDs
 *
 * Allocates basic resources for this USB host controller.
 */
static int __devinit usbhs_omap_probe(struct platform_device *pdev)
{
        struct device                   *dev =  &pdev->dev;
        struct usbhs_omap_platform_data *pdata = dev->platform_data;
        struct usbhs_hcd_omap           *omap;
        struct resource                 *res;
        int                             ret = 0;
        int                             i;

        if (!pdata) {
                dev_err(dev, "Missing platform data\n");
                ret = -ENOMEM;
                goto end_probe;
        }

        omap = kzalloc(sizeof(*omap), GFP_KERNEL);
        if (!omap) {
                dev_err(dev, "Memory allocation failed\n");
                ret = -ENOMEM;
                goto end_probe;
        }

        spin_lock_init(&omap->lock);

        for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
                omap->platdata.port_mode[i] = pdata->port_mode[i];

        omap->platdata.ehci_data = pdata->ehci_data;
        omap->platdata.ohci_data = pdata->ohci_data;

        pm_runtime_enable(&pdev->dev);

        omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
        if (IS_ERR(omap->utmi_p1_fck)) {
                ret = PTR_ERR(omap->utmi_p1_fck);
                dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
                goto err_end;
        }

        omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
        if (IS_ERR(omap->xclk60mhsp1_ck)) {
                ret = PTR_ERR(omap->xclk60mhsp1_ck);
                dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
                goto err_utmi_p1_fck;
        }

        omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
        if (IS_ERR(omap->utmi_p2_fck)) {
                ret = PTR_ERR(omap->utmi_p2_fck);
                dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
                goto err_xclk60mhsp1_ck;
        }

        omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
        if (IS_ERR(omap->xclk60mhsp2_ck)) {
                ret = PTR_ERR(omap->xclk60mhsp2_ck);
                dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
                goto err_utmi_p2_fck;
        }

        omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
        if (IS_ERR(omap->usbhost_p1_fck)) {
                ret = PTR_ERR(omap->usbhost_p1_fck);
                dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
                goto err_xclk60mhsp2_ck;
        }

        omap->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk");
        if (IS_ERR(omap->usbtll_p1_fck)) {
                ret = PTR_ERR(omap->usbtll_p1_fck);
                dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret);
                goto err_usbhost_p1_fck;
        }

        omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
        if (IS_ERR(omap->usbhost_p2_fck)) {
                ret = PTR_ERR(omap->usbhost_p2_fck);
                dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
                goto err_usbtll_p1_fck;
        }

        omap->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk");
        if (IS_ERR(omap->usbtll_p2_fck)) {
                ret = PTR_ERR(omap->usbtll_p2_fck);
                dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret);
                goto err_usbhost_p2_fck;
        }

        omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
        if (IS_ERR(omap->init_60m_fclk)) {
                ret = PTR_ERR(omap->init_60m_fclk);
                dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
                goto err_usbtll_p2_fck;
        }

        res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
        if (!res) {
                dev_err(dev, "UHH EHCI get resource failed\n");
                ret = -ENODEV;
                goto err_init_60m_fclk;
        }

        omap->uhh_base = ioremap(res->start, resource_size(res));
        if (!omap->uhh_base) {
                dev_err(dev, "UHH ioremap failed\n");
                ret = -ENOMEM;
                goto err_init_60m_fclk;
        }

        res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll");
        if (!res) {
                dev_err(dev, "UHH EHCI get resource failed\n");
                ret = -ENODEV;
                goto err_tll;
        }

        omap->tll_base = ioremap(res->start, resource_size(res));
        if (!omap->tll_base) {
                dev_err(dev, "TLL ioremap failed\n");
                ret = -ENOMEM;
                goto err_tll;
        }

        platform_set_drvdata(pdev, omap);

        ret = omap_usbhs_alloc_children(pdev);
        if (ret) {
                dev_err(dev, "omap_usbhs_alloc_children failed\n");
                goto err_alloc;
        }

        goto end_probe;

err_alloc:
        iounmap(omap->tll_base);

err_tll:
        iounmap(omap->uhh_base);

err_init_60m_fclk:
        clk_put(omap->init_60m_fclk);

err_usbtll_p2_fck:
        clk_put(omap->usbtll_p2_fck);

err_usbhost_p2_fck:
        clk_put(omap->usbhost_p2_fck);

err_usbtll_p1_fck:
        clk_put(omap->usbtll_p1_fck);

err_usbhost_p1_fck:
        clk_put(omap->usbhost_p1_fck);

err_xclk60mhsp2_ck:
        clk_put(omap->xclk60mhsp2_ck);

err_utmi_p2_fck:
        clk_put(omap->utmi_p2_fck);

err_xclk60mhsp1_ck:
        clk_put(omap->xclk60mhsp1_ck);

err_utmi_p1_fck:
        clk_put(omap->utmi_p1_fck);

err_end:
        pm_runtime_disable(&pdev->dev);
        kfree(omap);

end_probe:
        return ret;
}

/**
 * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
 * @pdev: USB Host Controller being removed
 *
 * Reverses the effect of usbhs_omap_probe().
 */
static int __devexit usbhs_omap_remove(struct platform_device *pdev)
{
        struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);

        if (omap->count != 0) {
                dev_err(&pdev->dev,
                        "Either EHCI or OHCI is still using usbhs core\n");
                return -EBUSY;
        }

        iounmap(omap->tll_base);
        iounmap(omap->uhh_base);
        clk_put(omap->init_60m_fclk);
        clk_put(omap->usbtll_p2_fck);
        clk_put(omap->usbhost_p2_fck);
        clk_put(omap->usbtll_p1_fck);
        clk_put(omap->usbhost_p1_fck);
        clk_put(omap->xclk60mhsp2_ck);
        clk_put(omap->utmi_p2_fck);
        clk_put(omap->xclk60mhsp1_ck);
        clk_put(omap->utmi_p1_fck);
        pm_runtime_disable(&pdev->dev);
        kfree(omap);

        return 0;
}

static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
{
        switch (pmode) {
        case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
        case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
        case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
        case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
        case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
        case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
        case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
        case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
        case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
        case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
                return true;

        default:
                return false;
        }
}

/*
 * convert the port-mode enum to a value we can use in the FSLSMODE
 * field of USBTLL_CHANNEL_CONF
 */
static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode)
{
        switch (mode) {
        case OMAP_USBHS_PORT_MODE_UNUSED:
        case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
                return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;

        case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
                return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM;

        case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
                return OMAP_TLL_FSLSMODE_3PIN_PHY;

        case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
                return OMAP_TLL_FSLSMODE_4PIN_PHY;

        case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
                return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0;

        case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
                return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM;

        case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
                return OMAP_TLL_FSLSMODE_3PIN_TLL;

        case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
                return OMAP_TLL_FSLSMODE_4PIN_TLL;

        case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
                return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0;

        case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
                return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM;
        default:
                pr_warning("Invalid port mode, using default\n");
                return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
        }
}

static void usbhs_omap_tll_init(struct device *dev, u8 tll_channel_count)
{
        struct usbhs_hcd_omap           *omap = dev_get_drvdata(dev);
        struct usbhs_omap_platform_data *pdata = dev->platform_data;
        unsigned                        reg;
        int                             i;

        /* Program Common TLL register */
        reg = usbhs_read(omap->tll_base, OMAP_TLL_SHARED_CONF);
        reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON
                | OMAP_TLL_SHARED_CONF_USB_DIVRATION);
        reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN;
        reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN;

        usbhs_write(omap->tll_base, OMAP_TLL_SHARED_CONF, reg);

        /* Enable channels now */
        for (i = 0; i < tll_channel_count; i++) {
                reg = usbhs_read(omap->tll_base,
                                OMAP_TLL_CHANNEL_CONF(i));

                if (is_ohci_port(pdata->port_mode[i])) {
                        reg |= ohci_omap3_fslsmode(pdata->port_mode[i])
                                << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT;
                        reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS;
                } else if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_TLL) {

                        /* Disable AutoIdle, BitStuffing and use SDR Mode */
                        reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
                                | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
                                | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);

                        reg |= (1 << (i + 1));
                } else
                        continue;

                reg |= OMAP_TLL_CHANNEL_CONF_CHANEN;
                usbhs_write(omap->tll_base,
                                OMAP_TLL_CHANNEL_CONF(i), reg);

                usbhs_writeb(omap->tll_base,
                                OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 0xbe);
        }
}

static int usbhs_enable(struct device *dev)
{
        struct usbhs_hcd_omap           *omap = dev_get_drvdata(dev);
        struct usbhs_omap_platform_data *pdata = &omap->platdata;
        unsigned long                   flags = 0;
        int                             ret = 0;
        unsigned                        reg;

        dev_dbg(dev, "starting TI HSUSB Controller\n");
        if (!pdata) {
                dev_dbg(dev, "missing platform_data\n");
                return  -ENODEV;
        }

        spin_lock_irqsave(&omap->lock, flags);
        if (omap->count > 0)
                goto end_count;

        pm_runtime_get_sync(dev);

        if (pdata->ehci_data->phy_reset) {
                if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) {
                        gpio_request(pdata->ehci_data->reset_gpio_port[0],
                                                "USB1 PHY reset");
                        gpio_direction_output
                                (pdata->ehci_data->reset_gpio_port[0], 0);
                }

                if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) {
                        gpio_request(pdata->ehci_data->reset_gpio_port[1],
                                                "USB2 PHY reset");
                        gpio_direction_output
                                (pdata->ehci_data->reset_gpio_port[1], 0);
                }

                /* Hold the PHY in RESET for enough time till DIR is high */
                udelay(10);
        }

        omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
        dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);

        reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
        /* setup ULPI bypass and burst configurations */
        reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
                        | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
                        | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
        reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK;
        reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;

        if (is_omap_usbhs_rev1(omap)) {
                if (pdata->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED)
                        reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
                if (pdata->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED)
                        reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
                if (pdata->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED)
                        reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;

                /* Bypass the TLL module for PHY mode operation */
                if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
                        dev_dbg(dev, "OMAP3 ES version <= ES2.1\n");
                        if (is_ehci_phy_mode(pdata->port_mode[0]) ||
                                is_ehci_phy_mode(pdata->port_mode[1]) ||
                                        is_ehci_phy_mode(pdata->port_mode[2]))
                                reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
                        else
                                reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
                } else {
                        dev_dbg(dev, "OMAP3 ES version > ES2.1\n");
                        if (is_ehci_phy_mode(pdata->port_mode[0]))
                                reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
                        else
                                reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
                        if (is_ehci_phy_mode(pdata->port_mode[1]))
                                reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
                        else
                                reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
                        if (is_ehci_phy_mode(pdata->port_mode[2]))
                                reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
                        else
                                reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
                }
        } else if (is_omap_usbhs_rev2(omap)) {
                /* Clear port mode fields for PHY mode*/
                reg &= ~OMAP4_P1_MODE_CLEAR;
                reg &= ~OMAP4_P2_MODE_CLEAR;

                if (is_ehci_phy_mode(pdata->port_mode[0])) {
                        ret = clk_set_parent(omap->utmi_p1_fck,
                                                omap->xclk60mhsp1_ck);
                        if (ret != 0) {
                                dev_err(dev, "xclk60mhsp1_ck set parent"
                                "failed error:%d\n", ret);
                                goto err_tll;
                        }
                } else if (is_ehci_tll_mode(pdata->port_mode[0])) {
                        ret = clk_set_parent(omap->utmi_p1_fck,
                                                omap->init_60m_fclk);
                        if (ret != 0) {
                                dev_err(dev, "init_60m_fclk set parent"
                                "failed error:%d\n", ret);
                                goto err_tll;
                        }
                        clk_enable(omap->usbhost_p1_fck);
                        clk_enable(omap->usbtll_p1_fck);
                }

                if (is_ehci_phy_mode(pdata->port_mode[1])) {
                        ret = clk_set_parent(omap->utmi_p2_fck,
                                                omap->xclk60mhsp2_ck);
                        if (ret != 0) {
                                dev_err(dev, "xclk60mhsp1_ck set parent"
                                        "failed error:%d\n", ret);
                                goto err_tll;
                        }
                } else if (is_ehci_tll_mode(pdata->port_mode[1])) {
                        ret = clk_set_parent(omap->utmi_p2_fck,
                                                omap->init_60m_fclk);
                        if (ret != 0) {
                                dev_err(dev, "init_60m_fclk set parent"
                                "failed error:%d\n", ret);
                                goto err_tll;
                        }
                        clk_enable(omap->usbhost_p2_fck);
                        clk_enable(omap->usbtll_p2_fck);
                }

                clk_enable(omap->utmi_p1_fck);
                clk_enable(omap->utmi_p2_fck);

                if (is_ehci_tll_mode(pdata->port_mode[0]) ||
                        (is_ohci_port(pdata->port_mode[0])))
                        reg |= OMAP4_P1_MODE_TLL;
                else if (is_ehci_hsic_mode(pdata->port_mode[0]))
                        reg |= OMAP4_P1_MODE_HSIC;

                if (is_ehci_tll_mode(pdata->port_mode[1]) ||
                        (is_ohci_port(pdata->port_mode[1])))
                        reg |= OMAP4_P2_MODE_TLL;
                else if (is_ehci_hsic_mode(pdata->port_mode[1]))
                        reg |= OMAP4_P2_MODE_HSIC;
        }

        usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
        dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);

        if (is_ehci_tll_mode(pdata->port_mode[0]) ||
                is_ehci_tll_mode(pdata->port_mode[1]) ||
                is_ehci_tll_mode(pdata->port_mode[2]) ||
                (is_ohci_port(pdata->port_mode[0])) ||
                (is_ohci_port(pdata->port_mode[1])) ||
                (is_ohci_port(pdata->port_mode[2]))) {

                /* Enable UTMI mode for required TLL channels */
                if (is_omap_usbhs_rev2(omap))
                        usbhs_omap_tll_init(dev, OMAP_REV2_TLL_CHANNEL_COUNT);
                else
                        usbhs_omap_tll_init(dev, OMAP_TLL_CHANNEL_COUNT);
        }

        if (pdata->ehci_data->phy_reset) {
                /* Hold the PHY in RESET for enough time till
                 * PHY is settled and ready
                 */
                udelay(10);

                if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
                        gpio_set_value
                                (pdata->ehci_data->reset_gpio_port[0], 1);

                if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
                        gpio_set_value
                                (pdata->ehci_data->reset_gpio_port[1], 1);
        }

end_count:
        omap->count++;
        spin_unlock_irqrestore(&omap->lock, flags);
        return 0;

err_tll:
        pm_runtime_put_sync(dev);
        spin_unlock_irqrestore(&omap->lock, flags);
        if (pdata->ehci_data->phy_reset) {
                if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
                        gpio_free(pdata->ehci_data->reset_gpio_port[0]);

                if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
                        gpio_free(pdata->ehci_data->reset_gpio_port[1]);
        }
        return ret;
}

static void usbhs_disable(struct device *dev)
{
        struct usbhs_hcd_omap           *omap = dev_get_drvdata(dev);
        struct usbhs_omap_platform_data *pdata = &omap->platdata;
        unsigned long                   flags = 0;
        unsigned long                   timeout;

        dev_dbg(dev, "stopping TI HSUSB Controller\n");

        spin_lock_irqsave(&omap->lock, flags);

        if (omap->count == 0)
                goto end_disble;

        omap->count--;

        if (omap->count != 0)
                goto end_disble;

        /* Reset OMAP modules for insmod/rmmod to work */
        usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG,
                        is_omap_usbhs_rev2(omap) ?
                        OMAP4_UHH_SYSCONFIG_SOFTRESET :
                        OMAP_UHH_SYSCONFIG_SOFTRESET);

        timeout = jiffies + msecs_to_jiffies(100);
        while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
                                & (1 << 0))) {
                cpu_relax();

                if (time_after(jiffies, timeout))
                        dev_dbg(dev, "operation timed out\n");
        }

        while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
                                & (1 << 1))) {
                cpu_relax();

                if (time_after(jiffies, timeout))
                        dev_dbg(dev, "operation timed out\n");
        }

        while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
                                & (1 << 2))) {
                cpu_relax();

                if (time_after(jiffies, timeout))
                        dev_dbg(dev, "operation timed out\n");
        }

        usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1));

        while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
                                & (1 << 0))) {
                cpu_relax();

                if (time_after(jiffies, timeout))
                        dev_dbg(dev, "operation timed out\n");
        }

        if (is_omap_usbhs_rev2(omap)) {
                if (is_ehci_tll_mode(pdata->port_mode[0]))
                        clk_enable(omap->usbtll_p1_fck);
                if (is_ehci_tll_mode(pdata->port_mode[1]))
                        clk_enable(omap->usbtll_p2_fck);
                clk_disable(omap->utmi_p2_fck);
                clk_disable(omap->utmi_p1_fck);
        }

        pm_runtime_put_sync(dev);

        /* The gpio_free migh sleep; so unlock the spinlock */
        spin_unlock_irqrestore(&omap->lock, flags);

        if (pdata->ehci_data->phy_reset) {
                if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
                        gpio_free(pdata->ehci_data->reset_gpio_port[0]);

                if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
                        gpio_free(pdata->ehci_data->reset_gpio_port[1]);
        }
        return;

end_disble:
        spin_unlock_irqrestore(&omap->lock, flags);
}

int omap_usbhs_enable(struct device *dev)
{
        return  usbhs_enable(dev->parent);
}
EXPORT_SYMBOL_GPL(omap_usbhs_enable);

void omap_usbhs_disable(struct device *dev)
{
        usbhs_disable(dev->parent);
}
EXPORT_SYMBOL_GPL(omap_usbhs_disable);

static struct platform_driver usbhs_omap_driver = {
        .driver = {
                .name           = (char *)usbhs_driver_name,
                .owner          = THIS_MODULE,
        },
        .remove         = __exit_p(usbhs_omap_remove),
};

MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI");

static int __init omap_usbhs_drvinit(void)
{
        return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe);
}

/*
 * init before ehci and ohci drivers;
 * The usbhs core driver should be initialized much before
 * the omap ehci and ohci probe functions are called.
 */
fs_initcall(omap_usbhs_drvinit);

static void __exit omap_usbhs_drvexit(void)
{
        platform_driver_unregister(&usbhs_omap_driver);
}
module_exit(omap_usbhs_drvexit);