1 /******************************************************************************
3 * This file is provided under a dual BSD/GPLv2 license. When using or
4 * redistributing this file, you may do so under either license.
8 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of version 2 of the GNU General Public License as
12 * published by the Free Software Foundation.
14 * This program is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
17 * General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
24 * The full GNU General Public License is included in this distribution
25 * in the file called LICENSE.GPL.
27 * Contact Information:
28 * Intel Linux Wireless <ilw@linux.intel.com>
29 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
33 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
34 * All rights reserved.
36 * Redistribution and use in source and binary forms, with or without
37 * modification, are permitted provided that the following conditions
40 * * Redistributions of source code must retain the above copyright
41 * notice, this list of conditions and the following disclaimer.
42 * * Redistributions in binary form must reproduce the above copyright
43 * notice, this list of conditions and the following disclaimer in
44 * the documentation and/or other materials provided with the
46 * * Neither the name Intel Corporation nor the names of its
47 * contributors may be used to endorse or promote products derived
48 * from this software without specific prior written permission.
50 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
51 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
52 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
53 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
54 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
55 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
56 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
57 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
58 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
59 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
60 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
61 *****************************************************************************/
63 #ifndef __iwl_core_h__
64 #define __iwl_core_h__
68 /************************
69 * forward declarations *
70 ************************/
74 #define TIME_UNIT 1024
76 #define IWL_CMD(x) case x: return #x
79 /* set hw dependent parameters */
80 int (*set_hw_params
)(struct iwl_priv
*priv
);
81 /* setup BT Rx handler */
82 void (*bt_rx_handler_setup
)(struct iwl_priv
*priv
);
83 /* setup BT related deferred work */
84 void (*bt_setup_deferred_work
)(struct iwl_priv
*priv
);
85 /* cancel deferred work */
86 void (*cancel_deferred_work
)(struct iwl_priv
*priv
);
87 int (*set_channel_switch
)(struct iwl_priv
*priv
,
88 struct ieee80211_channel_switch
*ch_switch
);
89 /* device specific configuration */
90 void (*nic_config
)(struct iwl_priv
*priv
);
92 /* eeprom operations (as defined in iwl-eeprom.h) */
93 struct iwl_eeprom_ops eeprom_ops
;
96 void (*temperature
)(struct iwl_priv
*priv
);
100 * @max_ll_items: max number of OTP blocks
101 * @shadow_ram_support: shadow support for OTP memory
102 * @led_compensation: compensate on the led on/off time per HW according
103 * to the deviation to achieve the desired led frequency.
104 * The detail algorithm is described in iwl-led.c
105 * @chain_noise_num_beacons: number of beacons used to compute chain noise
106 * @adv_thermal_throttle: support advance thermal throttle
107 * @support_ct_kill_exit: support ct kill exit condition
108 * @support_wimax_coexist: support wimax/wifi co-exist
109 * @plcp_delta_threshold: plcp error rate threshold used to trigger
110 * radio tuning when there is a high receiving plcp error rate
111 * @chain_noise_scale: default chain noise scale used for gain computation
112 * @wd_timeout: TX queues watchdog timeout
113 * @temperature_kelvin: temperature report by uCode in kelvin
114 * @max_event_log_size: size of event log buffer size for ucode event logging
115 * @shadow_reg_enable: HW shadhow register bit
116 * @no_idle_support: do not support idle mode
117 * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up
119 struct iwl_base_params
{
121 int num_of_queues
; /* def: HW dependent */
122 int num_of_ampdu_queues
;/* def: HW dependent */
123 /* for iwl_apm_init() */
126 const u16 max_ll_items
;
127 const bool shadow_ram_support
;
128 u16 led_compensation
;
129 int chain_noise_num_beacons
;
130 bool adv_thermal_throttle
;
131 bool support_ct_kill_exit
;
132 const bool support_wimax_coexist
;
133 u8 plcp_delta_threshold
;
134 s32 chain_noise_scale
;
135 unsigned int wd_timeout
;
136 bool temperature_kelvin
;
137 u32 max_event_log_size
;
138 const bool shadow_reg_enable
;
139 const bool no_idle_support
;
143 * @advanced_bt_coexist: support advanced bt coexist
144 * @bt_init_traffic_load: specify initial bt traffic load
145 * @bt_prio_boost: default bt priority boost value
146 * @agg_time_limit: maximum number of uSec in aggregation
147 * @ampdu_factor: Maximum A-MPDU length factor
148 * @ampdu_density: Minimum A-MPDU spacing
149 * @bt_sco_disable: uCode should not response to BT in SCO/ESCO mode
151 struct iwl_bt_params
{
152 bool advanced_bt_coexist
;
153 u8 bt_init_traffic_load
;
162 * @use_rts_for_aggregation: use rts/cts protection for HT traffic
164 struct iwl_ht_params
{
165 const bool ht_greenfield_support
; /* if used set to true */
166 bool use_rts_for_aggregation
;
167 enum ieee80211_smps_mode smps_mode
;
172 * @name: Offical name of the device
173 * @fw_name_pre: Firmware filename prefix. The api version and extension
174 * (.ucode) will be added to filename before loading from disk. The
175 * filename is constructed as fw_name_pre<api>.ucode.
176 * @ucode_api_max: Highest version of uCode API supported by driver.
177 * @ucode_api_ok: oldest version of the uCode API that is OK to load
178 * without a warning, for use in transitions
179 * @ucode_api_min: Lowest version of uCode API supported by driver.
180 * @valid_tx_ant: valid transmit antenna
181 * @valid_rx_ant: valid receive antenna
182 * @sku: sku information from EEPROM
183 * @eeprom_ver: EEPROM version
184 * @eeprom_calib_ver: EEPROM calibration version
185 * @lib: pointer to the lib ops
186 * @additional_nic_config: additional nic configuration
187 * @base_params: pointer to basic parameters
188 * @ht_params: point to ht patameters
189 * @bt_params: pointer to bt parameters
190 * @pa_type: used by 6000 series only to identify the type of Power Amplifier
191 * @need_dc_calib: need to perform init dc calibration
192 * @need_temp_offset_calib: need to perform temperature offset calibration
193 * @scan_antennas: available antenna for scan operation
194 * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
195 * @adv_pm: advance power management
196 * @rx_with_siso_diversity: 1x1 device with rx antenna diversity
197 * @internal_wimax_coex: internal wifi/wimax combo device
198 * @iq_invert: I/Q inversion
200 * We enable the driver to be backward compatible wrt API version. The
201 * driver specifies which APIs it supports (with @ucode_api_max being the
202 * highest and @ucode_api_min the lowest). Firmware will only be loaded if
203 * it has a supported API version.
205 * The ideal usage of this infrastructure is to treat a new ucode API
206 * release as a new hardware revision.
209 /* params specific to an individual device within a device family */
211 const char *fw_name_pre
;
212 const unsigned int ucode_api_max
;
213 const unsigned int ucode_api_ok
;
214 const unsigned int ucode_api_min
;
219 u16 eeprom_calib_ver
;
220 const struct iwl_lib_ops
*lib
;
221 void (*additional_nic_config
)(struct iwl_priv
*priv
);
222 /* params not likely to change within a device family */
223 struct iwl_base_params
*base_params
;
224 /* params likely to change within a device family */
225 struct iwl_ht_params
*ht_params
;
226 struct iwl_bt_params
*bt_params
;
227 enum iwl_pa_type pa_type
; /* if used set to IWL_PA_SYSTEM */
228 const bool need_dc_calib
; /* if used set to true */
229 const bool need_temp_offset_calib
; /* if used set to true */
230 u8 scan_rx_antennas
[IEEE80211_NUM_BANDS
];
231 enum iwl_led_mode led_mode
;
233 const bool rx_with_siso_diversity
;
234 const bool internal_wimax_coex
;
235 const bool iq_invert
;
238 /***************************
240 ***************************/
242 int iwl_mac_conf_tx(struct ieee80211_hw
*hw
, u16 queue
,
243 const struct ieee80211_tx_queue_params
*params
);
244 int iwl_mac_tx_last_beacon(struct ieee80211_hw
*hw
);
245 void iwl_set_rxon_hwcrypto(struct iwl_priv
*priv
, struct iwl_rxon_context
*ctx
,
247 int iwl_check_rxon_cmd(struct iwl_priv
*priv
, struct iwl_rxon_context
*ctx
);
248 int iwl_full_rxon_required(struct iwl_priv
*priv
, struct iwl_rxon_context
*ctx
);
249 int iwl_set_rxon_channel(struct iwl_priv
*priv
, struct ieee80211_channel
*ch
,
250 struct iwl_rxon_context
*ctx
);
251 void iwl_set_flags_for_band(struct iwl_priv
*priv
,
252 struct iwl_rxon_context
*ctx
,
253 enum ieee80211_band band
,
254 struct ieee80211_vif
*vif
);
255 u8
iwl_get_single_channel_number(struct iwl_priv
*priv
,
256 enum ieee80211_band band
);
257 void iwl_set_rxon_ht(struct iwl_priv
*priv
, struct iwl_ht_config
*ht_conf
);
258 bool iwl_is_ht40_tx_allowed(struct iwl_priv
*priv
,
259 struct iwl_rxon_context
*ctx
,
260 struct ieee80211_sta_ht_cap
*ht_cap
);
261 void iwl_connection_init_rx_config(struct iwl_priv
*priv
,
262 struct iwl_rxon_context
*ctx
);
263 void iwl_set_rate(struct iwl_priv
*priv
);
264 int iwl_mac_add_interface(struct ieee80211_hw
*hw
,
265 struct ieee80211_vif
*vif
);
266 void iwl_mac_remove_interface(struct ieee80211_hw
*hw
,
267 struct ieee80211_vif
*vif
);
268 int iwl_mac_change_interface(struct ieee80211_hw
*hw
,
269 struct ieee80211_vif
*vif
,
270 enum nl80211_iftype newtype
, bool newp2p
);
271 #ifdef CONFIG_IWLWIFI_DEBUGFS
272 int iwl_alloc_traffic_mem(struct iwl_priv
*priv
);
273 void iwl_free_traffic_mem(struct iwl_priv
*priv
);
274 void iwl_reset_traffic_log(struct iwl_priv
*priv
);
275 void iwl_dbg_log_tx_data_frame(struct iwl_priv
*priv
,
276 u16 length
, struct ieee80211_hdr
*header
);
277 void iwl_dbg_log_rx_data_frame(struct iwl_priv
*priv
,
278 u16 length
, struct ieee80211_hdr
*header
);
279 const char *get_mgmt_string(int cmd
);
280 const char *get_ctrl_string(int cmd
);
281 void iwl_clear_traffic_stats(struct iwl_priv
*priv
);
282 void iwl_update_stats(struct iwl_priv
*priv
, bool is_tx
, __le16 fc
,
285 static inline int iwl_alloc_traffic_mem(struct iwl_priv
*priv
)
289 static inline void iwl_free_traffic_mem(struct iwl_priv
*priv
)
292 static inline void iwl_reset_traffic_log(struct iwl_priv
*priv
)
295 static inline void iwl_dbg_log_tx_data_frame(struct iwl_priv
*priv
,
296 u16 length
, struct ieee80211_hdr
*header
)
299 static inline void iwl_dbg_log_rx_data_frame(struct iwl_priv
*priv
,
300 u16 length
, struct ieee80211_hdr
*header
)
303 static inline void iwl_update_stats(struct iwl_priv
*priv
, bool is_tx
,
309 /*****************************************************
311 ******************************************************/
312 void iwl_chswitch_done(struct iwl_priv
*priv
, bool is_success
);
314 void iwl_setup_watchdog(struct iwl_priv
*priv
);
315 /*****************************************************
317 ****************************************************/
318 int iwl_set_tx_power(struct iwl_priv
*priv
, s8 tx_power
, bool force
);
320 /*******************************************************************************
322 ******************************************************************************/
323 void iwl_init_scan_params(struct iwl_priv
*priv
);
324 int iwl_scan_cancel(struct iwl_priv
*priv
);
325 int iwl_scan_cancel_timeout(struct iwl_priv
*priv
, unsigned long ms
);
326 void iwl_force_scan_end(struct iwl_priv
*priv
);
327 int iwl_mac_hw_scan(struct ieee80211_hw
*hw
,
328 struct ieee80211_vif
*vif
,
329 struct cfg80211_scan_request
*req
);
330 void iwl_internal_short_hw_scan(struct iwl_priv
*priv
);
331 int iwl_force_reset(struct iwl_priv
*priv
, int mode
, bool external
);
332 u16
iwl_fill_probe_req(struct iwl_priv
*priv
, struct ieee80211_mgmt
*frame
,
333 const u8
*ta
, const u8
*ie
, int ie_len
, int left
);
334 void iwl_setup_rx_scan_handlers(struct iwl_priv
*priv
);
335 u16
iwl_get_active_dwell_time(struct iwl_priv
*priv
,
336 enum ieee80211_band band
,
338 u16
iwl_get_passive_dwell_time(struct iwl_priv
*priv
,
339 enum ieee80211_band band
,
340 struct ieee80211_vif
*vif
);
341 void iwl_setup_scan_deferred_work(struct iwl_priv
*priv
);
342 void iwl_cancel_scan_deferred_work(struct iwl_priv
*priv
);
343 int __must_check
iwl_scan_initiate(struct iwl_priv
*priv
,
344 struct ieee80211_vif
*vif
,
345 enum iwl_scan_type scan_type
,
346 enum ieee80211_band band
);
348 /* For faster active scanning, scan will move to the next channel if fewer than
349 * PLCP_QUIET_THRESH packets are heard on this channel within
350 * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell
351 * time if it's a quiet channel (nothing responded to our probe, and there's
353 * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
354 #define IWL_ACTIVE_QUIET_TIME cpu_to_le16(10) /* msec */
355 #define IWL_PLCP_QUIET_THRESH cpu_to_le16(1) /* packets */
357 #define IWL_SCAN_CHECK_WATCHDOG (HZ * 7)
359 /*****************************************************
360 * S e n d i n g H o s t C o m m a n d s *
361 *****************************************************/
363 const char *get_cmd_string(u8 cmd
);
364 void iwl_bg_watchdog(unsigned long data
);
365 u32
iwl_usecs_to_beacons(struct iwl_priv
*priv
, u32 usec
, u32 beacon_interval
);
366 __le32
iwl_add_beacon_time(struct iwl_priv
*priv
, u32 base
,
367 u32 addon
, u32 beacon_interval
);
370 /*****************************************************
371 * Error Handling Debugging
372 ******************************************************/
373 #ifdef CONFIG_IWLWIFI_DEBUG
374 void iwl_print_rx_config_cmd(struct iwl_priv
*priv
,
375 struct iwl_rxon_context
*ctx
);
377 static inline void iwl_print_rx_config_cmd(struct iwl_priv
*priv
,
378 struct iwl_rxon_context
*ctx
)
383 /*****************************************************
385 ******************************************************/
386 int iwl_init_geos(struct iwl_priv
*priv
);
387 void iwl_free_geos(struct iwl_priv
*priv
);
389 extern void iwl_send_bt_config(struct iwl_priv
*priv
);
390 extern int iwl_send_statistics_request(struct iwl_priv
*priv
,
391 u8 flags
, bool clear
);
392 void iwl_apm_stop(struct iwl_priv
*priv
);
393 int iwl_apm_init(struct iwl_priv
*priv
);
395 int iwl_send_rxon_timing(struct iwl_priv
*priv
, struct iwl_rxon_context
*ctx
);
397 static inline const struct ieee80211_supported_band
*iwl_get_hw_mode(
398 struct iwl_priv
*priv
, enum ieee80211_band band
)
400 return priv
->hw
->wiphy
->bands
[band
];
403 static inline bool iwl_advanced_bt_coexist(struct iwl_priv
*priv
)
405 return priv
->cfg
->bt_params
&&
406 priv
->cfg
->bt_params
->advanced_bt_coexist
;
409 extern bool bt_siso_mode
;
412 void iwlagn_fw_error(struct iwl_priv
*priv
, bool ondemand
);
414 #endif /* __iwl_core_h__ */