[ARM] Kirkwood: add LaCie 5Big Network v2 support
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / arm / ks8695net.h
blob80eff6ea51631a88097f86a0e71413e9e8ff012d
1 /*
2 * Micrel KS8695 (Centaur) Ethernet.
4 * Copyright 2008 Simtec Electronics
5 * Daniel Silverstone <dsilvers@simtec.co.uk>
6 * Vincent Sanders <vince@simtec.co.uk>
7 */
9 #ifndef KS8695NET_H
10 #define KS8695NET_H
12 /* Receive descriptor flags */
13 #define RDES_OWN (1 << 31) /* Ownership */
14 #define RDES_FS (1 << 30) /* First Descriptor */
15 #define RDES_LS (1 << 29) /* Last Descriptor */
16 #define RDES_IPE (1 << 28) /* IP Checksum error */
17 #define RDES_TCPE (1 << 27) /* TCP Checksum error */
18 #define RDES_UDPE (1 << 26) /* UDP Checksum error */
19 #define RDES_ES (1 << 25) /* Error summary */
20 #define RDES_MF (1 << 24) /* Multicast Frame */
21 #define RDES_RE (1 << 19) /* MII Error reported */
22 #define RDES_TL (1 << 18) /* Frame too Long */
23 #define RDES_RF (1 << 17) /* Runt Frame */
24 #define RDES_CE (1 << 16) /* CRC error */
25 #define RDES_FT (1 << 15) /* Frame Type */
26 #define RDES_FLEN (0x7ff) /* Frame Length */
28 #define RDES_RER (1 << 25) /* Receive End of Ring */
29 #define RDES_RBS (0x7ff) /* Receive Buffer Size */
31 /* Transmit descriptor flags */
33 #define TDES_OWN (1 << 31) /* Ownership */
35 #define TDES_IC (1 << 31) /* Interrupt on Completion */
36 #define TDES_FS (1 << 30) /* First Segment */
37 #define TDES_LS (1 << 29) /* Last Segment */
38 #define TDES_IPCKG (1 << 28) /* IP Checksum generate */
39 #define TDES_TCPCKG (1 << 27) /* TCP Checksum generate */
40 #define TDES_UDPCKG (1 << 26) /* UDP Checksum generate */
41 #define TDES_TER (1 << 25) /* Transmit End of Ring */
42 #define TDES_TBS (0x7ff) /* Transmit Buffer Size */
45 * Network controller register offsets
47 #define KS8695_DTXC (0x00) /* DMA Transmit Control */
48 #define KS8695_DRXC (0x04) /* DMA Receive Control */
49 #define KS8695_DTSC (0x08) /* DMA Transmit Start Command */
50 #define KS8695_DRSC (0x0c) /* DMA Receive Start Command */
51 #define KS8695_TDLB (0x10) /* Transmit Descriptor List
52 * Base Address
54 #define KS8695_RDLB (0x14) /* Receive Descriptor List
55 * Base Address
57 #define KS8695_MAL (0x18) /* MAC Station Address Low */
58 #define KS8695_MAH (0x1c) /* MAC Station Address High */
59 #define KS8695_AAL_(n) (0x80 + ((n)*8)) /* MAC Additional
60 * Station Address
61 * (0..15) Low
63 #define KS8695_AAH_(n) (0x84 + ((n)*8)) /* MAC Additional
64 * Station Address
65 * (0..15) High
69 /* DMA Transmit Control Register */
70 #define DTXC_TRST (1 << 31) /* Soft Reset */
71 #define DTXC_TBS (0x3f << 24) /* Transmit Burst Size */
72 #define DTXC_TUCG (1 << 18) /* Transmit UDP
73 * Checksum Generate
75 #define DTXC_TTCG (1 << 17) /* Transmit TCP
76 * Checksum Generate
78 #define DTXC_TICG (1 << 16) /* Transmit IP
79 * Checksum Generate
81 #define DTXC_TFCE (1 << 9) /* Transmit Flow
82 * Control Enable
84 #define DTXC_TLB (1 << 8) /* Loopback mode */
85 #define DTXC_TEP (1 << 2) /* Transmit Enable Padding */
86 #define DTXC_TAC (1 << 1) /* Transmit Add CRC */
87 #define DTXC_TE (1 << 0) /* TX Enable */
89 /* DMA Receive Control Register */
90 #define DRXC_RBS (0x3f << 24) /* Receive Burst Size */
91 #define DRXC_RUCC (1 << 18) /* Receive UDP Checksum check */
92 #define DRXC_RTCG (1 << 17) /* Receive TCP Checksum check */
93 #define DRXC_RICG (1 << 16) /* Receive IP Checksum check */
94 #define DRXC_RFCE (1 << 9) /* Receive Flow Control
95 * Enable
97 #define DRXC_RB (1 << 6) /* Receive Broadcast */
98 #define DRXC_RM (1 << 5) /* Receive Multicast */
99 #define DRXC_RU (1 << 4) /* Receive Unicast */
100 #define DRXC_RERR (1 << 3) /* Receive Error Frame */
101 #define DRXC_RA (1 << 2) /* Receive All */
102 #define DRXC_RE (1 << 0) /* RX Enable */
104 /* Additional Station Address High */
105 #define AAH_E (1 << 31) /* Address Enabled */
107 #endif /* KS8695NET_H */