drivers/staging/winbond/wb35rx.c

   1 //============================================================================
   2 //  Copyright (c) 1996-2002 Winbond Electronic Corporation
   3 //
   4 //  Module Name:
   5 //    Wb35Rx.c
   6 //
   7 //  Abstract:
   8 //    Processing the Rx message from down layer
   9 //
  10 //============================================================================
  11 #include <linux/usb.h>
  12
  13 #include "core.h"
  14 #include "sysdef.h"
  15 #include "wb35rx_f.h"
  16
  17 static void packet_came(struct ieee80211_hw *hw, char *pRxBufferAddress, int PacketSize)
  18 {
  19         struct wbsoft_priv *priv = hw->priv;
  20         struct sk_buff *skb;
  21         struct ieee80211_rx_status rx_status = {0};
  22
  23         if (!priv->enabled)
  24                 return;
  25
  26         skb = dev_alloc_skb(PacketSize);
  27         if (!skb) {
  28                 printk("Not enough memory for packet, FIXME\n");
  29                 return;
  30         }
  31
  32         memcpy(skb_put(skb, PacketSize),
  33                pRxBufferAddress,
  34                PacketSize);
  35
  36 /*
  37         rx_status.rate = 10;
  38         rx_status.channel = 1;
  39         rx_status.freq = 12345;
  40         rx_status.phymode = MODE_IEEE80211B;
  41 */
  42
  43         ieee80211_rx_irqsafe(hw, skb, &rx_status);
  44 }
  45
  46 static void Wb35Rx_adjust(PDESCRIPTOR pRxDes)
  47 {
  48         u32 *   pRxBufferAddress;
  49         u32     DecryptionMethod;
  50         u32     i;
  51         u16     BufferSize;
  52
  53         DecryptionMethod = pRxDes->R01.R01_decryption_method;
  54         pRxBufferAddress = pRxDes->buffer_address[0];
  55         BufferSize = pRxDes->buffer_size[0];
  56
  57         // Adjust the last part of data. Only data left
  58         BufferSize -= 4; // For CRC-32
  59         if (DecryptionMethod)
  60                 BufferSize -= 4;
  61         if (DecryptionMethod == 3) // For CCMP
  62                 BufferSize -= 4;
  63
  64         // Adjust the IV field which after 802.11 header and ICV field.
  65         if (DecryptionMethod == 1) // For WEP
  66         {
  67                 for( i=6; i>0; i-- )
  68                         pRxBufferAddress[i] = pRxBufferAddress[i-1];
  69                 pRxDes->buffer_address[0] = pRxBufferAddress + 1;
  70                 BufferSize -= 4; // 4 byte for IV
  71         }
  72         else if( DecryptionMethod ) // For TKIP and CCMP
  73         {
  74                 for (i=7; i>1; i--)
  75                         pRxBufferAddress[i] = pRxBufferAddress[i-2];
  76                 pRxDes->buffer_address[0] = pRxBufferAddress + 2;//Update the descriptor, shift 8 byte
  77                 BufferSize -= 8; // 8 byte for IV + ICV
  78         }
  79         pRxDes->buffer_size[0] = BufferSize;
  80 }
  81
  82 static u16 Wb35Rx_indicate(struct ieee80211_hw *hw)
  83 {
  84         struct wbsoft_priv *priv = hw->priv;
  85         struct hw_data * pHwData = &priv->sHwData;
  86         DESCRIPTOR      RxDes;
  87         struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
  88         u8 *            pRxBufferAddress;
  89         u16             PacketSize;
  90         u16             stmp, BufferSize, stmp2 = 0;
  91         u32             RxBufferId;
  92
  93         // Only one thread be allowed to run into the following
  94         do {
  95                 RxBufferId = pWb35Rx->RxProcessIndex;
  96                 if (pWb35Rx->RxOwner[ RxBufferId ]) //Owner by VM
  97                         break;
  98
  99                 pWb35Rx->RxProcessIndex++;
 100                 pWb35Rx->RxProcessIndex %= MAX_USB_RX_BUFFER_NUMBER;
 101
 102                 pRxBufferAddress = pWb35Rx->pDRx;
 103                 BufferSize = pWb35Rx->RxBufferSize[ RxBufferId ];
 104
 105                 // Parse the bulkin buffer
 106                 while (BufferSize >= 4) {
 107                         if ((cpu_to_le32(*(u32 *)pRxBufferAddress) & 0x0fffffff) == RX_END_TAG) //Is ending? 921002.9.a
 108                                 break;
 109
 110                         // Get the R00 R01 first
 111                         RxDes.R00.value = le32_to_cpu(*(u32 *)pRxBufferAddress);
 112                         PacketSize = (u16)RxDes.R00.R00_receive_byte_count;
 113                         RxDes.R01.value = le32_to_cpu(*((u32 *)(pRxBufferAddress+4)));
 114                         // For new DMA 4k
 115                         if ((PacketSize & 0x03) > 0)
 116                                 PacketSize -= 4;
 117
 118                         // Basic check for Rx length. Is length valid?
 119                         if (PacketSize > MAX_PACKET_SIZE) {
 120                                 #ifdef _PE_RX_DUMP_
 121                                 printk("Serious ERROR : Rx data size too long, size =%d\n", PacketSize);
 122                                 #endif
 123
 124                                 pWb35Rx->EP3vm_state = VM_STOP;
 125                                 pWb35Rx->Ep3ErrorCount2++;
 126                                 break;
 127                         }
 128
 129                         // Start to process Rx buffer
 130 //                      RxDes.Descriptor_ID = RxBufferId; // Due to synchronous indicate, the field doesn't necessary to use.
 131                         BufferSize -= 8; //subtract 8 byte for 35's USB header length
 132                         pRxBufferAddress += 8;
 133
 134                         RxDes.buffer_address[0] = pRxBufferAddress;
 135                         RxDes.buffer_size[0] = PacketSize;
 136                         RxDes.buffer_number = 1;
 137                         RxDes.buffer_start_index = 0;
 138                         RxDes.buffer_total_size = RxDes.buffer_size[0];
 139                         Wb35Rx_adjust(&RxDes);
 140
 141                         packet_came(hw, pRxBufferAddress, PacketSize);
 142
 143                         // Move RxBuffer point to the next
 144                         stmp = PacketSize + 3;
 145                         stmp &= ~0x03; // 4n alignment
 146                         pRxBufferAddress += stmp;
 147                         BufferSize -= stmp;
 148                         stmp2 += stmp;
 149                 }
 150
 151                 // Reclaim resource
 152                 pWb35Rx->RxOwner[ RxBufferId ] = 1;
 153         } while (true);
 154
 155         return stmp2;
 156 }
 157
 158 static void Wb35Rx(struct ieee80211_hw *hw);
 159
 160 static void Wb35Rx_Complete(struct urb *urb)
 161 {
 162         struct ieee80211_hw *hw = urb->context;
 163         struct wbsoft_priv *priv = hw->priv;
 164         struct hw_data * pHwData = &priv->sHwData;
 165         struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
 166         u8 *            pRxBufferAddress;
 167         u32             SizeCheck;
 168         u16             BulkLength;
 169         u32             RxBufferId;
 170         R00_DESCRIPTOR  R00;
 171
 172         // Variable setting
 173         pWb35Rx->EP3vm_state = VM_COMPLETED;
 174         pWb35Rx->EP3VM_status = urb->status;//Store the last result of Irp
 175
 176         RxBufferId = pWb35Rx->CurrentRxBufferId;
 177
 178         pRxBufferAddress = pWb35Rx->pDRx;
 179         BulkLength = (u16)urb->actual_length;
 180
 181         // The IRP is completed
 182         pWb35Rx->EP3vm_state = VM_COMPLETED;
 183
 184         if (pHwData->SurpriseRemove || pHwData->HwStop) // Must be here, or RxBufferId is invalid
 185                 goto error;
 186
 187         if (pWb35Rx->rx_halt)
 188                 goto error;
 189
 190         // Start to process the data only in successful condition
 191         pWb35Rx->RxOwner[ RxBufferId ] = 0; // Set the owner to driver
 192         R00.value = le32_to_cpu(*(u32 *)pRxBufferAddress);
 193
 194         // The URB is completed, check the result
 195         if (pWb35Rx->EP3VM_status != 0) {
 196                 #ifdef _PE_USB_STATE_DUMP_
 197                 printk("EP3 IoCompleteRoutine return error\n");
 198                 #endif
 199                 pWb35Rx->EP3vm_state = VM_STOP;
 200                 goto error;
 201         }
 202
 203         // 20060220 For recovering. check if operating in single USB mode
 204         if (!HAL_USB_MODE_BURST(pHwData)) {
 205                 SizeCheck = R00.R00_receive_byte_count;  //20060926 anson's endian
 206                 if ((SizeCheck & 0x03) > 0)
 207                         SizeCheck -= 4;
 208                 SizeCheck = (SizeCheck + 3) & ~0x03;
 209                 SizeCheck += 12; // 8 + 4 badbeef
 210                 if ((BulkLength > 1600) ||
 211                         (SizeCheck > 1600) ||
 212                         (BulkLength != SizeCheck) ||
 213                         (BulkLength == 0)) { // Add for fail Urb
 214                         pWb35Rx->EP3vm_state = VM_STOP;
 215                         pWb35Rx->Ep3ErrorCount2++;
 216                 }
 217         }
 218
 219         // Indicating the receiving data
 220         pWb35Rx->ByteReceived += BulkLength;
 221         pWb35Rx->RxBufferSize[ RxBufferId ] = BulkLength;
 222
 223         if (!pWb35Rx->RxOwner[ RxBufferId ])
 224                 Wb35Rx_indicate(hw);
 225
 226         kfree(pWb35Rx->pDRx);
 227         // Do the next receive
 228         Wb35Rx(hw);
 229         return;
 230
 231 error:
 232         pWb35Rx->RxOwner[ RxBufferId ] = 1; // Set the owner to hardware
 233         atomic_dec(&pWb35Rx->RxFireCounter);
 234         pWb35Rx->EP3vm_state = VM_STOP;
 235 }
 236
 237 // This function cannot reentrain
 238 static void Wb35Rx(struct ieee80211_hw *hw)
 239 {
 240         struct wbsoft_priv *priv = hw->priv;
 241         struct hw_data * pHwData = &priv->sHwData;
 242         struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
 243         u8 *    pRxBufferAddress;
 244         struct urb *urb = pWb35Rx->RxUrb;
 245         int     retv;
 246         u32     RxBufferId;
 247
 248         //
 249         // Issuing URB
 250         //
 251         if (pHwData->SurpriseRemove || pHwData->HwStop)
 252                 goto error;
 253
 254         if (pWb35Rx->rx_halt)
 255                 goto error;
 256
 257         // Get RxBuffer's ID
 258         RxBufferId = pWb35Rx->RxBufferId;
 259         if (!pWb35Rx->RxOwner[RxBufferId]) {
 260                 // It's impossible to run here.
 261                 #ifdef _PE_RX_DUMP_
 262                 printk("Rx driver fifo unavailable\n");
 263                 #endif
 264                 goto error;
 265         }
 266
 267         // Update buffer point, then start to bulkin the data from USB
 268         pWb35Rx->RxBufferId++;
 269         pWb35Rx->RxBufferId %= MAX_USB_RX_BUFFER_NUMBER;
 270
 271         pWb35Rx->CurrentRxBufferId = RxBufferId;
 272
 273         pWb35Rx->pDRx = kzalloc(MAX_USB_RX_BUFFER, GFP_ATOMIC);
 274         if (!pWb35Rx->pDRx) {
 275                 printk("w35und: Rx memory alloc failed\n");
 276                 goto error;
 277         }
 278         pRxBufferAddress = pWb35Rx->pDRx;
 279
 280         usb_fill_bulk_urb(urb, pHwData->WbUsb.udev,
 281                           usb_rcvbulkpipe(pHwData->WbUsb.udev, 3),
 282                           pRxBufferAddress, MAX_USB_RX_BUFFER,
 283                           Wb35Rx_Complete, hw);
 284
 285         pWb35Rx->EP3vm_state = VM_RUNNING;
 286
 287         retv = usb_submit_urb(urb, GFP_ATOMIC);
 288
 289         if (retv != 0) {
 290                 printk("Rx URB sending error\n");
 291                 goto error;
 292         }
 293         return;
 294
 295 error:
 296         // VM stop
 297         pWb35Rx->EP3vm_state = VM_STOP;
 298         atomic_dec(&pWb35Rx->RxFireCounter);
 299 }
 300
 301 void Wb35Rx_start(struct ieee80211_hw *hw)
 302 {
 303         struct wbsoft_priv *priv = hw->priv;
 304         struct hw_data * pHwData = &priv->sHwData;
 305         struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
 306
 307         // Allow only one thread to run into the Wb35Rx() function
 308         if (atomic_inc_return(&pWb35Rx->RxFireCounter) == 1) {
 309                 pWb35Rx->EP3vm_state = VM_RUNNING;
 310                 Wb35Rx(hw);
 311         } else
 312                 atomic_dec(&pWb35Rx->RxFireCounter);
 313 }
 314
 315 //=====================================================================================
 316 static void Wb35Rx_reset_descriptor(  struct hw_data * pHwData )
 317 {
 318         struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
 319         u32     i;
 320
 321         pWb35Rx->ByteReceived = 0;
 322         pWb35Rx->RxProcessIndex = 0;
 323         pWb35Rx->RxBufferId = 0;
 324         pWb35Rx->EP3vm_state = VM_STOP;
 325         pWb35Rx->rx_halt = 0;
 326
 327         // Initial the Queue. The last buffer is reserved for used if the Rx resource is unavailable.
 328         for( i=0; i<MAX_USB_RX_BUFFER_NUMBER; i++ )
 329                 pWb35Rx->RxOwner[i] = 1;
 330 }
 331
 332 unsigned char Wb35Rx_initial(struct hw_data * pHwData)
 333 {
 334         struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
 335
 336         // Initial the Buffer Queue
 337         Wb35Rx_reset_descriptor( pHwData );
 338
 339         pWb35Rx->RxUrb = usb_alloc_urb(0, GFP_ATOMIC);
 340         return (!!pWb35Rx->RxUrb);
 341 }
 342
 343 void Wb35Rx_stop(struct hw_data * pHwData)
 344 {
 345         struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
 346
 347         // Canceling the Irp if already sends it out.
 348         if (pWb35Rx->EP3vm_state == VM_RUNNING) {
 349                 usb_unlink_urb( pWb35Rx->RxUrb ); // Only use unlink, let Wb35Rx_destroy to free them
 350                 #ifdef _PE_RX_DUMP_
 351                 printk("EP3 Rx stop\n");
 352                 #endif
 353         }
 354 }
 355
 356 // Needs process context
 357 void Wb35Rx_destroy(struct hw_data * pHwData)
 358 {
 359         struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
 360
 361         do {
 362                 msleep(10); // Delay for waiting function enter 940623.1.a
 363         } while (pWb35Rx->EP3vm_state != VM_STOP);
 364         msleep(10); // Delay for waiting function exit 940623.1.b
 365
 366         if (pWb35Rx->RxUrb)
 367                 usb_free_urb( pWb35Rx->RxUrb );
 368         #ifdef _PE_RX_DUMP_
 369         printk("Wb35Rx_destroy OK\n");
 370         #endif
 371 }
 372