staging: et131x: Remove redundant phy code
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / staging / et131x / et131x_defs.h
blob3d5193fdb0036407bd5a742c688afc32e10b97b9
1 /*
2 * Agere Systems Inc.
3 * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
5 * Copyright © 2005 Agere Systems Inc.
6 * All rights reserved.
7 * http://www.agere.com
9 *------------------------------------------------------------------------------
11 * et131x_defs.h - Defines, structs, enums, prototypes, etc. to assist with OS
12 * compatibility
14 *------------------------------------------------------------------------------
16 * SOFTWARE LICENSE
18 * This software is provided subject to the following terms and conditions,
19 * which you should read carefully before using the software. Using this
20 * software indicates your acceptance of these terms and conditions. If you do
21 * not agree with these terms and conditions, do not use the software.
23 * Copyright © 2005 Agere Systems Inc.
24 * All rights reserved.
26 * Redistribution and use in source or binary forms, with or without
27 * modifications, are permitted provided that the following conditions are met:
29 * . Redistributions of source code must retain the above copyright notice, this
30 * list of conditions and the following Disclaimer as comments in the code as
31 * well as in the documentation and/or other materials provided with the
32 * distribution.
34 * . Redistributions in binary form must reproduce the above copyright notice,
35 * this list of conditions and the following Disclaimer in the documentation
36 * and/or other materials provided with the distribution.
38 * . Neither the name of Agere Systems Inc. nor the names of the contributors
39 * may be used to endorse or promote products derived from this software
40 * without specific prior written permission.
42 * Disclaimer
44 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
45 * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
46 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
47 * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
48 * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
49 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
50 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
51 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
52 * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
53 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
54 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
55 * DAMAGE.
59 #ifndef __ET131X_DEFS_H__
60 #define __ET131X_DEFS_H__
62 /* Packet and header sizes */
63 #define NIC_MIN_PACKET_SIZE 60
65 /* Multicast list size */
66 #define NIC_MAX_MCAST_LIST 128
68 /* Supported Filters */
69 #define ET131X_PACKET_TYPE_DIRECTED 0x0001
70 #define ET131X_PACKET_TYPE_MULTICAST 0x0002
71 #define ET131X_PACKET_TYPE_BROADCAST 0x0004
72 #define ET131X_PACKET_TYPE_PROMISCUOUS 0x0008
73 #define ET131X_PACKET_TYPE_ALL_MULTICAST 0x0010
75 /* Tx Timeout */
76 #define ET131X_TX_TIMEOUT (1 * HZ)
77 #define NIC_SEND_HANG_THRESHOLD 0
79 /* MP_TCB flags */
80 #define fMP_DEST_MULTI 0x00000001
81 #define fMP_DEST_BROAD 0x00000002
83 /* MP_ADAPTER flags */
84 #define fMP_ADAPTER_RECV_LOOKASIDE 0x00000004
85 #define fMP_ADAPTER_INTERRUPT_IN_USE 0x00000008
86 #define fMP_ADAPTER_SECONDARY 0x00000010
88 /* MP_SHARED flags */
89 #define fMP_ADAPTER_SHUTDOWN 0x00100000
90 #define fMP_ADAPTER_LOWER_POWER 0x00200000
92 #define fMP_ADAPTER_NON_RECOVER_ERROR 0x00800000
93 #define fMP_ADAPTER_RESET_IN_PROGRESS 0x01000000
94 #define fMP_ADAPTER_NO_CABLE 0x02000000
95 #define fMP_ADAPTER_HARDWARE_ERROR 0x04000000
96 #define fMP_ADAPTER_REMOVE_IN_PROGRESS 0x08000000
97 #define fMP_ADAPTER_HALT_IN_PROGRESS 0x10000000
99 #define fMP_ADAPTER_FAIL_SEND_MASK 0x3ff00000
100 #define fMP_ADAPTER_NOT_READY_MASK 0x3ff00000
102 /* Some offsets in PCI config space that are actually used. */
103 #define ET1310_PCI_MAX_PYLD 0x4C
104 #define ET1310_PCI_MAC_ADDRESS 0xA4
105 #define ET1310_PCI_EEPROM_STATUS 0xB2
106 #define ET1310_PCI_ACK_NACK 0xC0
107 #define ET1310_PCI_REPLAY 0xC2
108 #define ET1310_PCI_L0L1LATENCY 0xCF
110 /* PCI Vendor/Product IDs */
111 #define ET131X_PCI_VENDOR_ID 0x11C1 /* Agere Systems */
112 #define ET131X_PCI_DEVICE_ID_GIG 0xED00 /* ET1310 1000 Base-T 8 */
113 #define ET131X_PCI_DEVICE_ID_FAST 0xED01 /* ET1310 100 Base-T */
115 /* Define order of magnitude converter */
116 #define NANO_IN_A_MICRO 1000
118 #define PARM_RX_NUM_BUFS_DEF 4
119 #define PARM_RX_TIME_INT_DEF 10
120 #define PARM_RX_MEM_END_DEF 0x2bc
121 #define PARM_TX_TIME_INT_DEF 40
122 #define PARM_TX_NUM_BUFS_DEF 4
123 #define PARM_DMA_CACHE_DEF 0
126 #endif /* __ET131X_DEFS_H__ */