arch/arm/plat-omap/include/plat/usb.h

   1 // include/asm-arm/mach-omap/usb.h
   2
   3 #ifndef __ASM_ARCH_OMAP_USB_H
   4 #define __ASM_ARCH_OMAP_USB_H
   5
   6 #include <linux/usb/musb.h>
   7 #include <plat/board.h>
   8
   9 #define OMAP3_HS_USB_PORTS      3
  10
  11 enum usbhs_omap_port_mode {
  12         OMAP_USBHS_PORT_MODE_UNUSED,
  13         OMAP_EHCI_PORT_MODE_PHY,
  14         OMAP_EHCI_PORT_MODE_TLL,
  15         OMAP_EHCI_PORT_MODE_HSIC,
  16         OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
  17         OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
  18         OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
  19         OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM,
  20         OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0,
  21         OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM,
  22         OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
  23         OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
  24         OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
  25         OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
  26 };
  27
  28 struct usbhs_omap_board_data {
  29         enum usbhs_omap_port_mode       port_mode[OMAP3_HS_USB_PORTS];
  30
  31         /* have to be valid if phy_reset is true and portx is in phy mode */
  32         int     reset_gpio_port[OMAP3_HS_USB_PORTS];
  33
  34         /* Set this to true for ES2.x silicon */
  35         unsigned                        es2_compatibility:1;
  36
  37         unsigned                        phy_reset:1;
  38
  39         /*
  40          * Regulators for USB PHYs.
  41          * Each PHY can have a separate regulator.
  42          */
  43         struct regulator                *regulator[OMAP3_HS_USB_PORTS];
  44 };
  45
  46 struct ehci_hcd_omap_platform_data {
  47         enum usbhs_omap_port_mode       port_mode[OMAP3_HS_USB_PORTS];
  48         int                             reset_gpio_port[OMAP3_HS_USB_PORTS];
  49         struct regulator                *regulator[OMAP3_HS_USB_PORTS];
  50         unsigned                        phy_reset:1;
  51 };
  52
  53 struct ohci_hcd_omap_platform_data {
  54         enum usbhs_omap_port_mode       port_mode[OMAP3_HS_USB_PORTS];
  55         unsigned                        es2_compatibility:1;
  56 };
  57
  58 struct usbhs_omap_platform_data {
  59         enum usbhs_omap_port_mode               port_mode[OMAP3_HS_USB_PORTS];
  60
  61         struct ehci_hcd_omap_platform_data      *ehci_data;
  62         struct ohci_hcd_omap_platform_data      *ohci_data;
  63 };
  64 /*-------------------------------------------------------------------------*/
  65
  66 #define OMAP1_OTG_BASE                  0xfffb0400
  67 #define OMAP1_UDC_BASE                  0xfffb4000
  68 #define OMAP1_OHCI_BASE                 0xfffba000
  69
  70 #define OMAP2_OHCI_BASE                 0x4805e000
  71 #define OMAP2_UDC_BASE                  0x4805e200
  72 #define OMAP2_OTG_BASE                  0x4805e300
  73
  74 #ifdef CONFIG_ARCH_OMAP1
  75
  76 #define OTG_BASE                        OMAP1_OTG_BASE
  77 #define UDC_BASE                        OMAP1_UDC_BASE
  78 #define OMAP_OHCI_BASE                  OMAP1_OHCI_BASE
  79
  80 #else
  81
  82 #define OTG_BASE                        OMAP2_OTG_BASE
  83 #define UDC_BASE                        OMAP2_UDC_BASE
  84 #define OMAP_OHCI_BASE                  OMAP2_OHCI_BASE
  85
  86 struct omap_musb_board_data {
  87         u8      interface_type;
  88         u8      mode;
  89         u16     power;
  90         unsigned extvbus:1;
  91         void    (*set_phy_power)(u8 on);
  92         void    (*clear_irq)(void);
  93         void    (*set_mode)(u8 mode);
  94         void    (*reset)(void);
  95 };
  96
  97 enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
  98
  99 extern void usb_musb_init(struct omap_musb_board_data *board_data);
 100
 101 extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
 102
 103 extern int omap_usbhs_enable(struct device *dev);
 104 extern void omap_usbhs_disable(struct device *dev);
 105
 106 extern int omap4430_phy_power(struct device *dev, int ID, int on);
 107 extern int omap4430_phy_set_clk(struct device *dev, int on);
 108 extern int omap4430_phy_init(struct device *dev);
 109 extern int omap4430_phy_exit(struct device *dev);
 110 extern int omap4430_phy_suspend(struct device *dev, int suspend);
 111 #endif
 112
 113 /*
 114  * FIXME correct answer depends on hmc_mode,
 115  * as does (on omap1) any nonzero value for config->otg port number
 116  */
 117 #ifdef  CONFIG_USB_GADGET_OMAP
 118 #define is_usb0_device(config)  1
 119 #else
 120 #define is_usb0_device(config)  0
 121 #endif
 122
 123 void omap_otg_init(struct omap_usb_config *config);
 124
 125 #if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
 126 void omap1_usb_init(struct omap_usb_config *pdata);
 127 #else
 128 static inline void omap1_usb_init(struct omap_usb_config *pdata)
 129 {
 130 }
 131 #endif
 132
 133 #if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE)
 134 void omap2_usbfs_init(struct omap_usb_config *pdata);
 135 #else
 136 static inline void omap2_usbfs_init(struct omap_usb_config *pdata)
 137 {
 138 }
 139 #endif
 140
 141 /*-------------------------------------------------------------------------*/
 142
 143 /*
 144  * OTG and transceiver registers, for OMAPs starting with ARM926
 145  */
 146 #define OTG_REV                         (OTG_BASE + 0x00)
 147 #define OTG_SYSCON_1                    (OTG_BASE + 0x04)
 148 #       define   USB2_TRX_MODE(w)       (((w)>>24)&0x07)
 149 #       define   USB1_TRX_MODE(w)       (((w)>>20)&0x07)
 150 #       define   USB0_TRX_MODE(w)       (((w)>>16)&0x07)
 151 #       define   OTG_IDLE_EN            (1 << 15)
 152 #       define   HST_IDLE_EN            (1 << 14)
 153 #       define   DEV_IDLE_EN            (1 << 13)
 154 #       define   OTG_RESET_DONE         (1 << 2)
 155 #       define   OTG_SOFT_RESET         (1 << 1)
 156 #define OTG_SYSCON_2                    (OTG_BASE + 0x08)
 157 #       define   OTG_EN                 (1 << 31)
 158 #       define   USBX_SYNCHRO           (1 << 30)
 159 #       define   OTG_MST16              (1 << 29)
 160 #       define   SRP_GPDATA             (1 << 28)
 161 #       define   SRP_GPDVBUS            (1 << 27)
 162 #       define   SRP_GPUVBUS(w)         (((w)>>24)&0x07)
 163 #       define   A_WAIT_VRISE(w)        (((w)>>20)&0x07)
 164 #       define   B_ASE_BRST(w)          (((w)>>16)&0x07)
 165 #       define   SRP_DPW                (1 << 14)
 166 #       define   SRP_DATA               (1 << 13)
 167 #       define   SRP_VBUS               (1 << 12)
 168 #       define   OTG_PADEN              (1 << 10)
 169 #       define   HMC_PADEN              (1 << 9)
 170 #       define   UHOST_EN               (1 << 8)
 171 #       define   HMC_TLLSPEED           (1 << 7)
 172 #       define   HMC_TLLATTACH          (1 << 6)
 173 #       define   OTG_HMC(w)             (((w)>>0)&0x3f)
 174 #define OTG_CTRL                        (OTG_BASE + 0x0c)
 175 #       define   OTG_USB2_EN            (1 << 29)
 176 #       define   OTG_USB2_DP            (1 << 28)
 177 #       define   OTG_USB2_DM            (1 << 27)
 178 #       define   OTG_USB1_EN            (1 << 26)
 179 #       define   OTG_USB1_DP            (1 << 25)
 180 #       define   OTG_USB1_DM            (1 << 24)
 181 #       define   OTG_USB0_EN            (1 << 23)
 182 #       define   OTG_USB0_DP            (1 << 22)
 183 #       define   OTG_USB0_DM            (1 << 21)
 184 #       define   OTG_ASESSVLD           (1 << 20)
 185 #       define   OTG_BSESSEND           (1 << 19)
 186 #       define   OTG_BSESSVLD           (1 << 18)
 187 #       define   OTG_VBUSVLD            (1 << 17)
 188 #       define   OTG_ID                 (1 << 16)
 189 #       define   OTG_DRIVER_SEL         (1 << 15)
 190 #       define   OTG_A_SETB_HNPEN       (1 << 12)
 191 #       define   OTG_A_BUSREQ           (1 << 11)
 192 #       define   OTG_B_HNPEN            (1 << 9)
 193 #       define   OTG_B_BUSREQ           (1 << 8)
 194 #       define   OTG_BUSDROP            (1 << 7)
 195 #       define   OTG_PULLDOWN           (1 << 5)
 196 #       define   OTG_PULLUP             (1 << 4)
 197 #       define   OTG_DRV_VBUS           (1 << 3)
 198 #       define   OTG_PD_VBUS            (1 << 2)
 199 #       define   OTG_PU_VBUS            (1 << 1)
 200 #       define   OTG_PU_ID              (1 << 0)
 201 #define OTG_IRQ_EN                      (OTG_BASE + 0x10)       /* 16-bit */
 202 #       define   DRIVER_SWITCH          (1 << 15)
 203 #       define   A_VBUS_ERR             (1 << 13)
 204 #       define   A_REQ_TMROUT           (1 << 12)
 205 #       define   A_SRP_DETECT           (1 << 11)
 206 #       define   B_HNP_FAIL             (1 << 10)
 207 #       define   B_SRP_TMROUT           (1 << 9)
 208 #       define   B_SRP_DONE             (1 << 8)
 209 #       define   B_SRP_STARTED          (1 << 7)
 210 #       define   OPRT_CHG               (1 << 0)
 211 #define OTG_IRQ_SRC                     (OTG_BASE + 0x14)       /* 16-bit */
 212         // same bits as in IRQ_EN
 213 #define OTG_OUTCTRL                     (OTG_BASE + 0x18)       /* 16-bit */
 214 #       define   OTGVPD                 (1 << 14)
 215 #       define   OTGVPU                 (1 << 13)
 216 #       define   OTGPUID                (1 << 12)
 217 #       define   USB2VDR                (1 << 10)
 218 #       define   USB2PDEN               (1 << 9)
 219 #       define   USB2PUEN               (1 << 8)
 220 #       define   USB1VDR                (1 << 6)
 221 #       define   USB1PDEN               (1 << 5)
 222 #       define   USB1PUEN               (1 << 4)
 223 #       define   USB0VDR                (1 << 2)
 224 #       define   USB0PDEN               (1 << 1)
 225 #       define   USB0PUEN               (1 << 0)
 226 #define OTG_TEST                        (OTG_BASE + 0x20)       /* 16-bit */
 227 #define OTG_VENDOR_CODE                 (OTG_BASE + 0xfc)       /* 16-bit */
 228
 229 /*-------------------------------------------------------------------------*/
 230
 231 /* OMAP1 */
 232 #define USB_TRANSCEIVER_CTRL            (0xfffe1000 + 0x0064)
 233 #       define  CONF_USB2_UNI_R         (1 << 8)
 234 #       define  CONF_USB1_UNI_R         (1 << 7)
 235 #       define  CONF_USB_PORT0_R(x)     (((x)>>4)&0x7)
 236 #       define  CONF_USB0_ISOLATE_R     (1 << 3)
 237 #       define  CONF_USB_PWRDN_DM_R     (1 << 2)
 238 #       define  CONF_USB_PWRDN_DP_R     (1 << 1)
 239
 240 /* OMAP2 */
 241 #       define  USB_UNIDIR                      0x0
 242 #       define  USB_UNIDIR_TLL                  0x1
 243 #       define  USB_BIDIR                       0x2
 244 #       define  USB_BIDIR_TLL                   0x3
 245 #       define  USBTXWRMODEI(port, x)   ((x) << (22 - (port * 2)))
 246 #       define  USBT2TLL5PI             (1 << 17)
 247 #       define  USB0PUENACTLOI          (1 << 16)
 248 #       define  USBSTANDBYCTRL          (1 << 15)
 249 /* AM35x */
 250 /* USB 2.0 PHY Control */
 251 #define CONF2_PHY_GPIOMODE      (1 << 23)
 252 #define CONF2_OTGMODE           (3 << 14)
 253 #define CONF2_NO_OVERRIDE       (0 << 14)
 254 #define CONF2_FORCE_HOST        (1 << 14)
 255 #define CONF2_FORCE_DEVICE      (2 << 14)
 256 #define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
 257 #define CONF2_SESENDEN          (1 << 13)
 258 #define CONF2_VBDTCTEN          (1 << 12)
 259 #define CONF2_REFFREQ_24MHZ     (2 << 8)
 260 #define CONF2_REFFREQ_26MHZ     (7 << 8)
 261 #define CONF2_REFFREQ_13MHZ     (6 << 8)
 262 #define CONF2_REFFREQ           (0xf << 8)
 263 #define CONF2_PHYCLKGD          (1 << 7)
 264 #define CONF2_VBUSSENSE         (1 << 6)
 265 #define CONF2_PHY_PLLON         (1 << 5)
 266 #define CONF2_RESET             (1 << 4)
 267 #define CONF2_PHYPWRDN          (1 << 3)
 268 #define CONF2_OTGPWRDN          (1 << 2)
 269 #define CONF2_DATPOL            (1 << 1)
 270
 271 #if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
 272 u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
 273 u32 omap1_usb1_init(unsigned nwires);
 274 u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup);
 275 #else
 276 static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device)
 277 {
 278         return 0;
 279 }
 280 static inline u32 omap1_usb1_init(unsigned nwires)
 281 {
 282         return 0;
 283
 284 }
 285 static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
 286 {
 287         return 0;
 288 }
 289 #endif
 290
 291 #endif  /* __ASM_ARCH_OMAP_USB_H */