x86/amd-iommu: Remove redundant device_flush_dte() calls
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / watchdog / i6300esb.c
blobdb45091ef4349c93b039da2efe1deace7e5cf7e3
1 /*
2 * i6300esb: Watchdog timer driver for Intel 6300ESB chipset
4 * (c) Copyright 2004 Google Inc.
5 * (c) Copyright 2005 David Härdeman <david@2gen.com>
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
12 * based on i810-tco.c which is in turn based on softdog.c
14 * The timer is implemented in the following I/O controller hubs:
15 * (See the intel documentation on http://developer.intel.com.)
16 * 6300ESB chip : document number 300641-004
18 * 2004YYZZ Ross Biro
19 * Initial version 0.01
20 * 2004YYZZ Ross Biro
21 * Version 0.02
22 * 20050210 David Härdeman <david@2gen.com>
23 * Ported driver to kernel 2.6
27 * Includes, defines, variables, module parameters, ...
30 #include <linux/module.h>
31 #include <linux/types.h>
32 #include <linux/kernel.h>
33 #include <linux/fs.h>
34 #include <linux/mm.h>
35 #include <linux/miscdevice.h>
36 #include <linux/watchdog.h>
37 #include <linux/init.h>
38 #include <linux/pci.h>
39 #include <linux/ioport.h>
40 #include <linux/uaccess.h>
41 #include <linux/io.h>
43 /* Module and version information */
44 #define ESB_VERSION "0.05"
45 #define ESB_MODULE_NAME "i6300ESB timer"
46 #define ESB_DRIVER_NAME ESB_MODULE_NAME ", v" ESB_VERSION
47 #define PFX ESB_MODULE_NAME ": "
49 /* PCI configuration registers */
50 #define ESB_CONFIG_REG 0x60 /* Config register */
51 #define ESB_LOCK_REG 0x68 /* WDT lock register */
53 /* Memory mapped registers */
54 #define ESB_TIMER1_REG (BASEADDR + 0x00)/* Timer1 value after each reset */
55 #define ESB_TIMER2_REG (BASEADDR + 0x04)/* Timer2 value after each reset */
56 #define ESB_GINTSR_REG (BASEADDR + 0x08)/* General Interrupt Status Register */
57 #define ESB_RELOAD_REG (BASEADDR + 0x0c)/* Reload register */
59 /* Lock register bits */
60 #define ESB_WDT_FUNC (0x01 << 2) /* Watchdog functionality */
61 #define ESB_WDT_ENABLE (0x01 << 1) /* Enable WDT */
62 #define ESB_WDT_LOCK (0x01 << 0) /* Lock (nowayout) */
64 /* Config register bits */
65 #define ESB_WDT_REBOOT (0x01 << 5) /* Enable reboot on timeout */
66 #define ESB_WDT_FREQ (0x01 << 2) /* Decrement frequency */
67 #define ESB_WDT_INTTYPE (0x03 << 0) /* Interrupt type on timer1 timeout */
69 /* Reload register bits */
70 #define ESB_WDT_TIMEOUT (0x01 << 9) /* Watchdog timed out */
71 #define ESB_WDT_RELOAD (0x01 << 8) /* prevent timeout */
73 /* Magic constants */
74 #define ESB_UNLOCK1 0x80 /* Step 1 to unlock reset registers */
75 #define ESB_UNLOCK2 0x86 /* Step 2 to unlock reset registers */
77 /* internal variables */
78 static void __iomem *BASEADDR;
79 static DEFINE_SPINLOCK(esb_lock); /* Guards the hardware */
80 static unsigned long timer_alive;
81 static struct pci_dev *esb_pci;
82 static unsigned short triggered; /* The status of the watchdog upon boot */
83 static char esb_expect_close;
85 /* We can only use 1 card due to the /dev/watchdog restriction */
86 static int cards_found;
88 /* module parameters */
89 /* 30 sec default heartbeat (1 < heartbeat < 2*1023) */
90 #define WATCHDOG_HEARTBEAT 30
91 static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
92 module_param(heartbeat, int, 0);
93 MODULE_PARM_DESC(heartbeat,
94 "Watchdog heartbeat in seconds. (1<heartbeat<2046, default="
95 __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
97 static int nowayout = WATCHDOG_NOWAYOUT;
98 module_param(nowayout, int, 0);
99 MODULE_PARM_DESC(nowayout,
100 "Watchdog cannot be stopped once started (default="
101 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
104 * Some i6300ESB specific functions
108 * Prepare for reloading the timer by unlocking the proper registers.
109 * This is performed by first writing 0x80 followed by 0x86 to the
110 * reload register. After this the appropriate registers can be written
111 * to once before they need to be unlocked again.
113 static inline void esb_unlock_registers(void)
115 writew(ESB_UNLOCK1, ESB_RELOAD_REG);
116 writew(ESB_UNLOCK2, ESB_RELOAD_REG);
119 static int esb_timer_start(void)
121 u8 val;
123 spin_lock(&esb_lock);
124 esb_unlock_registers();
125 writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
126 /* Enable or Enable + Lock? */
127 val = ESB_WDT_ENABLE | (nowayout ? ESB_WDT_LOCK : 0x00);
128 pci_write_config_byte(esb_pci, ESB_LOCK_REG, val);
129 spin_unlock(&esb_lock);
130 return 0;
133 static int esb_timer_stop(void)
135 u8 val;
137 spin_lock(&esb_lock);
138 /* First, reset timers as suggested by the docs */
139 esb_unlock_registers();
140 writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
141 /* Then disable the WDT */
142 pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x0);
143 pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val);
144 spin_unlock(&esb_lock);
146 /* Returns 0 if the timer was disabled, non-zero otherwise */
147 return val & ESB_WDT_ENABLE;
150 static void esb_timer_keepalive(void)
152 spin_lock(&esb_lock);
153 esb_unlock_registers();
154 writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
155 /* FIXME: Do we need to flush anything here? */
156 spin_unlock(&esb_lock);
159 static int esb_timer_set_heartbeat(int time)
161 u32 val;
163 if (time < 0x1 || time > (2 * 0x03ff))
164 return -EINVAL;
166 spin_lock(&esb_lock);
168 /* We shift by 9, so if we are passed a value of 1 sec,
169 * val will be 1 << 9 = 512, then write that to two
170 * timers => 2 * 512 = 1024 (which is decremented at 1KHz)
172 val = time << 9;
174 /* Write timer 1 */
175 esb_unlock_registers();
176 writel(val, ESB_TIMER1_REG);
178 /* Write timer 2 */
179 esb_unlock_registers();
180 writel(val, ESB_TIMER2_REG);
182 /* Reload */
183 esb_unlock_registers();
184 writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
186 /* FIXME: Do we need to flush everything out? */
188 /* Done */
189 heartbeat = time;
190 spin_unlock(&esb_lock);
191 return 0;
195 * /dev/watchdog handling
198 static int esb_open(struct inode *inode, struct file *file)
200 /* /dev/watchdog can only be opened once */
201 if (test_and_set_bit(0, &timer_alive))
202 return -EBUSY;
204 /* Reload and activate timer */
205 esb_timer_start();
207 return nonseekable_open(inode, file);
210 static int esb_release(struct inode *inode, struct file *file)
212 /* Shut off the timer. */
213 if (esb_expect_close == 42)
214 esb_timer_stop();
215 else {
216 printk(KERN_CRIT PFX
217 "Unexpected close, not stopping watchdog!\n");
218 esb_timer_keepalive();
220 clear_bit(0, &timer_alive);
221 esb_expect_close = 0;
222 return 0;
225 static ssize_t esb_write(struct file *file, const char __user *data,
226 size_t len, loff_t *ppos)
228 /* See if we got the magic character 'V' and reload the timer */
229 if (len) {
230 if (!nowayout) {
231 size_t i;
233 /* note: just in case someone wrote the magic character
234 * five months ago... */
235 esb_expect_close = 0;
237 /* scan to see whether or not we got the
238 * magic character */
239 for (i = 0; i != len; i++) {
240 char c;
241 if (get_user(c, data + i))
242 return -EFAULT;
243 if (c == 'V')
244 esb_expect_close = 42;
248 /* someone wrote to us, we should reload the timer */
249 esb_timer_keepalive();
251 return len;
254 static long esb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
256 int new_options, retval = -EINVAL;
257 int new_heartbeat;
258 void __user *argp = (void __user *)arg;
259 int __user *p = argp;
260 static const struct watchdog_info ident = {
261 .options = WDIOF_SETTIMEOUT |
262 WDIOF_KEEPALIVEPING |
263 WDIOF_MAGICCLOSE,
264 .firmware_version = 0,
265 .identity = ESB_MODULE_NAME,
268 switch (cmd) {
269 case WDIOC_GETSUPPORT:
270 return copy_to_user(argp, &ident,
271 sizeof(ident)) ? -EFAULT : 0;
273 case WDIOC_GETSTATUS:
274 return put_user(0, p);
276 case WDIOC_GETBOOTSTATUS:
277 return put_user(triggered, p);
279 case WDIOC_SETOPTIONS:
281 if (get_user(new_options, p))
282 return -EFAULT;
284 if (new_options & WDIOS_DISABLECARD) {
285 esb_timer_stop();
286 retval = 0;
289 if (new_options & WDIOS_ENABLECARD) {
290 esb_timer_start();
291 retval = 0;
293 return retval;
295 case WDIOC_KEEPALIVE:
296 esb_timer_keepalive();
297 return 0;
299 case WDIOC_SETTIMEOUT:
301 if (get_user(new_heartbeat, p))
302 return -EFAULT;
303 if (esb_timer_set_heartbeat(new_heartbeat))
304 return -EINVAL;
305 esb_timer_keepalive();
306 /* Fall */
308 case WDIOC_GETTIMEOUT:
309 return put_user(heartbeat, p);
310 default:
311 return -ENOTTY;
316 * Kernel Interfaces
319 static const struct file_operations esb_fops = {
320 .owner = THIS_MODULE,
321 .llseek = no_llseek,
322 .write = esb_write,
323 .unlocked_ioctl = esb_ioctl,
324 .open = esb_open,
325 .release = esb_release,
328 static struct miscdevice esb_miscdev = {
329 .minor = WATCHDOG_MINOR,
330 .name = "watchdog",
331 .fops = &esb_fops,
335 * Data for PCI driver interface
337 static DEFINE_PCI_DEVICE_TABLE(esb_pci_tbl) = {
338 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_9), },
339 { 0, }, /* End of list */
341 MODULE_DEVICE_TABLE(pci, esb_pci_tbl);
344 * Init & exit routines
347 static unsigned char __devinit esb_getdevice(struct pci_dev *pdev)
349 if (pci_enable_device(pdev)) {
350 printk(KERN_ERR PFX "failed to enable device\n");
351 goto err_devput;
354 if (pci_request_region(pdev, 0, ESB_MODULE_NAME)) {
355 printk(KERN_ERR PFX "failed to request region\n");
356 goto err_disable;
359 BASEADDR = pci_ioremap_bar(pdev, 0);
360 if (BASEADDR == NULL) {
361 /* Something's wrong here, BASEADDR has to be set */
362 printk(KERN_ERR PFX "failed to get BASEADDR\n");
363 goto err_release;
366 /* Done */
367 esb_pci = pdev;
368 return 1;
370 err_release:
371 pci_release_region(pdev, 0);
372 err_disable:
373 pci_disable_device(pdev);
374 err_devput:
375 return 0;
378 static void __devinit esb_initdevice(void)
380 u8 val1;
381 u16 val2;
384 * Config register:
385 * Bit 5 : 0 = Enable WDT_OUTPUT
386 * Bit 2 : 0 = set the timer frequency to the PCI clock
387 * divided by 2^15 (approx 1KHz).
388 * Bits 1:0 : 11 = WDT_INT_TYPE Disabled.
389 * The watchdog has two timers, it can be setup so that the
390 * expiry of timer1 results in an interrupt and the expiry of
391 * timer2 results in a reboot. We set it to not generate
392 * any interrupts as there is not much we can do with it
393 * right now.
395 pci_write_config_word(esb_pci, ESB_CONFIG_REG, 0x0003);
397 /* Check that the WDT isn't already locked */
398 pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val1);
399 if (val1 & ESB_WDT_LOCK)
400 printk(KERN_WARNING PFX "nowayout already set\n");
402 /* Set the timer to watchdog mode and disable it for now */
403 pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x00);
405 /* Check if the watchdog was previously triggered */
406 esb_unlock_registers();
407 val2 = readw(ESB_RELOAD_REG);
408 if (val2 & ESB_WDT_TIMEOUT)
409 triggered = WDIOF_CARDRESET;
411 /* Reset WDT_TIMEOUT flag and timers */
412 esb_unlock_registers();
413 writew((ESB_WDT_TIMEOUT | ESB_WDT_RELOAD), ESB_RELOAD_REG);
415 /* And set the correct timeout value */
416 esb_timer_set_heartbeat(heartbeat);
419 static int __devinit esb_probe(struct pci_dev *pdev,
420 const struct pci_device_id *ent)
422 int ret;
424 cards_found++;
425 if (cards_found == 1)
426 printk(KERN_INFO PFX "Intel 6300ESB WatchDog Timer Driver v%s\n",
427 ESB_VERSION);
429 if (cards_found > 1) {
430 printk(KERN_ERR PFX "This driver only supports 1 device\n");
431 return -ENODEV;
434 /* Check whether or not the hardware watchdog is there */
435 if (!esb_getdevice(pdev) || esb_pci == NULL)
436 return -ENODEV;
438 /* Check that the heartbeat value is within it's range;
439 if not reset to the default */
440 if (heartbeat < 0x1 || heartbeat > 2 * 0x03ff) {
441 heartbeat = WATCHDOG_HEARTBEAT;
442 printk(KERN_INFO PFX
443 "heartbeat value must be 1<heartbeat<2046, using %d\n",
444 heartbeat);
447 /* Initialize the watchdog and make sure it does not run */
448 esb_initdevice();
450 /* Register the watchdog so that userspace has access to it */
451 ret = misc_register(&esb_miscdev);
452 if (ret != 0) {
453 printk(KERN_ERR PFX
454 "cannot register miscdev on minor=%d (err=%d)\n",
455 WATCHDOG_MINOR, ret);
456 goto err_unmap;
458 printk(KERN_INFO PFX
459 "initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
460 BASEADDR, heartbeat, nowayout);
461 return 0;
463 err_unmap:
464 iounmap(BASEADDR);
465 pci_release_region(esb_pci, 0);
466 pci_disable_device(esb_pci);
467 esb_pci = NULL;
468 return ret;
471 static void __devexit esb_remove(struct pci_dev *pdev)
473 /* Stop the timer before we leave */
474 if (!nowayout)
475 esb_timer_stop();
477 /* Deregister */
478 misc_deregister(&esb_miscdev);
479 iounmap(BASEADDR);
480 pci_release_region(esb_pci, 0);
481 pci_disable_device(esb_pci);
482 esb_pci = NULL;
485 static void esb_shutdown(struct pci_dev *pdev)
487 esb_timer_stop();
490 static struct pci_driver esb_driver = {
491 .name = ESB_MODULE_NAME,
492 .id_table = esb_pci_tbl,
493 .probe = esb_probe,
494 .remove = __devexit_p(esb_remove),
495 .shutdown = esb_shutdown,
498 static int __init watchdog_init(void)
500 return pci_register_driver(&esb_driver);
503 static void __exit watchdog_cleanup(void)
505 pci_unregister_driver(&esb_driver);
506 printk(KERN_INFO PFX "Watchdog Module Unloaded.\n");
509 module_init(watchdog_init);
510 module_exit(watchdog_cleanup);
512 MODULE_AUTHOR("Ross Biro and David Härdeman");
513 MODULE_DESCRIPTION("Watchdog driver for Intel 6300ESB chipsets");
514 MODULE_LICENSE("GPL");
515 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);