?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
rt2x00: fix cancelling uninitialized work
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / ata / ata_piix.c
blobcdec4ab3b159b6796425385bc02a0be1cb88f732
1 /*
2 * ata_piix.c - Intel PATA/SATA controllers
3 *
4 * Maintained by: Jeff Garzik <jgarzik@pobox.com>
5 * Please ALWAYS copy linux-ide@vger.kernel.org
6 * on emails.
7 *
8 *
9 * Copyright 2003-2005 Red Hat Inc
10 * Copyright 2003-2005 Jeff Garzik
11 *
12 *
13 * Copyright header from piix.c:
14 *
15 * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
16 * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
17 * Copyright (C) 2003 Red Hat Inc
18 *
19 *
20 * This program is free software; you can redistribute it and/or modify
21 * it under the terms of the GNU General Public License as published by
22 * the Free Software Foundation; either version 2, or (at your option)
23 * any later version.
24 *
25 * This program is distributed in the hope that it will be useful,
26 * but WITHOUT ANY WARRANTY; without even the implied warranty of
27 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
28 * GNU General Public License for more details.
29 *
30 * You should have received a copy of the GNU General Public License
31 * along with this program; see the file COPYING. If not, write to
32 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
33 *
34 *
35 * libata documentation is available via 'make {ps|pdf}docs',
36 * as Documentation/DocBook/libata.*
37 *
38 * Hardware documentation available at http://developer.intel.com/
39 *
40 * Documentation
41 * Publically available from Intel web site. Errata documentation
42 * is also publically available. As an aide to anyone hacking on this
43 * driver the list of errata that are relevant is below, going back to
44 * PIIX4. Older device documentation is now a bit tricky to find.
45 *
46 * The chipsets all follow very much the same design. The original Triton
47 * series chipsets do _not_ support independant device timings, but this
48 * is fixed in Triton II. With the odd mobile exception the chips then
49 * change little except in gaining more modes until SATA arrives. This
50 * driver supports only the chips with independant timing (that is those
51 * with SITRE and the 0x44 timing register). See pata_oldpiix and pata_mpiix
52 * for the early chip drivers.
53 *
54 * Errata of note:
55 *
56 * Unfixable
57 * PIIX4 errata #9 - Only on ultra obscure hw
58 * ICH3 errata #13 - Not observed to affect real hw
59 * by Intel
60 *
61 * Things we must deal with
62 * PIIX4 errata #10 - BM IDE hang with non UDMA
63 * (must stop/start dma to recover)
64 * 440MX errata #15 - As PIIX4 errata #10
65 * PIIX4 errata #15 - Must not read control registers
66 * during a PIO transfer
67 * 440MX errata #13 - As PIIX4 errata #15
68 * ICH2 errata #21 - DMA mode 0 doesn't work right
69 * ICH0/1 errata #55 - As ICH2 errata #21
70 * ICH2 spec c #9 - Extra operations needed to handle
71 * drive hotswap [NOT YET SUPPORTED]
72 * ICH2 spec c #20 - IDE PRD must not cross a 64K boundary
73 * and must be dword aligned
74 * ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3
75 * ICH7 errata #16 - MWDMA1 timings are incorrect
76 *
77 * Should have been BIOS fixed:
78 * 450NX: errata #19 - DMA hangs on old 450NX
79 * 450NX: errata #20 - DMA hangs on old 450NX
80 * 450NX: errata #25 - Corruption with DMA on old 450NX
81 * ICH3 errata #15 - IDE deadlock under high load
82 * (BIOS must set dev 31 fn 0 bit 23)
83 * ICH3 errata #18 - Don't use native mode
84 */
85
86 #include <linux/kernel.h>
87 #include <linux/module.h>
88 #include <linux/pci.h>
89 #include <linux/init.h>
90 #include <linux/blkdev.h>
91 #include <linux/delay.h>
92 #include <linux/device.h>
93 #include <linux/gfp.h>
94 #include <scsi/scsi_host.h>
95 #include <linux/libata.h>
96 #include <linux/dmi.h>
97
98 #define DRV_NAME "ata_piix"
99 #define DRV_VERSION "2.13"
100
101 enum {
102 PIIX_IOCFG = 0x54, /* IDE I/O configuration register */
103 ICH5_PMR = 0x90, /* port mapping register */
104 ICH5_PCS = 0x92, /* port control and status */
105 PIIX_SIDPR_BAR = 5,
106 PIIX_SIDPR_LEN = 16,
107 PIIX_SIDPR_IDX = 0,
108 PIIX_SIDPR_DATA = 4,
109
110 PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */
111 PIIX_FLAG_SIDPR = (1 << 29), /* SATA idx/data pair regs */
112
113 PIIX_PATA_FLAGS = ATA_FLAG_SLAVE_POSS,
114 PIIX_SATA_FLAGS = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR,
115
116 PIIX_80C_PRI = (1 << 5) | (1 << 4),
117 PIIX_80C_SEC = (1 << 7) | (1 << 6),
118
119 /* constants for mapping table */
120 P0 = 0, /* port 0 */
121 P1 = 1, /* port 1 */
122 P2 = 2, /* port 2 */
123 P3 = 3, /* port 3 */
124 IDE = -1, /* IDE */
125 NA = -2, /* not avaliable */
126 RV = -3, /* reserved */
127
128 PIIX_AHCI_DEVICE = 6,
129
130 /* host->flags bits */
131 PIIX_HOST_BROKEN_SUSPEND = (1 << 24),
132 };
133
134 enum piix_controller_ids {
135 /* controller IDs */
136 piix_pata_mwdma, /* PIIX3 MWDMA only */
137 piix_pata_33, /* PIIX4 at 33Mhz */
138 ich_pata_33, /* ICH up to UDMA 33 only */
139 ich_pata_66, /* ICH up to 66 Mhz */
140 ich_pata_100, /* ICH up to UDMA 100 */
141 ich_pata_100_nomwdma1, /* ICH up to UDMA 100 but with no MWDMA1*/
142 ich5_sata,
143 ich6_sata,
144 ich6m_sata,
145 ich8_sata,
146 ich8_2port_sata,
147 ich8m_apple_sata, /* locks up on second port enable */
148 tolapai_sata,
149 piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */
150 };
151
152 struct piix_map_db {
153 const u32 mask;
154 const u16 port_enable;
155 const int map[][4];
156 };
157
158 struct piix_host_priv {
159 const int *map;
160 u32 saved_iocfg;
161 void __iomem *sidpr;
162 };
163
164 static int piix_init_one(struct pci_dev *pdev,
165 const struct pci_device_id *ent);
166 static void piix_remove_one(struct pci_dev *pdev);
167 static int piix_pata_prereset(struct ata_link *link, unsigned long deadline);
168 static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev);
169 static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev);
170 static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev);
171 static int ich_pata_cable_detect(struct ata_port *ap);
172 static u8 piix_vmw_bmdma_status(struct ata_port *ap);
173 static int piix_sidpr_scr_read(struct ata_link *link,
174 unsigned int reg, u32 *val);
175 static int piix_sidpr_scr_write(struct ata_link *link,
176 unsigned int reg, u32 val);
177 static int piix_sidpr_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
178 unsigned hints);
179 static bool piix_irq_check(struct ata_port *ap);
180 #ifdef CONFIG_PM
181 static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
182 static int piix_pci_device_resume(struct pci_dev *pdev);
183 #endif
184
185 static unsigned int in_module_init = 1;
186
187 static const struct pci_device_id piix_pci_tbl[] = {
188 /* Intel PIIX3 for the 430HX etc */
189 { 0x8086, 0x7010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_mwdma },
190 /* VMware ICH4 */
191 { 0x8086, 0x7111, 0x15ad, 0x1976, 0, 0, piix_pata_vmw },
192 /* Intel PIIX4 for the 430TX/440BX/MX chipset: UDMA 33 */
193 /* Also PIIX4E (fn3 rev 2) and PIIX4M (fn3 rev 3) */
194 { 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
195 /* Intel PIIX4 */
196 { 0x8086, 0x7199, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
197 /* Intel PIIX4 */
198 { 0x8086, 0x7601, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
199 /* Intel PIIX */
200 { 0x8086, 0x84CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
201 /* Intel ICH (i810, i815, i840) UDMA 66*/
202 { 0x8086, 0x2411, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_66 },
203 /* Intel ICH0 : UDMA 33*/
204 { 0x8086, 0x2421, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_33 },
205 /* Intel ICH2M */
206 { 0x8086, 0x244A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
207 /* Intel ICH2 (i810E2, i845, 850, 860) UDMA 100 */
208 { 0x8086, 0x244B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
209 /* Intel ICH3M */
210 { 0x8086, 0x248A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
211 /* Intel ICH3 (E7500/1) UDMA 100 */
212 { 0x8086, 0x248B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
213 /* Intel ICH4-L */
214 { 0x8086, 0x24C1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
215 /* Intel ICH4 (i845GV, i845E, i852, i855) UDMA 100 */
216 { 0x8086, 0x24CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
217 { 0x8086, 0x24CB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
218 /* Intel ICH5 */
219 { 0x8086, 0x24DB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
220 /* C-ICH (i810E2) */
221 { 0x8086, 0x245B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
222 /* ESB (855GME/875P + 6300ESB) UDMA 100 */
223 { 0x8086, 0x25A2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
224 /* ICH6 (and 6) (i915) UDMA 100 */
225 { 0x8086, 0x266F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
226 /* ICH7/7-R (i945, i975) UDMA 100*/
227 { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 },
228 { 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 },
229 /* ICH8 Mobile PATA Controller */
230 { 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
231
232 /* SATA ports */
233
234 /* 82801EB (ICH5) */
235 { 0x8086, 0x24d1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
236 /* 82801EB (ICH5) */
237 { 0x8086, 0x24df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
238 /* 6300ESB (ICH5 variant with broken PCS present bits) */
239 { 0x8086, 0x25a3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
240 /* 6300ESB pretending RAID */
241 { 0x8086, 0x25b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
242 /* 82801FB/FW (ICH6/ICH6W) */
243 { 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
244 /* 82801FR/FRW (ICH6R/ICH6RW) */
245 { 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
246 /* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented).
247 * Attach iff the controller is in IDE mode. */
248 { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID,
249 PCI_CLASS_STORAGE_IDE << 8, 0xffff00, ich6m_sata },
250 /* 82801GB/GR/GH (ICH7, identical to ICH6) */
251 { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
252 /* 2801GBM/GHM (ICH7M, identical to ICH6M) */
253 { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata },
254 /* Enterprise Southbridge 2 (631xESB/632xESB) */
255 { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
256 /* SATA Controller 1 IDE (ICH8) */
257 { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
258 /* SATA Controller 2 IDE (ICH8) */
259 { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
260 /* Mobile SATA Controller IDE (ICH8M), Apple */
261 { 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata },
262 { 0x8086, 0x2828, 0x106b, 0x00a1, 0, 0, ich8m_apple_sata },
263 { 0x8086, 0x2828, 0x106b, 0x00a3, 0, 0, ich8m_apple_sata },
264 /* Mobile SATA Controller IDE (ICH8M) */
265 { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
266 /* SATA Controller IDE (ICH9) */
267 { 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
268 /* SATA Controller IDE (ICH9) */
269 { 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
270 /* SATA Controller IDE (ICH9) */
271 { 0x8086, 0x2926, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
272 /* SATA Controller IDE (ICH9M) */
273 { 0x8086, 0x2928, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
274 /* SATA Controller IDE (ICH9M) */
275 { 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
276 /* SATA Controller IDE (ICH9M) */
277 { 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
278 /* SATA Controller IDE (Tolapai) */
279 { 0x8086, 0x5028, PCI_ANY_ID, PCI_ANY_ID, 0, 0, tolapai_sata },
280 /* SATA Controller IDE (ICH10) */
281 { 0x8086, 0x3a00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
282 /* SATA Controller IDE (ICH10) */
283 { 0x8086, 0x3a06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
284 /* SATA Controller IDE (ICH10) */
285 { 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
286 /* SATA Controller IDE (ICH10) */
287 { 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
288 /* SATA Controller IDE (PCH) */
289 { 0x8086, 0x3b20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
290 /* SATA Controller IDE (PCH) */
291 { 0x8086, 0x3b21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
292 /* SATA Controller IDE (PCH) */
293 { 0x8086, 0x3b26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
294 /* SATA Controller IDE (PCH) */
295 { 0x8086, 0x3b28, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
296 /* SATA Controller IDE (PCH) */
297 { 0x8086, 0x3b2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
298 /* SATA Controller IDE (PCH) */
299 { 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
300 /* SATA Controller IDE (CPT) */
301 { 0x8086, 0x1c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
302 /* SATA Controller IDE (CPT) */
303 { 0x8086, 0x1c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
304 /* SATA Controller IDE (CPT) */
305 { 0x8086, 0x1c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
306 /* SATA Controller IDE (CPT) */
307 { 0x8086, 0x1c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
308 /* SATA Controller IDE (PBG) */
309 { 0x8086, 0x1d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
310 /* SATA Controller IDE (PBG) */
311 { 0x8086, 0x1d08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
312 { } /* terminate list */
313 };
314
315 static struct pci_driver piix_pci_driver = {
316 .name = DRV_NAME,
317 .id_table = piix_pci_tbl,
318 .probe = piix_init_one,
319 .remove = piix_remove_one,
320 #ifdef CONFIG_PM
321 .suspend = piix_pci_device_suspend,
322 .resume = piix_pci_device_resume,
323 #endif
324 };
325
326 static struct scsi_host_template piix_sht = {
327 ATA_BMDMA_SHT(DRV_NAME),
328 };
329
330 static struct ata_port_operations piix_sata_ops = {
331 .inherits = &ata_bmdma32_port_ops,
332 .sff_irq_check = piix_irq_check,
333 };
334
335 static struct ata_port_operations piix_pata_ops = {
336 .inherits = &piix_sata_ops,
337 .cable_detect = ata_cable_40wire,
338 .set_piomode = piix_set_piomode,
339 .set_dmamode = piix_set_dmamode,
340 .prereset = piix_pata_prereset,
341 };
342
343 static struct ata_port_operations piix_vmw_ops = {
344 .inherits = &piix_pata_ops,
345 .bmdma_status = piix_vmw_bmdma_status,
346 };
347
348 static struct ata_port_operations ich_pata_ops = {
349 .inherits = &piix_pata_ops,
350 .cable_detect = ich_pata_cable_detect,
351 .set_dmamode = ich_set_dmamode,
352 };
353
354 static struct device_attribute *piix_sidpr_shost_attrs[] = {
355 &dev_attr_link_power_management_policy,
356 NULL
357 };
358
359 static struct scsi_host_template piix_sidpr_sht = {
360 ATA_BMDMA_SHT(DRV_NAME),
361 .shost_attrs = piix_sidpr_shost_attrs,
362 };
363
364 static struct ata_port_operations piix_sidpr_sata_ops = {
365 .inherits = &piix_sata_ops,
366 .hardreset = sata_std_hardreset,
367 .scr_read = piix_sidpr_scr_read,
368 .scr_write = piix_sidpr_scr_write,
369 .set_lpm = piix_sidpr_set_lpm,
370 };
371
372 static const struct piix_map_db ich5_map_db = {
373 .mask = 0x7,
374 .port_enable = 0x3,
375 .map = {
376 /* PM PS SM SS MAP */
377 { P0, NA, P1, NA }, /* 000b */
378 { P1, NA, P0, NA }, /* 001b */
379 { RV, RV, RV, RV },
380 { RV, RV, RV, RV },
381 { P0, P1, IDE, IDE }, /* 100b */
382 { P1, P0, IDE, IDE }, /* 101b */
383 { IDE, IDE, P0, P1 }, /* 110b */
384 { IDE, IDE, P1, P0 }, /* 111b */
385 },
386 };
387
388 static const struct piix_map_db ich6_map_db = {
389 .mask = 0x3,
390 .port_enable = 0xf,
391 .map = {
392 /* PM PS SM SS MAP */
393 { P0, P2, P1, P3 }, /* 00b */
394 { IDE, IDE, P1, P3 }, /* 01b */
395 { P0, P2, IDE, IDE }, /* 10b */
396 { RV, RV, RV, RV },
397 },
398 };
399
400 static const struct piix_map_db ich6m_map_db = {
401 .mask = 0x3,
402 .port_enable = 0x5,
403
404 /* Map 01b isn't specified in the doc but some notebooks use
405 * it anyway. MAP 01b have been spotted on both ICH6M and
406 * ICH7M.
407 */
408 .map = {
409 /* PM PS SM SS MAP */
410 { P0, P2, NA, NA }, /* 00b */
411 { IDE, IDE, P1, P3 }, /* 01b */
412 { P0, P2, IDE, IDE }, /* 10b */
413 { RV, RV, RV, RV },
414 },
415 };
416
417 static const struct piix_map_db ich8_map_db = {
418 .mask = 0x3,
419 .port_enable = 0xf,
420 .map = {
421 /* PM PS SM SS MAP */
422 { P0, P2, P1, P3 }, /* 00b (hardwired when in AHCI) */
423 { RV, RV, RV, RV },
424 { P0, P2, IDE, IDE }, /* 10b (IDE mode) */
425 { RV, RV, RV, RV },
426 },
427 };
428
429 static const struct piix_map_db ich8_2port_map_db = {
430 .mask = 0x3,
431 .port_enable = 0x3,
432 .map = {
433 /* PM PS SM SS MAP */
434 { P0, NA, P1, NA }, /* 00b */
435 { RV, RV, RV, RV }, /* 01b */
436 { RV, RV, RV, RV }, /* 10b */
437 { RV, RV, RV, RV },
438 },
439 };
440
441 static const struct piix_map_db ich8m_apple_map_db = {
442 .mask = 0x3,
443 .port_enable = 0x1,
444 .map = {
445 /* PM PS SM SS MAP */
446 { P0, NA, NA, NA }, /* 00b */
447 { RV, RV, RV, RV },
448 { P0, P2, IDE, IDE }, /* 10b */
449 { RV, RV, RV, RV },
450 },
451 };
452
453 static const struct piix_map_db tolapai_map_db = {
454 .mask = 0x3,
455 .port_enable = 0x3,
456 .map = {
457 /* PM PS SM SS MAP */
458 { P0, NA, P1, NA }, /* 00b */
459 { RV, RV, RV, RV }, /* 01b */
460 { RV, RV, RV, RV }, /* 10b */
461 { RV, RV, RV, RV },
462 },
463 };
464
465 static const struct piix_map_db *piix_map_db_table[] = {
466 [ich5_sata] = &ich5_map_db,
467 [ich6_sata] = &ich6_map_db,
468 [ich6m_sata] = &ich6m_map_db,
469 [ich8_sata] = &ich8_map_db,
470 [ich8_2port_sata] = &ich8_2port_map_db,
471 [ich8m_apple_sata] = &ich8m_apple_map_db,
472 [tolapai_sata] = &tolapai_map_db,
473 };
474
475 static struct ata_port_info piix_port_info[] = {
476 [piix_pata_mwdma] = /* PIIX3 MWDMA only */
477 {
478 .flags = PIIX_PATA_FLAGS,
479 .pio_mask = ATA_PIO4,
480 .mwdma_mask = ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
481 .port_ops = &piix_pata_ops,
482 },
483
484 [piix_pata_33] = /* PIIX4 at 33MHz */
485 {
486 .flags = PIIX_PATA_FLAGS,
487 .pio_mask = ATA_PIO4,
488 .mwdma_mask = ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
489 .udma_mask = ATA_UDMA2,
490 .port_ops = &piix_pata_ops,
491 },
492
493 [ich_pata_33] = /* ICH0 - ICH at 33Mhz*/
494 {
495 .flags = PIIX_PATA_FLAGS,
496 .pio_mask = ATA_PIO4,
497 .mwdma_mask = ATA_MWDMA12_ONLY, /* Check: maybe MWDMA0 is ok */
498 .udma_mask = ATA_UDMA2,
499 .port_ops = &ich_pata_ops,
500 },
501
502 [ich_pata_66] = /* ICH controllers up to 66MHz */
503 {
504 .flags = PIIX_PATA_FLAGS,
505 .pio_mask = ATA_PIO4,
506 .mwdma_mask = ATA_MWDMA12_ONLY, /* MWDMA0 is broken on chip */
507 .udma_mask = ATA_UDMA4,
508 .port_ops = &ich_pata_ops,
509 },
510
511 [ich_pata_100] =
512 {
513 .flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
514 .pio_mask = ATA_PIO4,
515 .mwdma_mask = ATA_MWDMA12_ONLY,
516 .udma_mask = ATA_UDMA5,
517 .port_ops = &ich_pata_ops,
518 },
519
520 [ich_pata_100_nomwdma1] =
521 {
522 .flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
523 .pio_mask = ATA_PIO4,
524 .mwdma_mask = ATA_MWDMA2_ONLY,
525 .udma_mask = ATA_UDMA5,
526 .port_ops = &ich_pata_ops,
527 },
528
529 [ich5_sata] =
530 {
531 .flags = PIIX_SATA_FLAGS,
532 .pio_mask = ATA_PIO4,
533 .mwdma_mask = ATA_MWDMA2,
534 .udma_mask = ATA_UDMA6,
535 .port_ops = &piix_sata_ops,
536 },
537
538 [ich6_sata] =
539 {
540 .flags = PIIX_SATA_FLAGS,
541 .pio_mask = ATA_PIO4,
542 .mwdma_mask = ATA_MWDMA2,
543 .udma_mask = ATA_UDMA6,
544 .port_ops = &piix_sata_ops,
545 },
546
547 [ich6m_sata] =
548 {
549 .flags = PIIX_SATA_FLAGS,
550 .pio_mask = ATA_PIO4,
551 .mwdma_mask = ATA_MWDMA2,
552 .udma_mask = ATA_UDMA6,
553 .port_ops = &piix_sata_ops,
554 },
555
556 [ich8_sata] =
557 {
558 .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
559 .pio_mask = ATA_PIO4,
560 .mwdma_mask = ATA_MWDMA2,
561 .udma_mask = ATA_UDMA6,
562 .port_ops = &piix_sata_ops,
563 },
564
565 [ich8_2port_sata] =
566 {
567 .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
568 .pio_mask = ATA_PIO4,
569 .mwdma_mask = ATA_MWDMA2,
570 .udma_mask = ATA_UDMA6,
571 .port_ops = &piix_sata_ops,
572 },
573
574 [tolapai_sata] =
575 {
576 .flags = PIIX_SATA_FLAGS,
577 .pio_mask = ATA_PIO4,
578 .mwdma_mask = ATA_MWDMA2,
579 .udma_mask = ATA_UDMA6,
580 .port_ops = &piix_sata_ops,
581 },
582
583 [ich8m_apple_sata] =
584 {
585 .flags = PIIX_SATA_FLAGS,
586 .pio_mask = ATA_PIO4,
587 .mwdma_mask = ATA_MWDMA2,
588 .udma_mask = ATA_UDMA6,
589 .port_ops = &piix_sata_ops,
590 },
591
592 [piix_pata_vmw] =
593 {
594 .flags = PIIX_PATA_FLAGS,
595 .pio_mask = ATA_PIO4,
596 .mwdma_mask = ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
597 .udma_mask = ATA_UDMA2,
598 .port_ops = &piix_vmw_ops,
599 },
600
601 };
602
603 static struct pci_bits piix_enable_bits[] = {
604 { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */
605 { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */
606 };
607
608 MODULE_AUTHOR("Andre Hedrick, Alan Cox, Andrzej Krzysztofowicz, Jeff Garzik");
609 MODULE_DESCRIPTION("SCSI low-level driver for Intel PIIX/ICH ATA controllers");
610 MODULE_LICENSE("GPL");
611 MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
612 MODULE_VERSION(DRV_VERSION);
613
614 struct ich_laptop {
615 u16 device;
616 u16 subvendor;
617 u16 subdevice;
618 };
619
620 /*
621 * List of laptops that use short cables rather than 80 wire
622 */
623
624 static const struct ich_laptop ich_laptop[] = {
625 /* devid, subvendor, subdev */
626 { 0x27DF, 0x0005, 0x0280 }, /* ICH7 on Acer 5602WLMi */
627 { 0x27DF, 0x1025, 0x0102 }, /* ICH7 on Acer 5602aWLMi */
628 { 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */
629 { 0x27DF, 0x1028, 0x02b0 }, /* ICH7 on unknown Dell */
630 { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */
631 { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */
632 { 0x27DF, 0x103C, 0x361a }, /* ICH7 on unknown HP */
633 { 0x27DF, 0x1071, 0xD221 }, /* ICH7 on Hercules EC-900 */
634 { 0x27DF, 0x152D, 0x0778 }, /* ICH7 on unknown Intel */
635 { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */
636 { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */
637 { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */
638 { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */
639 { 0x27df, 0x104d, 0x900e }, /* ICH7 on Sony TZ-90 */
640 /* end marker */
641 { 0, }
642 };
643
644 /**
645 * ich_pata_cable_detect - Probe host controller cable detect info
646 * @ap: Port for which cable detect info is desired
647 *
648 * Read 80c cable indicator from ATA PCI device's PCI config
649 * register. This register is normally set by firmware (BIOS).
650 *
651 * LOCKING:
652 * None (inherited from caller).
653 */
654
655 static int ich_pata_cable_detect(struct ata_port *ap)
656 {
657 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
658 struct piix_host_priv *hpriv = ap->host->private_data;
659 const struct ich_laptop *lap = &ich_laptop[0];
660 u8 mask;
661
662 /* Check for specials - Acer Aspire 5602WLMi */
663 while (lap->device) {
664 if (lap->device == pdev->device &&
665 lap->subvendor == pdev->subsystem_vendor &&
666 lap->subdevice == pdev->subsystem_device)
667 return ATA_CBL_PATA40_SHORT;
668
669 lap++;
670 }
671
672 /* check BIOS cable detect results */
673 mask = ap->port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC;
674 if ((hpriv->saved_iocfg & mask) == 0)
675 return ATA_CBL_PATA40;
676 return ATA_CBL_PATA80;
677 }
678
679 /**
680 * piix_pata_prereset - prereset for PATA host controller
681 * @link: Target link
682 * @deadline: deadline jiffies for the operation
683 *
684 * LOCKING:
685 * None (inherited from caller).
686 */
687 static int piix_pata_prereset(struct ata_link *link, unsigned long deadline)
688 {
689 struct ata_port *ap = link->ap;
690 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
691
692 if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
693 return -ENOENT;
694 return ata_sff_prereset(link, deadline);
695 }
696
697 static DEFINE_SPINLOCK(piix_lock);
698
699 /**
700 * piix_set_piomode - Initialize host controller PATA PIO timings
701 * @ap: Port whose timings we are configuring
702 * @adev: um
703 *
704 * Set PIO mode for device, in host controller PCI config space.
705 *
706 * LOCKING:
707 * None (inherited from caller).
708 */
709
710 static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
711 {
712 struct pci_dev *dev = to_pci_dev(ap->host->dev);
713 unsigned long flags;
714 unsigned int pio = adev->pio_mode - XFER_PIO_0;
715 unsigned int is_slave = (adev->devno != 0);
716 unsigned int master_port= ap->port_no ? 0x42 : 0x40;
717 unsigned int slave_port = 0x44;
718 u16 master_data;
719 u8 slave_data;
720 u8 udma_enable;
721 int control = 0;
722
723 /*
724 * See Intel Document 298600-004 for the timing programing rules
725 * for ICH controllers.
726 */
727
728 static const /* ISP RTC */
729 u8 timings[][2] = { { 0, 0 },
730 { 0, 0 },
731 { 1, 0 },
732 { 2, 1 },
733 { 2, 3 }, };
734
735 if (pio >= 2)
736 control |= 1; /* TIME1 enable */
737 if (ata_pio_need_iordy(adev))
738 control |= 2; /* IE enable */
739
740 /* Intel specifies that the PPE functionality is for disk only */
741 if (adev->class == ATA_DEV_ATA)
742 control |= 4; /* PPE enable */
743
744 spin_lock_irqsave(&piix_lock, flags);
745
746 /* PIO configuration clears DTE unconditionally. It will be
747 * programmed in set_dmamode which is guaranteed to be called
748 * after set_piomode if any DMA mode is available.
749 */
750 pci_read_config_word(dev, master_port, &master_data);
751 if (is_slave) {
752 /* clear TIME1|IE1|PPE1|DTE1 */
753 master_data &= 0xff0f;
754 /* Enable SITRE (separate slave timing register) */
755 master_data |= 0x4000;
756 /* enable PPE1, IE1 and TIME1 as needed */
757 master_data |= (control << 4);
758 pci_read_config_byte(dev, slave_port, &slave_data);
759 slave_data &= (ap->port_no ? 0x0f : 0xf0);
760 /* Load the timing nibble for this slave */
761 slave_data |= ((timings[pio][0] << 2) | timings[pio][1])
762 << (ap->port_no ? 4 : 0);
763 } else {
764 /* clear ISP|RCT|TIME0|IE0|PPE0|DTE0 */
765 master_data &= 0xccf0;
766 /* Enable PPE, IE and TIME as appropriate */
767 master_data |= control;
768 /* load ISP and RCT */
769 master_data |=
770 (timings[pio][0] << 12) |
771 (timings[pio][1] << 8);
772 }
773 pci_write_config_word(dev, master_port, master_data);
774 if (is_slave)
775 pci_write_config_byte(dev, slave_port, slave_data);
776
777 /* Ensure the UDMA bit is off - it will be turned back on if
778 UDMA is selected */
779
780 if (ap->udma_mask) {
781 pci_read_config_byte(dev, 0x48, &udma_enable);
782 udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
783 pci_write_config_byte(dev, 0x48, udma_enable);
784 }
785
786 spin_unlock_irqrestore(&piix_lock, flags);
787 }
788
789 /**
790 * do_pata_set_dmamode - Initialize host controller PATA PIO timings
791 * @ap: Port whose timings we are configuring
792 * @adev: Drive in question
793 * @isich: set if the chip is an ICH device
794 *
795 * Set UDMA mode for device, in host controller PCI config space.
796 *
797 * LOCKING:
798 * None (inherited from caller).
799 */
800
801 static void do_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev, int isich)
802 {
803 struct pci_dev *dev = to_pci_dev(ap->host->dev);
804 unsigned long flags;
805 u8 master_port = ap->port_no ? 0x42 : 0x40;
806 u16 master_data;
807 u8 speed = adev->dma_mode;
808 int devid = adev->devno + 2 * ap->port_no;
809 u8 udma_enable = 0;
810
811 static const /* ISP RTC */
812 u8 timings[][2] = { { 0, 0 },
813 { 0, 0 },
814 { 1, 0 },
815 { 2, 1 },
816 { 2, 3 }, };
817
818 spin_lock_irqsave(&piix_lock, flags);
819
820 pci_read_config_word(dev, master_port, &master_data);
821 if (ap->udma_mask)
822 pci_read_config_byte(dev, 0x48, &udma_enable);
823
824 if (speed >= XFER_UDMA_0) {
825 unsigned int udma = adev->dma_mode - XFER_UDMA_0;
826 u16 udma_timing;
827 u16 ideconf;
828 int u_clock, u_speed;
829
830 /*
831 * UDMA is handled by a combination of clock switching and
832 * selection of dividers
833 *
834 * Handy rule: Odd modes are UDMATIMx 01, even are 02
835 * except UDMA0 which is 00
836 */
837 u_speed = min(2 - (udma & 1), udma);
838 if (udma == 5)
839 u_clock = 0x1000; /* 100Mhz */
840 else if (udma > 2)
841 u_clock = 1; /* 66Mhz */
842 else
843 u_clock = 0; /* 33Mhz */
844
845 udma_enable |= (1 << devid);
846
847 /* Load the CT/RP selection */
848 pci_read_config_word(dev, 0x4A, &udma_timing);
849 udma_timing &= ~(3 << (4 * devid));
850 udma_timing |= u_speed << (4 * devid);
851 pci_write_config_word(dev, 0x4A, udma_timing);
852
853 if (isich) {
854 /* Select a 33/66/100Mhz clock */
855 pci_read_config_word(dev, 0x54, &ideconf);
856 ideconf &= ~(0x1001 << devid);
857 ideconf |= u_clock << devid;
858 /* For ICH or later we should set bit 10 for better
859 performance (WR_PingPong_En) */
860 pci_write_config_word(dev, 0x54, ideconf);
861 }
862 } else {
863 /*
864 * MWDMA is driven by the PIO timings. We must also enable
865 * IORDY unconditionally along with TIME1. PPE has already
866 * been set when the PIO timing was set.
867 */
868 unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0;
869 unsigned int control;
870 u8 slave_data;
871 const unsigned int needed_pio[3] = {
872 XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
873 };
874 int pio = needed_pio[mwdma] - XFER_PIO_0;
875
876 control = 3; /* IORDY|TIME1 */
877
878 /* If the drive MWDMA is faster than it can do PIO then
879 we must force PIO into PIO0 */
880
881 if (adev->pio_mode < needed_pio[mwdma])
882 /* Enable DMA timing only */
883 control |= 8; /* PIO cycles in PIO0 */
884
885 if (adev->devno) { /* Slave */
886 master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */
887 master_data |= control << 4;
888 pci_read_config_byte(dev, 0x44, &slave_data);
889 slave_data &= (ap->port_no ? 0x0f : 0xf0);
890 /* Load the matching timing */
891 slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
892 pci_write_config_byte(dev, 0x44, slave_data);
893 } else { /* Master */
894 master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY
895 and master timing bits */
896 master_data |= control;
897 master_data |=
898 (timings[pio][0] << 12) |
899 (timings[pio][1] << 8);
900 }
901
902 if (ap->udma_mask)
903 udma_enable &= ~(1 << devid);
904
905 pci_write_config_word(dev, master_port, master_data);
906 }
907 /* Don't scribble on 0x48 if the controller does not support UDMA */
908 if (ap->udma_mask)
909 pci_write_config_byte(dev, 0x48, udma_enable);
910
911 spin_unlock_irqrestore(&piix_lock, flags);
912 }
913
914 /**
915 * piix_set_dmamode - Initialize host controller PATA DMA timings
916 * @ap: Port whose timings we are configuring
917 * @adev: um
918 *
919 * Set MW/UDMA mode for device, in host controller PCI config space.
920 *
921 * LOCKING:
922 * None (inherited from caller).
923 */
924
925 static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev)
926 {
927 do_pata_set_dmamode(ap, adev, 0);
928 }
929
930 /**
931 * ich_set_dmamode - Initialize host controller PATA DMA timings
932 * @ap: Port whose timings we are configuring
933 * @adev: um
934 *
935 * Set MW/UDMA mode for device, in host controller PCI config space.
936 *
937 * LOCKING:
938 * None (inherited from caller).
939 */
940
941 static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev)
942 {
943 do_pata_set_dmamode(ap, adev, 1);
944 }
945
946 /*
947 * Serial ATA Index/Data Pair Superset Registers access
948 *
949 * Beginning from ICH8, there's a sane way to access SCRs using index
950 * and data register pair located at BAR5 which means that we have
951 * separate SCRs for master and slave. This is handled using libata
952 * slave_link facility.
953 */
954 static const int piix_sidx_map[] = {
955 [SCR_STATUS] = 0,
956 [SCR_ERROR] = 2,
957 [SCR_CONTROL] = 1,
958 };
959
960 static void piix_sidpr_sel(struct ata_link *link, unsigned int reg)
961 {
962 struct ata_port *ap = link->ap;
963 struct piix_host_priv *hpriv = ap->host->private_data;
964
965 iowrite32(((ap->port_no * 2 + link->pmp) << 8) | piix_sidx_map[reg],
966 hpriv->sidpr + PIIX_SIDPR_IDX);
967 }
968
969 static int piix_sidpr_scr_read(struct ata_link *link,
970 unsigned int reg, u32 *val)
971 {
972 struct piix_host_priv *hpriv = link->ap->host->private_data;
973
974 if (reg >= ARRAY_SIZE(piix_sidx_map))
975 return -EINVAL;
976
977 piix_sidpr_sel(link, reg);
978 *val = ioread32(hpriv->sidpr + PIIX_SIDPR_DATA);
979 return 0;
980 }
981
982 static int piix_sidpr_scr_write(struct ata_link *link,
983 unsigned int reg, u32 val)
984 {
985 struct piix_host_priv *hpriv = link->ap->host->private_data;
986
987 if (reg >= ARRAY_SIZE(piix_sidx_map))
988 return -EINVAL;
989
990 piix_sidpr_sel(link, reg);
991 iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA);
992 return 0;
993 }
994
995 static int piix_sidpr_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
996 unsigned hints)
997 {
998 return sata_link_scr_lpm(link, policy, false);
999 }
1000
1001 static bool piix_irq_check(struct ata_port *ap)
1002 {
1003 if (unlikely(!ap->ioaddr.bmdma_addr))
1004 return false;
1005
1006 return ap->ops->bmdma_status(ap) & ATA_DMA_INTR;
1007 }
1008
1009 #ifdef CONFIG_PM
1010 static int piix_broken_suspend(void)
1011 {
1012 static const struct dmi_system_id sysids[] = {
1013 {
1014 .ident = "TECRA M3",
1015 .matches = {
1016 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
1017 DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M3"),
1018 },
1019 },
1020 {
1021 .ident = "TECRA M3",
1022 .matches = {
1023 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
1024 DMI_MATCH(DMI_PRODUCT_NAME, "Tecra M3"),
1025 },
1026 },
1027 {
1028 .ident = "TECRA M4",
1029 .matches = {
1030 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
1031 DMI_MATCH(DMI_PRODUCT_NAME, "Tecra M4"),
1032 },
1033 },
1034 {
1035 .ident = "TECRA M4",
1036 .matches = {
1037 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
1038 DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M4"),
1039 },
1040 },
1041 {
1042 .ident = "TECRA M5",
1043 .matches = {
1044 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
1045 DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M5"),
1046 },
1047 },
1048 {
1049 .ident = "TECRA M6",
1050 .matches = {
1051 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
1052 DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M6"),
1053 },
1054 },
1055 {
1056 .ident = "TECRA M7",
1057 .matches = {
1058 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
1059 DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M7"),
1060 },
1061 },
1062 {
1063 .ident = "TECRA A8",
1064 .matches = {
1065 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
1066 DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A8"),
1067 },
1068 },
1069 {
1070 .ident = "Satellite R20",
1071 .matches = {
1072 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
1073 DMI_MATCH(DMI_PRODUCT_NAME, "Satellite R20"),
1074 },
1075 },
1076 {
1077 .ident = "Satellite R25",
1078 .matches = {
1079 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
1080 DMI_MATCH(DMI_PRODUCT_NAME, "Satellite R25"),
1081 },
1082 },
1083 {
1084 .ident = "Satellite U200",
1085 .matches = {
1086 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
1087 DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U200"),
1088 },
1089 },
1090 {
1091 .ident = "Satellite U200",
1092 .matches = {
1093 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
1094 DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE U200"),
1095 },
1096 },
1097 {
1098 .ident = "Satellite Pro U200",
1099 .matches = {
1100 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
1101 DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE PRO U200"),
1102 },
1103 },
1104 {
1105 .ident = "Satellite U205",
1106 .matches = {
1107 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
1108 DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U205"),
1109 },
1110 },
1111 {
1112 .ident = "SATELLITE U205",
1113 .matches = {
1114 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
1115 DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE U205"),
1116 },
1117 },
1118 {
1119 .ident = "Portege M500",
1120 .matches = {
1121 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
1122 DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M500"),
1123 },
1124 },
1125 {
1126 .ident = "VGN-BX297XP",
1127 .matches = {
1128 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
1129 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-BX297XP"),
1130 },
1131 },
1132
1133 { } /* terminate list */
1134 };
1135 static const char *oemstrs[] = {
1136 "Tecra M3,",
1137 };
1138 int i;
1139
1140 if (dmi_check_system(sysids))
1141 return 1;
1142
1143 for (i = 0; i < ARRAY_SIZE(oemstrs); i++)
1144 if (dmi_find_device(DMI_DEV_TYPE_OEM_STRING, oemstrs[i], NULL))
1145 return 1;
1146
1147 /* TECRA M4 sometimes forgets its identify and reports bogus
1148 * DMI information. As the bogus information is a bit
1149 * generic, match as many entries as possible. This manual
1150 * matching is necessary because dmi_system_id.matches is
1151 * limited to four entries.
1152 */
1153 if (dmi_match(DMI_SYS_VENDOR, "TOSHIBA") &&
1154 dmi_match(DMI_PRODUCT_NAME, "000000") &&
1155 dmi_match(DMI_PRODUCT_VERSION, "000000") &&
1156 dmi_match(DMI_PRODUCT_SERIAL, "000000") &&
1157 dmi_match(DMI_BOARD_VENDOR, "TOSHIBA") &&
1158 dmi_match(DMI_BOARD_NAME, "Portable PC") &&
1159 dmi_match(DMI_BOARD_VERSION, "Version A0"))
1160 return 1;
1161
1162 return 0;
1163 }
1164
1165 static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
1166 {
1167 struct ata_host *host = dev_get_drvdata(&pdev->dev);
1168 unsigned long flags;
1169 int rc = 0;
1170
1171 rc = ata_host_suspend(host, mesg);
1172 if (rc)
1173 return rc;
1174
1175 /* Some braindamaged ACPI suspend implementations expect the
1176 * controller to be awake on entry; otherwise, it burns cpu
1177 * cycles and power trying to do something to the sleeping
1178 * beauty.
1179 */
1180 if (piix_broken_suspend() && (mesg.event & PM_EVENT_SLEEP)) {
1181 pci_save_state(pdev);
1182
1183 /* mark its power state as "unknown", since we don't
1184 * know if e.g. the BIOS will change its device state
1185 * when we suspend.
1186 */
1187 if (pdev->current_state == PCI_D0)
1188 pdev->current_state = PCI_UNKNOWN;
1189
1190 /* tell resume that it's waking up from broken suspend */
1191 spin_lock_irqsave(&host->lock, flags);
1192 host->flags |= PIIX_HOST_BROKEN_SUSPEND;
1193 spin_unlock_irqrestore(&host->lock, flags);
1194 } else
1195 ata_pci_device_do_suspend(pdev, mesg);
1196
1197 return 0;
1198 }
1199
1200 static int piix_pci_device_resume(struct pci_dev *pdev)
1201 {
1202 struct ata_host *host = dev_get_drvdata(&pdev->dev);
1203 unsigned long flags;
1204 int rc;
1205
1206 if (host->flags & PIIX_HOST_BROKEN_SUSPEND) {
1207 spin_lock_irqsave(&host->lock, flags);
1208 host->flags &= ~PIIX_HOST_BROKEN_SUSPEND;
1209 spin_unlock_irqrestore(&host->lock, flags);
1210
1211 pci_set_power_state(pdev, PCI_D0);
1212 pci_restore_state(pdev);
1213
1214 /* PCI device wasn't disabled during suspend. Use
1215 * pci_reenable_device() to avoid affecting the enable
1216 * count.
1217 */
1218 rc = pci_reenable_device(pdev);
1219 if (rc)
1220 dev_printk(KERN_ERR, &pdev->dev, "failed to enable "
1221 "device after resume (%d)\n", rc);
1222 } else
1223 rc = ata_pci_device_do_resume(pdev);
1224
1225 if (rc == 0)
1226 ata_host_resume(host);
1227
1228 return rc;
1229 }
1230 #endif
1231
1232 static u8 piix_vmw_bmdma_status(struct ata_port *ap)
1233 {
1234 return ata_bmdma_status(ap) & ~ATA_DMA_ERR;
1235 }
1236
1237 #define AHCI_PCI_BAR 5
1238 #define AHCI_GLOBAL_CTL 0x04
1239 #define AHCI_ENABLE (1 << 31)
1240 static int piix_disable_ahci(struct pci_dev *pdev)
1241 {
1242 void __iomem *mmio;
1243 u32 tmp;
1244 int rc = 0;
1245
1246 /* BUG: pci_enable_device has not yet been called. This
1247 * works because this device is usually set up by BIOS.
1248 */
1249
1250 if (!pci_resource_start(pdev, AHCI_PCI_BAR) ||
1251 !pci_resource_len(pdev, AHCI_PCI_BAR))
1252 return 0;
1253
1254 mmio = pci_iomap(pdev, AHCI_PCI_BAR, 64);
1255 if (!mmio)
1256 return -ENOMEM;
1257
1258 tmp = ioread32(mmio + AHCI_GLOBAL_CTL);
1259 if (tmp & AHCI_ENABLE) {
1260 tmp &= ~AHCI_ENABLE;
1261 iowrite32(tmp, mmio + AHCI_GLOBAL_CTL);
1262
1263 tmp = ioread32(mmio + AHCI_GLOBAL_CTL);
1264 if (tmp & AHCI_ENABLE)
1265 rc = -EIO;
1266 }
1267
1268 pci_iounmap(pdev, mmio);
1269 return rc;
1270 }
1271
1272 /**
1273 * piix_check_450nx_errata - Check for problem 450NX setup
1274 * @ata_dev: the PCI device to check
1275 *
1276 * Check for the present of 450NX errata #19 and errata #25. If
1277 * they are found return an error code so we can turn off DMA
1278 */
1279
1280 static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev)
1281 {
1282 struct pci_dev *pdev = NULL;
1283 u16 cfg;
1284 int no_piix_dma = 0;
1285
1286 while ((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL) {
1287 /* Look for 450NX PXB. Check for problem configurations
1288 A PCI quirk checks bit 6 already */
1289 pci_read_config_word(pdev, 0x41, &cfg);
1290 /* Only on the original revision: IDE DMA can hang */
1291 if (pdev->revision == 0x00)
1292 no_piix_dma = 1;
1293 /* On all revisions below 5 PXB bus lock must be disabled for IDE */
1294 else if (cfg & (1<<14) && pdev->revision < 5)
1295 no_piix_dma = 2;
1296 }
1297 if (no_piix_dma)
1298 dev_printk(KERN_WARNING, &ata_dev->dev, "450NX errata present, disabling IDE DMA.\n");
1299 if (no_piix_dma == 2)
1300 dev_printk(KERN_WARNING, &ata_dev->dev, "A BIOS update may resolve this.\n");
1301 return no_piix_dma;
1302 }
1303
1304 static void __devinit piix_init_pcs(struct ata_host *host,
1305 const struct piix_map_db *map_db)
1306 {
1307 struct pci_dev *pdev = to_pci_dev(host->dev);
1308 u16 pcs, new_pcs;
1309
1310 pci_read_config_word(pdev, ICH5_PCS, &pcs);
1311
1312 new_pcs = pcs | map_db->port_enable;
1313
1314 if (new_pcs != pcs) {
1315 DPRINTK("updating PCS from 0x%x to 0x%x\n", pcs, new_pcs);
1316 pci_write_config_word(pdev, ICH5_PCS, new_pcs);
1317 msleep(150);
1318 }
1319 }
1320
1321 static const int *__devinit piix_init_sata_map(struct pci_dev *pdev,
1322 struct ata_port_info *pinfo,
1323 const struct piix_map_db *map_db)
1324 {
1325 const int *map;
1326 int i, invalid_map = 0;
1327 u8 map_value;
1328
1329 pci_read_config_byte(pdev, ICH5_PMR, &map_value);
1330
1331 map = map_db->map[map_value & map_db->mask];
1332
1333 dev_printk(KERN_INFO, &pdev->dev, "MAP [");
1334 for (i = 0; i < 4; i++) {
1335 switch (map[i]) {
1336 case RV:
1337 invalid_map = 1;
1338 printk(" XX");
1339 break;
1340
1341 case NA:
1342 printk(" --");
1343 break;
1344
1345 case IDE:
1346 WARN_ON((i & 1) || map[i + 1] != IDE);
1347 pinfo[i / 2] = piix_port_info[ich_pata_100];
1348 i++;
1349 printk(" IDE IDE");
1350 break;
1351
1352 default:
1353 printk(" P%d", map[i]);
1354 if (i & 1)
1355 pinfo[i / 2].flags |= ATA_FLAG_SLAVE_POSS;
1356 break;
1357 }
1358 }
1359 printk(" ]\n");
1360
1361 if (invalid_map)
1362 dev_printk(KERN_ERR, &pdev->dev,
1363 "invalid MAP value %u\n", map_value);
1364
1365 return map;
1366 }
1367
1368 static bool piix_no_sidpr(struct ata_host *host)
1369 {
1370 struct pci_dev *pdev = to_pci_dev(host->dev);
1371
1372 /*
1373 * Samsung DB-P70 only has three ATA ports exposed and
1374 * curiously the unconnected first port reports link online
1375 * while not responding to SRST protocol causing excessive
1376 * detection delay.
1377 *
1378 * Unfortunately, the system doesn't carry enough DMI
1379 * information to identify the machine but does have subsystem
1380 * vendor and device set. As it's unclear whether the
1381 * subsystem vendor/device is used only for this specific
1382 * board, the port can't be disabled solely with the
1383 * information; however, turning off SIDPR access works around
1384 * the problem. Turn it off.
1385 *
1386 * This problem is reported in bnc#441240.
1387 *
1388 * https://bugzilla.novell.com/show_bug.cgi?id=441420
1389 */
1390 if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2920 &&
1391 pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG &&
1392 pdev->subsystem_device == 0xb049) {
1393 dev_printk(KERN_WARNING, host->dev,
1394 "Samsung DB-P70 detected, disabling SIDPR\n");
1395 return true;
1396 }
1397
1398 return false;
1399 }
1400
1401 static int __devinit piix_init_sidpr(struct ata_host *host)
1402 {
1403 struct pci_dev *pdev = to_pci_dev(host->dev);
1404 struct piix_host_priv *hpriv = host->private_data;
1405 struct ata_link *link0 = &host->ports[0]->link;
1406 u32 scontrol;
1407 int i, rc;
1408
1409 /* check for availability */
1410 for (i = 0; i < 4; i++)
1411 if (hpriv->map[i] == IDE)
1412 return 0;
1413
1414 /* is it blacklisted? */
1415 if (piix_no_sidpr(host))
1416 return 0;
1417
1418 if (!(host->ports[0]->flags & PIIX_FLAG_SIDPR))
1419 return 0;
1420
1421 if (pci_resource_start(pdev, PIIX_SIDPR_BAR) == 0 ||
1422 pci_resource_len(pdev, PIIX_SIDPR_BAR) != PIIX_SIDPR_LEN)
1423 return 0;
1424
1425 if (pcim_iomap_regions(pdev, 1 << PIIX_SIDPR_BAR, DRV_NAME))
1426 return 0;
1427
1428 hpriv->sidpr = pcim_iomap_table(pdev)[PIIX_SIDPR_BAR];
1429
1430 /* SCR access via SIDPR doesn't work on some configurations.
1431 * Give it a test drive by inhibiting power save modes which
1432 * we'll do anyway.
1433 */
1434 piix_sidpr_scr_read(link0, SCR_CONTROL, &scontrol);
1435
1436 /* if IPM is already 3, SCR access is probably working. Don't
1437 * un-inhibit power save modes as BIOS might have inhibited
1438 * them for a reason.
1439 */
1440 if ((scontrol & 0xf00) != 0x300) {
1441 scontrol |= 0x300;
1442 piix_sidpr_scr_write(link0, SCR_CONTROL, scontrol);
1443 piix_sidpr_scr_read(link0, SCR_CONTROL, &scontrol);
1444
1445 if ((scontrol & 0xf00) != 0x300) {
1446 dev_printk(KERN_INFO, host->dev, "SCR access via "
1447 "SIDPR is available but doesn't work\n");
1448 return 0;
1449 }
1450 }
1451
1452 /* okay, SCRs available, set ops and ask libata for slave_link */
1453 for (i = 0; i < 2; i++) {
1454 struct ata_port *ap = host->ports[i];
1455
1456 ap->ops = &piix_sidpr_sata_ops;
1457
1458 if (ap->flags & ATA_FLAG_SLAVE_POSS) {
1459 rc = ata_slave_link_init(ap);
1460 if (rc)
1461 return rc;
1462 }
1463 }
1464
1465 return 0;
1466 }
1467
1468 static void piix_iocfg_bit18_quirk(struct ata_host *host)
1469 {
1470 static const struct dmi_system_id sysids[] = {
1471 {
1472 /* Clevo M570U sets IOCFG bit 18 if the cdrom
1473 * isn't used to boot the system which
1474 * disables the channel.
1475 */
1476 .ident = "M570U",
1477 .matches = {
1478 DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."),
1479 DMI_MATCH(DMI_PRODUCT_NAME, "M570U"),
1480 },
1481 },
1482
1483 { } /* terminate list */
1484 };
1485 struct pci_dev *pdev = to_pci_dev(host->dev);
1486 struct piix_host_priv *hpriv = host->private_data;
1487
1488 if (!dmi_check_system(sysids))
1489 return;
1490
1491 /* The datasheet says that bit 18 is NOOP but certain systems
1492 * seem to use it to disable a channel. Clear the bit on the
1493 * affected systems.
1494 */
1495 if (hpriv->saved_iocfg & (1 << 18)) {
1496 dev_printk(KERN_INFO, &pdev->dev,
1497 "applying IOCFG bit18 quirk\n");
1498 pci_write_config_dword(pdev, PIIX_IOCFG,
1499 hpriv->saved_iocfg & ~(1 << 18));
1500 }
1501 }
1502
1503 static bool piix_broken_system_poweroff(struct pci_dev *pdev)
1504 {
1505 static const struct dmi_system_id broken_systems[] = {
1506 {
1507 .ident = "HP Compaq 2510p",
1508 .matches = {
1509 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
1510 DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 2510p"),
1511 },
1512 /* PCI slot number of the controller */
1513 .driver_data = (void *)0x1FUL,
1514 },
1515 {
1516 .ident = "HP Compaq nc6000",
1517 .matches = {
1518 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
1519 DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nc6000"),
1520 },
1521 /* PCI slot number of the controller */
1522 .driver_data = (void *)0x1FUL,
1523 },
1524
1525 { } /* terminate list */
1526 };
1527 const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
1528
1529 if (dmi) {
1530 unsigned long slot = (unsigned long)dmi->driver_data;
1531 /* apply the quirk only to on-board controllers */
1532 return slot == PCI_SLOT(pdev->devfn);
1533 }
1534
1535 return false;
1536 }
1537
1538 /**
1539 * piix_init_one - Register PIIX ATA PCI device with kernel services
1540 * @pdev: PCI device to register
1541 * @ent: Entry in piix_pci_tbl matching with @pdev
1542 *
1543 * Called from kernel PCI layer. We probe for combined mode (sigh),
1544 * and then hand over control to libata, for it to do the rest.
1545 *
1546 * LOCKING:
1547 * Inherited from PCI layer (may sleep).
1548 *
1549 * RETURNS:
1550 * Zero on success, or -ERRNO value.
1551 */
1552
1553 static int __devinit piix_init_one(struct pci_dev *pdev,
1554 const struct pci_device_id *ent)
1555 {
1556 static int printed_version;
1557 struct device *dev = &pdev->dev;
1558 struct ata_port_info port_info[2];
1559 const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] };
1560 struct scsi_host_template *sht = &piix_sht;
1561 unsigned long port_flags;
1562 struct ata_host *host;
1563 struct piix_host_priv *hpriv;
1564 int rc;
1565
1566 if (!printed_version++)
1567 dev_printk(KERN_DEBUG, &pdev->dev,
1568 "version " DRV_VERSION "\n");
1569
1570 /* no hotplugging support for later devices (FIXME) */
1571 if (!in_module_init && ent->driver_data >= ich5_sata)
1572 return -ENODEV;
1573
1574 if (piix_broken_system_poweroff(pdev)) {
1575 piix_port_info[ent->driver_data].flags |=
1576 ATA_FLAG_NO_POWEROFF_SPINDOWN |
1577 ATA_FLAG_NO_HIBERNATE_SPINDOWN;
1578 dev_info(&pdev->dev, "quirky BIOS, skipping spindown "
1579 "on poweroff and hibernation\n");
1580 }
1581
1582 port_info[0] = piix_port_info[ent->driver_data];
1583 port_info[1] = piix_port_info[ent->driver_data];
1584
1585 port_flags = port_info[0].flags;
1586
1587 /* enable device and prepare host */
1588 rc = pcim_enable_device(pdev);
1589 if (rc)
1590 return rc;
1591
1592 hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
1593 if (!hpriv)
1594 return -ENOMEM;
1595
1596 /* Save IOCFG, this will be used for cable detection, quirk
1597 * detection and restoration on detach. This is necessary
1598 * because some ACPI implementations mess up cable related
1599 * bits on _STM. Reported on kernel bz#11879.
1600 */
1601 pci_read_config_dword(pdev, PIIX_IOCFG, &hpriv->saved_iocfg);
1602
1603 /* ICH6R may be driven by either ata_piix or ahci driver
1604 * regardless of BIOS configuration. Make sure AHCI mode is
1605 * off.
1606 */
1607 if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2652) {
1608 rc = piix_disable_ahci(pdev);
1609 if (rc)
1610 return rc;
1611 }
1612
1613 /* SATA map init can change port_info, do it before prepping host */
1614 if (port_flags & ATA_FLAG_SATA)
1615 hpriv->map = piix_init_sata_map(pdev, port_info,
1616 piix_map_db_table[ent->driver_data]);
1617
1618 rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
1619 if (rc)
1620 return rc;
1621 host->private_data = hpriv;
1622
1623 /* initialize controller */
1624 if (port_flags & ATA_FLAG_SATA) {
1625 piix_init_pcs(host, piix_map_db_table[ent->driver_data]);
1626 rc = piix_init_sidpr(host);
1627 if (rc)
1628 return rc;
1629 if (host->ports[0]->ops == &piix_sidpr_sata_ops)
1630 sht = &piix_sidpr_sht;
1631 }
1632
1633 /* apply IOCFG bit18 quirk */
1634 piix_iocfg_bit18_quirk(host);
1635
1636 /* On ICH5, some BIOSen disable the interrupt using the
1637 * PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3.
1638 * On ICH6, this bit has the same effect, but only when
1639 * MSI is disabled (and it is disabled, as we don't use
1640 * message-signalled interrupts currently).
1641 */
1642 if (port_flags & PIIX_FLAG_CHECKINTR)
1643 pci_intx(pdev, 1);
1644
1645 if (piix_check_450nx_errata(pdev)) {
1646 /* This writes into the master table but it does not
1647 really matter for this errata as we will apply it to
1648 all the PIIX devices on the board */
1649 host->ports[0]->mwdma_mask = 0;
1650 host->ports[0]->udma_mask = 0;
1651 host->ports[1]->mwdma_mask = 0;
1652 host->ports[1]->udma_mask = 0;
1653 }
1654 host->flags |= ATA_HOST_PARALLEL_SCAN;
1655
1656 pci_set_master(pdev);
1657 return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht);
1658 }
1659
1660 static void piix_remove_one(struct pci_dev *pdev)
1661 {
1662 struct ata_host *host = dev_get_drvdata(&pdev->dev);
1663 struct piix_host_priv *hpriv = host->private_data;
1664
1665 pci_write_config_dword(pdev, PIIX_IOCFG, hpriv->saved_iocfg);
1666
1667 ata_pci_remove_one(pdev);
1668 }
1669
1670 static int __init piix_init(void)
1671 {
1672 int rc;
1673
1674 DPRINTK("pci_register_driver\n");
1675 rc = pci_register_driver(&piix_pci_driver);
1676 if (rc)
1677 return rc;
1678
1679 in_module_init = 0;
1680
1681 DPRINTK("done\n");
1682 return 0;
1683 }
1684
1685 static void __exit piix_exit(void)
1686 {
1687 pci_unregister_driver(&piix_pci_driver);
1688 }
1689
1690 module_init(piix_init);
1691 module_exit(piix_exit);
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree