[SCSI] lpfc 8.3.17: Replace function reset methodology
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / mfd / stmpe.h
blob0dbdc4e8cd77037ac0d8b2b6c17164af04495773
1 /*
2 * Copyright (C) ST-Ericsson SA 2010
4 * License Terms: GNU General Public License, version 2
5 * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
6 */
8 #ifndef __STMPE_H
9 #define __STMPE_H
11 #ifdef STMPE_DUMP_BYTES
12 static inline void stmpe_dump_bytes(const char *str, const void *buf,
13 size_t len)
15 print_hex_dump_bytes(str, DUMP_PREFIX_OFFSET, buf, len);
17 #else
18 static inline void stmpe_dump_bytes(const char *str, const void *buf,
19 size_t len)
22 #endif
24 /**
25 * struct stmpe_variant_block - information about block
26 * @cell: base mfd cell
27 * @irq: interrupt number to be added to each IORESOURCE_IRQ
28 * in the cell
29 * @block: block id; used for identification with platform data and for
30 * enable and altfunc callbacks
32 struct stmpe_variant_block {
33 struct mfd_cell *cell;
34 int irq;
35 enum stmpe_block block;
38 /**
39 * struct stmpe_variant_info - variant-specific information
40 * @name: part name
41 * @id_val: content of CHIPID register
42 * @id_mask: bits valid in CHIPID register for comparison with id_val
43 * @num_gpios: number of GPIOS
44 * @af_bits: number of bits used to specify the alternate function
45 * @blocks: list of blocks present on this device
46 * @num_blocks: number of blocks present on this device
47 * @num_irqs: number of internal IRQs available on this device
48 * @enable: callback to enable the specified blocks.
49 * Called with the I/O lock held.
50 * @get_altfunc: callback to get the alternate function number for the
51 * specific block
52 * @enable_autosleep: callback to configure autosleep with specified timeout
54 struct stmpe_variant_info {
55 const char *name;
56 u16 id_val;
57 u16 id_mask;
58 int num_gpios;
59 int af_bits;
60 const u8 *regs;
61 struct stmpe_variant_block *blocks;
62 int num_blocks;
63 int num_irqs;
64 int (*enable)(struct stmpe *stmpe, unsigned int blocks, bool enable);
65 int (*get_altfunc)(struct stmpe *stmpe, enum stmpe_block block);
66 int (*enable_autosleep)(struct stmpe *stmpe, int autosleep_timeout);
69 #define STMPE_ICR_LSB_HIGH (1 << 2)
70 #define STMPE_ICR_LSB_EDGE (1 << 1)
71 #define STMPE_ICR_LSB_GIM (1 << 0)
74 * STMPE811
77 #define STMPE811_IRQ_TOUCH_DET 0
78 #define STMPE811_IRQ_FIFO_TH 1
79 #define STMPE811_IRQ_FIFO_OFLOW 2
80 #define STMPE811_IRQ_FIFO_FULL 3
81 #define STMPE811_IRQ_FIFO_EMPTY 4
82 #define STMPE811_IRQ_TEMP_SENS 5
83 #define STMPE811_IRQ_ADC 6
84 #define STMPE811_IRQ_GPIOC 7
85 #define STMPE811_NR_INTERNAL_IRQS 8
87 #define STMPE811_REG_CHIP_ID 0x00
88 #define STMPE811_REG_SYS_CTRL2 0x04
89 #define STMPE811_REG_INT_CTRL 0x09
90 #define STMPE811_REG_INT_EN 0x0A
91 #define STMPE811_REG_INT_STA 0x0B
92 #define STMPE811_REG_GPIO_INT_EN 0x0C
93 #define STMPE811_REG_GPIO_INT_STA 0x0D
94 #define STMPE811_REG_GPIO_SET_PIN 0x10
95 #define STMPE811_REG_GPIO_CLR_PIN 0x11
96 #define STMPE811_REG_GPIO_MP_STA 0x12
97 #define STMPE811_REG_GPIO_DIR 0x13
98 #define STMPE811_REG_GPIO_ED 0x14
99 #define STMPE811_REG_GPIO_RE 0x15
100 #define STMPE811_REG_GPIO_FE 0x16
101 #define STMPE811_REG_GPIO_AF 0x17
103 #define STMPE811_SYS_CTRL2_ADC_OFF (1 << 0)
104 #define STMPE811_SYS_CTRL2_TSC_OFF (1 << 1)
105 #define STMPE811_SYS_CTRL2_GPIO_OFF (1 << 2)
106 #define STMPE811_SYS_CTRL2_TS_OFF (1 << 3)
109 * STMPE1601
112 #define STMPE1601_IRQ_GPIOC 8
113 #define STMPE1601_IRQ_PWM3 7
114 #define STMPE1601_IRQ_PWM2 6
115 #define STMPE1601_IRQ_PWM1 5
116 #define STMPE1601_IRQ_PWM0 4
117 #define STMPE1601_IRQ_KEYPAD_OVER 2
118 #define STMPE1601_IRQ_KEYPAD 1
119 #define STMPE1601_IRQ_WAKEUP 0
120 #define STMPE1601_NR_INTERNAL_IRQS 9
122 #define STMPE1601_REG_SYS_CTRL 0x02
123 #define STMPE1601_REG_SYS_CTRL2 0x03
124 #define STMPE1601_REG_ICR_LSB 0x11
125 #define STMPE1601_REG_IER_LSB 0x13
126 #define STMPE1601_REG_ISR_MSB 0x14
127 #define STMPE1601_REG_CHIP_ID 0x80
128 #define STMPE1601_REG_INT_EN_GPIO_MASK_LSB 0x17
129 #define STMPE1601_REG_INT_STA_GPIO_MSB 0x18
130 #define STMPE1601_REG_GPIO_MP_LSB 0x87
131 #define STMPE1601_REG_GPIO_SET_LSB 0x83
132 #define STMPE1601_REG_GPIO_CLR_LSB 0x85
133 #define STMPE1601_REG_GPIO_SET_DIR_LSB 0x89
134 #define STMPE1601_REG_GPIO_ED_MSB 0x8A
135 #define STMPE1601_REG_GPIO_RE_LSB 0x8D
136 #define STMPE1601_REG_GPIO_FE_LSB 0x8F
137 #define STMPE1601_REG_GPIO_AF_U_MSB 0x92
139 #define STMPE1601_SYS_CTRL_ENABLE_GPIO (1 << 3)
140 #define STMPE1601_SYS_CTRL_ENABLE_KPC (1 << 1)
141 #define STMPE1601_SYSCON_ENABLE_SPWM (1 << 0)
143 /* The 1601/2403 share the same masks */
144 #define STMPE1601_AUTOSLEEP_TIMEOUT_MASK (0x7)
145 #define STPME1601_AUTOSLEEP_ENABLE (1 << 3)
148 * STMPE24xx
151 #define STMPE24XX_IRQ_GPIOC 8
152 #define STMPE24XX_IRQ_PWM2 7
153 #define STMPE24XX_IRQ_PWM1 6
154 #define STMPE24XX_IRQ_PWM0 5
155 #define STMPE24XX_IRQ_ROT_OVER 4
156 #define STMPE24XX_IRQ_ROT 3
157 #define STMPE24XX_IRQ_KEYPAD_OVER 2
158 #define STMPE24XX_IRQ_KEYPAD 1
159 #define STMPE24XX_IRQ_WAKEUP 0
160 #define STMPE24XX_NR_INTERNAL_IRQS 9
162 #define STMPE24XX_REG_SYS_CTRL 0x02
163 #define STMPE24XX_REG_ICR_LSB 0x11
164 #define STMPE24XX_REG_IER_LSB 0x13
165 #define STMPE24XX_REG_ISR_MSB 0x14
166 #define STMPE24XX_REG_CHIP_ID 0x80
167 #define STMPE24XX_REG_IEGPIOR_LSB 0x18
168 #define STMPE24XX_REG_ISGPIOR_MSB 0x19
169 #define STMPE24XX_REG_GPMR_LSB 0xA5
170 #define STMPE24XX_REG_GPSR_LSB 0x85
171 #define STMPE24XX_REG_GPCR_LSB 0x88
172 #define STMPE24XX_REG_GPDR_LSB 0x8B
173 #define STMPE24XX_REG_GPEDR_MSB 0x8C
174 #define STMPE24XX_REG_GPRER_LSB 0x91
175 #define STMPE24XX_REG_GPFER_LSB 0x94
176 #define STMPE24XX_REG_GPAFR_U_MSB 0x9B
178 #define STMPE24XX_SYS_CTRL_ENABLE_GPIO (1 << 3)
179 #define STMPE24XX_SYSCON_ENABLE_PWM (1 << 2)
180 #define STMPE24XX_SYS_CTRL_ENABLE_KPC (1 << 1)
181 #define STMPE24XX_SYSCON_ENABLE_ROT (1 << 0)
183 #endif