add f_flags to struct statfs(64)

[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / serial / serial_txx9.c

/*
 *  drivers/serial/serial_txx9.c
 *
 * Derived from many drivers using generic_serial interface,
 * especially serial_tx3912.c by Steven J. Hill and r39xx_serial.c
 * (was in Linux/VR tree) by Jim Pick.
 *
 *  Copyright (C) 1999 Harald Koerfgen
 *  Copyright (C) 2000 Jim Pick <jim@jimpick.com>
 *  Copyright (C) 2001 Steven J. Hill (sjhill@realitydiluted.com)
 *  Copyright (C) 2000-2002 Toshiba Corporation
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 *  Serial driver for TX3927/TX4927/TX4925/TX4938 internal SIO controller
 */

#if defined(CONFIG_SERIAL_TXX9_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif

#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/serial_core.h>
#include <linux/serial.h>

#include <asm/io.h>

static char *serial_version = "1.11";
static char *serial_name = "TX39/49 Serial driver";

#define PASS_LIMIT      256

#if !defined(CONFIG_SERIAL_TXX9_STDSERIAL)
/* "ttyS" is used for standard serial driver */
#define TXX9_TTY_NAME "ttyTX"
#define TXX9_TTY_MINOR_START    196
#define TXX9_TTY_MAJOR  204
#else
/* acts like standard serial driver */
#define TXX9_TTY_NAME "ttyS"
#define TXX9_TTY_MINOR_START    64
#define TXX9_TTY_MAJOR  TTY_MAJOR
#endif

/* flag aliases */
#define UPF_TXX9_HAVE_CTS_LINE  UPF_BUGGY_UART
#define UPF_TXX9_USE_SCLK       UPF_MAGIC_MULTIPLIER

#ifdef CONFIG_PCI
/* support for Toshiba TC86C001 SIO */
#define ENABLE_SERIAL_TXX9_PCI
#endif

/*
 * Number of serial ports
 */
#define UART_NR  CONFIG_SERIAL_TXX9_NR_UARTS

struct uart_txx9_port {
        struct uart_port        port;
        /* No additional info for now */
};

#define TXX9_REGION_SIZE        0x24

/* TXX9 Serial Registers */
#define TXX9_SILCR      0x00
#define TXX9_SIDICR     0x04
#define TXX9_SIDISR     0x08
#define TXX9_SICISR     0x0c
#define TXX9_SIFCR      0x10
#define TXX9_SIFLCR     0x14
#define TXX9_SIBGR      0x18
#define TXX9_SITFIFO    0x1c
#define TXX9_SIRFIFO    0x20

/* SILCR : Line Control */
#define TXX9_SILCR_SCS_MASK     0x00000060
#define TXX9_SILCR_SCS_IMCLK    0x00000000
#define TXX9_SILCR_SCS_IMCLK_BG 0x00000020
#define TXX9_SILCR_SCS_SCLK     0x00000040
#define TXX9_SILCR_SCS_SCLK_BG  0x00000060
#define TXX9_SILCR_UEPS 0x00000010
#define TXX9_SILCR_UPEN 0x00000008
#define TXX9_SILCR_USBL_MASK    0x00000004
#define TXX9_SILCR_USBL_1BIT    0x00000000
#define TXX9_SILCR_USBL_2BIT    0x00000004
#define TXX9_SILCR_UMODE_MASK   0x00000003
#define TXX9_SILCR_UMODE_8BIT   0x00000000
#define TXX9_SILCR_UMODE_7BIT   0x00000001

/* SIDICR : DMA/Int. Control */
#define TXX9_SIDICR_TDE 0x00008000
#define TXX9_SIDICR_RDE 0x00004000
#define TXX9_SIDICR_TIE 0x00002000
#define TXX9_SIDICR_RIE 0x00001000
#define TXX9_SIDICR_SPIE        0x00000800
#define TXX9_SIDICR_CTSAC       0x00000600
#define TXX9_SIDICR_STIE_MASK   0x0000003f
#define TXX9_SIDICR_STIE_OERS           0x00000020
#define TXX9_SIDICR_STIE_CTSS           0x00000010
#define TXX9_SIDICR_STIE_RBRKD  0x00000008
#define TXX9_SIDICR_STIE_TRDY           0x00000004
#define TXX9_SIDICR_STIE_TXALS  0x00000002
#define TXX9_SIDICR_STIE_UBRKD  0x00000001

/* SIDISR : DMA/Int. Status */
#define TXX9_SIDISR_UBRK        0x00008000
#define TXX9_SIDISR_UVALID      0x00004000
#define TXX9_SIDISR_UFER        0x00002000
#define TXX9_SIDISR_UPER        0x00001000
#define TXX9_SIDISR_UOER        0x00000800
#define TXX9_SIDISR_ERI 0x00000400
#define TXX9_SIDISR_TOUT        0x00000200
#define TXX9_SIDISR_TDIS        0x00000100
#define TXX9_SIDISR_RDIS        0x00000080
#define TXX9_SIDISR_STIS        0x00000040
#define TXX9_SIDISR_RFDN_MASK   0x0000001f

/* SICISR : Change Int. Status */
#define TXX9_SICISR_OERS        0x00000020
#define TXX9_SICISR_CTSS        0x00000010
#define TXX9_SICISR_RBRKD       0x00000008
#define TXX9_SICISR_TRDY        0x00000004
#define TXX9_SICISR_TXALS       0x00000002
#define TXX9_SICISR_UBRKD       0x00000001

/* SIFCR : FIFO Control */
#define TXX9_SIFCR_SWRST        0x00008000
#define TXX9_SIFCR_RDIL_MASK    0x00000180
#define TXX9_SIFCR_RDIL_1       0x00000000
#define TXX9_SIFCR_RDIL_4       0x00000080
#define TXX9_SIFCR_RDIL_8       0x00000100
#define TXX9_SIFCR_RDIL_12      0x00000180
#define TXX9_SIFCR_RDIL_MAX     0x00000180
#define TXX9_SIFCR_TDIL_MASK    0x00000018
#define TXX9_SIFCR_TDIL_MASK    0x00000018
#define TXX9_SIFCR_TDIL_1       0x00000000
#define TXX9_SIFCR_TDIL_4       0x00000001
#define TXX9_SIFCR_TDIL_8       0x00000010
#define TXX9_SIFCR_TDIL_MAX     0x00000010
#define TXX9_SIFCR_TFRST        0x00000004
#define TXX9_SIFCR_RFRST        0x00000002
#define TXX9_SIFCR_FRSTE        0x00000001
#define TXX9_SIO_TX_FIFO        8
#define TXX9_SIO_RX_FIFO        16

/* SIFLCR : Flow Control */
#define TXX9_SIFLCR_RCS 0x00001000
#define TXX9_SIFLCR_TES 0x00000800
#define TXX9_SIFLCR_RTSSC       0x00000200
#define TXX9_SIFLCR_RSDE        0x00000100
#define TXX9_SIFLCR_TSDE        0x00000080
#define TXX9_SIFLCR_RTSTL_MASK  0x0000001e
#define TXX9_SIFLCR_RTSTL_MAX   0x0000001e
#define TXX9_SIFLCR_TBRK        0x00000001

/* SIBGR : Baudrate Control */
#define TXX9_SIBGR_BCLK_MASK    0x00000300
#define TXX9_SIBGR_BCLK_T0      0x00000000
#define TXX9_SIBGR_BCLK_T2      0x00000100
#define TXX9_SIBGR_BCLK_T4      0x00000200
#define TXX9_SIBGR_BCLK_T6      0x00000300
#define TXX9_SIBGR_BRD_MASK     0x000000ff

static inline unsigned int sio_in(struct uart_txx9_port *up, int offset)
{
        switch (up->port.iotype) {
        default:
                return __raw_readl(up->port.membase + offset);
        case UPIO_PORT:
                return inl(up->port.iobase + offset);
        }
}

static inline void
sio_out(struct uart_txx9_port *up, int offset, int value)
{
        switch (up->port.iotype) {
        default:
                __raw_writel(value, up->port.membase + offset);
                break;
        case UPIO_PORT:
                outl(value, up->port.iobase + offset);
                break;
        }
}

static inline void
sio_mask(struct uart_txx9_port *up, int offset, unsigned int value)
{
        sio_out(up, offset, sio_in(up, offset) & ~value);
}
static inline void
sio_set(struct uart_txx9_port *up, int offset, unsigned int value)
{
        sio_out(up, offset, sio_in(up, offset) | value);
}

static inline void
sio_quot_set(struct uart_txx9_port *up, int quot)
{
        quot >>= 1;
        if (quot < 256)
                sio_out(up, TXX9_SIBGR, quot | TXX9_SIBGR_BCLK_T0);
        else if (quot < (256 << 2))
                sio_out(up, TXX9_SIBGR, (quot >> 2) | TXX9_SIBGR_BCLK_T2);
        else if (quot < (256 << 4))
                sio_out(up, TXX9_SIBGR, (quot >> 4) | TXX9_SIBGR_BCLK_T4);
        else if (quot < (256 << 6))
                sio_out(up, TXX9_SIBGR, (quot >> 6) | TXX9_SIBGR_BCLK_T6);
        else
                sio_out(up, TXX9_SIBGR, 0xff | TXX9_SIBGR_BCLK_T6);
}

static struct uart_txx9_port *to_uart_txx9_port(struct uart_port *port)
{
        return container_of(port, struct uart_txx9_port, port);
}

static void serial_txx9_stop_tx(struct uart_port *port)
{
        struct uart_txx9_port *up = to_uart_txx9_port(port);
        sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE);
}

static void serial_txx9_start_tx(struct uart_port *port)
{
        struct uart_txx9_port *up = to_uart_txx9_port(port);
        sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE);
}

static void serial_txx9_stop_rx(struct uart_port *port)
{
        struct uart_txx9_port *up = to_uart_txx9_port(port);
        up->port.read_status_mask &= ~TXX9_SIDISR_RDIS;
}

static void serial_txx9_enable_ms(struct uart_port *port)
{
        /* TXX9-SIO can not control DTR... */
}

static void serial_txx9_initialize(struct uart_port *port)
{
        struct uart_txx9_port *up = to_uart_txx9_port(port);
        unsigned int tmout = 10000;

        sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST);
        /* TX4925 BUG WORKAROUND.  Accessing SIOC register
         * immediately after soft reset causes bus error. */
        mmiowb();
        udelay(1);
        while ((sio_in(up, TXX9_SIFCR) & TXX9_SIFCR_SWRST) && --tmout)
                udelay(1);
        /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */
        sio_set(up, TXX9_SIFCR,
                TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1);
        /* initial settings */
        sio_out(up, TXX9_SILCR,
                TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT |
                ((up->port.flags & UPF_TXX9_USE_SCLK) ?
                 TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG));
        sio_quot_set(up, uart_get_divisor(port, 9600));
        sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */);
        sio_out(up, TXX9_SIDICR, 0);
}

static inline void
receive_chars(struct uart_txx9_port *up, unsigned int *status)
{
        struct tty_struct *tty = up->port.state->port.tty;
        unsigned char ch;
        unsigned int disr = *status;
        int max_count = 256;
        char flag;
        unsigned int next_ignore_status_mask;

        do {
                ch = sio_in(up, TXX9_SIRFIFO);
                flag = TTY_NORMAL;
                up->port.icount.rx++;

                /* mask out RFDN_MASK bit added by previous overrun */
                next_ignore_status_mask =
                        up->port.ignore_status_mask & ~TXX9_SIDISR_RFDN_MASK;
                if (unlikely(disr & (TXX9_SIDISR_UBRK | TXX9_SIDISR_UPER |
                                     TXX9_SIDISR_UFER | TXX9_SIDISR_UOER))) {
                        /*
                         * For statistics only
                         */
                        if (disr & TXX9_SIDISR_UBRK) {
                                disr &= ~(TXX9_SIDISR_UFER | TXX9_SIDISR_UPER);
                                up->port.icount.brk++;
                                /*
                                 * We do the SysRQ and SAK checking
                                 * here because otherwise the break
                                 * may get masked by ignore_status_mask
                                 * or read_status_mask.
                                 */
                                if (uart_handle_break(&up->port))
                                        goto ignore_char;
                        } else if (disr & TXX9_SIDISR_UPER)
                                up->port.icount.parity++;
                        else if (disr & TXX9_SIDISR_UFER)
                                up->port.icount.frame++;
                        if (disr & TXX9_SIDISR_UOER) {
                                up->port.icount.overrun++;
                                /*
                                 * The receiver read buffer still hold
                                 * a char which caused overrun.
                                 * Ignore next char by adding RFDN_MASK
                                 * to ignore_status_mask temporarily.
                                 */
                                next_ignore_status_mask |=
                                        TXX9_SIDISR_RFDN_MASK;
                        }

                        /*
                         * Mask off conditions which should be ingored.
                         */
                        disr &= up->port.read_status_mask;

                        if (disr & TXX9_SIDISR_UBRK) {
                                flag = TTY_BREAK;
                        } else if (disr & TXX9_SIDISR_UPER)
                                flag = TTY_PARITY;
                        else if (disr & TXX9_SIDISR_UFER)
                                flag = TTY_FRAME;
                }
                if (uart_handle_sysrq_char(&up->port, ch))
                        goto ignore_char;

                uart_insert_char(&up->port, disr, TXX9_SIDISR_UOER, ch, flag);

        ignore_char:
                up->port.ignore_status_mask = next_ignore_status_mask;
                disr = sio_in(up, TXX9_SIDISR);
        } while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0));
        spin_unlock(&up->port.lock);
        tty_flip_buffer_push(tty);
        spin_lock(&up->port.lock);
        *status = disr;
}

static inline void transmit_chars(struct uart_txx9_port *up)
{
        struct circ_buf *xmit = &up->port.state->xmit;
        int count;

        if (up->port.x_char) {
                sio_out(up, TXX9_SITFIFO, up->port.x_char);
                up->port.icount.tx++;
                up->port.x_char = 0;
                return;
        }
        if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
                serial_txx9_stop_tx(&up->port);
                return;
        }

        count = TXX9_SIO_TX_FIFO;
        do {
                sio_out(up, TXX9_SITFIFO, xmit->buf[xmit->tail]);
                xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
                up->port.icount.tx++;
                if (uart_circ_empty(xmit))
                        break;
        } while (--count > 0);

        if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
                uart_write_wakeup(&up->port);

        if (uart_circ_empty(xmit))
                serial_txx9_stop_tx(&up->port);
}

static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id)
{
        int pass_counter = 0;
        struct uart_txx9_port *up = dev_id;
        unsigned int status;

        while (1) {
                spin_lock(&up->port.lock);
                status = sio_in(up, TXX9_SIDISR);
                if (!(sio_in(up, TXX9_SIDICR) & TXX9_SIDICR_TIE))
                        status &= ~TXX9_SIDISR_TDIS;
                if (!(status & (TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS |
                                TXX9_SIDISR_TOUT))) {
                        spin_unlock(&up->port.lock);
                        break;
                }

                if (status & TXX9_SIDISR_RDIS)
                        receive_chars(up, &status);
                if (status & TXX9_SIDISR_TDIS)
                        transmit_chars(up);
                /* Clear TX/RX Int. Status */
                sio_mask(up, TXX9_SIDISR,
                         TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS |
                         TXX9_SIDISR_TOUT);
                spin_unlock(&up->port.lock);

                if (pass_counter++ > PASS_LIMIT)
                        break;
        }

        return pass_counter ? IRQ_HANDLED : IRQ_NONE;
}

static unsigned int serial_txx9_tx_empty(struct uart_port *port)
{
        struct uart_txx9_port *up = to_uart_txx9_port(port);
        unsigned long flags;
        unsigned int ret;

        spin_lock_irqsave(&up->port.lock, flags);
        ret = (sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS) ? TIOCSER_TEMT : 0;
        spin_unlock_irqrestore(&up->port.lock, flags);

        return ret;
}

static unsigned int serial_txx9_get_mctrl(struct uart_port *port)
{
        struct uart_txx9_port *up = to_uart_txx9_port(port);
        unsigned int ret;

        /* no modem control lines */
        ret = TIOCM_CAR | TIOCM_DSR;
        ret |= (sio_in(up, TXX9_SIFLCR) & TXX9_SIFLCR_RTSSC) ? 0 : TIOCM_RTS;
        ret |= (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS) ? 0 : TIOCM_CTS;

        return ret;
}

static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
        struct uart_txx9_port *up = to_uart_txx9_port(port);

        if (mctrl & TIOCM_RTS)
                sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC);
        else
                sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC);
}

static void serial_txx9_break_ctl(struct uart_port *port, int break_state)
{
        struct uart_txx9_port *up = to_uart_txx9_port(port);
        unsigned long flags;

        spin_lock_irqsave(&up->port.lock, flags);
        if (break_state == -1)
                sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK);
        else
                sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK);
        spin_unlock_irqrestore(&up->port.lock, flags);
}

#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || (CONFIG_CONSOLE_POLL)
/*
 *      Wait for transmitter & holding register to empty
 */
static void wait_for_xmitr(struct uart_txx9_port *up)
{
        unsigned int tmout = 10000;

        /* Wait up to 10ms for the character(s) to be sent. */
        while (--tmout &&
               !(sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS))
                udelay(1);

        /* Wait up to 1s for flow control if necessary */
        if (up->port.flags & UPF_CONS_FLOW) {
                tmout = 1000000;
                while (--tmout &&
                       (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS))
                        udelay(1);
        }
}
#endif

#ifdef CONFIG_CONSOLE_POLL
/*
 * Console polling routines for writing and reading from the uart while
 * in an interrupt or debug context.
 */

static int serial_txx9_get_poll_char(struct uart_port *port)
{
        unsigned int ier;
        unsigned char c;
        struct uart_txx9_port *up = to_uart_txx9_port(port);

        /*
         *      First save the IER then disable the interrupts
         */
        ier = sio_in(up, TXX9_SIDICR);
        sio_out(up, TXX9_SIDICR, 0);

        while (sio_in(up, TXX9_SIDISR) & TXX9_SIDISR_UVALID)
                ;

        c = sio_in(up, TXX9_SIRFIFO);

        /*
         *      Finally, clear RX interrupt status
         *      and restore the IER
         */
        sio_mask(up, TXX9_SIDISR, TXX9_SIDISR_RDIS);
        sio_out(up, TXX9_SIDICR, ier);
        return c;
}


static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c)
{
        unsigned int ier;
        struct uart_txx9_port *up = to_uart_txx9_port(port);

        /*
         *      First save the IER then disable the interrupts
         */
        ier = sio_in(up, TXX9_SIDICR);
        sio_out(up, TXX9_SIDICR, 0);

        wait_for_xmitr(up);
        /*
         *      Send the character out.
         *      If a LF, also do CR...
         */
        sio_out(up, TXX9_SITFIFO, c);
        if (c == 10) {
                wait_for_xmitr(up);
                sio_out(up, TXX9_SITFIFO, 13);
        }

        /*
         *      Finally, wait for transmitter to become empty
         *      and restore the IER
         */
        wait_for_xmitr(up);
        sio_out(up, TXX9_SIDICR, ier);
}

#endif /* CONFIG_CONSOLE_POLL */

static int serial_txx9_startup(struct uart_port *port)
{
        struct uart_txx9_port *up = to_uart_txx9_port(port);
        unsigned long flags;
        int retval;

        /*
         * Clear the FIFO buffers and disable them.
         * (they will be reenabled in set_termios())
         */
        sio_set(up, TXX9_SIFCR,
                TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE);
        /* clear reset */
        sio_mask(up, TXX9_SIFCR,
                 TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE);
        sio_out(up, TXX9_SIDICR, 0);

        /*
         * Clear the interrupt registers.
         */
        sio_out(up, TXX9_SIDISR, 0);

        retval = request_irq(up->port.irq, serial_txx9_interrupt,
                             IRQF_SHARED, "serial_txx9", up);
        if (retval)
                return retval;

        /*
         * Now, initialize the UART
         */
        spin_lock_irqsave(&up->port.lock, flags);
        serial_txx9_set_mctrl(&up->port, up->port.mctrl);
        spin_unlock_irqrestore(&up->port.lock, flags);

        /* Enable RX/TX */
        sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE);

        /*
         * Finally, enable interrupts.
         */
        sio_set(up, TXX9_SIDICR, TXX9_SIDICR_RIE);

        return 0;
}

static void serial_txx9_shutdown(struct uart_port *port)
{
        struct uart_txx9_port *up = to_uart_txx9_port(port);
        unsigned long flags;

        /*
         * Disable interrupts from this port
         */
        sio_out(up, TXX9_SIDICR, 0);    /* disable all intrs */

        spin_lock_irqsave(&up->port.lock, flags);
        serial_txx9_set_mctrl(&up->port, up->port.mctrl);
        spin_unlock_irqrestore(&up->port.lock, flags);

        /*
         * Disable break condition
         */
        sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK);

#ifdef CONFIG_SERIAL_TXX9_CONSOLE
        if (up->port.cons && up->port.line == up->port.cons->index) {
                free_irq(up->port.irq, up);
                return;
        }
#endif
        /* reset FIFOs */
        sio_set(up, TXX9_SIFCR,
                TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE);
        /* clear reset */
        sio_mask(up, TXX9_SIFCR,
                 TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE);

        /* Disable RX/TX */
        sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE);

        free_irq(up->port.irq, up);
}

static void
serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios,
                       struct ktermios *old)
{
        struct uart_txx9_port *up = to_uart_txx9_port(port);
        unsigned int cval, fcr = 0;
        unsigned long flags;
        unsigned int baud, quot;

        /*
         * We don't support modem control lines.
         */
        termios->c_cflag &= ~(HUPCL | CMSPAR);
        termios->c_cflag |= CLOCAL;

        cval = sio_in(up, TXX9_SILCR);
        /* byte size and parity */
        cval &= ~TXX9_SILCR_UMODE_MASK;
        switch (termios->c_cflag & CSIZE) {
        case CS7:
                cval |= TXX9_SILCR_UMODE_7BIT;
                break;
        default:
        case CS5:       /* not supported */
        case CS6:       /* not supported */
        case CS8:
                cval |= TXX9_SILCR_UMODE_8BIT;
                break;
        }

        cval &= ~TXX9_SILCR_USBL_MASK;
        if (termios->c_cflag & CSTOPB)
                cval |= TXX9_SILCR_USBL_2BIT;
        else
                cval |= TXX9_SILCR_USBL_1BIT;
        cval &= ~(TXX9_SILCR_UPEN | TXX9_SILCR_UEPS);
        if (termios->c_cflag & PARENB)
                cval |= TXX9_SILCR_UPEN;
        if (!(termios->c_cflag & PARODD))
                cval |= TXX9_SILCR_UEPS;

        /*
         * Ask the core to calculate the divisor for us.
         */
        baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16/2);
        quot = uart_get_divisor(port, baud);

        /* Set up FIFOs */
        /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */
        fcr = TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1;

        /*
         * Ok, we're now changing the port state.  Do it with
         * interrupts disabled.
         */
        spin_lock_irqsave(&up->port.lock, flags);

        /*
         * Update the per-port timeout.
         */
        uart_update_timeout(port, termios->c_cflag, baud);

        up->port.read_status_mask = TXX9_SIDISR_UOER |
                TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS;
        if (termios->c_iflag & INPCK)
                up->port.read_status_mask |= TXX9_SIDISR_UFER | TXX9_SIDISR_UPER;
        if (termios->c_iflag & (BRKINT | PARMRK))
                up->port.read_status_mask |= TXX9_SIDISR_UBRK;

        /*
         * Characteres to ignore
         */
        up->port.ignore_status_mask = 0;
        if (termios->c_iflag & IGNPAR)
                up->port.ignore_status_mask |= TXX9_SIDISR_UPER | TXX9_SIDISR_UFER;
        if (termios->c_iflag & IGNBRK) {
                up->port.ignore_status_mask |= TXX9_SIDISR_UBRK;
                /*
                 * If we're ignoring parity and break indicators,
                 * ignore overruns too (for real raw support).
                 */
                if (termios->c_iflag & IGNPAR)
                        up->port.ignore_status_mask |= TXX9_SIDISR_UOER;
        }

        /*
         * ignore all characters if CREAD is not set
         */
        if ((termios->c_cflag & CREAD) == 0)
                up->port.ignore_status_mask |= TXX9_SIDISR_RDIS;

        /* CTS flow control flag */
        if ((termios->c_cflag & CRTSCTS) &&
            (up->port.flags & UPF_TXX9_HAVE_CTS_LINE)) {
                sio_set(up, TXX9_SIFLCR,
                        TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES);
        } else {
                sio_mask(up, TXX9_SIFLCR,
                         TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES);
        }

        sio_out(up, TXX9_SILCR, cval);
        sio_quot_set(up, quot);
        sio_out(up, TXX9_SIFCR, fcr);

        serial_txx9_set_mctrl(&up->port, up->port.mctrl);
        spin_unlock_irqrestore(&up->port.lock, flags);
}

static void
serial_txx9_pm(struct uart_port *port, unsigned int state,
              unsigned int oldstate)
{
        /*
         * If oldstate was -1 this is called from
         * uart_configure_port().  In this case do not initialize the
         * port now, because the port was already initialized (for
         * non-console port) or should not be initialized here (for
         * console port).  If we initialized the port here we lose
         * serial console settings.
         */
        if (state == 0 && oldstate != -1)
                serial_txx9_initialize(port);
}

static int serial_txx9_request_resource(struct uart_txx9_port *up)
{
        unsigned int size = TXX9_REGION_SIZE;
        int ret = 0;

        switch (up->port.iotype) {
        default:
                if (!up->port.mapbase)
                        break;

                if (!request_mem_region(up->port.mapbase, size, "serial_txx9")) {
                        ret = -EBUSY;
                        break;
                }

                if (up->port.flags & UPF_IOREMAP) {
                        up->port.membase = ioremap(up->port.mapbase, size);
                        if (!up->port.membase) {
                                release_mem_region(up->port.mapbase, size);
                                ret = -ENOMEM;
                        }
                }
                break;

        case UPIO_PORT:
                if (!request_region(up->port.iobase, size, "serial_txx9"))
                        ret = -EBUSY;
                break;
        }
        return ret;
}

static void serial_txx9_release_resource(struct uart_txx9_port *up)
{
        unsigned int size = TXX9_REGION_SIZE;

        switch (up->port.iotype) {
        default:
                if (!up->port.mapbase)
                        break;

                if (up->port.flags & UPF_IOREMAP) {
                        iounmap(up->port.membase);
                        up->port.membase = NULL;
                }

                release_mem_region(up->port.mapbase, size);
                break;

        case UPIO_PORT:
                release_region(up->port.iobase, size);
                break;
        }
}

static void serial_txx9_release_port(struct uart_port *port)
{
        struct uart_txx9_port *up = to_uart_txx9_port(port);
        serial_txx9_release_resource(up);
}

static int serial_txx9_request_port(struct uart_port *port)
{
        struct uart_txx9_port *up = to_uart_txx9_port(port);
        return serial_txx9_request_resource(up);
}

static void serial_txx9_config_port(struct uart_port *port, int uflags)
{
        struct uart_txx9_port *up = to_uart_txx9_port(port);
        int ret;

        /*
         * Find the region that we can probe for.  This in turn
         * tells us whether we can probe for the type of port.
         */
        ret = serial_txx9_request_resource(up);
        if (ret < 0)
                return;
        port->type = PORT_TXX9;
        up->port.fifosize = TXX9_SIO_TX_FIFO;

#ifdef CONFIG_SERIAL_TXX9_CONSOLE
        if (up->port.line == up->port.cons->index)
                return;
#endif
        serial_txx9_initialize(port);
}

static const char *
serial_txx9_type(struct uart_port *port)
{
        return "txx9";
}

static struct uart_ops serial_txx9_pops = {
        .tx_empty       = serial_txx9_tx_empty,
        .set_mctrl      = serial_txx9_set_mctrl,
        .get_mctrl      = serial_txx9_get_mctrl,
        .stop_tx        = serial_txx9_stop_tx,
        .start_tx       = serial_txx9_start_tx,
        .stop_rx        = serial_txx9_stop_rx,
        .enable_ms      = serial_txx9_enable_ms,
        .break_ctl      = serial_txx9_break_ctl,
        .startup        = serial_txx9_startup,
        .shutdown       = serial_txx9_shutdown,
        .set_termios    = serial_txx9_set_termios,
        .pm             = serial_txx9_pm,
        .type           = serial_txx9_type,
        .release_port   = serial_txx9_release_port,
        .request_port   = serial_txx9_request_port,
        .config_port    = serial_txx9_config_port,
#ifdef CONFIG_CONSOLE_POLL
        .poll_get_char  = serial_txx9_get_poll_char,
        .poll_put_char  = serial_txx9_put_poll_char,
#endif
};

static struct uart_txx9_port serial_txx9_ports[UART_NR];

static void __init serial_txx9_register_ports(struct uart_driver *drv,
                                              struct device *dev)
{
        int i;

        for (i = 0; i < UART_NR; i++) {
                struct uart_txx9_port *up = &serial_txx9_ports[i];

                up->port.line = i;
                up->port.ops = &serial_txx9_pops;
                up->port.dev = dev;
                if (up->port.iobase || up->port.mapbase)
                        uart_add_one_port(drv, &up->port);
        }
}

#ifdef CONFIG_SERIAL_TXX9_CONSOLE

static void serial_txx9_console_putchar(struct uart_port *port, int ch)
{
        struct uart_txx9_port *up = to_uart_txx9_port(port);

        wait_for_xmitr(up);
        sio_out(up, TXX9_SITFIFO, ch);
}

/*
 *      Print a string to the serial port trying not to disturb
 *      any possible real use of the port...
 *
 *      The console_lock must be held when we get here.
 */
static void
serial_txx9_console_write(struct console *co, const char *s, unsigned int count)
{
        struct uart_txx9_port *up = &serial_txx9_ports[co->index];
        unsigned int ier, flcr;

        /*
         *      First save the UER then disable the interrupts
         */
        ier = sio_in(up, TXX9_SIDICR);
        sio_out(up, TXX9_SIDICR, 0);
        /*
         *      Disable flow-control if enabled (and unnecessary)
         */
        flcr = sio_in(up, TXX9_SIFLCR);
        if (!(up->port.flags & UPF_CONS_FLOW) && (flcr & TXX9_SIFLCR_TES))
                sio_out(up, TXX9_SIFLCR, flcr & ~TXX9_SIFLCR_TES);

        uart_console_write(&up->port, s, count, serial_txx9_console_putchar);

        /*
         *      Finally, wait for transmitter to become empty
         *      and restore the IER
         */
        wait_for_xmitr(up);
        sio_out(up, TXX9_SIFLCR, flcr);
        sio_out(up, TXX9_SIDICR, ier);
}

static int __init serial_txx9_console_setup(struct console *co, char *options)
{
        struct uart_port *port;
        struct uart_txx9_port *up;
        int baud = 9600;
        int bits = 8;
        int parity = 'n';
        int flow = 'n';

        /*
         * Check whether an invalid uart number has been specified, and
         * if so, search for the first available port that does have
         * console support.
         */
        if (co->index >= UART_NR)
                co->index = 0;
        up = &serial_txx9_ports[co->index];
        port = &up->port;
        if (!port->ops)
                return -ENODEV;

        serial_txx9_initialize(&up->port);

        if (options)
                uart_parse_options(options, &baud, &parity, &bits, &flow);

        return uart_set_options(port, co, baud, parity, bits, flow);
}

static struct uart_driver serial_txx9_reg;
static struct console serial_txx9_console = {
        .name           = TXX9_TTY_NAME,
        .write          = serial_txx9_console_write,
        .device         = uart_console_device,
        .setup          = serial_txx9_console_setup,
        .flags          = CON_PRINTBUFFER,
        .index          = -1,
        .data           = &serial_txx9_reg,
};

static int __init serial_txx9_console_init(void)
{
        register_console(&serial_txx9_console);
        return 0;
}
console_initcall(serial_txx9_console_init);

#define SERIAL_TXX9_CONSOLE     &serial_txx9_console
#else
#define SERIAL_TXX9_CONSOLE     NULL
#endif

static struct uart_driver serial_txx9_reg = {
        .owner                  = THIS_MODULE,
        .driver_name            = "serial_txx9",
        .dev_name               = TXX9_TTY_NAME,
        .major                  = TXX9_TTY_MAJOR,
        .minor                  = TXX9_TTY_MINOR_START,
        .nr                     = UART_NR,
        .cons                   = SERIAL_TXX9_CONSOLE,
};

int __init early_serial_txx9_setup(struct uart_port *port)
{
        if (port->line >= ARRAY_SIZE(serial_txx9_ports))
                return -ENODEV;

        serial_txx9_ports[port->line].port = *port;
        serial_txx9_ports[port->line].port.ops = &serial_txx9_pops;
        serial_txx9_ports[port->line].port.flags |=
                UPF_BOOT_AUTOCONF | UPF_FIXED_PORT;
        return 0;
}

static DEFINE_MUTEX(serial_txx9_mutex);

/**
 *      serial_txx9_register_port - register a serial port
 *      @port: serial port template
 *
 *      Configure the serial port specified by the request.
 *
 *      The port is then probed and if necessary the IRQ is autodetected
 *      If this fails an error is returned.
 *
 *      On success the port is ready to use and the line number is returned.
 */
static int __devinit serial_txx9_register_port(struct uart_port *port)
{
        int i;
        struct uart_txx9_port *uart;
        int ret = -ENOSPC;

        mutex_lock(&serial_txx9_mutex);
        for (i = 0; i < UART_NR; i++) {
                uart = &serial_txx9_ports[i];
                if (uart_match_port(&uart->port, port)) {
                        uart_remove_one_port(&serial_txx9_reg, &uart->port);
                        break;
                }
        }
        if (i == UART_NR) {
                /* Find unused port */
                for (i = 0; i < UART_NR; i++) {
                        uart = &serial_txx9_ports[i];
                        if (!(uart->port.iobase || uart->port.mapbase))
                                break;
                }
        }
        if (i < UART_NR) {
                uart->port.iobase = port->iobase;
                uart->port.membase = port->membase;
                uart->port.irq      = port->irq;
                uart->port.uartclk  = port->uartclk;
                uart->port.iotype   = port->iotype;
                uart->port.flags    = port->flags
                        | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT;
                uart->port.mapbase  = port->mapbase;
                if (port->dev)
                        uart->port.dev = port->dev;
                ret = uart_add_one_port(&serial_txx9_reg, &uart->port);
                if (ret == 0)
                        ret = uart->port.line;
        }
        mutex_unlock(&serial_txx9_mutex);
        return ret;
}

/**
 *      serial_txx9_unregister_port - remove a txx9 serial port at runtime
 *      @line: serial line number
 *
 *      Remove one serial port.  This may not be called from interrupt
 *      context.  We hand the port back to the our control.
 */
static void __devexit serial_txx9_unregister_port(int line)
{
        struct uart_txx9_port *uart = &serial_txx9_ports[line];

        mutex_lock(&serial_txx9_mutex);
        uart_remove_one_port(&serial_txx9_reg, &uart->port);
        uart->port.flags = 0;
        uart->port.type = PORT_UNKNOWN;
        uart->port.iobase = 0;
        uart->port.mapbase = 0;
        uart->port.membase = NULL;
        uart->port.dev = NULL;
        mutex_unlock(&serial_txx9_mutex);
}

/*
 * Register a set of serial devices attached to a platform device.
 */
static int __devinit serial_txx9_probe(struct platform_device *dev)
{
        struct uart_port *p = dev->dev.platform_data;
        struct uart_port port;
        int ret, i;

        memset(&port, 0, sizeof(struct uart_port));
        for (i = 0; p && p->uartclk != 0; p++, i++) {
                port.iobase     = p->iobase;
                port.membase    = p->membase;
                port.irq        = p->irq;
                port.uartclk    = p->uartclk;
                port.iotype     = p->iotype;
                port.flags      = p->flags;
                port.mapbase    = p->mapbase;
                port.dev        = &dev->dev;
                ret = serial_txx9_register_port(&port);
                if (ret < 0) {
                        dev_err(&dev->dev, "unable to register port at index %d "
                                "(IO%lx MEM%llx IRQ%d): %d\n", i,
                                p->iobase, (unsigned long long)p->mapbase,
                                p->irq, ret);
                }
        }
        return 0;
}

/*
 * Remove serial ports registered against a platform device.
 */
static int __devexit serial_txx9_remove(struct platform_device *dev)
{
        int i;

        for (i = 0; i < UART_NR; i++) {
                struct uart_txx9_port *up = &serial_txx9_ports[i];

                if (up->port.dev == &dev->dev)
                        serial_txx9_unregister_port(i);
        }
        return 0;
}

#ifdef CONFIG_PM
static int serial_txx9_suspend(struct platform_device *dev, pm_message_t state)
{
        int i;

        for (i = 0; i < UART_NR; i++) {
                struct uart_txx9_port *up = &serial_txx9_ports[i];

                if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
                        uart_suspend_port(&serial_txx9_reg, &up->port);
        }

        return 0;
}

static int serial_txx9_resume(struct platform_device *dev)
{
        int i;

        for (i = 0; i < UART_NR; i++) {
                struct uart_txx9_port *up = &serial_txx9_ports[i];

                if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
                        uart_resume_port(&serial_txx9_reg, &up->port);
        }

        return 0;
}
#endif

static struct platform_driver serial_txx9_plat_driver = {
        .probe          = serial_txx9_probe,
        .remove         = __devexit_p(serial_txx9_remove),
#ifdef CONFIG_PM
        .suspend        = serial_txx9_suspend,
        .resume         = serial_txx9_resume,
#endif
        .driver         = {
                .name   = "serial_txx9",
                .owner  = THIS_MODULE,
        },
};

#ifdef ENABLE_SERIAL_TXX9_PCI
/*
 * Probe one serial board.  Unfortunately, there is no rhyme nor reason
 * to the arrangement of serial ports on a PCI card.
 */
static int __devinit
pciserial_txx9_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
{
        struct uart_port port;
        int line;
        int rc;

        rc = pci_enable_device(dev);
        if (rc)
                return rc;

        memset(&port, 0, sizeof(port));
        port.ops = &serial_txx9_pops;
        port.flags |= UPF_TXX9_HAVE_CTS_LINE;
        port.uartclk = 66670000;
        port.irq = dev->irq;
        port.iotype = UPIO_PORT;
        port.iobase = pci_resource_start(dev, 1);
        port.dev = &dev->dev;
        line = serial_txx9_register_port(&port);
        if (line < 0) {
                printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), line);
                pci_disable_device(dev);
                return line;
        }
        pci_set_drvdata(dev, &serial_txx9_ports[line]);

        return 0;
}

static void __devexit pciserial_txx9_remove_one(struct pci_dev *dev)
{
        struct uart_txx9_port *up = pci_get_drvdata(dev);

        pci_set_drvdata(dev, NULL);

        if (up) {
                serial_txx9_unregister_port(up->port.line);
                pci_disable_device(dev);
        }
}

#ifdef CONFIG_PM
static int pciserial_txx9_suspend_one(struct pci_dev *dev, pm_message_t state)
{
        struct uart_txx9_port *up = pci_get_drvdata(dev);

        if (up)
                uart_suspend_port(&serial_txx9_reg, &up->port);
        pci_save_state(dev);
        pci_set_power_state(dev, pci_choose_state(dev, state));
        return 0;
}

static int pciserial_txx9_resume_one(struct pci_dev *dev)
{
        struct uart_txx9_port *up = pci_get_drvdata(dev);

        pci_set_power_state(dev, PCI_D0);
        pci_restore_state(dev);
        if (up)
                uart_resume_port(&serial_txx9_reg, &up->port);
        return 0;
}
#endif

static const struct pci_device_id serial_txx9_pci_tbl[] = {
        { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC) },
        { 0, }
};

static struct pci_driver serial_txx9_pci_driver = {
        .name           = "serial_txx9",
        .probe          = pciserial_txx9_init_one,
        .remove         = __devexit_p(pciserial_txx9_remove_one),
#ifdef CONFIG_PM
        .suspend        = pciserial_txx9_suspend_one,
        .resume         = pciserial_txx9_resume_one,
#endif
        .id_table       = serial_txx9_pci_tbl,
};

MODULE_DEVICE_TABLE(pci, serial_txx9_pci_tbl);
#endif /* ENABLE_SERIAL_TXX9_PCI */

static struct platform_device *serial_txx9_plat_devs;

static int __init serial_txx9_init(void)
{
        int ret;

        printk(KERN_INFO "%s version %s\n", serial_name, serial_version);

        ret = uart_register_driver(&serial_txx9_reg);
        if (ret)
                goto out;

        serial_txx9_plat_devs = platform_device_alloc("serial_txx9", -1);
        if (!serial_txx9_plat_devs) {
                ret = -ENOMEM;
                goto unreg_uart_drv;
        }

        ret = platform_device_add(serial_txx9_plat_devs);
        if (ret)
                goto put_dev;

        serial_txx9_register_ports(&serial_txx9_reg,
                                   &serial_txx9_plat_devs->dev);

        ret = platform_driver_register(&serial_txx9_plat_driver);
        if (ret)
                goto del_dev;

#ifdef ENABLE_SERIAL_TXX9_PCI
        ret = pci_register_driver(&serial_txx9_pci_driver);
#endif
        if (ret == 0)
                goto out;

 del_dev:
        platform_device_del(serial_txx9_plat_devs);
 put_dev:
        platform_device_put(serial_txx9_plat_devs);
 unreg_uart_drv:
        uart_unregister_driver(&serial_txx9_reg);
 out:
        return ret;
}

static void __exit serial_txx9_exit(void)
{
        int i;

#ifdef ENABLE_SERIAL_TXX9_PCI
        pci_unregister_driver(&serial_txx9_pci_driver);
#endif
        platform_driver_unregister(&serial_txx9_plat_driver);
        platform_device_unregister(serial_txx9_plat_devs);
        for (i = 0; i < UART_NR; i++) {
                struct uart_txx9_port *up = &serial_txx9_ports[i];
                if (up->port.iobase || up->port.mapbase)
                        uart_remove_one_port(&serial_txx9_reg, &up->port);
        }

        uart_unregister_driver(&serial_txx9_reg);
}

module_init(serial_txx9_init);
module_exit(serial_txx9_exit);

MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("TX39/49 serial driver");

MODULE_ALIAS_CHARDEV_MAJOR(TXX9_TTY_MAJOR);