add f_flags to struct statfs(64)
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / hwmon / ds1621.c
blobe11363467a8d45cbd32207dde7f157254be76a10
1 /*
2 ds1621.c - Part of lm_sensors, Linux kernel modules for hardware
3 monitoring
4 Christian W. Zuckschwerdt <zany@triq.net> 2000-11-23
5 based on lm75.c by Frodo Looijaard <frodol@dds.nl>
6 Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with
7 the help of Jean Delvare <khali@linux-fr.org>
9 This program is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 2 of the License, or
12 (at your option) any later version.
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
19 You should have received a copy of the GNU General Public License
20 along with this program; if not, write to the Free Software
21 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 #include <linux/module.h>
25 #include <linux/init.h>
26 #include <linux/slab.h>
27 #include <linux/jiffies.h>
28 #include <linux/i2c.h>
29 #include <linux/hwmon.h>
30 #include <linux/hwmon-sysfs.h>
31 #include <linux/err.h>
32 #include <linux/mutex.h>
33 #include <linux/sysfs.h>
34 #include "lm75.h"
36 /* Addresses to scan */
37 static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
38 0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
40 /* Insmod parameters */
41 static int polarity = -1;
42 module_param(polarity, int, 0);
43 MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low");
45 /* Many DS1621 constants specified below */
46 /* Config register used for detection */
47 /* 7 6 5 4 3 2 1 0 */
48 /* |Done|THF |TLF |NVB | X | X |POL |1SHOT| */
49 #define DS1621_REG_CONFIG_NVB 0x10
50 #define DS1621_REG_CONFIG_POLARITY 0x02
51 #define DS1621_REG_CONFIG_1SHOT 0x01
52 #define DS1621_REG_CONFIG_DONE 0x80
54 /* The DS1621 registers */
55 static const u8 DS1621_REG_TEMP[3] = {
56 0xAA, /* input, word, RO */
57 0xA2, /* min, word, RW */
58 0xA1, /* max, word, RW */
60 #define DS1621_REG_CONF 0xAC /* byte, RW */
61 #define DS1621_COM_START 0xEE /* no data */
62 #define DS1621_COM_STOP 0x22 /* no data */
64 /* The DS1621 configuration register */
65 #define DS1621_ALARM_TEMP_HIGH 0x40
66 #define DS1621_ALARM_TEMP_LOW 0x20
68 /* Conversions */
69 #define ALARMS_FROM_REG(val) ((val) & \
70 (DS1621_ALARM_TEMP_HIGH | DS1621_ALARM_TEMP_LOW))
72 /* Each client has this additional data */
73 struct ds1621_data {
74 struct device *hwmon_dev;
75 struct mutex update_lock;
76 char valid; /* !=0 if following fields are valid */
77 unsigned long last_updated; /* In jiffies */
79 u16 temp[3]; /* Register values, word */
80 u8 conf; /* Register encoding, combined */
83 /* Temperature registers are word-sized.
84 DS1621 uses a high-byte first convention, which is exactly opposite to
85 the SMBus standard. */
86 static int ds1621_read_temp(struct i2c_client *client, u8 reg)
88 int ret;
90 ret = i2c_smbus_read_word_data(client, reg);
91 if (ret < 0)
92 return ret;
93 return swab16(ret);
96 static int ds1621_write_temp(struct i2c_client *client, u8 reg, u16 value)
98 return i2c_smbus_write_word_data(client, reg, swab16(value));
101 static void ds1621_init_client(struct i2c_client *client)
103 u8 conf, new_conf;
105 new_conf = conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
106 /* switch to continuous conversion mode */
107 new_conf &= ~DS1621_REG_CONFIG_1SHOT;
109 /* setup output polarity */
110 if (polarity == 0)
111 new_conf &= ~DS1621_REG_CONFIG_POLARITY;
112 else if (polarity == 1)
113 new_conf |= DS1621_REG_CONFIG_POLARITY;
115 if (conf != new_conf)
116 i2c_smbus_write_byte_data(client, DS1621_REG_CONF, new_conf);
118 /* start conversion */
119 i2c_smbus_write_byte(client, DS1621_COM_START);
122 static struct ds1621_data *ds1621_update_client(struct device *dev)
124 struct i2c_client *client = to_i2c_client(dev);
125 struct ds1621_data *data = i2c_get_clientdata(client);
126 u8 new_conf;
128 mutex_lock(&data->update_lock);
130 if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
131 || !data->valid) {
132 int i;
134 dev_dbg(&client->dev, "Starting ds1621 update\n");
136 data->conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
138 for (i = 0; i < ARRAY_SIZE(data->temp); i++)
139 data->temp[i] = ds1621_read_temp(client,
140 DS1621_REG_TEMP[i]);
142 /* reset alarms if necessary */
143 new_conf = data->conf;
144 if (data->temp[0] > data->temp[1]) /* input > min */
145 new_conf &= ~DS1621_ALARM_TEMP_LOW;
146 if (data->temp[0] < data->temp[2]) /* input < max */
147 new_conf &= ~DS1621_ALARM_TEMP_HIGH;
148 if (data->conf != new_conf)
149 i2c_smbus_write_byte_data(client, DS1621_REG_CONF,
150 new_conf);
152 data->last_updated = jiffies;
153 data->valid = 1;
156 mutex_unlock(&data->update_lock);
158 return data;
161 static ssize_t show_temp(struct device *dev, struct device_attribute *da,
162 char *buf)
164 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
165 struct ds1621_data *data = ds1621_update_client(dev);
166 return sprintf(buf, "%d\n",
167 LM75_TEMP_FROM_REG(data->temp[attr->index]));
170 static ssize_t set_temp(struct device *dev, struct device_attribute *da,
171 const char *buf, size_t count)
173 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
174 struct i2c_client *client = to_i2c_client(dev);
175 struct ds1621_data *data = i2c_get_clientdata(client);
176 u16 val = LM75_TEMP_TO_REG(simple_strtol(buf, NULL, 10));
178 mutex_lock(&data->update_lock);
179 data->temp[attr->index] = val;
180 ds1621_write_temp(client, DS1621_REG_TEMP[attr->index],
181 data->temp[attr->index]);
182 mutex_unlock(&data->update_lock);
183 return count;
186 static ssize_t show_alarms(struct device *dev, struct device_attribute *da,
187 char *buf)
189 struct ds1621_data *data = ds1621_update_client(dev);
190 return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->conf));
193 static ssize_t show_alarm(struct device *dev, struct device_attribute *da,
194 char *buf)
196 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
197 struct ds1621_data *data = ds1621_update_client(dev);
198 return sprintf(buf, "%d\n", !!(data->conf & attr->index));
201 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
202 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
203 static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp, set_temp, 1);
204 static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp, set_temp, 2);
205 static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL,
206 DS1621_ALARM_TEMP_LOW);
207 static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL,
208 DS1621_ALARM_TEMP_HIGH);
210 static struct attribute *ds1621_attributes[] = {
211 &sensor_dev_attr_temp1_input.dev_attr.attr,
212 &sensor_dev_attr_temp1_min.dev_attr.attr,
213 &sensor_dev_attr_temp1_max.dev_attr.attr,
214 &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
215 &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
216 &dev_attr_alarms.attr,
217 NULL
220 static const struct attribute_group ds1621_group = {
221 .attrs = ds1621_attributes,
225 /* Return 0 if detection is successful, -ENODEV otherwise */
226 static int ds1621_detect(struct i2c_client *client,
227 struct i2c_board_info *info)
229 struct i2c_adapter *adapter = client->adapter;
230 int conf, temp;
231 int i;
233 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
234 | I2C_FUNC_SMBUS_WORD_DATA
235 | I2C_FUNC_SMBUS_WRITE_BYTE))
236 return -ENODEV;
238 /* Now, we do the remaining detection. It is lousy. */
239 /* The NVB bit should be low if no EEPROM write has been requested
240 during the latest 10ms, which is highly improbable in our case. */
241 conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
242 if (conf < 0 || conf & DS1621_REG_CONFIG_NVB)
243 return -ENODEV;
244 /* The 7 lowest bits of a temperature should always be 0. */
245 for (i = 0; i < ARRAY_SIZE(DS1621_REG_TEMP); i++) {
246 temp = i2c_smbus_read_word_data(client, DS1621_REG_TEMP[i]);
247 if (temp < 0 || (temp & 0x7f00))
248 return -ENODEV;
251 strlcpy(info->type, "ds1621", I2C_NAME_SIZE);
253 return 0;
256 static int ds1621_probe(struct i2c_client *client,
257 const struct i2c_device_id *id)
259 struct ds1621_data *data;
260 int err;
262 data = kzalloc(sizeof(struct ds1621_data), GFP_KERNEL);
263 if (!data) {
264 err = -ENOMEM;
265 goto exit;
268 i2c_set_clientdata(client, data);
269 mutex_init(&data->update_lock);
271 /* Initialize the DS1621 chip */
272 ds1621_init_client(client);
274 /* Register sysfs hooks */
275 if ((err = sysfs_create_group(&client->dev.kobj, &ds1621_group)))
276 goto exit_free;
278 data->hwmon_dev = hwmon_device_register(&client->dev);
279 if (IS_ERR(data->hwmon_dev)) {
280 err = PTR_ERR(data->hwmon_dev);
281 goto exit_remove_files;
284 return 0;
286 exit_remove_files:
287 sysfs_remove_group(&client->dev.kobj, &ds1621_group);
288 exit_free:
289 kfree(data);
290 exit:
291 return err;
294 static int ds1621_remove(struct i2c_client *client)
296 struct ds1621_data *data = i2c_get_clientdata(client);
298 hwmon_device_unregister(data->hwmon_dev);
299 sysfs_remove_group(&client->dev.kobj, &ds1621_group);
301 kfree(data);
303 return 0;
306 static const struct i2c_device_id ds1621_id[] = {
307 { "ds1621", 0 },
308 { "ds1625", 0 },
311 MODULE_DEVICE_TABLE(i2c, ds1621_id);
313 /* This is the driver that will be inserted */
314 static struct i2c_driver ds1621_driver = {
315 .class = I2C_CLASS_HWMON,
316 .driver = {
317 .name = "ds1621",
319 .probe = ds1621_probe,
320 .remove = ds1621_remove,
321 .id_table = ds1621_id,
322 .detect = ds1621_detect,
323 .address_list = normal_i2c,
326 static int __init ds1621_init(void)
328 return i2c_add_driver(&ds1621_driver);
331 static void __exit ds1621_exit(void)
333 i2c_del_driver(&ds1621_driver);
337 MODULE_AUTHOR("Christian W. Zuckschwerdt <zany@triq.net>");
338 MODULE_DESCRIPTION("DS1621 driver");
339 MODULE_LICENSE("GPL");
341 module_init(ds1621_init);
342 module_exit(ds1621_exit);