?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
sata_via: apply magic FIFO fix to vt6420 too
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / char / synclink.c
bloba2a58004e188eaf2a3be13909c735b7b2a8b39d1
1 /*
2 * linux/drivers/char/synclink.c
3 *
4 * $Id: synclink.c,v 4.38 2005/11/07 16:30:34 paulkf Exp $
5 *
6 * Device driver for Microgate SyncLink ISA and PCI
7 * high speed multiprotocol serial adapters.
8 *
9 * written by Paul Fulghum for Microgate Corporation
10 * paulkf@microgate.com
11 *
12 * Microgate and SyncLink are trademarks of Microgate Corporation
13 *
14 * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
15 *
16 * Original release 01/11/99
17 *
18 * This code is released under the GNU General Public License (GPL)
19 *
20 * This driver is primarily intended for use in synchronous
21 * HDLC mode. Asynchronous mode is also provided.
22 *
23 * When operating in synchronous mode, each call to mgsl_write()
24 * contains exactly one complete HDLC frame. Calling mgsl_put_char
25 * will start assembling an HDLC frame that will not be sent until
26 * mgsl_flush_chars or mgsl_write is called.
27 *
28 * Synchronous receive data is reported as complete frames. To accomplish
29 * this, the TTY flip buffer is bypassed (too small to hold largest
30 * frame and may fragment frames) and the line discipline
31 * receive entry point is called directly.
32 *
33 * This driver has been tested with a slightly modified ppp.c driver
34 * for synchronous PPP.
35 *
36 * 2000/02/16
37 * Added interface for syncppp.c driver (an alternate synchronous PPP
38 * implementation that also supports Cisco HDLC). Each device instance
39 * registers as a tty device AND a network device (if dosyncppp option
40 * is set for the device). The functionality is determined by which
41 * device interface is opened.
42 *
43 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
44 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
45 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
46 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
47 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
48 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
49 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
50 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
51 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
52 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
53 * OF THE POSSIBILITY OF SUCH DAMAGE.
54 */
55
56 #if defined(__i386__)
57 # define BREAKPOINT() asm(" int $3");
58 #else
59 # define BREAKPOINT() { }
60 #endif
61
62 #define MAX_ISA_DEVICES 10
63 #define MAX_PCI_DEVICES 10
64 #define MAX_TOTAL_DEVICES 20
65
66 #include <linux/module.h>
67 #include <linux/errno.h>
68 #include <linux/signal.h>
69 #include <linux/sched.h>
70 #include <linux/timer.h>
71 #include <linux/interrupt.h>
72 #include <linux/pci.h>
73 #include <linux/tty.h>
74 #include <linux/tty_flip.h>
75 #include <linux/serial.h>
76 #include <linux/major.h>
77 #include <linux/string.h>
78 #include <linux/fcntl.h>
79 #include <linux/ptrace.h>
80 #include <linux/ioport.h>
81 #include <linux/mm.h>
82 #include <linux/seq_file.h>
83 #include <linux/slab.h>
84 #include <linux/delay.h>
85 #include <linux/netdevice.h>
86 #include <linux/vmalloc.h>
87 #include <linux/init.h>
88 #include <linux/ioctl.h>
89 #include <linux/synclink.h>
90
91 #include <asm/system.h>
92 #include <asm/io.h>
93 #include <asm/irq.h>
94 #include <asm/dma.h>
95 #include <linux/bitops.h>
96 #include <asm/types.h>
97 #include <linux/termios.h>
98 #include <linux/workqueue.h>
99 #include <linux/hdlc.h>
100 #include <linux/dma-mapping.h>
101
102 #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_MODULE))
103 #define SYNCLINK_GENERIC_HDLC 1
104 #else
105 #define SYNCLINK_GENERIC_HDLC 0
106 #endif
107
108 #define GET_USER(error,value,addr) error = get_user(value,addr)
109 #define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
110 #define PUT_USER(error,value,addr) error = put_user(value,addr)
111 #define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
112
113 #include <asm/uaccess.h>
114
115 #define RCLRVALUE 0xffff
116
117 static MGSL_PARAMS default_params = {
118 MGSL_MODE_HDLC, /* unsigned long mode */
119 0, /* unsigned char loopback; */
120 HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */
121 HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */
122 0, /* unsigned long clock_speed; */
123 0xff, /* unsigned char addr_filter; */
124 HDLC_CRC_16_CCITT, /* unsigned short crc_type; */
125 HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */
126 HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */
127 9600, /* unsigned long data_rate; */
128 8, /* unsigned char data_bits; */
129 1, /* unsigned char stop_bits; */
130 ASYNC_PARITY_NONE /* unsigned char parity; */
131 };
132
133 #define SHARED_MEM_ADDRESS_SIZE 0x40000
134 #define BUFFERLISTSIZE 4096
135 #define DMABUFFERSIZE 4096
136 #define MAXRXFRAMES 7
137
138 typedef struct _DMABUFFERENTRY
139 {
140 u32 phys_addr; /* 32-bit flat physical address of data buffer */
141 volatile u16 count; /* buffer size/data count */
142 volatile u16 status; /* Control/status field */
143 volatile u16 rcc; /* character count field */
144 u16 reserved; /* padding required by 16C32 */
145 u32 link; /* 32-bit flat link to next buffer entry */
146 char *virt_addr; /* virtual address of data buffer */
147 u32 phys_entry; /* physical address of this buffer entry */
148 dma_addr_t dma_addr;
149 } DMABUFFERENTRY, *DMAPBUFFERENTRY;
150
151 /* The queue of BH actions to be performed */
152
153 #define BH_RECEIVE 1
154 #define BH_TRANSMIT 2
155 #define BH_STATUS 4
156
157 #define IO_PIN_SHUTDOWN_LIMIT 100
158
159 struct _input_signal_events {
160 int ri_up;
161 int ri_down;
162 int dsr_up;
163 int dsr_down;
164 int dcd_up;
165 int dcd_down;
166 int cts_up;
167 int cts_down;
168 };
169
170 /* transmit holding buffer definitions*/
171 #define MAX_TX_HOLDING_BUFFERS 5
172 struct tx_holding_buffer {
173 int buffer_size;
174 unsigned char * buffer;
175 };
176
177
178 /*
179 * Device instance data structure
180 */
181
182 struct mgsl_struct {
183 int magic;
184 struct tty_port port;
185 int line;
186 int hw_version;
187
188 struct mgsl_icount icount;
189
190 int timeout;
191 int x_char; /* xon/xoff character */
192 u16 read_status_mask;
193 u16 ignore_status_mask;
194 unsigned char *xmit_buf;
195 int xmit_head;
196 int xmit_tail;
197 int xmit_cnt;
198
199 wait_queue_head_t status_event_wait_q;
200 wait_queue_head_t event_wait_q;
201 struct timer_list tx_timer; /* HDLC transmit timeout timer */
202 struct mgsl_struct *next_device; /* device list link */
203
204 spinlock_t irq_spinlock; /* spinlock for synchronizing with ISR */
205 struct work_struct task; /* task structure for scheduling bh */
206
207 u32 EventMask; /* event trigger mask */
208 u32 RecordedEvents; /* pending events */
209
210 u32 max_frame_size; /* as set by device config */
211
212 u32 pending_bh;
213
214 bool bh_running; /* Protection from multiple */
215 int isr_overflow;
216 bool bh_requested;
217
218 int dcd_chkcount; /* check counts to prevent */
219 int cts_chkcount; /* too many IRQs if a signal */
220 int dsr_chkcount; /* is floating */
221 int ri_chkcount;
222
223 char *buffer_list; /* virtual address of Rx & Tx buffer lists */
224 u32 buffer_list_phys;
225 dma_addr_t buffer_list_dma_addr;
226
227 unsigned int rx_buffer_count; /* count of total allocated Rx buffers */
228 DMABUFFERENTRY *rx_buffer_list; /* list of receive buffer entries */
229 unsigned int current_rx_buffer;
230
231 int num_tx_dma_buffers; /* number of tx dma frames required */
232 int tx_dma_buffers_used;
233 unsigned int tx_buffer_count; /* count of total allocated Tx buffers */
234 DMABUFFERENTRY *tx_buffer_list; /* list of transmit buffer entries */
235 int start_tx_dma_buffer; /* tx dma buffer to start tx dma operation */
236 int current_tx_buffer; /* next tx dma buffer to be loaded */
237
238 unsigned char *intermediate_rxbuffer;
239
240 int num_tx_holding_buffers; /* number of tx holding buffer allocated */
241 int get_tx_holding_index; /* next tx holding buffer for adapter to load */
242 int put_tx_holding_index; /* next tx holding buffer to store user request */
243 int tx_holding_count; /* number of tx holding buffers waiting */
244 struct tx_holding_buffer tx_holding_buffers[MAX_TX_HOLDING_BUFFERS];
245
246 bool rx_enabled;
247 bool rx_overflow;
248 bool rx_rcc_underrun;
249
250 bool tx_enabled;
251 bool tx_active;
252 u32 idle_mode;
253
254 u16 cmr_value;
255 u16 tcsr_value;
256
257 char device_name[25]; /* device instance name */
258
259 unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */
260 unsigned char bus; /* expansion bus number (zero based) */
261 unsigned char function; /* PCI device number */
262
263 unsigned int io_base; /* base I/O address of adapter */
264 unsigned int io_addr_size; /* size of the I/O address range */
265 bool io_addr_requested; /* true if I/O address requested */
266
267 unsigned int irq_level; /* interrupt level */
268 unsigned long irq_flags;
269 bool irq_requested; /* true if IRQ requested */
270
271 unsigned int dma_level; /* DMA channel */
272 bool dma_requested; /* true if dma channel requested */
273
274 u16 mbre_bit;
275 u16 loopback_bits;
276 u16 usc_idle_mode;
277
278 MGSL_PARAMS params; /* communications parameters */
279
280 unsigned char serial_signals; /* current serial signal states */
281
282 bool irq_occurred; /* for diagnostics use */
283 unsigned int init_error; /* Initialization startup error (DIAGS) */
284 int fDiagnosticsmode; /* Driver in Diagnostic mode? (DIAGS) */
285
286 u32 last_mem_alloc;
287 unsigned char* memory_base; /* shared memory address (PCI only) */
288 u32 phys_memory_base;
289 bool shared_mem_requested;
290
291 unsigned char* lcr_base; /* local config registers (PCI only) */
292 u32 phys_lcr_base;
293 u32 lcr_offset;
294 bool lcr_mem_requested;
295
296 u32 misc_ctrl_value;
297 char flag_buf[MAX_ASYNC_BUFFER_SIZE];
298 char char_buf[MAX_ASYNC_BUFFER_SIZE];
299 bool drop_rts_on_tx_done;
300
301 bool loopmode_insert_requested;
302 bool loopmode_send_done_requested;
303
304 struct _input_signal_events input_signal_events;
305
306 /* generic HDLC device parts */
307 int netcount;
308 spinlock_t netlock;
309
310 #if SYNCLINK_GENERIC_HDLC
311 struct net_device *netdev;
312 #endif
313 };
314
315 #define MGSL_MAGIC 0x5401
316
317 /*
318 * The size of the serial xmit buffer is 1 page, or 4096 bytes
319 */
320 #ifndef SERIAL_XMIT_SIZE
321 #define SERIAL_XMIT_SIZE 4096
322 #endif
323
324 /*
325 * These macros define the offsets used in calculating the
326 * I/O address of the specified USC registers.
327 */
328
329
330 #define DCPIN 2 /* Bit 1 of I/O address */
331 #define SDPIN 4 /* Bit 2 of I/O address */
332
333 #define DCAR 0 /* DMA command/address register */
334 #define CCAR SDPIN /* channel command/address register */
335 #define DATAREG DCPIN + SDPIN /* serial data register */
336 #define MSBONLY 0x41
337 #define LSBONLY 0x40
338
339 /*
340 * These macros define the register address (ordinal number)
341 * used for writing address/value pairs to the USC.
342 */
343
344 #define CMR 0x02 /* Channel mode Register */
345 #define CCSR 0x04 /* Channel Command/status Register */
346 #define CCR 0x06 /* Channel Control Register */
347 #define PSR 0x08 /* Port status Register */
348 #define PCR 0x0a /* Port Control Register */
349 #define TMDR 0x0c /* Test mode Data Register */
350 #define TMCR 0x0e /* Test mode Control Register */
351 #define CMCR 0x10 /* Clock mode Control Register */
352 #define HCR 0x12 /* Hardware Configuration Register */
353 #define IVR 0x14 /* Interrupt Vector Register */
354 #define IOCR 0x16 /* Input/Output Control Register */
355 #define ICR 0x18 /* Interrupt Control Register */
356 #define DCCR 0x1a /* Daisy Chain Control Register */
357 #define MISR 0x1c /* Misc Interrupt status Register */
358 #define SICR 0x1e /* status Interrupt Control Register */
359 #define RDR 0x20 /* Receive Data Register */
360 #define RMR 0x22 /* Receive mode Register */
361 #define RCSR 0x24 /* Receive Command/status Register */
362 #define RICR 0x26 /* Receive Interrupt Control Register */
363 #define RSR 0x28 /* Receive Sync Register */
364 #define RCLR 0x2a /* Receive count Limit Register */
365 #define RCCR 0x2c /* Receive Character count Register */
366 #define TC0R 0x2e /* Time Constant 0 Register */
367 #define TDR 0x30 /* Transmit Data Register */
368 #define TMR 0x32 /* Transmit mode Register */
369 #define TCSR 0x34 /* Transmit Command/status Register */
370 #define TICR 0x36 /* Transmit Interrupt Control Register */
371 #define TSR 0x38 /* Transmit Sync Register */
372 #define TCLR 0x3a /* Transmit count Limit Register */
373 #define TCCR 0x3c /* Transmit Character count Register */
374 #define TC1R 0x3e /* Time Constant 1 Register */
375
376
377 /*
378 * MACRO DEFINITIONS FOR DMA REGISTERS
379 */
380
381 #define DCR 0x06 /* DMA Control Register (shared) */
382 #define DACR 0x08 /* DMA Array count Register (shared) */
383 #define BDCR 0x12 /* Burst/Dwell Control Register (shared) */
384 #define DIVR 0x14 /* DMA Interrupt Vector Register (shared) */
385 #define DICR 0x18 /* DMA Interrupt Control Register (shared) */
386 #define CDIR 0x1a /* Clear DMA Interrupt Register (shared) */
387 #define SDIR 0x1c /* Set DMA Interrupt Register (shared) */
388
389 #define TDMR 0x02 /* Transmit DMA mode Register */
390 #define TDIAR 0x1e /* Transmit DMA Interrupt Arm Register */
391 #define TBCR 0x2a /* Transmit Byte count Register */
392 #define TARL 0x2c /* Transmit Address Register (low) */
393 #define TARU 0x2e /* Transmit Address Register (high) */
394 #define NTBCR 0x3a /* Next Transmit Byte count Register */
395 #define NTARL 0x3c /* Next Transmit Address Register (low) */
396 #define NTARU 0x3e /* Next Transmit Address Register (high) */
397
398 #define RDMR 0x82 /* Receive DMA mode Register (non-shared) */
399 #define RDIAR 0x9e /* Receive DMA Interrupt Arm Register */
400 #define RBCR 0xaa /* Receive Byte count Register */
401 #define RARL 0xac /* Receive Address Register (low) */
402 #define RARU 0xae /* Receive Address Register (high) */
403 #define NRBCR 0xba /* Next Receive Byte count Register */
404 #define NRARL 0xbc /* Next Receive Address Register (low) */
405 #define NRARU 0xbe /* Next Receive Address Register (high) */
406
407
408 /*
409 * MACRO DEFINITIONS FOR MODEM STATUS BITS
410 */
411
412 #define MODEMSTATUS_DTR 0x80
413 #define MODEMSTATUS_DSR 0x40
414 #define MODEMSTATUS_RTS 0x20
415 #define MODEMSTATUS_CTS 0x10
416 #define MODEMSTATUS_RI 0x04
417 #define MODEMSTATUS_DCD 0x01
418
419
420 /*
421 * Channel Command/Address Register (CCAR) Command Codes
422 */
423
424 #define RTCmd_Null 0x0000
425 #define RTCmd_ResetHighestIus 0x1000
426 #define RTCmd_TriggerChannelLoadDma 0x2000
427 #define RTCmd_TriggerRxDma 0x2800
428 #define RTCmd_TriggerTxDma 0x3000
429 #define RTCmd_TriggerRxAndTxDma 0x3800
430 #define RTCmd_PurgeRxFifo 0x4800
431 #define RTCmd_PurgeTxFifo 0x5000
432 #define RTCmd_PurgeRxAndTxFifo 0x5800
433 #define RTCmd_LoadRcc 0x6800
434 #define RTCmd_LoadTcc 0x7000
435 #define RTCmd_LoadRccAndTcc 0x7800
436 #define RTCmd_LoadTC0 0x8800
437 #define RTCmd_LoadTC1 0x9000
438 #define RTCmd_LoadTC0AndTC1 0x9800
439 #define RTCmd_SerialDataLSBFirst 0xa000
440 #define RTCmd_SerialDataMSBFirst 0xa800
441 #define RTCmd_SelectBigEndian 0xb000
442 #define RTCmd_SelectLittleEndian 0xb800
443
444
445 /*
446 * DMA Command/Address Register (DCAR) Command Codes
447 */
448
449 #define DmaCmd_Null 0x0000
450 #define DmaCmd_ResetTxChannel 0x1000
451 #define DmaCmd_ResetRxChannel 0x1200
452 #define DmaCmd_StartTxChannel 0x2000
453 #define DmaCmd_StartRxChannel 0x2200
454 #define DmaCmd_ContinueTxChannel 0x3000
455 #define DmaCmd_ContinueRxChannel 0x3200
456 #define DmaCmd_PauseTxChannel 0x4000
457 #define DmaCmd_PauseRxChannel 0x4200
458 #define DmaCmd_AbortTxChannel 0x5000
459 #define DmaCmd_AbortRxChannel 0x5200
460 #define DmaCmd_InitTxChannel 0x7000
461 #define DmaCmd_InitRxChannel 0x7200
462 #define DmaCmd_ResetHighestDmaIus 0x8000
463 #define DmaCmd_ResetAllChannels 0x9000
464 #define DmaCmd_StartAllChannels 0xa000
465 #define DmaCmd_ContinueAllChannels 0xb000
466 #define DmaCmd_PauseAllChannels 0xc000
467 #define DmaCmd_AbortAllChannels 0xd000
468 #define DmaCmd_InitAllChannels 0xf000
469
470 #define TCmd_Null 0x0000
471 #define TCmd_ClearTxCRC 0x2000
472 #define TCmd_SelectTicrTtsaData 0x4000
473 #define TCmd_SelectTicrTxFifostatus 0x5000
474 #define TCmd_SelectTicrIntLevel 0x6000
475 #define TCmd_SelectTicrdma_level 0x7000
476 #define TCmd_SendFrame 0x8000
477 #define TCmd_SendAbort 0x9000
478 #define TCmd_EnableDleInsertion 0xc000
479 #define TCmd_DisableDleInsertion 0xd000
480 #define TCmd_ClearEofEom 0xe000
481 #define TCmd_SetEofEom 0xf000
482
483 #define RCmd_Null 0x0000
484 #define RCmd_ClearRxCRC 0x2000
485 #define RCmd_EnterHuntmode 0x3000
486 #define RCmd_SelectRicrRtsaData 0x4000
487 #define RCmd_SelectRicrRxFifostatus 0x5000
488 #define RCmd_SelectRicrIntLevel 0x6000
489 #define RCmd_SelectRicrdma_level 0x7000
490
491 /*
492 * Bits for enabling and disabling IRQs in Interrupt Control Register (ICR)
493 */
494
495 #define RECEIVE_STATUS BIT5
496 #define RECEIVE_DATA BIT4
497 #define TRANSMIT_STATUS BIT3
498 #define TRANSMIT_DATA BIT2
499 #define IO_PIN BIT1
500 #define MISC BIT0
501
502
503 /*
504 * Receive status Bits in Receive Command/status Register RCSR
505 */
506
507 #define RXSTATUS_SHORT_FRAME BIT8
508 #define RXSTATUS_CODE_VIOLATION BIT8
509 #define RXSTATUS_EXITED_HUNT BIT7
510 #define RXSTATUS_IDLE_RECEIVED BIT6
511 #define RXSTATUS_BREAK_RECEIVED BIT5
512 #define RXSTATUS_ABORT_RECEIVED BIT5
513 #define RXSTATUS_RXBOUND BIT4
514 #define RXSTATUS_CRC_ERROR BIT3
515 #define RXSTATUS_FRAMING_ERROR BIT3
516 #define RXSTATUS_ABORT BIT2
517 #define RXSTATUS_PARITY_ERROR BIT2
518 #define RXSTATUS_OVERRUN BIT1
519 #define RXSTATUS_DATA_AVAILABLE BIT0
520 #define RXSTATUS_ALL 0x01f6
521 #define usc_UnlatchRxstatusBits(a,b) usc_OutReg( (a), RCSR, (u16)((b) & RXSTATUS_ALL) )
522
523 /*
524 * Values for setting transmit idle mode in
525 * Transmit Control/status Register (TCSR)
526 */
527 #define IDLEMODE_FLAGS 0x0000
528 #define IDLEMODE_ALT_ONE_ZERO 0x0100
529 #define IDLEMODE_ZERO 0x0200
530 #define IDLEMODE_ONE 0x0300
531 #define IDLEMODE_ALT_MARK_SPACE 0x0500
532 #define IDLEMODE_SPACE 0x0600
533 #define IDLEMODE_MARK 0x0700
534 #define IDLEMODE_MASK 0x0700
535
536 /*
537 * IUSC revision identifiers
538 */
539 #define IUSC_SL1660 0x4d44
540 #define IUSC_PRE_SL1660 0x4553
541
542 /*
543 * Transmit status Bits in Transmit Command/status Register (TCSR)
544 */
545
546 #define TCSR_PRESERVE 0x0F00
547
548 #define TCSR_UNDERWAIT BIT11
549 #define TXSTATUS_PREAMBLE_SENT BIT7
550 #define TXSTATUS_IDLE_SENT BIT6
551 #define TXSTATUS_ABORT_SENT BIT5
552 #define TXSTATUS_EOF_SENT BIT4
553 #define TXSTATUS_EOM_SENT BIT4
554 #define TXSTATUS_CRC_SENT BIT3
555 #define TXSTATUS_ALL_SENT BIT2
556 #define TXSTATUS_UNDERRUN BIT1
557 #define TXSTATUS_FIFO_EMPTY BIT0
558 #define TXSTATUS_ALL 0x00fa
559 #define usc_UnlatchTxstatusBits(a,b) usc_OutReg( (a), TCSR, (u16)((a)->tcsr_value + ((b) & 0x00FF)) )
560
561
562 #define MISCSTATUS_RXC_LATCHED BIT15
563 #define MISCSTATUS_RXC BIT14
564 #define MISCSTATUS_TXC_LATCHED BIT13
565 #define MISCSTATUS_TXC BIT12
566 #define MISCSTATUS_RI_LATCHED BIT11
567 #define MISCSTATUS_RI BIT10
568 #define MISCSTATUS_DSR_LATCHED BIT9
569 #define MISCSTATUS_DSR BIT8
570 #define MISCSTATUS_DCD_LATCHED BIT7
571 #define MISCSTATUS_DCD BIT6
572 #define MISCSTATUS_CTS_LATCHED BIT5
573 #define MISCSTATUS_CTS BIT4
574 #define MISCSTATUS_RCC_UNDERRUN BIT3
575 #define MISCSTATUS_DPLL_NO_SYNC BIT2
576 #define MISCSTATUS_BRG1_ZERO BIT1
577 #define MISCSTATUS_BRG0_ZERO BIT0
578
579 #define usc_UnlatchIostatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0xaaa0))
580 #define usc_UnlatchMiscstatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0x000f))
581
582 #define SICR_RXC_ACTIVE BIT15
583 #define SICR_RXC_INACTIVE BIT14
584 #define SICR_RXC (BIT15+BIT14)
585 #define SICR_TXC_ACTIVE BIT13
586 #define SICR_TXC_INACTIVE BIT12
587 #define SICR_TXC (BIT13+BIT12)
588 #define SICR_RI_ACTIVE BIT11
589 #define SICR_RI_INACTIVE BIT10
590 #define SICR_RI (BIT11+BIT10)
591 #define SICR_DSR_ACTIVE BIT9
592 #define SICR_DSR_INACTIVE BIT8
593 #define SICR_DSR (BIT9+BIT8)
594 #define SICR_DCD_ACTIVE BIT7
595 #define SICR_DCD_INACTIVE BIT6
596 #define SICR_DCD (BIT7+BIT6)
597 #define SICR_CTS_ACTIVE BIT5
598 #define SICR_CTS_INACTIVE BIT4
599 #define SICR_CTS (BIT5+BIT4)
600 #define SICR_RCC_UNDERFLOW BIT3
601 #define SICR_DPLL_NO_SYNC BIT2
602 #define SICR_BRG1_ZERO BIT1
603 #define SICR_BRG0_ZERO BIT0
604
605 void usc_DisableMasterIrqBit( struct mgsl_struct *info );
606 void usc_EnableMasterIrqBit( struct mgsl_struct *info );
607 void usc_EnableInterrupts( struct mgsl_struct *info, u16 IrqMask );
608 void usc_DisableInterrupts( struct mgsl_struct *info, u16 IrqMask );
609 void usc_ClearIrqPendingBits( struct mgsl_struct *info, u16 IrqMask );
610
611 #define usc_EnableInterrupts( a, b ) \
612 usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0xc0 + (b)) )
613
614 #define usc_DisableInterrupts( a, b ) \
615 usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0x80 + (b)) )
616
617 #define usc_EnableMasterIrqBit(a) \
618 usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0x0f00) + 0xb000) )
619
620 #define usc_DisableMasterIrqBit(a) \
621 usc_OutReg( (a), ICR, (u16)(usc_InReg((a),ICR) & 0x7f00) )
622
623 #define usc_ClearIrqPendingBits( a, b ) usc_OutReg( (a), DCCR, 0x40 + (b) )
624
625 /*
626 * Transmit status Bits in Transmit Control status Register (TCSR)
627 * and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0)
628 */
629
630 #define TXSTATUS_PREAMBLE_SENT BIT7
631 #define TXSTATUS_IDLE_SENT BIT6
632 #define TXSTATUS_ABORT_SENT BIT5
633 #define TXSTATUS_EOF BIT4
634 #define TXSTATUS_CRC_SENT BIT3
635 #define TXSTATUS_ALL_SENT BIT2
636 #define TXSTATUS_UNDERRUN BIT1
637 #define TXSTATUS_FIFO_EMPTY BIT0
638
639 #define DICR_MASTER BIT15
640 #define DICR_TRANSMIT BIT0
641 #define DICR_RECEIVE BIT1
642
643 #define usc_EnableDmaInterrupts(a,b) \
644 usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) | (b)) )
645
646 #define usc_DisableDmaInterrupts(a,b) \
647 usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) & ~(b)) )
648
649 #define usc_EnableStatusIrqs(a,b) \
650 usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) | (b)) )
651
652 #define usc_DisablestatusIrqs(a,b) \
653 usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) & ~(b)) )
654
655 /* Transmit status Bits in Transmit Control status Register (TCSR) */
656 /* and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0) */
657
658
659 #define DISABLE_UNCONDITIONAL 0
660 #define DISABLE_END_OF_FRAME 1
661 #define ENABLE_UNCONDITIONAL 2
662 #define ENABLE_AUTO_CTS 3
663 #define ENABLE_AUTO_DCD 3
664 #define usc_EnableTransmitter(a,b) \
665 usc_OutReg( (a), TMR, (u16)((usc_InReg((a),TMR) & 0xfffc) | (b)) )
666 #define usc_EnableReceiver(a,b) \
667 usc_OutReg( (a), RMR, (u16)((usc_InReg((a),RMR) & 0xfffc) | (b)) )
668
669 static u16 usc_InDmaReg( struct mgsl_struct *info, u16 Port );
670 static void usc_OutDmaReg( struct mgsl_struct *info, u16 Port, u16 Value );
671 static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd );
672
673 static u16 usc_InReg( struct mgsl_struct *info, u16 Port );
674 static void usc_OutReg( struct mgsl_struct *info, u16 Port, u16 Value );
675 static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd );
676 void usc_RCmd( struct mgsl_struct *info, u16 Cmd );
677 void usc_TCmd( struct mgsl_struct *info, u16 Cmd );
678
679 #define usc_TCmd(a,b) usc_OutReg((a), TCSR, (u16)((a)->tcsr_value + (b)))
680 #define usc_RCmd(a,b) usc_OutReg((a), RCSR, (b))
681
682 #define usc_SetTransmitSyncChars(a,s0,s1) usc_OutReg((a), TSR, (u16)(((u16)s0<<8)|(u16)s1))
683
684 static void usc_process_rxoverrun_sync( struct mgsl_struct *info );
685 static void usc_start_receiver( struct mgsl_struct *info );
686 static void usc_stop_receiver( struct mgsl_struct *info );
687
688 static void usc_start_transmitter( struct mgsl_struct *info );
689 static void usc_stop_transmitter( struct mgsl_struct *info );
690 static void usc_set_txidle( struct mgsl_struct *info );
691 static void usc_load_txfifo( struct mgsl_struct *info );
692
693 static void usc_enable_aux_clock( struct mgsl_struct *info, u32 DataRate );
694 static void usc_enable_loopback( struct mgsl_struct *info, int enable );
695
696 static void usc_get_serial_signals( struct mgsl_struct *info );
697 static void usc_set_serial_signals( struct mgsl_struct *info );
698
699 static void usc_reset( struct mgsl_struct *info );
700
701 static void usc_set_sync_mode( struct mgsl_struct *info );
702 static void usc_set_sdlc_mode( struct mgsl_struct *info );
703 static void usc_set_async_mode( struct mgsl_struct *info );
704 static void usc_enable_async_clock( struct mgsl_struct *info, u32 DataRate );
705
706 static void usc_loopback_frame( struct mgsl_struct *info );
707
708 static void mgsl_tx_timeout(unsigned long context);
709
710
711 static void usc_loopmode_cancel_transmit( struct mgsl_struct * info );
712 static void usc_loopmode_insert_request( struct mgsl_struct * info );
713 static int usc_loopmode_active( struct mgsl_struct * info);
714 static void usc_loopmode_send_done( struct mgsl_struct * info );
715
716 static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg);
717
718 #if SYNCLINK_GENERIC_HDLC
719 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
720 static void hdlcdev_tx_done(struct mgsl_struct *info);
721 static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size);
722 static int hdlcdev_init(struct mgsl_struct *info);
723 static void hdlcdev_exit(struct mgsl_struct *info);
724 #endif
725
726 /*
727 * Defines a BUS descriptor value for the PCI adapter
728 * local bus address ranges.
729 */
730
731 #define BUS_DESCRIPTOR( WrHold, WrDly, RdDly, Nwdd, Nwad, Nxda, Nrdd, Nrad ) \
732 (0x00400020 + \
733 ((WrHold) << 30) + \
734 ((WrDly) << 28) + \
735 ((RdDly) << 26) + \
736 ((Nwdd) << 20) + \
737 ((Nwad) << 15) + \
738 ((Nxda) << 13) + \
739 ((Nrdd) << 11) + \
740 ((Nrad) << 6) )
741
742 static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit);
743
744 /*
745 * Adapter diagnostic routines
746 */
747 static bool mgsl_register_test( struct mgsl_struct *info );
748 static bool mgsl_irq_test( struct mgsl_struct *info );
749 static bool mgsl_dma_test( struct mgsl_struct *info );
750 static bool mgsl_memory_test( struct mgsl_struct *info );
751 static int mgsl_adapter_test( struct mgsl_struct *info );
752
753 /*
754 * device and resource management routines
755 */
756 static int mgsl_claim_resources(struct mgsl_struct *info);
757 static void mgsl_release_resources(struct mgsl_struct *info);
758 static void mgsl_add_device(struct mgsl_struct *info);
759 static struct mgsl_struct* mgsl_allocate_device(void);
760
761 /*
762 * DMA buffer manupulation functions.
763 */
764 static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex );
765 static bool mgsl_get_rx_frame( struct mgsl_struct *info );
766 static bool mgsl_get_raw_rx_frame( struct mgsl_struct *info );
767 static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info );
768 static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info );
769 static int num_free_tx_dma_buffers(struct mgsl_struct *info);
770 static void mgsl_load_tx_dma_buffer( struct mgsl_struct *info, const char *Buffer, unsigned int BufferSize);
771 static void mgsl_load_pci_memory(char* TargetPtr, const char* SourcePtr, unsigned short count);
772
773 /*
774 * DMA and Shared Memory buffer allocation and formatting
775 */
776 static int mgsl_allocate_dma_buffers(struct mgsl_struct *info);
777 static void mgsl_free_dma_buffers(struct mgsl_struct *info);
778 static int mgsl_alloc_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount);
779 static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount);
780 static int mgsl_alloc_buffer_list_memory(struct mgsl_struct *info);
781 static void mgsl_free_buffer_list_memory(struct mgsl_struct *info);
782 static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info);
783 static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info);
784 static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info);
785 static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info);
786 static bool load_next_tx_holding_buffer(struct mgsl_struct *info);
787 static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize);
788
789 /*
790 * Bottom half interrupt handlers
791 */
792 static void mgsl_bh_handler(struct work_struct *work);
793 static void mgsl_bh_receive(struct mgsl_struct *info);
794 static void mgsl_bh_transmit(struct mgsl_struct *info);
795 static void mgsl_bh_status(struct mgsl_struct *info);
796
797 /*
798 * Interrupt handler routines and dispatch table.
799 */
800 static void mgsl_isr_null( struct mgsl_struct *info );
801 static void mgsl_isr_transmit_data( struct mgsl_struct *info );
802 static void mgsl_isr_receive_data( struct mgsl_struct *info );
803 static void mgsl_isr_receive_status( struct mgsl_struct *info );
804 static void mgsl_isr_transmit_status( struct mgsl_struct *info );
805 static void mgsl_isr_io_pin( struct mgsl_struct *info );
806 static void mgsl_isr_misc( struct mgsl_struct *info );
807 static void mgsl_isr_receive_dma( struct mgsl_struct *info );
808 static void mgsl_isr_transmit_dma( struct mgsl_struct *info );
809
810 typedef void (*isr_dispatch_func)(struct mgsl_struct *);
811
812 static isr_dispatch_func UscIsrTable[7] =
813 {
814 mgsl_isr_null,
815 mgsl_isr_misc,
816 mgsl_isr_io_pin,
817 mgsl_isr_transmit_data,
818 mgsl_isr_transmit_status,
819 mgsl_isr_receive_data,
820 mgsl_isr_receive_status
821 };
822
823 /*
824 * ioctl call handlers
825 */
826 static int tiocmget(struct tty_struct *tty, struct file *file);
827 static int tiocmset(struct tty_struct *tty, struct file *file,
828 unsigned int set, unsigned int clear);
829 static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount
830 __user *user_icount);
831 static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params);
832 static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params);
833 static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode);
834 static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode);
835 static int mgsl_txenable(struct mgsl_struct * info, int enable);
836 static int mgsl_txabort(struct mgsl_struct * info);
837 static int mgsl_rxenable(struct mgsl_struct * info, int enable);
838 static int mgsl_wait_event(struct mgsl_struct * info, int __user *mask);
839 static int mgsl_loopmode_send_done( struct mgsl_struct * info );
840
841 /* set non-zero on successful registration with PCI subsystem */
842 static bool pci_registered;
843
844 /*
845 * Global linked list of SyncLink devices
846 */
847 static struct mgsl_struct *mgsl_device_list;
848 static int mgsl_device_count;
849
850 /*
851 * Set this param to non-zero to load eax with the
852 * .text section address and breakpoint on module load.
853 * This is useful for use with gdb and add-symbol-file command.
854 */
855 static int break_on_load;
856
857 /*
858 * Driver major number, defaults to zero to get auto
859 * assigned major number. May be forced as module parameter.
860 */
861 static int ttymajor;
862
863 /*
864 * Array of user specified options for ISA adapters.
865 */
866 static int io[MAX_ISA_DEVICES];
867 static int irq[MAX_ISA_DEVICES];
868 static int dma[MAX_ISA_DEVICES];
869 static int debug_level;
870 static int maxframe[MAX_TOTAL_DEVICES];
871 static int txdmabufs[MAX_TOTAL_DEVICES];
872 static int txholdbufs[MAX_TOTAL_DEVICES];
873
874 module_param(break_on_load, bool, 0);
875 module_param(ttymajor, int, 0);
876 module_param_array(io, int, NULL, 0);
877 module_param_array(irq, int, NULL, 0);
878 module_param_array(dma, int, NULL, 0);
879 module_param(debug_level, int, 0);
880 module_param_array(maxframe, int, NULL, 0);
881 module_param_array(txdmabufs, int, NULL, 0);
882 module_param_array(txholdbufs, int, NULL, 0);
883
884 static char *driver_name = "SyncLink serial driver";
885 static char *driver_version = "$Revision: 4.38 $";
886
887 static int synclink_init_one (struct pci_dev *dev,
888 const struct pci_device_id *ent);
889 static void synclink_remove_one (struct pci_dev *dev);
890
891 static struct pci_device_id synclink_pci_tbl[] = {
892 { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_USC, PCI_ANY_ID, PCI_ANY_ID, },
893 { PCI_VENDOR_ID_MICROGATE, 0x0210, PCI_ANY_ID, PCI_ANY_ID, },
894 { 0, }, /* terminate list */
895 };
896 MODULE_DEVICE_TABLE(pci, synclink_pci_tbl);
897
898 MODULE_LICENSE("GPL");
899
900 static struct pci_driver synclink_pci_driver = {
901 .name = "synclink",
902 .id_table = synclink_pci_tbl,
903 .probe = synclink_init_one,
904 .remove = __devexit_p(synclink_remove_one),
905 };
906
907 static struct tty_driver *serial_driver;
908
909 /* number of characters left in xmit buffer before we ask for more */
910 #define WAKEUP_CHARS 256
911
912
913 static void mgsl_change_params(struct mgsl_struct *info);
914 static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout);
915
916 /*
917 * 1st function defined in .text section. Calling this function in
918 * init_module() followed by a breakpoint allows a remote debugger
919 * (gdb) to get the .text address for the add-symbol-file command.
920 * This allows remote debugging of dynamically loadable modules.
921 */
922 static void* mgsl_get_text_ptr(void)
923 {
924 return mgsl_get_text_ptr;
925 }
926
927 static inline int mgsl_paranoia_check(struct mgsl_struct *info,
928 char *name, const char *routine)
929 {
930 #ifdef MGSL_PARANOIA_CHECK
931 static const char *badmagic =
932 "Warning: bad magic number for mgsl struct (%s) in %s\n";
933 static const char *badinfo =
934 "Warning: null mgsl_struct for (%s) in %s\n";
935
936 if (!info) {
937 printk(badinfo, name, routine);
938 return 1;
939 }
940 if (info->magic != MGSL_MAGIC) {
941 printk(badmagic, name, routine);
942 return 1;
943 }
944 #else
945 if (!info)
946 return 1;
947 #endif
948 return 0;
949 }
950
951 /**
952 * line discipline callback wrappers
953 *
954 * The wrappers maintain line discipline references
955 * while calling into the line discipline.
956 *
957 * ldisc_receive_buf - pass receive data to line discipline
958 */
959
960 static void ldisc_receive_buf(struct tty_struct *tty,
961 const __u8 *data, char *flags, int count)
962 {
963 struct tty_ldisc *ld;
964 if (!tty)
965 return;
966 ld = tty_ldisc_ref(tty);
967 if (ld) {
968 if (ld->ops->receive_buf)
969 ld->ops->receive_buf(tty, data, flags, count);
970 tty_ldisc_deref(ld);
971 }
972 }
973
974 /* mgsl_stop() throttle (stop) transmitter
975 *
976 * Arguments: tty pointer to tty info structure
977 * Return Value: None
978 */
979 static void mgsl_stop(struct tty_struct *tty)
980 {
981 struct mgsl_struct *info = tty->driver_data;
982 unsigned long flags;
983
984 if (mgsl_paranoia_check(info, tty->name, "mgsl_stop"))
985 return;
986
987 if ( debug_level >= DEBUG_LEVEL_INFO )
988 printk("mgsl_stop(%s)\n",info->device_name);
989
990 spin_lock_irqsave(&info->irq_spinlock,flags);
991 if (info->tx_enabled)
992 usc_stop_transmitter(info);
993 spin_unlock_irqrestore(&info->irq_spinlock,flags);
994
995 } /* end of mgsl_stop() */
996
997 /* mgsl_start() release (start) transmitter
998 *
999 * Arguments: tty pointer to tty info structure
1000 * Return Value: None
1001 */
1002 static void mgsl_start(struct tty_struct *tty)
1003 {
1004 struct mgsl_struct *info = tty->driver_data;
1005 unsigned long flags;
1006
1007 if (mgsl_paranoia_check(info, tty->name, "mgsl_start"))
1008 return;
1009
1010 if ( debug_level >= DEBUG_LEVEL_INFO )
1011 printk("mgsl_start(%s)\n",info->device_name);
1012
1013 spin_lock_irqsave(&info->irq_spinlock,flags);
1014 if (!info->tx_enabled)
1015 usc_start_transmitter(info);
1016 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1017
1018 } /* end of mgsl_start() */
1019
1020 /*
1021 * Bottom half work queue access functions
1022 */
1023
1024 /* mgsl_bh_action() Return next bottom half action to perform.
1025 * Return Value: BH action code or 0 if nothing to do.
1026 */
1027 static int mgsl_bh_action(struct mgsl_struct *info)
1028 {
1029 unsigned long flags;
1030 int rc = 0;
1031
1032 spin_lock_irqsave(&info->irq_spinlock,flags);
1033
1034 if (info->pending_bh & BH_RECEIVE) {
1035 info->pending_bh &= ~BH_RECEIVE;
1036 rc = BH_RECEIVE;
1037 } else if (info->pending_bh & BH_TRANSMIT) {
1038 info->pending_bh &= ~BH_TRANSMIT;
1039 rc = BH_TRANSMIT;
1040 } else if (info->pending_bh & BH_STATUS) {
1041 info->pending_bh &= ~BH_STATUS;
1042 rc = BH_STATUS;
1043 }
1044
1045 if (!rc) {
1046 /* Mark BH routine as complete */
1047 info->bh_running = false;
1048 info->bh_requested = false;
1049 }
1050
1051 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1052
1053 return rc;
1054 }
1055
1056 /*
1057 * Perform bottom half processing of work items queued by ISR.
1058 */
1059 static void mgsl_bh_handler(struct work_struct *work)
1060 {
1061 struct mgsl_struct *info =
1062 container_of(work, struct mgsl_struct, task);
1063 int action;
1064
1065 if (!info)
1066 return;
1067
1068 if ( debug_level >= DEBUG_LEVEL_BH )
1069 printk( "%s(%d):mgsl_bh_handler(%s) entry\n",
1070 __FILE__,__LINE__,info->device_name);
1071
1072 info->bh_running = true;
1073
1074 while((action = mgsl_bh_action(info)) != 0) {
1075
1076 /* Process work item */
1077 if ( debug_level >= DEBUG_LEVEL_BH )
1078 printk( "%s(%d):mgsl_bh_handler() work item action=%d\n",
1079 __FILE__,__LINE__,action);
1080
1081 switch (action) {
1082
1083 case BH_RECEIVE:
1084 mgsl_bh_receive(info);
1085 break;
1086 case BH_TRANSMIT:
1087 mgsl_bh_transmit(info);
1088 break;
1089 case BH_STATUS:
1090 mgsl_bh_status(info);
1091 break;
1092 default:
1093 /* unknown work item ID */
1094 printk("Unknown work item ID=%08X!\n", action);
1095 break;
1096 }
1097 }
1098
1099 if ( debug_level >= DEBUG_LEVEL_BH )
1100 printk( "%s(%d):mgsl_bh_handler(%s) exit\n",
1101 __FILE__,__LINE__,info->device_name);
1102 }
1103
1104 static void mgsl_bh_receive(struct mgsl_struct *info)
1105 {
1106 bool (*get_rx_frame)(struct mgsl_struct *info) =
1107 (info->params.mode == MGSL_MODE_HDLC ? mgsl_get_rx_frame : mgsl_get_raw_rx_frame);
1108
1109 if ( debug_level >= DEBUG_LEVEL_BH )
1110 printk( "%s(%d):mgsl_bh_receive(%s)\n",
1111 __FILE__,__LINE__,info->device_name);
1112
1113 do
1114 {
1115 if (info->rx_rcc_underrun) {
1116 unsigned long flags;
1117 spin_lock_irqsave(&info->irq_spinlock,flags);
1118 usc_start_receiver(info);
1119 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1120 return;
1121 }
1122 } while(get_rx_frame(info));
1123 }
1124
1125 static void mgsl_bh_transmit(struct mgsl_struct *info)
1126 {
1127 struct tty_struct *tty = info->port.tty;
1128 unsigned long flags;
1129
1130 if ( debug_level >= DEBUG_LEVEL_BH )
1131 printk( "%s(%d):mgsl_bh_transmit() entry on %s\n",
1132 __FILE__,__LINE__,info->device_name);
1133
1134 if (tty)
1135 tty_wakeup(tty);
1136
1137 /* if transmitter idle and loopmode_send_done_requested
1138 * then start echoing RxD to TxD
1139 */
1140 spin_lock_irqsave(&info->irq_spinlock,flags);
1141 if ( !info->tx_active && info->loopmode_send_done_requested )
1142 usc_loopmode_send_done( info );
1143 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1144 }
1145
1146 static void mgsl_bh_status(struct mgsl_struct *info)
1147 {
1148 if ( debug_level >= DEBUG_LEVEL_BH )
1149 printk( "%s(%d):mgsl_bh_status() entry on %s\n",
1150 __FILE__,__LINE__,info->device_name);
1151
1152 info->ri_chkcount = 0;
1153 info->dsr_chkcount = 0;
1154 info->dcd_chkcount = 0;
1155 info->cts_chkcount = 0;
1156 }
1157
1158 /* mgsl_isr_receive_status()
1159 *
1160 * Service a receive status interrupt. The type of status
1161 * interrupt is indicated by the state of the RCSR.
1162 * This is only used for HDLC mode.
1163 *
1164 * Arguments: info pointer to device instance data
1165 * Return Value: None
1166 */
1167 static void mgsl_isr_receive_status( struct mgsl_struct *info )
1168 {
1169 u16 status = usc_InReg( info, RCSR );
1170
1171 if ( debug_level >= DEBUG_LEVEL_ISR )
1172 printk("%s(%d):mgsl_isr_receive_status status=%04X\n",
1173 __FILE__,__LINE__,status);
1174
1175 if ( (status & RXSTATUS_ABORT_RECEIVED) &&
1176 info->loopmode_insert_requested &&
1177 usc_loopmode_active(info) )
1178 {
1179 ++info->icount.rxabort;
1180 info->loopmode_insert_requested = false;
1181
1182 /* clear CMR:13 to start echoing RxD to TxD */
1183 info->cmr_value &= ~BIT13;
1184 usc_OutReg(info, CMR, info->cmr_value);
1185
1186 /* disable received abort irq (no longer required) */
1187 usc_OutReg(info, RICR,
1188 (usc_InReg(info, RICR) & ~RXSTATUS_ABORT_RECEIVED));
1189 }
1190
1191 if (status & (RXSTATUS_EXITED_HUNT + RXSTATUS_IDLE_RECEIVED)) {
1192 if (status & RXSTATUS_EXITED_HUNT)
1193 info->icount.exithunt++;
1194 if (status & RXSTATUS_IDLE_RECEIVED)
1195 info->icount.rxidle++;
1196 wake_up_interruptible(&info->event_wait_q);
1197 }
1198
1199 if (status & RXSTATUS_OVERRUN){
1200 info->icount.rxover++;
1201 usc_process_rxoverrun_sync( info );
1202 }
1203
1204 usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
1205 usc_UnlatchRxstatusBits( info, status );
1206
1207 } /* end of mgsl_isr_receive_status() */
1208
1209 /* mgsl_isr_transmit_status()
1210 *
1211 * Service a transmit status interrupt
1212 * HDLC mode :end of transmit frame
1213 * Async mode:all data is sent
1214 * transmit status is indicated by bits in the TCSR.
1215 *
1216 * Arguments: info pointer to device instance data
1217 * Return Value: None
1218 */
1219 static void mgsl_isr_transmit_status( struct mgsl_struct *info )
1220 {
1221 u16 status = usc_InReg( info, TCSR );
1222
1223 if ( debug_level >= DEBUG_LEVEL_ISR )
1224 printk("%s(%d):mgsl_isr_transmit_status status=%04X\n",
1225 __FILE__,__LINE__,status);
1226
1227 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
1228 usc_UnlatchTxstatusBits( info, status );
1229
1230 if ( status & (TXSTATUS_UNDERRUN | TXSTATUS_ABORT_SENT) )
1231 {
1232 /* finished sending HDLC abort. This may leave */
1233 /* the TxFifo with data from the aborted frame */
1234 /* so purge the TxFifo. Also shutdown the DMA */
1235 /* channel in case there is data remaining in */
1236 /* the DMA buffer */
1237 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
1238 usc_RTCmd( info, RTCmd_PurgeTxFifo );
1239 }
1240
1241 if ( status & TXSTATUS_EOF_SENT )
1242 info->icount.txok++;
1243 else if ( status & TXSTATUS_UNDERRUN )
1244 info->icount.txunder++;
1245 else if ( status & TXSTATUS_ABORT_SENT )
1246 info->icount.txabort++;
1247 else
1248 info->icount.txunder++;
1249
1250 info->tx_active = false;
1251 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1252 del_timer(&info->tx_timer);
1253
1254 if ( info->drop_rts_on_tx_done ) {
1255 usc_get_serial_signals( info );
1256 if ( info->serial_signals & SerialSignal_RTS ) {
1257 info->serial_signals &= ~SerialSignal_RTS;
1258 usc_set_serial_signals( info );
1259 }
1260 info->drop_rts_on_tx_done = false;
1261 }
1262
1263 #if SYNCLINK_GENERIC_HDLC
1264 if (info->netcount)
1265 hdlcdev_tx_done(info);
1266 else
1267 #endif
1268 {
1269 if (info->port.tty->stopped || info->port.tty->hw_stopped) {
1270 usc_stop_transmitter(info);
1271 return;
1272 }
1273 info->pending_bh |= BH_TRANSMIT;
1274 }
1275
1276 } /* end of mgsl_isr_transmit_status() */
1277
1278 /* mgsl_isr_io_pin()
1279 *
1280 * Service an Input/Output pin interrupt. The type of
1281 * interrupt is indicated by bits in the MISR
1282 *
1283 * Arguments: info pointer to device instance data
1284 * Return Value: None
1285 */
1286 static void mgsl_isr_io_pin( struct mgsl_struct *info )
1287 {
1288 struct mgsl_icount *icount;
1289 u16 status = usc_InReg( info, MISR );
1290
1291 if ( debug_level >= DEBUG_LEVEL_ISR )
1292 printk("%s(%d):mgsl_isr_io_pin status=%04X\n",
1293 __FILE__,__LINE__,status);
1294
1295 usc_ClearIrqPendingBits( info, IO_PIN );
1296 usc_UnlatchIostatusBits( info, status );
1297
1298 if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
1299 MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
1300 icount = &info->icount;
1301 /* update input line counters */
1302 if (status & MISCSTATUS_RI_LATCHED) {
1303 if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1304 usc_DisablestatusIrqs(info,SICR_RI);
1305 icount->rng++;
1306 if ( status & MISCSTATUS_RI )
1307 info->input_signal_events.ri_up++;
1308 else
1309 info->input_signal_events.ri_down++;
1310 }
1311 if (status & MISCSTATUS_DSR_LATCHED) {
1312 if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1313 usc_DisablestatusIrqs(info,SICR_DSR);
1314 icount->dsr++;
1315 if ( status & MISCSTATUS_DSR )
1316 info->input_signal_events.dsr_up++;
1317 else
1318 info->input_signal_events.dsr_down++;
1319 }
1320 if (status & MISCSTATUS_DCD_LATCHED) {
1321 if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1322 usc_DisablestatusIrqs(info,SICR_DCD);
1323 icount->dcd++;
1324 if (status & MISCSTATUS_DCD) {
1325 info->input_signal_events.dcd_up++;
1326 } else
1327 info->input_signal_events.dcd_down++;
1328 #if SYNCLINK_GENERIC_HDLC
1329 if (info->netcount) {
1330 if (status & MISCSTATUS_DCD)
1331 netif_carrier_on(info->netdev);
1332 else
1333 netif_carrier_off(info->netdev);
1334 }
1335 #endif
1336 }
1337 if (status & MISCSTATUS_CTS_LATCHED)
1338 {
1339 if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1340 usc_DisablestatusIrqs(info,SICR_CTS);
1341 icount->cts++;
1342 if ( status & MISCSTATUS_CTS )
1343 info->input_signal_events.cts_up++;
1344 else
1345 info->input_signal_events.cts_down++;
1346 }
1347 wake_up_interruptible(&info->status_event_wait_q);
1348 wake_up_interruptible(&info->event_wait_q);
1349
1350 if ( (info->port.flags & ASYNC_CHECK_CD) &&
1351 (status & MISCSTATUS_DCD_LATCHED) ) {
1352 if ( debug_level >= DEBUG_LEVEL_ISR )
1353 printk("%s CD now %s...", info->device_name,
1354 (status & MISCSTATUS_DCD) ? "on" : "off");
1355 if (status & MISCSTATUS_DCD)
1356 wake_up_interruptible(&info->port.open_wait);
1357 else {
1358 if ( debug_level >= DEBUG_LEVEL_ISR )
1359 printk("doing serial hangup...");
1360 if (info->port.tty)
1361 tty_hangup(info->port.tty);
1362 }
1363 }
1364
1365 if ( (info->port.flags & ASYNC_CTS_FLOW) &&
1366 (status & MISCSTATUS_CTS_LATCHED) ) {
1367 if (info->port.tty->hw_stopped) {
1368 if (status & MISCSTATUS_CTS) {
1369 if ( debug_level >= DEBUG_LEVEL_ISR )
1370 printk("CTS tx start...");
1371 if (info->port.tty)
1372 info->port.tty->hw_stopped = 0;
1373 usc_start_transmitter(info);
1374 info->pending_bh |= BH_TRANSMIT;
1375 return;
1376 }
1377 } else {
1378 if (!(status & MISCSTATUS_CTS)) {
1379 if ( debug_level >= DEBUG_LEVEL_ISR )
1380 printk("CTS tx stop...");
1381 if (info->port.tty)
1382 info->port.tty->hw_stopped = 1;
1383 usc_stop_transmitter(info);
1384 }
1385 }
1386 }
1387 }
1388
1389 info->pending_bh |= BH_STATUS;
1390
1391 /* for diagnostics set IRQ flag */
1392 if ( status & MISCSTATUS_TXC_LATCHED ){
1393 usc_OutReg( info, SICR,
1394 (unsigned short)(usc_InReg(info,SICR) & ~(SICR_TXC_ACTIVE+SICR_TXC_INACTIVE)) );
1395 usc_UnlatchIostatusBits( info, MISCSTATUS_TXC_LATCHED );
1396 info->irq_occurred = true;
1397 }
1398
1399 } /* end of mgsl_isr_io_pin() */
1400
1401 /* mgsl_isr_transmit_data()
1402 *
1403 * Service a transmit data interrupt (async mode only).
1404 *
1405 * Arguments: info pointer to device instance data
1406 * Return Value: None
1407 */
1408 static void mgsl_isr_transmit_data( struct mgsl_struct *info )
1409 {
1410 if ( debug_level >= DEBUG_LEVEL_ISR )
1411 printk("%s(%d):mgsl_isr_transmit_data xmit_cnt=%d\n",
1412 __FILE__,__LINE__,info->xmit_cnt);
1413
1414 usc_ClearIrqPendingBits( info, TRANSMIT_DATA );
1415
1416 if (info->port.tty->stopped || info->port.tty->hw_stopped) {
1417 usc_stop_transmitter(info);
1418 return;
1419 }
1420
1421 if ( info->xmit_cnt )
1422 usc_load_txfifo( info );
1423 else
1424 info->tx_active = false;
1425
1426 if (info->xmit_cnt < WAKEUP_CHARS)
1427 info->pending_bh |= BH_TRANSMIT;
1428
1429 } /* end of mgsl_isr_transmit_data() */
1430
1431 /* mgsl_isr_receive_data()
1432 *
1433 * Service a receive data interrupt. This occurs
1434 * when operating in asynchronous interrupt transfer mode.
1435 * The receive data FIFO is flushed to the receive data buffers.
1436 *
1437 * Arguments: info pointer to device instance data
1438 * Return Value: None
1439 */
1440 static void mgsl_isr_receive_data( struct mgsl_struct *info )
1441 {
1442 int Fifocount;
1443 u16 status;
1444 int work = 0;
1445 unsigned char DataByte;
1446 struct tty_struct *tty = info->port.tty;
1447 struct mgsl_icount *icount = &info->icount;
1448
1449 if ( debug_level >= DEBUG_LEVEL_ISR )
1450 printk("%s(%d):mgsl_isr_receive_data\n",
1451 __FILE__,__LINE__);
1452
1453 usc_ClearIrqPendingBits( info, RECEIVE_DATA );
1454
1455 /* select FIFO status for RICR readback */
1456 usc_RCmd( info, RCmd_SelectRicrRxFifostatus );
1457
1458 /* clear the Wordstatus bit so that status readback */
1459 /* only reflects the status of this byte */
1460 usc_OutReg( info, RICR+LSBONLY, (u16)(usc_InReg(info, RICR+LSBONLY) & ~BIT3 ));
1461
1462 /* flush the receive FIFO */
1463
1464 while( (Fifocount = (usc_InReg(info,RICR) >> 8)) ) {
1465 int flag;
1466
1467 /* read one byte from RxFIFO */
1468 outw( (inw(info->io_base + CCAR) & 0x0780) | (RDR+LSBONLY),
1469 info->io_base + CCAR );
1470 DataByte = inb( info->io_base + CCAR );
1471
1472 /* get the status of the received byte */
1473 status = usc_InReg(info, RCSR);
1474 if ( status & (RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR +
1475 RXSTATUS_OVERRUN + RXSTATUS_BREAK_RECEIVED) )
1476 usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
1477
1478 icount->rx++;
1479
1480 flag = 0;
1481 if ( status & (RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR +
1482 RXSTATUS_OVERRUN + RXSTATUS_BREAK_RECEIVED) ) {
1483 printk("rxerr=%04X\n",status);
1484 /* update error statistics */
1485 if ( status & RXSTATUS_BREAK_RECEIVED ) {
1486 status &= ~(RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR);
1487 icount->brk++;
1488 } else if (status & RXSTATUS_PARITY_ERROR)
1489 icount->parity++;
1490 else if (status & RXSTATUS_FRAMING_ERROR)
1491 icount->frame++;
1492 else if (status & RXSTATUS_OVERRUN) {
1493 /* must issue purge fifo cmd before */
1494 /* 16C32 accepts more receive chars */
1495 usc_RTCmd(info,RTCmd_PurgeRxFifo);
1496 icount->overrun++;
1497 }
1498
1499 /* discard char if tty control flags say so */
1500 if (status & info->ignore_status_mask)
1501 continue;
1502
1503 status &= info->read_status_mask;
1504
1505 if (status & RXSTATUS_BREAK_RECEIVED) {
1506 flag = TTY_BREAK;
1507 if (info->port.flags & ASYNC_SAK)
1508 do_SAK(tty);
1509 } else if (status & RXSTATUS_PARITY_ERROR)
1510 flag = TTY_PARITY;
1511 else if (status & RXSTATUS_FRAMING_ERROR)
1512 flag = TTY_FRAME;
1513 } /* end of if (error) */
1514 tty_insert_flip_char(tty, DataByte, flag);
1515 if (status & RXSTATUS_OVERRUN) {
1516 /* Overrun is special, since it's
1517 * reported immediately, and doesn't
1518 * affect the current character
1519 */
1520 work += tty_insert_flip_char(tty, 0, TTY_OVERRUN);
1521 }
1522 }
1523
1524 if ( debug_level >= DEBUG_LEVEL_ISR ) {
1525 printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
1526 __FILE__,__LINE__,icount->rx,icount->brk,
1527 icount->parity,icount->frame,icount->overrun);
1528 }
1529
1530 if(work)
1531 tty_flip_buffer_push(tty);
1532 }
1533
1534 /* mgsl_isr_misc()
1535 *
1536 * Service a miscellaneous interrupt source.
1537 *
1538 * Arguments: info pointer to device extension (instance data)
1539 * Return Value: None
1540 */
1541 static void mgsl_isr_misc( struct mgsl_struct *info )
1542 {
1543 u16 status = usc_InReg( info, MISR );
1544
1545 if ( debug_level >= DEBUG_LEVEL_ISR )
1546 printk("%s(%d):mgsl_isr_misc status=%04X\n",
1547 __FILE__,__LINE__,status);
1548
1549 if ((status & MISCSTATUS_RCC_UNDERRUN) &&
1550 (info->params.mode == MGSL_MODE_HDLC)) {
1551
1552 /* turn off receiver and rx DMA */
1553 usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
1554 usc_DmaCmd(info, DmaCmd_ResetRxChannel);
1555 usc_UnlatchRxstatusBits(info, RXSTATUS_ALL);
1556 usc_ClearIrqPendingBits(info, RECEIVE_DATA + RECEIVE_STATUS);
1557 usc_DisableInterrupts(info, RECEIVE_DATA + RECEIVE_STATUS);
1558
1559 /* schedule BH handler to restart receiver */
1560 info->pending_bh |= BH_RECEIVE;
1561 info->rx_rcc_underrun = true;
1562 }
1563
1564 usc_ClearIrqPendingBits( info, MISC );
1565 usc_UnlatchMiscstatusBits( info, status );
1566
1567 } /* end of mgsl_isr_misc() */
1568
1569 /* mgsl_isr_null()
1570 *
1571 * Services undefined interrupt vectors from the
1572 * USC. (hence this function SHOULD never be called)
1573 *
1574 * Arguments: info pointer to device extension (instance data)
1575 * Return Value: None
1576 */
1577 static void mgsl_isr_null( struct mgsl_struct *info )
1578 {
1579
1580 } /* end of mgsl_isr_null() */
1581
1582 /* mgsl_isr_receive_dma()
1583 *
1584 * Service a receive DMA channel interrupt.
1585 * For this driver there are two sources of receive DMA interrupts
1586 * as identified in the Receive DMA mode Register (RDMR):
1587 *
1588 * BIT3 EOA/EOL End of List, all receive buffers in receive
1589 * buffer list have been filled (no more free buffers
1590 * available). The DMA controller has shut down.
1591 *
1592 * BIT2 EOB End of Buffer. This interrupt occurs when a receive
1593 * DMA buffer is terminated in response to completion
1594 * of a good frame or a frame with errors. The status
1595 * of the frame is stored in the buffer entry in the
1596 * list of receive buffer entries.
1597 *
1598 * Arguments: info pointer to device instance data
1599 * Return Value: None
1600 */
1601 static void mgsl_isr_receive_dma( struct mgsl_struct *info )
1602 {
1603 u16 status;
1604
1605 /* clear interrupt pending and IUS bit for Rx DMA IRQ */
1606 usc_OutDmaReg( info, CDIR, BIT9+BIT1 );
1607
1608 /* Read the receive DMA status to identify interrupt type. */
1609 /* This also clears the status bits. */
1610 status = usc_InDmaReg( info, RDMR );
1611
1612 if ( debug_level >= DEBUG_LEVEL_ISR )
1613 printk("%s(%d):mgsl_isr_receive_dma(%s) status=%04X\n",
1614 __FILE__,__LINE__,info->device_name,status);
1615
1616 info->pending_bh |= BH_RECEIVE;
1617
1618 if ( status & BIT3 ) {
1619 info->rx_overflow = true;
1620 info->icount.buf_overrun++;
1621 }
1622
1623 } /* end of mgsl_isr_receive_dma() */
1624
1625 /* mgsl_isr_transmit_dma()
1626 *
1627 * This function services a transmit DMA channel interrupt.
1628 *
1629 * For this driver there is one source of transmit DMA interrupts
1630 * as identified in the Transmit DMA Mode Register (TDMR):
1631 *
1632 * BIT2 EOB End of Buffer. This interrupt occurs when a
1633 * transmit DMA buffer has been emptied.
1634 *
1635 * The driver maintains enough transmit DMA buffers to hold at least
1636 * one max frame size transmit frame. When operating in a buffered
1637 * transmit mode, there may be enough transmit DMA buffers to hold at
1638 * least two or more max frame size frames. On an EOB condition,
1639 * determine if there are any queued transmit buffers and copy into
1640 * transmit DMA buffers if we have room.
1641 *
1642 * Arguments: info pointer to device instance data
1643 * Return Value: None
1644 */
1645 static void mgsl_isr_transmit_dma( struct mgsl_struct *info )
1646 {
1647 u16 status;
1648
1649 /* clear interrupt pending and IUS bit for Tx DMA IRQ */
1650 usc_OutDmaReg(info, CDIR, BIT8+BIT0 );
1651
1652 /* Read the transmit DMA status to identify interrupt type. */
1653 /* This also clears the status bits. */
1654
1655 status = usc_InDmaReg( info, TDMR );
1656
1657 if ( debug_level >= DEBUG_LEVEL_ISR )
1658 printk("%s(%d):mgsl_isr_transmit_dma(%s) status=%04X\n",
1659 __FILE__,__LINE__,info->device_name,status);
1660
1661 if ( status & BIT2 ) {
1662 --info->tx_dma_buffers_used;
1663
1664 /* if there are transmit frames queued,
1665 * try to load the next one
1666 */
1667 if ( load_next_tx_holding_buffer(info) ) {
1668 /* if call returns non-zero value, we have
1669 * at least one free tx holding buffer
1670 */
1671 info->pending_bh |= BH_TRANSMIT;
1672 }
1673 }
1674
1675 } /* end of mgsl_isr_transmit_dma() */
1676
1677 /* mgsl_interrupt()
1678 *
1679 * Interrupt service routine entry point.
1680 *
1681 * Arguments:
1682 *
1683 * irq interrupt number that caused interrupt
1684 * dev_id device ID supplied during interrupt registration
1685 *
1686 * Return Value: None
1687 */
1688 static irqreturn_t mgsl_interrupt(int dummy, void *dev_id)
1689 {
1690 struct mgsl_struct *info = dev_id;
1691 u16 UscVector;
1692 u16 DmaVector;
1693
1694 if ( debug_level >= DEBUG_LEVEL_ISR )
1695 printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)entry.\n",
1696 __FILE__, __LINE__, info->irq_level);
1697
1698 spin_lock(&info->irq_spinlock);
1699
1700 for(;;) {
1701 /* Read the interrupt vectors from hardware. */
1702 UscVector = usc_InReg(info, IVR) >> 9;
1703 DmaVector = usc_InDmaReg(info, DIVR);
1704
1705 if ( debug_level >= DEBUG_LEVEL_ISR )
1706 printk("%s(%d):%s UscVector=%08X DmaVector=%08X\n",
1707 __FILE__,__LINE__,info->device_name,UscVector,DmaVector);
1708
1709 if ( !UscVector && !DmaVector )
1710 break;
1711
1712 /* Dispatch interrupt vector */
1713 if ( UscVector )
1714 (*UscIsrTable[UscVector])(info);
1715 else if ( (DmaVector&(BIT10|BIT9)) == BIT10)
1716 mgsl_isr_transmit_dma(info);
1717 else
1718 mgsl_isr_receive_dma(info);
1719
1720 if ( info->isr_overflow ) {
1721 printk(KERN_ERR "%s(%d):%s isr overflow irq=%d\n",
1722 __FILE__, __LINE__, info->device_name, info->irq_level);
1723 usc_DisableMasterIrqBit(info);
1724 usc_DisableDmaInterrupts(info,DICR_MASTER);
1725 break;
1726 }
1727 }
1728
1729 /* Request bottom half processing if there's something
1730 * for it to do and the bh is not already running
1731 */
1732
1733 if ( info->pending_bh && !info->bh_running && !info->bh_requested ) {
1734 if ( debug_level >= DEBUG_LEVEL_ISR )
1735 printk("%s(%d):%s queueing bh task.\n",
1736 __FILE__,__LINE__,info->device_name);
1737 schedule_work(&info->task);
1738 info->bh_requested = true;
1739 }
1740
1741 spin_unlock(&info->irq_spinlock);
1742
1743 if ( debug_level >= DEBUG_LEVEL_ISR )
1744 printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)exit.\n",
1745 __FILE__, __LINE__, info->irq_level);
1746
1747 return IRQ_HANDLED;
1748 } /* end of mgsl_interrupt() */
1749
1750 /* startup()
1751 *
1752 * Initialize and start device.
1753 *
1754 * Arguments: info pointer to device instance data
1755 * Return Value: 0 if success, otherwise error code
1756 */
1757 static int startup(struct mgsl_struct * info)
1758 {
1759 int retval = 0;
1760
1761 if ( debug_level >= DEBUG_LEVEL_INFO )
1762 printk("%s(%d):mgsl_startup(%s)\n",__FILE__,__LINE__,info->device_name);
1763
1764 if (info->port.flags & ASYNC_INITIALIZED)
1765 return 0;
1766
1767 if (!info->xmit_buf) {
1768 /* allocate a page of memory for a transmit buffer */
1769 info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
1770 if (!info->xmit_buf) {
1771 printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
1772 __FILE__,__LINE__,info->device_name);
1773 return -ENOMEM;
1774 }
1775 }
1776
1777 info->pending_bh = 0;
1778
1779 memset(&info->icount, 0, sizeof(info->icount));
1780
1781 setup_timer(&info->tx_timer, mgsl_tx_timeout, (unsigned long)info);
1782
1783 /* Allocate and claim adapter resources */
1784 retval = mgsl_claim_resources(info);
1785
1786 /* perform existence check and diagnostics */
1787 if ( !retval )
1788 retval = mgsl_adapter_test(info);
1789
1790 if ( retval ) {
1791 if (capable(CAP_SYS_ADMIN) && info->port.tty)
1792 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
1793 mgsl_release_resources(info);
1794 return retval;
1795 }
1796
1797 /* program hardware for current parameters */
1798 mgsl_change_params(info);
1799
1800 if (info->port.tty)
1801 clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
1802
1803 info->port.flags |= ASYNC_INITIALIZED;
1804
1805 return 0;
1806
1807 } /* end of startup() */
1808
1809 /* shutdown()
1810 *
1811 * Called by mgsl_close() and mgsl_hangup() to shutdown hardware
1812 *
1813 * Arguments: info pointer to device instance data
1814 * Return Value: None
1815 */
1816 static void shutdown(struct mgsl_struct * info)
1817 {
1818 unsigned long flags;
1819
1820 if (!(info->port.flags & ASYNC_INITIALIZED))
1821 return;
1822
1823 if (debug_level >= DEBUG_LEVEL_INFO)
1824 printk("%s(%d):mgsl_shutdown(%s)\n",
1825 __FILE__,__LINE__, info->device_name );
1826
1827 /* clear status wait queue because status changes */
1828 /* can't happen after shutting down the hardware */
1829 wake_up_interruptible(&info->status_event_wait_q);
1830 wake_up_interruptible(&info->event_wait_q);
1831
1832 del_timer_sync(&info->tx_timer);
1833
1834 if (info->xmit_buf) {
1835 free_page((unsigned long) info->xmit_buf);
1836 info->xmit_buf = NULL;
1837 }
1838
1839 spin_lock_irqsave(&info->irq_spinlock,flags);
1840 usc_DisableMasterIrqBit(info);
1841 usc_stop_receiver(info);
1842 usc_stop_transmitter(info);
1843 usc_DisableInterrupts(info,RECEIVE_DATA + RECEIVE_STATUS +
1844 TRANSMIT_DATA + TRANSMIT_STATUS + IO_PIN + MISC );
1845 usc_DisableDmaInterrupts(info,DICR_MASTER + DICR_TRANSMIT + DICR_RECEIVE);
1846
1847 /* Disable DMAEN (Port 7, Bit 14) */
1848 /* This disconnects the DMA request signal from the ISA bus */
1849 /* on the ISA adapter. This has no effect for the PCI adapter */
1850 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) | BIT14));
1851
1852 /* Disable INTEN (Port 6, Bit12) */
1853 /* This disconnects the IRQ request signal to the ISA bus */
1854 /* on the ISA adapter. This has no effect for the PCI adapter */
1855 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12));
1856
1857 if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
1858 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
1859 usc_set_serial_signals(info);
1860 }
1861
1862 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1863
1864 mgsl_release_resources(info);
1865
1866 if (info->port.tty)
1867 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
1868
1869 info->port.flags &= ~ASYNC_INITIALIZED;
1870
1871 } /* end of shutdown() */
1872
1873 static void mgsl_program_hw(struct mgsl_struct *info)
1874 {
1875 unsigned long flags;
1876
1877 spin_lock_irqsave(&info->irq_spinlock,flags);
1878
1879 usc_stop_receiver(info);
1880 usc_stop_transmitter(info);
1881 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1882
1883 if (info->params.mode == MGSL_MODE_HDLC ||
1884 info->params.mode == MGSL_MODE_RAW ||
1885 info->netcount)
1886 usc_set_sync_mode(info);
1887 else
1888 usc_set_async_mode(info);
1889
1890 usc_set_serial_signals(info);
1891
1892 info->dcd_chkcount = 0;
1893 info->cts_chkcount = 0;
1894 info->ri_chkcount = 0;
1895 info->dsr_chkcount = 0;
1896
1897 usc_EnableStatusIrqs(info,SICR_CTS+SICR_DSR+SICR_DCD+SICR_RI);
1898 usc_EnableInterrupts(info, IO_PIN);
1899 usc_get_serial_signals(info);
1900
1901 if (info->netcount || info->port.tty->termios->c_cflag & CREAD)
1902 usc_start_receiver(info);
1903
1904 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1905 }
1906
1907 /* Reconfigure adapter based on new parameters
1908 */
1909 static void mgsl_change_params(struct mgsl_struct *info)
1910 {
1911 unsigned cflag;
1912 int bits_per_char;
1913
1914 if (!info->port.tty || !info->port.tty->termios)
1915 return;
1916
1917 if (debug_level >= DEBUG_LEVEL_INFO)
1918 printk("%s(%d):mgsl_change_params(%s)\n",
1919 __FILE__,__LINE__, info->device_name );
1920
1921 cflag = info->port.tty->termios->c_cflag;
1922
1923 /* if B0 rate (hangup) specified then negate DTR and RTS */
1924 /* otherwise assert DTR and RTS */
1925 if (cflag & CBAUD)
1926 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
1927 else
1928 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
1929
1930 /* byte size and parity */
1931
1932 switch (cflag & CSIZE) {
1933 case CS5: info->params.data_bits = 5; break;
1934 case CS6: info->params.data_bits = 6; break;
1935 case CS7: info->params.data_bits = 7; break;
1936 case CS8: info->params.data_bits = 8; break;
1937 /* Never happens, but GCC is too dumb to figure it out */
1938 default: info->params.data_bits = 7; break;
1939 }
1940
1941 if (cflag & CSTOPB)
1942 info->params.stop_bits = 2;
1943 else
1944 info->params.stop_bits = 1;
1945
1946 info->params.parity = ASYNC_PARITY_NONE;
1947 if (cflag & PARENB) {
1948 if (cflag & PARODD)
1949 info->params.parity = ASYNC_PARITY_ODD;
1950 else
1951 info->params.parity = ASYNC_PARITY_EVEN;
1952 #ifdef CMSPAR
1953 if (cflag & CMSPAR)
1954 info->params.parity = ASYNC_PARITY_SPACE;
1955 #endif
1956 }
1957
1958 /* calculate number of jiffies to transmit a full
1959 * FIFO (32 bytes) at specified data rate
1960 */
1961 bits_per_char = info->params.data_bits +
1962 info->params.stop_bits + 1;
1963
1964 /* if port data rate is set to 460800 or less then
1965 * allow tty settings to override, otherwise keep the
1966 * current data rate.
1967 */
1968 if (info->params.data_rate <= 460800)
1969 info->params.data_rate = tty_get_baud_rate(info->port.tty);
1970
1971 if ( info->params.data_rate ) {
1972 info->timeout = (32*HZ*bits_per_char) /
1973 info->params.data_rate;
1974 }
1975 info->timeout += HZ/50; /* Add .02 seconds of slop */
1976
1977 if (cflag & CRTSCTS)
1978 info->port.flags |= ASYNC_CTS_FLOW;
1979 else
1980 info->port.flags &= ~ASYNC_CTS_FLOW;
1981
1982 if (cflag & CLOCAL)
1983 info->port.flags &= ~ASYNC_CHECK_CD;
1984 else
1985 info->port.flags |= ASYNC_CHECK_CD;
1986
1987 /* process tty input control flags */
1988
1989 info->read_status_mask = RXSTATUS_OVERRUN;
1990 if (I_INPCK(info->port.tty))
1991 info->read_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
1992 if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
1993 info->read_status_mask |= RXSTATUS_BREAK_RECEIVED;
1994
1995 if (I_IGNPAR(info->port.tty))
1996 info->ignore_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
1997 if (I_IGNBRK(info->port.tty)) {
1998 info->ignore_status_mask |= RXSTATUS_BREAK_RECEIVED;
1999 /* If ignoring parity and break indicators, ignore
2000 * overruns too. (For real raw support).
2001 */
2002 if (I_IGNPAR(info->port.tty))
2003 info->ignore_status_mask |= RXSTATUS_OVERRUN;
2004 }
2005
2006 mgsl_program_hw(info);
2007
2008 } /* end of mgsl_change_params() */
2009
2010 /* mgsl_put_char()
2011 *
2012 * Add a character to the transmit buffer.
2013 *
2014 * Arguments: tty pointer to tty information structure
2015 * ch character to add to transmit buffer
2016 *
2017 * Return Value: None
2018 */
2019 static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
2020 {
2021 struct mgsl_struct *info = tty->driver_data;
2022 unsigned long flags;
2023 int ret = 0;
2024
2025 if (debug_level >= DEBUG_LEVEL_INFO) {
2026 printk(KERN_DEBUG "%s(%d):mgsl_put_char(%d) on %s\n",
2027 __FILE__, __LINE__, ch, info->device_name);
2028 }
2029
2030 if (mgsl_paranoia_check(info, tty->name, "mgsl_put_char"))
2031 return 0;
2032
2033 if (!info->xmit_buf)
2034 return 0;
2035
2036 spin_lock_irqsave(&info->irq_spinlock, flags);
2037
2038 if ((info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active) {
2039 if (info->xmit_cnt < SERIAL_XMIT_SIZE - 1) {
2040 info->xmit_buf[info->xmit_head++] = ch;
2041 info->xmit_head &= SERIAL_XMIT_SIZE-1;
2042 info->xmit_cnt++;
2043 ret = 1;
2044 }
2045 }
2046 spin_unlock_irqrestore(&info->irq_spinlock, flags);
2047 return ret;
2048
2049 } /* end of mgsl_put_char() */
2050
2051 /* mgsl_flush_chars()
2052 *
2053 * Enable transmitter so remaining characters in the
2054 * transmit buffer are sent.
2055 *
2056 * Arguments: tty pointer to tty information structure
2057 * Return Value: None
2058 */
2059 static void mgsl_flush_chars(struct tty_struct *tty)
2060 {
2061 struct mgsl_struct *info = tty->driver_data;
2062 unsigned long flags;
2063
2064 if ( debug_level >= DEBUG_LEVEL_INFO )
2065 printk( "%s(%d):mgsl_flush_chars() entry on %s xmit_cnt=%d\n",
2066 __FILE__,__LINE__,info->device_name,info->xmit_cnt);
2067
2068 if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_chars"))
2069 return;
2070
2071 if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
2072 !info->xmit_buf)
2073 return;
2074
2075 if ( debug_level >= DEBUG_LEVEL_INFO )
2076 printk( "%s(%d):mgsl_flush_chars() entry on %s starting transmitter\n",
2077 __FILE__,__LINE__,info->device_name );
2078
2079 spin_lock_irqsave(&info->irq_spinlock,flags);
2080
2081 if (!info->tx_active) {
2082 if ( (info->params.mode == MGSL_MODE_HDLC ||
2083 info->params.mode == MGSL_MODE_RAW) && info->xmit_cnt ) {
2084 /* operating in synchronous (frame oriented) mode */
2085 /* copy data from circular xmit_buf to */
2086 /* transmit DMA buffer. */
2087 mgsl_load_tx_dma_buffer(info,
2088 info->xmit_buf,info->xmit_cnt);
2089 }
2090 usc_start_transmitter(info);
2091 }
2092
2093 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2094
2095 } /* end of mgsl_flush_chars() */
2096
2097 /* mgsl_write()
2098 *
2099 * Send a block of data
2100 *
2101 * Arguments:
2102 *
2103 * tty pointer to tty information structure
2104 * buf pointer to buffer containing send data
2105 * count size of send data in bytes
2106 *
2107 * Return Value: number of characters written
2108 */
2109 static int mgsl_write(struct tty_struct * tty,
2110 const unsigned char *buf, int count)
2111 {
2112 int c, ret = 0;
2113 struct mgsl_struct *info = tty->driver_data;
2114 unsigned long flags;
2115
2116 if ( debug_level >= DEBUG_LEVEL_INFO )
2117 printk( "%s(%d):mgsl_write(%s) count=%d\n",
2118 __FILE__,__LINE__,info->device_name,count);
2119
2120 if (mgsl_paranoia_check(info, tty->name, "mgsl_write"))
2121 goto cleanup;
2122
2123 if (!info->xmit_buf)
2124 goto cleanup;
2125
2126 if ( info->params.mode == MGSL_MODE_HDLC ||
2127 info->params.mode == MGSL_MODE_RAW ) {
2128 /* operating in synchronous (frame oriented) mode */
2129 /* operating in synchronous (frame oriented) mode */
2130 if (info->tx_active) {
2131
2132 if ( info->params.mode == MGSL_MODE_HDLC ) {
2133 ret = 0;
2134 goto cleanup;
2135 }
2136 /* transmitter is actively sending data -
2137 * if we have multiple transmit dma and
2138 * holding buffers, attempt to queue this
2139 * frame for transmission at a later time.
2140 */
2141 if (info->tx_holding_count >= info->num_tx_holding_buffers ) {
2142 /* no tx holding buffers available */
2143 ret = 0;
2144 goto cleanup;
2145 }
2146
2147 /* queue transmit frame request */
2148 ret = count;
2149 save_tx_buffer_request(info,buf,count);
2150
2151 /* if we have sufficient tx dma buffers,
2152 * load the next buffered tx request
2153 */
2154 spin_lock_irqsave(&info->irq_spinlock,flags);
2155 load_next_tx_holding_buffer(info);
2156 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2157 goto cleanup;
2158 }
2159
2160 /* if operating in HDLC LoopMode and the adapter */
2161 /* has yet to be inserted into the loop, we can't */
2162 /* transmit */
2163
2164 if ( (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) &&
2165 !usc_loopmode_active(info) )
2166 {
2167 ret = 0;
2168 goto cleanup;
2169 }
2170
2171 if ( info->xmit_cnt ) {
2172 /* Send accumulated from send_char() calls */
2173 /* as frame and wait before accepting more data. */
2174 ret = 0;
2175
2176 /* copy data from circular xmit_buf to */
2177 /* transmit DMA buffer. */
2178 mgsl_load_tx_dma_buffer(info,
2179 info->xmit_buf,info->xmit_cnt);
2180 if ( debug_level >= DEBUG_LEVEL_INFO )
2181 printk( "%s(%d):mgsl_write(%s) sync xmit_cnt flushing\n",
2182 __FILE__,__LINE__,info->device_name);
2183 } else {
2184 if ( debug_level >= DEBUG_LEVEL_INFO )
2185 printk( "%s(%d):mgsl_write(%s) sync transmit accepted\n",
2186 __FILE__,__LINE__,info->device_name);
2187 ret = count;
2188 info->xmit_cnt = count;
2189 mgsl_load_tx_dma_buffer(info,buf,count);
2190 }
2191 } else {
2192 while (1) {
2193 spin_lock_irqsave(&info->irq_spinlock,flags);
2194 c = min_t(int, count,
2195 min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
2196 SERIAL_XMIT_SIZE - info->xmit_head));
2197 if (c <= 0) {
2198 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2199 break;
2200 }
2201 memcpy(info->xmit_buf + info->xmit_head, buf, c);
2202 info->xmit_head = ((info->xmit_head + c) &
2203 (SERIAL_XMIT_SIZE-1));
2204 info->xmit_cnt += c;
2205 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2206 buf += c;
2207 count -= c;
2208 ret += c;
2209 }
2210 }
2211
2212 if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
2213 spin_lock_irqsave(&info->irq_spinlock,flags);
2214 if (!info->tx_active)
2215 usc_start_transmitter(info);
2216 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2217 }
2218 cleanup:
2219 if ( debug_level >= DEBUG_LEVEL_INFO )
2220 printk( "%s(%d):mgsl_write(%s) returning=%d\n",
2221 __FILE__,__LINE__,info->device_name,ret);
2222
2223 return ret;
2224
2225 } /* end of mgsl_write() */
2226
2227 /* mgsl_write_room()
2228 *
2229 * Return the count of free bytes in transmit buffer
2230 *
2231 * Arguments: tty pointer to tty info structure
2232 * Return Value: None
2233 */
2234 static int mgsl_write_room(struct tty_struct *tty)
2235 {
2236 struct mgsl_struct *info = tty->driver_data;
2237 int ret;
2238
2239 if (mgsl_paranoia_check(info, tty->name, "mgsl_write_room"))
2240 return 0;
2241 ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
2242 if (ret < 0)
2243 ret = 0;
2244
2245 if (debug_level >= DEBUG_LEVEL_INFO)
2246 printk("%s(%d):mgsl_write_room(%s)=%d\n",
2247 __FILE__,__LINE__, info->device_name,ret );
2248
2249 if ( info->params.mode == MGSL_MODE_HDLC ||
2250 info->params.mode == MGSL_MODE_RAW ) {
2251 /* operating in synchronous (frame oriented) mode */
2252 if ( info->tx_active )
2253 return 0;
2254 else
2255 return HDLC_MAX_FRAME_SIZE;
2256 }
2257
2258 return ret;
2259
2260 } /* end of mgsl_write_room() */
2261
2262 /* mgsl_chars_in_buffer()
2263 *
2264 * Return the count of bytes in transmit buffer
2265 *
2266 * Arguments: tty pointer to tty info structure
2267 * Return Value: None
2268 */
2269 static int mgsl_chars_in_buffer(struct tty_struct *tty)
2270 {
2271 struct mgsl_struct *info = tty->driver_data;
2272
2273 if (debug_level >= DEBUG_LEVEL_INFO)
2274 printk("%s(%d):mgsl_chars_in_buffer(%s)\n",
2275 __FILE__,__LINE__, info->device_name );
2276
2277 if (mgsl_paranoia_check(info, tty->name, "mgsl_chars_in_buffer"))
2278 return 0;
2279
2280 if (debug_level >= DEBUG_LEVEL_INFO)
2281 printk("%s(%d):mgsl_chars_in_buffer(%s)=%d\n",
2282 __FILE__,__LINE__, info->device_name,info->xmit_cnt );
2283
2284 if ( info->params.mode == MGSL_MODE_HDLC ||
2285 info->params.mode == MGSL_MODE_RAW ) {
2286 /* operating in synchronous (frame oriented) mode */
2287 if ( info->tx_active )
2288 return info->max_frame_size;
2289 else
2290 return 0;
2291 }
2292
2293 return info->xmit_cnt;
2294 } /* end of mgsl_chars_in_buffer() */
2295
2296 /* mgsl_flush_buffer()
2297 *
2298 * Discard all data in the send buffer
2299 *
2300 * Arguments: tty pointer to tty info structure
2301 * Return Value: None
2302 */
2303 static void mgsl_flush_buffer(struct tty_struct *tty)
2304 {
2305 struct mgsl_struct *info = tty->driver_data;
2306 unsigned long flags;
2307
2308 if (debug_level >= DEBUG_LEVEL_INFO)
2309 printk("%s(%d):mgsl_flush_buffer(%s) entry\n",
2310 __FILE__,__LINE__, info->device_name );
2311
2312 if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_buffer"))
2313 return;
2314
2315 spin_lock_irqsave(&info->irq_spinlock,flags);
2316 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
2317 del_timer(&info->tx_timer);
2318 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2319
2320 tty_wakeup(tty);
2321 }
2322
2323 /* mgsl_send_xchar()
2324 *
2325 * Send a high-priority XON/XOFF character
2326 *
2327 * Arguments: tty pointer to tty info structure
2328 * ch character to send
2329 * Return Value: None
2330 */
2331 static void mgsl_send_xchar(struct tty_struct *tty, char ch)
2332 {
2333 struct mgsl_struct *info = tty->driver_data;
2334 unsigned long flags;
2335
2336 if (debug_level >= DEBUG_LEVEL_INFO)
2337 printk("%s(%d):mgsl_send_xchar(%s,%d)\n",
2338 __FILE__,__LINE__, info->device_name, ch );
2339
2340 if (mgsl_paranoia_check(info, tty->name, "mgsl_send_xchar"))
2341 return;
2342
2343 info->x_char = ch;
2344 if (ch) {
2345 /* Make sure transmit interrupts are on */
2346 spin_lock_irqsave(&info->irq_spinlock,flags);
2347 if (!info->tx_enabled)
2348 usc_start_transmitter(info);
2349 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2350 }
2351 } /* end of mgsl_send_xchar() */
2352
2353 /* mgsl_throttle()
2354 *
2355 * Signal remote device to throttle send data (our receive data)
2356 *
2357 * Arguments: tty pointer to tty info structure
2358 * Return Value: None
2359 */
2360 static void mgsl_throttle(struct tty_struct * tty)
2361 {
2362 struct mgsl_struct *info = tty->driver_data;
2363 unsigned long flags;
2364
2365 if (debug_level >= DEBUG_LEVEL_INFO)
2366 printk("%s(%d):mgsl_throttle(%s) entry\n",
2367 __FILE__,__LINE__, info->device_name );
2368
2369 if (mgsl_paranoia_check(info, tty->name, "mgsl_throttle"))
2370 return;
2371
2372 if (I_IXOFF(tty))
2373 mgsl_send_xchar(tty, STOP_CHAR(tty));
2374
2375 if (tty->termios->c_cflag & CRTSCTS) {
2376 spin_lock_irqsave(&info->irq_spinlock,flags);
2377 info->serial_signals &= ~SerialSignal_RTS;
2378 usc_set_serial_signals(info);
2379 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2380 }
2381 } /* end of mgsl_throttle() */
2382
2383 /* mgsl_unthrottle()
2384 *
2385 * Signal remote device to stop throttling send data (our receive data)
2386 *
2387 * Arguments: tty pointer to tty info structure
2388 * Return Value: None
2389 */
2390 static void mgsl_unthrottle(struct tty_struct * tty)
2391 {
2392 struct mgsl_struct *info = tty->driver_data;
2393 unsigned long flags;
2394
2395 if (debug_level >= DEBUG_LEVEL_INFO)
2396 printk("%s(%d):mgsl_unthrottle(%s) entry\n",
2397 __FILE__,__LINE__, info->device_name );
2398
2399 if (mgsl_paranoia_check(info, tty->name, "mgsl_unthrottle"))
2400 return;
2401
2402 if (I_IXOFF(tty)) {
2403 if (info->x_char)
2404 info->x_char = 0;
2405 else
2406 mgsl_send_xchar(tty, START_CHAR(tty));
2407 }
2408
2409 if (tty->termios->c_cflag & CRTSCTS) {
2410 spin_lock_irqsave(&info->irq_spinlock,flags);
2411 info->serial_signals |= SerialSignal_RTS;
2412 usc_set_serial_signals(info);
2413 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2414 }
2415
2416 } /* end of mgsl_unthrottle() */
2417
2418 /* mgsl_get_stats()
2419 *
2420 * get the current serial parameters information
2421 *
2422 * Arguments: info pointer to device instance data
2423 * user_icount pointer to buffer to hold returned stats
2424 *
2425 * Return Value: 0 if success, otherwise error code
2426 */
2427 static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user *user_icount)
2428 {
2429 int err;
2430
2431 if (debug_level >= DEBUG_LEVEL_INFO)
2432 printk("%s(%d):mgsl_get_params(%s)\n",
2433 __FILE__,__LINE__, info->device_name);
2434
2435 if (!user_icount) {
2436 memset(&info->icount, 0, sizeof(info->icount));
2437 } else {
2438 mutex_lock(&info->port.mutex);
2439 COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
2440 mutex_unlock(&info->port.mutex);
2441 if (err)
2442 return -EFAULT;
2443 }
2444
2445 return 0;
2446
2447 } /* end of mgsl_get_stats() */
2448
2449 /* mgsl_get_params()
2450 *
2451 * get the current serial parameters information
2452 *
2453 * Arguments: info pointer to device instance data
2454 * user_params pointer to buffer to hold returned params
2455 *
2456 * Return Value: 0 if success, otherwise error code
2457 */
2458 static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params)
2459 {
2460 int err;
2461 if (debug_level >= DEBUG_LEVEL_INFO)
2462 printk("%s(%d):mgsl_get_params(%s)\n",
2463 __FILE__,__LINE__, info->device_name);
2464
2465 mutex_lock(&info->port.mutex);
2466 COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
2467 mutex_unlock(&info->port.mutex);
2468 if (err) {
2469 if ( debug_level >= DEBUG_LEVEL_INFO )
2470 printk( "%s(%d):mgsl_get_params(%s) user buffer copy failed\n",
2471 __FILE__,__LINE__,info->device_name);
2472 return -EFAULT;
2473 }
2474
2475 return 0;
2476
2477 } /* end of mgsl_get_params() */
2478
2479 /* mgsl_set_params()
2480 *
2481 * set the serial parameters
2482 *
2483 * Arguments:
2484 *
2485 * info pointer to device instance data
2486 * new_params user buffer containing new serial params
2487 *
2488 * Return Value: 0 if success, otherwise error code
2489 */
2490 static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params)
2491 {
2492 unsigned long flags;
2493 MGSL_PARAMS tmp_params;
2494 int err;
2495
2496 if (debug_level >= DEBUG_LEVEL_INFO)
2497 printk("%s(%d):mgsl_set_params %s\n", __FILE__,__LINE__,
2498 info->device_name );
2499 COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
2500 if (err) {
2501 if ( debug_level >= DEBUG_LEVEL_INFO )
2502 printk( "%s(%d):mgsl_set_params(%s) user buffer copy failed\n",
2503 __FILE__,__LINE__,info->device_name);
2504 return -EFAULT;
2505 }
2506
2507 mutex_lock(&info->port.mutex);
2508 spin_lock_irqsave(&info->irq_spinlock,flags);
2509 memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
2510 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2511
2512 mgsl_change_params(info);
2513 mutex_unlock(&info->port.mutex);
2514
2515 return 0;
2516
2517 } /* end of mgsl_set_params() */
2518
2519 /* mgsl_get_txidle()
2520 *
2521 * get the current transmit idle mode
2522 *
2523 * Arguments: info pointer to device instance data
2524 * idle_mode pointer to buffer to hold returned idle mode
2525 *
2526 * Return Value: 0 if success, otherwise error code
2527 */
2528 static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode)
2529 {
2530 int err;
2531
2532 if (debug_level >= DEBUG_LEVEL_INFO)
2533 printk("%s(%d):mgsl_get_txidle(%s)=%d\n",
2534 __FILE__,__LINE__, info->device_name, info->idle_mode);
2535
2536 COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
2537 if (err) {
2538 if ( debug_level >= DEBUG_LEVEL_INFO )
2539 printk( "%s(%d):mgsl_get_txidle(%s) user buffer copy failed\n",
2540 __FILE__,__LINE__,info->device_name);
2541 return -EFAULT;
2542 }
2543
2544 return 0;
2545
2546 } /* end of mgsl_get_txidle() */
2547
2548 /* mgsl_set_txidle() service ioctl to set transmit idle mode
2549 *
2550 * Arguments: info pointer to device instance data
2551 * idle_mode new idle mode
2552 *
2553 * Return Value: 0 if success, otherwise error code
2554 */
2555 static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode)
2556 {
2557 unsigned long flags;
2558
2559 if (debug_level >= DEBUG_LEVEL_INFO)
2560 printk("%s(%d):mgsl_set_txidle(%s,%d)\n", __FILE__,__LINE__,
2561 info->device_name, idle_mode );
2562
2563 spin_lock_irqsave(&info->irq_spinlock,flags);
2564 info->idle_mode = idle_mode;
2565 usc_set_txidle( info );
2566 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2567 return 0;
2568
2569 } /* end of mgsl_set_txidle() */
2570
2571 /* mgsl_txenable()
2572 *
2573 * enable or disable the transmitter
2574 *
2575 * Arguments:
2576 *
2577 * info pointer to device instance data
2578 * enable 1 = enable, 0 = disable
2579 *
2580 * Return Value: 0 if success, otherwise error code
2581 */
2582 static int mgsl_txenable(struct mgsl_struct * info, int enable)
2583 {
2584 unsigned long flags;
2585
2586 if (debug_level >= DEBUG_LEVEL_INFO)
2587 printk("%s(%d):mgsl_txenable(%s,%d)\n", __FILE__,__LINE__,
2588 info->device_name, enable);
2589
2590 spin_lock_irqsave(&info->irq_spinlock,flags);
2591 if ( enable ) {
2592 if ( !info->tx_enabled ) {
2593
2594 usc_start_transmitter(info);
2595 /*--------------------------------------------------
2596 * if HDLC/SDLC Loop mode, attempt to insert the
2597 * station in the 'loop' by setting CMR:13. Upon
2598 * receipt of the next GoAhead (RxAbort) sequence,
2599 * the OnLoop indicator (CCSR:7) should go active
2600 * to indicate that we are on the loop
2601 *--------------------------------------------------*/
2602 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
2603 usc_loopmode_insert_request( info );
2604 }
2605 } else {
2606 if ( info->tx_enabled )
2607 usc_stop_transmitter(info);
2608 }
2609 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2610 return 0;
2611
2612 } /* end of mgsl_txenable() */
2613
2614 /* mgsl_txabort() abort send HDLC frame
2615 *
2616 * Arguments: info pointer to device instance data
2617 * Return Value: 0 if success, otherwise error code
2618 */
2619 static int mgsl_txabort(struct mgsl_struct * info)
2620 {
2621 unsigned long flags;
2622
2623 if (debug_level >= DEBUG_LEVEL_INFO)
2624 printk("%s(%d):mgsl_txabort(%s)\n", __FILE__,__LINE__,
2625 info->device_name);
2626
2627 spin_lock_irqsave(&info->irq_spinlock,flags);
2628 if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC )
2629 {
2630 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
2631 usc_loopmode_cancel_transmit( info );
2632 else
2633 usc_TCmd(info,TCmd_SendAbort);
2634 }
2635 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2636 return 0;
2637
2638 } /* end of mgsl_txabort() */
2639
2640 /* mgsl_rxenable() enable or disable the receiver
2641 *
2642 * Arguments: info pointer to device instance data
2643 * enable 1 = enable, 0 = disable
2644 * Return Value: 0 if success, otherwise error code
2645 */
2646 static int mgsl_rxenable(struct mgsl_struct * info, int enable)
2647 {
2648 unsigned long flags;
2649
2650 if (debug_level >= DEBUG_LEVEL_INFO)
2651 printk("%s(%d):mgsl_rxenable(%s,%d)\n", __FILE__,__LINE__,
2652 info->device_name, enable);
2653
2654 spin_lock_irqsave(&info->irq_spinlock,flags);
2655 if ( enable ) {
2656 if ( !info->rx_enabled )
2657 usc_start_receiver(info);
2658 } else {
2659 if ( info->rx_enabled )
2660 usc_stop_receiver(info);
2661 }
2662 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2663 return 0;
2664
2665 } /* end of mgsl_rxenable() */
2666
2667 /* mgsl_wait_event() wait for specified event to occur
2668 *
2669 * Arguments: info pointer to device instance data
2670 * mask pointer to bitmask of events to wait for
2671 * Return Value: 0 if successful and bit mask updated with
2672 * of events triggerred,
2673 * otherwise error code
2674 */
2675 static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr)
2676 {
2677 unsigned long flags;
2678 int s;
2679 int rc=0;
2680 struct mgsl_icount cprev, cnow;
2681 int events;
2682 int mask;
2683 struct _input_signal_events oldsigs, newsigs;
2684 DECLARE_WAITQUEUE(wait, current);
2685
2686 COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
2687 if (rc) {
2688 return -EFAULT;
2689 }
2690
2691 if (debug_level >= DEBUG_LEVEL_INFO)
2692 printk("%s(%d):mgsl_wait_event(%s,%d)\n", __FILE__,__LINE__,
2693 info->device_name, mask);
2694
2695 spin_lock_irqsave(&info->irq_spinlock,flags);
2696
2697 /* return immediately if state matches requested events */
2698 usc_get_serial_signals(info);
2699 s = info->serial_signals;
2700 events = mask &
2701 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
2702 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
2703 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
2704 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
2705 if (events) {
2706 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2707 goto exit;
2708 }
2709
2710 /* save current irq counts */
2711 cprev = info->icount;
2712 oldsigs = info->input_signal_events;
2713
2714 /* enable hunt and idle irqs if needed */
2715 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
2716 u16 oldreg = usc_InReg(info,RICR);
2717 u16 newreg = oldreg +
2718 (mask & MgslEvent_ExitHuntMode ? RXSTATUS_EXITED_HUNT:0) +
2719 (mask & MgslEvent_IdleReceived ? RXSTATUS_IDLE_RECEIVED:0);
2720 if (oldreg != newreg)
2721 usc_OutReg(info, RICR, newreg);
2722 }
2723
2724 set_current_state(TASK_INTERRUPTIBLE);
2725 add_wait_queue(&info->event_wait_q, &wait);
2726
2727 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2728
2729
2730 for(;;) {
2731 schedule();
2732 if (signal_pending(current)) {
2733 rc = -ERESTARTSYS;
2734 break;
2735 }
2736
2737 /* get current irq counts */
2738 spin_lock_irqsave(&info->irq_spinlock,flags);
2739 cnow = info->icount;
2740 newsigs = info->input_signal_events;
2741 set_current_state(TASK_INTERRUPTIBLE);
2742 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2743
2744 /* if no change, wait aborted for some reason */
2745 if (newsigs.dsr_up == oldsigs.dsr_up &&
2746 newsigs.dsr_down == oldsigs.dsr_down &&
2747 newsigs.dcd_up == oldsigs.dcd_up &&
2748 newsigs.dcd_down == oldsigs.dcd_down &&
2749 newsigs.cts_up == oldsigs.cts_up &&
2750 newsigs.cts_down == oldsigs.cts_down &&
2751 newsigs.ri_up == oldsigs.ri_up &&
2752 newsigs.ri_down == oldsigs.ri_down &&
2753 cnow.exithunt == cprev.exithunt &&
2754 cnow.rxidle == cprev.rxidle) {
2755 rc = -EIO;
2756 break;
2757 }
2758
2759 events = mask &
2760 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
2761 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
2762 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
2763 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
2764 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
2765 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
2766 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
2767 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
2768 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
2769 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
2770 if (events)
2771 break;
2772
2773 cprev = cnow;
2774 oldsigs = newsigs;
2775 }
2776
2777 remove_wait_queue(&info->event_wait_q, &wait);
2778 set_current_state(TASK_RUNNING);
2779
2780 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
2781 spin_lock_irqsave(&info->irq_spinlock,flags);
2782 if (!waitqueue_active(&info->event_wait_q)) {
2783 /* disable enable exit hunt mode/idle rcvd IRQs */
2784 usc_OutReg(info, RICR, usc_InReg(info,RICR) &
2785 ~(RXSTATUS_EXITED_HUNT + RXSTATUS_IDLE_RECEIVED));
2786 }
2787 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2788 }
2789 exit:
2790 if ( rc == 0 )
2791 PUT_USER(rc, events, mask_ptr);
2792
2793 return rc;
2794
2795 } /* end of mgsl_wait_event() */
2796
2797 static int modem_input_wait(struct mgsl_struct *info,int arg)
2798 {
2799 unsigned long flags;
2800 int rc;
2801 struct mgsl_icount cprev, cnow;
2802 DECLARE_WAITQUEUE(wait, current);
2803
2804 /* save current irq counts */
2805 spin_lock_irqsave(&info->irq_spinlock,flags);
2806 cprev = info->icount;
2807 add_wait_queue(&info->status_event_wait_q, &wait);
2808 set_current_state(TASK_INTERRUPTIBLE);
2809 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2810
2811 for(;;) {
2812 schedule();
2813 if (signal_pending(current)) {
2814 rc = -ERESTARTSYS;
2815 break;
2816 }
2817
2818 /* get new irq counts */
2819 spin_lock_irqsave(&info->irq_spinlock,flags);
2820 cnow = info->icount;
2821 set_current_state(TASK_INTERRUPTIBLE);
2822 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2823
2824 /* if no change, wait aborted for some reason */
2825 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
2826 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
2827 rc = -EIO;
2828 break;
2829 }
2830
2831 /* check for change in caller specified modem input */
2832 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
2833 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
2834 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
2835 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
2836 rc = 0;
2837 break;
2838 }
2839
2840 cprev = cnow;
2841 }
2842 remove_wait_queue(&info->status_event_wait_q, &wait);
2843 set_current_state(TASK_RUNNING);
2844 return rc;
2845 }
2846
2847 /* return the state of the serial control and status signals
2848 */
2849 static int tiocmget(struct tty_struct *tty, struct file *file)
2850 {
2851 struct mgsl_struct *info = tty->driver_data;
2852 unsigned int result;
2853 unsigned long flags;
2854
2855 spin_lock_irqsave(&info->irq_spinlock,flags);
2856 usc_get_serial_signals(info);
2857 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2858
2859 result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
2860 ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
2861 ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
2862 ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) +
2863 ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
2864 ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
2865
2866 if (debug_level >= DEBUG_LEVEL_INFO)
2867 printk("%s(%d):%s tiocmget() value=%08X\n",
2868 __FILE__,__LINE__, info->device_name, result );
2869 return result;
2870 }
2871
2872 /* set modem control signals (DTR/RTS)
2873 */
2874 static int tiocmset(struct tty_struct *tty, struct file *file,
2875 unsigned int set, unsigned int clear)
2876 {
2877 struct mgsl_struct *info = tty->driver_data;
2878 unsigned long flags;
2879
2880 if (debug_level >= DEBUG_LEVEL_INFO)
2881 printk("%s(%d):%s tiocmset(%x,%x)\n",
2882 __FILE__,__LINE__,info->device_name, set, clear);
2883
2884 if (set & TIOCM_RTS)
2885 info->serial_signals |= SerialSignal_RTS;
2886 if (set & TIOCM_DTR)
2887 info->serial_signals |= SerialSignal_DTR;
2888 if (clear & TIOCM_RTS)
2889 info->serial_signals &= ~SerialSignal_RTS;
2890 if (clear & TIOCM_DTR)
2891 info->serial_signals &= ~SerialSignal_DTR;
2892
2893 spin_lock_irqsave(&info->irq_spinlock,flags);
2894 usc_set_serial_signals(info);
2895 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2896
2897 return 0;
2898 }
2899
2900 /* mgsl_break() Set or clear transmit break condition
2901 *
2902 * Arguments: tty pointer to tty instance data
2903 * break_state -1=set break condition, 0=clear
2904 * Return Value: error code
2905 */
2906 static int mgsl_break(struct tty_struct *tty, int break_state)
2907 {
2908 struct mgsl_struct * info = tty->driver_data;
2909 unsigned long flags;
2910
2911 if (debug_level >= DEBUG_LEVEL_INFO)
2912 printk("%s(%d):mgsl_break(%s,%d)\n",
2913 __FILE__,__LINE__, info->device_name, break_state);
2914
2915 if (mgsl_paranoia_check(info, tty->name, "mgsl_break"))
2916 return -EINVAL;
2917
2918 spin_lock_irqsave(&info->irq_spinlock,flags);
2919 if (break_state == -1)
2920 usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) | BIT7));
2921 else
2922 usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) & ~BIT7));
2923 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2924 return 0;
2925
2926 } /* end of mgsl_break() */
2927
2928 /* mgsl_ioctl() Service an IOCTL request
2929 *
2930 * Arguments:
2931 *
2932 * tty pointer to tty instance data
2933 * file pointer to associated file object for device
2934 * cmd IOCTL command code
2935 * arg command argument/context
2936 *
2937 * Return Value: 0 if success, otherwise error code
2938 */
2939 static int mgsl_ioctl(struct tty_struct *tty, struct file * file,
2940 unsigned int cmd, unsigned long arg)
2941 {
2942 struct mgsl_struct * info = tty->driver_data;
2943
2944 if (debug_level >= DEBUG_LEVEL_INFO)
2945 printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
2946 info->device_name, cmd );
2947
2948 if (mgsl_paranoia_check(info, tty->name, "mgsl_ioctl"))
2949 return -ENODEV;
2950
2951 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
2952 (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
2953 if (tty->flags & (1 << TTY_IO_ERROR))
2954 return -EIO;
2955 }
2956
2957 return mgsl_ioctl_common(info, cmd, arg);
2958 }
2959
2960 static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg)
2961 {
2962 int error;
2963 struct mgsl_icount cnow; /* kernel counter temps */
2964 void __user *argp = (void __user *)arg;
2965 struct serial_icounter_struct __user *p_cuser; /* user space */
2966 unsigned long flags;
2967
2968 switch (cmd) {
2969 case MGSL_IOCGPARAMS:
2970 return mgsl_get_params(info, argp);
2971 case MGSL_IOCSPARAMS:
2972 return mgsl_set_params(info, argp);
2973 case MGSL_IOCGTXIDLE:
2974 return mgsl_get_txidle(info, argp);
2975 case MGSL_IOCSTXIDLE:
2976 return mgsl_set_txidle(info,(int)arg);
2977 case MGSL_IOCTXENABLE:
2978 return mgsl_txenable(info,(int)arg);
2979 case MGSL_IOCRXENABLE:
2980 return mgsl_rxenable(info,(int)arg);
2981 case MGSL_IOCTXABORT:
2982 return mgsl_txabort(info);
2983 case MGSL_IOCGSTATS:
2984 return mgsl_get_stats(info, argp);
2985 case MGSL_IOCWAITEVENT:
2986 return mgsl_wait_event(info, argp);
2987 case MGSL_IOCLOOPTXDONE:
2988 return mgsl_loopmode_send_done(info);
2989 /* Wait for modem input (DCD,RI,DSR,CTS) change
2990 * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
2991 */
2992 case TIOCMIWAIT:
2993 return modem_input_wait(info,(int)arg);
2994
2995 /*
2996 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
2997 * Return: write counters to the user passed counter struct
2998 * NB: both 1->0 and 0->1 transitions are counted except for
2999 * RI where only 0->1 is counted.
3000 */
3001 case TIOCGICOUNT:
3002 spin_lock_irqsave(&info->irq_spinlock,flags);
3003 cnow = info->icount;
3004 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3005 p_cuser = argp;
3006 PUT_USER(error,cnow.cts, &p_cuser->cts);
3007 if (error) return error;
3008 PUT_USER(error,cnow.dsr, &p_cuser->dsr);
3009 if (error) return error;
3010 PUT_USER(error,cnow.rng, &p_cuser->rng);
3011 if (error) return error;
3012 PUT_USER(error,cnow.dcd, &p_cuser->dcd);
3013 if (error) return error;
3014 PUT_USER(error,cnow.rx, &p_cuser->rx);
3015 if (error) return error;
3016 PUT_USER(error,cnow.tx, &p_cuser->tx);
3017 if (error) return error;
3018 PUT_USER(error,cnow.frame, &p_cuser->frame);
3019 if (error) return error;
3020 PUT_USER(error,cnow.overrun, &p_cuser->overrun);
3021 if (error) return error;
3022 PUT_USER(error,cnow.parity, &p_cuser->parity);
3023 if (error) return error;
3024 PUT_USER(error,cnow.brk, &p_cuser->brk);
3025 if (error) return error;
3026 PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
3027 if (error) return error;
3028 return 0;
3029 default:
3030 return -ENOIOCTLCMD;
3031 }
3032 return 0;
3033 }
3034
3035 /* mgsl_set_termios()
3036 *
3037 * Set new termios settings
3038 *
3039 * Arguments:
3040 *
3041 * tty pointer to tty structure
3042 * termios pointer to buffer to hold returned old termios
3043 *
3044 * Return Value: None
3045 */
3046 static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
3047 {
3048 struct mgsl_struct *info = tty->driver_data;
3049 unsigned long flags;
3050
3051 if (debug_level >= DEBUG_LEVEL_INFO)
3052 printk("%s(%d):mgsl_set_termios %s\n", __FILE__,__LINE__,
3053 tty->driver->name );
3054
3055 mgsl_change_params(info);
3056
3057 /* Handle transition to B0 status */
3058 if (old_termios->c_cflag & CBAUD &&
3059 !(tty->termios->c_cflag & CBAUD)) {
3060 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
3061 spin_lock_irqsave(&info->irq_spinlock,flags);
3062 usc_set_serial_signals(info);
3063 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3064 }
3065
3066 /* Handle transition away from B0 status */
3067 if (!(old_termios->c_cflag & CBAUD) &&
3068 tty->termios->c_cflag & CBAUD) {
3069 info->serial_signals |= SerialSignal_DTR;
3070 if (!(tty->termios->c_cflag & CRTSCTS) ||
3071 !test_bit(TTY_THROTTLED, &tty->flags)) {
3072 info->serial_signals |= SerialSignal_RTS;
3073 }
3074 spin_lock_irqsave(&info->irq_spinlock,flags);
3075 usc_set_serial_signals(info);
3076 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3077 }
3078
3079 /* Handle turning off CRTSCTS */
3080 if (old_termios->c_cflag & CRTSCTS &&
3081 !(tty->termios->c_cflag & CRTSCTS)) {
3082 tty->hw_stopped = 0;
3083 mgsl_start(tty);
3084 }
3085
3086 } /* end of mgsl_set_termios() */
3087
3088 /* mgsl_close()
3089 *
3090 * Called when port is closed. Wait for remaining data to be
3091 * sent. Disable port and free resources.
3092 *
3093 * Arguments:
3094 *
3095 * tty pointer to open tty structure
3096 * filp pointer to open file object
3097 *
3098 * Return Value: None
3099 */
3100 static void mgsl_close(struct tty_struct *tty, struct file * filp)
3101 {
3102 struct mgsl_struct * info = tty->driver_data;
3103
3104 if (mgsl_paranoia_check(info, tty->name, "mgsl_close"))
3105 return;
3106
3107 if (debug_level >= DEBUG_LEVEL_INFO)
3108 printk("%s(%d):mgsl_close(%s) entry, count=%d\n",
3109 __FILE__,__LINE__, info->device_name, info->port.count);
3110
3111 if (tty_port_close_start(&info->port, tty, filp) == 0)
3112 goto cleanup;
3113
3114 mutex_lock(&info->port.mutex);
3115 if (info->port.flags & ASYNC_INITIALIZED)
3116 mgsl_wait_until_sent(tty, info->timeout);
3117 mgsl_flush_buffer(tty);
3118 tty_ldisc_flush(tty);
3119 shutdown(info);
3120 mutex_unlock(&info->port.mutex);
3121
3122 tty_port_close_end(&info->port, tty);
3123 info->port.tty = NULL;
3124 cleanup:
3125 if (debug_level >= DEBUG_LEVEL_INFO)
3126 printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__,
3127 tty->driver->name, info->port.count);
3128
3129 } /* end of mgsl_close() */
3130
3131 /* mgsl_wait_until_sent()
3132 *
3133 * Wait until the transmitter is empty.
3134 *
3135 * Arguments:
3136 *
3137 * tty pointer to tty info structure
3138 * timeout time to wait for send completion
3139 *
3140 * Return Value: None
3141 */
3142 static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
3143 {
3144 struct mgsl_struct * info = tty->driver_data;
3145 unsigned long orig_jiffies, char_time;
3146
3147 if (!info )
3148 return;
3149
3150 if (debug_level >= DEBUG_LEVEL_INFO)
3151 printk("%s(%d):mgsl_wait_until_sent(%s) entry\n",
3152 __FILE__,__LINE__, info->device_name );
3153
3154 if (mgsl_paranoia_check(info, tty->name, "mgsl_wait_until_sent"))
3155 return;
3156
3157 if (!(info->port.flags & ASYNC_INITIALIZED))
3158 goto exit;
3159
3160 orig_jiffies = jiffies;
3161
3162 /* Set check interval to 1/5 of estimated time to
3163 * send a character, and make it at least 1. The check
3164 * interval should also be less than the timeout.
3165 * Note: use tight timings here to satisfy the NIST-PCTS.
3166 */
3167
3168 if ( info->params.data_rate ) {
3169 char_time = info->timeout/(32 * 5);
3170 if (!char_time)
3171 char_time++;
3172 } else
3173 char_time = 1;
3174
3175 if (timeout)
3176 char_time = min_t(unsigned long, char_time, timeout);
3177
3178 if ( info->params.mode == MGSL_MODE_HDLC ||
3179 info->params.mode == MGSL_MODE_RAW ) {
3180 while (info->tx_active) {
3181 msleep_interruptible(jiffies_to_msecs(char_time));
3182 if (signal_pending(current))
3183 break;
3184 if (timeout && time_after(jiffies, orig_jiffies + timeout))
3185 break;
3186 }
3187 } else {
3188 while (!(usc_InReg(info,TCSR) & TXSTATUS_ALL_SENT) &&
3189 info->tx_enabled) {
3190 msleep_interruptible(jiffies_to_msecs(char_time));
3191 if (signal_pending(current))
3192 break;
3193 if (timeout && time_after(jiffies, orig_jiffies + timeout))
3194 break;
3195 }
3196 }
3197
3198 exit:
3199 if (debug_level >= DEBUG_LEVEL_INFO)
3200 printk("%s(%d):mgsl_wait_until_sent(%s) exit\n",
3201 __FILE__,__LINE__, info->device_name );
3202
3203 } /* end of mgsl_wait_until_sent() */
3204
3205 /* mgsl_hangup()
3206 *
3207 * Called by tty_hangup() when a hangup is signaled.
3208 * This is the same as to closing all open files for the port.
3209 *
3210 * Arguments: tty pointer to associated tty object
3211 * Return Value: None
3212 */
3213 static void mgsl_hangup(struct tty_struct *tty)
3214 {
3215 struct mgsl_struct * info = tty->driver_data;
3216
3217 if (debug_level >= DEBUG_LEVEL_INFO)
3218 printk("%s(%d):mgsl_hangup(%s)\n",
3219 __FILE__,__LINE__, info->device_name );
3220
3221 if (mgsl_paranoia_check(info, tty->name, "mgsl_hangup"))
3222 return;
3223
3224 mgsl_flush_buffer(tty);
3225 shutdown(info);
3226
3227 info->port.count = 0;
3228 info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
3229 info->port.tty = NULL;
3230
3231 wake_up_interruptible(&info->port.open_wait);
3232
3233 } /* end of mgsl_hangup() */
3234
3235 /*
3236 * carrier_raised()
3237 *
3238 * Return true if carrier is raised
3239 */
3240
3241 static int carrier_raised(struct tty_port *port)
3242 {
3243 unsigned long flags;
3244 struct mgsl_struct *info = container_of(port, struct mgsl_struct, port);
3245
3246 spin_lock_irqsave(&info->irq_spinlock, flags);
3247 usc_get_serial_signals(info);
3248 spin_unlock_irqrestore(&info->irq_spinlock, flags);
3249 return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
3250 }
3251
3252 static void dtr_rts(struct tty_port *port, int on)
3253 {
3254 struct mgsl_struct *info = container_of(port, struct mgsl_struct, port);
3255 unsigned long flags;
3256
3257 spin_lock_irqsave(&info->irq_spinlock,flags);
3258 if (on)
3259 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
3260 else
3261 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
3262 usc_set_serial_signals(info);
3263 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3264 }
3265
3266
3267 /* block_til_ready()
3268 *
3269 * Block the current process until the specified port
3270 * is ready to be opened.
3271 *
3272 * Arguments:
3273 *
3274 * tty pointer to tty info structure
3275 * filp pointer to open file object
3276 * info pointer to device instance data
3277 *
3278 * Return Value: 0 if success, otherwise error code
3279 */
3280 static int block_til_ready(struct tty_struct *tty, struct file * filp,
3281 struct mgsl_struct *info)
3282 {
3283 DECLARE_WAITQUEUE(wait, current);
3284 int retval;
3285 bool do_clocal = false;
3286 bool extra_count = false;
3287 unsigned long flags;
3288 int dcd;
3289 struct tty_port *port = &info->port;
3290
3291 if (debug_level >= DEBUG_LEVEL_INFO)
3292 printk("%s(%d):block_til_ready on %s\n",
3293 __FILE__,__LINE__, tty->driver->name );
3294
3295 if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3296 /* nonblock mode is set or port is not enabled */
3297 port->flags |= ASYNC_NORMAL_ACTIVE;
3298 return 0;
3299 }
3300
3301 if (tty->termios->c_cflag & CLOCAL)
3302 do_clocal = true;
3303
3304 /* Wait for carrier detect and the line to become
3305 * free (i.e., not in use by the callout). While we are in
3306 * this loop, port->count is dropped by one, so that
3307 * mgsl_close() knows when to free things. We restore it upon
3308 * exit, either normal or abnormal.
3309 */
3310
3311 retval = 0;
3312 add_wait_queue(&port->open_wait, &wait);
3313
3314 if (debug_level >= DEBUG_LEVEL_INFO)
3315 printk("%s(%d):block_til_ready before block on %s count=%d\n",
3316 __FILE__,__LINE__, tty->driver->name, port->count );
3317
3318 spin_lock_irqsave(&info->irq_spinlock, flags);
3319 if (!tty_hung_up_p(filp)) {
3320 extra_count = true;
3321 port->count--;
3322 }
3323 spin_unlock_irqrestore(&info->irq_spinlock, flags);
3324 port->blocked_open++;
3325
3326 while (1) {
3327 if (tty->termios->c_cflag & CBAUD)
3328 tty_port_raise_dtr_rts(port);
3329
3330 set_current_state(TASK_INTERRUPTIBLE);
3331
3332 if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){
3333 retval = (port->flags & ASYNC_HUP_NOTIFY) ?
3334 -EAGAIN : -ERESTARTSYS;
3335 break;
3336 }
3337
3338 dcd = tty_port_carrier_raised(&info->port);
3339
3340 if (!(port->flags & ASYNC_CLOSING) && (do_clocal || dcd))
3341 break;
3342
3343 if (signal_pending(current)) {
3344 retval = -ERESTARTSYS;
3345 break;
3346 }
3347
3348 if (debug_level >= DEBUG_LEVEL_INFO)
3349 printk("%s(%d):block_til_ready blocking on %s count=%d\n",
3350 __FILE__,__LINE__, tty->driver->name, port->count );
3351
3352 tty_unlock();
3353 schedule();
3354 tty_lock();
3355 }
3356
3357 set_current_state(TASK_RUNNING);
3358 remove_wait_queue(&port->open_wait, &wait);
3359
3360 /* FIXME: Racy on hangup during close wait */
3361 if (extra_count)
3362 port->count++;
3363 port->blocked_open--;
3364
3365 if (debug_level >= DEBUG_LEVEL_INFO)
3366 printk("%s(%d):block_til_ready after blocking on %s count=%d\n",
3367 __FILE__,__LINE__, tty->driver->name, port->count );
3368
3369 if (!retval)
3370 port->flags |= ASYNC_NORMAL_ACTIVE;
3371
3372 return retval;
3373
3374 } /* end of block_til_ready() */
3375
3376 /* mgsl_open()
3377 *
3378 * Called when a port is opened. Init and enable port.
3379 * Perform serial-specific initialization for the tty structure.
3380 *
3381 * Arguments: tty pointer to tty info structure
3382 * filp associated file pointer
3383 *
3384 * Return Value: 0 if success, otherwise error code
3385 */
3386 static int mgsl_open(struct tty_struct *tty, struct file * filp)
3387 {
3388 struct mgsl_struct *info;
3389 int retval, line;
3390 unsigned long flags;
3391
3392 /* verify range of specified line number */
3393 line = tty->index;
3394 if ((line < 0) || (line >= mgsl_device_count)) {
3395 printk("%s(%d):mgsl_open with invalid line #%d.\n",
3396 __FILE__,__LINE__,line);
3397 return -ENODEV;
3398 }
3399
3400 /* find the info structure for the specified line */
3401 info = mgsl_device_list;
3402 while(info && info->line != line)
3403 info = info->next_device;
3404 if (mgsl_paranoia_check(info, tty->name, "mgsl_open"))
3405 return -ENODEV;
3406
3407 tty->driver_data = info;
3408 info->port.tty = tty;
3409
3410 if (debug_level >= DEBUG_LEVEL_INFO)
3411 printk("%s(%d):mgsl_open(%s), old ref count = %d\n",
3412 __FILE__,__LINE__,tty->driver->name, info->port.count);
3413
3414 /* If port is closing, signal caller to try again */
3415 if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
3416 if (info->port.flags & ASYNC_CLOSING)
3417 interruptible_sleep_on(&info->port.close_wait);
3418 retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
3419 -EAGAIN : -ERESTARTSYS);
3420 goto cleanup;
3421 }
3422
3423 info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
3424
3425 spin_lock_irqsave(&info->netlock, flags);
3426 if (info->netcount) {
3427 retval = -EBUSY;
3428 spin_unlock_irqrestore(&info->netlock, flags);
3429 goto cleanup;
3430 }
3431 info->port.count++;
3432 spin_unlock_irqrestore(&info->netlock, flags);
3433
3434 if (info->port.count == 1) {
3435 /* 1st open on this device, init hardware */
3436 retval = startup(info);
3437 if (retval < 0)
3438 goto cleanup;
3439 }
3440
3441 retval = block_til_ready(tty, filp, info);
3442 if (retval) {
3443 if (debug_level >= DEBUG_LEVEL_INFO)
3444 printk("%s(%d):block_til_ready(%s) returned %d\n",
3445 __FILE__,__LINE__, info->device_name, retval);
3446 goto cleanup;
3447 }
3448
3449 if (debug_level >= DEBUG_LEVEL_INFO)
3450 printk("%s(%d):mgsl_open(%s) success\n",
3451 __FILE__,__LINE__, info->device_name);
3452 retval = 0;
3453
3454 cleanup:
3455 if (retval) {
3456 if (tty->count == 1)
3457 info->port.tty = NULL; /* tty layer will release tty struct */
3458 if(info->port.count)
3459 info->port.count--;
3460 }
3461
3462 return retval;
3463
3464 } /* end of mgsl_open() */
3465
3466 /*
3467 * /proc fs routines....
3468 */
3469
3470 static inline void line_info(struct seq_file *m, struct mgsl_struct *info)
3471 {
3472 char stat_buf[30];
3473 unsigned long flags;
3474
3475 if (info->bus_type == MGSL_BUS_TYPE_PCI) {
3476 seq_printf(m, "%s:PCI io:%04X irq:%d mem:%08X lcr:%08X",
3477 info->device_name, info->io_base, info->irq_level,
3478 info->phys_memory_base, info->phys_lcr_base);
3479 } else {
3480 seq_printf(m, "%s:(E)ISA io:%04X irq:%d dma:%d",
3481 info->device_name, info->io_base,
3482 info->irq_level, info->dma_level);
3483 }
3484
3485 /* output current serial signal states */
3486 spin_lock_irqsave(&info->irq_spinlock,flags);
3487 usc_get_serial_signals(info);
3488 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3489
3490 stat_buf[0] = 0;
3491 stat_buf[1] = 0;
3492 if (info->serial_signals & SerialSignal_RTS)
3493 strcat(stat_buf, "|RTS");
3494 if (info->serial_signals & SerialSignal_CTS)
3495 strcat(stat_buf, "|CTS");
3496 if (info->serial_signals & SerialSignal_DTR)
3497 strcat(stat_buf, "|DTR");
3498 if (info->serial_signals & SerialSignal_DSR)
3499 strcat(stat_buf, "|DSR");
3500 if (info->serial_signals & SerialSignal_DCD)
3501 strcat(stat_buf, "|CD");
3502 if (info->serial_signals & SerialSignal_RI)
3503 strcat(stat_buf, "|RI");
3504
3505 if (info->params.mode == MGSL_MODE_HDLC ||
3506 info->params.mode == MGSL_MODE_RAW ) {
3507 seq_printf(m, " HDLC txok:%d rxok:%d",
3508 info->icount.txok, info->icount.rxok);
3509 if (info->icount.txunder)
3510 seq_printf(m, " txunder:%d", info->icount.txunder);
3511 if (info->icount.txabort)
3512 seq_printf(m, " txabort:%d", info->icount.txabort);
3513 if (info->icount.rxshort)
3514 seq_printf(m, " rxshort:%d", info->icount.rxshort);
3515 if (info->icount.rxlong)
3516 seq_printf(m, " rxlong:%d", info->icount.rxlong);
3517 if (info->icount.rxover)
3518 seq_printf(m, " rxover:%d", info->icount.rxover);
3519 if (info->icount.rxcrc)
3520 seq_printf(m, " rxcrc:%d", info->icount.rxcrc);
3521 } else {
3522 seq_printf(m, " ASYNC tx:%d rx:%d",
3523 info->icount.tx, info->icount.rx);
3524 if (info->icount.frame)
3525 seq_printf(m, " fe:%d", info->icount.frame);
3526 if (info->icount.parity)
3527 seq_printf(m, " pe:%d", info->icount.parity);
3528 if (info->icount.brk)
3529 seq_printf(m, " brk:%d", info->icount.brk);
3530 if (info->icount.overrun)
3531 seq_printf(m, " oe:%d", info->icount.overrun);
3532 }
3533
3534 /* Append serial signal status to end */
3535 seq_printf(m, " %s\n", stat_buf+1);
3536
3537 seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
3538 info->tx_active,info->bh_requested,info->bh_running,
3539 info->pending_bh);
3540
3541 spin_lock_irqsave(&info->irq_spinlock,flags);
3542 {
3543 u16 Tcsr = usc_InReg( info, TCSR );
3544 u16 Tdmr = usc_InDmaReg( info, TDMR );
3545 u16 Ticr = usc_InReg( info, TICR );
3546 u16 Rscr = usc_InReg( info, RCSR );
3547 u16 Rdmr = usc_InDmaReg( info, RDMR );
3548 u16 Ricr = usc_InReg( info, RICR );
3549 u16 Icr = usc_InReg( info, ICR );
3550 u16 Dccr = usc_InReg( info, DCCR );
3551 u16 Tmr = usc_InReg( info, TMR );
3552 u16 Tccr = usc_InReg( info, TCCR );
3553 u16 Ccar = inw( info->io_base + CCAR );
3554 seq_printf(m, "tcsr=%04X tdmr=%04X ticr=%04X rcsr=%04X rdmr=%04X\n"
3555 "ricr=%04X icr =%04X dccr=%04X tmr=%04X tccr=%04X ccar=%04X\n",
3556 Tcsr,Tdmr,Ticr,Rscr,Rdmr,Ricr,Icr,Dccr,Tmr,Tccr,Ccar );
3557 }
3558 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3559 }
3560
3561 /* Called to print information about devices */
3562 static int mgsl_proc_show(struct seq_file *m, void *v)
3563 {
3564 struct mgsl_struct *info;
3565
3566 seq_printf(m, "synclink driver:%s\n", driver_version);
3567
3568 info = mgsl_device_list;
3569 while( info ) {
3570 line_info(m, info);
3571 info = info->next_device;
3572 }
3573 return 0;
3574 }
3575
3576 static int mgsl_proc_open(struct inode *inode, struct file *file)
3577 {
3578 return single_open(file, mgsl_proc_show, NULL);
3579 }
3580
3581 static const struct file_operations mgsl_proc_fops = {
3582 .owner = THIS_MODULE,
3583 .open = mgsl_proc_open,
3584 .read = seq_read,
3585 .llseek = seq_lseek,
3586 .release = single_release,
3587 };
3588
3589 /* mgsl_allocate_dma_buffers()
3590 *
3591 * Allocate and format DMA buffers (ISA adapter)
3592 * or format shared memory buffers (PCI adapter).
3593 *
3594 * Arguments: info pointer to device instance data
3595 * Return Value: 0 if success, otherwise error
3596 */
3597 static int mgsl_allocate_dma_buffers(struct mgsl_struct *info)
3598 {
3599 unsigned short BuffersPerFrame;
3600
3601 info->last_mem_alloc = 0;
3602
3603 /* Calculate the number of DMA buffers necessary to hold the */
3604 /* largest allowable frame size. Note: If the max frame size is */
3605 /* not an even multiple of the DMA buffer size then we need to */
3606 /* round the buffer count per frame up one. */
3607
3608 BuffersPerFrame = (unsigned short)(info->max_frame_size/DMABUFFERSIZE);
3609 if ( info->max_frame_size % DMABUFFERSIZE )
3610 BuffersPerFrame++;
3611
3612 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
3613 /*
3614 * The PCI adapter has 256KBytes of shared memory to use.
3615 * This is 64 PAGE_SIZE buffers.
3616 *
3617 * The first page is used for padding at this time so the
3618 * buffer list does not begin at offset 0 of the PCI
3619 * adapter's shared memory.
3620 *
3621 * The 2nd page is used for the buffer list. A 4K buffer
3622 * list can hold 128 DMA_BUFFER structures at 32 bytes
3623 * each.
3624 *
3625 * This leaves 62 4K pages.
3626 *
3627 * The next N pages are used for transmit frame(s). We
3628 * reserve enough 4K page blocks to hold the required
3629 * number of transmit dma buffers (num_tx_dma_buffers),
3630 * each of MaxFrameSize size.
3631 *
3632 * Of the remaining pages (62-N), determine how many can
3633 * be used to receive full MaxFrameSize inbound frames
3634 */
3635 info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame;
3636 info->rx_buffer_count = 62 - info->tx_buffer_count;
3637 } else {
3638 /* Calculate the number of PAGE_SIZE buffers needed for */
3639 /* receive and transmit DMA buffers. */
3640
3641
3642 /* Calculate the number of DMA buffers necessary to */
3643 /* hold 7 max size receive frames and one max size transmit frame. */
3644 /* The receive buffer count is bumped by one so we avoid an */
3645 /* End of List condition if all receive buffers are used when */
3646 /* using linked list DMA buffers. */
3647
3648 info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame;
3649 info->rx_buffer_count = (BuffersPerFrame * MAXRXFRAMES) + 6;
3650
3651 /*
3652 * limit total TxBuffers & RxBuffers to 62 4K total
3653 * (ala PCI Allocation)
3654 */
3655
3656 if ( (info->tx_buffer_count + info->rx_buffer_count) > 62 )
3657 info->rx_buffer_count = 62 - info->tx_buffer_count;
3658
3659 }
3660
3661 if ( debug_level >= DEBUG_LEVEL_INFO )
3662 printk("%s(%d):Allocating %d TX and %d RX DMA buffers.\n",
3663 __FILE__,__LINE__, info->tx_buffer_count,info->rx_buffer_count);
3664
3665 if ( mgsl_alloc_buffer_list_memory( info ) < 0 ||
3666 mgsl_alloc_frame_memory(info, info->rx_buffer_list, info->rx_buffer_count) < 0 ||
3667 mgsl_alloc_frame_memory(info, info->tx_buffer_list, info->tx_buffer_count) < 0 ||
3668 mgsl_alloc_intermediate_rxbuffer_memory(info) < 0 ||
3669 mgsl_alloc_intermediate_txbuffer_memory(info) < 0 ) {
3670 printk("%s(%d):Can't allocate DMA buffer memory\n",__FILE__,__LINE__);
3671 return -ENOMEM;
3672 }
3673
3674 mgsl_reset_rx_dma_buffers( info );
3675 mgsl_reset_tx_dma_buffers( info );
3676
3677 return 0;
3678
3679 } /* end of mgsl_allocate_dma_buffers() */
3680
3681 /*
3682 * mgsl_alloc_buffer_list_memory()
3683 *
3684 * Allocate a common DMA buffer for use as the
3685 * receive and transmit buffer lists.
3686 *
3687 * A buffer list is a set of buffer entries where each entry contains
3688 * a pointer to an actual buffer and a pointer to the next buffer entry
3689 * (plus some other info about the buffer).
3690 *
3691 * The buffer entries for a list are built to form a circular list so
3692 * that when the entire list has been traversed you start back at the
3693 * beginning.
3694 *
3695 * This function allocates memory for just the buffer entries.
3696 * The links (pointer to next entry) are filled in with the physical
3697 * address of the next entry so the adapter can navigate the list
3698 * using bus master DMA. The pointers to the actual buffers are filled
3699 * out later when the actual buffers are allocated.
3700 *
3701 * Arguments: info pointer to device instance data
3702 * Return Value: 0 if success, otherwise error
3703 */
3704 static int mgsl_alloc_buffer_list_memory( struct mgsl_struct *info )
3705 {
3706 unsigned int i;
3707
3708 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
3709 /* PCI adapter uses shared memory. */
3710 info->buffer_list = info->memory_base + info->last_mem_alloc;
3711 info->buffer_list_phys = info->last_mem_alloc;
3712 info->last_mem_alloc += BUFFERLISTSIZE;
3713 } else {
3714 /* ISA adapter uses system memory. */
3715 /* The buffer lists are allocated as a common buffer that both */
3716 /* the processor and adapter can access. This allows the driver to */
3717 /* inspect portions of the buffer while other portions are being */
3718 /* updated by the adapter using Bus Master DMA. */
3719
3720 info->buffer_list = dma_alloc_coherent(NULL, BUFFERLISTSIZE, &info->buffer_list_dma_addr, GFP_KERNEL);
3721 if (info->buffer_list == NULL)
3722 return -ENOMEM;
3723 info->buffer_list_phys = (u32)(info->buffer_list_dma_addr);
3724 }
3725
3726 /* We got the memory for the buffer entry lists. */
3727 /* Initialize the memory block to all zeros. */
3728 memset( info->buffer_list, 0, BUFFERLISTSIZE );
3729
3730 /* Save virtual address pointers to the receive and */
3731 /* transmit buffer lists. (Receive 1st). These pointers will */
3732 /* be used by the processor to access the lists. */
3733 info->rx_buffer_list = (DMABUFFERENTRY *)info->buffer_list;
3734 info->tx_buffer_list = (DMABUFFERENTRY *)info->buffer_list;
3735 info->tx_buffer_list += info->rx_buffer_count;
3736
3737 /*
3738 * Build the links for the buffer entry lists such that
3739 * two circular lists are built. (Transmit and Receive).
3740 *
3741 * Note: the links are physical addresses
3742 * which are read by the adapter to determine the next
3743 * buffer entry to use.
3744 */
3745
3746 for ( i = 0; i < info->rx_buffer_count; i++ ) {
3747 /* calculate and store physical address of this buffer entry */
3748 info->rx_buffer_list[i].phys_entry =
3749 info->buffer_list_phys + (i * sizeof(DMABUFFERENTRY));
3750
3751 /* calculate and store physical address of */
3752 /* next entry in cirular list of entries */
3753
3754 info->rx_buffer_list[i].link = info->buffer_list_phys;
3755
3756 if ( i < info->rx_buffer_count - 1 )
3757 info->rx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY);
3758 }
3759
3760 for ( i = 0; i < info->tx_buffer_count; i++ ) {
3761 /* calculate and store physical address of this buffer entry */
3762 info->tx_buffer_list[i].phys_entry = info->buffer_list_phys +
3763 ((info->rx_buffer_count + i) * sizeof(DMABUFFERENTRY));
3764
3765 /* calculate and store physical address of */
3766 /* next entry in cirular list of entries */
3767
3768 info->tx_buffer_list[i].link = info->buffer_list_phys +
3769 info->rx_buffer_count * sizeof(DMABUFFERENTRY);
3770
3771 if ( i < info->tx_buffer_count - 1 )
3772 info->tx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY);
3773 }
3774
3775 return 0;
3776
3777 } /* end of mgsl_alloc_buffer_list_memory() */
3778
3779 /* Free DMA buffers allocated for use as the
3780 * receive and transmit buffer lists.
3781 * Warning:
3782 *
3783 * The data transfer buffers associated with the buffer list
3784 * MUST be freed before freeing the buffer list itself because
3785 * the buffer list contains the information necessary to free
3786 * the individual buffers!
3787 */
3788 static void mgsl_free_buffer_list_memory( struct mgsl_struct *info )
3789 {
3790 if (info->buffer_list && info->bus_type != MGSL_BUS_TYPE_PCI)
3791 dma_free_coherent(NULL, BUFFERLISTSIZE, info->buffer_list, info->buffer_list_dma_addr);
3792
3793 info->buffer_list = NULL;
3794 info->rx_buffer_list = NULL;
3795 info->tx_buffer_list = NULL;
3796
3797 } /* end of mgsl_free_buffer_list_memory() */
3798
3799 /*
3800 * mgsl_alloc_frame_memory()
3801 *
3802 * Allocate the frame DMA buffers used by the specified buffer list.
3803 * Each DMA buffer will be one memory page in size. This is necessary
3804 * because memory can fragment enough that it may be impossible
3805 * contiguous pages.
3806 *
3807 * Arguments:
3808 *
3809 * info pointer to device instance data
3810 * BufferList pointer to list of buffer entries
3811 * Buffercount count of buffer entries in buffer list
3812 *
3813 * Return Value: 0 if success, otherwise -ENOMEM
3814 */
3815 static int mgsl_alloc_frame_memory(struct mgsl_struct *info,DMABUFFERENTRY *BufferList,int Buffercount)
3816 {
3817 int i;
3818 u32 phys_addr;
3819
3820 /* Allocate page sized buffers for the receive buffer list */
3821
3822 for ( i = 0; i < Buffercount; i++ ) {
3823 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
3824 /* PCI adapter uses shared memory buffers. */
3825 BufferList[i].virt_addr = info->memory_base + info->last_mem_alloc;
3826 phys_addr = info->last_mem_alloc;
3827 info->last_mem_alloc += DMABUFFERSIZE;
3828 } else {
3829 /* ISA adapter uses system memory. */
3830 BufferList[i].virt_addr = dma_alloc_coherent(NULL, DMABUFFERSIZE, &BufferList[i].dma_addr, GFP_KERNEL);
3831 if (BufferList[i].virt_addr == NULL)
3832 return -ENOMEM;
3833 phys_addr = (u32)(BufferList[i].dma_addr);
3834 }
3835 BufferList[i].phys_addr = phys_addr;
3836 }
3837
3838 return 0;
3839
3840 } /* end of mgsl_alloc_frame_memory() */
3841
3842 /*
3843 * mgsl_free_frame_memory()
3844 *
3845 * Free the buffers associated with
3846 * each buffer entry of a buffer list.
3847 *
3848 * Arguments:
3849 *
3850 * info pointer to device instance data
3851 * BufferList pointer to list of buffer entries
3852 * Buffercount count of buffer entries in buffer list
3853 *
3854 * Return Value: None
3855 */
3856 static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList, int Buffercount)
3857 {
3858 int i;
3859
3860 if ( BufferList ) {
3861 for ( i = 0 ; i < Buffercount ; i++ ) {
3862 if ( BufferList[i].virt_addr ) {
3863 if ( info->bus_type != MGSL_BUS_TYPE_PCI )
3864 dma_free_coherent(NULL, DMABUFFERSIZE, BufferList[i].virt_addr, BufferList[i].dma_addr);
3865 BufferList[i].virt_addr = NULL;
3866 }
3867 }
3868 }
3869
3870 } /* end of mgsl_free_frame_memory() */
3871
3872 /* mgsl_free_dma_buffers()
3873 *
3874 * Free DMA buffers
3875 *
3876 * Arguments: info pointer to device instance data
3877 * Return Value: None
3878 */
3879 static void mgsl_free_dma_buffers( struct mgsl_struct *info )
3880 {
3881 mgsl_free_frame_memory( info, info->rx_buffer_list, info->rx_buffer_count );
3882 mgsl_free_frame_memory( info, info->tx_buffer_list, info->tx_buffer_count );
3883 mgsl_free_buffer_list_memory( info );
3884
3885 } /* end of mgsl_free_dma_buffers() */
3886
3887
3888 /*
3889 * mgsl_alloc_intermediate_rxbuffer_memory()
3890 *
3891 * Allocate a buffer large enough to hold max_frame_size. This buffer
3892 * is used to pass an assembled frame to the line discipline.
3893 *
3894 * Arguments:
3895 *
3896 * info pointer to device instance data
3897 *
3898 * Return Value: 0 if success, otherwise -ENOMEM
3899 */
3900 static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info)
3901 {
3902 info->intermediate_rxbuffer = kmalloc(info->max_frame_size, GFP_KERNEL | GFP_DMA);
3903 if ( info->intermediate_rxbuffer == NULL )
3904 return -ENOMEM;
3905
3906 return 0;
3907
3908 } /* end of mgsl_alloc_intermediate_rxbuffer_memory() */
3909
3910 /*
3911 * mgsl_free_intermediate_rxbuffer_memory()
3912 *
3913 *
3914 * Arguments:
3915 *
3916 * info pointer to device instance data
3917 *
3918 * Return Value: None
3919 */
3920 static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info)
3921 {
3922 kfree(info->intermediate_rxbuffer);
3923 info->intermediate_rxbuffer = NULL;
3924
3925 } /* end of mgsl_free_intermediate_rxbuffer_memory() */
3926
3927 /*
3928 * mgsl_alloc_intermediate_txbuffer_memory()
3929 *
3930 * Allocate intermdiate transmit buffer(s) large enough to hold max_frame_size.
3931 * This buffer is used to load transmit frames into the adapter's dma transfer
3932 * buffers when there is sufficient space.
3933 *
3934 * Arguments:
3935 *
3936 * info pointer to device instance data
3937 *
3938 * Return Value: 0 if success, otherwise -ENOMEM
3939 */
3940 static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info)
3941 {
3942 int i;
3943
3944 if ( debug_level >= DEBUG_LEVEL_INFO )
3945 printk("%s %s(%d) allocating %d tx holding buffers\n",
3946 info->device_name, __FILE__,__LINE__,info->num_tx_holding_buffers);
3947
3948 memset(info->tx_holding_buffers,0,sizeof(info->tx_holding_buffers));
3949
3950 for ( i=0; i<info->num_tx_holding_buffers; ++i) {
3951 info->tx_holding_buffers[i].buffer =
3952 kmalloc(info->max_frame_size, GFP_KERNEL);
3953 if (info->tx_holding_buffers[i].buffer == NULL) {
3954 for (--i; i >= 0; i--) {
3955 kfree(info->tx_holding_buffers[i].buffer);
3956 info->tx_holding_buffers[i].buffer = NULL;
3957 }
3958 return -ENOMEM;
3959 }
3960 }
3961
3962 return 0;
3963
3964 } /* end of mgsl_alloc_intermediate_txbuffer_memory() */
3965
3966 /*
3967 * mgsl_free_intermediate_txbuffer_memory()
3968 *
3969 *
3970 * Arguments:
3971 *
3972 * info pointer to device instance data
3973 *
3974 * Return Value: None
3975 */
3976 static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info)
3977 {
3978 int i;
3979
3980 for ( i=0; i<info->num_tx_holding_buffers; ++i ) {
3981 kfree(info->tx_holding_buffers[i].buffer);
3982 info->tx_holding_buffers[i].buffer = NULL;
3983 }
3984
3985 info->get_tx_holding_index = 0;
3986 info->put_tx_holding_index = 0;
3987 info->tx_holding_count = 0;
3988
3989 } /* end of mgsl_free_intermediate_txbuffer_memory() */
3990
3991
3992 /*
3993 * load_next_tx_holding_buffer()
3994 *
3995 * attempts to load the next buffered tx request into the
3996 * tx dma buffers
3997 *
3998 * Arguments:
3999 *
4000 * info pointer to device instance data
4001 *
4002 * Return Value: true if next buffered tx request loaded
4003 * into adapter's tx dma buffer,
4004 * false otherwise
4005 */
4006 static bool load_next_tx_holding_buffer(struct mgsl_struct *info)
4007 {
4008 bool ret = false;
4009
4010 if ( info->tx_holding_count ) {
4011 /* determine if we have enough tx dma buffers
4012 * to accommodate the next tx frame
4013 */
4014 struct tx_holding_buffer *ptx =
4015 &info->tx_holding_buffers[info->get_tx_holding_index];
4016 int num_free = num_free_tx_dma_buffers(info);
4017 int num_needed = ptx->buffer_size / DMABUFFERSIZE;
4018 if ( ptx->buffer_size % DMABUFFERSIZE )
4019 ++num_needed;
4020
4021 if (num_needed <= num_free) {
4022 info->xmit_cnt = ptx->buffer_size;
4023 mgsl_load_tx_dma_buffer(info,ptx->buffer,ptx->buffer_size);
4024
4025 --info->tx_holding_count;
4026 if ( ++info->get_tx_holding_index >= info->num_tx_holding_buffers)
4027 info->get_tx_holding_index=0;
4028
4029 /* restart transmit timer */
4030 mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(5000));
4031
4032 ret = true;
4033 }
4034 }
4035
4036 return ret;
4037 }
4038
4039 /*
4040 * save_tx_buffer_request()
4041 *
4042 * attempt to store transmit frame request for later transmission
4043 *
4044 * Arguments:
4045 *
4046 * info pointer to device instance data
4047 * Buffer pointer to buffer containing frame to load
4048 * BufferSize size in bytes of frame in Buffer
4049 *
4050 * Return Value: 1 if able to store, 0 otherwise
4051 */
4052 static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize)
4053 {
4054 struct tx_holding_buffer *ptx;
4055
4056 if ( info->tx_holding_count >= info->num_tx_holding_buffers ) {
4057 return 0; /* all buffers in use */
4058 }
4059
4060 ptx = &info->tx_holding_buffers[info->put_tx_holding_index];
4061 ptx->buffer_size = BufferSize;
4062 memcpy( ptx->buffer, Buffer, BufferSize);
4063
4064 ++info->tx_holding_count;
4065 if ( ++info->put_tx_holding_index >= info->num_tx_holding_buffers)
4066 info->put_tx_holding_index=0;
4067
4068 return 1;
4069 }
4070
4071 static int mgsl_claim_resources(struct mgsl_struct *info)
4072 {
4073 if (request_region(info->io_base,info->io_addr_size,"synclink") == NULL) {
4074 printk( "%s(%d):I/O address conflict on device %s Addr=%08X\n",
4075 __FILE__,__LINE__,info->device_name, info->io_base);
4076 return -ENODEV;
4077 }
4078 info->io_addr_requested = true;
4079
4080 if ( request_irq(info->irq_level,mgsl_interrupt,info->irq_flags,
4081 info->device_name, info ) < 0 ) {
4082 printk( "%s(%d):Cant request interrupt on device %s IRQ=%d\n",
4083 __FILE__,__LINE__,info->device_name, info->irq_level );
4084 goto errout;
4085 }
4086 info->irq_requested = true;
4087
4088 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
4089 if (request_mem_region(info->phys_memory_base,0x40000,"synclink") == NULL) {
4090 printk( "%s(%d):mem addr conflict device %s Addr=%08X\n",
4091 __FILE__,__LINE__,info->device_name, info->phys_memory_base);
4092 goto errout;
4093 }
4094 info->shared_mem_requested = true;
4095 if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclink") == NULL) {
4096 printk( "%s(%d):lcr mem addr conflict device %s Addr=%08X\n",
4097 __FILE__,__LINE__,info->device_name, info->phys_lcr_base + info->lcr_offset);
4098 goto errout;
4099 }
4100 info->lcr_mem_requested = true;
4101
4102 info->memory_base = ioremap_nocache(info->phys_memory_base,
4103 0x40000);
4104 if (!info->memory_base) {
4105 printk( "%s(%d):Cant map shared memory on device %s MemAddr=%08X\n",
4106 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
4107 goto errout;
4108 }
4109
4110 if ( !mgsl_memory_test(info) ) {
4111 printk( "%s(%d):Failed shared memory test %s MemAddr=%08X\n",
4112 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
4113 goto errout;
4114 }
4115
4116 info->lcr_base = ioremap_nocache(info->phys_lcr_base,
4117 PAGE_SIZE);
4118 if (!info->lcr_base) {
4119 printk( "%s(%d):Cant map LCR memory on device %s MemAddr=%08X\n",
4120 __FILE__,__LINE__,info->device_name, info->phys_lcr_base );
4121 goto errout;
4122 }
4123 info->lcr_base += info->lcr_offset;
4124
4125 } else {
4126 /* claim DMA channel */
4127
4128 if (request_dma(info->dma_level,info->device_name) < 0){
4129 printk( "%s(%d):Cant request DMA channel on device %s DMA=%d\n",
4130 __FILE__,__LINE__,info->device_name, info->dma_level );
4131 mgsl_release_resources( info );
4132 return -ENODEV;
4133 }
4134 info->dma_requested = true;
4135
4136 /* ISA adapter uses bus master DMA */
4137 set_dma_mode(info->dma_level,DMA_MODE_CASCADE);
4138 enable_dma(info->dma_level);
4139 }
4140
4141 if ( mgsl_allocate_dma_buffers(info) < 0 ) {
4142 printk( "%s(%d):Cant allocate DMA buffers on device %s DMA=%d\n",
4143 __FILE__,__LINE__,info->device_name, info->dma_level );
4144 goto errout;
4145 }
4146
4147 return 0;
4148 errout:
4149 mgsl_release_resources(info);
4150 return -ENODEV;
4151
4152 } /* end of mgsl_claim_resources() */
4153
4154 static void mgsl_release_resources(struct mgsl_struct *info)
4155 {
4156 if ( debug_level >= DEBUG_LEVEL_INFO )
4157 printk( "%s(%d):mgsl_release_resources(%s) entry\n",
4158 __FILE__,__LINE__,info->device_name );
4159
4160 if ( info->irq_requested ) {
4161 free_irq(info->irq_level, info);
4162 info->irq_requested = false;
4163 }
4164 if ( info->dma_requested ) {
4165 disable_dma(info->dma_level);
4166 free_dma(info->dma_level);
4167 info->dma_requested = false;
4168 }
4169 mgsl_free_dma_buffers(info);
4170 mgsl_free_intermediate_rxbuffer_memory(info);
4171 mgsl_free_intermediate_txbuffer_memory(info);
4172
4173 if ( info->io_addr_requested ) {
4174 release_region(info->io_base,info->io_addr_size);
4175 info->io_addr_requested = false;
4176 }
4177 if ( info->shared_mem_requested ) {
4178 release_mem_region(info->phys_memory_base,0x40000);
4179 info->shared_mem_requested = false;
4180 }
4181 if ( info->lcr_mem_requested ) {
4182 release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
4183 info->lcr_mem_requested = false;
4184 }
4185 if (info->memory_base){
4186 iounmap(info->memory_base);
4187 info->memory_base = NULL;
4188 }
4189 if (info->lcr_base){
4190 iounmap(info->lcr_base - info->lcr_offset);
4191 info->lcr_base = NULL;
4192 }
4193
4194 if ( debug_level >= DEBUG_LEVEL_INFO )
4195 printk( "%s(%d):mgsl_release_resources(%s) exit\n",
4196 __FILE__,__LINE__,info->device_name );
4197
4198 } /* end of mgsl_release_resources() */
4199
4200 /* mgsl_add_device()
4201 *
4202 * Add the specified device instance data structure to the
4203 * global linked list of devices and increment the device count.
4204 *
4205 * Arguments: info pointer to device instance data
4206 * Return Value: None
4207 */
4208 static void mgsl_add_device( struct mgsl_struct *info )
4209 {
4210 info->next_device = NULL;
4211 info->line = mgsl_device_count;
4212 sprintf(info->device_name,"ttySL%d",info->line);
4213
4214 if (info->line < MAX_TOTAL_DEVICES) {
4215 if (maxframe[info->line])
4216 info->max_frame_size = maxframe[info->line];
4217
4218 if (txdmabufs[info->line]) {
4219 info->num_tx_dma_buffers = txdmabufs[info->line];
4220 if (info->num_tx_dma_buffers < 1)
4221 info->num_tx_dma_buffers = 1;
4222 }
4223
4224 if (txholdbufs[info->line]) {
4225 info->num_tx_holding_buffers = txholdbufs[info->line];
4226 if (info->num_tx_holding_buffers < 1)
4227 info->num_tx_holding_buffers = 1;
4228 else if (info->num_tx_holding_buffers > MAX_TX_HOLDING_BUFFERS)
4229 info->num_tx_holding_buffers = MAX_TX_HOLDING_BUFFERS;
4230 }
4231 }
4232
4233 mgsl_device_count++;
4234
4235 if ( !mgsl_device_list )
4236 mgsl_device_list = info;
4237 else {
4238 struct mgsl_struct *current_dev = mgsl_device_list;
4239 while( current_dev->next_device )
4240 current_dev = current_dev->next_device;
4241 current_dev->next_device = info;
4242 }
4243
4244 if ( info->max_frame_size < 4096 )
4245 info->max_frame_size = 4096;
4246 else if ( info->max_frame_size > 65535 )
4247 info->max_frame_size = 65535;
4248
4249 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
4250 printk( "SyncLink PCI v%d %s: IO=%04X IRQ=%d Mem=%08X,%08X MaxFrameSize=%u\n",
4251 info->hw_version + 1, info->device_name, info->io_base, info->irq_level,
4252 info->phys_memory_base, info->phys_lcr_base,
4253 info->max_frame_size );
4254 } else {
4255 printk( "SyncLink ISA %s: IO=%04X IRQ=%d DMA=%d MaxFrameSize=%u\n",
4256 info->device_name, info->io_base, info->irq_level, info->dma_level,
4257 info->max_frame_size );
4258 }
4259
4260 #if SYNCLINK_GENERIC_HDLC
4261 hdlcdev_init(info);
4262 #endif
4263
4264 } /* end of mgsl_add_device() */
4265
4266 static const struct tty_port_operations mgsl_port_ops = {
4267 .carrier_raised = carrier_raised,
4268 .dtr_rts = dtr_rts,
4269 };
4270
4271
4272 /* mgsl_allocate_device()
4273 *
4274 * Allocate and initialize a device instance structure
4275 *
4276 * Arguments: none
4277 * Return Value: pointer to mgsl_struct if success, otherwise NULL
4278 */
4279 static struct mgsl_struct* mgsl_allocate_device(void)
4280 {
4281 struct mgsl_struct *info;
4282
4283 info = kzalloc(sizeof(struct mgsl_struct),
4284 GFP_KERNEL);
4285
4286 if (!info) {
4287 printk("Error can't allocate device instance data\n");
4288 } else {
4289 tty_port_init(&info->port);
4290 info->port.ops = &mgsl_port_ops;
4291 info->magic = MGSL_MAGIC;
4292 INIT_WORK(&info->task, mgsl_bh_handler);
4293 info->max_frame_size = 4096;
4294 info->port.close_delay = 5*HZ/10;
4295 info->port.closing_wait = 30*HZ;
4296 init_waitqueue_head(&info->status_event_wait_q);
4297 init_waitqueue_head(&info->event_wait_q);
4298 spin_lock_init(&info->irq_spinlock);
4299 spin_lock_init(&info->netlock);
4300 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
4301 info->idle_mode = HDLC_TXIDLE_FLAGS;
4302 info->num_tx_dma_buffers = 1;
4303 info->num_tx_holding_buffers = 0;
4304 }
4305
4306 return info;
4307
4308 } /* end of mgsl_allocate_device()*/
4309
4310 static const struct tty_operations mgsl_ops = {
4311 .open = mgsl_open,
4312 .close = mgsl_close,
4313 .write = mgsl_write,
4314 .put_char = mgsl_put_char,
4315 .flush_chars = mgsl_flush_chars,
4316 .write_room = mgsl_write_room,
4317 .chars_in_buffer = mgsl_chars_in_buffer,
4318 .flush_buffer = mgsl_flush_buffer,
4319 .ioctl = mgsl_ioctl,
4320 .throttle = mgsl_throttle,
4321 .unthrottle = mgsl_unthrottle,
4322 .send_xchar = mgsl_send_xchar,
4323 .break_ctl = mgsl_break,
4324 .wait_until_sent = mgsl_wait_until_sent,
4325 .set_termios = mgsl_set_termios,
4326 .stop = mgsl_stop,
4327 .start = mgsl_start,
4328 .hangup = mgsl_hangup,
4329 .tiocmget = tiocmget,
4330 .tiocmset = tiocmset,
4331 .proc_fops = &mgsl_proc_fops,
4332 };
4333
4334 /*
4335 * perform tty device initialization
4336 */
4337 static int mgsl_init_tty(void)
4338 {
4339 int rc;
4340
4341 serial_driver = alloc_tty_driver(128);
4342 if (!serial_driver)
4343 return -ENOMEM;
4344
4345 serial_driver->owner = THIS_MODULE;
4346 serial_driver->driver_name = "synclink";
4347 serial_driver->name = "ttySL";
4348 serial_driver->major = ttymajor;
4349 serial_driver->minor_start = 64;
4350 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
4351 serial_driver->subtype = SERIAL_TYPE_NORMAL;
4352 serial_driver->init_termios = tty_std_termios;
4353 serial_driver->init_termios.c_cflag =
4354 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
4355 serial_driver->init_termios.c_ispeed = 9600;
4356 serial_driver->init_termios.c_ospeed = 9600;
4357 serial_driver->flags = TTY_DRIVER_REAL_RAW;
4358 tty_set_operations(serial_driver, &mgsl_ops);
4359 if ((rc = tty_register_driver(serial_driver)) < 0) {
4360 printk("%s(%d):Couldn't register serial driver\n",
4361 __FILE__,__LINE__);
4362 put_tty_driver(serial_driver);
4363 serial_driver = NULL;
4364 return rc;
4365 }
4366
4367 printk("%s %s, tty major#%d\n",
4368 driver_name, driver_version,
4369 serial_driver->major);
4370 return 0;
4371 }
4372
4373 /* enumerate user specified ISA adapters
4374 */
4375 static void mgsl_enum_isa_devices(void)
4376 {
4377 struct mgsl_struct *info;
4378 int i;
4379
4380 /* Check for user specified ISA devices */
4381
4382 for (i=0 ;(i < MAX_ISA_DEVICES) && io[i] && irq[i]; i++){
4383 if ( debug_level >= DEBUG_LEVEL_INFO )
4384 printk("ISA device specified io=%04X,irq=%d,dma=%d\n",
4385 io[i], irq[i], dma[i] );
4386
4387 info = mgsl_allocate_device();
4388 if ( !info ) {
4389 /* error allocating device instance data */
4390 if ( debug_level >= DEBUG_LEVEL_ERROR )
4391 printk( "can't allocate device instance data.\n");
4392 continue;
4393 }
4394
4395 /* Copy user configuration info to device instance data */
4396 info->io_base = (unsigned int)io[i];
4397 info->irq_level = (unsigned int)irq[i];
4398 info->irq_level = irq_canonicalize(info->irq_level);
4399 info->dma_level = (unsigned int)dma[i];
4400 info->bus_type = MGSL_BUS_TYPE_ISA;
4401 info->io_addr_size = 16;
4402 info->irq_flags = 0;
4403
4404 mgsl_add_device( info );
4405 }
4406 }
4407
4408 static void synclink_cleanup(void)
4409 {
4410 int rc;
4411 struct mgsl_struct *info;
4412 struct mgsl_struct *tmp;
4413
4414 printk("Unloading %s: %s\n", driver_name, driver_version);
4415
4416 if (serial_driver) {
4417 if ((rc = tty_unregister_driver(serial_driver)))
4418 printk("%s(%d) failed to unregister tty driver err=%d\n",
4419 __FILE__,__LINE__,rc);
4420 put_tty_driver(serial_driver);
4421 }
4422
4423 info = mgsl_device_list;
4424 while(info) {
4425 #if SYNCLINK_GENERIC_HDLC
4426 hdlcdev_exit(info);
4427 #endif
4428 mgsl_release_resources(info);
4429 tmp = info;
4430 info = info->next_device;
4431 kfree(tmp);
4432 }
4433
4434 if (pci_registered)
4435 pci_unregister_driver(&synclink_pci_driver);
4436 }
4437
4438 static int __init synclink_init(void)
4439 {
4440 int rc;
4441
4442 if (break_on_load) {
4443 mgsl_get_text_ptr();
4444 BREAKPOINT();
4445 }
4446
4447 printk("%s %s\n", driver_name, driver_version);
4448
4449 mgsl_enum_isa_devices();
4450 if ((rc = pci_register_driver(&synclink_pci_driver)) < 0)
4451 printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
4452 else
4453 pci_registered = true;
4454
4455 if ((rc = mgsl_init_tty()) < 0)
4456 goto error;
4457
4458 return 0;
4459
4460 error:
4461 synclink_cleanup();
4462 return rc;
4463 }
4464
4465 static void __exit synclink_exit(void)
4466 {
4467 synclink_cleanup();
4468 }
4469
4470 module_init(synclink_init);
4471 module_exit(synclink_exit);
4472
4473 /*
4474 * usc_RTCmd()
4475 *
4476 * Issue a USC Receive/Transmit command to the
4477 * Channel Command/Address Register (CCAR).
4478 *
4479 * Notes:
4480 *
4481 * The command is encoded in the most significant 5 bits <15..11>
4482 * of the CCAR value. Bits <10..7> of the CCAR must be preserved
4483 * and Bits <6..0> must be written as zeros.
4484 *
4485 * Arguments:
4486 *
4487 * info pointer to device information structure
4488 * Cmd command mask (use symbolic macros)
4489 *
4490 * Return Value:
4491 *
4492 * None
4493 */
4494 static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd )
4495 {
4496 /* output command to CCAR in bits <15..11> */
4497 /* preserve bits <10..7>, bits <6..0> must be zero */
4498
4499 outw( Cmd + info->loopback_bits, info->io_base + CCAR );
4500
4501 /* Read to flush write to CCAR */
4502 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4503 inw( info->io_base + CCAR );
4504
4505 } /* end of usc_RTCmd() */
4506
4507 /*
4508 * usc_DmaCmd()
4509 *
4510 * Issue a DMA command to the DMA Command/Address Register (DCAR).
4511 *
4512 * Arguments:
4513 *
4514 * info pointer to device information structure
4515 * Cmd DMA command mask (usc_DmaCmd_XX Macros)
4516 *
4517 * Return Value:
4518 *
4519 * None
4520 */
4521 static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd )
4522 {
4523 /* write command mask to DCAR */
4524 outw( Cmd + info->mbre_bit, info->io_base );
4525
4526 /* Read to flush write to DCAR */
4527 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4528 inw( info->io_base );
4529
4530 } /* end of usc_DmaCmd() */
4531
4532 /*
4533 * usc_OutDmaReg()
4534 *
4535 * Write a 16-bit value to a USC DMA register
4536 *
4537 * Arguments:
4538 *
4539 * info pointer to device info structure
4540 * RegAddr register address (number) for write
4541 * RegValue 16-bit value to write to register
4542 *
4543 * Return Value:
4544 *
4545 * None
4546 *
4547 */
4548 static void usc_OutDmaReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue )
4549 {
4550 /* Note: The DCAR is located at the adapter base address */
4551 /* Note: must preserve state of BIT8 in DCAR */
4552
4553 outw( RegAddr + info->mbre_bit, info->io_base );
4554 outw( RegValue, info->io_base );
4555
4556 /* Read to flush write to DCAR */
4557 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4558 inw( info->io_base );
4559
4560 } /* end of usc_OutDmaReg() */
4561
4562 /*
4563 * usc_InDmaReg()
4564 *
4565 * Read a 16-bit value from a DMA register
4566 *
4567 * Arguments:
4568 *
4569 * info pointer to device info structure
4570 * RegAddr register address (number) to read from
4571 *
4572 * Return Value:
4573 *
4574 * The 16-bit value read from register
4575 *
4576 */
4577 static u16 usc_InDmaReg( struct mgsl_struct *info, u16 RegAddr )
4578 {
4579 /* Note: The DCAR is located at the adapter base address */
4580 /* Note: must preserve state of BIT8 in DCAR */
4581
4582 outw( RegAddr + info->mbre_bit, info->io_base );
4583 return inw( info->io_base );
4584
4585 } /* end of usc_InDmaReg() */
4586
4587 /*
4588 *
4589 * usc_OutReg()
4590 *
4591 * Write a 16-bit value to a USC serial channel register
4592 *
4593 * Arguments:
4594 *
4595 * info pointer to device info structure
4596 * RegAddr register address (number) to write to
4597 * RegValue 16-bit value to write to register
4598 *
4599 * Return Value:
4600 *
4601 * None
4602 *
4603 */
4604 static void usc_OutReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue )
4605 {
4606 outw( RegAddr + info->loopback_bits, info->io_base + CCAR );
4607 outw( RegValue, info->io_base + CCAR );
4608
4609 /* Read to flush write to CCAR */
4610 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4611 inw( info->io_base + CCAR );
4612
4613 } /* end of usc_OutReg() */
4614
4615 /*
4616 * usc_InReg()
4617 *
4618 * Reads a 16-bit value from a USC serial channel register
4619 *
4620 * Arguments:
4621 *
4622 * info pointer to device extension
4623 * RegAddr register address (number) to read from
4624 *
4625 * Return Value:
4626 *
4627 * 16-bit value read from register
4628 */
4629 static u16 usc_InReg( struct mgsl_struct *info, u16 RegAddr )
4630 {
4631 outw( RegAddr + info->loopback_bits, info->io_base + CCAR );
4632 return inw( info->io_base + CCAR );
4633
4634 } /* end of usc_InReg() */
4635
4636 /* usc_set_sdlc_mode()
4637 *
4638 * Set up the adapter for SDLC DMA communications.
4639 *
4640 * Arguments: info pointer to device instance data
4641 * Return Value: NONE
4642 */
4643 static void usc_set_sdlc_mode( struct mgsl_struct *info )
4644 {
4645 u16 RegValue;
4646 bool PreSL1660;
4647
4648 /*
4649 * determine if the IUSC on the adapter is pre-SL1660. If
4650 * not, take advantage of the UnderWait feature of more
4651 * modern chips. If an underrun occurs and this bit is set,
4652 * the transmitter will idle the programmed idle pattern
4653 * until the driver has time to service the underrun. Otherwise,
4654 * the dma controller may get the cycles previously requested
4655 * and begin transmitting queued tx data.
4656 */
4657 usc_OutReg(info,TMCR,0x1f);
4658 RegValue=usc_InReg(info,TMDR);
4659 PreSL1660 = (RegValue == IUSC_PRE_SL1660);
4660
4661 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
4662 {
4663 /*
4664 ** Channel Mode Register (CMR)
4665 **
4666 ** <15..14> 10 Tx Sub Modes, Send Flag on Underrun
4667 ** <13> 0 0 = Transmit Disabled (initially)
4668 ** <12> 0 1 = Consecutive Idles share common 0
4669 ** <11..8> 1110 Transmitter Mode = HDLC/SDLC Loop
4670 ** <7..4> 0000 Rx Sub Modes, addr/ctrl field handling
4671 ** <3..0> 0110 Receiver Mode = HDLC/SDLC
4672 **
4673 ** 1000 1110 0000 0110 = 0x8e06
4674 */
4675 RegValue = 0x8e06;
4676
4677 /*--------------------------------------------------
4678 * ignore user options for UnderRun Actions and
4679 * preambles
4680 *--------------------------------------------------*/
4681 }
4682 else
4683 {
4684 /* Channel mode Register (CMR)
4685 *
4686 * <15..14> 00 Tx Sub modes, Underrun Action
4687 * <13> 0 1 = Send Preamble before opening flag
4688 * <12> 0 1 = Consecutive Idles share common 0
4689 * <11..8> 0110 Transmitter mode = HDLC/SDLC
4690 * <7..4> 0000 Rx Sub modes, addr/ctrl field handling
4691 * <3..0> 0110 Receiver mode = HDLC/SDLC
4692 *
4693 * 0000 0110 0000 0110 = 0x0606
4694 */
4695 if (info->params.mode == MGSL_MODE_RAW) {
4696 RegValue = 0x0001; /* Set Receive mode = external sync */
4697
4698 usc_OutReg( info, IOCR, /* Set IOCR DCD is RxSync Detect Input */
4699 (unsigned short)((usc_InReg(info, IOCR) & ~(BIT13|BIT12)) | BIT12));
4700
4701 /*
4702 * TxSubMode:
4703 * CMR <15> 0 Don't send CRC on Tx Underrun
4704 * CMR <14> x undefined
4705 * CMR <13> 0 Send preamble before openning sync
4706 * CMR <12> 0 Send 8-bit syncs, 1=send Syncs per TxLength
4707 *
4708 * TxMode:
4709 * CMR <11-8) 0100 MonoSync
4710 *
4711 * 0x00 0100 xxxx xxxx 04xx
4712 */
4713 RegValue |= 0x0400;
4714 }
4715 else {
4716
4717 RegValue = 0x0606;
4718
4719 if ( info->params.flags & HDLC_FLAG_UNDERRUN_ABORT15 )
4720 RegValue |= BIT14;
4721 else if ( info->params.flags & HDLC_FLAG_UNDERRUN_FLAG )
4722 RegValue |= BIT15;
4723 else if ( info->params.flags & HDLC_FLAG_UNDERRUN_CRC )
4724 RegValue |= BIT15 + BIT14;
4725 }
4726
4727 if ( info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE )
4728 RegValue |= BIT13;
4729 }
4730
4731 if ( info->params.mode == MGSL_MODE_HDLC &&
4732 (info->params.flags & HDLC_FLAG_SHARE_ZERO) )
4733 RegValue |= BIT12;
4734
4735 if ( info->params.addr_filter != 0xff )
4736 {
4737 /* set up receive address filtering */
4738 usc_OutReg( info, RSR, info->params.addr_filter );
4739 RegValue |= BIT4;
4740 }
4741
4742 usc_OutReg( info, CMR, RegValue );
4743 info->cmr_value = RegValue;
4744
4745 /* Receiver mode Register (RMR)
4746 *
4747 * <15..13> 000 encoding
4748 * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1)
4749 * <10> 1 1 = Set CRC to all 1s (use for SDLC/HDLC)
4750 * <9> 0 1 = Include Receive chars in CRC
4751 * <8> 1 1 = Use Abort/PE bit as abort indicator
4752 * <7..6> 00 Even parity
4753 * <5> 0 parity disabled
4754 * <4..2> 000 Receive Char Length = 8 bits
4755 * <1..0> 00 Disable Receiver
4756 *
4757 * 0000 0101 0000 0000 = 0x0500
4758 */
4759
4760 RegValue = 0x0500;
4761
4762 switch ( info->params.encoding ) {
4763 case HDLC_ENCODING_NRZB: RegValue |= BIT13; break;
4764 case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break;
4765 case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 + BIT13; break;
4766 case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break;
4767 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 + BIT13; break;
4768 case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14; break;
4769 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14 + BIT13; break;
4770 }
4771
4772 if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT )
4773 RegValue |= BIT9;
4774 else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT )
4775 RegValue |= ( BIT12 | BIT10 | BIT9 );
4776
4777 usc_OutReg( info, RMR, RegValue );
4778
4779 /* Set the Receive count Limit Register (RCLR) to 0xffff. */
4780 /* When an opening flag of an SDLC frame is recognized the */
4781 /* Receive Character count (RCC) is loaded with the value in */
4782 /* RCLR. The RCC is decremented for each received byte. The */
4783 /* value of RCC is stored after the closing flag of the frame */
4784 /* allowing the frame size to be computed. */
4785
4786 usc_OutReg( info, RCLR, RCLRVALUE );
4787
4788 usc_RCmd( info, RCmd_SelectRicrdma_level );
4789
4790 /* Receive Interrupt Control Register (RICR)
4791 *
4792 * <15..8> ? RxFIFO DMA Request Level
4793 * <7> 0 Exited Hunt IA (Interrupt Arm)
4794 * <6> 0 Idle Received IA
4795 * <5> 0 Break/Abort IA
4796 * <4> 0 Rx Bound IA
4797 * <3> 1 Queued status reflects oldest 2 bytes in FIFO
4798 * <2> 0 Abort/PE IA
4799 * <1> 1 Rx Overrun IA
4800 * <0> 0 Select TC0 value for readback
4801 *
4802 * 0000 0000 0000 1000 = 0x000a
4803 */
4804
4805 /* Carry over the Exit Hunt and Idle Received bits */
4806 /* in case they have been armed by usc_ArmEvents. */
4807
4808 RegValue = usc_InReg( info, RICR ) & 0xc0;
4809
4810 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4811 usc_OutReg( info, RICR, (u16)(0x030a | RegValue) );
4812 else
4813 usc_OutReg( info, RICR, (u16)(0x140a | RegValue) );
4814
4815 /* Unlatch all Rx status bits and clear Rx status IRQ Pending */
4816
4817 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
4818 usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
4819
4820 /* Transmit mode Register (TMR)
4821 *
4822 * <15..13> 000 encoding
4823 * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1)
4824 * <10> 1 1 = Start CRC as all 1s (use for SDLC/HDLC)
4825 * <9> 0 1 = Tx CRC Enabled
4826 * <8> 0 1 = Append CRC to end of transmit frame
4827 * <7..6> 00 Transmit parity Even
4828 * <5> 0 Transmit parity Disabled
4829 * <4..2> 000 Tx Char Length = 8 bits
4830 * <1..0> 00 Disable Transmitter
4831 *
4832 * 0000 0100 0000 0000 = 0x0400
4833 */
4834
4835 RegValue = 0x0400;
4836
4837 switch ( info->params.encoding ) {
4838 case HDLC_ENCODING_NRZB: RegValue |= BIT13; break;
4839 case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break;
4840 case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 + BIT13; break;
4841 case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break;
4842 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 + BIT13; break;
4843 case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14; break;
4844 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14 + BIT13; break;
4845 }
4846
4847 if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT )
4848 RegValue |= BIT9 + BIT8;
4849 else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT )
4850 RegValue |= ( BIT12 | BIT10 | BIT9 | BIT8);
4851
4852 usc_OutReg( info, TMR, RegValue );
4853
4854 usc_set_txidle( info );
4855
4856
4857 usc_TCmd( info, TCmd_SelectTicrdma_level );
4858
4859 /* Transmit Interrupt Control Register (TICR)
4860 *
4861 * <15..8> ? Transmit FIFO DMA Level
4862 * <7> 0 Present IA (Interrupt Arm)
4863 * <6> 0 Idle Sent IA
4864 * <5> 1 Abort Sent IA
4865 * <4> 1 EOF/EOM Sent IA
4866 * <3> 0 CRC Sent IA
4867 * <2> 1 1 = Wait for SW Trigger to Start Frame
4868 * <1> 1 Tx Underrun IA
4869 * <0> 0 TC0 constant on read back
4870 *
4871 * 0000 0000 0011 0110 = 0x0036
4872 */
4873
4874 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4875 usc_OutReg( info, TICR, 0x0736 );
4876 else
4877 usc_OutReg( info, TICR, 0x1436 );
4878
4879 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
4880 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
4881
4882 /*
4883 ** Transmit Command/Status Register (TCSR)
4884 **
4885 ** <15..12> 0000 TCmd
4886 ** <11> 0/1 UnderWait
4887 ** <10..08> 000 TxIdle
4888 ** <7> x PreSent
4889 ** <6> x IdleSent
4890 ** <5> x AbortSent
4891 ** <4> x EOF/EOM Sent
4892 ** <3> x CRC Sent
4893 ** <2> x All Sent
4894 ** <1> x TxUnder
4895 ** <0> x TxEmpty
4896 **
4897 ** 0000 0000 0000 0000 = 0x0000
4898 */
4899 info->tcsr_value = 0;
4900
4901 if ( !PreSL1660 )
4902 info->tcsr_value |= TCSR_UNDERWAIT;
4903
4904 usc_OutReg( info, TCSR, info->tcsr_value );
4905
4906 /* Clock mode Control Register (CMCR)
4907 *
4908 * <15..14> 00 counter 1 Source = Disabled
4909 * <13..12> 00 counter 0 Source = Disabled
4910 * <11..10> 11 BRG1 Input is TxC Pin
4911 * <9..8> 11 BRG0 Input is TxC Pin
4912 * <7..6> 01 DPLL Input is BRG1 Output
4913 * <5..3> XXX TxCLK comes from Port 0
4914 * <2..0> XXX RxCLK comes from Port 1
4915 *
4916 * 0000 1111 0111 0111 = 0x0f77
4917 */
4918
4919 RegValue = 0x0f40;
4920
4921 if ( info->params.flags & HDLC_FLAG_RXC_DPLL )
4922 RegValue |= 0x0003; /* RxCLK from DPLL */
4923 else if ( info->params.flags & HDLC_FLAG_RXC_BRG )
4924 RegValue |= 0x0004; /* RxCLK from BRG0 */
4925 else if ( info->params.flags & HDLC_FLAG_RXC_TXCPIN)
4926 RegValue |= 0x0006; /* RxCLK from TXC Input */
4927 else
4928 RegValue |= 0x0007; /* RxCLK from Port1 */
4929
4930 if ( info->params.flags & HDLC_FLAG_TXC_DPLL )
4931 RegValue |= 0x0018; /* TxCLK from DPLL */
4932 else if ( info->params.flags & HDLC_FLAG_TXC_BRG )
4933 RegValue |= 0x0020; /* TxCLK from BRG0 */
4934 else if ( info->params.flags & HDLC_FLAG_TXC_RXCPIN)
4935 RegValue |= 0x0038; /* RxCLK from TXC Input */
4936 else
4937 RegValue |= 0x0030; /* TxCLK from Port0 */
4938
4939 usc_OutReg( info, CMCR, RegValue );
4940
4941
4942 /* Hardware Configuration Register (HCR)
4943 *
4944 * <15..14> 00 CTR0 Divisor:00=32,01=16,10=8,11=4
4945 * <13> 0 CTR1DSel:0=CTR0Div determines CTR0Div
4946 * <12> 0 CVOK:0=report code violation in biphase
4947 * <11..10> 00 DPLL Divisor:00=32,01=16,10=8,11=4
4948 * <9..8> XX DPLL mode:00=disable,01=NRZ,10=Biphase,11=Biphase Level
4949 * <7..6> 00 reserved
4950 * <5> 0 BRG1 mode:0=continuous,1=single cycle
4951 * <4> X BRG1 Enable
4952 * <3..2> 00 reserved
4953 * <1> 0 BRG0 mode:0=continuous,1=single cycle
4954 * <0> 0 BRG0 Enable
4955 */
4956
4957 RegValue = 0x0000;
4958
4959 if ( info->params.flags & (HDLC_FLAG_RXC_DPLL + HDLC_FLAG_TXC_DPLL) ) {
4960 u32 XtalSpeed;
4961 u32 DpllDivisor;
4962 u16 Tc;
4963
4964 /* DPLL is enabled. Use BRG1 to provide continuous reference clock */
4965 /* for DPLL. DPLL mode in HCR is dependent on the encoding used. */
4966
4967 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4968 XtalSpeed = 11059200;
4969 else
4970 XtalSpeed = 14745600;
4971
4972 if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
4973 DpllDivisor = 16;
4974 RegValue |= BIT10;
4975 }
4976 else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
4977 DpllDivisor = 8;
4978 RegValue |= BIT11;
4979 }
4980 else
4981 DpllDivisor = 32;
4982
4983 /* Tc = (Xtal/Speed) - 1 */
4984 /* If twice the remainder of (Xtal/Speed) is greater than Speed */
4985 /* then rounding up gives a more precise time constant. Instead */
4986 /* of rounding up and then subtracting 1 we just don't subtract */
4987 /* the one in this case. */
4988
4989 /*--------------------------------------------------
4990 * ejz: for DPLL mode, application should use the
4991 * same clock speed as the partner system, even
4992 * though clocking is derived from the input RxData.
4993 * In case the user uses a 0 for the clock speed,
4994 * default to 0xffffffff and don't try to divide by
4995 * zero
4996 *--------------------------------------------------*/
4997 if ( info->params.clock_speed )
4998 {
4999 Tc = (u16)((XtalSpeed/DpllDivisor)/info->params.clock_speed);
5000 if ( !((((XtalSpeed/DpllDivisor) % info->params.clock_speed) * 2)
5001 / info->params.clock_speed) )
5002 Tc--;
5003 }
5004 else
5005 Tc = -1;
5006
5007
5008 /* Write 16-bit Time Constant for BRG1 */
5009 usc_OutReg( info, TC1R, Tc );
5010
5011 RegValue |= BIT4; /* enable BRG1 */
5012
5013 switch ( info->params.encoding ) {
5014 case HDLC_ENCODING_NRZ:
5015 case HDLC_ENCODING_NRZB:
5016 case HDLC_ENCODING_NRZI_MARK:
5017 case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT8; break;
5018 case HDLC_ENCODING_BIPHASE_MARK:
5019 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT9; break;
5020 case HDLC_ENCODING_BIPHASE_LEVEL:
5021 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT9 + BIT8; break;
5022 }
5023 }
5024
5025 usc_OutReg( info, HCR, RegValue );
5026
5027
5028 /* Channel Control/status Register (CCSR)
5029 *
5030 * <15> X RCC FIFO Overflow status (RO)
5031 * <14> X RCC FIFO Not Empty status (RO)
5032 * <13> 0 1 = Clear RCC FIFO (WO)
5033 * <12> X DPLL Sync (RW)
5034 * <11> X DPLL 2 Missed Clocks status (RO)
5035 * <10> X DPLL 1 Missed Clock status (RO)
5036 * <9..8> 00 DPLL Resync on rising and falling edges (RW)
5037 * <7> X SDLC Loop On status (RO)
5038 * <6> X SDLC Loop Send status (RO)
5039 * <5> 1 Bypass counters for TxClk and RxClk (RW)
5040 * <4..2> 000 Last Char of SDLC frame has 8 bits (RW)
5041 * <1..0> 00 reserved
5042 *
5043 * 0000 0000 0010 0000 = 0x0020
5044 */
5045
5046 usc_OutReg( info, CCSR, 0x1020 );
5047
5048
5049 if ( info->params.flags & HDLC_FLAG_AUTO_CTS ) {
5050 usc_OutReg( info, SICR,
5051 (u16)(usc_InReg(info,SICR) | SICR_CTS_INACTIVE) );
5052 }
5053
5054
5055 /* enable Master Interrupt Enable bit (MIE) */
5056 usc_EnableMasterIrqBit( info );
5057
5058 usc_ClearIrqPendingBits( info, RECEIVE_STATUS + RECEIVE_DATA +
5059 TRANSMIT_STATUS + TRANSMIT_DATA + MISC);
5060
5061 /* arm RCC underflow interrupt */
5062 usc_OutReg(info, SICR, (u16)(usc_InReg(info,SICR) | BIT3));
5063 usc_EnableInterrupts(info, MISC);
5064
5065 info->mbre_bit = 0;
5066 outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */
5067 usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */
5068 info->mbre_bit = BIT8;
5069 outw( BIT8, info->io_base ); /* set Master Bus Enable (DCAR) */
5070
5071 if (info->bus_type == MGSL_BUS_TYPE_ISA) {
5072 /* Enable DMAEN (Port 7, Bit 14) */
5073 /* This connects the DMA request signal to the ISA bus */
5074 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) & ~BIT14));
5075 }
5076
5077 /* DMA Control Register (DCR)
5078 *
5079 * <15..14> 10 Priority mode = Alternating Tx/Rx
5080 * 01 Rx has priority
5081 * 00 Tx has priority
5082 *
5083 * <13> 1 Enable Priority Preempt per DCR<15..14>
5084 * (WARNING DCR<11..10> must be 00 when this is 1)
5085 * 0 Choose activate channel per DCR<11..10>
5086 *
5087 * <12> 0 Little Endian for Array/List
5088 * <11..10> 00 Both Channels can use each bus grant
5089 * <9..6> 0000 reserved
5090 * <5> 0 7 CLK - Minimum Bus Re-request Interval
5091 * <4> 0 1 = drive D/C and S/D pins
5092 * <3> 1 1 = Add one wait state to all DMA cycles.
5093 * <2> 0 1 = Strobe /UAS on every transfer.
5094 * <1..0> 11 Addr incrementing only affects LS24 bits
5095 *
5096 * 0110 0000 0000 1011 = 0x600b
5097 */
5098
5099 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
5100 /* PCI adapter does not need DMA wait state */
5101 usc_OutDmaReg( info, DCR, 0xa00b );
5102 }
5103 else
5104 usc_OutDmaReg( info, DCR, 0x800b );
5105
5106
5107 /* Receive DMA mode Register (RDMR)
5108 *
5109 * <15..14> 11 DMA mode = Linked List Buffer mode
5110 * <13> 1 RSBinA/L = store Rx status Block in Arrary/List entry
5111 * <12> 1 Clear count of List Entry after fetching
5112 * <11..10> 00 Address mode = Increment
5113 * <9> 1 Terminate Buffer on RxBound
5114 * <8> 0 Bus Width = 16bits
5115 * <7..0> ? status Bits (write as 0s)
5116 *
5117 * 1111 0010 0000 0000 = 0xf200
5118 */
5119
5120 usc_OutDmaReg( info, RDMR, 0xf200 );
5121
5122
5123 /* Transmit DMA mode Register (TDMR)
5124 *
5125 * <15..14> 11 DMA mode = Linked List Buffer mode
5126 * <13> 1 TCBinA/L = fetch Tx Control Block from List entry
5127 * <12> 1 Clear count of List Entry after fetching
5128 * <11..10> 00 Address mode = Increment
5129 * <9> 1 Terminate Buffer on end of frame
5130 * <8> 0 Bus Width = 16bits
5131 * <7..0> ? status Bits (Read Only so write as 0)
5132 *
5133 * 1111 0010 0000 0000 = 0xf200
5134 */
5135
5136 usc_OutDmaReg( info, TDMR, 0xf200 );
5137
5138
5139 /* DMA Interrupt Control Register (DICR)
5140 *
5141 * <15> 1 DMA Interrupt Enable
5142 * <14> 0 1 = Disable IEO from USC
5143 * <13> 0 1 = Don't provide vector during IntAck
5144 * <12> 1 1 = Include status in Vector
5145 * <10..2> 0 reserved, Must be 0s
5146 * <1> 0 1 = Rx DMA Interrupt Enabled
5147 * <0> 0 1 = Tx DMA Interrupt Enabled
5148 *
5149 * 1001 0000 0000 0000 = 0x9000
5150 */
5151
5152 usc_OutDmaReg( info, DICR, 0x9000 );
5153
5154 usc_InDmaReg( info, RDMR ); /* clear pending receive DMA IRQ bits */
5155 usc_InDmaReg( info, TDMR ); /* clear pending transmit DMA IRQ bits */
5156 usc_OutDmaReg( info, CDIR, 0x0303 ); /* clear IUS and Pending for Tx and Rx */
5157
5158 /* Channel Control Register (CCR)
5159 *
5160 * <15..14> 10 Use 32-bit Tx Control Blocks (TCBs)
5161 * <13> 0 Trigger Tx on SW Command Disabled
5162 * <12> 0 Flag Preamble Disabled
5163 * <11..10> 00 Preamble Length
5164 * <9..8> 00 Preamble Pattern
5165 * <7..6> 10 Use 32-bit Rx status Blocks (RSBs)
5166 * <5> 0 Trigger Rx on SW Command Disabled
5167 * <4..0> 0 reserved
5168 *
5169 * 1000 0000 1000 0000 = 0x8080
5170 */
5171
5172 RegValue = 0x8080;
5173
5174 switch ( info->params.preamble_length ) {
5175 case HDLC_PREAMBLE_LENGTH_16BITS: RegValue |= BIT10; break;
5176 case HDLC_PREAMBLE_LENGTH_32BITS: RegValue |= BIT11; break;
5177 case HDLC_PREAMBLE_LENGTH_64BITS: RegValue |= BIT11 + BIT10; break;
5178 }
5179
5180 switch ( info->params.preamble ) {
5181 case HDLC_PREAMBLE_PATTERN_FLAGS: RegValue |= BIT8 + BIT12; break;
5182 case HDLC_PREAMBLE_PATTERN_ONES: RegValue |= BIT8; break;
5183 case HDLC_PREAMBLE_PATTERN_10: RegValue |= BIT9; break;
5184 case HDLC_PREAMBLE_PATTERN_01: RegValue |= BIT9 + BIT8; break;
5185 }
5186
5187 usc_OutReg( info, CCR, RegValue );
5188
5189
5190 /*
5191 * Burst/Dwell Control Register
5192 *
5193 * <15..8> 0x20 Maximum number of transfers per bus grant
5194 * <7..0> 0x00 Maximum number of clock cycles per bus grant
5195 */
5196
5197 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
5198 /* don't limit bus occupancy on PCI adapter */
5199 usc_OutDmaReg( info, BDCR, 0x0000 );
5200 }
5201 else
5202 usc_OutDmaReg( info, BDCR, 0x2000 );
5203
5204 usc_stop_transmitter(info);
5205 usc_stop_receiver(info);
5206
5207 } /* end of usc_set_sdlc_mode() */
5208
5209 /* usc_enable_loopback()
5210 *
5211 * Set the 16C32 for internal loopback mode.
5212 * The TxCLK and RxCLK signals are generated from the BRG0 and
5213 * the TxD is looped back to the RxD internally.
5214 *
5215 * Arguments: info pointer to device instance data
5216 * enable 1 = enable loopback, 0 = disable
5217 * Return Value: None
5218 */
5219 static void usc_enable_loopback(struct mgsl_struct *info, int enable)
5220 {
5221 if (enable) {
5222 /* blank external TXD output */
5223 usc_OutReg(info,IOCR,usc_InReg(info,IOCR) | (BIT7+BIT6));
5224
5225 /* Clock mode Control Register (CMCR)
5226 *
5227 * <15..14> 00 counter 1 Disabled
5228 * <13..12> 00 counter 0 Disabled
5229 * <11..10> 11 BRG1 Input is TxC Pin
5230 * <9..8> 11 BRG0 Input is TxC Pin
5231 * <7..6> 01 DPLL Input is BRG1 Output
5232 * <5..3> 100 TxCLK comes from BRG0
5233 * <2..0> 100 RxCLK comes from BRG0
5234 *
5235 * 0000 1111 0110 0100 = 0x0f64
5236 */
5237
5238 usc_OutReg( info, CMCR, 0x0f64 );
5239
5240 /* Write 16-bit Time Constant for BRG0 */
5241 /* use clock speed if available, otherwise use 8 for diagnostics */
5242 if (info->params.clock_speed) {
5243 if (info->bus_type == MGSL_BUS_TYPE_PCI)
5244 usc_OutReg(info, TC0R, (u16)((11059200/info->params.clock_speed)-1));
5245 else
5246 usc_OutReg(info, TC0R, (u16)((14745600/info->params.clock_speed)-1));
5247 } else
5248 usc_OutReg(info, TC0R, (u16)8);
5249
5250 /* Hardware Configuration Register (HCR) Clear Bit 1, BRG0
5251 mode = Continuous Set Bit 0 to enable BRG0. */
5252 usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
5253
5254 /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
5255 usc_OutReg(info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004));
5256
5257 /* set Internal Data loopback mode */
5258 info->loopback_bits = 0x300;
5259 outw( 0x0300, info->io_base + CCAR );
5260 } else {
5261 /* enable external TXD output */
5262 usc_OutReg(info,IOCR,usc_InReg(info,IOCR) & ~(BIT7+BIT6));
5263
5264 /* clear Internal Data loopback mode */
5265 info->loopback_bits = 0;
5266 outw( 0,info->io_base + CCAR );
5267 }
5268
5269 } /* end of usc_enable_loopback() */
5270
5271 /* usc_enable_aux_clock()
5272 *
5273 * Enabled the AUX clock output at the specified frequency.
5274 *
5275 * Arguments:
5276 *
5277 * info pointer to device extension
5278 * data_rate data rate of clock in bits per second
5279 * A data rate of 0 disables the AUX clock.
5280 *
5281 * Return Value: None
5282 */
5283 static void usc_enable_aux_clock( struct mgsl_struct *info, u32 data_rate )
5284 {
5285 u32 XtalSpeed;
5286 u16 Tc;
5287
5288 if ( data_rate ) {
5289 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
5290 XtalSpeed = 11059200;
5291 else
5292 XtalSpeed = 14745600;
5293
5294
5295 /* Tc = (Xtal/Speed) - 1 */
5296 /* If twice the remainder of (Xtal/Speed) is greater than Speed */
5297 /* then rounding up gives a more precise time constant. Instead */
5298 /* of rounding up and then subtracting 1 we just don't subtract */
5299 /* the one in this case. */
5300
5301
5302 Tc = (u16)(XtalSpeed/data_rate);
5303 if ( !(((XtalSpeed % data_rate) * 2) / data_rate) )
5304 Tc--;
5305
5306 /* Write 16-bit Time Constant for BRG0 */
5307 usc_OutReg( info, TC0R, Tc );
5308
5309 /*
5310 * Hardware Configuration Register (HCR)
5311 * Clear Bit 1, BRG0 mode = Continuous
5312 * Set Bit 0 to enable BRG0.
5313 */
5314
5315 usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
5316
5317 /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
5318 usc_OutReg( info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) );
5319 } else {
5320 /* data rate == 0 so turn off BRG0 */
5321 usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) );
5322 }
5323
5324 } /* end of usc_enable_aux_clock() */
5325
5326 /*
5327 *
5328 * usc_process_rxoverrun_sync()
5329 *
5330 * This function processes a receive overrun by resetting the
5331 * receive DMA buffers and issuing a Purge Rx FIFO command
5332 * to allow the receiver to continue receiving.
5333 *
5334 * Arguments:
5335 *
5336 * info pointer to device extension
5337 *
5338 * Return Value: None
5339 */
5340 static void usc_process_rxoverrun_sync( struct mgsl_struct *info )
5341 {
5342 int start_index;
5343 int end_index;
5344 int frame_start_index;
5345 bool start_of_frame_found = false;
5346 bool end_of_frame_found = false;
5347 bool reprogram_dma = false;
5348
5349 DMABUFFERENTRY *buffer_list = info->rx_buffer_list;
5350 u32 phys_addr;
5351
5352 usc_DmaCmd( info, DmaCmd_PauseRxChannel );
5353 usc_RCmd( info, RCmd_EnterHuntmode );
5354 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5355
5356 /* CurrentRxBuffer points to the 1st buffer of the next */
5357 /* possibly available receive frame. */
5358
5359 frame_start_index = start_index = end_index = info->current_rx_buffer;
5360
5361 /* Search for an unfinished string of buffers. This means */
5362 /* that a receive frame started (at least one buffer with */
5363 /* count set to zero) but there is no terminiting buffer */
5364 /* (status set to non-zero). */
5365
5366 while( !buffer_list[end_index].count )
5367 {
5368 /* Count field has been reset to zero by 16C32. */
5369 /* This buffer is currently in use. */
5370
5371 if ( !start_of_frame_found )
5372 {
5373 start_of_frame_found = true;
5374 frame_start_index = end_index;
5375 end_of_frame_found = false;
5376 }
5377
5378 if ( buffer_list[end_index].status )
5379 {
5380 /* Status field has been set by 16C32. */
5381 /* This is the last buffer of a received frame. */
5382
5383 /* We want to leave the buffers for this frame intact. */
5384 /* Move on to next possible frame. */
5385
5386 start_of_frame_found = false;
5387 end_of_frame_found = true;
5388 }
5389
5390 /* advance to next buffer entry in linked list */
5391 end_index++;
5392 if ( end_index == info->rx_buffer_count )
5393 end_index = 0;
5394
5395 if ( start_index == end_index )
5396 {
5397 /* The entire list has been searched with all Counts == 0 and */
5398 /* all Status == 0. The receive buffers are */
5399 /* completely screwed, reset all receive buffers! */
5400 mgsl_reset_rx_dma_buffers( info );
5401 frame_start_index = 0;
5402 start_of_frame_found = false;
5403 reprogram_dma = true;
5404 break;
5405 }
5406 }
5407
5408 if ( start_of_frame_found && !end_of_frame_found )
5409 {
5410 /* There is an unfinished string of receive DMA buffers */
5411 /* as a result of the receiver overrun. */
5412
5413 /* Reset the buffers for the unfinished frame */
5414 /* and reprogram the receive DMA controller to start */
5415 /* at the 1st buffer of unfinished frame. */
5416
5417 start_index = frame_start_index;
5418
5419 do
5420 {
5421 *((unsigned long *)&(info->rx_buffer_list[start_index++].count)) = DMABUFFERSIZE;
5422
5423 /* Adjust index for wrap around. */
5424 if ( start_index == info->rx_buffer_count )
5425 start_index = 0;
5426
5427 } while( start_index != end_index );
5428
5429 reprogram_dma = true;
5430 }
5431
5432 if ( reprogram_dma )
5433 {
5434 usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
5435 usc_ClearIrqPendingBits(info, RECEIVE_DATA|RECEIVE_STATUS);
5436 usc_UnlatchRxstatusBits(info, RECEIVE_DATA|RECEIVE_STATUS);
5437
5438 usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
5439
5440 /* This empties the receive FIFO and loads the RCC with RCLR */
5441 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5442
5443 /* program 16C32 with physical address of 1st DMA buffer entry */
5444 phys_addr = info->rx_buffer_list[frame_start_index].phys_entry;
5445 usc_OutDmaReg( info, NRARL, (u16)phys_addr );
5446 usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) );
5447
5448 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
5449 usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS );
5450 usc_EnableInterrupts( info, RECEIVE_STATUS );
5451
5452 /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */
5453 /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */
5454
5455 usc_OutDmaReg( info, RDIAR, BIT3 + BIT2 );
5456 usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) );
5457 usc_DmaCmd( info, DmaCmd_InitRxChannel );
5458 if ( info->params.flags & HDLC_FLAG_AUTO_DCD )
5459 usc_EnableReceiver(info,ENABLE_AUTO_DCD);
5460 else
5461 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
5462 }
5463 else
5464 {
5465 /* This empties the receive FIFO and loads the RCC with RCLR */
5466 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5467 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5468 }
5469
5470 } /* end of usc_process_rxoverrun_sync() */
5471
5472 /* usc_stop_receiver()
5473 *
5474 * Disable USC receiver
5475 *
5476 * Arguments: info pointer to device instance data
5477 * Return Value: None
5478 */
5479 static void usc_stop_receiver( struct mgsl_struct *info )
5480 {
5481 if (debug_level >= DEBUG_LEVEL_ISR)
5482 printk("%s(%d):usc_stop_receiver(%s)\n",
5483 __FILE__,__LINE__, info->device_name );
5484
5485 /* Disable receive DMA channel. */
5486 /* This also disables receive DMA channel interrupts */
5487 usc_DmaCmd( info, DmaCmd_ResetRxChannel );
5488
5489 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
5490 usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS );
5491 usc_DisableInterrupts( info, RECEIVE_DATA + RECEIVE_STATUS );
5492
5493 usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
5494
5495 /* This empties the receive FIFO and loads the RCC with RCLR */
5496 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5497 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5498
5499 info->rx_enabled = false;
5500 info->rx_overflow = false;
5501 info->rx_rcc_underrun = false;
5502
5503 } /* end of stop_receiver() */
5504
5505 /* usc_start_receiver()
5506 *
5507 * Enable the USC receiver
5508 *
5509 * Arguments: info pointer to device instance data
5510 * Return Value: None
5511 */
5512 static void usc_start_receiver( struct mgsl_struct *info )
5513 {
5514 u32 phys_addr;
5515
5516 if (debug_level >= DEBUG_LEVEL_ISR)
5517 printk("%s(%d):usc_start_receiver(%s)\n",
5518 __FILE__,__LINE__, info->device_name );
5519
5520 mgsl_reset_rx_dma_buffers( info );
5521 usc_stop_receiver( info );
5522
5523 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5524 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5525
5526 if ( info->params.mode == MGSL_MODE_HDLC ||
5527 info->params.mode == MGSL_MODE_RAW ) {
5528 /* DMA mode Transfers */
5529 /* Program the DMA controller. */
5530 /* Enable the DMA controller end of buffer interrupt. */
5531
5532 /* program 16C32 with physical address of 1st DMA buffer entry */
5533 phys_addr = info->rx_buffer_list[0].phys_entry;
5534 usc_OutDmaReg( info, NRARL, (u16)phys_addr );
5535 usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) );
5536
5537 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
5538 usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS );
5539 usc_EnableInterrupts( info, RECEIVE_STATUS );
5540
5541 /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */
5542 /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */
5543
5544 usc_OutDmaReg( info, RDIAR, BIT3 + BIT2 );
5545 usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) );
5546 usc_DmaCmd( info, DmaCmd_InitRxChannel );
5547 if ( info->params.flags & HDLC_FLAG_AUTO_DCD )
5548 usc_EnableReceiver(info,ENABLE_AUTO_DCD);
5549 else
5550 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
5551 } else {
5552 usc_UnlatchRxstatusBits(info, RXSTATUS_ALL);
5553 usc_ClearIrqPendingBits(info, RECEIVE_DATA + RECEIVE_STATUS);
5554 usc_EnableInterrupts(info, RECEIVE_DATA);
5555
5556 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5557 usc_RCmd( info, RCmd_EnterHuntmode );
5558
5559 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
5560 }
5561
5562 usc_OutReg( info, CCSR, 0x1020 );
5563
5564 info->rx_enabled = true;
5565
5566 } /* end of usc_start_receiver() */
5567
5568 /* usc_start_transmitter()
5569 *
5570 * Enable the USC transmitter and send a transmit frame if
5571 * one is loaded in the DMA buffers.
5572 *
5573 * Arguments: info pointer to device instance data
5574 * Return Value: None
5575 */
5576 static void usc_start_transmitter( struct mgsl_struct *info )
5577 {
5578 u32 phys_addr;
5579 unsigned int FrameSize;
5580
5581 if (debug_level >= DEBUG_LEVEL_ISR)
5582 printk("%s(%d):usc_start_transmitter(%s)\n",
5583 __FILE__,__LINE__, info->device_name );
5584
5585 if ( info->xmit_cnt ) {
5586
5587 /* If auto RTS enabled and RTS is inactive, then assert */
5588 /* RTS and set a flag indicating that the driver should */
5589 /* negate RTS when the transmission completes. */
5590
5591 info->drop_rts_on_tx_done = false;
5592
5593 if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
5594 usc_get_serial_signals( info );
5595 if ( !(info->serial_signals & SerialSignal_RTS) ) {
5596 info->serial_signals |= SerialSignal_RTS;
5597 usc_set_serial_signals( info );
5598 info->drop_rts_on_tx_done = true;
5599 }
5600 }
5601
5602
5603 if ( info->params.mode == MGSL_MODE_ASYNC ) {
5604 if ( !info->tx_active ) {
5605 usc_UnlatchTxstatusBits(info, TXSTATUS_ALL);
5606 usc_ClearIrqPendingBits(info, TRANSMIT_STATUS + TRANSMIT_DATA);
5607 usc_EnableInterrupts(info, TRANSMIT_DATA);
5608 usc_load_txfifo(info);
5609 }
5610 } else {
5611 /* Disable transmit DMA controller while programming. */
5612 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
5613
5614 /* Transmit DMA buffer is loaded, so program USC */
5615 /* to send the frame contained in the buffers. */
5616
5617 FrameSize = info->tx_buffer_list[info->start_tx_dma_buffer].rcc;
5618
5619 /* if operating in Raw sync mode, reset the rcc component
5620 * of the tx dma buffer entry, otherwise, the serial controller
5621 * will send a closing sync char after this count.
5622 */
5623 if ( info->params.mode == MGSL_MODE_RAW )
5624 info->tx_buffer_list[info->start_tx_dma_buffer].rcc = 0;
5625
5626 /* Program the Transmit Character Length Register (TCLR) */
5627 /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
5628 usc_OutReg( info, TCLR, (u16)FrameSize );
5629
5630 usc_RTCmd( info, RTCmd_PurgeTxFifo );
5631
5632 /* Program the address of the 1st DMA Buffer Entry in linked list */
5633 phys_addr = info->tx_buffer_list[info->start_tx_dma_buffer].phys_entry;
5634 usc_OutDmaReg( info, NTARL, (u16)phys_addr );
5635 usc_OutDmaReg( info, NTARU, (u16)(phys_addr >> 16) );
5636
5637 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
5638 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
5639 usc_EnableInterrupts( info, TRANSMIT_STATUS );
5640
5641 if ( info->params.mode == MGSL_MODE_RAW &&
5642 info->num_tx_dma_buffers > 1 ) {
5643 /* When running external sync mode, attempt to 'stream' transmit */
5644 /* by filling tx dma buffers as they become available. To do this */
5645 /* we need to enable Tx DMA EOB Status interrupts : */
5646 /* */
5647 /* 1. Arm End of Buffer (EOB) Transmit DMA Interrupt (BIT2 of TDIAR) */
5648 /* 2. Enable Transmit DMA Interrupts (BIT0 of DICR) */
5649
5650 usc_OutDmaReg( info, TDIAR, BIT2|BIT3 );
5651 usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT0) );
5652 }
5653
5654 /* Initialize Transmit DMA Channel */
5655 usc_DmaCmd( info, DmaCmd_InitTxChannel );
5656
5657 usc_TCmd( info, TCmd_SendFrame );
5658
5659 mod_timer(&info->tx_timer, jiffies +
5660 msecs_to_jiffies(5000));
5661 }
5662 info->tx_active = true;
5663 }
5664
5665 if ( !info->tx_enabled ) {
5666 info->tx_enabled = true;
5667 if ( info->params.flags & HDLC_FLAG_AUTO_CTS )
5668 usc_EnableTransmitter(info,ENABLE_AUTO_CTS);
5669 else
5670 usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL);
5671 }
5672
5673 } /* end of usc_start_transmitter() */
5674
5675 /* usc_stop_transmitter()
5676 *
5677 * Stops the transmitter and DMA
5678 *
5679 * Arguments: info pointer to device isntance data
5680 * Return Value: None
5681 */
5682 static void usc_stop_transmitter( struct mgsl_struct *info )
5683 {
5684 if (debug_level >= DEBUG_LEVEL_ISR)
5685 printk("%s(%d):usc_stop_transmitter(%s)\n",
5686 __FILE__,__LINE__, info->device_name );
5687
5688 del_timer(&info->tx_timer);
5689
5690 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
5691 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA );
5692 usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA );
5693
5694 usc_EnableTransmitter(info,DISABLE_UNCONDITIONAL);
5695 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
5696 usc_RTCmd( info, RTCmd_PurgeTxFifo );
5697
5698 info->tx_enabled = false;
5699 info->tx_active = false;
5700
5701 } /* end of usc_stop_transmitter() */
5702
5703 /* usc_load_txfifo()
5704 *
5705 * Fill the transmit FIFO until the FIFO is full or
5706 * there is no more data to load.
5707 *
5708 * Arguments: info pointer to device extension (instance data)
5709 * Return Value: None
5710 */
5711 static void usc_load_txfifo( struct mgsl_struct *info )
5712 {
5713 int Fifocount;
5714 u8 TwoBytes[2];
5715
5716 if ( !info->xmit_cnt && !info->x_char )
5717 return;
5718
5719 /* Select transmit FIFO status readback in TICR */
5720 usc_TCmd( info, TCmd_SelectTicrTxFifostatus );
5721
5722 /* load the Transmit FIFO until FIFOs full or all data sent */
5723
5724 while( (Fifocount = usc_InReg(info, TICR) >> 8) && info->xmit_cnt ) {
5725 /* there is more space in the transmit FIFO and */
5726 /* there is more data in transmit buffer */
5727
5728 if ( (info->xmit_cnt > 1) && (Fifocount > 1) && !info->x_char ) {
5729 /* write a 16-bit word from transmit buffer to 16C32 */
5730
5731 TwoBytes[0] = info->xmit_buf[info->xmit_tail++];
5732 info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
5733 TwoBytes[1] = info->xmit_buf[info->xmit_tail++];
5734 info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
5735
5736 outw( *((u16 *)TwoBytes), info->io_base + DATAREG);
5737
5738 info->xmit_cnt -= 2;
5739 info->icount.tx += 2;
5740 } else {
5741 /* only 1 byte left to transmit or 1 FIFO slot left */
5742
5743 outw( (inw( info->io_base + CCAR) & 0x0780) | (TDR+LSBONLY),
5744 info->io_base + CCAR );
5745
5746 if (info->x_char) {
5747 /* transmit pending high priority char */
5748 outw( info->x_char,info->io_base + CCAR );
5749 info->x_char = 0;
5750 } else {
5751 outw( info->xmit_buf[info->xmit_tail++],info->io_base + CCAR );
5752 info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
5753 info->xmit_cnt--;
5754 }
5755 info->icount.tx++;
5756 }
5757 }
5758
5759 } /* end of usc_load_txfifo() */
5760
5761 /* usc_reset()
5762 *
5763 * Reset the adapter to a known state and prepare it for further use.
5764 *
5765 * Arguments: info pointer to device instance data
5766 * Return Value: None
5767 */
5768 static void usc_reset( struct mgsl_struct *info )
5769 {
5770 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
5771 int i;
5772 u32 readval;
5773
5774 /* Set BIT30 of Misc Control Register */
5775 /* (Local Control Register 0x50) to force reset of USC. */
5776
5777 volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
5778 u32 *LCR0BRDR = (u32 *)(info->lcr_base + 0x28);
5779
5780 info->misc_ctrl_value |= BIT30;
5781 *MiscCtrl = info->misc_ctrl_value;
5782
5783 /*
5784 * Force at least 170ns delay before clearing
5785 * reset bit. Each read from LCR takes at least
5786 * 30ns so 10 times for 300ns to be safe.
5787 */
5788 for(i=0;i<10;i++)
5789 readval = *MiscCtrl;
5790
5791 info->misc_ctrl_value &= ~BIT30;
5792 *MiscCtrl = info->misc_ctrl_value;
5793
5794 *LCR0BRDR = BUS_DESCRIPTOR(
5795 1, // Write Strobe Hold (0-3)
5796 2, // Write Strobe Delay (0-3)
5797 2, // Read Strobe Delay (0-3)
5798 0, // NWDD (Write data-data) (0-3)
5799 4, // NWAD (Write Addr-data) (0-31)
5800 0, // NXDA (Read/Write Data-Addr) (0-3)
5801 0, // NRDD (Read Data-Data) (0-3)
5802 5 // NRAD (Read Addr-Data) (0-31)
5803 );
5804 } else {
5805 /* do HW reset */
5806 outb( 0,info->io_base + 8 );
5807 }
5808
5809 info->mbre_bit = 0;
5810 info->loopback_bits = 0;
5811 info->usc_idle_mode = 0;
5812
5813 /*
5814 * Program the Bus Configuration Register (BCR)
5815 *
5816 * <15> 0 Don't use separate address
5817 * <14..6> 0 reserved
5818 * <5..4> 00 IAckmode = Default, don't care
5819 * <3> 1 Bus Request Totem Pole output
5820 * <2> 1 Use 16 Bit data bus
5821 * <1> 0 IRQ Totem Pole output
5822 * <0> 0 Don't Shift Right Addr
5823 *
5824 * 0000 0000 0000 1100 = 0x000c
5825 *
5826 * By writing to io_base + SDPIN the Wait/Ack pin is
5827 * programmed to work as a Wait pin.
5828 */
5829
5830 outw( 0x000c,info->io_base + SDPIN );
5831
5832
5833 outw( 0,info->io_base );
5834 outw( 0,info->io_base + CCAR );
5835
5836 /* select little endian byte ordering */
5837 usc_RTCmd( info, RTCmd_SelectLittleEndian );
5838
5839
5840 /* Port Control Register (PCR)
5841 *
5842 * <15..14> 11 Port 7 is Output (~DMAEN, Bit 14 : 0 = Enabled)
5843 * <13..12> 11 Port 6 is Output (~INTEN, Bit 12 : 0 = Enabled)
5844 * <11..10> 00 Port 5 is Input (No Connect, Don't Care)
5845 * <9..8> 00 Port 4 is Input (No Connect, Don't Care)
5846 * <7..6> 11 Port 3 is Output (~RTS, Bit 6 : 0 = Enabled )
5847 * <5..4> 11 Port 2 is Output (~DTR, Bit 4 : 0 = Enabled )
5848 * <3..2> 01 Port 1 is Input (Dedicated RxC)
5849 * <1..0> 01 Port 0 is Input (Dedicated TxC)
5850 *
5851 * 1111 0000 1111 0101 = 0xf0f5
5852 */
5853
5854 usc_OutReg( info, PCR, 0xf0f5 );
5855
5856
5857 /*
5858 * Input/Output Control Register
5859 *
5860 * <15..14> 00 CTS is active low input
5861 * <13..12> 00 DCD is active low input
5862 * <11..10> 00 TxREQ pin is input (DSR)
5863 * <9..8> 00 RxREQ pin is input (RI)
5864 * <7..6> 00 TxD is output (Transmit Data)
5865 * <5..3> 000 TxC Pin in Input (14.7456MHz Clock)
5866 * <2..0> 100 RxC is Output (drive with BRG0)
5867 *
5868 * 0000 0000 0000 0100 = 0x0004
5869 */
5870
5871 usc_OutReg( info, IOCR, 0x0004 );
5872
5873 } /* end of usc_reset() */
5874
5875 /* usc_set_async_mode()
5876 *
5877 * Program adapter for asynchronous communications.
5878 *
5879 * Arguments: info pointer to device instance data
5880 * Return Value: None
5881 */
5882 static void usc_set_async_mode( struct mgsl_struct *info )
5883 {
5884 u16 RegValue;
5885
5886 /* disable interrupts while programming USC */
5887 usc_DisableMasterIrqBit( info );
5888
5889 outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */
5890 usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */
5891
5892 usc_loopback_frame( info );
5893
5894 /* Channel mode Register (CMR)
5895 *
5896 * <15..14> 00 Tx Sub modes, 00 = 1 Stop Bit
5897 * <13..12> 00 00 = 16X Clock
5898 * <11..8> 0000 Transmitter mode = Asynchronous
5899 * <7..6> 00 reserved?
5900 * <5..4> 00 Rx Sub modes, 00 = 16X Clock
5901 * <3..0> 0000 Receiver mode = Asynchronous
5902 *
5903 * 0000 0000 0000 0000 = 0x0
5904 */
5905
5906 RegValue = 0;
5907 if ( info->params.stop_bits != 1 )
5908 RegValue |= BIT14;
5909 usc_OutReg( info, CMR, RegValue );
5910
5911
5912 /* Receiver mode Register (RMR)
5913 *
5914 * <15..13> 000 encoding = None
5915 * <12..08> 00000 reserved (Sync Only)
5916 * <7..6> 00 Even parity
5917 * <5> 0 parity disabled
5918 * <4..2> 000 Receive Char Length = 8 bits
5919 * <1..0> 00 Disable Receiver
5920 *
5921 * 0000 0000 0000 0000 = 0x0
5922 */
5923
5924 RegValue = 0;
5925
5926 if ( info->params.data_bits != 8 )
5927 RegValue |= BIT4+BIT3+BIT2;
5928
5929 if ( info->params.parity != ASYNC_PARITY_NONE ) {
5930 RegValue |= BIT5;
5931 if ( info->params.parity != ASYNC_PARITY_ODD )
5932 RegValue |= BIT6;
5933 }
5934
5935 usc_OutReg( info, RMR, RegValue );
5936
5937
5938 /* Set IRQ trigger level */
5939
5940 usc_RCmd( info, RCmd_SelectRicrIntLevel );
5941
5942
5943 /* Receive Interrupt Control Register (RICR)
5944 *
5945 * <15..8> ? RxFIFO IRQ Request Level
5946 *
5947 * Note: For async mode the receive FIFO level must be set
5948 * to 0 to avoid the situation where the FIFO contains fewer bytes
5949 * than the trigger level and no more data is expected.
5950 *
5951 * <7> 0 Exited Hunt IA (Interrupt Arm)
5952 * <6> 0 Idle Received IA
5953 * <5> 0 Break/Abort IA
5954 * <4> 0 Rx Bound IA
5955 * <3> 0 Queued status reflects oldest byte in FIFO
5956 * <2> 0 Abort/PE IA
5957 * <1> 0 Rx Overrun IA
5958 * <0> 0 Select TC0 value for readback
5959 *
5960 * 0000 0000 0100 0000 = 0x0000 + (FIFOLEVEL in MSB)
5961 */
5962
5963 usc_OutReg( info, RICR, 0x0000 );
5964
5965 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
5966 usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
5967
5968
5969 /* Transmit mode Register (TMR)
5970 *
5971 * <15..13> 000 encoding = None
5972 * <12..08> 00000 reserved (Sync Only)
5973 * <7..6> 00 Transmit parity Even
5974 * <5> 0 Transmit parity Disabled
5975 * <4..2> 000 Tx Char Length = 8 bits
5976 * <1..0> 00 Disable Transmitter
5977 *
5978 * 0000 0000 0000 0000 = 0x0
5979 */
5980
5981 RegValue = 0;
5982
5983 if ( info->params.data_bits != 8 )
5984 RegValue |= BIT4+BIT3+BIT2;
5985
5986 if ( info->params.parity != ASYNC_PARITY_NONE ) {
5987 RegValue |= BIT5;
5988 if ( info->params.parity != ASYNC_PARITY_ODD )
5989 RegValue |= BIT6;
5990 }
5991
5992 usc_OutReg( info, TMR, RegValue );
5993
5994 usc_set_txidle( info );
5995
5996
5997 /* Set IRQ trigger level */
5998
5999 usc_TCmd( info, TCmd_SelectTicrIntLevel );
6000
6001
6002 /* Transmit Interrupt Control Register (TICR)
6003 *
6004 * <15..8> ? Transmit FIFO IRQ Level
6005 * <7> 0 Present IA (Interrupt Arm)
6006 * <6> 1 Idle Sent IA
6007 * <5> 0 Abort Sent IA
6008 * <4> 0 EOF/EOM Sent IA
6009 * <3> 0 CRC Sent IA
6010 * <2> 0 1 = Wait for SW Trigger to Start Frame
6011 * <1> 0 Tx Underrun IA
6012 * <0> 0 TC0 constant on read back
6013 *
6014 * 0000 0000 0100 0000 = 0x0040
6015 */
6016
6017 usc_OutReg( info, TICR, 0x1f40 );
6018
6019 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
6020 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
6021
6022 usc_enable_async_clock( info, info->params.data_rate );
6023
6024
6025 /* Channel Control/status Register (CCSR)
6026 *
6027 * <15> X RCC FIFO Overflow status (RO)
6028 * <14> X RCC FIFO Not Empty status (RO)
6029 * <13> 0 1 = Clear RCC FIFO (WO)
6030 * <12> X DPLL in Sync status (RO)
6031 * <11> X DPLL 2 Missed Clocks status (RO)
6032 * <10> X DPLL 1 Missed Clock status (RO)
6033 * <9..8> 00 DPLL Resync on rising and falling edges (RW)
6034 * <7> X SDLC Loop On status (RO)
6035 * <6> X SDLC Loop Send status (RO)
6036 * <5> 1 Bypass counters for TxClk and RxClk (RW)
6037 * <4..2> 000 Last Char of SDLC frame has 8 bits (RW)
6038 * <1..0> 00 reserved
6039 *
6040 * 0000 0000 0010 0000 = 0x0020
6041 */
6042
6043 usc_OutReg( info, CCSR, 0x0020 );
6044
6045 usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA +
6046 RECEIVE_DATA + RECEIVE_STATUS );
6047
6048 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA +
6049 RECEIVE_DATA + RECEIVE_STATUS );
6050
6051 usc_EnableMasterIrqBit( info );
6052
6053 if (info->bus_type == MGSL_BUS_TYPE_ISA) {
6054 /* Enable INTEN (Port 6, Bit12) */
6055 /* This connects the IRQ request signal to the ISA bus */
6056 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12));
6057 }
6058
6059 if (info->params.loopback) {
6060 info->loopback_bits = 0x300;
6061 outw(0x0300, info->io_base + CCAR);
6062 }
6063
6064 } /* end of usc_set_async_mode() */
6065
6066 /* usc_loopback_frame()
6067 *
6068 * Loop back a small (2 byte) dummy SDLC frame.
6069 * Interrupts and DMA are NOT used. The purpose of this is to
6070 * clear any 'stale' status info left over from running in async mode.
6071 *
6072 * The 16C32 shows the strange behaviour of marking the 1st
6073 * received SDLC frame with a CRC error even when there is no
6074 * CRC error. To get around this a small dummy from of 2 bytes
6075 * is looped back when switching from async to sync mode.
6076 *
6077 * Arguments: info pointer to device instance data
6078 * Return Value: None
6079 */
6080 static void usc_loopback_frame( struct mgsl_struct *info )
6081 {
6082 int i;
6083 unsigned long oldmode = info->params.mode;
6084
6085 info->params.mode = MGSL_MODE_HDLC;
6086
6087 usc_DisableMasterIrqBit( info );
6088
6089 usc_set_sdlc_mode( info );
6090 usc_enable_loopback( info, 1 );
6091
6092 /* Write 16-bit Time Constant for BRG0 */
6093 usc_OutReg( info, TC0R, 0 );
6094
6095 /* Channel Control Register (CCR)
6096 *
6097 * <15..14> 00 Don't use 32-bit Tx Control Blocks (TCBs)
6098 * <13> 0 Trigger Tx on SW Command Disabled
6099 * <12> 0 Flag Preamble Disabled
6100 * <11..10> 00 Preamble Length = 8-Bits
6101 * <9..8> 01 Preamble Pattern = flags
6102 * <7..6> 10 Don't use 32-bit Rx status Blocks (RSBs)
6103 * <5> 0 Trigger Rx on SW Command Disabled
6104 * <4..0> 0 reserved
6105 *
6106 * 0000 0001 0000 0000 = 0x0100
6107 */
6108
6109 usc_OutReg( info, CCR, 0x0100 );
6110
6111 /* SETUP RECEIVER */
6112 usc_RTCmd( info, RTCmd_PurgeRxFifo );
6113 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
6114
6115 /* SETUP TRANSMITTER */
6116 /* Program the Transmit Character Length Register (TCLR) */
6117 /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
6118 usc_OutReg( info, TCLR, 2 );
6119 usc_RTCmd( info, RTCmd_PurgeTxFifo );
6120
6121 /* unlatch Tx status bits, and start transmit channel. */
6122 usc_UnlatchTxstatusBits(info,TXSTATUS_ALL);
6123 outw(0,info->io_base + DATAREG);
6124
6125 /* ENABLE TRANSMITTER */
6126 usc_TCmd( info, TCmd_SendFrame );
6127 usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL);
6128
6129 /* WAIT FOR RECEIVE COMPLETE */
6130 for (i=0 ; i<1000 ; i++)
6131 if (usc_InReg( info, RCSR ) & (BIT8 + BIT4 + BIT3 + BIT1))
6132 break;
6133
6134 /* clear Internal Data loopback mode */
6135 usc_enable_loopback(info, 0);
6136
6137 usc_EnableMasterIrqBit(info);
6138
6139 info->params.mode = oldmode;
6140
6141 } /* end of usc_loopback_frame() */
6142
6143 /* usc_set_sync_mode() Programs the USC for SDLC communications.
6144 *
6145 * Arguments: info pointer to adapter info structure
6146 * Return Value: None
6147 */
6148 static void usc_set_sync_mode( struct mgsl_struct *info )
6149 {
6150 usc_loopback_frame( info );
6151 usc_set_sdlc_mode( info );
6152
6153 if (info->bus_type == MGSL_BUS_TYPE_ISA) {
6154 /* Enable INTEN (Port 6, Bit12) */
6155 /* This connects the IRQ request signal to the ISA bus */
6156 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12));
6157 }
6158
6159 usc_enable_aux_clock(info, info->params.clock_speed);
6160
6161 if (info->params.loopback)
6162 usc_enable_loopback(info,1);
6163
6164 } /* end of mgsl_set_sync_mode() */
6165
6166 /* usc_set_txidle() Set the HDLC idle mode for the transmitter.
6167 *
6168 * Arguments: info pointer to device instance data
6169 * Return Value: None
6170 */
6171 static void usc_set_txidle( struct mgsl_struct *info )
6172 {
6173 u16 usc_idle_mode = IDLEMODE_FLAGS;
6174
6175 /* Map API idle mode to USC register bits */
6176
6177 switch( info->idle_mode ){
6178 case HDLC_TXIDLE_FLAGS: usc_idle_mode = IDLEMODE_FLAGS; break;
6179 case HDLC_TXIDLE_ALT_ZEROS_ONES: usc_idle_mode = IDLEMODE_ALT_ONE_ZERO; break;
6180 case HDLC_TXIDLE_ZEROS: usc_idle_mode = IDLEMODE_ZERO; break;
6181 case HDLC_TXIDLE_ONES: usc_idle_mode = IDLEMODE_ONE; break;
6182 case HDLC_TXIDLE_ALT_MARK_SPACE: usc_idle_mode = IDLEMODE_ALT_MARK_SPACE; break;
6183 case HDLC_TXIDLE_SPACE: usc_idle_mode = IDLEMODE_SPACE; break;
6184 case HDLC_TXIDLE_MARK: usc_idle_mode = IDLEMODE_MARK; break;
6185 }
6186
6187 info->usc_idle_mode = usc_idle_mode;
6188 //usc_OutReg(info, TCSR, usc_idle_mode);
6189 info->tcsr_value &= ~IDLEMODE_MASK; /* clear idle mode bits */
6190 info->tcsr_value += usc_idle_mode;
6191 usc_OutReg(info, TCSR, info->tcsr_value);
6192
6193 /*
6194 * if SyncLink WAN adapter is running in external sync mode, the
6195 * transmitter has been set to Monosync in order to try to mimic
6196 * a true raw outbound bit stream. Monosync still sends an open/close
6197 * sync char at the start/end of a frame. Try to match those sync
6198 * patterns to the idle mode set here
6199 */
6200 if ( info->params.mode == MGSL_MODE_RAW ) {
6201 unsigned char syncpat = 0;
6202 switch( info->idle_mode ) {
6203 case HDLC_TXIDLE_FLAGS:
6204 syncpat = 0x7e;
6205 break;
6206 case HDLC_TXIDLE_ALT_ZEROS_ONES:
6207 syncpat = 0x55;
6208 break;
6209 case HDLC_TXIDLE_ZEROS:
6210 case HDLC_TXIDLE_SPACE:
6211 syncpat = 0x00;
6212 break;
6213 case HDLC_TXIDLE_ONES:
6214 case HDLC_TXIDLE_MARK:
6215 syncpat = 0xff;
6216 break;
6217 case HDLC_TXIDLE_ALT_MARK_SPACE:
6218 syncpat = 0xaa;
6219 break;
6220 }
6221
6222 usc_SetTransmitSyncChars(info,syncpat,syncpat);
6223 }
6224
6225 } /* end of usc_set_txidle() */
6226
6227 /* usc_get_serial_signals()
6228 *
6229 * Query the adapter for the state of the V24 status (input) signals.
6230 *
6231 * Arguments: info pointer to device instance data
6232 * Return Value: None
6233 */
6234 static void usc_get_serial_signals( struct mgsl_struct *info )
6235 {
6236 u16 status;
6237
6238 /* clear all serial signals except DTR and RTS */
6239 info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
6240
6241 /* Read the Misc Interrupt status Register (MISR) to get */
6242 /* the V24 status signals. */
6243
6244 status = usc_InReg( info, MISR );
6245
6246 /* set serial signal bits to reflect MISR */
6247
6248 if ( status & MISCSTATUS_CTS )
6249 info->serial_signals |= SerialSignal_CTS;
6250
6251 if ( status & MISCSTATUS_DCD )
6252 info->serial_signals |= SerialSignal_DCD;
6253
6254 if ( status & MISCSTATUS_RI )
6255 info->serial_signals |= SerialSignal_RI;
6256
6257 if ( status & MISCSTATUS_DSR )
6258 info->serial_signals |= SerialSignal_DSR;
6259
6260 } /* end of usc_get_serial_signals() */
6261
6262 /* usc_set_serial_signals()
6263 *
6264 * Set the state of DTR and RTS based on contents of
6265 * serial_signals member of device extension.
6266 *
6267 * Arguments: info pointer to device instance data
6268 * Return Value: None
6269 */
6270 static void usc_set_serial_signals( struct mgsl_struct *info )
6271 {
6272 u16 Control;
6273 unsigned char V24Out = info->serial_signals;
6274
6275 /* get the current value of the Port Control Register (PCR) */
6276
6277 Control = usc_InReg( info, PCR );
6278
6279 if ( V24Out & SerialSignal_RTS )
6280 Control &= ~(BIT6);
6281 else
6282 Control |= BIT6;
6283
6284 if ( V24Out & SerialSignal_DTR )
6285 Control &= ~(BIT4);
6286 else
6287 Control |= BIT4;
6288
6289 usc_OutReg( info, PCR, Control );
6290
6291 } /* end of usc_set_serial_signals() */
6292
6293 /* usc_enable_async_clock()
6294 *
6295 * Enable the async clock at the specified frequency.
6296 *
6297 * Arguments: info pointer to device instance data
6298 * data_rate data rate of clock in bps
6299 * 0 disables the AUX clock.
6300 * Return Value: None
6301 */
6302 static void usc_enable_async_clock( struct mgsl_struct *info, u32 data_rate )
6303 {
6304 if ( data_rate ) {
6305 /*
6306 * Clock mode Control Register (CMCR)
6307 *
6308 * <15..14> 00 counter 1 Disabled
6309 * <13..12> 00 counter 0 Disabled
6310 * <11..10> 11 BRG1 Input is TxC Pin
6311 * <9..8> 11 BRG0 Input is TxC Pin
6312 * <7..6> 01 DPLL Input is BRG1 Output
6313 * <5..3> 100 TxCLK comes from BRG0
6314 * <2..0> 100 RxCLK comes from BRG0
6315 *
6316 * 0000 1111 0110 0100 = 0x0f64
6317 */
6318
6319 usc_OutReg( info, CMCR, 0x0f64 );
6320
6321
6322 /*
6323 * Write 16-bit Time Constant for BRG0
6324 * Time Constant = (ClkSpeed / data_rate) - 1
6325 * ClkSpeed = 921600 (ISA), 691200 (PCI)
6326 */
6327
6328 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
6329 usc_OutReg( info, TC0R, (u16)((691200/data_rate) - 1) );
6330 else
6331 usc_OutReg( info, TC0R, (u16)((921600/data_rate) - 1) );
6332
6333
6334 /*
6335 * Hardware Configuration Register (HCR)
6336 * Clear Bit 1, BRG0 mode = Continuous
6337 * Set Bit 0 to enable BRG0.
6338 */
6339
6340 usc_OutReg( info, HCR,
6341 (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
6342
6343
6344 /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
6345
6346 usc_OutReg( info, IOCR,
6347 (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) );
6348 } else {
6349 /* data rate == 0 so turn off BRG0 */
6350 usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) );
6351 }
6352
6353 } /* end of usc_enable_async_clock() */
6354
6355 /*
6356 * Buffer Structures:
6357 *
6358 * Normal memory access uses virtual addresses that can make discontiguous
6359 * physical memory pages appear to be contiguous in the virtual address
6360 * space (the processors memory mapping handles the conversions).
6361 *
6362 * DMA transfers require physically contiguous memory. This is because
6363 * the DMA system controller and DMA bus masters deal with memory using
6364 * only physical addresses.
6365 *
6366 * This causes a problem under Windows NT when large DMA buffers are
6367 * needed. Fragmentation of the nonpaged pool prevents allocations of
6368 * physically contiguous buffers larger than the PAGE_SIZE.
6369 *
6370 * However the 16C32 supports Bus Master Scatter/Gather DMA which
6371 * allows DMA transfers to physically discontiguous buffers. Information
6372 * about each data transfer buffer is contained in a memory structure
6373 * called a 'buffer entry'. A list of buffer entries is maintained
6374 * to track and control the use of the data transfer buffers.
6375 *
6376 * To support this strategy we will allocate sufficient PAGE_SIZE
6377 * contiguous memory buffers to allow for the total required buffer
6378 * space.
6379 *
6380 * The 16C32 accesses the list of buffer entries using Bus Master
6381 * DMA. Control information is read from the buffer entries by the
6382 * 16C32 to control data transfers. status information is written to
6383 * the buffer entries by the 16C32 to indicate the status of completed
6384 * transfers.
6385 *
6386 * The CPU writes control information to the buffer entries to control
6387 * the 16C32 and reads status information from the buffer entries to
6388 * determine information about received and transmitted frames.
6389 *
6390 * Because the CPU and 16C32 (adapter) both need simultaneous access
6391 * to the buffer entries, the buffer entry memory is allocated with
6392 * HalAllocateCommonBuffer(). This restricts the size of the buffer
6393 * entry list to PAGE_SIZE.
6394 *
6395 * The actual data buffers on the other hand will only be accessed
6396 * by the CPU or the adapter but not by both simultaneously. This allows
6397 * Scatter/Gather packet based DMA procedures for using physically
6398 * discontiguous pages.
6399 */
6400
6401 /*
6402 * mgsl_reset_tx_dma_buffers()
6403 *
6404 * Set the count for all transmit buffers to 0 to indicate the
6405 * buffer is available for use and set the current buffer to the
6406 * first buffer. This effectively makes all buffers free and
6407 * discards any data in buffers.
6408 *
6409 * Arguments: info pointer to device instance data
6410 * Return Value: None
6411 */
6412 static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info )
6413 {
6414 unsigned int i;
6415
6416 for ( i = 0; i < info->tx_buffer_count; i++ ) {
6417 *((unsigned long *)&(info->tx_buffer_list[i].count)) = 0;
6418 }
6419
6420 info->current_tx_buffer = 0;
6421 info->start_tx_dma_buffer = 0;
6422 info->tx_dma_buffers_used = 0;
6423
6424 info->get_tx_holding_index = 0;
6425 info->put_tx_holding_index = 0;
6426 info->tx_holding_count = 0;
6427
6428 } /* end of mgsl_reset_tx_dma_buffers() */
6429
6430 /*
6431 * num_free_tx_dma_buffers()
6432 *
6433 * returns the number of free tx dma buffers available
6434 *
6435 * Arguments: info pointer to device instance data
6436 * Return Value: number of free tx dma buffers
6437 */
6438 static int num_free_tx_dma_buffers(struct mgsl_struct *info)
6439 {
6440 return info->tx_buffer_count - info->tx_dma_buffers_used;
6441 }
6442
6443 /*
6444 * mgsl_reset_rx_dma_buffers()
6445 *
6446 * Set the count for all receive buffers to DMABUFFERSIZE
6447 * and set the current buffer to the first buffer. This effectively
6448 * makes all buffers free and discards any data in buffers.
6449 *
6450 * Arguments: info pointer to device instance data
6451 * Return Value: None
6452 */
6453 static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info )
6454 {
6455 unsigned int i;
6456
6457 for ( i = 0; i < info->rx_buffer_count; i++ ) {
6458 *((unsigned long *)&(info->rx_buffer_list[i].count)) = DMABUFFERSIZE;
6459 // info->rx_buffer_list[i].count = DMABUFFERSIZE;
6460 // info->rx_buffer_list[i].status = 0;
6461 }
6462
6463 info->current_rx_buffer = 0;
6464
6465 } /* end of mgsl_reset_rx_dma_buffers() */
6466
6467 /*
6468 * mgsl_free_rx_frame_buffers()
6469 *
6470 * Free the receive buffers used by a received SDLC
6471 * frame such that the buffers can be reused.
6472 *
6473 * Arguments:
6474 *
6475 * info pointer to device instance data
6476 * StartIndex index of 1st receive buffer of frame
6477 * EndIndex index of last receive buffer of frame
6478 *
6479 * Return Value: None
6480 */
6481 static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex )
6482 {
6483 bool Done = false;
6484 DMABUFFERENTRY *pBufEntry;
6485 unsigned int Index;
6486
6487 /* Starting with 1st buffer entry of the frame clear the status */
6488 /* field and set the count field to DMA Buffer Size. */
6489
6490 Index = StartIndex;
6491
6492 while( !Done ) {
6493 pBufEntry = &(info->rx_buffer_list[Index]);
6494
6495 if ( Index == EndIndex ) {
6496 /* This is the last buffer of the frame! */
6497 Done = true;
6498 }
6499
6500 /* reset current buffer for reuse */
6501 // pBufEntry->status = 0;
6502 // pBufEntry->count = DMABUFFERSIZE;
6503 *((unsigned long *)&(pBufEntry->count)) = DMABUFFERSIZE;
6504
6505 /* advance to next buffer entry in linked list */
6506 Index++;
6507 if ( Index == info->rx_buffer_count )
6508 Index = 0;
6509 }
6510
6511 /* set current buffer to next buffer after last buffer of frame */
6512 info->current_rx_buffer = Index;
6513
6514 } /* end of free_rx_frame_buffers() */
6515
6516 /* mgsl_get_rx_frame()
6517 *
6518 * This function attempts to return a received SDLC frame from the
6519 * receive DMA buffers. Only frames received without errors are returned.
6520 *
6521 * Arguments: info pointer to device extension
6522 * Return Value: true if frame returned, otherwise false
6523 */
6524 static bool mgsl_get_rx_frame(struct mgsl_struct *info)
6525 {
6526 unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */
6527 unsigned short status;
6528 DMABUFFERENTRY *pBufEntry;
6529 unsigned int framesize = 0;
6530 bool ReturnCode = false;
6531 unsigned long flags;
6532 struct tty_struct *tty = info->port.tty;
6533 bool return_frame = false;
6534
6535 /*
6536 * current_rx_buffer points to the 1st buffer of the next available
6537 * receive frame. To find the last buffer of the frame look for
6538 * a non-zero status field in the buffer entries. (The status
6539 * field is set by the 16C32 after completing a receive frame.
6540 */
6541
6542 StartIndex = EndIndex = info->current_rx_buffer;
6543
6544 while( !info->rx_buffer_list[EndIndex].status ) {
6545 /*
6546 * If the count field of the buffer entry is non-zero then
6547 * this buffer has not been used. (The 16C32 clears the count
6548 * field when it starts using the buffer.) If an unused buffer
6549 * is encountered then there are no frames available.
6550 */
6551
6552 if ( info->rx_buffer_list[EndIndex].count )
6553 goto Cleanup;
6554
6555 /* advance to next buffer entry in linked list */
6556 EndIndex++;
6557 if ( EndIndex == info->rx_buffer_count )
6558 EndIndex = 0;
6559
6560 /* if entire list searched then no frame available */
6561 if ( EndIndex == StartIndex ) {
6562 /* If this occurs then something bad happened,
6563 * all buffers have been 'used' but none mark
6564 * the end of a frame. Reset buffers and receiver.
6565 */
6566
6567 if ( info->rx_enabled ){
6568 spin_lock_irqsave(&info->irq_spinlock,flags);
6569 usc_start_receiver(info);
6570 spin_unlock_irqrestore(&info->irq_spinlock,flags);
6571 }
6572 goto Cleanup;
6573 }
6574 }
6575
6576
6577 /* check status of receive frame */
6578
6579 status = info->rx_buffer_list[EndIndex].status;
6580
6581 if ( status & (RXSTATUS_SHORT_FRAME + RXSTATUS_OVERRUN +
6582 RXSTATUS_CRC_ERROR + RXSTATUS_ABORT) ) {
6583 if ( status & RXSTATUS_SHORT_FRAME )
6584 info->icount.rxshort++;
6585 else if ( status & RXSTATUS_ABORT )
6586 info->icount.rxabort++;
6587 else if ( status & RXSTATUS_OVERRUN )
6588 info->icount.rxover++;
6589 else {
6590 info->icount.rxcrc++;
6591 if ( info->params.crc_type & HDLC_CRC_RETURN_EX )
6592 return_frame = true;
6593 }
6594 framesize = 0;
6595 #if SYNCLINK_GENERIC_HDLC
6596 {
6597 info->netdev->stats.rx_errors++;
6598 info->netdev->stats.rx_frame_errors++;
6599 }
6600 #endif
6601 } else
6602 return_frame = true;
6603
6604 if ( return_frame ) {
6605 /* receive frame has no errors, get frame size.
6606 * The frame size is the starting value of the RCC (which was
6607 * set to 0xffff) minus the ending value of the RCC (decremented
6608 * once for each receive character) minus 2 for the 16-bit CRC.
6609 */
6610
6611 framesize = RCLRVALUE - info->rx_buffer_list[EndIndex].rcc;
6612
6613 /* adjust frame size for CRC if any */
6614 if ( info->params.crc_type == HDLC_CRC_16_CCITT )
6615 framesize -= 2;
6616 else if ( info->params.crc_type == HDLC_CRC_32_CCITT )
6617 framesize -= 4;
6618 }
6619
6620 if ( debug_level >= DEBUG_LEVEL_BH )
6621 printk("%s(%d):mgsl_get_rx_frame(%s) status=%04X size=%d\n",
6622 __FILE__,__LINE__,info->device_name,status,framesize);
6623
6624 if ( debug_level >= DEBUG_LEVEL_DATA )
6625 mgsl_trace_block(info,info->rx_buffer_list[StartIndex].virt_addr,
6626 min_t(int, framesize, DMABUFFERSIZE),0);
6627
6628 if (framesize) {
6629 if ( ( (info->params.crc_type & HDLC_CRC_RETURN_EX) &&
6630 ((framesize+1) > info->max_frame_size) ) ||
6631 (framesize > info->max_frame_size) )
6632 info->icount.rxlong++;
6633 else {
6634 /* copy dma buffer(s) to contiguous intermediate buffer */
6635 int copy_count = framesize;
6636 int index = StartIndex;
6637 unsigned char *ptmp = info->intermediate_rxbuffer;
6638
6639 if ( !(status & RXSTATUS_CRC_ERROR))
6640 info->icount.rxok++;
6641
6642 while(copy_count) {
6643 int partial_count;
6644 if ( copy_count > DMABUFFERSIZE )
6645 partial_count = DMABUFFERSIZE;
6646 else
6647 partial_count = copy_count;
6648
6649 pBufEntry = &(info->rx_buffer_list[index]);
6650 memcpy( ptmp, pBufEntry->virt_addr, partial_count );
6651 ptmp += partial_count;
6652 copy_count -= partial_count;
6653
6654 if ( ++index == info->rx_buffer_count )
6655 index = 0;
6656 }
6657
6658 if ( info->params.crc_type & HDLC_CRC_RETURN_EX ) {
6659 ++framesize;
6660 *ptmp = (status & RXSTATUS_CRC_ERROR ?
6661 RX_CRC_ERROR :
6662 RX_OK);
6663
6664 if ( debug_level >= DEBUG_LEVEL_DATA )
6665 printk("%s(%d):mgsl_get_rx_frame(%s) rx frame status=%d\n",
6666 __FILE__,__LINE__,info->device_name,
6667 *ptmp);
6668 }
6669
6670 #if SYNCLINK_GENERIC_HDLC
6671 if (info->netcount)
6672 hdlcdev_rx(info,info->intermediate_rxbuffer,framesize);
6673 else
6674 #endif
6675 ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize);
6676 }
6677 }
6678 /* Free the buffers used by this frame. */
6679 mgsl_free_rx_frame_buffers( info, StartIndex, EndIndex );
6680
6681 ReturnCode = true;
6682
6683 Cleanup:
6684
6685 if ( info->rx_enabled && info->rx_overflow ) {
6686 /* The receiver needs to restarted because of
6687 * a receive overflow (buffer or FIFO). If the
6688 * receive buffers are now empty, then restart receiver.
6689 */
6690
6691 if ( !info->rx_buffer_list[EndIndex].status &&
6692 info->rx_buffer_list[EndIndex].count ) {
6693 spin_lock_irqsave(&info->irq_spinlock,flags);
6694 usc_start_receiver(info);
6695 spin_unlock_irqrestore(&info->irq_spinlock,flags);
6696 }
6697 }
6698
6699 return ReturnCode;
6700
6701 } /* end of mgsl_get_rx_frame() */
6702
6703 /* mgsl_get_raw_rx_frame()
6704 *
6705 * This function attempts to return a received frame from the
6706 * receive DMA buffers when running in external loop mode. In this mode,
6707 * we will return at most one DMABUFFERSIZE frame to the application.
6708 * The USC receiver is triggering off of DCD going active to start a new
6709 * frame, and DCD going inactive to terminate the frame (similar to
6710 * processing a closing flag character).
6711 *
6712 * In this routine, we will return DMABUFFERSIZE "chunks" at a time.
6713 * If DCD goes inactive, the last Rx DMA Buffer will have a non-zero
6714 * status field and the RCC field will indicate the length of the
6715 * entire received frame. We take this RCC field and get the modulus
6716 * of RCC and DMABUFFERSIZE to determine if number of bytes in the
6717 * last Rx DMA buffer and return that last portion of the frame.
6718 *
6719 * Arguments: info pointer to device extension
6720 * Return Value: true if frame returned, otherwise false
6721 */
6722 static bool mgsl_get_raw_rx_frame(struct mgsl_struct *info)
6723 {
6724 unsigned int CurrentIndex, NextIndex;
6725 unsigned short status;
6726 DMABUFFERENTRY *pBufEntry;
6727 unsigned int framesize = 0;
6728 bool ReturnCode = false;
6729 unsigned long flags;
6730 struct tty_struct *tty = info->port.tty;
6731
6732 /*
6733 * current_rx_buffer points to the 1st buffer of the next available
6734 * receive frame. The status field is set by the 16C32 after
6735 * completing a receive frame. If the status field of this buffer
6736 * is zero, either the USC is still filling this buffer or this
6737 * is one of a series of buffers making up a received frame.
6738 *
6739 * If the count field of this buffer is zero, the USC is either
6740 * using this buffer or has used this buffer. Look at the count
6741 * field of the next buffer. If that next buffer's count is
6742 * non-zero, the USC is still actively using the current buffer.
6743 * Otherwise, if the next buffer's count field is zero, the
6744 * current buffer is complete and the USC is using the next
6745 * buffer.
6746 */
6747 CurrentIndex = NextIndex = info->current_rx_buffer;
6748 ++NextIndex;
6749 if ( NextIndex == info->rx_buffer_count )
6750 NextIndex = 0;
6751
6752 if ( info->rx_buffer_list[CurrentIndex].status != 0 ||
6753 (info->rx_buffer_list[CurrentIndex].count == 0 &&
6754 info->rx_buffer_list[NextIndex].count == 0)) {
6755 /*
6756 * Either the status field of this dma buffer is non-zero
6757 * (indicating the last buffer of a receive frame) or the next
6758 * buffer is marked as in use -- implying this buffer is complete
6759 * and an intermediate buffer for this received frame.
6760 */
6761
6762 status = info->rx_buffer_list[CurrentIndex].status;
6763
6764 if ( status & (RXSTATUS_SHORT_FRAME + RXSTATUS_OVERRUN +
6765 RXSTATUS_CRC_ERROR + RXSTATUS_ABORT) ) {
6766 if ( status & RXSTATUS_SHORT_FRAME )
6767 info->icount.rxshort++;
6768 else if ( status & RXSTATUS_ABORT )
6769 info->icount.rxabort++;
6770 else if ( status & RXSTATUS_OVERRUN )
6771 info->icount.rxover++;
6772 else
6773 info->icount.rxcrc++;
6774 framesize = 0;
6775 } else {
6776 /*
6777 * A receive frame is available, get frame size and status.
6778 *
6779 * The frame size is the starting value of the RCC (which was
6780 * set to 0xffff) minus the ending value of the RCC (decremented
6781 * once for each receive character) minus 2 or 4 for the 16-bit
6782 * or 32-bit CRC.
6783 *
6784 * If the status field is zero, this is an intermediate buffer.
6785 * It's size is 4K.
6786 *
6787 * If the DMA Buffer Entry's Status field is non-zero, the
6788 * receive operation completed normally (ie: DCD dropped). The
6789 * RCC field is valid and holds the received frame size.
6790 * It is possible that the RCC field will be zero on a DMA buffer
6791 * entry with a non-zero status. This can occur if the total
6792 * frame size (number of bytes between the time DCD goes active
6793 * to the time DCD goes inactive) exceeds 65535 bytes. In this
6794 * case the 16C32 has underrun on the RCC count and appears to
6795 * stop updating this counter to let us know the actual received
6796 * frame size. If this happens (non-zero status and zero RCC),
6797 * simply return the entire RxDMA Buffer
6798 */
6799 if ( status ) {
6800 /*
6801 * In the event that the final RxDMA Buffer is
6802 * terminated with a non-zero status and the RCC
6803 * field is zero, we interpret this as the RCC
6804 * having underflowed (received frame > 65535 bytes).
6805 *
6806 * Signal the event to the user by passing back
6807 * a status of RxStatus_CrcError returning the full
6808 * buffer and let the app figure out what data is
6809 * actually valid
6810 */
6811 if ( info->rx_buffer_list[CurrentIndex].rcc )
6812 framesize = RCLRVALUE - info->rx_buffer_list[CurrentIndex].rcc;
6813 else
6814 framesize = DMABUFFERSIZE;
6815 }
6816 else
6817 framesize = DMABUFFERSIZE;
6818 }
6819
6820 if ( framesize > DMABUFFERSIZE ) {
6821 /*
6822 * if running in raw sync mode, ISR handler for
6823 * End Of Buffer events terminates all buffers at 4K.
6824 * If this frame size is said to be >4K, get the
6825 * actual number of bytes of the frame in this buffer.
6826 */
6827 framesize = framesize % DMABUFFERSIZE;
6828 }
6829
6830
6831 if ( debug_level >= DEBUG_LEVEL_BH )
6832 printk("%s(%d):mgsl_get_raw_rx_frame(%s) status=%04X size=%d\n",
6833 __FILE__,__LINE__,info->device_name,status,framesize);
6834
6835 if ( debug_level >= DEBUG_LEVEL_DATA )
6836 mgsl_trace_block(info,info->rx_buffer_list[CurrentIndex].virt_addr,
6837 min_t(int, framesize, DMABUFFERSIZE),0);
6838
6839 if (framesize) {
6840 /* copy dma buffer(s) to contiguous intermediate buffer */
6841 /* NOTE: we never copy more than DMABUFFERSIZE bytes */
6842
6843 pBufEntry = &(info->rx_buffer_list[CurrentIndex]);
6844 memcpy( info->intermediate_rxbuffer, pBufEntry->virt_addr, framesize);
6845 info->icount.rxok++;
6846
6847 ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize);
6848 }
6849
6850 /* Free the buffers used by this frame. */
6851 mgsl_free_rx_frame_buffers( info, CurrentIndex, CurrentIndex );
6852
6853 ReturnCode = true;
6854 }
6855
6856
6857 if ( info->rx_enabled && info->rx_overflow ) {
6858 /* The receiver needs to restarted because of
6859 * a receive overflow (buffer or FIFO). If the
6860 * receive buffers are now empty, then restart receiver.
6861 */
6862
6863 if ( !info->rx_buffer_list[CurrentIndex].status &&
6864 info->rx_buffer_list[CurrentIndex].count ) {
6865 spin_lock_irqsave(&info->irq_spinlock,flags);
6866 usc_start_receiver(info);
6867 spin_unlock_irqrestore(&info->irq_spinlock,flags);
6868 }
6869 }
6870
6871 return ReturnCode;
6872
6873 } /* end of mgsl_get_raw_rx_frame() */
6874
6875 /* mgsl_load_tx_dma_buffer()
6876 *
6877 * Load the transmit DMA buffer with the specified data.
6878 *
6879 * Arguments:
6880 *
6881 * info pointer to device extension
6882 * Buffer pointer to buffer containing frame to load
6883 * BufferSize size in bytes of frame in Buffer
6884 *
6885 * Return Value: None
6886 */
6887 static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info,
6888 const char *Buffer, unsigned int BufferSize)
6889 {
6890 unsigned short Copycount;
6891 unsigned int i = 0;
6892 DMABUFFERENTRY *pBufEntry;
6893
6894 if ( debug_level >= DEBUG_LEVEL_DATA )
6895 mgsl_trace_block(info,Buffer, min_t(int, BufferSize, DMABUFFERSIZE), 1);
6896
6897 if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
6898 /* set CMR:13 to start transmit when
6899 * next GoAhead (abort) is received
6900 */
6901 info->cmr_value |= BIT13;
6902 }
6903
6904 /* begin loading the frame in the next available tx dma
6905 * buffer, remember it's starting location for setting
6906 * up tx dma operation
6907 */
6908 i = info->current_tx_buffer;
6909 info->start_tx_dma_buffer = i;
6910
6911 /* Setup the status and RCC (Frame Size) fields of the 1st */
6912 /* buffer entry in the transmit DMA buffer list. */
6913
6914 info->tx_buffer_list[i].status = info->cmr_value & 0xf000;
6915 info->tx_buffer_list[i].rcc = BufferSize;
6916 info->tx_buffer_list[i].count = BufferSize;
6917
6918 /* Copy frame data from 1st source buffer to the DMA buffers. */
6919 /* The frame data may span multiple DMA buffers. */
6920
6921 while( BufferSize ){
6922 /* Get a pointer to next DMA buffer entry. */
6923 pBufEntry = &info->tx_buffer_list[i++];
6924
6925 if ( i == info->tx_buffer_count )
6926 i=0;
6927
6928 /* Calculate the number of bytes that can be copied from */
6929 /* the source buffer to this DMA buffer. */
6930 if ( BufferSize > DMABUFFERSIZE )
6931 Copycount = DMABUFFERSIZE;
6932 else
6933 Copycount = BufferSize;
6934
6935 /* Actually copy data from source buffer to DMA buffer. */
6936 /* Also set the data count for this individual DMA buffer. */
6937 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
6938 mgsl_load_pci_memory(pBufEntry->virt_addr, Buffer,Copycount);
6939 else
6940 memcpy(pBufEntry->virt_addr, Buffer, Copycount);
6941
6942 pBufEntry->count = Copycount;
6943
6944 /* Advance source pointer and reduce remaining data count. */
6945 Buffer += Copycount;
6946 BufferSize -= Copycount;
6947
6948 ++info->tx_dma_buffers_used;
6949 }
6950
6951 /* remember next available tx dma buffer */
6952 info->current_tx_buffer = i;
6953
6954 } /* end of mgsl_load_tx_dma_buffer() */
6955
6956 /*
6957 * mgsl_register_test()
6958 *
6959 * Performs a register test of the 16C32.
6960 *
6961 * Arguments: info pointer to device instance data
6962 * Return Value: true if test passed, otherwise false
6963 */
6964 static bool mgsl_register_test( struct mgsl_struct *info )
6965 {
6966 static unsigned short BitPatterns[] =
6967 { 0x0000, 0xffff, 0xaaaa, 0x5555, 0x1234, 0x6969, 0x9696, 0x0f0f };
6968 static unsigned int Patterncount = ARRAY_SIZE(BitPatterns);
6969 unsigned int i;
6970 bool rc = true;
6971 unsigned long flags;
6972
6973 spin_lock_irqsave(&info->irq_spinlock,flags);
6974 usc_reset(info);
6975
6976 /* Verify the reset state of some registers. */
6977
6978 if ( (usc_InReg( info, SICR ) != 0) ||
6979 (usc_InReg( info, IVR ) != 0) ||
6980 (usc_InDmaReg( info, DIVR ) != 0) ){
6981 rc = false;
6982 }
6983
6984 if ( rc ){
6985 /* Write bit patterns to various registers but do it out of */
6986 /* sync, then read back and verify values. */
6987
6988 for ( i = 0 ; i < Patterncount ; i++ ) {
6989 usc_OutReg( info, TC0R, BitPatterns[i] );
6990 usc_OutReg( info, TC1R, BitPatterns[(i+1)%Patterncount] );
6991 usc_OutReg( info, TCLR, BitPatterns[(i+2)%Patterncount] );
6992 usc_OutReg( info, RCLR, BitPatterns[(i+3)%Patterncount] );
6993 usc_OutReg( info, RSR, BitPatterns[(i+4)%Patterncount] );
6994 usc_OutDmaReg( info, TBCR, BitPatterns[(i+5)%Patterncount] );
6995
6996 if ( (usc_InReg( info, TC0R ) != BitPatterns[i]) ||
6997 (usc_InReg( info, TC1R ) != BitPatterns[(i+1)%Patterncount]) ||
6998 (usc_InReg( info, TCLR ) != BitPatterns[(i+2)%Patterncount]) ||
6999 (usc_InReg( info, RCLR ) != BitPatterns[(i+3)%Patterncount]) ||
7000 (usc_InReg( info, RSR ) != BitPatterns[(i+4)%Patterncount]) ||
7001 (usc_InDmaReg( info, TBCR ) != BitPatterns[(i+5)%Patterncount]) ){
7002 rc = false;
7003 break;
7004 }
7005 }
7006 }
7007
7008 usc_reset(info);
7009 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7010
7011 return rc;
7012
7013 } /* end of mgsl_register_test() */
7014
7015 /* mgsl_irq_test() Perform interrupt test of the 16C32.
7016 *
7017 * Arguments: info pointer to device instance data
7018 * Return Value: true if test passed, otherwise false
7019 */
7020 static bool mgsl_irq_test( struct mgsl_struct *info )
7021 {
7022 unsigned long EndTime;
7023 unsigned long flags;
7024
7025 spin_lock_irqsave(&info->irq_spinlock,flags);
7026 usc_reset(info);
7027
7028 /*
7029 * Setup 16C32 to interrupt on TxC pin (14MHz clock) transition.
7030 * The ISR sets irq_occurred to true.
7031 */
7032
7033 info->irq_occurred = false;
7034
7035 /* Enable INTEN gate for ISA adapter (Port 6, Bit12) */
7036 /* Enable INTEN (Port 6, Bit12) */
7037 /* This connects the IRQ request signal to the ISA bus */
7038 /* on the ISA adapter. This has no effect for the PCI adapter */
7039 usc_OutReg( info, PCR, (unsigned short)((usc_InReg(info, PCR) | BIT13) & ~BIT12) );
7040
7041 usc_EnableMasterIrqBit(info);
7042 usc_EnableInterrupts(info, IO_PIN);
7043 usc_ClearIrqPendingBits(info, IO_PIN);
7044
7045 usc_UnlatchIostatusBits(info, MISCSTATUS_TXC_LATCHED);
7046 usc_EnableStatusIrqs(info, SICR_TXC_ACTIVE + SICR_TXC_INACTIVE);
7047
7048 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7049
7050 EndTime=100;
7051 while( EndTime-- && !info->irq_occurred ) {
7052 msleep_interruptible(10);
7053 }
7054
7055 spin_lock_irqsave(&info->irq_spinlock,flags);
7056 usc_reset(info);
7057 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7058
7059 return info->irq_occurred;
7060
7061 } /* end of mgsl_irq_test() */
7062
7063 /* mgsl_dma_test()
7064 *
7065 * Perform a DMA test of the 16C32. A small frame is
7066 * transmitted via DMA from a transmit buffer to a receive buffer
7067 * using single buffer DMA mode.
7068 *
7069 * Arguments: info pointer to device instance data
7070 * Return Value: true if test passed, otherwise false
7071 */
7072 static bool mgsl_dma_test( struct mgsl_struct *info )
7073 {
7074 unsigned short FifoLevel;
7075 unsigned long phys_addr;
7076 unsigned int FrameSize;
7077 unsigned int i;
7078 char *TmpPtr;
7079 bool rc = true;
7080 unsigned short status=0;
7081 unsigned long EndTime;
7082 unsigned long flags;
7083 MGSL_PARAMS tmp_params;
7084
7085 /* save current port options */
7086 memcpy(&tmp_params,&info->params,sizeof(MGSL_PARAMS));
7087 /* load default port options */
7088 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
7089
7090 #define TESTFRAMESIZE 40
7091
7092 spin_lock_irqsave(&info->irq_spinlock,flags);
7093
7094 /* setup 16C32 for SDLC DMA transfer mode */
7095
7096 usc_reset(info);
7097 usc_set_sdlc_mode(info);
7098 usc_enable_loopback(info,1);
7099
7100 /* Reprogram the RDMR so that the 16C32 does NOT clear the count
7101 * field of the buffer entry after fetching buffer address. This
7102 * way we can detect a DMA failure for a DMA read (which should be
7103 * non-destructive to system memory) before we try and write to
7104 * memory (where a failure could corrupt system memory).
7105 */
7106
7107 /* Receive DMA mode Register (RDMR)
7108 *
7109 * <15..14> 11 DMA mode = Linked List Buffer mode
7110 * <13> 1 RSBinA/L = store Rx status Block in List entry
7111 * <12> 0 1 = Clear count of List Entry after fetching
7112 * <11..10> 00 Address mode = Increment
7113 * <9> 1 Terminate Buffer on RxBound
7114 * <8> 0 Bus Width = 16bits
7115 * <7..0> ? status Bits (write as 0s)
7116 *
7117 * 1110 0010 0000 0000 = 0xe200
7118 */
7119
7120 usc_OutDmaReg( info, RDMR, 0xe200 );
7121
7122 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7123
7124
7125 /* SETUP TRANSMIT AND RECEIVE DMA BUFFERS */
7126
7127 FrameSize = TESTFRAMESIZE;
7128
7129 /* setup 1st transmit buffer entry: */
7130 /* with frame size and transmit control word */
7131
7132 info->tx_buffer_list[0].count = FrameSize;
7133 info->tx_buffer_list[0].rcc = FrameSize;
7134 info->tx_buffer_list[0].status = 0x4000;
7135
7136 /* build a transmit frame in 1st transmit DMA buffer */
7137
7138 TmpPtr = info->tx_buffer_list[0].virt_addr;
7139 for (i = 0; i < FrameSize; i++ )
7140 *TmpPtr++ = i;
7141
7142 /* setup 1st receive buffer entry: */
7143 /* clear status, set max receive buffer size */
7144
7145 info->rx_buffer_list[0].status = 0;
7146 info->rx_buffer_list[0].count = FrameSize + 4;
7147
7148 /* zero out the 1st receive buffer */
7149
7150 memset( info->rx_buffer_list[0].virt_addr, 0, FrameSize + 4 );
7151
7152 /* Set count field of next buffer entries to prevent */
7153 /* 16C32 from using buffers after the 1st one. */
7154
7155 info->tx_buffer_list[1].count = 0;
7156 info->rx_buffer_list[1].count = 0;
7157
7158
7159 /***************************/
7160 /* Program 16C32 receiver. */
7161 /***************************/
7162
7163 spin_lock_irqsave(&info->irq_spinlock,flags);
7164
7165 /* setup DMA transfers */
7166 usc_RTCmd( info, RTCmd_PurgeRxFifo );
7167
7168 /* program 16C32 receiver with physical address of 1st DMA buffer entry */
7169 phys_addr = info->rx_buffer_list[0].phys_entry;
7170 usc_OutDmaReg( info, NRARL, (unsigned short)phys_addr );
7171 usc_OutDmaReg( info, NRARU, (unsigned short)(phys_addr >> 16) );
7172
7173 /* Clear the Rx DMA status bits (read RDMR) and start channel */
7174 usc_InDmaReg( info, RDMR );
7175 usc_DmaCmd( info, DmaCmd_InitRxChannel );
7176
7177 /* Enable Receiver (RMR <1..0> = 10) */
7178 usc_OutReg( info, RMR, (unsigned short)((usc_InReg(info, RMR) & 0xfffc) | 0x0002) );
7179
7180 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7181
7182
7183 /*************************************************************/
7184 /* WAIT FOR RECEIVER TO DMA ALL PARAMETERS FROM BUFFER ENTRY */
7185 /*************************************************************/
7186
7187 /* Wait 100ms for interrupt. */
7188 EndTime = jiffies + msecs_to_jiffies(100);
7189
7190 for(;;) {
7191 if (time_after(jiffies, EndTime)) {
7192 rc = false;
7193 break;
7194 }
7195
7196 spin_lock_irqsave(&info->irq_spinlock,flags);
7197 status = usc_InDmaReg( info, RDMR );
7198 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7199
7200 if ( !(status & BIT4) && (status & BIT5) ) {
7201 /* INITG (BIT 4) is inactive (no entry read in progress) AND */
7202 /* BUSY (BIT 5) is active (channel still active). */
7203 /* This means the buffer entry read has completed. */
7204 break;
7205 }
7206 }
7207
7208
7209 /******************************/
7210 /* Program 16C32 transmitter. */
7211 /******************************/
7212
7213 spin_lock_irqsave(&info->irq_spinlock,flags);
7214
7215 /* Program the Transmit Character Length Register (TCLR) */
7216 /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
7217
7218 usc_OutReg( info, TCLR, (unsigned short)info->tx_buffer_list[0].count );
7219 usc_RTCmd( info, RTCmd_PurgeTxFifo );
7220
7221 /* Program the address of the 1st DMA Buffer Entry in linked list */
7222
7223 phys_addr = info->tx_buffer_list[0].phys_entry;
7224 usc_OutDmaReg( info, NTARL, (unsigned short)phys_addr );
7225 usc_OutDmaReg( info, NTARU, (unsigned short)(phys_addr >> 16) );
7226
7227 /* unlatch Tx status bits, and start transmit channel. */
7228
7229 usc_OutReg( info, TCSR, (unsigned short)(( usc_InReg(info, TCSR) & 0x0f00) | 0xfa) );
7230 usc_DmaCmd( info, DmaCmd_InitTxChannel );
7231
7232 /* wait for DMA controller to fill transmit FIFO */
7233
7234 usc_TCmd( info, TCmd_SelectTicrTxFifostatus );
7235
7236 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7237
7238
7239 /**********************************/
7240 /* WAIT FOR TRANSMIT FIFO TO FILL */
7241 /**********************************/
7242
7243 /* Wait 100ms */
7244 EndTime = jiffies + msecs_to_jiffies(100);
7245
7246 for(;;) {
7247 if (time_after(jiffies, EndTime)) {
7248 rc = false;
7249 break;
7250 }
7251
7252 spin_lock_irqsave(&info->irq_spinlock,flags);
7253 FifoLevel = usc_InReg(info, TICR) >> 8;
7254 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7255
7256 if ( FifoLevel < 16 )
7257 break;
7258 else
7259 if ( FrameSize < 32 ) {
7260 /* This frame is smaller than the entire transmit FIFO */
7261 /* so wait for the entire frame to be loaded. */
7262 if ( FifoLevel <= (32 - FrameSize) )
7263 break;
7264 }
7265 }
7266
7267
7268 if ( rc )
7269 {
7270 /* Enable 16C32 transmitter. */
7271
7272 spin_lock_irqsave(&info->irq_spinlock,flags);
7273
7274 /* Transmit mode Register (TMR), <1..0> = 10, Enable Transmitter */
7275 usc_TCmd( info, TCmd_SendFrame );
7276 usc_OutReg( info, TMR, (unsigned short)((usc_InReg(info, TMR) & 0xfffc) | 0x0002) );
7277
7278 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7279
7280
7281 /******************************/
7282 /* WAIT FOR TRANSMIT COMPLETE */
7283 /******************************/
7284
7285 /* Wait 100ms */
7286 EndTime = jiffies + msecs_to_jiffies(100);
7287
7288 /* While timer not expired wait for transmit complete */
7289
7290 spin_lock_irqsave(&info->irq_spinlock,flags);
7291 status = usc_InReg( info, TCSR );
7292 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7293
7294 while ( !(status & (BIT6+BIT5+BIT4+BIT2+BIT1)) ) {
7295 if (time_after(jiffies, EndTime)) {
7296 rc = false;
7297 break;
7298 }
7299
7300 spin_lock_irqsave(&info->irq_spinlock,flags);
7301 status = usc_InReg( info, TCSR );
7302 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7303 }
7304 }
7305
7306
7307 if ( rc ){
7308 /* CHECK FOR TRANSMIT ERRORS */
7309 if ( status & (BIT5 + BIT1) )
7310 rc = false;
7311 }
7312
7313 if ( rc ) {
7314 /* WAIT FOR RECEIVE COMPLETE */
7315
7316 /* Wait 100ms */
7317 EndTime = jiffies + msecs_to_jiffies(100);
7318
7319 /* Wait for 16C32 to write receive status to buffer entry. */
7320 status=info->rx_buffer_list[0].status;
7321 while ( status == 0 ) {
7322 if (time_after(jiffies, EndTime)) {
7323 rc = false;
7324 break;
7325 }
7326 status=info->rx_buffer_list[0].status;
7327 }
7328 }
7329
7330
7331 if ( rc ) {
7332 /* CHECK FOR RECEIVE ERRORS */
7333 status = info->rx_buffer_list[0].status;
7334
7335 if ( status & (BIT8 + BIT3 + BIT1) ) {
7336 /* receive error has occurred */
7337 rc = false;
7338 } else {
7339 if ( memcmp( info->tx_buffer_list[0].virt_addr ,
7340 info->rx_buffer_list[0].virt_addr, FrameSize ) ){
7341 rc = false;
7342 }
7343 }
7344 }
7345
7346 spin_lock_irqsave(&info->irq_spinlock,flags);
7347 usc_reset( info );
7348 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7349
7350 /* restore current port options */
7351 memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
7352
7353 return rc;
7354
7355 } /* end of mgsl_dma_test() */
7356
7357 /* mgsl_adapter_test()
7358 *
7359 * Perform the register, IRQ, and DMA tests for the 16C32.
7360 *
7361 * Arguments: info pointer to device instance data
7362 * Return Value: 0 if success, otherwise -ENODEV
7363 */
7364 static int mgsl_adapter_test( struct mgsl_struct *info )
7365 {
7366 if ( debug_level >= DEBUG_LEVEL_INFO )
7367 printk( "%s(%d):Testing device %s\n",
7368 __FILE__,__LINE__,info->device_name );
7369
7370 if ( !mgsl_register_test( info ) ) {
7371 info->init_error = DiagStatus_AddressFailure;
7372 printk( "%s(%d):Register test failure for device %s Addr=%04X\n",
7373 __FILE__,__LINE__,info->device_name, (unsigned short)(info->io_base) );
7374 return -ENODEV;
7375 }
7376
7377 if ( !mgsl_irq_test( info ) ) {
7378 info->init_error = DiagStatus_IrqFailure;
7379 printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
7380 __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
7381 return -ENODEV;
7382 }
7383
7384 if ( !mgsl_dma_test( info ) ) {
7385 info->init_error = DiagStatus_DmaFailure;
7386 printk( "%s(%d):DMA test failure for device %s DMA=%d\n",
7387 __FILE__,__LINE__,info->device_name, (unsigned short)(info->dma_level) );
7388 return -ENODEV;
7389 }
7390
7391 if ( debug_level >= DEBUG_LEVEL_INFO )
7392 printk( "%s(%d):device %s passed diagnostics\n",
7393 __FILE__,__LINE__,info->device_name );
7394
7395 return 0;
7396
7397 } /* end of mgsl_adapter_test() */
7398
7399 /* mgsl_memory_test()
7400 *
7401 * Test the shared memory on a PCI adapter.
7402 *
7403 * Arguments: info pointer to device instance data
7404 * Return Value: true if test passed, otherwise false
7405 */
7406 static bool mgsl_memory_test( struct mgsl_struct *info )
7407 {
7408 static unsigned long BitPatterns[] =
7409 { 0x0, 0x55555555, 0xaaaaaaaa, 0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
7410 unsigned long Patterncount = ARRAY_SIZE(BitPatterns);
7411 unsigned long i;
7412 unsigned long TestLimit = SHARED_MEM_ADDRESS_SIZE/sizeof(unsigned long);
7413 unsigned long * TestAddr;
7414
7415 if ( info->bus_type != MGSL_BUS_TYPE_PCI )
7416 return true;
7417
7418 TestAddr = (unsigned long *)info->memory_base;
7419
7420 /* Test data lines with test pattern at one location. */
7421
7422 for ( i = 0 ; i < Patterncount ; i++ ) {
7423 *TestAddr = BitPatterns[i];
7424 if ( *TestAddr != BitPatterns[i] )
7425 return false;
7426 }
7427
7428 /* Test address lines with incrementing pattern over */
7429 /* entire address range. */
7430
7431 for ( i = 0 ; i < TestLimit ; i++ ) {
7432 *TestAddr = i * 4;
7433 TestAddr++;
7434 }
7435
7436 TestAddr = (unsigned long *)info->memory_base;
7437
7438 for ( i = 0 ; i < TestLimit ; i++ ) {
7439 if ( *TestAddr != i * 4 )
7440 return false;
7441 TestAddr++;
7442 }
7443
7444 memset( info->memory_base, 0, SHARED_MEM_ADDRESS_SIZE );
7445
7446 return true;
7447
7448 } /* End Of mgsl_memory_test() */
7449
7450
7451 /* mgsl_load_pci_memory()
7452 *
7453 * Load a large block of data into the PCI shared memory.
7454 * Use this instead of memcpy() or memmove() to move data
7455 * into the PCI shared memory.
7456 *
7457 * Notes:
7458 *
7459 * This function prevents the PCI9050 interface chip from hogging
7460 * the adapter local bus, which can starve the 16C32 by preventing
7461 * 16C32 bus master cycles.
7462 *
7463 * The PCI9050 documentation says that the 9050 will always release
7464 * control of the local bus after completing the current read
7465 * or write operation.
7466 *
7467 * It appears that as long as the PCI9050 write FIFO is full, the
7468 * PCI9050 treats all of the writes as a single burst transaction
7469 * and will not release the bus. This causes DMA latency problems
7470 * at high speeds when copying large data blocks to the shared
7471 * memory.
7472 *
7473 * This function in effect, breaks the a large shared memory write
7474 * into multiple transations by interleaving a shared memory read
7475 * which will flush the write FIFO and 'complete' the write
7476 * transation. This allows any pending DMA request to gain control
7477 * of the local bus in a timely fasion.
7478 *
7479 * Arguments:
7480 *
7481 * TargetPtr pointer to target address in PCI shared memory
7482 * SourcePtr pointer to source buffer for data
7483 * count count in bytes of data to copy
7484 *
7485 * Return Value: None
7486 */
7487 static void mgsl_load_pci_memory( char* TargetPtr, const char* SourcePtr,
7488 unsigned short count )
7489 {
7490 /* 16 32-bit writes @ 60ns each = 960ns max latency on local bus */
7491 #define PCI_LOAD_INTERVAL 64
7492
7493 unsigned short Intervalcount = count / PCI_LOAD_INTERVAL;
7494 unsigned short Index;
7495 unsigned long Dummy;
7496
7497 for ( Index = 0 ; Index < Intervalcount ; Index++ )
7498 {
7499 memcpy(TargetPtr, SourcePtr, PCI_LOAD_INTERVAL);
7500 Dummy = *((volatile unsigned long *)TargetPtr);
7501 TargetPtr += PCI_LOAD_INTERVAL;
7502 SourcePtr += PCI_LOAD_INTERVAL;
7503 }
7504
7505 memcpy( TargetPtr, SourcePtr, count % PCI_LOAD_INTERVAL );
7506
7507 } /* End Of mgsl_load_pci_memory() */
7508
7509 static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit)
7510 {
7511 int i;
7512 int linecount;
7513 if (xmit)
7514 printk("%s tx data:\n",info->device_name);
7515 else
7516 printk("%s rx data:\n",info->device_name);
7517
7518 while(count) {
7519 if (count > 16)
7520 linecount = 16;
7521 else
7522 linecount = count;
7523
7524 for(i=0;i<linecount;i++)
7525 printk("%02X ",(unsigned char)data[i]);
7526 for(;i<17;i++)
7527 printk(" ");
7528 for(i=0;i<linecount;i++) {
7529 if (data[i]>=040 && data[i]<=0176)
7530 printk("%c",data[i]);
7531 else
7532 printk(".");
7533 }
7534 printk("\n");
7535
7536 data += linecount;
7537 count -= linecount;
7538 }
7539 } /* end of mgsl_trace_block() */
7540
7541 /* mgsl_tx_timeout()
7542 *
7543 * called when HDLC frame times out
7544 * update stats and do tx completion processing
7545 *
7546 * Arguments: context pointer to device instance data
7547 * Return Value: None
7548 */
7549 static void mgsl_tx_timeout(unsigned long context)
7550 {
7551 struct mgsl_struct *info = (struct mgsl_struct*)context;
7552 unsigned long flags;
7553
7554 if ( debug_level >= DEBUG_LEVEL_INFO )
7555 printk( "%s(%d):mgsl_tx_timeout(%s)\n",
7556 __FILE__,__LINE__,info->device_name);
7557 if(info->tx_active &&
7558 (info->params.mode == MGSL_MODE_HDLC ||
7559 info->params.mode == MGSL_MODE_RAW) ) {
7560 info->icount.txtimeout++;
7561 }
7562 spin_lock_irqsave(&info->irq_spinlock,flags);
7563 info->tx_active = false;
7564 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
7565
7566 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
7567 usc_loopmode_cancel_transmit( info );
7568
7569 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7570
7571 #if SYNCLINK_GENERIC_HDLC
7572 if (info->netcount)
7573 hdlcdev_tx_done(info);
7574 else
7575 #endif
7576 mgsl_bh_transmit(info);
7577
7578 } /* end of mgsl_tx_timeout() */
7579
7580 /* signal that there are no more frames to send, so that
7581 * line is 'released' by echoing RxD to TxD when current
7582 * transmission is complete (or immediately if no tx in progress).
7583 */
7584 static int mgsl_loopmode_send_done( struct mgsl_struct * info )
7585 {
7586 unsigned long flags;
7587
7588 spin_lock_irqsave(&info->irq_spinlock,flags);
7589 if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
7590 if (info->tx_active)
7591 info->loopmode_send_done_requested = true;
7592 else
7593 usc_loopmode_send_done(info);
7594 }
7595 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7596
7597 return 0;
7598 }
7599
7600 /* release the line by echoing RxD to TxD
7601 * upon completion of a transmit frame
7602 */
7603 static void usc_loopmode_send_done( struct mgsl_struct * info )
7604 {
7605 info->loopmode_send_done_requested = false;
7606 /* clear CMR:13 to 0 to start echoing RxData to TxData */
7607 info->cmr_value &= ~BIT13;
7608 usc_OutReg(info, CMR, info->cmr_value);
7609 }
7610
7611 /* abort a transmit in progress while in HDLC LoopMode
7612 */
7613 static void usc_loopmode_cancel_transmit( struct mgsl_struct * info )
7614 {
7615 /* reset tx dma channel and purge TxFifo */
7616 usc_RTCmd( info, RTCmd_PurgeTxFifo );
7617 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
7618 usc_loopmode_send_done( info );
7619 }
7620
7621 /* for HDLC/SDLC LoopMode, setting CMR:13 after the transmitter is enabled
7622 * is an Insert Into Loop action. Upon receipt of a GoAhead sequence (RxAbort)
7623 * we must clear CMR:13 to begin repeating TxData to RxData
7624 */
7625 static void usc_loopmode_insert_request( struct mgsl_struct * info )
7626 {
7627 info->loopmode_insert_requested = true;
7628
7629 /* enable RxAbort irq. On next RxAbort, clear CMR:13 to
7630 * begin repeating TxData on RxData (complete insertion)
7631 */
7632 usc_OutReg( info, RICR,
7633 (usc_InReg( info, RICR ) | RXSTATUS_ABORT_RECEIVED ) );
7634
7635 /* set CMR:13 to insert into loop on next GoAhead (RxAbort) */
7636 info->cmr_value |= BIT13;
7637 usc_OutReg(info, CMR, info->cmr_value);
7638 }
7639
7640 /* return 1 if station is inserted into the loop, otherwise 0
7641 */
7642 static int usc_loopmode_active( struct mgsl_struct * info)
7643 {
7644 return usc_InReg( info, CCSR ) & BIT7 ? 1 : 0 ;
7645 }
7646
7647 #if SYNCLINK_GENERIC_HDLC
7648
7649 /**
7650 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
7651 * set encoding and frame check sequence (FCS) options
7652 *
7653 * dev pointer to network device structure
7654 * encoding serial encoding setting
7655 * parity FCS setting
7656 *
7657 * returns 0 if success, otherwise error code
7658 */
7659 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
7660 unsigned short parity)
7661 {
7662 struct mgsl_struct *info = dev_to_port(dev);
7663 unsigned char new_encoding;
7664 unsigned short new_crctype;
7665
7666 /* return error if TTY interface open */
7667 if (info->port.count)
7668 return -EBUSY;
7669
7670 switch (encoding)
7671 {
7672 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
7673 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
7674 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
7675 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
7676 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
7677 default: return -EINVAL;
7678 }
7679
7680 switch (parity)
7681 {
7682 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
7683 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
7684 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
7685 default: return -EINVAL;
7686 }
7687
7688 info->params.encoding = new_encoding;
7689 info->params.crc_type = new_crctype;
7690
7691 /* if network interface up, reprogram hardware */
7692 if (info->netcount)
7693 mgsl_program_hw(info);
7694
7695 return 0;
7696 }
7697
7698 /**
7699 * called by generic HDLC layer to send frame
7700 *
7701 * skb socket buffer containing HDLC frame
7702 * dev pointer to network device structure
7703 */
7704 static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
7705 struct net_device *dev)
7706 {
7707 struct mgsl_struct *info = dev_to_port(dev);
7708 unsigned long flags;
7709
7710 if (debug_level >= DEBUG_LEVEL_INFO)
7711 printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
7712
7713 /* stop sending until this frame completes */
7714 netif_stop_queue(dev);
7715
7716 /* copy data to device buffers */
7717 info->xmit_cnt = skb->len;
7718 mgsl_load_tx_dma_buffer(info, skb->data, skb->len);
7719
7720 /* update network statistics */
7721 dev->stats.tx_packets++;
7722 dev->stats.tx_bytes += skb->len;
7723
7724 /* done with socket buffer, so free it */
7725 dev_kfree_skb(skb);
7726
7727 /* save start time for transmit timeout detection */
7728 dev->trans_start = jiffies;
7729
7730 /* start hardware transmitter if necessary */
7731 spin_lock_irqsave(&info->irq_spinlock,flags);
7732 if (!info->tx_active)
7733 usc_start_transmitter(info);
7734 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7735
7736 return NETDEV_TX_OK;
7737 }
7738
7739 /**
7740 * called by network layer when interface enabled
7741 * claim resources and initialize hardware
7742 *
7743 * dev pointer to network device structure
7744 *
7745 * returns 0 if success, otherwise error code
7746 */
7747 static int hdlcdev_open(struct net_device *dev)
7748 {
7749 struct mgsl_struct *info = dev_to_port(dev);
7750 int rc;
7751 unsigned long flags;
7752
7753 if (debug_level >= DEBUG_LEVEL_INFO)
7754 printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
7755
7756 /* generic HDLC layer open processing */
7757 if ((rc = hdlc_open(dev)))
7758 return rc;
7759
7760 /* arbitrate between network and tty opens */
7761 spin_lock_irqsave(&info->netlock, flags);
7762 if (info->port.count != 0 || info->netcount != 0) {
7763 printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
7764 spin_unlock_irqrestore(&info->netlock, flags);
7765 return -EBUSY;
7766 }
7767 info->netcount=1;
7768 spin_unlock_irqrestore(&info->netlock, flags);
7769
7770 /* claim resources and init adapter */
7771 if ((rc = startup(info)) != 0) {
7772 spin_lock_irqsave(&info->netlock, flags);
7773 info->netcount=0;
7774 spin_unlock_irqrestore(&info->netlock, flags);
7775 return rc;
7776 }
7777
7778 /* assert DTR and RTS, apply hardware settings */
7779 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
7780 mgsl_program_hw(info);
7781
7782 /* enable network layer transmit */
7783 dev->trans_start = jiffies;
7784 netif_start_queue(dev);
7785
7786 /* inform generic HDLC layer of current DCD status */
7787 spin_lock_irqsave(&info->irq_spinlock, flags);
7788 usc_get_serial_signals(info);
7789 spin_unlock_irqrestore(&info->irq_spinlock, flags);
7790 if (info->serial_signals & SerialSignal_DCD)
7791 netif_carrier_on(dev);
7792 else
7793 netif_carrier_off(dev);
7794 return 0;
7795 }
7796
7797 /**
7798 * called by network layer when interface is disabled
7799 * shutdown hardware and release resources
7800 *
7801 * dev pointer to network device structure
7802 *
7803 * returns 0 if success, otherwise error code
7804 */
7805 static int hdlcdev_close(struct net_device *dev)
7806 {
7807 struct mgsl_struct *info = dev_to_port(dev);
7808 unsigned long flags;
7809
7810 if (debug_level >= DEBUG_LEVEL_INFO)
7811 printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
7812
7813 netif_stop_queue(dev);
7814
7815 /* shutdown adapter and release resources */
7816 shutdown(info);
7817
7818 hdlc_close(dev);
7819
7820 spin_lock_irqsave(&info->netlock, flags);
7821 info->netcount=0;
7822 spin_unlock_irqrestore(&info->netlock, flags);
7823
7824 return 0;
7825 }
7826
7827 /**
7828 * called by network layer to process IOCTL call to network device
7829 *
7830 * dev pointer to network device structure
7831 * ifr pointer to network interface request structure
7832 * cmd IOCTL command code
7833 *
7834 * returns 0 if success, otherwise error code
7835 */
7836 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
7837 {
7838 const size_t size = sizeof(sync_serial_settings);
7839 sync_serial_settings new_line;
7840 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
7841 struct mgsl_struct *info = dev_to_port(dev);
7842 unsigned int flags;
7843
7844 if (debug_level >= DEBUG_LEVEL_INFO)
7845 printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
7846
7847 /* return error if TTY interface open */
7848 if (info->port.count)
7849 return -EBUSY;
7850
7851 if (cmd != SIOCWANDEV)
7852 return hdlc_ioctl(dev, ifr, cmd);
7853
7854 switch(ifr->ifr_settings.type) {
7855 case IF_GET_IFACE: /* return current sync_serial_settings */
7856
7857 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
7858 if (ifr->ifr_settings.size < size) {
7859 ifr->ifr_settings.size = size; /* data size wanted */
7860 return -ENOBUFS;
7861 }
7862
7863 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
7864 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
7865 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
7866 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
7867
7868 switch (flags){
7869 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
7870 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
7871 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
7872 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
7873 default: new_line.clock_type = CLOCK_DEFAULT;
7874 }
7875
7876 new_line.clock_rate = info->params.clock_speed;
7877 new_line.loopback = info->params.loopback ? 1:0;
7878
7879 if (copy_to_user(line, &new_line, size))
7880 return -EFAULT;
7881 return 0;
7882
7883 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
7884
7885 if(!capable(CAP_NET_ADMIN))
7886 return -EPERM;
7887 if (copy_from_user(&new_line, line, size))
7888 return -EFAULT;
7889
7890 switch (new_line.clock_type)
7891 {
7892 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
7893 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
7894 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
7895 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
7896 case CLOCK_DEFAULT: flags = info->params.flags &
7897 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
7898 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
7899 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
7900 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
7901 default: return -EINVAL;
7902 }
7903
7904 if (new_line.loopback != 0 && new_line.loopback != 1)
7905 return -EINVAL;
7906
7907 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
7908 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
7909 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
7910 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
7911 info->params.flags |= flags;
7912
7913 info->params.loopback = new_line.loopback;
7914
7915 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
7916 info->params.clock_speed = new_line.clock_rate;
7917 else
7918 info->params.clock_speed = 0;
7919
7920 /* if network interface up, reprogram hardware */
7921 if (info->netcount)
7922 mgsl_program_hw(info);
7923 return 0;
7924
7925 default:
7926 return hdlc_ioctl(dev, ifr, cmd);
7927 }
7928 }
7929
7930 /**
7931 * called by network layer when transmit timeout is detected
7932 *
7933 * dev pointer to network device structure
7934 */
7935 static void hdlcdev_tx_timeout(struct net_device *dev)
7936 {
7937 struct mgsl_struct *info = dev_to_port(dev);
7938 unsigned long flags;
7939
7940 if (debug_level >= DEBUG_LEVEL_INFO)
7941 printk("hdlcdev_tx_timeout(%s)\n",dev->name);
7942
7943 dev->stats.tx_errors++;
7944 dev->stats.tx_aborted_errors++;
7945
7946 spin_lock_irqsave(&info->irq_spinlock,flags);
7947 usc_stop_transmitter(info);
7948 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7949
7950 netif_wake_queue(dev);
7951 }
7952
7953 /**
7954 * called by device driver when transmit completes
7955 * reenable network layer transmit if stopped
7956 *
7957 * info pointer to device instance information
7958 */
7959 static void hdlcdev_tx_done(struct mgsl_struct *info)
7960 {
7961 if (netif_queue_stopped(info->netdev))
7962 netif_wake_queue(info->netdev);
7963 }
7964
7965 /**
7966 * called by device driver when frame received
7967 * pass frame to network layer
7968 *
7969 * info pointer to device instance information
7970 * buf pointer to buffer contianing frame data
7971 * size count of data bytes in buf
7972 */
7973 static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size)
7974 {
7975 struct sk_buff *skb = dev_alloc_skb(size);
7976 struct net_device *dev = info->netdev;
7977
7978 if (debug_level >= DEBUG_LEVEL_INFO)
7979 printk("hdlcdev_rx(%s)\n", dev->name);
7980
7981 if (skb == NULL) {
7982 printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n",
7983 dev->name);
7984 dev->stats.rx_dropped++;
7985 return;
7986 }
7987
7988 memcpy(skb_put(skb, size), buf, size);
7989
7990 skb->protocol = hdlc_type_trans(skb, dev);
7991
7992 dev->stats.rx_packets++;
7993 dev->stats.rx_bytes += size;
7994
7995 netif_rx(skb);
7996 }
7997
7998 static const struct net_device_ops hdlcdev_ops = {
7999 .ndo_open = hdlcdev_open,
8000 .ndo_stop = hdlcdev_close,
8001 .ndo_change_mtu = hdlc_change_mtu,
8002 .ndo_start_xmit = hdlc_start_xmit,
8003 .ndo_do_ioctl = hdlcdev_ioctl,
8004 .ndo_tx_timeout = hdlcdev_tx_timeout,
8005 };
8006
8007 /**
8008 * called by device driver when adding device instance
8009 * do generic HDLC initialization
8010 *
8011 * info pointer to device instance information
8012 *
8013 * returns 0 if success, otherwise error code
8014 */
8015 static int hdlcdev_init(struct mgsl_struct *info)
8016 {
8017 int rc;
8018 struct net_device *dev;
8019 hdlc_device *hdlc;
8020
8021 /* allocate and initialize network and HDLC layer objects */
8022
8023 if (!(dev = alloc_hdlcdev(info))) {
8024 printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
8025 return -ENOMEM;
8026 }
8027
8028 /* for network layer reporting purposes only */
8029 dev->base_addr = info->io_base;
8030 dev->irq = info->irq_level;
8031 dev->dma = info->dma_level;
8032
8033 /* network layer callbacks and settings */
8034 dev->netdev_ops = &hdlcdev_ops;
8035 dev->watchdog_timeo = 10 * HZ;
8036 dev->tx_queue_len = 50;
8037
8038 /* generic HDLC layer callbacks and settings */
8039 hdlc = dev_to_hdlc(dev);
8040 hdlc->attach = hdlcdev_attach;
8041 hdlc->xmit = hdlcdev_xmit;
8042
8043 /* register objects with HDLC layer */
8044 if ((rc = register_hdlc_device(dev))) {
8045 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
8046 free_netdev(dev);
8047 return rc;
8048 }
8049
8050 info->netdev = dev;
8051 return 0;
8052 }
8053
8054 /**
8055 * called by device driver when removing device instance
8056 * do generic HDLC cleanup
8057 *
8058 * info pointer to device instance information
8059 */
8060 static void hdlcdev_exit(struct mgsl_struct *info)
8061 {
8062 unregister_hdlc_device(info->netdev);
8063 free_netdev(info->netdev);
8064 info->netdev = NULL;
8065 }
8066
8067 #endif /* CONFIG_HDLC */
8068
8069
8070 static int __devinit synclink_init_one (struct pci_dev *dev,
8071 const struct pci_device_id *ent)
8072 {
8073 struct mgsl_struct *info;
8074
8075 if (pci_enable_device(dev)) {
8076 printk("error enabling pci device %p\n", dev);
8077 return -EIO;
8078 }
8079
8080 if (!(info = mgsl_allocate_device())) {
8081 printk("can't allocate device instance data.\n");
8082 return -EIO;
8083 }
8084
8085 /* Copy user configuration info to device instance data */
8086
8087 info->io_base = pci_resource_start(dev, 2);
8088 info->irq_level = dev->irq;
8089 info->phys_memory_base = pci_resource_start(dev, 3);
8090
8091 /* Because veremap only works on page boundaries we must map
8092 * a larger area than is actually implemented for the LCR
8093 * memory range. We map a full page starting at the page boundary.
8094 */
8095 info->phys_lcr_base = pci_resource_start(dev, 0);
8096 info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1);
8097 info->phys_lcr_base &= ~(PAGE_SIZE-1);
8098
8099 info->bus_type = MGSL_BUS_TYPE_PCI;
8100 info->io_addr_size = 8;
8101 info->irq_flags = IRQF_SHARED;
8102
8103 if (dev->device == 0x0210) {
8104 /* Version 1 PCI9030 based universal PCI adapter */
8105 info->misc_ctrl_value = 0x007c4080;
8106 info->hw_version = 1;
8107 } else {
8108 /* Version 0 PCI9050 based 5V PCI adapter
8109 * A PCI9050 bug prevents reading LCR registers if
8110 * LCR base address bit 7 is set. Maintain shadow
8111 * value so we can write to LCR misc control reg.
8112 */
8113 info->misc_ctrl_value = 0x087e4546;
8114 info->hw_version = 0;
8115 }
8116
8117 mgsl_add_device(info);
8118
8119 return 0;
8120 }
8121
8122 static void __devexit synclink_remove_one (struct pci_dev *dev)
8123 {
8124 }
8125
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree