?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
davinci: DA850/OMAP-L138: add voltage regulation support
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / char / isicom.c
blob426bfdd7f3e0221d07498f7b30c9aab7d6904a48
1 /*
2 * This program is free software; you can redistribute it and/or
3 * modify it under the terms of the GNU General Public License
4 * as published by the Free Software Foundation; either version
5 * 2 of the License, or (at your option) any later version.
6 *
7 * Original driver code supplied by Multi-Tech
8 *
9 * Changes
10 * 1/9/98 alan@lxorguk.ukuu.org.uk
11 * Merge to 2.0.x kernel tree
12 * Obtain and use official major/minors
13 * Loader switched to a misc device
14 * (fixed range check bug as a side effect)
15 * Printk clean up
16 * 9/12/98 alan@lxorguk.ukuu.org.uk
17 * Rough port to 2.1.x
18 *
19 * 10/6/99 sameer Merged the ISA and PCI drivers to
20 * a new unified driver.
21 *
22 * 3/9/99 sameer Added support for ISI4616 cards.
23 *
24 * 16/9/99 sameer We do not force RTS low anymore.
25 * This is to prevent the firmware
26 * from getting confused.
27 *
28 * 26/10/99 sameer Cosmetic changes:The driver now
29 * dumps the Port Count information
30 * along with I/O address and IRQ.
31 *
32 * 13/12/99 sameer Fixed the problem with IRQ sharing.
33 *
34 * 10/5/00 sameer Fixed isicom_shutdown_board()
35 * to not lower DTR on all the ports
36 * when the last port on the card is
37 * closed.
38 *
39 * 10/5/00 sameer Signal mask setup command added
40 * to isicom_setup_port and
41 * isicom_shutdown_port.
42 *
43 * 24/5/00 sameer The driver is now SMP aware.
44 *
45 *
46 * 27/11/00 Vinayak P Risbud Fixed the Driver Crash Problem
47 *
48 *
49 * 03/01/01 anil .s Added support for resetting the
50 * internal modems on ISI cards.
51 *
52 * 08/02/01 anil .s Upgraded the driver for kernel
53 * 2.4.x
54 *
55 * 11/04/01 Kevin Fixed firmware load problem with
56 * ISIHP-4X card
57 *
58 * 30/04/01 anil .s Fixed the remote login through
59 * ISI port problem. Now the link
60 * does not go down before password
61 * prompt.
62 *
63 * 03/05/01 anil .s Fixed the problem with IRQ sharing
64 * among ISI-PCI cards.
65 *
66 * 03/05/01 anil .s Added support to display the version
67 * info during insmod as well as module
68 * listing by lsmod.
69 *
70 * 10/05/01 anil .s Done the modifications to the source
71 * file and Install script so that the
72 * same installation can be used for
73 * 2.2.x and 2.4.x kernel.
74 *
75 * 06/06/01 anil .s Now we drop both dtr and rts during
76 * shutdown_port as well as raise them
77 * during isicom_config_port.
78 *
79 * 09/06/01 acme@conectiva.com.br use capable, not suser, do
80 * restore_flags on failure in
81 * isicom_send_break, verify put_user
82 * result
83 *
84 * 11/02/03 ranjeeth Added support for 230 Kbps and 460 Kbps
85 * Baud index extended to 21
86 *
87 * 20/03/03 ranjeeth Made to work for Linux Advanced server.
88 * Taken care of license warning.
89 *
90 * 10/12/03 Ravindra Made to work for Fedora Core 1 of
91 * Red Hat Distribution
92 *
93 * 06/01/05 Alan Cox Merged the ISI and base kernel strands
94 * into a single 2.6 driver
95 *
96 * ***********************************************************
97 *
98 * To use this driver you also need the support package. You
99 * can find this in RPM format on
100 * ftp://ftp.linux.org.uk/pub/linux/alan
101 *
102 * You can find the original tools for this direct from Multitech
103 * ftp://ftp.multitech.com/ISI-Cards/
104 *
105 * Having installed the cards the module options (/etc/modprobe.conf)
106 *
107 * options isicom io=card1,card2,card3,card4 irq=card1,card2,card3,card4
108 *
109 * Omit those entries for boards you don't have installed.
110 *
111 * TODO
112 * Merge testing
113 * 64-bit verification
114 */
115
116 #include <linux/module.h>
117 #include <linux/firmware.h>
118 #include <linux/kernel.h>
119 #include <linux/tty.h>
120 #include <linux/tty_flip.h>
121 #include <linux/termios.h>
122 #include <linux/fs.h>
123 #include <linux/sched.h>
124 #include <linux/serial.h>
125 #include <linux/smp_lock.h>
126 #include <linux/mm.h>
127 #include <linux/interrupt.h>
128 #include <linux/timer.h>
129 #include <linux/delay.h>
130 #include <linux/ioport.h>
131
132 #include <linux/uaccess.h>
133 #include <linux/io.h>
134 #include <asm/system.h>
135
136 #include <linux/pci.h>
137
138 #include <linux/isicom.h>
139
140 #define InterruptTheCard(base) outw(0, (base) + 0xc)
141 #define ClearInterrupt(base) inw((base) + 0x0a)
142
143 #define pr_dbg(str...) pr_debug("ISICOM: " str)
144 #ifdef DEBUG
145 #define isicom_paranoia_check(a, b, c) __isicom_paranoia_check((a), (b), (c))
146 #else
147 #define isicom_paranoia_check(a, b, c) 0
148 #endif
149
150 static int isicom_probe(struct pci_dev *, const struct pci_device_id *);
151 static void __devexit isicom_remove(struct pci_dev *);
152
153 static struct pci_device_id isicom_pci_tbl[] = {
154 { PCI_DEVICE(VENDOR_ID, 0x2028) },
155 { PCI_DEVICE(VENDOR_ID, 0x2051) },
156 { PCI_DEVICE(VENDOR_ID, 0x2052) },
157 { PCI_DEVICE(VENDOR_ID, 0x2053) },
158 { PCI_DEVICE(VENDOR_ID, 0x2054) },
159 { PCI_DEVICE(VENDOR_ID, 0x2055) },
160 { PCI_DEVICE(VENDOR_ID, 0x2056) },
161 { PCI_DEVICE(VENDOR_ID, 0x2057) },
162 { PCI_DEVICE(VENDOR_ID, 0x2058) },
163 { 0 }
164 };
165 MODULE_DEVICE_TABLE(pci, isicom_pci_tbl);
166
167 static struct pci_driver isicom_driver = {
168 .name = "isicom",
169 .id_table = isicom_pci_tbl,
170 .probe = isicom_probe,
171 .remove = __devexit_p(isicom_remove)
172 };
173
174 static int prev_card = 3; /* start servicing isi_card[0] */
175 static struct tty_driver *isicom_normal;
176
177 static void isicom_tx(unsigned long _data);
178 static void isicom_start(struct tty_struct *tty);
179
180 static DEFINE_TIMER(tx, isicom_tx, 0, 0);
181
182 /* baud index mappings from linux defns to isi */
183
184 static signed char linuxb_to_isib[] = {
185 -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 16, 17, 18, 19, 20, 21
186 };
187
188 struct isi_board {
189 unsigned long base;
190 int irq;
191 unsigned char port_count;
192 unsigned short status;
193 unsigned short port_status; /* each bit for each port */
194 unsigned short shift_count;
195 struct isi_port *ports;
196 signed char count;
197 spinlock_t card_lock; /* Card wide lock 11/5/00 -sameer */
198 unsigned long flags;
199 unsigned int index;
200 };
201
202 struct isi_port {
203 unsigned short magic;
204 struct tty_port port;
205 u16 channel;
206 u16 status;
207 struct isi_board *card;
208 unsigned char *xmit_buf;
209 int xmit_head;
210 int xmit_tail;
211 int xmit_cnt;
212 };
213
214 static struct isi_board isi_card[BOARD_COUNT];
215 static struct isi_port isi_ports[PORT_COUNT];
216
217 /*
218 * Locking functions for card level locking. We need to own both
219 * the kernel lock for the card and have the card in a position that
220 * it wants to talk.
221 */
222
223 static inline int WaitTillCardIsFree(unsigned long base)
224 {
225 unsigned int count = 0;
226 unsigned int a = in_atomic(); /* do we run under spinlock? */
227
228 while (!(inw(base + 0xe) & 0x1) && count++ < 100)
229 if (a)
230 mdelay(1);
231 else
232 msleep(1);
233
234 return !(inw(base + 0xe) & 0x1);
235 }
236
237 static int lock_card(struct isi_board *card)
238 {
239 unsigned long base = card->base;
240 unsigned int retries, a;
241
242 for (retries = 0; retries < 10; retries++) {
243 spin_lock_irqsave(&card->card_lock, card->flags);
244 for (a = 0; a < 10; a++) {
245 if (inw(base + 0xe) & 0x1)
246 return 1;
247 udelay(10);
248 }
249 spin_unlock_irqrestore(&card->card_lock, card->flags);
250 msleep(10);
251 }
252 printk(KERN_WARNING "ISICOM: Failed to lock Card (0x%lx)\n",
253 card->base);
254
255 return 0; /* Failed to acquire the card! */
256 }
257
258 static void unlock_card(struct isi_board *card)
259 {
260 spin_unlock_irqrestore(&card->card_lock, card->flags);
261 }
262
263 /*
264 * ISI Card specific ops ...
265 */
266
267 /* card->lock HAS to be held */
268 static void raise_dtr(struct isi_port *port)
269 {
270 struct isi_board *card = port->card;
271 unsigned long base = card->base;
272 u16 channel = port->channel;
273
274 if (WaitTillCardIsFree(base))
275 return;
276
277 outw(0x8000 | (channel << card->shift_count) | 0x02, base);
278 outw(0x0504, base);
279 InterruptTheCard(base);
280 port->status |= ISI_DTR;
281 }
282
283 /* card->lock HAS to be held */
284 static inline void drop_dtr(struct isi_port *port)
285 {
286 struct isi_board *card = port->card;
287 unsigned long base = card->base;
288 u16 channel = port->channel;
289
290 if (WaitTillCardIsFree(base))
291 return;
292
293 outw(0x8000 | (channel << card->shift_count) | 0x02, base);
294 outw(0x0404, base);
295 InterruptTheCard(base);
296 port->status &= ~ISI_DTR;
297 }
298
299 /* card->lock HAS to be held */
300 static inline void raise_rts(struct isi_port *port)
301 {
302 struct isi_board *card = port->card;
303 unsigned long base = card->base;
304 u16 channel = port->channel;
305
306 if (WaitTillCardIsFree(base))
307 return;
308
309 outw(0x8000 | (channel << card->shift_count) | 0x02, base);
310 outw(0x0a04, base);
311 InterruptTheCard(base);
312 port->status |= ISI_RTS;
313 }
314
315 /* card->lock HAS to be held */
316 static inline void drop_rts(struct isi_port *port)
317 {
318 struct isi_board *card = port->card;
319 unsigned long base = card->base;
320 u16 channel = port->channel;
321
322 if (WaitTillCardIsFree(base))
323 return;
324
325 outw(0x8000 | (channel << card->shift_count) | 0x02, base);
326 outw(0x0804, base);
327 InterruptTheCard(base);
328 port->status &= ~ISI_RTS;
329 }
330
331 /* card->lock MUST NOT be held */
332
333 static void isicom_dtr_rts(struct tty_port *port, int on)
334 {
335 struct isi_port *ip = container_of(port, struct isi_port, port);
336 struct isi_board *card = ip->card;
337 unsigned long base = card->base;
338 u16 channel = ip->channel;
339
340 if (!lock_card(card))
341 return;
342
343 if (on) {
344 outw(0x8000 | (channel << card->shift_count) | 0x02, base);
345 outw(0x0f04, base);
346 InterruptTheCard(base);
347 ip->status |= (ISI_DTR | ISI_RTS);
348 } else {
349 outw(0x8000 | (channel << card->shift_count) | 0x02, base);
350 outw(0x0C04, base);
351 InterruptTheCard(base);
352 ip->status &= ~(ISI_DTR | ISI_RTS);
353 }
354 unlock_card(card);
355 }
356
357 /* card->lock HAS to be held */
358 static void drop_dtr_rts(struct isi_port *port)
359 {
360 struct isi_board *card = port->card;
361 unsigned long base = card->base;
362 u16 channel = port->channel;
363
364 if (WaitTillCardIsFree(base))
365 return;
366
367 outw(0x8000 | (channel << card->shift_count) | 0x02, base);
368 outw(0x0c04, base);
369 InterruptTheCard(base);
370 port->status &= ~(ISI_RTS | ISI_DTR);
371 }
372
373 /*
374 * ISICOM Driver specific routines ...
375 *
376 */
377
378 static inline int __isicom_paranoia_check(struct isi_port const *port,
379 char *name, const char *routine)
380 {
381 if (!port) {
382 printk(KERN_WARNING "ISICOM: Warning: bad isicom magic for "
383 "dev %s in %s.\n", name, routine);
384 return 1;
385 }
386 if (port->magic != ISICOM_MAGIC) {
387 printk(KERN_WARNING "ISICOM: Warning: NULL isicom port for "
388 "dev %s in %s.\n", name, routine);
389 return 1;
390 }
391
392 return 0;
393 }
394
395 /*
396 * Transmitter.
397 *
398 * We shovel data into the card buffers on a regular basis. The card
399 * will do the rest of the work for us.
400 */
401
402 static void isicom_tx(unsigned long _data)
403 {
404 unsigned long flags, base;
405 unsigned int retries;
406 short count = (BOARD_COUNT-1), card;
407 short txcount, wrd, residue, word_count, cnt;
408 struct isi_port *port;
409 struct tty_struct *tty;
410
411 /* find next active board */
412 card = (prev_card + 1) & 0x0003;
413 while (count-- > 0) {
414 if (isi_card[card].status & BOARD_ACTIVE)
415 break;
416 card = (card + 1) & 0x0003;
417 }
418 if (!(isi_card[card].status & BOARD_ACTIVE))
419 goto sched_again;
420
421 prev_card = card;
422
423 count = isi_card[card].port_count;
424 port = isi_card[card].ports;
425 base = isi_card[card].base;
426
427 spin_lock_irqsave(&isi_card[card].card_lock, flags);
428 for (retries = 0; retries < 100; retries++) {
429 if (inw(base + 0xe) & 0x1)
430 break;
431 udelay(2);
432 }
433 if (retries >= 100)
434 goto unlock;
435
436 tty = tty_port_tty_get(&port->port);
437 if (tty == NULL)
438 goto put_unlock;
439
440 for (; count > 0; count--, port++) {
441 /* port not active or tx disabled to force flow control */
442 if (!(port->port.flags & ASYNC_INITIALIZED) ||
443 !(port->status & ISI_TXOK))
444 continue;
445
446 txcount = min_t(short, TX_SIZE, port->xmit_cnt);
447 if (txcount <= 0 || tty->stopped || tty->hw_stopped)
448 continue;
449
450 if (!(inw(base + 0x02) & (1 << port->channel)))
451 continue;
452
453 pr_dbg("txing %d bytes, port%d.\n", txcount,
454 port->channel + 1);
455 outw((port->channel << isi_card[card].shift_count) | txcount,
456 base);
457 residue = NO;
458 wrd = 0;
459 while (1) {
460 cnt = min_t(int, txcount, (SERIAL_XMIT_SIZE
461 - port->xmit_tail));
462 if (residue == YES) {
463 residue = NO;
464 if (cnt > 0) {
465 wrd |= (port->port.xmit_buf[port->xmit_tail]
466 << 8);
467 port->xmit_tail = (port->xmit_tail + 1)
468 & (SERIAL_XMIT_SIZE - 1);
469 port->xmit_cnt--;
470 txcount--;
471 cnt--;
472 outw(wrd, base);
473 } else {
474 outw(wrd, base);
475 break;
476 }
477 }
478 if (cnt <= 0)
479 break;
480 word_count = cnt >> 1;
481 outsw(base, port->port.xmit_buf+port->xmit_tail, word_count);
482 port->xmit_tail = (port->xmit_tail
483 + (word_count << 1)) & (SERIAL_XMIT_SIZE - 1);
484 txcount -= (word_count << 1);
485 port->xmit_cnt -= (word_count << 1);
486 if (cnt & 0x0001) {
487 residue = YES;
488 wrd = port->port.xmit_buf[port->xmit_tail];
489 port->xmit_tail = (port->xmit_tail + 1)
490 & (SERIAL_XMIT_SIZE - 1);
491 port->xmit_cnt--;
492 txcount--;
493 }
494 }
495
496 InterruptTheCard(base);
497 if (port->xmit_cnt <= 0)
498 port->status &= ~ISI_TXOK;
499 if (port->xmit_cnt <= WAKEUP_CHARS)
500 tty_wakeup(tty);
501 }
502
503 put_unlock:
504 tty_kref_put(tty);
505 unlock:
506 spin_unlock_irqrestore(&isi_card[card].card_lock, flags);
507 /* schedule another tx for hopefully in about 10ms */
508 sched_again:
509 mod_timer(&tx, jiffies + msecs_to_jiffies(10));
510 }
511
512 /*
513 * Main interrupt handler routine
514 */
515
516 static irqreturn_t isicom_interrupt(int irq, void *dev_id)
517 {
518 struct isi_board *card = dev_id;
519 struct isi_port *port;
520 struct tty_struct *tty;
521 unsigned long base;
522 u16 header, word_count, count, channel;
523 short byte_count;
524 unsigned char *rp;
525
526 if (!card || !(card->status & FIRMWARE_LOADED))
527 return IRQ_NONE;
528
529 base = card->base;
530
531 /* did the card interrupt us? */
532 if (!(inw(base + 0x0e) & 0x02))
533 return IRQ_NONE;
534
535 spin_lock(&card->card_lock);
536
537 /*
538 * disable any interrupts from the PCI card and lower the
539 * interrupt line
540 */
541 outw(0x8000, base+0x04);
542 ClearInterrupt(base);
543
544 inw(base); /* get the dummy word out */
545 header = inw(base);
546 channel = (header & 0x7800) >> card->shift_count;
547 byte_count = header & 0xff;
548
549 if (channel + 1 > card->port_count) {
550 printk(KERN_WARNING "ISICOM: isicom_interrupt(0x%lx): "
551 "%d(channel) > port_count.\n", base, channel+1);
552 outw(0x0000, base+0x04); /* enable interrupts */
553 spin_unlock(&card->card_lock);
554 return IRQ_HANDLED;
555 }
556 port = card->ports + channel;
557 if (!(port->port.flags & ASYNC_INITIALIZED)) {
558 outw(0x0000, base+0x04); /* enable interrupts */
559 spin_unlock(&card->card_lock);
560 return IRQ_HANDLED;
561 }
562
563 tty = tty_port_tty_get(&port->port);
564 if (tty == NULL) {
565 word_count = byte_count >> 1;
566 while (byte_count > 1) {
567 inw(base);
568 byte_count -= 2;
569 }
570 if (byte_count & 0x01)
571 inw(base);
572 outw(0x0000, base+0x04); /* enable interrupts */
573 spin_unlock(&card->card_lock);
574 return IRQ_HANDLED;
575 }
576
577 if (header & 0x8000) { /* Status Packet */
578 header = inw(base);
579 switch (header & 0xff) {
580 case 0: /* Change in EIA signals */
581 if (port->port.flags & ASYNC_CHECK_CD) {
582 if (port->status & ISI_DCD) {
583 if (!(header & ISI_DCD)) {
584 /* Carrier has been lost */
585 pr_dbg("interrupt: DCD->low.\n"
586 );
587 port->status &= ~ISI_DCD;
588 tty_hangup(tty);
589 }
590 } else if (header & ISI_DCD) {
591 /* Carrier has been detected */
592 pr_dbg("interrupt: DCD->high.\n");
593 port->status |= ISI_DCD;
594 wake_up_interruptible(&port->port.open_wait);
595 }
596 } else {
597 if (header & ISI_DCD)
598 port->status |= ISI_DCD;
599 else
600 port->status &= ~ISI_DCD;
601 }
602
603 if (port->port.flags & ASYNC_CTS_FLOW) {
604 if (tty->hw_stopped) {
605 if (header & ISI_CTS) {
606 port->port.tty->hw_stopped = 0;
607 /* start tx ing */
608 port->status |= (ISI_TXOK
609 | ISI_CTS);
610 tty_wakeup(tty);
611 }
612 } else if (!(header & ISI_CTS)) {
613 tty->hw_stopped = 1;
614 /* stop tx ing */
615 port->status &= ~(ISI_TXOK | ISI_CTS);
616 }
617 } else {
618 if (header & ISI_CTS)
619 port->status |= ISI_CTS;
620 else
621 port->status &= ~ISI_CTS;
622 }
623
624 if (header & ISI_DSR)
625 port->status |= ISI_DSR;
626 else
627 port->status &= ~ISI_DSR;
628
629 if (header & ISI_RI)
630 port->status |= ISI_RI;
631 else
632 port->status &= ~ISI_RI;
633
634 break;
635
636 case 1: /* Received Break !!! */
637 tty_insert_flip_char(tty, 0, TTY_BREAK);
638 if (port->port.flags & ASYNC_SAK)
639 do_SAK(tty);
640 tty_flip_buffer_push(tty);
641 break;
642
643 case 2: /* Statistics */
644 pr_dbg("isicom_interrupt: stats!!!.\n");
645 break;
646
647 default:
648 pr_dbg("Intr: Unknown code in status packet.\n");
649 break;
650 }
651 } else { /* Data Packet */
652
653 count = tty_prepare_flip_string(tty, &rp, byte_count & ~1);
654 pr_dbg("Intr: Can rx %d of %d bytes.\n", count, byte_count);
655 word_count = count >> 1;
656 insw(base, rp, word_count);
657 byte_count -= (word_count << 1);
658 if (count & 0x0001) {
659 tty_insert_flip_char(tty, inw(base) & 0xff,
660 TTY_NORMAL);
661 byte_count -= 2;
662 }
663 if (byte_count > 0) {
664 pr_dbg("Intr(0x%lx:%d): Flip buffer overflow! dropping "
665 "bytes...\n", base, channel + 1);
666 /* drain out unread xtra data */
667 while (byte_count > 0) {
668 inw(base);
669 byte_count -= 2;
670 }
671 }
672 tty_flip_buffer_push(tty);
673 }
674 outw(0x0000, base+0x04); /* enable interrupts */
675 spin_unlock(&card->card_lock);
676 tty_kref_put(tty);
677
678 return IRQ_HANDLED;
679 }
680
681 static void isicom_config_port(struct tty_struct *tty)
682 {
683 struct isi_port *port = tty->driver_data;
684 struct isi_board *card = port->card;
685 unsigned long baud;
686 unsigned long base = card->base;
687 u16 channel_setup, channel = port->channel,
688 shift_count = card->shift_count;
689 unsigned char flow_ctrl;
690
691 /* FIXME: Switch to new tty baud API */
692 baud = C_BAUD(tty);
693 if (baud & CBAUDEX) {
694 baud &= ~CBAUDEX;
695
696 /* if CBAUDEX bit is on and the baud is set to either 50 or 75
697 * then the card is programmed for 57.6Kbps or 115Kbps
698 * respectively.
699 */
700
701 /* 1,2,3,4 => 57.6, 115.2, 230, 460 kbps resp. */
702 if (baud < 1 || baud > 4)
703 tty->termios->c_cflag &= ~CBAUDEX;
704 else
705 baud += 15;
706 }
707 if (baud == 15) {
708
709 /* the ASYNC_SPD_HI and ASYNC_SPD_VHI options are set
710 * by the set_serial_info ioctl ... this is done by
711 * the 'setserial' utility.
712 */
713
714 if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
715 baud++; /* 57.6 Kbps */
716 if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
717 baud += 2; /* 115 Kbps */
718 if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
719 baud += 3; /* 230 kbps*/
720 if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
721 baud += 4; /* 460 kbps*/
722 }
723 if (linuxb_to_isib[baud] == -1) {
724 /* hang up */
725 drop_dtr(port);
726 return;
727 } else
728 raise_dtr(port);
729
730 if (WaitTillCardIsFree(base) == 0) {
731 outw(0x8000 | (channel << shift_count) | 0x03, base);
732 outw(linuxb_to_isib[baud] << 8 | 0x03, base);
733 channel_setup = 0;
734 switch (C_CSIZE(tty)) {
735 case CS5:
736 channel_setup |= ISICOM_CS5;
737 break;
738 case CS6:
739 channel_setup |= ISICOM_CS6;
740 break;
741 case CS7:
742 channel_setup |= ISICOM_CS7;
743 break;
744 case CS8:
745 channel_setup |= ISICOM_CS8;
746 break;
747 }
748
749 if (C_CSTOPB(tty))
750 channel_setup |= ISICOM_2SB;
751 if (C_PARENB(tty)) {
752 channel_setup |= ISICOM_EVPAR;
753 if (C_PARODD(tty))
754 channel_setup |= ISICOM_ODPAR;
755 }
756 outw(channel_setup, base);
757 InterruptTheCard(base);
758 }
759 if (C_CLOCAL(tty))
760 port->port.flags &= ~ASYNC_CHECK_CD;
761 else
762 port->port.flags |= ASYNC_CHECK_CD;
763
764 /* flow control settings ...*/
765 flow_ctrl = 0;
766 port->port.flags &= ~ASYNC_CTS_FLOW;
767 if (C_CRTSCTS(tty)) {
768 port->port.flags |= ASYNC_CTS_FLOW;
769 flow_ctrl |= ISICOM_CTSRTS;
770 }
771 if (I_IXON(tty))
772 flow_ctrl |= ISICOM_RESPOND_XONXOFF;
773 if (I_IXOFF(tty))
774 flow_ctrl |= ISICOM_INITIATE_XONXOFF;
775
776 if (WaitTillCardIsFree(base) == 0) {
777 outw(0x8000 | (channel << shift_count) | 0x04, base);
778 outw(flow_ctrl << 8 | 0x05, base);
779 outw((STOP_CHAR(tty)) << 8 | (START_CHAR(tty)), base);
780 InterruptTheCard(base);
781 }
782
783 /* rx enabled -> enable port for rx on the card */
784 if (C_CREAD(tty)) {
785 card->port_status |= (1 << channel);
786 outw(card->port_status, base + 0x02);
787 }
788 }
789
790 /* open et all */
791
792 static inline void isicom_setup_board(struct isi_board *bp)
793 {
794 int channel;
795 struct isi_port *port;
796 unsigned long flags;
797
798 spin_lock_irqsave(&bp->card_lock, flags);
799 if (bp->status & BOARD_ACTIVE) {
800 spin_unlock_irqrestore(&bp->card_lock, flags);
801 return;
802 }
803 port = bp->ports;
804 bp->status |= BOARD_ACTIVE;
805 for (channel = 0; channel < bp->port_count; channel++, port++)
806 drop_dtr_rts(port);
807 spin_unlock_irqrestore(&bp->card_lock, flags);
808 }
809
810 static int isicom_setup_port(struct tty_struct *tty)
811 {
812 struct isi_port *port = tty->driver_data;
813 struct isi_board *card = port->card;
814 unsigned long flags;
815
816 if (port->port.flags & ASYNC_INITIALIZED)
817 return 0;
818 if (tty_port_alloc_xmit_buf(&port->port) < 0)
819 return -ENOMEM;
820
821 spin_lock_irqsave(&card->card_lock, flags);
822 clear_bit(TTY_IO_ERROR, &tty->flags);
823 if (port->port.count == 1)
824 card->count++;
825
826 port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
827
828 /* discard any residual data */
829 if (WaitTillCardIsFree(card->base) == 0) {
830 outw(0x8000 | (port->channel << card->shift_count) | 0x02,
831 card->base);
832 outw(((ISICOM_KILLTX | ISICOM_KILLRX) << 8) | 0x06, card->base);
833 InterruptTheCard(card->base);
834 }
835
836 isicom_config_port(tty);
837 port->port.flags |= ASYNC_INITIALIZED;
838 spin_unlock_irqrestore(&card->card_lock, flags);
839
840 return 0;
841 }
842
843 static int isicom_carrier_raised(struct tty_port *port)
844 {
845 struct isi_port *ip = container_of(port, struct isi_port, port);
846 return (ip->status & ISI_DCD)?1 : 0;
847 }
848
849 static struct tty_port *isicom_find_port(struct tty_struct *tty)
850 {
851 struct isi_port *port;
852 struct isi_board *card;
853 unsigned int board;
854 int line = tty->index;
855
856 if (line < 0 || line > PORT_COUNT-1)
857 return NULL;
858 board = BOARD(line);
859 card = &isi_card[board];
860
861 if (!(card->status & FIRMWARE_LOADED))
862 return NULL;
863
864 /* open on a port greater than the port count for the card !!! */
865 if (line > ((board * 16) + card->port_count - 1))
866 return NULL;
867
868 port = &isi_ports[line];
869 if (isicom_paranoia_check(port, tty->name, "isicom_open"))
870 return NULL;
871
872 return &port->port;
873 }
874
875 static int isicom_open(struct tty_struct *tty, struct file *filp)
876 {
877 struct isi_port *port;
878 struct isi_board *card;
879 struct tty_port *tport;
880 int error = 0;
881
882 tport = isicom_find_port(tty);
883 if (tport == NULL)
884 return -ENODEV;
885 port = container_of(tport, struct isi_port, port);
886 card = &isi_card[BOARD(tty->index)];
887 isicom_setup_board(card);
888
889 /* FIXME: locking on port.count etc */
890 port->port.count++;
891 tty->driver_data = port;
892 tty_port_tty_set(&port->port, tty);
893 /* FIXME: Locking on Initialized flag */
894 if (!test_bit(ASYNCB_INITIALIZED, &tport->flags))
895 error = isicom_setup_port(tty);
896 if (error == 0)
897 error = tty_port_block_til_ready(&port->port, tty, filp);
898 return error;
899 }
900
901 /* close et all */
902
903 static inline void isicom_shutdown_board(struct isi_board *bp)
904 {
905 if (bp->status & BOARD_ACTIVE)
906 bp->status &= ~BOARD_ACTIVE;
907 }
908
909 /* card->lock HAS to be held */
910 static void isicom_shutdown_port(struct isi_port *port)
911 {
912 struct isi_board *card = port->card;
913 struct tty_struct *tty;
914
915 tty = tty_port_tty_get(&port->port);
916
917 if (!(port->port.flags & ASYNC_INITIALIZED)) {
918 tty_kref_put(tty);
919 return;
920 }
921
922 tty_port_free_xmit_buf(&port->port);
923 port->port.flags &= ~ASYNC_INITIALIZED;
924 /* 3rd October 2000 : Vinayak P Risbud */
925 tty_port_tty_set(&port->port, NULL);
926
927 /*Fix done by Anil .S on 30-04-2001
928 remote login through isi port has dtr toggle problem
929 due to which the carrier drops before the password prompt
930 appears on the remote end. Now we drop the dtr only if the
931 HUPCL(Hangup on close) flag is set for the tty*/
932
933 if (C_HUPCL(tty))
934 /* drop dtr on this port */
935 drop_dtr(port);
936
937 /* any other port uninits */
938 if (tty)
939 set_bit(TTY_IO_ERROR, &tty->flags);
940
941 if (--card->count < 0) {
942 pr_dbg("isicom_shutdown_port: bad board(0x%lx) count %d.\n",
943 card->base, card->count);
944 card->count = 0;
945 }
946
947 /* last port was closed, shutdown that boad too */
948 if (C_HUPCL(tty)) {
949 if (!card->count)
950 isicom_shutdown_board(card);
951 }
952 tty_kref_put(tty);
953 }
954
955 static void isicom_flush_buffer(struct tty_struct *tty)
956 {
957 struct isi_port *port = tty->driver_data;
958 struct isi_board *card = port->card;
959 unsigned long flags;
960
961 if (isicom_paranoia_check(port, tty->name, "isicom_flush_buffer"))
962 return;
963
964 spin_lock_irqsave(&card->card_lock, flags);
965 port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
966 spin_unlock_irqrestore(&card->card_lock, flags);
967
968 tty_wakeup(tty);
969 }
970
971 static void isicom_close_port(struct tty_port *port)
972 {
973 struct isi_port *ip = container_of(port, struct isi_port, port);
974 struct isi_board *card = ip->card;
975 unsigned long flags;
976
977 /* indicate to the card that no more data can be received
978 on this port */
979 spin_lock_irqsave(&card->card_lock, flags);
980 if (port->flags & ASYNC_INITIALIZED) {
981 card->port_status &= ~(1 << ip->channel);
982 outw(card->port_status, card->base + 0x02);
983 }
984 isicom_shutdown_port(ip);
985 spin_unlock_irqrestore(&card->card_lock, flags);
986 }
987
988 static void isicom_close(struct tty_struct *tty, struct file *filp)
989 {
990 struct isi_port *ip = tty->driver_data;
991 struct tty_port *port = &ip->port;
992 if (isicom_paranoia_check(ip, tty->name, "isicom_close"))
993 return;
994
995 if (tty_port_close_start(port, tty, filp) == 0)
996 return;
997 isicom_close_port(port);
998 isicom_flush_buffer(tty);
999 tty_port_close_end(port, tty);
1000 }
1001
1002 /* write et all */
1003 static int isicom_write(struct tty_struct *tty, const unsigned char *buf,
1004 int count)
1005 {
1006 struct isi_port *port = tty->driver_data;
1007 struct isi_board *card = port->card;
1008 unsigned long flags;
1009 int cnt, total = 0;
1010
1011 if (isicom_paranoia_check(port, tty->name, "isicom_write"))
1012 return 0;
1013
1014 spin_lock_irqsave(&card->card_lock, flags);
1015
1016 while (1) {
1017 cnt = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt
1018 - 1, SERIAL_XMIT_SIZE - port->xmit_head));
1019 if (cnt <= 0)
1020 break;
1021
1022 memcpy(port->port.xmit_buf + port->xmit_head, buf, cnt);
1023 port->xmit_head = (port->xmit_head + cnt) & (SERIAL_XMIT_SIZE
1024 - 1);
1025 port->xmit_cnt += cnt;
1026 buf += cnt;
1027 count -= cnt;
1028 total += cnt;
1029 }
1030 if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped)
1031 port->status |= ISI_TXOK;
1032 spin_unlock_irqrestore(&card->card_lock, flags);
1033 return total;
1034 }
1035
1036 /* put_char et all */
1037 static int isicom_put_char(struct tty_struct *tty, unsigned char ch)
1038 {
1039 struct isi_port *port = tty->driver_data;
1040 struct isi_board *card = port->card;
1041 unsigned long flags;
1042
1043 if (isicom_paranoia_check(port, tty->name, "isicom_put_char"))
1044 return 0;
1045
1046 spin_lock_irqsave(&card->card_lock, flags);
1047 if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) {
1048 spin_unlock_irqrestore(&card->card_lock, flags);
1049 return 0;
1050 }
1051
1052 port->port.xmit_buf[port->xmit_head++] = ch;
1053 port->xmit_head &= (SERIAL_XMIT_SIZE - 1);
1054 port->xmit_cnt++;
1055 spin_unlock_irqrestore(&card->card_lock, flags);
1056 return 1;
1057 }
1058
1059 /* flush_chars et all */
1060 static void isicom_flush_chars(struct tty_struct *tty)
1061 {
1062 struct isi_port *port = tty->driver_data;
1063
1064 if (isicom_paranoia_check(port, tty->name, "isicom_flush_chars"))
1065 return;
1066
1067 if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
1068 !port->port.xmit_buf)
1069 return;
1070
1071 /* this tells the transmitter to consider this port for
1072 data output to the card ... that's the best we can do. */
1073 port->status |= ISI_TXOK;
1074 }
1075
1076 /* write_room et all */
1077 static int isicom_write_room(struct tty_struct *tty)
1078 {
1079 struct isi_port *port = tty->driver_data;
1080 int free;
1081
1082 if (isicom_paranoia_check(port, tty->name, "isicom_write_room"))
1083 return 0;
1084
1085 free = SERIAL_XMIT_SIZE - port->xmit_cnt - 1;
1086 if (free < 0)
1087 free = 0;
1088 return free;
1089 }
1090
1091 /* chars_in_buffer et all */
1092 static int isicom_chars_in_buffer(struct tty_struct *tty)
1093 {
1094 struct isi_port *port = tty->driver_data;
1095 if (isicom_paranoia_check(port, tty->name, "isicom_chars_in_buffer"))
1096 return 0;
1097 return port->xmit_cnt;
1098 }
1099
1100 /* ioctl et all */
1101 static int isicom_send_break(struct tty_struct *tty, int length)
1102 {
1103 struct isi_port *port = tty->driver_data;
1104 struct isi_board *card = port->card;
1105 unsigned long base = card->base;
1106
1107 if (length == -1)
1108 return -EOPNOTSUPP;
1109
1110 if (!lock_card(card))
1111 return -EINVAL;
1112
1113 outw(0x8000 | ((port->channel) << (card->shift_count)) | 0x3, base);
1114 outw((length & 0xff) << 8 | 0x00, base);
1115 outw((length & 0xff00), base);
1116 InterruptTheCard(base);
1117
1118 unlock_card(card);
1119 return 0;
1120 }
1121
1122 static int isicom_tiocmget(struct tty_struct *tty, struct file *file)
1123 {
1124 struct isi_port *port = tty->driver_data;
1125 /* just send the port status */
1126 u16 status = port->status;
1127
1128 if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
1129 return -ENODEV;
1130
1131 return ((status & ISI_RTS) ? TIOCM_RTS : 0) |
1132 ((status & ISI_DTR) ? TIOCM_DTR : 0) |
1133 ((status & ISI_DCD) ? TIOCM_CAR : 0) |
1134 ((status & ISI_DSR) ? TIOCM_DSR : 0) |
1135 ((status & ISI_CTS) ? TIOCM_CTS : 0) |
1136 ((status & ISI_RI ) ? TIOCM_RI : 0);
1137 }
1138
1139 static int isicom_tiocmset(struct tty_struct *tty, struct file *file,
1140 unsigned int set, unsigned int clear)
1141 {
1142 struct isi_port *port = tty->driver_data;
1143 unsigned long flags;
1144
1145 if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
1146 return -ENODEV;
1147
1148 spin_lock_irqsave(&port->card->card_lock, flags);
1149 if (set & TIOCM_RTS)
1150 raise_rts(port);
1151 if (set & TIOCM_DTR)
1152 raise_dtr(port);
1153
1154 if (clear & TIOCM_RTS)
1155 drop_rts(port);
1156 if (clear & TIOCM_DTR)
1157 drop_dtr(port);
1158 spin_unlock_irqrestore(&port->card->card_lock, flags);
1159
1160 return 0;
1161 }
1162
1163 static int isicom_set_serial_info(struct tty_struct *tty,
1164 struct serial_struct __user *info)
1165 {
1166 struct isi_port *port = tty->driver_data;
1167 struct serial_struct newinfo;
1168 int reconfig_port;
1169
1170 if (copy_from_user(&newinfo, info, sizeof(newinfo)))
1171 return -EFAULT;
1172
1173 lock_kernel();
1174
1175 reconfig_port = ((port->port.flags & ASYNC_SPD_MASK) !=
1176 (newinfo.flags & ASYNC_SPD_MASK));
1177
1178 if (!capable(CAP_SYS_ADMIN)) {
1179 if ((newinfo.close_delay != port->port.close_delay) ||
1180 (newinfo.closing_wait != port->port.closing_wait) ||
1181 ((newinfo.flags & ~ASYNC_USR_MASK) !=
1182 (port->port.flags & ~ASYNC_USR_MASK))) {
1183 unlock_kernel();
1184 return -EPERM;
1185 }
1186 port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
1187 (newinfo.flags & ASYNC_USR_MASK));
1188 } else {
1189 port->port.close_delay = newinfo.close_delay;
1190 port->port.closing_wait = newinfo.closing_wait;
1191 port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
1192 (newinfo.flags & ASYNC_FLAGS));
1193 }
1194 if (reconfig_port) {
1195 unsigned long flags;
1196 spin_lock_irqsave(&port->card->card_lock, flags);
1197 isicom_config_port(tty);
1198 spin_unlock_irqrestore(&port->card->card_lock, flags);
1199 }
1200 unlock_kernel();
1201 return 0;
1202 }
1203
1204 static int isicom_get_serial_info(struct isi_port *port,
1205 struct serial_struct __user *info)
1206 {
1207 struct serial_struct out_info;
1208
1209 lock_kernel();
1210 memset(&out_info, 0, sizeof(out_info));
1211 /* out_info.type = ? */
1212 out_info.line = port - isi_ports;
1213 out_info.port = port->card->base;
1214 out_info.irq = port->card->irq;
1215 out_info.flags = port->port.flags;
1216 /* out_info.baud_base = ? */
1217 out_info.close_delay = port->port.close_delay;
1218 out_info.closing_wait = port->port.closing_wait;
1219 unlock_kernel();
1220 if (copy_to_user(info, &out_info, sizeof(out_info)))
1221 return -EFAULT;
1222 return 0;
1223 }
1224
1225 static int isicom_ioctl(struct tty_struct *tty, struct file *filp,
1226 unsigned int cmd, unsigned long arg)
1227 {
1228 struct isi_port *port = tty->driver_data;
1229 void __user *argp = (void __user *)arg;
1230
1231 if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
1232 return -ENODEV;
1233
1234 switch (cmd) {
1235 case TIOCGSERIAL:
1236 return isicom_get_serial_info(port, argp);
1237
1238 case TIOCSSERIAL:
1239 return isicom_set_serial_info(tty, argp);
1240
1241 default:
1242 return -ENOIOCTLCMD;
1243 }
1244 return 0;
1245 }
1246
1247 /* set_termios et all */
1248 static void isicom_set_termios(struct tty_struct *tty,
1249 struct ktermios *old_termios)
1250 {
1251 struct isi_port *port = tty->driver_data;
1252 unsigned long flags;
1253
1254 if (isicom_paranoia_check(port, tty->name, "isicom_set_termios"))
1255 return;
1256
1257 if (tty->termios->c_cflag == old_termios->c_cflag &&
1258 tty->termios->c_iflag == old_termios->c_iflag)
1259 return;
1260
1261 spin_lock_irqsave(&port->card->card_lock, flags);
1262 isicom_config_port(tty);
1263 spin_unlock_irqrestore(&port->card->card_lock, flags);
1264
1265 if ((old_termios->c_cflag & CRTSCTS) &&
1266 !(tty->termios->c_cflag & CRTSCTS)) {
1267 tty->hw_stopped = 0;
1268 isicom_start(tty);
1269 }
1270 }
1271
1272 /* throttle et all */
1273 static void isicom_throttle(struct tty_struct *tty)
1274 {
1275 struct isi_port *port = tty->driver_data;
1276 struct isi_board *card = port->card;
1277
1278 if (isicom_paranoia_check(port, tty->name, "isicom_throttle"))
1279 return;
1280
1281 /* tell the card that this port cannot handle any more data for now */
1282 card->port_status &= ~(1 << port->channel);
1283 outw(card->port_status, card->base + 0x02);
1284 }
1285
1286 /* unthrottle et all */
1287 static void isicom_unthrottle(struct tty_struct *tty)
1288 {
1289 struct isi_port *port = tty->driver_data;
1290 struct isi_board *card = port->card;
1291
1292 if (isicom_paranoia_check(port, tty->name, "isicom_unthrottle"))
1293 return;
1294
1295 /* tell the card that this port is ready to accept more data */
1296 card->port_status |= (1 << port->channel);
1297 outw(card->port_status, card->base + 0x02);
1298 }
1299
1300 /* stop et all */
1301 static void isicom_stop(struct tty_struct *tty)
1302 {
1303 struct isi_port *port = tty->driver_data;
1304
1305 if (isicom_paranoia_check(port, tty->name, "isicom_stop"))
1306 return;
1307
1308 /* this tells the transmitter not to consider this port for
1309 data output to the card. */
1310 port->status &= ~ISI_TXOK;
1311 }
1312
1313 /* start et all */
1314 static void isicom_start(struct tty_struct *tty)
1315 {
1316 struct isi_port *port = tty->driver_data;
1317
1318 if (isicom_paranoia_check(port, tty->name, "isicom_start"))
1319 return;
1320
1321 /* this tells the transmitter to consider this port for
1322 data output to the card. */
1323 port->status |= ISI_TXOK;
1324 }
1325
1326 static void isicom_hangup(struct tty_struct *tty)
1327 {
1328 struct isi_port *port = tty->driver_data;
1329 unsigned long flags;
1330
1331 if (isicom_paranoia_check(port, tty->name, "isicom_hangup"))
1332 return;
1333
1334 spin_lock_irqsave(&port->card->card_lock, flags);
1335 isicom_shutdown_port(port);
1336 spin_unlock_irqrestore(&port->card->card_lock, flags);
1337
1338 tty_port_hangup(&port->port);
1339 }
1340
1341
1342 /*
1343 * Driver init and deinit functions
1344 */
1345
1346 static const struct tty_operations isicom_ops = {
1347 .open = isicom_open,
1348 .close = isicom_close,
1349 .write = isicom_write,
1350 .put_char = isicom_put_char,
1351 .flush_chars = isicom_flush_chars,
1352 .write_room = isicom_write_room,
1353 .chars_in_buffer = isicom_chars_in_buffer,
1354 .ioctl = isicom_ioctl,
1355 .set_termios = isicom_set_termios,
1356 .throttle = isicom_throttle,
1357 .unthrottle = isicom_unthrottle,
1358 .stop = isicom_stop,
1359 .start = isicom_start,
1360 .hangup = isicom_hangup,
1361 .flush_buffer = isicom_flush_buffer,
1362 .tiocmget = isicom_tiocmget,
1363 .tiocmset = isicom_tiocmset,
1364 .break_ctl = isicom_send_break,
1365 };
1366
1367 static const struct tty_port_operations isicom_port_ops = {
1368 .carrier_raised = isicom_carrier_raised,
1369 .dtr_rts = isicom_dtr_rts,
1370 };
1371
1372 static int __devinit reset_card(struct pci_dev *pdev,
1373 const unsigned int card, unsigned int *signature)
1374 {
1375 struct isi_board *board = pci_get_drvdata(pdev);
1376 unsigned long base = board->base;
1377 unsigned int sig, portcount = 0;
1378 int retval = 0;
1379
1380 dev_dbg(&pdev->dev, "ISILoad:Resetting Card%d at 0x%lx\n", card + 1,
1381 base);
1382
1383 inw(base + 0x8);
1384
1385 msleep(10);
1386
1387 outw(0, base + 0x8); /* Reset */
1388
1389 msleep(1000);
1390
1391 sig = inw(base + 0x4) & 0xff;
1392
1393 if (sig != 0xa5 && sig != 0xbb && sig != 0xcc && sig != 0xdd &&
1394 sig != 0xee) {
1395 dev_warn(&pdev->dev, "ISILoad:Card%u reset failure (Possible "
1396 "bad I/O Port Address 0x%lx).\n", card + 1, base);
1397 dev_dbg(&pdev->dev, "Sig=0x%x\n", sig);
1398 retval = -EIO;
1399 goto end;
1400 }
1401
1402 msleep(10);
1403
1404 portcount = inw(base + 0x2);
1405 if (!(inw(base + 0xe) & 0x1) || (portcount != 0 && portcount != 4 &&
1406 portcount != 8 && portcount != 16)) {
1407 dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure.\n",
1408 card + 1);
1409 retval = -EIO;
1410 goto end;
1411 }
1412
1413 switch (sig) {
1414 case 0xa5:
1415 case 0xbb:
1416 case 0xdd:
1417 board->port_count = (portcount == 4) ? 4 : 8;
1418 board->shift_count = 12;
1419 break;
1420 case 0xcc:
1421 case 0xee:
1422 board->port_count = 16;
1423 board->shift_count = 11;
1424 break;
1425 }
1426 dev_info(&pdev->dev, "-Done\n");
1427 *signature = sig;
1428
1429 end:
1430 return retval;
1431 }
1432
1433 static int __devinit load_firmware(struct pci_dev *pdev,
1434 const unsigned int index, const unsigned int signature)
1435 {
1436 struct isi_board *board = pci_get_drvdata(pdev);
1437 const struct firmware *fw;
1438 unsigned long base = board->base;
1439 unsigned int a;
1440 u16 word_count, status;
1441 int retval = -EIO;
1442 char *name;
1443 u8 *data;
1444
1445 struct stframe {
1446 u16 addr;
1447 u16 count;
1448 u8 data[0];
1449 } *frame;
1450
1451 switch (signature) {
1452 case 0xa5:
1453 name = "isi608.bin";
1454 break;
1455 case 0xbb:
1456 name = "isi608em.bin";
1457 break;
1458 case 0xcc:
1459 name = "isi616em.bin";
1460 break;
1461 case 0xdd:
1462 name = "isi4608.bin";
1463 break;
1464 case 0xee:
1465 name = "isi4616.bin";
1466 break;
1467 default:
1468 dev_err(&pdev->dev, "Unknown signature.\n");
1469 goto end;
1470 }
1471
1472 retval = request_firmware(&fw, name, &pdev->dev);
1473 if (retval)
1474 goto end;
1475
1476 retval = -EIO;
1477
1478 for (frame = (struct stframe *)fw->data;
1479 frame < (struct stframe *)(fw->data + fw->size);
1480 frame = (struct stframe *)((u8 *)(frame + 1) +
1481 frame->count)) {
1482 if (WaitTillCardIsFree(base))
1483 goto errrelfw;
1484
1485 outw(0xf0, base); /* start upload sequence */
1486 outw(0x00, base);
1487 outw(frame->addr, base); /* lsb of address */
1488
1489 word_count = frame->count / 2 + frame->count % 2;
1490 outw(word_count, base);
1491 InterruptTheCard(base);
1492
1493 udelay(100); /* 0x2f */
1494
1495 if (WaitTillCardIsFree(base))
1496 goto errrelfw;
1497
1498 status = inw(base + 0x4);
1499 if (status != 0) {
1500 dev_warn(&pdev->dev, "Card%d rejected load header:\n"
1501 "Address:0x%x\n"
1502 "Count:0x%x\n"
1503 "Status:0x%x\n",
1504 index + 1, frame->addr, frame->count, status);
1505 goto errrelfw;
1506 }
1507 outsw(base, frame->data, word_count);
1508
1509 InterruptTheCard(base);
1510
1511 udelay(50); /* 0x0f */
1512
1513 if (WaitTillCardIsFree(base))
1514 goto errrelfw;
1515
1516 status = inw(base + 0x4);
1517 if (status != 0) {
1518 dev_err(&pdev->dev, "Card%d got out of sync.Card "
1519 "Status:0x%x\n", index + 1, status);
1520 goto errrelfw;
1521 }
1522 }
1523
1524 /* XXX: should we test it by reading it back and comparing with original like
1525 * in load firmware package? */
1526 for (frame = (struct stframe *)fw->data;
1527 frame < (struct stframe *)(fw->data + fw->size);
1528 frame = (struct stframe *)((u8 *)(frame + 1) +
1529 frame->count)) {
1530 if (WaitTillCardIsFree(base))
1531 goto errrelfw;
1532
1533 outw(0xf1, base); /* start download sequence */
1534 outw(0x00, base);
1535 outw(frame->addr, base); /* lsb of address */
1536
1537 word_count = (frame->count >> 1) + frame->count % 2;
1538 outw(word_count + 1, base);
1539 InterruptTheCard(base);
1540
1541 udelay(50); /* 0xf */
1542
1543 if (WaitTillCardIsFree(base))
1544 goto errrelfw;
1545
1546 status = inw(base + 0x4);
1547 if (status != 0) {
1548 dev_warn(&pdev->dev, "Card%d rejected verify header:\n"
1549 "Address:0x%x\n"
1550 "Count:0x%x\n"
1551 "Status: 0x%x\n",
1552 index + 1, frame->addr, frame->count, status);
1553 goto errrelfw;
1554 }
1555
1556 data = kmalloc(word_count * 2, GFP_KERNEL);
1557 if (data == NULL) {
1558 dev_err(&pdev->dev, "Card%d, firmware upload "
1559 "failed, not enough memory\n", index + 1);
1560 goto errrelfw;
1561 }
1562 inw(base);
1563 insw(base, data, word_count);
1564 InterruptTheCard(base);
1565
1566 for (a = 0; a < frame->count; a++)
1567 if (data[a] != frame->data[a]) {
1568 kfree(data);
1569 dev_err(&pdev->dev, "Card%d, firmware upload "
1570 "failed\n", index + 1);
1571 goto errrelfw;
1572 }
1573 kfree(data);
1574
1575 udelay(50); /* 0xf */
1576
1577 if (WaitTillCardIsFree(base))
1578 goto errrelfw;
1579
1580 status = inw(base + 0x4);
1581 if (status != 0) {
1582 dev_err(&pdev->dev, "Card%d verify got out of sync. "
1583 "Card Status:0x%x\n", index + 1, status);
1584 goto errrelfw;
1585 }
1586 }
1587
1588 /* xfer ctrl */
1589 if (WaitTillCardIsFree(base))
1590 goto errrelfw;
1591
1592 outw(0xf2, base);
1593 outw(0x800, base);
1594 outw(0x0, base);
1595 outw(0x0, base);
1596 InterruptTheCard(base);
1597 outw(0x0, base + 0x4); /* for ISI4608 cards */
1598
1599 board->status |= FIRMWARE_LOADED;
1600 retval = 0;
1601
1602 errrelfw:
1603 release_firmware(fw);
1604 end:
1605 return retval;
1606 }
1607
1608 /*
1609 * Insmod can set static symbols so keep these static
1610 */
1611 static unsigned int card_count;
1612
1613 static int __devinit isicom_probe(struct pci_dev *pdev,
1614 const struct pci_device_id *ent)
1615 {
1616 unsigned int uninitialized_var(signature), index;
1617 int retval = -EPERM;
1618 struct isi_board *board = NULL;
1619
1620 if (card_count >= BOARD_COUNT)
1621 goto err;
1622
1623 retval = pci_enable_device(pdev);
1624 if (retval) {
1625 dev_err(&pdev->dev, "failed to enable\n");
1626 goto err;
1627 }
1628
1629 dev_info(&pdev->dev, "ISI PCI Card(Device ID 0x%x)\n", ent->device);
1630
1631 /* allot the first empty slot in the array */
1632 for (index = 0; index < BOARD_COUNT; index++)
1633 if (isi_card[index].base == 0) {
1634 board = &isi_card[index];
1635 break;
1636 }
1637
1638 board->index = index;
1639 board->base = pci_resource_start(pdev, 3);
1640 board->irq = pdev->irq;
1641 card_count++;
1642
1643 pci_set_drvdata(pdev, board);
1644
1645 retval = pci_request_region(pdev, 3, ISICOM_NAME);
1646 if (retval) {
1647 dev_err(&pdev->dev, "I/O Region 0x%lx-0x%lx is busy. Card%d "
1648 "will be disabled.\n", board->base, board->base + 15,
1649 index + 1);
1650 retval = -EBUSY;
1651 goto errdec;
1652 }
1653
1654 retval = request_irq(board->irq, isicom_interrupt,
1655 IRQF_SHARED | IRQF_DISABLED, ISICOM_NAME, board);
1656 if (retval < 0) {
1657 dev_err(&pdev->dev, "Could not install handler at Irq %d. "
1658 "Card%d will be disabled.\n", board->irq, index + 1);
1659 goto errunrr;
1660 }
1661
1662 retval = reset_card(pdev, index, &signature);
1663 if (retval < 0)
1664 goto errunri;
1665
1666 retval = load_firmware(pdev, index, signature);
1667 if (retval < 0)
1668 goto errunri;
1669
1670 for (index = 0; index < board->port_count; index++)
1671 tty_register_device(isicom_normal, board->index * 16 + index,
1672 &pdev->dev);
1673
1674 return 0;
1675
1676 errunri:
1677 free_irq(board->irq, board);
1678 errunrr:
1679 pci_release_region(pdev, 3);
1680 errdec:
1681 board->base = 0;
1682 card_count--;
1683 pci_disable_device(pdev);
1684 err:
1685 return retval;
1686 }
1687
1688 static void __devexit isicom_remove(struct pci_dev *pdev)
1689 {
1690 struct isi_board *board = pci_get_drvdata(pdev);
1691 unsigned int i;
1692
1693 for (i = 0; i < board->port_count; i++)
1694 tty_unregister_device(isicom_normal, board->index * 16 + i);
1695
1696 free_irq(board->irq, board);
1697 pci_release_region(pdev, 3);
1698 board->base = 0;
1699 card_count--;
1700 pci_disable_device(pdev);
1701 }
1702
1703 static int __init isicom_init(void)
1704 {
1705 int retval, idx, channel;
1706 struct isi_port *port;
1707
1708 for (idx = 0; idx < BOARD_COUNT; idx++) {
1709 port = &isi_ports[idx * 16];
1710 isi_card[idx].ports = port;
1711 spin_lock_init(&isi_card[idx].card_lock);
1712 for (channel = 0; channel < 16; channel++, port++) {
1713 tty_port_init(&port->port);
1714 port->port.ops = &isicom_port_ops;
1715 port->magic = ISICOM_MAGIC;
1716 port->card = &isi_card[idx];
1717 port->channel = channel;
1718 port->port.close_delay = 50 * HZ/100;
1719 port->port.closing_wait = 3000 * HZ/100;
1720 port->status = 0;
1721 /* . . . */
1722 }
1723 isi_card[idx].base = 0;
1724 isi_card[idx].irq = 0;
1725 }
1726
1727 /* tty driver structure initialization */
1728 isicom_normal = alloc_tty_driver(PORT_COUNT);
1729 if (!isicom_normal) {
1730 retval = -ENOMEM;
1731 goto error;
1732 }
1733
1734 isicom_normal->owner = THIS_MODULE;
1735 isicom_normal->name = "ttyM";
1736 isicom_normal->major = ISICOM_NMAJOR;
1737 isicom_normal->minor_start = 0;
1738 isicom_normal->type = TTY_DRIVER_TYPE_SERIAL;
1739 isicom_normal->subtype = SERIAL_TYPE_NORMAL;
1740 isicom_normal->init_termios = tty_std_termios;
1741 isicom_normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
1742 CLOCAL;
1743 isicom_normal->flags = TTY_DRIVER_REAL_RAW |
1744 TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_HARDWARE_BREAK;
1745 tty_set_operations(isicom_normal, &isicom_ops);
1746
1747 retval = tty_register_driver(isicom_normal);
1748 if (retval) {
1749 pr_dbg("Couldn't register the dialin driver\n");
1750 goto err_puttty;
1751 }
1752
1753 retval = pci_register_driver(&isicom_driver);
1754 if (retval < 0) {
1755 printk(KERN_ERR "ISICOM: Unable to register pci driver.\n");
1756 goto err_unrtty;
1757 }
1758
1759 mod_timer(&tx, jiffies + 1);
1760
1761 return 0;
1762 err_unrtty:
1763 tty_unregister_driver(isicom_normal);
1764 err_puttty:
1765 put_tty_driver(isicom_normal);
1766 error:
1767 return retval;
1768 }
1769
1770 static void __exit isicom_exit(void)
1771 {
1772 del_timer_sync(&tx);
1773
1774 pci_unregister_driver(&isicom_driver);
1775 tty_unregister_driver(isicom_normal);
1776 put_tty_driver(isicom_normal);
1777 }
1778
1779 module_init(isicom_init);
1780 module_exit(isicom_exit);
1781
1782 MODULE_AUTHOR("MultiTech");
1783 MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech");
1784 MODULE_LICENSE("GPL");
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree