arch/arm/mach-s3c2440/mach-anubis.c

   1 /* linux/arch/arm/mach-s3c2440/mach-anubis.c
   2  *
   3  * Copyright 2003-2009 Simtec Electronics
   4  *      http://armlinux.simtec.co.uk/
   5  *      Ben Dooks <ben@simtec.co.uk>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10 */
  11
  12 #include <linux/kernel.h>
  13 #include <linux/types.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/list.h>
  16 #include <linux/timer.h>
  17 #include <linux/init.h>
  18 #include <linux/gpio.h>
  19 #include <linux/serial_core.h>
  20 #include <linux/platform_device.h>
  21 #include <linux/ata_platform.h>
  22 #include <linux/i2c.h>
  23 #include <linux/io.h>
  24 #include <linux/sm501.h>
  25 #include <linux/sm501-regs.h>
  26
  27 #include <asm/mach/arch.h>
  28 #include <asm/mach/map.h>
  29 #include <asm/mach/irq.h>
  30
  31 #include <mach/anubis-map.h>
  32 #include <mach/anubis-irq.h>
  33 #include <mach/anubis-cpld.h>
  34
  35 #include <mach/hardware.h>
  36 #include <asm/irq.h>
  37 #include <asm/mach-types.h>
  38
  39 #include <plat/regs-serial.h>
  40 #include <mach/regs-gpio.h>
  41 #include <mach/regs-mem.h>
  42 #include <mach/regs-lcd.h>
  43 #include <plat/nand.h>
  44 #include <plat/iic.h>
  45
  46 #include <linux/mtd/mtd.h>
  47 #include <linux/mtd/nand.h>
  48 #include <linux/mtd/nand_ecc.h>
  49 #include <linux/mtd/partitions.h>
  50
  51 #include <net/ax88796.h>
  52
  53 #include <plat/clock.h>
  54 #include <plat/devs.h>
  55 #include <plat/cpu.h>
  56 #include <plat/audio-simtec.h>
  57
  58 #define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
  59
  60 static struct map_desc anubis_iodesc[] __initdata = {
  61   /* ISA IO areas */
  62
  63   {
  64         .virtual        = (u32)S3C24XX_VA_ISA_BYTE,
  65         .pfn            = __phys_to_pfn(0x0),
  66         .length         = SZ_4M,
  67         .type           = MT_DEVICE,
  68   }, {
  69         .virtual        = (u32)S3C24XX_VA_ISA_WORD,
  70         .pfn            = __phys_to_pfn(0x0),
  71         .length         = SZ_4M,
  72         .type           = MT_DEVICE,
  73   },
  74
  75   /* we could possibly compress the next set down into a set of smaller tables
  76    * pagetables, but that would mean using an L2 section, and it still means
  77    * we cannot actually feed the same register to an LDR due to 16K spacing
  78    */
  79
  80   /* CPLD control registers */
  81
  82   {
  83         .virtual        = (u32)ANUBIS_VA_CTRL1,
  84         .pfn            = __phys_to_pfn(ANUBIS_PA_CTRL1),
  85         .length         = SZ_4K,
  86         .type           = MT_DEVICE,
  87   }, {
  88         .virtual        = (u32)ANUBIS_VA_IDREG,
  89         .pfn            = __phys_to_pfn(ANUBIS_PA_IDREG),
  90         .length         = SZ_4K,
  91         .type           = MT_DEVICE,
  92   },
  93 };
  94
  95 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
  96 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
  97 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
  98
  99 static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = {
 100         [0] = {
 101                 .name           = "uclk",
 102                 .divisor        = 1,
 103                 .min_baud       = 0,
 104                 .max_baud       = 0,
 105         },
 106         [1] = {
 107                 .name           = "pclk",
 108                 .divisor        = 1,
 109                 .min_baud       = 0,
 110                 .max_baud       = 0,
 111         }
 112 };
 113
 114
 115 static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
 116         [0] = {
 117                 .hwport      = 0,
 118                 .flags       = 0,
 119                 .ucon        = UCON,
 120                 .ulcon       = ULCON,
 121                 .ufcon       = UFCON,
 122                 .clocks      = anubis_serial_clocks,
 123                 .clocks_size = ARRAY_SIZE(anubis_serial_clocks),
 124         },
 125         [1] = {
 126                 .hwport      = 2,
 127                 .flags       = 0,
 128                 .ucon        = UCON,
 129                 .ulcon       = ULCON,
 130                 .ufcon       = UFCON,
 131                 .clocks      = anubis_serial_clocks,
 132                 .clocks_size = ARRAY_SIZE(anubis_serial_clocks),
 133         },
 134 };
 135
 136 /* NAND Flash on Anubis board */
 137
 138 static int external_map[]   = { 2 };
 139 static int chip0_map[]      = { 0 };
 140 static int chip1_map[]      = { 1 };
 141
 142 static struct mtd_partition __initdata anubis_default_nand_part[] = {
 143         [0] = {
 144                 .name   = "Boot Agent",
 145                 .size   = SZ_16K,
 146                 .offset = 0,
 147         },
 148         [1] = {
 149                 .name   = "/boot",
 150                 .size   = SZ_4M - SZ_16K,
 151                 .offset = SZ_16K,
 152         },
 153         [2] = {
 154                 .name   = "user1",
 155                 .offset = SZ_4M,
 156                 .size   = SZ_32M - SZ_4M,
 157         },
 158         [3] = {
 159                 .name   = "user2",
 160                 .offset = SZ_32M,
 161                 .size   = MTDPART_SIZ_FULL,
 162         }
 163 };
 164
 165 static struct mtd_partition __initdata anubis_default_nand_part_large[] = {
 166         [0] = {
 167                 .name   = "Boot Agent",
 168                 .size   = SZ_128K,
 169                 .offset = 0,
 170         },
 171         [1] = {
 172                 .name   = "/boot",
 173                 .size   = SZ_4M - SZ_128K,
 174                 .offset = SZ_128K,
 175         },
 176         [2] = {
 177                 .name   = "user1",
 178                 .offset = SZ_4M,
 179                 .size   = SZ_32M - SZ_4M,
 180         },
 181         [3] = {
 182                 .name   = "user2",
 183                 .offset = SZ_32M,
 184                 .size   = MTDPART_SIZ_FULL,
 185         }
 186 };
 187
 188 /* the Anubis has 3 selectable slots for nand-flash, the two
 189  * on-board chip areas, as well as the external slot.
 190  *
 191  * Note, there is no current hot-plug support for the External
 192  * socket.
 193 */
 194
 195 static struct s3c2410_nand_set __initdata anubis_nand_sets[] = {
 196         [1] = {
 197                 .name           = "External",
 198                 .nr_chips       = 1,
 199                 .nr_map         = external_map,
 200                 .nr_partitions  = ARRAY_SIZE(anubis_default_nand_part),
 201                 .partitions     = anubis_default_nand_part,
 202         },
 203         [0] = {
 204                 .name           = "chip0",
 205                 .nr_chips       = 1,
 206                 .nr_map         = chip0_map,
 207                 .nr_partitions  = ARRAY_SIZE(anubis_default_nand_part),
 208                 .partitions     = anubis_default_nand_part,
 209         },
 210         [2] = {
 211                 .name           = "chip1",
 212                 .nr_chips       = 1,
 213                 .nr_map         = chip1_map,
 214                 .nr_partitions  = ARRAY_SIZE(anubis_default_nand_part),
 215                 .partitions     = anubis_default_nand_part,
 216         },
 217 };
 218
 219 static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
 220 {
 221         unsigned int tmp;
 222
 223         slot = set->nr_map[slot] & 3;
 224
 225         pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
 226                  slot, set, set->nr_map);
 227
 228         tmp = __raw_readb(ANUBIS_VA_CTRL1);
 229         tmp &= ~ANUBIS_CTRL1_NANDSEL;
 230         tmp |= slot;
 231
 232         pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
 233
 234         __raw_writeb(tmp, ANUBIS_VA_CTRL1);
 235 }
 236
 237 static struct s3c2410_platform_nand __initdata anubis_nand_info = {
 238         .tacls          = 25,
 239         .twrph0         = 55,
 240         .twrph1         = 40,
 241         .nr_sets        = ARRAY_SIZE(anubis_nand_sets),
 242         .sets           = anubis_nand_sets,
 243         .select_chip    = anubis_nand_select,
 244 };
 245
 246 /* IDE channels */
 247
 248 static struct pata_platform_info anubis_ide_platdata = {
 249         .ioport_shift   = 5,
 250 };
 251
 252 static struct resource anubis_ide0_resource[] = {
 253         {
 254                 .start  = S3C2410_CS3,
 255                 .end    = S3C2410_CS3 + (8*32) - 1,
 256                 .flags  = IORESOURCE_MEM,
 257         }, {
 258                 .start  = S3C2410_CS3 + (1<<26) + (6*32),
 259                 .end    = S3C2410_CS3 + (1<<26) + (7*32) - 1,
 260                 .flags  = IORESOURCE_MEM,
 261         }, {
 262                 .start  = IRQ_IDE0,
 263                 .end    = IRQ_IDE0,
 264                 .flags  = IORESOURCE_IRQ,
 265         },
 266 };
 267
 268 static struct platform_device anubis_device_ide0 = {
 269         .name           = "pata_platform",
 270         .id             = 0,
 271         .num_resources  = ARRAY_SIZE(anubis_ide0_resource),
 272         .resource       = anubis_ide0_resource,
 273         .dev    = {
 274                 .platform_data = &anubis_ide_platdata,
 275                 .coherent_dma_mask = ~0,
 276         },
 277 };
 278
 279 static struct resource anubis_ide1_resource[] = {
 280         {
 281                 .start  = S3C2410_CS4,
 282                 .end    = S3C2410_CS4 + (8*32) - 1,
 283                 .flags  = IORESOURCE_MEM,
 284         }, {
 285                 .start  = S3C2410_CS4 + (1<<26) + (6*32),
 286                 .end    = S3C2410_CS4 + (1<<26) + (7*32) - 1,
 287                 .flags  = IORESOURCE_MEM,
 288         }, {
 289                 .start  = IRQ_IDE0,
 290                 .end    = IRQ_IDE0,
 291                 .flags  = IORESOURCE_IRQ,
 292         },
 293 };
 294
 295 static struct platform_device anubis_device_ide1 = {
 296         .name           = "pata_platform",
 297         .id             = 1,
 298         .num_resources  = ARRAY_SIZE(anubis_ide1_resource),
 299         .resource       = anubis_ide1_resource,
 300         .dev    = {
 301                 .platform_data = &anubis_ide_platdata,
 302                 .coherent_dma_mask = ~0,
 303         },
 304 };
 305
 306 /* Asix AX88796 10/100 ethernet controller */
 307
 308 static struct ax_plat_data anubis_asix_platdata = {
 309         .flags          = AXFLG_MAC_FROMDEV,
 310         .wordlength     = 2,
 311         .dcr_val        = 0x48,
 312         .rcr_val        = 0x40,
 313 };
 314
 315 static struct resource anubis_asix_resource[] = {
 316         [0] = {
 317                 .start = S3C2410_CS5,
 318                 .end   = S3C2410_CS5 + (0x20 * 0x20) -1,
 319                 .flags = IORESOURCE_MEM
 320         },
 321         [1] = {
 322                 .start = IRQ_ASIX,
 323                 .end   = IRQ_ASIX,
 324                 .flags = IORESOURCE_IRQ
 325         }
 326 };
 327
 328 static struct platform_device anubis_device_asix = {
 329         .name           = "ax88796",
 330         .id             = 0,
 331         .num_resources  = ARRAY_SIZE(anubis_asix_resource),
 332         .resource       = anubis_asix_resource,
 333         .dev            = {
 334                 .platform_data = &anubis_asix_platdata,
 335         }
 336 };
 337
 338 /* SM501 */
 339
 340 static struct resource anubis_sm501_resource[] = {
 341         [0] = {
 342                 .start  = S3C2410_CS2,
 343                 .end    = S3C2410_CS2 + SZ_8M,
 344                 .flags  = IORESOURCE_MEM,
 345         },
 346         [1] = {
 347                 .start  = S3C2410_CS2 + SZ_64M - SZ_2M,
 348                 .end    = S3C2410_CS2 + SZ_64M - 1,
 349                 .flags  = IORESOURCE_MEM,
 350         },
 351         [2] = {
 352                 .start  = IRQ_EINT0,
 353                 .end    = IRQ_EINT0,
 354                 .flags  = IORESOURCE_IRQ,
 355         },
 356 };
 357
 358 static struct sm501_initdata anubis_sm501_initdata = {
 359         .gpio_high      = {
 360                 .set    = 0x3F000000,           /* 24bit panel */
 361                 .mask   = 0x0,
 362         },
 363         .misc_timing    = {
 364                 .set    = 0x010100,             /* SDRAM timing */
 365                 .mask   = 0x1F1F00,
 366         },
 367         .misc_control   = {
 368                 .set    = SM501_MISC_PNL_24BIT,
 369                 .mask   = 0,
 370         },
 371
 372         .devices        = SM501_USE_GPIO,
 373
 374         /* set the SDRAM and bus clocks */
 375         .mclk           = 72 * MHZ,
 376         .m1xclk         = 144 * MHZ,
 377 };
 378
 379 static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
 380         [0] = {
 381                 .bus_num        = 1,
 382                 .pin_scl        = 44,
 383                 .pin_sda        = 45,
 384         },
 385         [1] = {
 386                 .bus_num        = 2,
 387                 .pin_scl        = 40,
 388                 .pin_sda        = 41,
 389         },
 390 };
 391
 392 static struct sm501_platdata anubis_sm501_platdata = {
 393         .init           = &anubis_sm501_initdata,
 394         .gpio_base      = -1,
 395         .gpio_i2c       = anubis_sm501_gpio_i2c,
 396         .gpio_i2c_nr    = ARRAY_SIZE(anubis_sm501_gpio_i2c),
 397 };
 398
 399 static struct platform_device anubis_device_sm501 = {
 400         .name           = "sm501",
 401         .id             = 0,
 402         .num_resources  = ARRAY_SIZE(anubis_sm501_resource),
 403         .resource       = anubis_sm501_resource,
 404         .dev            = {
 405                 .platform_data = &anubis_sm501_platdata,
 406         },
 407 };
 408
 409 /* Standard Anubis devices */
 410
 411 static struct platform_device *anubis_devices[] __initdata = {
 412         &s3c_device_ohci,
 413         &s3c_device_wdt,
 414         &s3c_device_adc,
 415         &s3c_device_i2c0,
 416         &s3c_device_rtc,
 417         &s3c_device_nand,
 418         &anubis_device_ide0,
 419         &anubis_device_ide1,
 420         &anubis_device_asix,
 421         &anubis_device_sm501,
 422 };
 423
 424 static struct clk *anubis_clocks[] __initdata = {
 425         &s3c24xx_dclk0,
 426         &s3c24xx_dclk1,
 427         &s3c24xx_clkout0,
 428         &s3c24xx_clkout1,
 429         &s3c24xx_uclk,
 430 };
 431
 432 /* I2C devices. */
 433
 434 static struct i2c_board_info anubis_i2c_devs[] __initdata = {
 435         {
 436                 I2C_BOARD_INFO("tps65011", 0x48),
 437                 .irq    = IRQ_EINT20,
 438         }
 439 };
 440
 441 /* Audio setup */
 442 static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
 443         .have_mic       = 1,
 444         .have_lout      = 1,
 445         .output_cdclk   = 1,
 446         .use_mpllin     = 1,
 447         .amp_gpio       = S3C2410_GPB(2),
 448         .amp_gain[0]    = S3C2410_GPD(10),
 449         .amp_gain[1]    = S3C2410_GPD(11),
 450 };
 451
 452 static void __init anubis_map_io(void)
 453 {
 454         /* initialise the clocks */
 455
 456         s3c24xx_dclk0.parent = &clk_upll;
 457         s3c24xx_dclk0.rate   = 12*1000*1000;
 458
 459         s3c24xx_dclk1.parent = &clk_upll;
 460         s3c24xx_dclk1.rate   = 24*1000*1000;
 461
 462         s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
 463         s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
 464
 465         s3c24xx_uclk.parent  = &s3c24xx_clkout1;
 466
 467         s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
 468
 469         s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
 470         s3c24xx_init_clocks(0);
 471         s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
 472
 473         /* check for the newer revision boards with large page nand */
 474
 475         if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) {
 476                 printk(KERN_INFO "ANUBIS-B detected (revision %d)\n",
 477                        __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK);
 478                 anubis_nand_sets[0].partitions = anubis_default_nand_part_large;
 479                 anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
 480         } else {
 481                 /* ensure that the GPIO is setup */
 482                 s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
 483         }
 484 }
 485
 486 static void __init anubis_init(void)
 487 {
 488         s3c_i2c0_set_platdata(NULL);
 489         s3c_nand_set_platdata(&anubis_nand_info);
 490         simtec_audio_add(NULL, false, &anubis_audio);
 491
 492         platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
 493
 494         i2c_register_board_info(0, anubis_i2c_devs,
 495                                 ARRAY_SIZE(anubis_i2c_devs));
 496 }
 497
 498
 499 MACHINE_START(ANUBIS, "Simtec-Anubis")
 500         /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
 501         .boot_params    = S3C2410_SDRAM_PA + 0x100,
 502         .map_io         = anubis_map_io,
 503         .init_machine   = anubis_init,
 504         .init_irq       = s3c24xx_init_irq,
 505         .timer          = &s3c24xx_timer,
 506 MACHINE_END