smsc911x: Add spinlocks around registers access
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / hwmon / f75375s.c
blobbad2cf3ef4a448aa76a72033b527647c6434f9d3
1 /*
2 * f75375s.c - driver for the Fintek F75375/SP and F75373
3 * hardware monitoring features
4 * Copyright (C) 2006-2007 Riku Voipio
6 * Datasheets available at:
8 * f75375:
9 * http://www.fintek.com.tw/files/productfiles/2005111152950.pdf
11 * f75373:
12 * http://www.fintek.com.tw/files/productfiles/2005111153128.pdf
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License as published by
16 * the Free Software Foundation; either version 2 of the License, or
17 * (at your option) any later version.
19 * This program is distributed in the hope that it will be useful,
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22 * GNU General Public License for more details.
24 * You should have received a copy of the GNU General Public License
25 * along with this program; if not, write to the Free Software
26 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
30 #include <linux/module.h>
31 #include <linux/jiffies.h>
32 #include <linux/hwmon.h>
33 #include <linux/hwmon-sysfs.h>
34 #include <linux/i2c.h>
35 #include <linux/err.h>
36 #include <linux/mutex.h>
37 #include <linux/f75375s.h>
38 #include <linux/slab.h>
40 /* Addresses to scan */
41 static const unsigned short normal_i2c[] = { 0x2d, 0x2e, I2C_CLIENT_END };
43 enum chips { f75373, f75375 };
45 /* Fintek F75375 registers */
46 #define F75375_REG_CONFIG0 0x0
47 #define F75375_REG_CONFIG1 0x1
48 #define F75375_REG_CONFIG2 0x2
49 #define F75375_REG_CONFIG3 0x3
50 #define F75375_REG_ADDR 0x4
51 #define F75375_REG_INTR 0x31
52 #define F75375_CHIP_ID 0x5A
53 #define F75375_REG_VERSION 0x5C
54 #define F75375_REG_VENDOR 0x5D
55 #define F75375_REG_FAN_TIMER 0x60
57 #define F75375_REG_VOLT(nr) (0x10 + (nr))
58 #define F75375_REG_VOLT_HIGH(nr) (0x20 + (nr) * 2)
59 #define F75375_REG_VOLT_LOW(nr) (0x21 + (nr) * 2)
61 #define F75375_REG_TEMP(nr) (0x14 + (nr))
62 #define F75375_REG_TEMP_HIGH(nr) (0x28 + (nr) * 2)
63 #define F75375_REG_TEMP_HYST(nr) (0x29 + (nr) * 2)
65 #define F75375_REG_FAN(nr) (0x16 + (nr) * 2)
66 #define F75375_REG_FAN_MIN(nr) (0x2C + (nr) * 2)
67 #define F75375_REG_FAN_FULL(nr) (0x70 + (nr) * 0x10)
68 #define F75375_REG_FAN_PWM_DUTY(nr) (0x76 + (nr) * 0x10)
69 #define F75375_REG_FAN_PWM_CLOCK(nr) (0x7D + (nr) * 0x10)
71 #define F75375_REG_FAN_EXP(nr) (0x74 + (nr) * 0x10)
72 #define F75375_REG_FAN_B_TEMP(nr, step) ((0xA0 + (nr) * 0x10) + (step))
73 #define F75375_REG_FAN_B_SPEED(nr, step) \
74 ((0xA5 + (nr) * 0x10) + (step) * 2)
76 #define F75375_REG_PWM1_RAISE_DUTY 0x69
77 #define F75375_REG_PWM2_RAISE_DUTY 0x6A
78 #define F75375_REG_PWM1_DROP_DUTY 0x6B
79 #define F75375_REG_PWM2_DROP_DUTY 0x6C
81 #define FAN_CTRL_LINEAR(nr) (4 + nr)
82 #define FAN_CTRL_MODE(nr) (5 + ((nr) * 2))
85 * Data structures and manipulation thereof
88 struct f75375_data {
89 unsigned short addr;
90 struct device *hwmon_dev;
92 const char *name;
93 int kind;
94 struct mutex update_lock; /* protect register access */
95 char valid;
96 unsigned long last_updated; /* In jiffies */
97 unsigned long last_limits; /* In jiffies */
99 /* Register values */
100 u8 in[4];
101 u8 in_max[4];
102 u8 in_min[4];
103 u16 fan[2];
104 u16 fan_min[2];
105 u16 fan_full[2];
106 u16 fan_exp[2];
107 u8 fan_timer;
108 u8 pwm[2];
109 u8 pwm_mode[2];
110 u8 pwm_enable[2];
111 s8 temp[2];
112 s8 temp_high[2];
113 s8 temp_max_hyst[2];
116 static int f75375_detect(struct i2c_client *client,
117 struct i2c_board_info *info);
118 static int f75375_probe(struct i2c_client *client,
119 const struct i2c_device_id *id);
120 static int f75375_remove(struct i2c_client *client);
122 static const struct i2c_device_id f75375_id[] = {
123 { "f75373", f75373 },
124 { "f75375", f75375 },
127 MODULE_DEVICE_TABLE(i2c, f75375_id);
129 static struct i2c_driver f75375_driver = {
130 .class = I2C_CLASS_HWMON,
131 .driver = {
132 .name = "f75375",
134 .probe = f75375_probe,
135 .remove = f75375_remove,
136 .id_table = f75375_id,
137 .detect = f75375_detect,
138 .address_list = normal_i2c,
141 static inline int f75375_read8(struct i2c_client *client, u8 reg)
143 return i2c_smbus_read_byte_data(client, reg);
146 /* in most cases, should be called while holding update_lock */
147 static inline u16 f75375_read16(struct i2c_client *client, u8 reg)
149 return ((i2c_smbus_read_byte_data(client, reg) << 8)
150 | i2c_smbus_read_byte_data(client, reg + 1));
153 static inline void f75375_write8(struct i2c_client *client, u8 reg,
154 u8 value)
156 i2c_smbus_write_byte_data(client, reg, value);
159 static inline void f75375_write16(struct i2c_client *client, u8 reg,
160 u16 value)
162 int err = i2c_smbus_write_byte_data(client, reg, (value << 8));
163 if (err)
164 return;
165 i2c_smbus_write_byte_data(client, reg + 1, (value & 0xFF));
168 static struct f75375_data *f75375_update_device(struct device *dev)
170 struct i2c_client *client = to_i2c_client(dev);
171 struct f75375_data *data = i2c_get_clientdata(client);
172 int nr;
174 mutex_lock(&data->update_lock);
176 /* Limit registers cache is refreshed after 60 seconds */
177 if (time_after(jiffies, data->last_limits + 60 * HZ)
178 || !data->valid) {
179 for (nr = 0; nr < 2; nr++) {
180 data->temp_high[nr] =
181 f75375_read8(client, F75375_REG_TEMP_HIGH(nr));
182 data->temp_max_hyst[nr] =
183 f75375_read8(client, F75375_REG_TEMP_HYST(nr));
184 data->fan_full[nr] =
185 f75375_read16(client, F75375_REG_FAN_FULL(nr));
186 data->fan_min[nr] =
187 f75375_read16(client, F75375_REG_FAN_MIN(nr));
188 data->fan_exp[nr] =
189 f75375_read16(client, F75375_REG_FAN_EXP(nr));
190 data->pwm[nr] = f75375_read8(client,
191 F75375_REG_FAN_PWM_DUTY(nr));
194 for (nr = 0; nr < 4; nr++) {
195 data->in_max[nr] =
196 f75375_read8(client, F75375_REG_VOLT_HIGH(nr));
197 data->in_min[nr] =
198 f75375_read8(client, F75375_REG_VOLT_LOW(nr));
200 data->fan_timer = f75375_read8(client, F75375_REG_FAN_TIMER);
201 data->last_limits = jiffies;
204 /* Measurement registers cache is refreshed after 2 second */
205 if (time_after(jiffies, data->last_updated + 2 * HZ)
206 || !data->valid) {
207 for (nr = 0; nr < 2; nr++) {
208 data->temp[nr] =
209 f75375_read8(client, F75375_REG_TEMP(nr));
210 data->fan[nr] =
211 f75375_read16(client, F75375_REG_FAN(nr));
213 for (nr = 0; nr < 4; nr++)
214 data->in[nr] =
215 f75375_read8(client, F75375_REG_VOLT(nr));
217 data->last_updated = jiffies;
218 data->valid = 1;
221 mutex_unlock(&data->update_lock);
222 return data;
225 static inline u16 rpm_from_reg(u16 reg)
227 if (reg == 0 || reg == 0xffff)
228 return 0;
229 return (1500000 / reg);
232 static inline u16 rpm_to_reg(int rpm)
234 if (rpm < 367 || rpm > 0xffff)
235 return 0xffff;
236 return (1500000 / rpm);
239 static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
240 const char *buf, size_t count)
242 int nr = to_sensor_dev_attr(attr)->index;
243 struct i2c_client *client = to_i2c_client(dev);
244 struct f75375_data *data = i2c_get_clientdata(client);
245 int val = simple_strtoul(buf, NULL, 10);
247 mutex_lock(&data->update_lock);
248 data->fan_min[nr] = rpm_to_reg(val);
249 f75375_write16(client, F75375_REG_FAN_MIN(nr), data->fan_min[nr]);
250 mutex_unlock(&data->update_lock);
251 return count;
254 static ssize_t set_fan_exp(struct device *dev, struct device_attribute *attr,
255 const char *buf, size_t count)
257 int nr = to_sensor_dev_attr(attr)->index;
258 struct i2c_client *client = to_i2c_client(dev);
259 struct f75375_data *data = i2c_get_clientdata(client);
260 int val = simple_strtoul(buf, NULL, 10);
262 mutex_lock(&data->update_lock);
263 data->fan_exp[nr] = rpm_to_reg(val);
264 f75375_write16(client, F75375_REG_FAN_EXP(nr), data->fan_exp[nr]);
265 mutex_unlock(&data->update_lock);
266 return count;
269 static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
270 const char *buf, size_t count)
272 int nr = to_sensor_dev_attr(attr)->index;
273 struct i2c_client *client = to_i2c_client(dev);
274 struct f75375_data *data = i2c_get_clientdata(client);
275 int val = simple_strtoul(buf, NULL, 10);
277 mutex_lock(&data->update_lock);
278 data->pwm[nr] = SENSORS_LIMIT(val, 0, 255);
279 f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), data->pwm[nr]);
280 mutex_unlock(&data->update_lock);
281 return count;
284 static ssize_t show_pwm_enable(struct device *dev, struct device_attribute
285 *attr, char *buf)
287 int nr = to_sensor_dev_attr(attr)->index;
288 struct f75375_data *data = f75375_update_device(dev);
289 return sprintf(buf, "%d\n", data->pwm_enable[nr]);
292 static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
294 struct f75375_data *data = i2c_get_clientdata(client);
295 u8 fanmode;
297 if (val < 0 || val > 4)
298 return -EINVAL;
300 fanmode = f75375_read8(client, F75375_REG_FAN_TIMER);
301 fanmode = ~(3 << FAN_CTRL_MODE(nr));
303 switch (val) {
304 case 0: /* Full speed */
305 fanmode |= (3 << FAN_CTRL_MODE(nr));
306 data->pwm[nr] = 255;
307 f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
308 data->pwm[nr]);
309 break;
310 case 1: /* PWM */
311 fanmode |= (3 << FAN_CTRL_MODE(nr));
312 break;
313 case 2: /* AUTOMATIC*/
314 fanmode |= (2 << FAN_CTRL_MODE(nr));
315 break;
316 case 3: /* fan speed */
317 break;
319 f75375_write8(client, F75375_REG_FAN_TIMER, fanmode);
320 data->pwm_enable[nr] = val;
321 return 0;
324 static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr,
325 const char *buf, size_t count)
327 int nr = to_sensor_dev_attr(attr)->index;
328 struct i2c_client *client = to_i2c_client(dev);
329 struct f75375_data *data = i2c_get_clientdata(client);
330 int val = simple_strtoul(buf, NULL, 10);
331 int err = 0;
333 mutex_lock(&data->update_lock);
334 err = set_pwm_enable_direct(client, nr, val);
335 mutex_unlock(&data->update_lock);
336 return err ? err : count;
339 static ssize_t set_pwm_mode(struct device *dev, struct device_attribute *attr,
340 const char *buf, size_t count)
342 int nr = to_sensor_dev_attr(attr)->index;
343 struct i2c_client *client = to_i2c_client(dev);
344 struct f75375_data *data = i2c_get_clientdata(client);
345 int val = simple_strtoul(buf, NULL, 10);
346 u8 conf = 0;
348 if (!(val == 0 || val == 1))
349 return -EINVAL;
351 mutex_lock(&data->update_lock);
352 conf = f75375_read8(client, F75375_REG_CONFIG1);
353 conf = ~(1 << FAN_CTRL_LINEAR(nr));
355 if (val == 0)
356 conf |= (1 << FAN_CTRL_LINEAR(nr)) ;
358 f75375_write8(client, F75375_REG_CONFIG1, conf);
359 data->pwm_mode[nr] = val;
360 mutex_unlock(&data->update_lock);
361 return count;
364 static ssize_t show_pwm(struct device *dev, struct device_attribute
365 *attr, char *buf)
367 int nr = to_sensor_dev_attr(attr)->index;
368 struct f75375_data *data = f75375_update_device(dev);
369 return sprintf(buf, "%d\n", data->pwm[nr]);
372 static ssize_t show_pwm_mode(struct device *dev, struct device_attribute
373 *attr, char *buf)
375 int nr = to_sensor_dev_attr(attr)->index;
376 struct f75375_data *data = f75375_update_device(dev);
377 return sprintf(buf, "%d\n", data->pwm_mode[nr]);
380 #define VOLT_FROM_REG(val) ((val) * 8)
381 #define VOLT_TO_REG(val) ((val) / 8)
383 static ssize_t show_in(struct device *dev, struct device_attribute *attr,
384 char *buf)
386 int nr = to_sensor_dev_attr(attr)->index;
387 struct f75375_data *data = f75375_update_device(dev);
388 return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in[nr]));
391 static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
392 char *buf)
394 int nr = to_sensor_dev_attr(attr)->index;
395 struct f75375_data *data = f75375_update_device(dev);
396 return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in_max[nr]));
399 static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
400 char *buf)
402 int nr = to_sensor_dev_attr(attr)->index;
403 struct f75375_data *data = f75375_update_device(dev);
404 return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in_min[nr]));
407 static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
408 const char *buf, size_t count)
410 int nr = to_sensor_dev_attr(attr)->index;
411 struct i2c_client *client = to_i2c_client(dev);
412 struct f75375_data *data = i2c_get_clientdata(client);
413 int val = simple_strtoul(buf, NULL, 10);
414 val = SENSORS_LIMIT(VOLT_TO_REG(val), 0, 0xff);
415 mutex_lock(&data->update_lock);
416 data->in_max[nr] = val;
417 f75375_write8(client, F75375_REG_VOLT_HIGH(nr), data->in_max[nr]);
418 mutex_unlock(&data->update_lock);
419 return count;
422 static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
423 const char *buf, size_t count)
425 int nr = to_sensor_dev_attr(attr)->index;
426 struct i2c_client *client = to_i2c_client(dev);
427 struct f75375_data *data = i2c_get_clientdata(client);
428 int val = simple_strtoul(buf, NULL, 10);
429 val = SENSORS_LIMIT(VOLT_TO_REG(val), 0, 0xff);
430 mutex_lock(&data->update_lock);
431 data->in_min[nr] = val;
432 f75375_write8(client, F75375_REG_VOLT_LOW(nr), data->in_min[nr]);
433 mutex_unlock(&data->update_lock);
434 return count;
436 #define TEMP_FROM_REG(val) ((val) * 1000)
437 #define TEMP_TO_REG(val) ((val) / 1000)
439 static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
440 char *buf)
442 int nr = to_sensor_dev_attr(attr)->index;
443 struct f75375_data *data = f75375_update_device(dev);
444 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr]));
447 static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
448 char *buf)
450 int nr = to_sensor_dev_attr(attr)->index;
451 struct f75375_data *data = f75375_update_device(dev);
452 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr]));
455 static ssize_t show_temp_max_hyst(struct device *dev,
456 struct device_attribute *attr, char *buf)
458 int nr = to_sensor_dev_attr(attr)->index;
459 struct f75375_data *data = f75375_update_device(dev);
460 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max_hyst[nr]));
463 static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
464 const char *buf, size_t count)
466 int nr = to_sensor_dev_attr(attr)->index;
467 struct i2c_client *client = to_i2c_client(dev);
468 struct f75375_data *data = i2c_get_clientdata(client);
469 int val = simple_strtol(buf, NULL, 10);
470 val = SENSORS_LIMIT(TEMP_TO_REG(val), 0, 127);
471 mutex_lock(&data->update_lock);
472 data->temp_high[nr] = val;
473 f75375_write8(client, F75375_REG_TEMP_HIGH(nr), data->temp_high[nr]);
474 mutex_unlock(&data->update_lock);
475 return count;
478 static ssize_t set_temp_max_hyst(struct device *dev,
479 struct device_attribute *attr, const char *buf, size_t count)
481 int nr = to_sensor_dev_attr(attr)->index;
482 struct i2c_client *client = to_i2c_client(dev);
483 struct f75375_data *data = i2c_get_clientdata(client);
484 int val = simple_strtol(buf, NULL, 10);
485 val = SENSORS_LIMIT(TEMP_TO_REG(val), 0, 127);
486 mutex_lock(&data->update_lock);
487 data->temp_max_hyst[nr] = val;
488 f75375_write8(client, F75375_REG_TEMP_HYST(nr),
489 data->temp_max_hyst[nr]);
490 mutex_unlock(&data->update_lock);
491 return count;
494 #define show_fan(thing) \
495 static ssize_t show_##thing(struct device *dev, struct device_attribute *attr, \
496 char *buf)\
498 int nr = to_sensor_dev_attr(attr)->index;\
499 struct f75375_data *data = f75375_update_device(dev); \
500 return sprintf(buf, "%d\n", rpm_from_reg(data->thing[nr])); \
503 show_fan(fan);
504 show_fan(fan_min);
505 show_fan(fan_full);
506 show_fan(fan_exp);
508 static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in, NULL, 0);
509 static SENSOR_DEVICE_ATTR(in0_max, S_IRUGO|S_IWUSR,
510 show_in_max, set_in_max, 0);
511 static SENSOR_DEVICE_ATTR(in0_min, S_IRUGO|S_IWUSR,
512 show_in_min, set_in_min, 0);
513 static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1);
514 static SENSOR_DEVICE_ATTR(in1_max, S_IRUGO|S_IWUSR,
515 show_in_max, set_in_max, 1);
516 static SENSOR_DEVICE_ATTR(in1_min, S_IRUGO|S_IWUSR,
517 show_in_min, set_in_min, 1);
518 static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 2);
519 static SENSOR_DEVICE_ATTR(in2_max, S_IRUGO|S_IWUSR,
520 show_in_max, set_in_max, 2);
521 static SENSOR_DEVICE_ATTR(in2_min, S_IRUGO|S_IWUSR,
522 show_in_min, set_in_min, 2);
523 static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 3);
524 static SENSOR_DEVICE_ATTR(in3_max, S_IRUGO|S_IWUSR,
525 show_in_max, set_in_max, 3);
526 static SENSOR_DEVICE_ATTR(in3_min, S_IRUGO|S_IWUSR,
527 show_in_min, set_in_min, 3);
528 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
529 static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO|S_IWUSR,
530 show_temp_max_hyst, set_temp_max_hyst, 0);
531 static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO|S_IWUSR,
532 show_temp_max, set_temp_max, 0);
533 static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
534 static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IRUGO|S_IWUSR,
535 show_temp_max_hyst, set_temp_max_hyst, 1);
536 static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO|S_IWUSR,
537 show_temp_max, set_temp_max, 1);
538 static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
539 static SENSOR_DEVICE_ATTR(fan1_full, S_IRUGO, show_fan_full, NULL, 0);
540 static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO|S_IWUSR,
541 show_fan_min, set_fan_min, 0);
542 static SENSOR_DEVICE_ATTR(fan1_exp, S_IRUGO|S_IWUSR,
543 show_fan_exp, set_fan_exp, 0);
544 static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
545 static SENSOR_DEVICE_ATTR(fan2_full, S_IRUGO, show_fan_full, NULL, 1);
546 static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO|S_IWUSR,
547 show_fan_min, set_fan_min, 1);
548 static SENSOR_DEVICE_ATTR(fan2_exp, S_IRUGO|S_IWUSR,
549 show_fan_exp, set_fan_exp, 1);
550 static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO|S_IWUSR,
551 show_pwm, set_pwm, 0);
552 static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR,
553 show_pwm_enable, set_pwm_enable, 0);
554 static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO,
555 show_pwm_mode, set_pwm_mode, 0);
556 static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR,
557 show_pwm, set_pwm, 1);
558 static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO|S_IWUSR,
559 show_pwm_enable, set_pwm_enable, 1);
560 static SENSOR_DEVICE_ATTR(pwm2_mode, S_IRUGO,
561 show_pwm_mode, set_pwm_mode, 1);
563 static struct attribute *f75375_attributes[] = {
564 &sensor_dev_attr_temp1_input.dev_attr.attr,
565 &sensor_dev_attr_temp1_max.dev_attr.attr,
566 &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
567 &sensor_dev_attr_temp2_input.dev_attr.attr,
568 &sensor_dev_attr_temp2_max.dev_attr.attr,
569 &sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
570 &sensor_dev_attr_fan1_input.dev_attr.attr,
571 &sensor_dev_attr_fan1_full.dev_attr.attr,
572 &sensor_dev_attr_fan1_min.dev_attr.attr,
573 &sensor_dev_attr_fan1_exp.dev_attr.attr,
574 &sensor_dev_attr_fan2_input.dev_attr.attr,
575 &sensor_dev_attr_fan2_full.dev_attr.attr,
576 &sensor_dev_attr_fan2_min.dev_attr.attr,
577 &sensor_dev_attr_fan2_exp.dev_attr.attr,
578 &sensor_dev_attr_pwm1.dev_attr.attr,
579 &sensor_dev_attr_pwm1_enable.dev_attr.attr,
580 &sensor_dev_attr_pwm1_mode.dev_attr.attr,
581 &sensor_dev_attr_pwm2.dev_attr.attr,
582 &sensor_dev_attr_pwm2_enable.dev_attr.attr,
583 &sensor_dev_attr_pwm2_mode.dev_attr.attr,
584 &sensor_dev_attr_in0_input.dev_attr.attr,
585 &sensor_dev_attr_in0_max.dev_attr.attr,
586 &sensor_dev_attr_in0_min.dev_attr.attr,
587 &sensor_dev_attr_in1_input.dev_attr.attr,
588 &sensor_dev_attr_in1_max.dev_attr.attr,
589 &sensor_dev_attr_in1_min.dev_attr.attr,
590 &sensor_dev_attr_in2_input.dev_attr.attr,
591 &sensor_dev_attr_in2_max.dev_attr.attr,
592 &sensor_dev_attr_in2_min.dev_attr.attr,
593 &sensor_dev_attr_in3_input.dev_attr.attr,
594 &sensor_dev_attr_in3_max.dev_attr.attr,
595 &sensor_dev_attr_in3_min.dev_attr.attr,
596 NULL
599 static const struct attribute_group f75375_group = {
600 .attrs = f75375_attributes,
603 static void f75375_init(struct i2c_client *client, struct f75375_data *data,
604 struct f75375s_platform_data *f75375s_pdata)
606 int nr;
607 set_pwm_enable_direct(client, 0, f75375s_pdata->pwm_enable[0]);
608 set_pwm_enable_direct(client, 1, f75375s_pdata->pwm_enable[1]);
609 for (nr = 0; nr < 2; nr++) {
610 data->pwm[nr] = SENSORS_LIMIT(f75375s_pdata->pwm[nr], 0, 255);
611 f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
612 data->pwm[nr]);
617 static int f75375_probe(struct i2c_client *client,
618 const struct i2c_device_id *id)
620 struct f75375_data *data;
621 struct f75375s_platform_data *f75375s_pdata = client->dev.platform_data;
622 int err;
624 if (!i2c_check_functionality(client->adapter,
625 I2C_FUNC_SMBUS_BYTE_DATA))
626 return -EIO;
627 if (!(data = kzalloc(sizeof(struct f75375_data), GFP_KERNEL)))
628 return -ENOMEM;
630 i2c_set_clientdata(client, data);
631 mutex_init(&data->update_lock);
632 data->kind = id->driver_data;
634 if ((err = sysfs_create_group(&client->dev.kobj, &f75375_group)))
635 goto exit_free;
637 if (data->kind == f75375) {
638 err = sysfs_chmod_file(&client->dev.kobj,
639 &sensor_dev_attr_pwm1_mode.dev_attr.attr,
640 S_IRUGO | S_IWUSR);
641 if (err)
642 goto exit_remove;
643 err = sysfs_chmod_file(&client->dev.kobj,
644 &sensor_dev_attr_pwm2_mode.dev_attr.attr,
645 S_IRUGO | S_IWUSR);
646 if (err)
647 goto exit_remove;
650 data->hwmon_dev = hwmon_device_register(&client->dev);
651 if (IS_ERR(data->hwmon_dev)) {
652 err = PTR_ERR(data->hwmon_dev);
653 goto exit_remove;
656 if (f75375s_pdata != NULL)
657 f75375_init(client, data, f75375s_pdata);
659 return 0;
661 exit_remove:
662 sysfs_remove_group(&client->dev.kobj, &f75375_group);
663 exit_free:
664 kfree(data);
665 i2c_set_clientdata(client, NULL);
666 return err;
669 static int f75375_remove(struct i2c_client *client)
671 struct f75375_data *data = i2c_get_clientdata(client);
672 hwmon_device_unregister(data->hwmon_dev);
673 sysfs_remove_group(&client->dev.kobj, &f75375_group);
674 kfree(data);
675 i2c_set_clientdata(client, NULL);
676 return 0;
679 /* Return 0 if detection is successful, -ENODEV otherwise */
680 static int f75375_detect(struct i2c_client *client,
681 struct i2c_board_info *info)
683 struct i2c_adapter *adapter = client->adapter;
684 u16 vendid, chipid;
685 u8 version;
686 const char *name;
688 vendid = f75375_read16(client, F75375_REG_VENDOR);
689 chipid = f75375_read16(client, F75375_CHIP_ID);
690 if (chipid == 0x0306 && vendid == 0x1934)
691 name = "f75375";
692 else if (chipid == 0x0204 && vendid == 0x1934)
693 name = "f75373";
694 else
695 return -ENODEV;
697 version = f75375_read8(client, F75375_REG_VERSION);
698 dev_info(&adapter->dev, "found %s version: %02X\n", name, version);
699 strlcpy(info->type, name, I2C_NAME_SIZE);
701 return 0;
704 static int __init sensors_f75375_init(void)
706 return i2c_add_driver(&f75375_driver);
709 static void __exit sensors_f75375_exit(void)
711 i2c_del_driver(&f75375_driver);
714 MODULE_AUTHOR("Riku Voipio");
715 MODULE_LICENSE("GPL");
716 MODULE_DESCRIPTION("F75373/F75375 hardware monitoring driver");
718 module_init(sensors_f75375_init);
719 module_exit(sensors_f75375_exit);