plat-nomadik: support secondary GPIO interrupts
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / sound / soc / samsung / smartq_wm8987.c
blob61e2b5219d421093e7cb771c824f0ec584243ae3
1 /* sound/soc/samsung/smartq_wm8987.c
3 * Copyright 2010 Maurus Cuelenaere <mcuelenaere@gmail.com>
5 * Based on smdk6410_wm8987.c
6 * Copyright 2007 Wolfson Microelectronics PLC. - linux@wolfsonmicro.com
7 * Graeme Gregory - graeme.gregory@wolfsonmicro.com
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms of the GNU General Public License as published by the
11 * Free Software Foundation; either version 2 of the License, or (at your
12 * option) any later version.
16 #include <linux/module.h>
17 #include <linux/platform_device.h>
18 #include <linux/gpio.h>
20 #include <sound/pcm.h>
21 #include <sound/pcm_params.h>
22 #include <sound/soc.h>
23 #include <sound/jack.h>
25 #include <asm/mach-types.h>
27 #include "dma.h"
28 #include "i2s.h"
30 #include "../codecs/wm8750.h"
33 * WM8987 is register compatible with WM8750, so using that as base driver.
36 static struct snd_soc_card snd_soc_smartq;
38 static int smartq_hifi_hw_params(struct snd_pcm_substream *substream,
39 struct snd_pcm_hw_params *params)
41 struct snd_soc_pcm_runtime *rtd = substream->private_data;
42 struct snd_soc_dai *codec_dai = rtd->codec_dai;
43 struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
44 unsigned int clk = 0;
45 int ret;
47 switch (params_rate(params)) {
48 case 8000:
49 case 16000:
50 case 32000:
51 case 48000:
52 case 96000:
53 clk = 12288000;
54 break;
55 case 11025:
56 case 22050:
57 case 44100:
58 case 88200:
59 clk = 11289600;
60 break;
63 /* set codec DAI configuration */
64 ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
65 SND_SOC_DAIFMT_NB_NF |
66 SND_SOC_DAIFMT_CBS_CFS);
67 if (ret < 0)
68 return ret;
70 /* set cpu DAI configuration */
71 ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
72 SND_SOC_DAIFMT_NB_NF |
73 SND_SOC_DAIFMT_CBS_CFS);
74 if (ret < 0)
75 return ret;
77 /* Use PCLK for I2S signal generation */
78 ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_RCLKSRC_0,
79 0, SND_SOC_CLOCK_IN);
80 if (ret < 0)
81 return ret;
83 /* Gate the RCLK output on PAD */
84 ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_CDCLK,
85 0, SND_SOC_CLOCK_IN);
86 if (ret < 0)
87 return ret;
89 /* set the codec system clock for DAC and ADC */
90 ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk,
91 SND_SOC_CLOCK_IN);
92 if (ret < 0)
93 return ret;
95 return 0;
99 * SmartQ WM8987 HiFi DAI operations.
101 static struct snd_soc_ops smartq_hifi_ops = {
102 .hw_params = smartq_hifi_hw_params,
105 static struct snd_soc_jack smartq_jack;
107 static struct snd_soc_jack_pin smartq_jack_pins[] = {
108 /* Disable speaker when headphone is plugged in */
110 .pin = "Internal Speaker",
111 .mask = SND_JACK_HEADPHONE,
115 static struct snd_soc_jack_gpio smartq_jack_gpios[] = {
117 .gpio = S3C64XX_GPL(12),
118 .name = "headphone detect",
119 .report = SND_JACK_HEADPHONE,
120 .debounce_time = 200,
124 static const struct snd_kcontrol_new wm8987_smartq_controls[] = {
125 SOC_DAPM_PIN_SWITCH("Internal Speaker"),
126 SOC_DAPM_PIN_SWITCH("Headphone Jack"),
127 SOC_DAPM_PIN_SWITCH("Internal Mic"),
130 static int smartq_speaker_event(struct snd_soc_dapm_widget *w,
131 struct snd_kcontrol *k,
132 int event)
134 gpio_set_value(S3C64XX_GPK(12), SND_SOC_DAPM_EVENT_OFF(event));
136 return 0;
139 static const struct snd_soc_dapm_widget wm8987_dapm_widgets[] = {
140 SND_SOC_DAPM_SPK("Internal Speaker", smartq_speaker_event),
141 SND_SOC_DAPM_HP("Headphone Jack", NULL),
142 SND_SOC_DAPM_MIC("Internal Mic", NULL),
145 static const struct snd_soc_dapm_route audio_map[] = {
146 {"Headphone Jack", NULL, "LOUT2"},
147 {"Headphone Jack", NULL, "ROUT2"},
149 {"Internal Speaker", NULL, "LOUT2"},
150 {"Internal Speaker", NULL, "ROUT2"},
152 {"Mic Bias", NULL, "Internal Mic"},
153 {"LINPUT2", NULL, "Mic Bias"},
156 static int smartq_wm8987_init(struct snd_soc_pcm_runtime *rtd)
158 struct snd_soc_codec *codec = rtd->codec;
159 struct snd_soc_dapm_context *dapm = &codec->dapm;
160 int err = 0;
162 /* Add SmartQ specific widgets */
163 snd_soc_dapm_new_controls(dapm, wm8987_dapm_widgets,
164 ARRAY_SIZE(wm8987_dapm_widgets));
166 /* add SmartQ specific controls */
167 err = snd_soc_add_controls(codec, wm8987_smartq_controls,
168 ARRAY_SIZE(wm8987_smartq_controls));
170 if (err < 0)
171 return err;
173 /* setup SmartQ specific audio path */
174 snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
176 /* set endpoints to not connected */
177 snd_soc_dapm_nc_pin(dapm, "LINPUT1");
178 snd_soc_dapm_nc_pin(dapm, "RINPUT1");
179 snd_soc_dapm_nc_pin(dapm, "OUT3");
180 snd_soc_dapm_nc_pin(dapm, "ROUT1");
182 /* set endpoints to default off mode */
183 snd_soc_dapm_enable_pin(dapm, "Internal Speaker");
184 snd_soc_dapm_enable_pin(dapm, "Internal Mic");
185 snd_soc_dapm_disable_pin(dapm, "Headphone Jack");
187 err = snd_soc_dapm_sync(dapm);
188 if (err)
189 return err;
191 /* Headphone jack detection */
192 err = snd_soc_jack_new(codec, "Headphone Jack",
193 SND_JACK_HEADPHONE, &smartq_jack);
194 if (err)
195 return err;
197 err = snd_soc_jack_add_pins(&smartq_jack, ARRAY_SIZE(smartq_jack_pins),
198 smartq_jack_pins);
199 if (err)
200 return err;
202 err = snd_soc_jack_add_gpios(&smartq_jack,
203 ARRAY_SIZE(smartq_jack_gpios),
204 smartq_jack_gpios);
206 return err;
209 static struct snd_soc_dai_link smartq_dai[] = {
211 .name = "wm8987",
212 .stream_name = "SmartQ Hi-Fi",
213 .cpu_dai_name = "samsung-i2s.0",
214 .codec_dai_name = "wm8750-hifi",
215 .platform_name = "samsung-audio",
216 .codec_name = "wm8750-codec.0-0x1a",
217 .init = smartq_wm8987_init,
218 .ops = &smartq_hifi_ops,
222 static struct snd_soc_card snd_soc_smartq = {
223 .name = "SmartQ",
224 .dai_link = smartq_dai,
225 .num_links = ARRAY_SIZE(smartq_dai),
228 static struct platform_device *smartq_snd_device;
230 static int __init smartq_init(void)
232 int ret;
234 if (!machine_is_smartq7() && !machine_is_smartq5()) {
235 pr_info("Only SmartQ is supported by this ASoC driver\n");
236 return -ENODEV;
239 smartq_snd_device = platform_device_alloc("soc-audio", -1);
240 if (!smartq_snd_device)
241 return -ENOMEM;
243 platform_set_drvdata(smartq_snd_device, &snd_soc_smartq);
245 ret = platform_device_add(smartq_snd_device);
246 if (ret) {
247 platform_device_put(smartq_snd_device);
248 return ret;
251 /* Initialise GPIOs used by amplifiers */
252 ret = gpio_request(S3C64XX_GPK(12), "amplifiers shutdown");
253 if (ret) {
254 dev_err(&smartq_snd_device->dev, "Failed to register GPK12\n");
255 goto err_unregister_device;
258 /* Disable amplifiers */
259 ret = gpio_direction_output(S3C64XX_GPK(12), 1);
260 if (ret) {
261 dev_err(&smartq_snd_device->dev, "Failed to configure GPK12\n");
262 goto err_free_gpio_amp_shut;
265 return 0;
267 err_free_gpio_amp_shut:
268 gpio_free(S3C64XX_GPK(12));
269 err_unregister_device:
270 platform_device_unregister(smartq_snd_device);
272 return ret;
275 static void __exit smartq_exit(void)
277 gpio_free(S3C64XX_GPK(12));
278 snd_soc_jack_free_gpios(&smartq_jack, ARRAY_SIZE(smartq_jack_gpios),
279 smartq_jack_gpios);
281 platform_device_unregister(smartq_snd_device);
284 module_init(smartq_init);
285 module_exit(smartq_exit);
287 /* Module information */
288 MODULE_AUTHOR("Maurus Cuelenaere <mcuelenaere@gmail.com>");
289 MODULE_DESCRIPTION("ALSA SoC SmartQ WM8987");
290 MODULE_LICENSE("GPL");