drm/i915: hook up LVDS DPMS property

[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / gpu / drm / i915 / intel_lvds.c

/*
 * Copyright © 2006-2007 Intel Corporation
 * Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 * DEALINGS IN THE SOFTWARE.
 *
 * Authors:
 *      Eric Anholt <eric@anholt.net>
 *      Dave Airlie <airlied@linux.ie>
 *      Jesse Barnes <jesse.barnes@intel.com>
 */

#include <linux/i2c.h>
#include "drmP.h"
#include "drm.h"
#include "drm_crtc.h"
#include "drm_edid.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"

/**
 * Sets the backlight level.
 *
 * \param level backlight level, from 0 to intel_lvds_get_max_backlight().
 */
static void intel_lvds_set_backlight(struct drm_device *dev, int level)
{
        struct drm_i915_private *dev_priv = dev->dev_private;
        u32 blc_pwm_ctl;

        blc_pwm_ctl = I915_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK;
        I915_WRITE(BLC_PWM_CTL, (blc_pwm_ctl |
                                 (level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
}

/**
 * Returns the maximum level of the backlight duty cycle field.
 */
static u32 intel_lvds_get_max_backlight(struct drm_device *dev)
{
        struct drm_i915_private *dev_priv = dev->dev_private;

        return ((I915_READ(BLC_PWM_CTL) & BACKLIGHT_MODULATION_FREQ_MASK) >>
                BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
}

/**
 * Sets the power state for the panel.
 */
static void intel_lvds_set_power(struct drm_device *dev, bool on)
{
        struct drm_i915_private *dev_priv = dev->dev_private;
        u32 pp_status;

        if (on) {
                I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) |
                           POWER_TARGET_ON);
                do {
                        pp_status = I915_READ(PP_STATUS);
                } while ((pp_status & PP_ON) == 0);

                intel_lvds_set_backlight(dev, dev_priv->backlight_duty_cycle);
        } else {
                intel_lvds_set_backlight(dev, 0);

                I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) &
                           ~POWER_TARGET_ON);
                do {
                        pp_status = I915_READ(PP_STATUS);
                } while (pp_status & PP_ON);
        }
}

static void intel_lvds_dpms(struct drm_encoder *encoder, int mode)
{
        struct drm_device *dev = encoder->dev;

        if (mode == DRM_MODE_DPMS_ON)
                intel_lvds_set_power(dev, true);
        else
                intel_lvds_set_power(dev, false);

        /* XXX: We never power down the LVDS pairs. */
}

static void intel_lvds_save(struct drm_connector *connector)
{
        struct drm_device *dev = connector->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;

        dev_priv->savePP_ON = I915_READ(PP_ON_DELAYS);
        dev_priv->savePP_OFF = I915_READ(PP_OFF_DELAYS);
        dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL);
        dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
        dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
        dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL &
                                       BACKLIGHT_DUTY_CYCLE_MASK);

        /*
         * If the light is off at server startup, just make it full brightness
         */
        if (dev_priv->backlight_duty_cycle == 0)
                dev_priv->backlight_duty_cycle =
                        intel_lvds_get_max_backlight(dev);
}

static void intel_lvds_restore(struct drm_connector *connector)
{
        struct drm_device *dev = connector->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;

        I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL);
        I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON);
        I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF);
        I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
        I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
        if (dev_priv->savePP_CONTROL & POWER_TARGET_ON)
                intel_lvds_set_power(dev, true);
        else
                intel_lvds_set_power(dev, false);
}

static int intel_lvds_mode_valid(struct drm_connector *connector,
                                 struct drm_display_mode *mode)
{
        struct drm_device *dev = connector->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct drm_display_mode *fixed_mode = dev_priv->panel_fixed_mode;

        if (fixed_mode) {
                if (mode->hdisplay > fixed_mode->hdisplay)
                        return MODE_PANEL;
                if (mode->vdisplay > fixed_mode->vdisplay)
                        return MODE_PANEL;
        }

        return MODE_OK;
}

static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
                                  struct drm_display_mode *mode,
                                  struct drm_display_mode *adjusted_mode)
{
        struct drm_device *dev = encoder->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
        struct drm_encoder *tmp_encoder;

        /* Should never happen!! */
        if (!IS_I965G(dev) && intel_crtc->pipe == 0) {
                printk(KERN_ERR "Can't support LVDS on pipe A\n");
                return false;
        }

        /* Should never happen!! */
        list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, head) {
                if (tmp_encoder != encoder && tmp_encoder->crtc == encoder->crtc) {
                        printk(KERN_ERR "Can't enable LVDS and another "
                               "encoder on the same pipe\n");
                        return false;
                }
        }

        /*
         * If we have timings from the BIOS for the panel, put them in
         * to the adjusted mode.  The CRTC will be set up for this mode,
         * with the panel scaling set up to source from the H/VDisplay
         * of the original mode.
         */
        if (dev_priv->panel_fixed_mode != NULL) {
                adjusted_mode->hdisplay = dev_priv->panel_fixed_mode->hdisplay;
                adjusted_mode->hsync_start =
                        dev_priv->panel_fixed_mode->hsync_start;
                adjusted_mode->hsync_end =
                        dev_priv->panel_fixed_mode->hsync_end;
                adjusted_mode->htotal = dev_priv->panel_fixed_mode->htotal;
                adjusted_mode->vdisplay = dev_priv->panel_fixed_mode->vdisplay;
                adjusted_mode->vsync_start =
                        dev_priv->panel_fixed_mode->vsync_start;
                adjusted_mode->vsync_end =
                        dev_priv->panel_fixed_mode->vsync_end;
                adjusted_mode->vtotal = dev_priv->panel_fixed_mode->vtotal;
                adjusted_mode->clock = dev_priv->panel_fixed_mode->clock;
                drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
        }

        /*
         * XXX: It would be nice to support lower refresh rates on the
         * panels to reduce power consumption, and perhaps match the
         * user's requested refresh rate.
         */

        return true;
}

static void intel_lvds_prepare(struct drm_encoder *encoder)
{
        struct drm_device *dev = encoder->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;

        dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
        dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL &
                                       BACKLIGHT_DUTY_CYCLE_MASK);

        intel_lvds_set_power(dev, false);
}

static void intel_lvds_commit( struct drm_encoder *encoder)
{
        struct drm_device *dev = encoder->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;

        if (dev_priv->backlight_duty_cycle == 0)
                dev_priv->backlight_duty_cycle =
                        intel_lvds_get_max_backlight(dev);

        intel_lvds_set_power(dev, true);
}

static void intel_lvds_mode_set(struct drm_encoder *encoder,
                                struct drm_display_mode *mode,
                                struct drm_display_mode *adjusted_mode)
{
        struct drm_device *dev = encoder->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
        u32 pfit_control;

        /*
         * The LVDS pin pair will already have been turned on in the
         * intel_crtc_mode_set since it has a large impact on the DPLL
         * settings.
         */

        /*
         * Enable automatic panel scaling so that non-native modes fill the
         * screen.  Should be enabled before the pipe is enabled, according to
         * register description and PRM.
         */
        if (mode->hdisplay != adjusted_mode->hdisplay ||
            mode->vdisplay != adjusted_mode->vdisplay)
                pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
                                HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
                                HORIZ_INTERP_BILINEAR);
        else
                pfit_control = 0;

        if (!IS_I965G(dev)) {
                if (dev_priv->panel_wants_dither)
                        pfit_control |= PANEL_8TO6_DITHER_ENABLE;
        }
        else
                pfit_control |= intel_crtc->pipe << PFIT_PIPE_SHIFT;

        I915_WRITE(PFIT_CONTROL, pfit_control);
}

/**
 * Detect the LVDS connection.
 *
 * This always returns CONNECTOR_STATUS_CONNECTED.  This connector should only have
 * been set up if the LVDS was actually connected anyway.
 */
static enum drm_connector_status intel_lvds_detect(struct drm_connector *connector)
{
        return connector_status_connected;
}

/**
 * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
 */
static int intel_lvds_get_modes(struct drm_connector *connector)
{
        struct drm_device *dev = connector->dev;
        struct intel_output *intel_output = to_intel_output(connector);
        struct drm_i915_private *dev_priv = dev->dev_private;
        int ret = 0;

        ret = intel_ddc_get_modes(intel_output);

        if (ret)
                return ret;

        /* Didn't get an EDID, so
         * Set wide sync ranges so we get all modes
         * handed to valid_mode for checking
         */
        connector->display_info.min_vfreq = 0;
        connector->display_info.max_vfreq = 200;
        connector->display_info.min_hfreq = 0;
        connector->display_info.max_hfreq = 200;

        if (dev_priv->panel_fixed_mode != NULL) {
                struct drm_display_mode *mode;

                mutex_unlock(&dev->mode_config.mutex);
                mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode);
                drm_mode_probed_add(connector, mode);
                mutex_unlock(&dev->mode_config.mutex);

                return 1;
        }

        return 0;
}

/**
 * intel_lvds_destroy - unregister and free LVDS structures
 * @connector: connector to free
 *
 * Unregister the DDC bus for this connector then free the driver private
 * structure.
 */
static void intel_lvds_destroy(struct drm_connector *connector)
{
        struct intel_output *intel_output = to_intel_output(connector);

        if (intel_output->ddc_bus)
                intel_i2c_destroy(intel_output->ddc_bus);
        drm_sysfs_connector_remove(connector);
        drm_connector_cleanup(connector);
        kfree(connector);
}

static int intel_lvds_set_property(struct drm_connector *connector,
                                   struct drm_property *property,
                                   uint64_t value)
{
        struct drm_device *dev = connector->dev;

        if (property == dev->mode_config.dpms_property && connector->encoder)
                intel_lvds_dpms(connector->encoder, (uint32_t)(value & 0xf));

        return 0;
}

static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = {
        .dpms = intel_lvds_dpms,
        .mode_fixup = intel_lvds_mode_fixup,
        .prepare = intel_lvds_prepare,
        .mode_set = intel_lvds_mode_set,
        .commit = intel_lvds_commit,
};

static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs = {
        .get_modes = intel_lvds_get_modes,
        .mode_valid = intel_lvds_mode_valid,
        .best_encoder = intel_best_encoder,
};

static const struct drm_connector_funcs intel_lvds_connector_funcs = {
        .save = intel_lvds_save,
        .restore = intel_lvds_restore,
        .detect = intel_lvds_detect,
        .fill_modes = drm_helper_probe_single_connector_modes,
        .set_property = intel_lvds_set_property,
        .destroy = intel_lvds_destroy,
};


static void intel_lvds_enc_destroy(struct drm_encoder *encoder)
{
        drm_encoder_cleanup(encoder);
}

static const struct drm_encoder_funcs intel_lvds_enc_funcs = {
        .destroy = intel_lvds_enc_destroy,
};



/**
 * intel_lvds_init - setup LVDS connectors on this device
 * @dev: drm device
 *
 * Create the connector, register the LVDS DDC bus, and try to figure out what
 * modes we can display on the LVDS panel (if present).
 */
void intel_lvds_init(struct drm_device *dev)
{
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_output *intel_output;
        struct drm_connector *connector;
        struct drm_encoder *encoder;
        struct drm_display_mode *scan; /* *modes, *bios_mode; */
        struct drm_crtc *crtc;
        u32 lvds;
        int pipe;

        intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
        if (!intel_output) {
                return;
        }

        connector = &intel_output->base;
        encoder = &intel_output->enc;
        drm_connector_init(dev, &intel_output->base, &intel_lvds_connector_funcs,
                           DRM_MODE_CONNECTOR_LVDS);

        drm_encoder_init(dev, &intel_output->enc, &intel_lvds_enc_funcs,
                         DRM_MODE_ENCODER_LVDS);

        drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
        intel_output->type = INTEL_OUTPUT_LVDS;

        drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs);
        drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
        connector->display_info.subpixel_order = SubPixelHorizontalRGB;
        connector->interlace_allowed = false;
        connector->doublescan_allowed = false;


        /*
         * LVDS discovery:
         * 1) check for EDID on DDC
         * 2) check for VBT data
         * 3) check to see if LVDS is already on
         *    if none of the above, no panel
         * 4) make sure lid is open
         *    if closed, act like it's not there for now
         */

        /* Set up the DDC bus. */
        intel_output->ddc_bus = intel_i2c_create(dev, GPIOC, "LVDSDDC_C");
        if (!intel_output->ddc_bus) {
                dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
                           "failed.\n");
                goto failed;
        }

        /*
         * Attempt to get the fixed panel mode from DDC.  Assume that the
         * preferred mode is the right one.
         */
        intel_ddc_get_modes(intel_output);

        list_for_each_entry(scan, &connector->probed_modes, head) {
                mutex_lock(&dev->mode_config.mutex);
                if (scan->type & DRM_MODE_TYPE_PREFERRED) {
                        dev_priv->panel_fixed_mode =
                                drm_mode_duplicate(dev, scan);
                        mutex_unlock(&dev->mode_config.mutex);
                        goto out; /* FIXME: check for quirks */
                }
                mutex_unlock(&dev->mode_config.mutex);
        }

        /* Failed to get EDID, what about VBT? */
        if (dev_priv->vbt_mode) {
                mutex_lock(&dev->mode_config.mutex);
                dev_priv->panel_fixed_mode =
                        drm_mode_duplicate(dev, dev_priv->vbt_mode);
                mutex_unlock(&dev->mode_config.mutex);
                if (dev_priv->panel_fixed_mode) {
                        dev_priv->panel_fixed_mode->type |=
                                DRM_MODE_TYPE_PREFERRED;
                        drm_mode_probed_add(connector,
                                            dev_priv->panel_fixed_mode);
                        goto out;
                }
        }

        /*
         * If we didn't get EDID, try checking if the panel is already turned
         * on.  If so, assume that whatever is currently programmed is the
         * correct mode.
         */
        lvds = I915_READ(LVDS);
        pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
        crtc = intel_get_crtc_from_pipe(dev, pipe);

        if (crtc && (lvds & LVDS_PORT_EN)) {
                dev_priv->panel_fixed_mode = intel_crtc_mode_get(dev, crtc);
                if (dev_priv->panel_fixed_mode) {
                        dev_priv->panel_fixed_mode->type |=
                                DRM_MODE_TYPE_PREFERRED;
                        goto out; /* FIXME: check for quirks */
                }
        }

        /* If we still don't have a mode after all that, give up. */
        if (!dev_priv->panel_fixed_mode)
                goto failed;

        /* FIXME: detect aopen & mac mini type stuff automatically? */
        /*
         * Blacklist machines with BIOSes that list an LVDS panel without
         * actually having one.
         */
        if (IS_I945GM(dev)) {
                /* aopen mini pc */
                if (dev->pdev->subsystem_vendor == 0xa0a0)
                        goto failed;

                if ((dev->pdev->subsystem_vendor == 0x8086) &&
                    (dev->pdev->subsystem_device == 0x7270)) {
                        /* It's a Mac Mini or Macbook Pro.
                         *
                         * Apple hardware is out to get us.  The macbook pro
                         * has a real LVDS panel, but the mac mini does not,
                         * and they have the same device IDs.  We'll
                         * distinguish by panel size, on the assumption
                         * that Apple isn't about to make any machines with an
                         * 800x600 display.
                         */

                        if (dev_priv->panel_fixed_mode != NULL &&
                            dev_priv->panel_fixed_mode->hdisplay == 800 &&
                            dev_priv->panel_fixed_mode->vdisplay == 600) {
                                DRM_DEBUG("Suspected Mac Mini, ignoring the LVDS\n");
                                goto failed;
                        }
                }
        }


out:
        drm_sysfs_connector_add(connector);
        return;

failed:
        DRM_DEBUG("No LVDS modes found, disabling.\n");
        if (intel_output->ddc_bus)
                intel_i2c_destroy(intel_output->ddc_bus);
        drm_connector_cleanup(connector);
        kfree(connector);
}