?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[MTD] AMD Geode NAND support can depend on X86_32; we won't see it on x86_64
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / serial / s3c2410.c
blobf5aac92fb7981b673250f8099c2b1dc7f0616ebe
1 /*
2 * linux/drivers/serial/s3c2410.c
3 *
4 * Driver for onboard UARTs on the Samsung S3C24XX
5 *
6 * Based on drivers/char/serial.c and drivers/char/21285.c
7 *
8 * Ben Dooks, (c) 2003-2005 Simtec Electronics
9 * http://www.simtec.co.uk/products/SWLINUX/
10 *
11 * Changelog:
12 *
13 * 22-Jul-2004 BJD Finished off device rewrite
14 *
15 * 21-Jul-2004 BJD Thanks to <herbet@13thfloor.at> for pointing out
16 * problems with baud rate and loss of IR settings. Update
17 * to add configuration via platform_device structure
18 *
19 * 28-Sep-2004 BJD Re-write for the following items
20 * - S3C2410 and S3C2440 serial support
21 * - Power Management support
22 * - Fix console via IrDA devices
23 * - SysReq (Herbert Pötzl)
24 * - Break character handling (Herbert Pötzl)
25 * - spin-lock initialisation (Dimitry Andric)
26 * - added clock control
27 * - updated init code to use platform_device info
28 *
29 * 06-Mar-2005 BJD Add s3c2440 fclk clock source
30 *
31 * 09-Mar-2005 BJD Add s3c2400 support
32 *
33 * 10-Mar-2005 LCVR Changed S3C2410_VA_UART to S3C24XX_VA_UART
34 */
35
36 /* Note on 2440 fclk clock source handling
37 *
38 * Whilst it is possible to use the fclk as clock source, the method
39 * of properly switching too/from this is currently un-implemented, so
40 * whichever way is configured at startup is the one that will be used.
41 */
42
43 /* Hote on 2410 error handling
44 *
45 * The s3c2410 manual has a love/hate affair with the contents of the
46 * UERSTAT register in the UART blocks, and keeps marking some of the
47 * error bits as reserved. Having checked with the s3c2410x01,
48 * it copes with BREAKs properly, so I am happy to ignore the RESERVED
49 * feature from the latter versions of the manual.
50 *
51 * If it becomes aparrent that latter versions of the 2410 remove these
52 * bits, then action will have to be taken to differentiate the versions
53 * and change the policy on BREAK
54 *
55 * BJD, 04-Nov-2004
56 */
57
58 #include <linux/config.h>
59
60 #if defined(CONFIG_SERIAL_S3C2410_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
61 #define SUPPORT_SYSRQ
62 #endif
63
64 #include <linux/module.h>
65 #include <linux/ioport.h>
66 #include <linux/platform_device.h>
67 #include <linux/init.h>
68 #include <linux/sysrq.h>
69 #include <linux/console.h>
70 #include <linux/tty.h>
71 #include <linux/tty_flip.h>
72 #include <linux/serial_core.h>
73 #include <linux/serial.h>
74 #include <linux/delay.h>
75 #include <linux/clk.h>
76
77 #include <asm/io.h>
78 #include <asm/irq.h>
79
80 #include <asm/hardware.h>
81
82 #include <asm/arch/regs-serial.h>
83 #include <asm/arch/regs-gpio.h>
84
85 /* structures */
86
87 struct s3c24xx_uart_info {
88 char *name;
89 unsigned int type;
90 unsigned int fifosize;
91 unsigned long rx_fifomask;
92 unsigned long rx_fifoshift;
93 unsigned long rx_fifofull;
94 unsigned long tx_fifomask;
95 unsigned long tx_fifoshift;
96 unsigned long tx_fifofull;
97
98 /* clock source control */
99
100 int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
101 int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
102
103 /* uart controls */
104 int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *);
105 };
106
107 struct s3c24xx_uart_port {
108 unsigned char rx_claimed;
109 unsigned char tx_claimed;
110
111 struct s3c24xx_uart_info *info;
112 struct s3c24xx_uart_clksrc *clksrc;
113 struct clk *clk;
114 struct clk *baudclk;
115 struct uart_port port;
116 };
117
118
119 /* configuration defines */
120
121 #if 0
122 #if 1
123 /* send debug to the low-level output routines */
124
125 extern void printascii(const char *);
126
127 static void
128 s3c24xx_serial_dbg(const char *fmt, ...)
129 {
130 va_list va;
131 char buff[256];
132
133 va_start(va, fmt);
134 vsprintf(buff, fmt, va);
135 va_end(va);
136
137 printascii(buff);
138 }
139
140 #define dbg(x...) s3c24xx_serial_dbg(x)
141
142 #else
143 #define dbg(x...) printk(KERN_DEBUG "s3c24xx: ");
144 #endif
145 #else /* no debug */
146 #define dbg(x...) do {} while(0)
147 #endif
148
149 /* UART name and device definitions */
150
151 #define S3C24XX_SERIAL_NAME "ttySAC"
152 #define S3C24XX_SERIAL_DEVFS "tts/"
153 #define S3C24XX_SERIAL_MAJOR 204
154 #define S3C24XX_SERIAL_MINOR 64
155
156
157 /* conversion functions */
158
159 #define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev)
160 #define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data)
161
162 /* we can support 3 uarts, but not always use them */
163
164 #ifdef CONFIG_CPU_S3C2400
165 #define NR_PORTS (2)
166 #else
167 #define NR_PORTS (3)
168 #endif
169
170 /* port irq numbers */
171
172 #define TX_IRQ(port) ((port)->irq + 1)
173 #define RX_IRQ(port) ((port)->irq)
174
175 /* register access controls */
176
177 #define portaddr(port, reg) ((port)->membase + (reg))
178
179 #define rd_regb(port, reg) (__raw_readb(portaddr(port, reg)))
180 #define rd_regl(port, reg) (__raw_readl(portaddr(port, reg)))
181
182 #define wr_regb(port, reg, val) \
183 do { __raw_writeb(val, portaddr(port, reg)); } while(0)
184
185 #define wr_regl(port, reg, val) \
186 do { __raw_writel(val, portaddr(port, reg)); } while(0)
187
188 /* macros to change one thing to another */
189
190 #define tx_enabled(port) ((port)->unused[0])
191 #define rx_enabled(port) ((port)->unused[1])
192
193 /* flag to ignore all characters comming in */
194 #define RXSTAT_DUMMY_READ (0x10000000)
195
196 static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
197 {
198 return container_of(port, struct s3c24xx_uart_port, port);
199 }
200
201 /* translate a port to the device name */
202
203 static inline const char *s3c24xx_serial_portname(struct uart_port *port)
204 {
205 return to_platform_device(port->dev)->name;
206 }
207
208 static int s3c24xx_serial_txempty_nofifo(struct uart_port *port)
209 {
210 return (rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE);
211 }
212
213 static void s3c24xx_serial_rx_enable(struct uart_port *port)
214 {
215 unsigned long flags;
216 unsigned int ucon, ufcon;
217 int count = 10000;
218
219 spin_lock_irqsave(&port->lock, flags);
220
221 while (--count && !s3c24xx_serial_txempty_nofifo(port))
222 udelay(100);
223
224 ufcon = rd_regl(port, S3C2410_UFCON);
225 ufcon |= S3C2410_UFCON_RESETRX;
226 wr_regl(port, S3C2410_UFCON, ufcon);
227
228 ucon = rd_regl(port, S3C2410_UCON);
229 ucon |= S3C2410_UCON_RXIRQMODE;
230 wr_regl(port, S3C2410_UCON, ucon);
231
232 rx_enabled(port) = 1;
233 spin_unlock_irqrestore(&port->lock, flags);
234 }
235
236 static void s3c24xx_serial_rx_disable(struct uart_port *port)
237 {
238 unsigned long flags;
239 unsigned int ucon;
240
241 spin_lock_irqsave(&port->lock, flags);
242
243 ucon = rd_regl(port, S3C2410_UCON);
244 ucon &= ~S3C2410_UCON_RXIRQMODE;
245 wr_regl(port, S3C2410_UCON, ucon);
246
247 rx_enabled(port) = 0;
248 spin_unlock_irqrestore(&port->lock, flags);
249 }
250
251 static void s3c24xx_serial_stop_tx(struct uart_port *port)
252 {
253 if (tx_enabled(port)) {
254 disable_irq(TX_IRQ(port));
255 tx_enabled(port) = 0;
256 if (port->flags & UPF_CONS_FLOW)
257 s3c24xx_serial_rx_enable(port);
258 }
259 }
260
261 static void s3c24xx_serial_start_tx(struct uart_port *port)
262 {
263 if (!tx_enabled(port)) {
264 if (port->flags & UPF_CONS_FLOW)
265 s3c24xx_serial_rx_disable(port);
266
267 enable_irq(TX_IRQ(port));
268 tx_enabled(port) = 1;
269 }
270 }
271
272
273 static void s3c24xx_serial_stop_rx(struct uart_port *port)
274 {
275 if (rx_enabled(port)) {
276 dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
277 disable_irq(RX_IRQ(port));
278 rx_enabled(port) = 0;
279 }
280 }
281
282 static void s3c24xx_serial_enable_ms(struct uart_port *port)
283 {
284 }
285
286 static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *port)
287 {
288 return to_ourport(port)->info;
289 }
290
291 static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port)
292 {
293 if (port->dev == NULL)
294 return NULL;
295
296 return (struct s3c2410_uartcfg *)port->dev->platform_data;
297 }
298
299 static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
300 unsigned long ufstat)
301 {
302 struct s3c24xx_uart_info *info = ourport->info;
303
304 if (ufstat & info->rx_fifofull)
305 return info->fifosize;
306
307 return (ufstat & info->rx_fifomask) >> info->rx_fifoshift;
308 }
309
310
311 /* ? - where has parity gone?? */
312 #define S3C2410_UERSTAT_PARITY (0x1000)
313
314 static irqreturn_t
315 s3c24xx_serial_rx_chars(int irq, void *dev_id, struct pt_regs *regs)
316 {
317 struct s3c24xx_uart_port *ourport = dev_id;
318 struct uart_port *port = &ourport->port;
319 struct tty_struct *tty = port->info->tty;
320 unsigned int ufcon, ch, flag, ufstat, uerstat;
321 int max_count = 64;
322
323 while (max_count-- > 0) {
324 ufcon = rd_regl(port, S3C2410_UFCON);
325 ufstat = rd_regl(port, S3C2410_UFSTAT);
326
327 if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
328 break;
329
330 uerstat = rd_regl(port, S3C2410_UERSTAT);
331 ch = rd_regb(port, S3C2410_URXH);
332
333 if (port->flags & UPF_CONS_FLOW) {
334 int txe = s3c24xx_serial_txempty_nofifo(port);
335
336 if (rx_enabled(port)) {
337 if (!txe) {
338 rx_enabled(port) = 0;
339 continue;
340 }
341 } else {
342 if (txe) {
343 ufcon |= S3C2410_UFCON_RESETRX;
344 wr_regl(port, S3C2410_UFCON, ufcon);
345 rx_enabled(port) = 1;
346 goto out;
347 }
348 continue;
349 }
350 }
351
352 /* insert the character into the buffer */
353
354 flag = TTY_NORMAL;
355 port->icount.rx++;
356
357 if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) {
358 dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n",
359 ch, uerstat);
360
361 /* check for break */
362 if (uerstat & S3C2410_UERSTAT_BREAK) {
363 dbg("break!\n");
364 port->icount.brk++;
365 if (uart_handle_break(port))
366 goto ignore_char;
367 }
368
369 if (uerstat & S3C2410_UERSTAT_FRAME)
370 port->icount.frame++;
371 if (uerstat & S3C2410_UERSTAT_OVERRUN)
372 port->icount.overrun++;
373
374 uerstat &= port->read_status_mask;
375
376 if (uerstat & S3C2410_UERSTAT_BREAK)
377 flag = TTY_BREAK;
378 else if (uerstat & S3C2410_UERSTAT_PARITY)
379 flag = TTY_PARITY;
380 else if (uerstat & ( S3C2410_UERSTAT_FRAME | S3C2410_UERSTAT_OVERRUN))
381 flag = TTY_FRAME;
382 }
383
384 if (uart_handle_sysrq_char(port, ch, regs))
385 goto ignore_char;
386
387 uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN, ch, flag);
388
389 ignore_char:
390 continue;
391 }
392 tty_flip_buffer_push(tty);
393
394 out:
395 return IRQ_HANDLED;
396 }
397
398 static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id, struct pt_regs *regs)
399 {
400 struct s3c24xx_uart_port *ourport = id;
401 struct uart_port *port = &ourport->port;
402 struct circ_buf *xmit = &port->info->xmit;
403 int count = 256;
404
405 if (port->x_char) {
406 wr_regb(port, S3C2410_UTXH, port->x_char);
407 port->icount.tx++;
408 port->x_char = 0;
409 goto out;
410 }
411
412 /* if there isnt anything more to transmit, or the uart is now
413 * stopped, disable the uart and exit
414 */
415
416 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
417 s3c24xx_serial_stop_tx(port);
418 goto out;
419 }
420
421 /* try and drain the buffer... */
422
423 while (!uart_circ_empty(xmit) && count-- > 0) {
424 if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
425 break;
426
427 wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
428 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
429 port->icount.tx++;
430 }
431
432 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
433 uart_write_wakeup(port);
434
435 if (uart_circ_empty(xmit))
436 s3c24xx_serial_stop_tx(port);
437
438 out:
439 return IRQ_HANDLED;
440 }
441
442 static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
443 {
444 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
445 unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT);
446 unsigned long ufcon = rd_regl(port, S3C2410_UFCON);
447
448 if (ufcon & S3C2410_UFCON_FIFOMODE) {
449 if ((ufstat & info->tx_fifomask) != 0 ||
450 (ufstat & info->tx_fifofull))
451 return 0;
452
453 return 1;
454 }
455
456 return s3c24xx_serial_txempty_nofifo(port);
457 }
458
459 /* no modem control lines */
460 static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
461 {
462 unsigned int umstat = rd_regb(port,S3C2410_UMSTAT);
463
464 if (umstat & S3C2410_UMSTAT_CTS)
465 return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
466 else
467 return TIOCM_CAR | TIOCM_DSR;
468 }
469
470 static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
471 {
472 /* todo - possibly remove AFC and do manual CTS */
473 }
474
475 static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
476 {
477 unsigned long flags;
478 unsigned int ucon;
479
480 spin_lock_irqsave(&port->lock, flags);
481
482 ucon = rd_regl(port, S3C2410_UCON);
483
484 if (break_state)
485 ucon |= S3C2410_UCON_SBREAK;
486 else
487 ucon &= ~S3C2410_UCON_SBREAK;
488
489 wr_regl(port, S3C2410_UCON, ucon);
490
491 spin_unlock_irqrestore(&port->lock, flags);
492 }
493
494 static void s3c24xx_serial_shutdown(struct uart_port *port)
495 {
496 struct s3c24xx_uart_port *ourport = to_ourport(port);
497
498 if (ourport->tx_claimed) {
499 free_irq(TX_IRQ(port), ourport);
500 tx_enabled(port) = 0;
501 ourport->tx_claimed = 0;
502 }
503
504 if (ourport->rx_claimed) {
505 free_irq(RX_IRQ(port), ourport);
506 ourport->rx_claimed = 0;
507 rx_enabled(port) = 0;
508 }
509 }
510
511
512 static int s3c24xx_serial_startup(struct uart_port *port)
513 {
514 struct s3c24xx_uart_port *ourport = to_ourport(port);
515 int ret;
516
517 dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n",
518 port->mapbase, port->membase);
519
520 rx_enabled(port) = 1;
521
522 ret = request_irq(RX_IRQ(port),
523 s3c24xx_serial_rx_chars, 0,
524 s3c24xx_serial_portname(port), ourport);
525
526 if (ret != 0) {
527 printk(KERN_ERR "cannot get irq %d\n", RX_IRQ(port));
528 return ret;
529 }
530
531 ourport->rx_claimed = 1;
532
533 dbg("requesting tx irq...\n");
534
535 tx_enabled(port) = 1;
536
537 ret = request_irq(TX_IRQ(port),
538 s3c24xx_serial_tx_chars, 0,
539 s3c24xx_serial_portname(port), ourport);
540
541 if (ret) {
542 printk(KERN_ERR "cannot get irq %d\n", TX_IRQ(port));
543 goto err;
544 }
545
546 ourport->tx_claimed = 1;
547
548 dbg("s3c24xx_serial_startup ok\n");
549
550 /* the port reset code should have done the correct
551 * register setup for the port controls */
552
553 return ret;
554
555 err:
556 s3c24xx_serial_shutdown(port);
557 return ret;
558 }
559
560 /* power power management control */
561
562 static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
563 unsigned int old)
564 {
565 struct s3c24xx_uart_port *ourport = to_ourport(port);
566
567 switch (level) {
568 case 3:
569 if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
570 clk_disable(ourport->baudclk);
571
572 clk_disable(ourport->clk);
573 break;
574
575 case 0:
576 clk_enable(ourport->clk);
577
578 if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
579 clk_enable(ourport->baudclk);
580
581 break;
582 default:
583 printk(KERN_ERR "s3c24xx_serial: unknown pm %d\n", level);
584 }
585 }
586
587 /* baud rate calculation
588 *
589 * The UARTs on the S3C2410/S3C2440 can take their clocks from a number
590 * of different sources, including the peripheral clock ("pclk") and an
591 * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk")
592 * with a programmable extra divisor.
593 *
594 * The following code goes through the clock sources, and calculates the
595 * baud clocks (and the resultant actual baud rates) and then tries to
596 * pick the closest one and select that.
597 *
598 */
599
600
601 #define MAX_CLKS (8)
602
603 static struct s3c24xx_uart_clksrc tmp_clksrc = {
604 .name = "pclk",
605 .min_baud = 0,
606 .max_baud = 0,
607 .divisor = 1,
608 };
609
610 static inline int
611 s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
612 {
613 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
614
615 return (info->get_clksrc)(port, c);
616 }
617
618 static inline int
619 s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
620 {
621 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
622
623 return (info->set_clksrc)(port, c);
624 }
625
626 struct baud_calc {
627 struct s3c24xx_uart_clksrc *clksrc;
628 unsigned int calc;
629 unsigned int quot;
630 struct clk *src;
631 };
632
633 static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
634 struct uart_port *port,
635 struct s3c24xx_uart_clksrc *clksrc,
636 unsigned int baud)
637 {
638 unsigned long rate;
639
640 calc->src = clk_get(port->dev, clksrc->name);
641 if (calc->src == NULL || IS_ERR(calc->src))
642 return 0;
643
644 rate = clk_get_rate(calc->src);
645 rate /= clksrc->divisor;
646
647 calc->clksrc = clksrc;
648 calc->quot = (rate + (8 * baud)) / (16 * baud);
649 calc->calc = (rate / (calc->quot * 16));
650
651 calc->quot--;
652 return 1;
653 }
654
655 static unsigned int s3c24xx_serial_getclk(struct uart_port *port,
656 struct s3c24xx_uart_clksrc **clksrc,
657 struct clk **clk,
658 unsigned int baud)
659 {
660 struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
661 struct s3c24xx_uart_clksrc *clkp;
662 struct baud_calc res[MAX_CLKS];
663 struct baud_calc *resptr, *best, *sptr;
664 int i;
665
666 clkp = cfg->clocks;
667 best = NULL;
668
669 if (cfg->clocks_size < 2) {
670 if (cfg->clocks_size == 0)
671 clkp = &tmp_clksrc;
672
673 /* check to see if we're sourcing fclk, and if so we're
674 * going to have to update the clock source
675 */
676
677 if (strcmp(clkp->name, "fclk") == 0) {
678 struct s3c24xx_uart_clksrc src;
679
680 s3c24xx_serial_getsource(port, &src);
681
682 /* check that the port already using fclk, and if
683 * not, then re-select fclk
684 */
685
686 if (strcmp(src.name, clkp->name) == 0) {
687 s3c24xx_serial_setsource(port, clkp);
688 s3c24xx_serial_getsource(port, &src);
689 }
690
691 clkp->divisor = src.divisor;
692 }
693
694 s3c24xx_serial_calcbaud(res, port, clkp, baud);
695 best = res;
696 resptr = best + 1;
697 } else {
698 resptr = res;
699
700 for (i = 0; i < cfg->clocks_size; i++, clkp++) {
701 if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud))
702 resptr++;
703 }
704 }
705
706 /* ok, we now need to select the best clock we found */
707
708 if (!best) {
709 unsigned int deviation = (1<<30)|((1<<30)-1);
710 int calc_deviation;
711
712 for (sptr = res; sptr < resptr; sptr++) {
713 printk(KERN_DEBUG
714 "found clk %p (%s) quot %d, calc %d\n",
715 sptr->clksrc, sptr->clksrc->name,
716 sptr->quot, sptr->calc);
717
718 calc_deviation = baud - sptr->calc;
719 if (calc_deviation < 0)
720 calc_deviation = -calc_deviation;
721
722 if (calc_deviation < deviation) {
723 best = sptr;
724 deviation = calc_deviation;
725 }
726 }
727
728 printk(KERN_DEBUG "best %p (deviation %d)\n", best, deviation);
729 }
730
731 printk(KERN_DEBUG "selected clock %p (%s) quot %d, calc %d\n",
732 best->clksrc, best->clksrc->name, best->quot, best->calc);
733
734 /* store results to pass back */
735
736 *clksrc = best->clksrc;
737 *clk = best->src;
738
739 return best->quot;
740 }
741
742 static void s3c24xx_serial_set_termios(struct uart_port *port,
743 struct termios *termios,
744 struct termios *old)
745 {
746 struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
747 struct s3c24xx_uart_port *ourport = to_ourport(port);
748 struct s3c24xx_uart_clksrc *clksrc = NULL;
749 struct clk *clk = NULL;
750 unsigned long flags;
751 unsigned int baud, quot;
752 unsigned int ulcon;
753 unsigned int umcon;
754
755 /*
756 * We don't support modem control lines.
757 */
758 termios->c_cflag &= ~(HUPCL | CMSPAR);
759 termios->c_cflag |= CLOCAL;
760
761 /*
762 * Ask the core to calculate the divisor for us.
763 */
764
765 baud = uart_get_baud_rate(port, termios, old, 0, 115200*8);
766
767 if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
768 quot = port->custom_divisor;
769 else
770 quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud);
771
772 /* check to see if we need to change clock source */
773
774 if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
775 s3c24xx_serial_setsource(port, clksrc);
776
777 if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
778 clk_disable(ourport->baudclk);
779 ourport->baudclk = NULL;
780 }
781
782 clk_enable(clk);
783
784 ourport->clksrc = clksrc;
785 ourport->baudclk = clk;
786 }
787
788 switch (termios->c_cflag & CSIZE) {
789 case CS5:
790 dbg("config: 5bits/char\n");
791 ulcon = S3C2410_LCON_CS5;
792 break;
793 case CS6:
794 dbg("config: 6bits/char\n");
795 ulcon = S3C2410_LCON_CS6;
796 break;
797 case CS7:
798 dbg("config: 7bits/char\n");
799 ulcon = S3C2410_LCON_CS7;
800 break;
801 case CS8:
802 default:
803 dbg("config: 8bits/char\n");
804 ulcon = S3C2410_LCON_CS8;
805 break;
806 }
807
808 /* preserve original lcon IR settings */
809 ulcon |= (cfg->ulcon & S3C2410_LCON_IRM);
810
811 if (termios->c_cflag & CSTOPB)
812 ulcon |= S3C2410_LCON_STOPB;
813
814 umcon = (termios->c_cflag & CRTSCTS) ? S3C2410_UMCOM_AFC : 0;
815
816 if (termios->c_cflag & PARENB) {
817 if (termios->c_cflag & PARODD)
818 ulcon |= S3C2410_LCON_PODD;
819 else
820 ulcon |= S3C2410_LCON_PEVEN;
821 } else {
822 ulcon |= S3C2410_LCON_PNONE;
823 }
824
825 spin_lock_irqsave(&port->lock, flags);
826
827 dbg("setting ulcon to %08x, brddiv to %d\n", ulcon, quot);
828
829 wr_regl(port, S3C2410_ULCON, ulcon);
830 wr_regl(port, S3C2410_UBRDIV, quot);
831 wr_regl(port, S3C2410_UMCON, umcon);
832
833 dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
834 rd_regl(port, S3C2410_ULCON),
835 rd_regl(port, S3C2410_UCON),
836 rd_regl(port, S3C2410_UFCON));
837
838 /*
839 * Update the per-port timeout.
840 */
841 uart_update_timeout(port, termios->c_cflag, baud);
842
843 /*
844 * Which character status flags are we interested in?
845 */
846 port->read_status_mask = S3C2410_UERSTAT_OVERRUN;
847 if (termios->c_iflag & INPCK)
848 port->read_status_mask |= S3C2410_UERSTAT_FRAME | S3C2410_UERSTAT_PARITY;
849
850 /*
851 * Which character status flags should we ignore?
852 */
853 port->ignore_status_mask = 0;
854 if (termios->c_iflag & IGNPAR)
855 port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN;
856 if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR)
857 port->ignore_status_mask |= S3C2410_UERSTAT_FRAME;
858
859 /*
860 * Ignore all characters if CREAD is not set.
861 */
862 if ((termios->c_cflag & CREAD) == 0)
863 port->ignore_status_mask |= RXSTAT_DUMMY_READ;
864
865 spin_unlock_irqrestore(&port->lock, flags);
866 }
867
868 static const char *s3c24xx_serial_type(struct uart_port *port)
869 {
870 switch (port->type) {
871 case PORT_S3C2410:
872 return "S3C2410";
873 case PORT_S3C2440:
874 return "S3C2440";
875 default:
876 return NULL;
877 }
878 }
879
880 #define MAP_SIZE (0x100)
881
882 static void s3c24xx_serial_release_port(struct uart_port *port)
883 {
884 release_mem_region(port->mapbase, MAP_SIZE);
885 }
886
887 static int s3c24xx_serial_request_port(struct uart_port *port)
888 {
889 const char *name = s3c24xx_serial_portname(port);
890 return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY;
891 }
892
893 static void s3c24xx_serial_config_port(struct uart_port *port, int flags)
894 {
895 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
896
897 if (flags & UART_CONFIG_TYPE &&
898 s3c24xx_serial_request_port(port) == 0)
899 port->type = info->type;
900 }
901
902 /*
903 * verify the new serial_struct (for TIOCSSERIAL).
904 */
905 static int
906 s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
907 {
908 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
909
910 if (ser->type != PORT_UNKNOWN && ser->type != info->type)
911 return -EINVAL;
912
913 return 0;
914 }
915
916
917 #ifdef CONFIG_SERIAL_S3C2410_CONSOLE
918
919 static struct console s3c24xx_serial_console;
920
921 #define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console
922 #else
923 #define S3C24XX_SERIAL_CONSOLE NULL
924 #endif
925
926 static struct uart_ops s3c24xx_serial_ops = {
927 .pm = s3c24xx_serial_pm,
928 .tx_empty = s3c24xx_serial_tx_empty,
929 .get_mctrl = s3c24xx_serial_get_mctrl,
930 .set_mctrl = s3c24xx_serial_set_mctrl,
931 .stop_tx = s3c24xx_serial_stop_tx,
932 .start_tx = s3c24xx_serial_start_tx,
933 .stop_rx = s3c24xx_serial_stop_rx,
934 .enable_ms = s3c24xx_serial_enable_ms,
935 .break_ctl = s3c24xx_serial_break_ctl,
936 .startup = s3c24xx_serial_startup,
937 .shutdown = s3c24xx_serial_shutdown,
938 .set_termios = s3c24xx_serial_set_termios,
939 .type = s3c24xx_serial_type,
940 .release_port = s3c24xx_serial_release_port,
941 .request_port = s3c24xx_serial_request_port,
942 .config_port = s3c24xx_serial_config_port,
943 .verify_port = s3c24xx_serial_verify_port,
944 };
945
946
947 static struct uart_driver s3c24xx_uart_drv = {
948 .owner = THIS_MODULE,
949 .dev_name = "s3c2410_serial",
950 .nr = 3,
951 .cons = S3C24XX_SERIAL_CONSOLE,
952 .driver_name = S3C24XX_SERIAL_NAME,
953 .devfs_name = S3C24XX_SERIAL_DEVFS,
954 .major = S3C24XX_SERIAL_MAJOR,
955 .minor = S3C24XX_SERIAL_MINOR,
956 };
957
958 static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
959 [0] = {
960 .port = {
961 .lock = SPIN_LOCK_UNLOCKED,
962 .iotype = UPIO_MEM,
963 .irq = IRQ_S3CUART_RX0,
964 .uartclk = 0,
965 .fifosize = 16,
966 .ops = &s3c24xx_serial_ops,
967 .flags = UPF_BOOT_AUTOCONF,
968 .line = 0,
969 }
970 },
971 [1] = {
972 .port = {
973 .lock = SPIN_LOCK_UNLOCKED,
974 .iotype = UPIO_MEM,
975 .irq = IRQ_S3CUART_RX1,
976 .uartclk = 0,
977 .fifosize = 16,
978 .ops = &s3c24xx_serial_ops,
979 .flags = UPF_BOOT_AUTOCONF,
980 .line = 1,
981 }
982 },
983 #if NR_PORTS > 2
984
985 [2] = {
986 .port = {
987 .lock = SPIN_LOCK_UNLOCKED,
988 .iotype = UPIO_MEM,
989 .irq = IRQ_S3CUART_RX2,
990 .uartclk = 0,
991 .fifosize = 16,
992 .ops = &s3c24xx_serial_ops,
993 .flags = UPF_BOOT_AUTOCONF,
994 .line = 2,
995 }
996 }
997 #endif
998 };
999
1000 /* s3c24xx_serial_resetport
1001 *
1002 * wrapper to call the specific reset for this port (reset the fifos
1003 * and the settings)
1004 */
1005
1006 static inline int s3c24xx_serial_resetport(struct uart_port * port,
1007 struct s3c2410_uartcfg *cfg)
1008 {
1009 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1010
1011 return (info->reset_port)(port, cfg);
1012 }
1013
1014 /* s3c24xx_serial_init_port
1015 *
1016 * initialise a single serial port from the platform device given
1017 */
1018
1019 static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
1020 struct s3c24xx_uart_info *info,
1021 struct platform_device *platdev)
1022 {
1023 struct uart_port *port = &ourport->port;
1024 struct s3c2410_uartcfg *cfg;
1025 struct resource *res;
1026
1027 dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev);
1028
1029 if (platdev == NULL)
1030 return -ENODEV;
1031
1032 cfg = s3c24xx_dev_to_cfg(&platdev->dev);
1033
1034 if (port->mapbase != 0)
1035 return 0;
1036
1037 if (cfg->hwport > 3)
1038 return -EINVAL;
1039
1040 /* setup info for port */
1041 port->dev = &platdev->dev;
1042 ourport->info = info;
1043
1044 /* copy the info in from provided structure */
1045 ourport->port.fifosize = info->fifosize;
1046
1047 dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport);
1048
1049 port->uartclk = 1;
1050
1051 if (cfg->uart_flags & UPF_CONS_FLOW) {
1052 dbg("s3c24xx_serial_init_port: enabling flow control\n");
1053 port->flags |= UPF_CONS_FLOW;
1054 }
1055
1056 /* sort our the physical and virtual addresses for each UART */
1057
1058 res = platform_get_resource(platdev, IORESOURCE_MEM, 0);
1059 if (res == NULL) {
1060 printk(KERN_ERR "failed to find memory resource for uart\n");
1061 return -EINVAL;
1062 }
1063
1064 dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
1065
1066 port->mapbase = res->start;
1067 port->membase = S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART);
1068 port->irq = platform_get_irq(platdev, 0);
1069 if (port->irq < 0)
1070 port->irq = 0;
1071
1072 ourport->clk = clk_get(&platdev->dev, "uart");
1073
1074 dbg("port: map=%08x, mem=%08x, irq=%d, clock=%ld\n",
1075 port->mapbase, port->membase, port->irq, port->uartclk);
1076
1077 /* reset the fifos (and setup the uart) */
1078 s3c24xx_serial_resetport(port, cfg);
1079 return 0;
1080 }
1081
1082 /* Device driver serial port probe */
1083
1084 static int probe_index = 0;
1085
1086 static int s3c24xx_serial_probe(struct platform_device *dev,
1087 struct s3c24xx_uart_info *info)
1088 {
1089 struct s3c24xx_uart_port *ourport;
1090 int ret;
1091
1092 dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index);
1093
1094 ourport = &s3c24xx_serial_ports[probe_index];
1095 probe_index++;
1096
1097 dbg("%s: initialising port %p...\n", __FUNCTION__, ourport);
1098
1099 ret = s3c24xx_serial_init_port(ourport, info, dev);
1100 if (ret < 0)
1101 goto probe_err;
1102
1103 dbg("%s: adding port\n", __FUNCTION__);
1104 uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
1105 platform_set_drvdata(dev, &ourport->port);
1106
1107 return 0;
1108
1109 probe_err:
1110 return ret;
1111 }
1112
1113 static int s3c24xx_serial_remove(struct platform_device *dev)
1114 {
1115 struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
1116
1117 if (port)
1118 uart_remove_one_port(&s3c24xx_uart_drv, port);
1119
1120 return 0;
1121 }
1122
1123 /* UART power management code */
1124
1125 #ifdef CONFIG_PM
1126
1127 static int s3c24xx_serial_suspend(struct platform_device *dev, pm_message_t state)
1128 {
1129 struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
1130
1131 if (port)
1132 uart_suspend_port(&s3c24xx_uart_drv, port);
1133
1134 return 0;
1135 }
1136
1137 static int s3c24xx_serial_resume(struct platform_device *dev)
1138 {
1139 struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
1140 struct s3c24xx_uart_port *ourport = to_ourport(port);
1141
1142 if (port) {
1143 clk_enable(ourport->clk);
1144 s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
1145 clk_disable(ourport->clk);
1146
1147 uart_resume_port(&s3c24xx_uart_drv, port);
1148 }
1149
1150 return 0;
1151 }
1152
1153 #else
1154 #define s3c24xx_serial_suspend NULL
1155 #define s3c24xx_serial_resume NULL
1156 #endif
1157
1158 static int s3c24xx_serial_init(struct platform_driver *drv,
1159 struct s3c24xx_uart_info *info)
1160 {
1161 dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
1162 return platform_driver_register(drv);
1163 }
1164
1165
1166 /* now comes the code to initialise either the s3c2410 or s3c2440 serial
1167 * port information
1168 */
1169
1170 /* cpu specific variations on the serial port support */
1171
1172 #ifdef CONFIG_CPU_S3C2400
1173
1174 static int s3c2400_serial_getsource(struct uart_port *port,
1175 struct s3c24xx_uart_clksrc *clk)
1176 {
1177 clk->divisor = 1;
1178 clk->name = "pclk";
1179
1180 return 0;
1181 }
1182
1183 static int s3c2400_serial_setsource(struct uart_port *port,
1184 struct s3c24xx_uart_clksrc *clk)
1185 {
1186 return 0;
1187 }
1188
1189 static int s3c2400_serial_resetport(struct uart_port *port,
1190 struct s3c2410_uartcfg *cfg)
1191 {
1192 dbg("s3c2400_serial_resetport: port=%p (%08lx), cfg=%p\n",
1193 port, port->mapbase, cfg);
1194
1195 wr_regl(port, S3C2410_UCON, cfg->ucon);
1196 wr_regl(port, S3C2410_ULCON, cfg->ulcon);
1197
1198 /* reset both fifos */
1199
1200 wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
1201 wr_regl(port, S3C2410_UFCON, cfg->ufcon);
1202
1203 return 0;
1204 }
1205
1206 static struct s3c24xx_uart_info s3c2400_uart_inf = {
1207 .name = "Samsung S3C2400 UART",
1208 .type = PORT_S3C2400,
1209 .fifosize = 16,
1210 .rx_fifomask = S3C2410_UFSTAT_RXMASK,
1211 .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
1212 .rx_fifofull = S3C2410_UFSTAT_RXFULL,
1213 .tx_fifofull = S3C2410_UFSTAT_TXFULL,
1214 .tx_fifomask = S3C2410_UFSTAT_TXMASK,
1215 .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT,
1216 .get_clksrc = s3c2400_serial_getsource,
1217 .set_clksrc = s3c2400_serial_setsource,
1218 .reset_port = s3c2400_serial_resetport,
1219 };
1220
1221 static int s3c2400_serial_probe(struct platform_device *dev)
1222 {
1223 return s3c24xx_serial_probe(dev, &s3c2400_uart_inf);
1224 }
1225
1226 static struct platform_driver s3c2400_serial_drv = {
1227 .probe = s3c2400_serial_probe,
1228 .remove = s3c24xx_serial_remove,
1229 .suspend = s3c24xx_serial_suspend,
1230 .resume = s3c24xx_serial_resume,
1231 .driver = {
1232 .name = "s3c2400-uart",
1233 .owner = THIS_MODULE,
1234 },
1235 };
1236
1237 static inline int s3c2400_serial_init(void)
1238 {
1239 return s3c24xx_serial_init(&s3c2400_serial_drv, &s3c2400_uart_inf);
1240 }
1241
1242 static inline void s3c2400_serial_exit(void)
1243 {
1244 platform_driver_unregister(&s3c2400_serial_drv);
1245 }
1246
1247 #define s3c2400_uart_inf_at &s3c2400_uart_inf
1248 #else
1249
1250 static inline int s3c2400_serial_init(void)
1251 {
1252 return 0;
1253 }
1254
1255 static inline void s3c2400_serial_exit(void)
1256 {
1257 }
1258
1259 #define s3c2400_uart_inf_at NULL
1260
1261 #endif /* CONFIG_CPU_S3C2400 */
1262
1263 /* S3C2410 support */
1264
1265 #ifdef CONFIG_CPU_S3C2410
1266
1267 static int s3c2410_serial_setsource(struct uart_port *port,
1268 struct s3c24xx_uart_clksrc *clk)
1269 {
1270 unsigned long ucon = rd_regl(port, S3C2410_UCON);
1271
1272 if (strcmp(clk->name, "uclk") == 0)
1273 ucon |= S3C2410_UCON_UCLK;
1274 else
1275 ucon &= ~S3C2410_UCON_UCLK;
1276
1277 wr_regl(port, S3C2410_UCON, ucon);
1278 return 0;
1279 }
1280
1281 static int s3c2410_serial_getsource(struct uart_port *port,
1282 struct s3c24xx_uart_clksrc *clk)
1283 {
1284 unsigned long ucon = rd_regl(port, S3C2410_UCON);
1285
1286 clk->divisor = 1;
1287 clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk";
1288
1289 return 0;
1290 }
1291
1292 static int s3c2410_serial_resetport(struct uart_port *port,
1293 struct s3c2410_uartcfg *cfg)
1294 {
1295 dbg("s3c2410_serial_resetport: port=%p (%08lx), cfg=%p\n",
1296 port, port->mapbase, cfg);
1297
1298 wr_regl(port, S3C2410_UCON, cfg->ucon);
1299 wr_regl(port, S3C2410_ULCON, cfg->ulcon);
1300
1301 /* reset both fifos */
1302
1303 wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
1304 wr_regl(port, S3C2410_UFCON, cfg->ufcon);
1305
1306 return 0;
1307 }
1308
1309 static struct s3c24xx_uart_info s3c2410_uart_inf = {
1310 .name = "Samsung S3C2410 UART",
1311 .type = PORT_S3C2410,
1312 .fifosize = 16,
1313 .rx_fifomask = S3C2410_UFSTAT_RXMASK,
1314 .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
1315 .rx_fifofull = S3C2410_UFSTAT_RXFULL,
1316 .tx_fifofull = S3C2410_UFSTAT_TXFULL,
1317 .tx_fifomask = S3C2410_UFSTAT_TXMASK,
1318 .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT,
1319 .get_clksrc = s3c2410_serial_getsource,
1320 .set_clksrc = s3c2410_serial_setsource,
1321 .reset_port = s3c2410_serial_resetport,
1322 };
1323
1324 /* device management */
1325
1326 static int s3c2410_serial_probe(struct platform_device *dev)
1327 {
1328 return s3c24xx_serial_probe(dev, &s3c2410_uart_inf);
1329 }
1330
1331 static struct platform_driver s3c2410_serial_drv = {
1332 .probe = s3c2410_serial_probe,
1333 .remove = s3c24xx_serial_remove,
1334 .suspend = s3c24xx_serial_suspend,
1335 .resume = s3c24xx_serial_resume,
1336 .driver = {
1337 .name = "s3c2410-uart",
1338 .owner = THIS_MODULE,
1339 },
1340 };
1341
1342 static inline int s3c2410_serial_init(void)
1343 {
1344 return s3c24xx_serial_init(&s3c2410_serial_drv, &s3c2410_uart_inf);
1345 }
1346
1347 static inline void s3c2410_serial_exit(void)
1348 {
1349 platform_driver_unregister(&s3c2410_serial_drv);
1350 }
1351
1352 #define s3c2410_uart_inf_at &s3c2410_uart_inf
1353 #else
1354
1355 static inline int s3c2410_serial_init(void)
1356 {
1357 return 0;
1358 }
1359
1360 static inline void s3c2410_serial_exit(void)
1361 {
1362 }
1363
1364 #define s3c2410_uart_inf_at NULL
1365
1366 #endif /* CONFIG_CPU_S3C2410 */
1367
1368 #ifdef CONFIG_CPU_S3C2440
1369
1370 static int s3c2440_serial_setsource(struct uart_port *port,
1371 struct s3c24xx_uart_clksrc *clk)
1372 {
1373 unsigned long ucon = rd_regl(port, S3C2410_UCON);
1374
1375 // todo - proper fclk<>nonfclk switch //
1376
1377 ucon &= ~S3C2440_UCON_CLKMASK;
1378
1379 if (strcmp(clk->name, "uclk") == 0)
1380 ucon |= S3C2440_UCON_UCLK;
1381 else if (strcmp(clk->name, "pclk") == 0)
1382 ucon |= S3C2440_UCON_PCLK;
1383 else if (strcmp(clk->name, "fclk") == 0)
1384 ucon |= S3C2440_UCON_FCLK;
1385 else {
1386 printk(KERN_ERR "unknown clock source %s\n", clk->name);
1387 return -EINVAL;
1388 }
1389
1390 wr_regl(port, S3C2410_UCON, ucon);
1391 return 0;
1392 }
1393
1394
1395 static int s3c2440_serial_getsource(struct uart_port *port,
1396 struct s3c24xx_uart_clksrc *clk)
1397 {
1398 unsigned long ucon = rd_regl(port, S3C2410_UCON);
1399 unsigned long ucon0, ucon1, ucon2;
1400
1401 switch (ucon & S3C2440_UCON_CLKMASK) {
1402 case S3C2440_UCON_UCLK:
1403 clk->divisor = 1;
1404 clk->name = "uclk";
1405 break;
1406
1407 case S3C2440_UCON_PCLK:
1408 case S3C2440_UCON_PCLK2:
1409 clk->divisor = 1;
1410 clk->name = "pclk";
1411 break;
1412
1413 case S3C2440_UCON_FCLK:
1414 /* the fun of calculating the uart divisors on
1415 * the s3c2440 */
1416
1417 ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
1418 ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
1419 ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
1420
1421 printk("ucons: %08lx, %08lx, %08lx\n", ucon0, ucon1, ucon2);
1422
1423 ucon0 &= S3C2440_UCON0_DIVMASK;
1424 ucon1 &= S3C2440_UCON1_DIVMASK;
1425 ucon2 &= S3C2440_UCON2_DIVMASK;
1426
1427 if (ucon0 != 0) {
1428 clk->divisor = ucon0 >> S3C2440_UCON_DIVSHIFT;
1429 clk->divisor += 6;
1430 } else if (ucon1 != 0) {
1431 clk->divisor = ucon1 >> S3C2440_UCON_DIVSHIFT;
1432 clk->divisor += 21;
1433 } else if (ucon2 != 0) {
1434 clk->divisor = ucon2 >> S3C2440_UCON_DIVSHIFT;
1435 clk->divisor += 36;
1436 } else {
1437 /* manual calims 44, seems to be 9 */
1438 clk->divisor = 9;
1439 }
1440
1441 clk->name = "fclk";
1442 break;
1443 }
1444
1445 return 0;
1446 }
1447
1448 static int s3c2440_serial_resetport(struct uart_port *port,
1449 struct s3c2410_uartcfg *cfg)
1450 {
1451 unsigned long ucon = rd_regl(port, S3C2410_UCON);
1452
1453 dbg("s3c2440_serial_resetport: port=%p (%08lx), cfg=%p\n",
1454 port, port->mapbase, cfg);
1455
1456 /* ensure we don't change the clock settings... */
1457
1458 ucon &= (S3C2440_UCON0_DIVMASK | (3<<10));
1459
1460 wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
1461 wr_regl(port, S3C2410_ULCON, cfg->ulcon);
1462
1463 /* reset both fifos */
1464
1465 wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
1466 wr_regl(port, S3C2410_UFCON, cfg->ufcon);
1467
1468 return 0;
1469 }
1470
1471 static struct s3c24xx_uart_info s3c2440_uart_inf = {
1472 .name = "Samsung S3C2440 UART",
1473 .type = PORT_S3C2440,
1474 .fifosize = 64,
1475 .rx_fifomask = S3C2440_UFSTAT_RXMASK,
1476 .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
1477 .rx_fifofull = S3C2440_UFSTAT_RXFULL,
1478 .tx_fifofull = S3C2440_UFSTAT_TXFULL,
1479 .tx_fifomask = S3C2440_UFSTAT_TXMASK,
1480 .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
1481 .get_clksrc = s3c2440_serial_getsource,
1482 .set_clksrc = s3c2440_serial_setsource,
1483 .reset_port = s3c2440_serial_resetport,
1484 };
1485
1486 /* device management */
1487
1488 static int s3c2440_serial_probe(struct platform_device *dev)
1489 {
1490 dbg("s3c2440_serial_probe: dev=%p\n", dev);
1491 return s3c24xx_serial_probe(dev, &s3c2440_uart_inf);
1492 }
1493
1494 static struct platform_driver s3c2440_serial_drv = {
1495 .probe = s3c2440_serial_probe,
1496 .remove = s3c24xx_serial_remove,
1497 .suspend = s3c24xx_serial_suspend,
1498 .resume = s3c24xx_serial_resume,
1499 .driver = {
1500 .name = "s3c2440-uart",
1501 .owner = THIS_MODULE,
1502 },
1503 };
1504
1505
1506 static inline int s3c2440_serial_init(void)
1507 {
1508 return s3c24xx_serial_init(&s3c2440_serial_drv, &s3c2440_uart_inf);
1509 }
1510
1511 static inline void s3c2440_serial_exit(void)
1512 {
1513 platform_driver_unregister(&s3c2440_serial_drv);
1514 }
1515
1516 #define s3c2440_uart_inf_at &s3c2440_uart_inf
1517 #else
1518
1519 static inline int s3c2440_serial_init(void)
1520 {
1521 return 0;
1522 }
1523
1524 static inline void s3c2440_serial_exit(void)
1525 {
1526 }
1527
1528 #define s3c2440_uart_inf_at NULL
1529 #endif /* CONFIG_CPU_S3C2440 */
1530
1531 /* module initialisation code */
1532
1533 static int __init s3c24xx_serial_modinit(void)
1534 {
1535 int ret;
1536
1537 ret = uart_register_driver(&s3c24xx_uart_drv);
1538 if (ret < 0) {
1539 printk(KERN_ERR "failed to register UART driver\n");
1540 return -1;
1541 }
1542
1543 s3c2400_serial_init();
1544 s3c2410_serial_init();
1545 s3c2440_serial_init();
1546
1547 return 0;
1548 }
1549
1550 static void __exit s3c24xx_serial_modexit(void)
1551 {
1552 s3c2400_serial_exit();
1553 s3c2410_serial_exit();
1554 s3c2440_serial_exit();
1555
1556 uart_unregister_driver(&s3c24xx_uart_drv);
1557 }
1558
1559
1560 module_init(s3c24xx_serial_modinit);
1561 module_exit(s3c24xx_serial_modexit);
1562
1563 /* Console code */
1564
1565 #ifdef CONFIG_SERIAL_S3C2410_CONSOLE
1566
1567 static struct uart_port *cons_uart;
1568
1569 static int
1570 s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
1571 {
1572 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1573 unsigned long ufstat, utrstat;
1574
1575 if (ufcon & S3C2410_UFCON_FIFOMODE) {
1576 /* fifo mode - check ammount of data in fifo registers... */
1577
1578 ufstat = rd_regl(port, S3C2410_UFSTAT);
1579 return (ufstat & info->tx_fifofull) ? 0 : 1;
1580 }
1581
1582 /* in non-fifo mode, we go and use the tx buffer empty */
1583
1584 utrstat = rd_regl(port, S3C2410_UTRSTAT);
1585 return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0;
1586 }
1587
1588 static void
1589 s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
1590 {
1591 unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
1592 while (!s3c24xx_serial_console_txrdy(port, ufcon))
1593 barrier();
1594 wr_regb(cons_uart, S3C2410_UTXH, ch);
1595 }
1596
1597 static void
1598 s3c24xx_serial_console_write(struct console *co, const char *s,
1599 unsigned int count)
1600 {
1601 uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar);
1602 }
1603
1604 static void __init
1605 s3c24xx_serial_get_options(struct uart_port *port, int *baud,
1606 int *parity, int *bits)
1607 {
1608 struct s3c24xx_uart_clksrc clksrc;
1609 struct clk *clk;
1610 unsigned int ulcon;
1611 unsigned int ucon;
1612 unsigned int ubrdiv;
1613 unsigned long rate;
1614
1615 ulcon = rd_regl(port, S3C2410_ULCON);
1616 ucon = rd_regl(port, S3C2410_UCON);
1617 ubrdiv = rd_regl(port, S3C2410_UBRDIV);
1618
1619 dbg("s3c24xx_serial_get_options: port=%p\n"
1620 "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n",
1621 port, ulcon, ucon, ubrdiv);
1622
1623 if ((ucon & 0xf) != 0) {
1624 /* consider the serial port configured if the tx/rx mode set */
1625
1626 switch (ulcon & S3C2410_LCON_CSMASK) {
1627 case S3C2410_LCON_CS5:
1628 *bits = 5;
1629 break;
1630 case S3C2410_LCON_CS6:
1631 *bits = 6;
1632 break;
1633 case S3C2410_LCON_CS7:
1634 *bits = 7;
1635 break;
1636 default:
1637 case S3C2410_LCON_CS8:
1638 *bits = 8;
1639 break;
1640 }
1641
1642 switch (ulcon & S3C2410_LCON_PMASK) {
1643 case S3C2410_LCON_PEVEN:
1644 *parity = 'e';
1645 break;
1646
1647 case S3C2410_LCON_PODD:
1648 *parity = 'o';
1649 break;
1650
1651 case S3C2410_LCON_PNONE:
1652 default:
1653 *parity = 'n';
1654 }
1655
1656 /* now calculate the baud rate */
1657
1658 s3c24xx_serial_getsource(port, &clksrc);
1659
1660 clk = clk_get(port->dev, clksrc.name);
1661 if (!IS_ERR(clk) && clk != NULL)
1662 rate = clk_get_rate(clk) / clksrc.divisor;
1663 else
1664 rate = 1;
1665
1666
1667 *baud = rate / ( 16 * (ubrdiv + 1));
1668 dbg("calculated baud %d\n", *baud);
1669 }
1670
1671 }
1672
1673 /* s3c24xx_serial_init_ports
1674 *
1675 * initialise the serial ports from the machine provided initialisation
1676 * data.
1677 */
1678
1679 static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
1680 {
1681 struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports;
1682 struct platform_device **platdev_ptr;
1683 int i;
1684
1685 dbg("s3c24xx_serial_init_ports: initialising ports...\n");
1686
1687 platdev_ptr = s3c24xx_uart_devs;
1688
1689 for (i = 0; i < NR_PORTS; i++, ptr++, platdev_ptr++) {
1690 s3c24xx_serial_init_port(ptr, info, *platdev_ptr);
1691 }
1692
1693 return 0;
1694 }
1695
1696 static int __init
1697 s3c24xx_serial_console_setup(struct console *co, char *options)
1698 {
1699 struct uart_port *port;
1700 int baud = 9600;
1701 int bits = 8;
1702 int parity = 'n';
1703 int flow = 'n';
1704
1705 dbg("s3c24xx_serial_console_setup: co=%p (%d), %s\n",
1706 co, co->index, options);
1707
1708 /* is this a valid port */
1709
1710 if (co->index == -1 || co->index >= NR_PORTS)
1711 co->index = 0;
1712
1713 port = &s3c24xx_serial_ports[co->index].port;
1714
1715 /* is the port configured? */
1716
1717 if (port->mapbase == 0x0) {
1718 co->index = 0;
1719 port = &s3c24xx_serial_ports[co->index].port;
1720 }
1721
1722 cons_uart = port;
1723
1724 dbg("s3c24xx_serial_console_setup: port=%p (%d)\n", port, co->index);
1725
1726 /*
1727 * Check whether an invalid uart number has been specified, and
1728 * if so, search for the first available port that does have
1729 * console support.
1730 */
1731 if (options)
1732 uart_parse_options(options, &baud, &parity, &bits, &flow);
1733 else
1734 s3c24xx_serial_get_options(port, &baud, &parity, &bits);
1735
1736 dbg("s3c24xx_serial_console_setup: baud %d\n", baud);
1737
1738 return uart_set_options(port, co, baud, parity, bits, flow);
1739 }
1740
1741 /* s3c24xx_serial_initconsole
1742 *
1743 * initialise the console from one of the uart drivers
1744 */
1745
1746 static struct console s3c24xx_serial_console =
1747 {
1748 .name = S3C24XX_SERIAL_NAME,
1749 .device = uart_console_device,
1750 .flags = CON_PRINTBUFFER,
1751 .index = -1,
1752 .write = s3c24xx_serial_console_write,
1753 .setup = s3c24xx_serial_console_setup
1754 };
1755
1756 static int s3c24xx_serial_initconsole(void)
1757 {
1758 struct s3c24xx_uart_info *info;
1759 struct platform_device *dev = s3c24xx_uart_devs[0];
1760
1761 dbg("s3c24xx_serial_initconsole\n");
1762
1763 /* select driver based on the cpu */
1764
1765 if (dev == NULL) {
1766 printk(KERN_ERR "s3c24xx: no devices for console init\n");
1767 return 0;
1768 }
1769
1770 if (strcmp(dev->name, "s3c2400-uart") == 0) {
1771 info = s3c2400_uart_inf_at;
1772 } else if (strcmp(dev->name, "s3c2410-uart") == 0) {
1773 info = s3c2410_uart_inf_at;
1774 } else if (strcmp(dev->name, "s3c2440-uart") == 0) {
1775 info = s3c2440_uart_inf_at;
1776 } else {
1777 printk(KERN_ERR "s3c24xx: no driver for %s\n", dev->name);
1778 return 0;
1779 }
1780
1781 if (info == NULL) {
1782 printk(KERN_ERR "s3c24xx: no driver for console\n");
1783 return 0;
1784 }
1785
1786 s3c24xx_serial_console.data = &s3c24xx_uart_drv;
1787 s3c24xx_serial_init_ports(info);
1788
1789 register_console(&s3c24xx_serial_console);
1790 return 0;
1791 }
1792
1793 console_initcall(s3c24xx_serial_initconsole);
1794
1795 #endif /* CONFIG_SERIAL_S3C2410_CONSOLE */
1796
1797 MODULE_LICENSE("GPL");
1798 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
1799 MODULE_DESCRIPTION("Samsung S3C2410/S3C2440 Serial port driver");
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree