?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[MTD] AMD Geode NAND support can depend on X86_32; we won't see it on x86_64
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / serial / ip22zilog.c
blob651772474ac17d6687b4722f337b06765c2e7524
1 /*
2 * Driver for Zilog serial chips found on SGI workstations and
3 * servers. This driver could actually be made more generic.
4 *
5 * This is based on the drivers/serial/sunzilog.c code as of 2.6.0-test7 and the
6 * old drivers/sgi/char/sgiserial.c code which itself is based of the original
7 * drivers/sbus/char/zs.c code. A lot of code has been simply moved over
8 * directly from there but much has been rewritten. Credits therefore go out
9 * to David S. Miller, Eddie C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell
10 * for their work there.
11 *
12 * Copyright (C) 2002 Ralf Baechle (ralf@linux-mips.org)
13 * Copyright (C) 2002 David S. Miller (davem@redhat.com)
14 */
15 #include <linux/config.h>
16 #include <linux/module.h>
17 #include <linux/kernel.h>
18 #include <linux/sched.h>
19 #include <linux/errno.h>
20 #include <linux/delay.h>
21 #include <linux/tty.h>
22 #include <linux/tty_flip.h>
23 #include <linux/major.h>
24 #include <linux/string.h>
25 #include <linux/ptrace.h>
26 #include <linux/ioport.h>
27 #include <linux/slab.h>
28 #include <linux/circ_buf.h>
29 #include <linux/serial.h>
30 #include <linux/sysrq.h>
31 #include <linux/console.h>
32 #include <linux/spinlock.h>
33 #include <linux/init.h>
34
35 #include <asm/io.h>
36 #include <asm/irq.h>
37 #include <asm/sgialib.h>
38 #include <asm/sgi/ioc.h>
39 #include <asm/sgi/hpc3.h>
40 #include <asm/sgi/ip22.h>
41
42 #if defined(CONFIG_SERIAL_IP22_ZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
43 #define SUPPORT_SYSRQ
44 #endif
45
46 #include <linux/serial_core.h>
47
48 #include "ip22zilog.h"
49
50 void ip22_do_break(void);
51
52 /*
53 * On IP22 we need to delay after register accesses but we do not need to
54 * flush writes.
55 */
56 #define ZSDELAY() udelay(5)
57 #define ZSDELAY_LONG() udelay(20)
58 #define ZS_WSYNC(channel) do { } while (0)
59
60 #define NUM_IP22ZILOG 1
61 #define NUM_CHANNELS (NUM_IP22ZILOG * 2)
62
63 #define ZS_CLOCK 3672000 /* Zilog input clock rate. */
64 #define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */
65
66 /*
67 * We wrap our port structure around the generic uart_port.
68 */
69 struct uart_ip22zilog_port {
70 struct uart_port port;
71
72 /* IRQ servicing chain. */
73 struct uart_ip22zilog_port *next;
74
75 /* Current values of Zilog write registers. */
76 unsigned char curregs[NUM_ZSREGS];
77
78 unsigned int flags;
79 #define IP22ZILOG_FLAG_IS_CONS 0x00000004
80 #define IP22ZILOG_FLAG_IS_KGDB 0x00000008
81 #define IP22ZILOG_FLAG_MODEM_STATUS 0x00000010
82 #define IP22ZILOG_FLAG_IS_CHANNEL_A 0x00000020
83 #define IP22ZILOG_FLAG_REGS_HELD 0x00000040
84 #define IP22ZILOG_FLAG_TX_STOPPED 0x00000080
85 #define IP22ZILOG_FLAG_TX_ACTIVE 0x00000100
86
87 unsigned int cflag;
88
89 /* L1-A keyboard break state. */
90 int kbd_id;
91 int l1_down;
92
93 unsigned char parity_mask;
94 unsigned char prev_status;
95 };
96
97 #define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel *)((PORT)->membase))
98 #define UART_ZILOG(PORT) ((struct uart_ip22zilog_port *)(PORT))
99 #define IP22ZILOG_GET_CURR_REG(PORT, REGNUM) \
100 (UART_ZILOG(PORT)->curregs[REGNUM])
101 #define IP22ZILOG_SET_CURR_REG(PORT, REGNUM, REGVAL) \
102 ((UART_ZILOG(PORT)->curregs[REGNUM]) = (REGVAL))
103 #define ZS_IS_CONS(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_CONS)
104 #define ZS_IS_KGDB(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_KGDB)
105 #define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & IP22ZILOG_FLAG_MODEM_STATUS)
106 #define ZS_IS_CHANNEL_A(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_CHANNEL_A)
107 #define ZS_REGS_HELD(UP) ((UP)->flags & IP22ZILOG_FLAG_REGS_HELD)
108 #define ZS_TX_STOPPED(UP) ((UP)->flags & IP22ZILOG_FLAG_TX_STOPPED)
109 #define ZS_TX_ACTIVE(UP) ((UP)->flags & IP22ZILOG_FLAG_TX_ACTIVE)
110
111 /* Reading and writing Zilog8530 registers. The delays are to make this
112 * driver work on the IP22 which needs a settling delay after each chip
113 * register access, other machines handle this in hardware via auxiliary
114 * flip-flops which implement the settle time we do in software.
115 *
116 * The port lock must be held and local IRQs must be disabled
117 * when {read,write}_zsreg is invoked.
118 */
119 static unsigned char read_zsreg(struct zilog_channel *channel,
120 unsigned char reg)
121 {
122 unsigned char retval;
123
124 writeb(reg, &channel->control);
125 ZSDELAY();
126 retval = readb(&channel->control);
127 ZSDELAY();
128
129 return retval;
130 }
131
132 static void write_zsreg(struct zilog_channel *channel,
133 unsigned char reg, unsigned char value)
134 {
135 writeb(reg, &channel->control);
136 ZSDELAY();
137 writeb(value, &channel->control);
138 ZSDELAY();
139 }
140
141 static void ip22zilog_clear_fifo(struct zilog_channel *channel)
142 {
143 int i;
144
145 for (i = 0; i < 32; i++) {
146 unsigned char regval;
147
148 regval = readb(&channel->control);
149 ZSDELAY();
150 if (regval & Rx_CH_AV)
151 break;
152
153 regval = read_zsreg(channel, R1);
154 readb(&channel->data);
155 ZSDELAY();
156
157 if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) {
158 writeb(ERR_RES, &channel->control);
159 ZSDELAY();
160 ZS_WSYNC(channel);
161 }
162 }
163 }
164
165 /* This function must only be called when the TX is not busy. The UART
166 * port lock must be held and local interrupts disabled.
167 */
168 static void __load_zsregs(struct zilog_channel *channel, unsigned char *regs)
169 {
170 int i;
171
172 /* Let pending transmits finish. */
173 for (i = 0; i < 1000; i++) {
174 unsigned char stat = read_zsreg(channel, R1);
175 if (stat & ALL_SNT)
176 break;
177 udelay(100);
178 }
179
180 writeb(ERR_RES, &channel->control);
181 ZSDELAY();
182 ZS_WSYNC(channel);
183
184 ip22zilog_clear_fifo(channel);
185
186 /* Disable all interrupts. */
187 write_zsreg(channel, R1,
188 regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB));
189
190 /* Set parity, sync config, stop bits, and clock divisor. */
191 write_zsreg(channel, R4, regs[R4]);
192
193 /* Set misc. TX/RX control bits. */
194 write_zsreg(channel, R10, regs[R10]);
195
196 /* Set TX/RX controls sans the enable bits. */
197 write_zsreg(channel, R3, regs[R3] & ~RxENAB);
198 write_zsreg(channel, R5, regs[R5] & ~TxENAB);
199
200 /* Synchronous mode config. */
201 write_zsreg(channel, R6, regs[R6]);
202 write_zsreg(channel, R7, regs[R7]);
203
204 /* Don't mess with the interrupt vector (R2, unused by us) and
205 * master interrupt control (R9). We make sure this is setup
206 * properly at probe time then never touch it again.
207 */
208
209 /* Disable baud generator. */
210 write_zsreg(channel, R14, regs[R14] & ~BRENAB);
211
212 /* Clock mode control. */
213 write_zsreg(channel, R11, regs[R11]);
214
215 /* Lower and upper byte of baud rate generator divisor. */
216 write_zsreg(channel, R12, regs[R12]);
217 write_zsreg(channel, R13, regs[R13]);
218
219 /* Now rewrite R14, with BRENAB (if set). */
220 write_zsreg(channel, R14, regs[R14]);
221
222 /* External status interrupt control. */
223 write_zsreg(channel, R15, regs[R15]);
224
225 /* Reset external status interrupts. */
226 write_zsreg(channel, R0, RES_EXT_INT);
227 write_zsreg(channel, R0, RES_EXT_INT);
228
229 /* Rewrite R3/R5, this time without enables masked. */
230 write_zsreg(channel, R3, regs[R3]);
231 write_zsreg(channel, R5, regs[R5]);
232
233 /* Rewrite R1, this time without IRQ enabled masked. */
234 write_zsreg(channel, R1, regs[R1]);
235 }
236
237 /* Reprogram the Zilog channel HW registers with the copies found in the
238 * software state struct. If the transmitter is busy, we defer this update
239 * until the next TX complete interrupt. Else, we do it right now.
240 *
241 * The UART port lock must be held and local interrupts disabled.
242 */
243 static void ip22zilog_maybe_update_regs(struct uart_ip22zilog_port *up,
244 struct zilog_channel *channel)
245 {
246 if (!ZS_REGS_HELD(up)) {
247 if (ZS_TX_ACTIVE(up)) {
248 up->flags |= IP22ZILOG_FLAG_REGS_HELD;
249 } else {
250 __load_zsregs(channel, up->curregs);
251 }
252 }
253 }
254
255 static void ip22zilog_receive_chars(struct uart_ip22zilog_port *up,
256 struct zilog_channel *channel,
257 struct pt_regs *regs)
258 {
259 struct tty_struct *tty = up->port.info->tty; /* XXX info==NULL? */
260
261 while (1) {
262 unsigned char ch, r1, flag;
263
264 r1 = read_zsreg(channel, R1);
265 if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
266 writeb(ERR_RES, &channel->control);
267 ZSDELAY();
268 ZS_WSYNC(channel);
269 }
270
271 ch = readb(&channel->control);
272 ZSDELAY();
273
274 /* This funny hack depends upon BRK_ABRT not interfering
275 * with the other bits we care about in R1.
276 */
277 if (ch & BRK_ABRT)
278 r1 |= BRK_ABRT;
279
280 ch = readb(&channel->data);
281 ZSDELAY();
282
283 ch &= up->parity_mask;
284
285 if (ZS_IS_CONS(up) && (r1 & BRK_ABRT)) {
286 /* Wait for BREAK to deassert to avoid potentially
287 * confusing the PROM.
288 */
289 while (1) {
290 ch = readb(&channel->control);
291 ZSDELAY();
292 if (!(ch & BRK_ABRT))
293 break;
294 }
295 ip22_do_break();
296 return;
297 }
298
299 /* A real serial line, record the character and status. */
300 flag = TTY_NORMAL;
301 up->port.icount.rx++;
302 if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) {
303 if (r1 & BRK_ABRT) {
304 r1 &= ~(PAR_ERR | CRC_ERR);
305 up->port.icount.brk++;
306 if (uart_handle_break(&up->port))
307 goto next_char;
308 }
309 else if (r1 & PAR_ERR)
310 up->port.icount.parity++;
311 else if (r1 & CRC_ERR)
312 up->port.icount.frame++;
313 if (r1 & Rx_OVR)
314 up->port.icount.overrun++;
315 r1 &= up->port.read_status_mask;
316 if (r1 & BRK_ABRT)
317 flag = TTY_BREAK;
318 else if (r1 & PAR_ERR)
319 flag = TTY_PARITY;
320 else if (r1 & CRC_ERR)
321 flag = TTY_FRAME;
322 }
323 if (uart_handle_sysrq_char(&up->port, ch, regs))
324 goto next_char;
325
326 if (up->port.ignore_status_mask == 0xff ||
327 (r1 & up->port.ignore_status_mask) == 0)
328 tty_insert_flip_char(tty, ch, flag);
329
330 if (r1 & Rx_OVR)
331 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
332 next_char:
333 ch = readb(&channel->control);
334 ZSDELAY();
335 if (!(ch & Rx_CH_AV))
336 break;
337 }
338
339 tty_flip_buffer_push(tty);
340 }
341
342 static void ip22zilog_status_handle(struct uart_ip22zilog_port *up,
343 struct zilog_channel *channel,
344 struct pt_regs *regs)
345 {
346 unsigned char status;
347
348 status = readb(&channel->control);
349 ZSDELAY();
350
351 writeb(RES_EXT_INT, &channel->control);
352 ZSDELAY();
353 ZS_WSYNC(channel);
354
355 if (ZS_WANTS_MODEM_STATUS(up)) {
356 if (status & SYNC)
357 up->port.icount.dsr++;
358
359 /* The Zilog just gives us an interrupt when DCD/CTS/etc. change.
360 * But it does not tell us which bit has changed, we have to keep
361 * track of this ourselves.
362 */
363 if ((status & DCD) ^ up->prev_status)
364 uart_handle_dcd_change(&up->port,
365 (status & DCD));
366 if ((status & CTS) ^ up->prev_status)
367 uart_handle_cts_change(&up->port,
368 (status & CTS));
369
370 wake_up_interruptible(&up->port.info->delta_msr_wait);
371 }
372
373 up->prev_status = status;
374 }
375
376 static void ip22zilog_transmit_chars(struct uart_ip22zilog_port *up,
377 struct zilog_channel *channel)
378 {
379 struct circ_buf *xmit;
380
381 if (ZS_IS_CONS(up)) {
382 unsigned char status = readb(&channel->control);
383 ZSDELAY();
384
385 /* TX still busy? Just wait for the next TX done interrupt.
386 *
387 * It can occur because of how we do serial console writes. It would
388 * be nice to transmit console writes just like we normally would for
389 * a TTY line. (ie. buffered and TX interrupt driven). That is not
390 * easy because console writes cannot sleep. One solution might be
391 * to poll on enough port->xmit space becomming free. -DaveM
392 */
393 if (!(status & Tx_BUF_EMP))
394 return;
395 }
396
397 up->flags &= ~IP22ZILOG_FLAG_TX_ACTIVE;
398
399 if (ZS_REGS_HELD(up)) {
400 __load_zsregs(channel, up->curregs);
401 up->flags &= ~IP22ZILOG_FLAG_REGS_HELD;
402 }
403
404 if (ZS_TX_STOPPED(up)) {
405 up->flags &= ~IP22ZILOG_FLAG_TX_STOPPED;
406 goto ack_tx_int;
407 }
408
409 if (up->port.x_char) {
410 up->flags |= IP22ZILOG_FLAG_TX_ACTIVE;
411 writeb(up->port.x_char, &channel->data);
412 ZSDELAY();
413 ZS_WSYNC(channel);
414
415 up->port.icount.tx++;
416 up->port.x_char = 0;
417 return;
418 }
419
420 if (up->port.info == NULL)
421 goto ack_tx_int;
422 xmit = &up->port.info->xmit;
423 if (uart_circ_empty(xmit))
424 goto ack_tx_int;
425 if (uart_tx_stopped(&up->port))
426 goto ack_tx_int;
427
428 up->flags |= IP22ZILOG_FLAG_TX_ACTIVE;
429 writeb(xmit->buf[xmit->tail], &channel->data);
430 ZSDELAY();
431 ZS_WSYNC(channel);
432
433 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
434 up->port.icount.tx++;
435
436 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
437 uart_write_wakeup(&up->port);
438
439 return;
440
441 ack_tx_int:
442 writeb(RES_Tx_P, &channel->control);
443 ZSDELAY();
444 ZS_WSYNC(channel);
445 }
446
447 static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id, struct pt_regs *regs)
448 {
449 struct uart_ip22zilog_port *up = dev_id;
450
451 while (up) {
452 struct zilog_channel *channel
453 = ZILOG_CHANNEL_FROM_PORT(&up->port);
454 unsigned char r3;
455
456 spin_lock(&up->port.lock);
457 r3 = read_zsreg(channel, R3);
458
459 /* Channel A */
460 if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
461 writeb(RES_H_IUS, &channel->control);
462 ZSDELAY();
463 ZS_WSYNC(channel);
464
465 if (r3 & CHARxIP)
466 ip22zilog_receive_chars(up, channel, regs);
467 if (r3 & CHAEXT)
468 ip22zilog_status_handle(up, channel, regs);
469 if (r3 & CHATxIP)
470 ip22zilog_transmit_chars(up, channel);
471 }
472 spin_unlock(&up->port.lock);
473
474 /* Channel B */
475 up = up->next;
476 channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
477
478 spin_lock(&up->port.lock);
479 if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
480 writeb(RES_H_IUS, &channel->control);
481 ZSDELAY();
482 ZS_WSYNC(channel);
483
484 if (r3 & CHBRxIP)
485 ip22zilog_receive_chars(up, channel, regs);
486 if (r3 & CHBEXT)
487 ip22zilog_status_handle(up, channel, regs);
488 if (r3 & CHBTxIP)
489 ip22zilog_transmit_chars(up, channel);
490 }
491 spin_unlock(&up->port.lock);
492
493 up = up->next;
494 }
495
496 return IRQ_HANDLED;
497 }
498
499 /* A convenient way to quickly get R0 status. The caller must _not_ hold the
500 * port lock, it is acquired here.
501 */
502 static __inline__ unsigned char ip22zilog_read_channel_status(struct uart_port *port)
503 {
504 struct zilog_channel *channel;
505 unsigned char status;
506
507 channel = ZILOG_CHANNEL_FROM_PORT(port);
508 status = readb(&channel->control);
509 ZSDELAY();
510
511 return status;
512 }
513
514 /* The port lock is not held. */
515 static unsigned int ip22zilog_tx_empty(struct uart_port *port)
516 {
517 unsigned long flags;
518 unsigned char status;
519 unsigned int ret;
520
521 spin_lock_irqsave(&port->lock, flags);
522
523 status = ip22zilog_read_channel_status(port);
524
525 spin_unlock_irqrestore(&port->lock, flags);
526
527 if (status & Tx_BUF_EMP)
528 ret = TIOCSER_TEMT;
529 else
530 ret = 0;
531
532 return ret;
533 }
534
535 /* The port lock is held and interrupts are disabled. */
536 static unsigned int ip22zilog_get_mctrl(struct uart_port *port)
537 {
538 unsigned char status;
539 unsigned int ret;
540
541 status = ip22zilog_read_channel_status(port);
542
543 ret = 0;
544 if (status & DCD)
545 ret |= TIOCM_CAR;
546 if (status & SYNC)
547 ret |= TIOCM_DSR;
548 if (status & CTS)
549 ret |= TIOCM_CTS;
550
551 return ret;
552 }
553
554 /* The port lock is held and interrupts are disabled. */
555 static void ip22zilog_set_mctrl(struct uart_port *port, unsigned int mctrl)
556 {
557 struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port;
558 struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port);
559 unsigned char set_bits, clear_bits;
560
561 set_bits = clear_bits = 0;
562
563 if (mctrl & TIOCM_RTS)
564 set_bits |= RTS;
565 else
566 clear_bits |= RTS;
567 if (mctrl & TIOCM_DTR)
568 set_bits |= DTR;
569 else
570 clear_bits |= DTR;
571
572 /* NOTE: Not subject to 'transmitter active' rule. */
573 up->curregs[R5] |= set_bits;
574 up->curregs[R5] &= ~clear_bits;
575 write_zsreg(channel, R5, up->curregs[R5]);
576 }
577
578 /* The port lock is held and interrupts are disabled. */
579 static void ip22zilog_stop_tx(struct uart_port *port)
580 {
581 struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port;
582
583 up->flags |= IP22ZILOG_FLAG_TX_STOPPED;
584 }
585
586 /* The port lock is held and interrupts are disabled. */
587 static void ip22zilog_start_tx(struct uart_port *port)
588 {
589 struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port;
590 struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port);
591 unsigned char status;
592
593 up->flags |= IP22ZILOG_FLAG_TX_ACTIVE;
594 up->flags &= ~IP22ZILOG_FLAG_TX_STOPPED;
595
596 status = readb(&channel->control);
597 ZSDELAY();
598
599 /* TX busy? Just wait for the TX done interrupt. */
600 if (!(status & Tx_BUF_EMP))
601 return;
602
603 /* Send the first character to jump-start the TX done
604 * IRQ sending engine.
605 */
606 if (port->x_char) {
607 writeb(port->x_char, &channel->data);
608 ZSDELAY();
609 ZS_WSYNC(channel);
610
611 port->icount.tx++;
612 port->x_char = 0;
613 } else {
614 struct circ_buf *xmit = &port->info->xmit;
615
616 writeb(xmit->buf[xmit->tail], &channel->data);
617 ZSDELAY();
618 ZS_WSYNC(channel);
619
620 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
621 port->icount.tx++;
622
623 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
624 uart_write_wakeup(&up->port);
625 }
626 }
627
628 /* The port lock is held and interrupts are disabled. */
629 static void ip22zilog_stop_rx(struct uart_port *port)
630 {
631 struct uart_ip22zilog_port *up = UART_ZILOG(port);
632 struct zilog_channel *channel;
633
634 if (ZS_IS_CONS(up))
635 return;
636
637 channel = ZILOG_CHANNEL_FROM_PORT(port);
638
639 /* Disable all RX interrupts. */
640 up->curregs[R1] &= ~RxINT_MASK;
641 ip22zilog_maybe_update_regs(up, channel);
642 }
643
644 /* The port lock is held. */
645 static void ip22zilog_enable_ms(struct uart_port *port)
646 {
647 struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port;
648 struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port);
649 unsigned char new_reg;
650
651 new_reg = up->curregs[R15] | (DCDIE | SYNCIE | CTSIE);
652 if (new_reg != up->curregs[R15]) {
653 up->curregs[R15] = new_reg;
654
655 /* NOTE: Not subject to 'transmitter active' rule. */
656 write_zsreg(channel, R15, up->curregs[R15]);
657 }
658 }
659
660 /* The port lock is not held. */
661 static void ip22zilog_break_ctl(struct uart_port *port, int break_state)
662 {
663 struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port;
664 struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port);
665 unsigned char set_bits, clear_bits, new_reg;
666 unsigned long flags;
667
668 set_bits = clear_bits = 0;
669
670 if (break_state)
671 set_bits |= SND_BRK;
672 else
673 clear_bits |= SND_BRK;
674
675 spin_lock_irqsave(&port->lock, flags);
676
677 new_reg = (up->curregs[R5] | set_bits) & ~clear_bits;
678 if (new_reg != up->curregs[R5]) {
679 up->curregs[R5] = new_reg;
680
681 /* NOTE: Not subject to 'transmitter active' rule. */
682 write_zsreg(channel, R5, up->curregs[R5]);
683 }
684
685 spin_unlock_irqrestore(&port->lock, flags);
686 }
687
688 static void __ip22zilog_startup(struct uart_ip22zilog_port *up)
689 {
690 struct zilog_channel *channel;
691
692 channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
693 up->prev_status = readb(&channel->control);
694
695 /* Enable receiver and transmitter. */
696 up->curregs[R3] |= RxENAB;
697 up->curregs[R5] |= TxENAB;
698
699 up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
700 ip22zilog_maybe_update_regs(up, channel);
701 }
702
703 static int ip22zilog_startup(struct uart_port *port)
704 {
705 struct uart_ip22zilog_port *up = UART_ZILOG(port);
706 unsigned long flags;
707
708 if (ZS_IS_CONS(up))
709 return 0;
710
711 spin_lock_irqsave(&port->lock, flags);
712 __ip22zilog_startup(up);
713 spin_unlock_irqrestore(&port->lock, flags);
714 return 0;
715 }
716
717 /*
718 * The test for ZS_IS_CONS is explained by the following e-mail:
719 *****
720 * From: Russell King <rmk@arm.linux.org.uk>
721 * Date: Sun, 8 Dec 2002 10:18:38 +0000
722 *
723 * On Sun, Dec 08, 2002 at 02:43:36AM -0500, Pete Zaitcev wrote:
724 * > I boot my 2.5 boxes using "console=ttyS0,9600" argument,
725 * > and I noticed that something is not right with reference
726 * > counting in this case. It seems that when the console
727 * > is open by kernel initially, this is not accounted
728 * > as an open, and uart_startup is not called.
729 *
730 * That is correct. We are unable to call uart_startup when the serial
731 * console is initialised because it may need to allocate memory (as
732 * request_irq does) and the memory allocators may not have been
733 * initialised.
734 *
735 * 1. initialise the port into a state where it can send characters in the
736 * console write method.
737 *
738 * 2. don't do the actual hardware shutdown in your shutdown() method (but
739 * do the normal software shutdown - ie, free irqs etc)
740 *****
741 */
742 static void ip22zilog_shutdown(struct uart_port *port)
743 {
744 struct uart_ip22zilog_port *up = UART_ZILOG(port);
745 struct zilog_channel *channel;
746 unsigned long flags;
747
748 if (ZS_IS_CONS(up))
749 return;
750
751 spin_lock_irqsave(&port->lock, flags);
752
753 channel = ZILOG_CHANNEL_FROM_PORT(port);
754
755 /* Disable receiver and transmitter. */
756 up->curregs[R3] &= ~RxENAB;
757 up->curregs[R5] &= ~TxENAB;
758
759 /* Disable all interrupts and BRK assertion. */
760 up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
761 up->curregs[R5] &= ~SND_BRK;
762 ip22zilog_maybe_update_regs(up, channel);
763
764 spin_unlock_irqrestore(&port->lock, flags);
765 }
766
767 /* Shared by TTY driver and serial console setup. The port lock is held
768 * and local interrupts are disabled.
769 */
770 static void
771 ip22zilog_convert_to_zs(struct uart_ip22zilog_port *up, unsigned int cflag,
772 unsigned int iflag, int brg)
773 {
774
775 up->curregs[R10] = NRZ;
776 up->curregs[R11] = TCBR | RCBR;
777
778 /* Program BAUD and clock source. */
779 up->curregs[R4] &= ~XCLK_MASK;
780 up->curregs[R4] |= X16CLK;
781 up->curregs[R12] = brg & 0xff;
782 up->curregs[R13] = (brg >> 8) & 0xff;
783 up->curregs[R14] = BRENAB;
784
785 /* Character size, stop bits, and parity. */
786 up->curregs[3] &= ~RxN_MASK;
787 up->curregs[5] &= ~TxN_MASK;
788 switch (cflag & CSIZE) {
789 case CS5:
790 up->curregs[3] |= Rx5;
791 up->curregs[5] |= Tx5;
792 up->parity_mask = 0x1f;
793 break;
794 case CS6:
795 up->curregs[3] |= Rx6;
796 up->curregs[5] |= Tx6;
797 up->parity_mask = 0x3f;
798 break;
799 case CS7:
800 up->curregs[3] |= Rx7;
801 up->curregs[5] |= Tx7;
802 up->parity_mask = 0x7f;
803 break;
804 case CS8:
805 default:
806 up->curregs[3] |= Rx8;
807 up->curregs[5] |= Tx8;
808 up->parity_mask = 0xff;
809 break;
810 };
811 up->curregs[4] &= ~0x0c;
812 if (cflag & CSTOPB)
813 up->curregs[4] |= SB2;
814 else
815 up->curregs[4] |= SB1;
816 if (cflag & PARENB)
817 up->curregs[4] |= PAR_ENAB;
818 else
819 up->curregs[4] &= ~PAR_ENAB;
820 if (!(cflag & PARODD))
821 up->curregs[4] |= PAR_EVEN;
822 else
823 up->curregs[4] &= ~PAR_EVEN;
824
825 up->port.read_status_mask = Rx_OVR;
826 if (iflag & INPCK)
827 up->port.read_status_mask |= CRC_ERR | PAR_ERR;
828 if (iflag & (BRKINT | PARMRK))
829 up->port.read_status_mask |= BRK_ABRT;
830
831 up->port.ignore_status_mask = 0;
832 if (iflag & IGNPAR)
833 up->port.ignore_status_mask |= CRC_ERR | PAR_ERR;
834 if (iflag & IGNBRK) {
835 up->port.ignore_status_mask |= BRK_ABRT;
836 if (iflag & IGNPAR)
837 up->port.ignore_status_mask |= Rx_OVR;
838 }
839
840 if ((cflag & CREAD) == 0)
841 up->port.ignore_status_mask = 0xff;
842 }
843
844 /* The port lock is not held. */
845 static void
846 ip22zilog_set_termios(struct uart_port *port, struct termios *termios,
847 struct termios *old)
848 {
849 struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port;
850 unsigned long flags;
851 int baud, brg;
852
853 baud = uart_get_baud_rate(port, termios, old, 1200, 76800);
854
855 spin_lock_irqsave(&up->port.lock, flags);
856
857 brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
858
859 ip22zilog_convert_to_zs(up, termios->c_cflag, termios->c_iflag, brg);
860
861 if (UART_ENABLE_MS(&up->port, termios->c_cflag))
862 up->flags |= IP22ZILOG_FLAG_MODEM_STATUS;
863 else
864 up->flags &= ~IP22ZILOG_FLAG_MODEM_STATUS;
865
866 up->cflag = termios->c_cflag;
867
868 ip22zilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port));
869
870 spin_unlock_irqrestore(&up->port.lock, flags);
871 }
872
873 static const char *ip22zilog_type(struct uart_port *port)
874 {
875 return "IP22-Zilog";
876 }
877
878 /* We do not request/release mappings of the registers here, this
879 * happens at early serial probe time.
880 */
881 static void ip22zilog_release_port(struct uart_port *port)
882 {
883 }
884
885 static int ip22zilog_request_port(struct uart_port *port)
886 {
887 return 0;
888 }
889
890 /* These do not need to do anything interesting either. */
891 static void ip22zilog_config_port(struct uart_port *port, int flags)
892 {
893 }
894
895 /* We do not support letting the user mess with the divisor, IRQ, etc. */
896 static int ip22zilog_verify_port(struct uart_port *port, struct serial_struct *ser)
897 {
898 return -EINVAL;
899 }
900
901 static struct uart_ops ip22zilog_pops = {
902 .tx_empty = ip22zilog_tx_empty,
903 .set_mctrl = ip22zilog_set_mctrl,
904 .get_mctrl = ip22zilog_get_mctrl,
905 .stop_tx = ip22zilog_stop_tx,
906 .start_tx = ip22zilog_start_tx,
907 .stop_rx = ip22zilog_stop_rx,
908 .enable_ms = ip22zilog_enable_ms,
909 .break_ctl = ip22zilog_break_ctl,
910 .startup = ip22zilog_startup,
911 .shutdown = ip22zilog_shutdown,
912 .set_termios = ip22zilog_set_termios,
913 .type = ip22zilog_type,
914 .release_port = ip22zilog_release_port,
915 .request_port = ip22zilog_request_port,
916 .config_port = ip22zilog_config_port,
917 .verify_port = ip22zilog_verify_port,
918 };
919
920 static struct uart_ip22zilog_port *ip22zilog_port_table;
921 static struct zilog_layout **ip22zilog_chip_regs;
922
923 static struct uart_ip22zilog_port *ip22zilog_irq_chain;
924 static int zilog_irq = -1;
925
926 static void * __init alloc_one_table(unsigned long size)
927 {
928 void *ret;
929
930 ret = kmalloc(size, GFP_KERNEL);
931 if (ret != NULL)
932 memset(ret, 0, size);
933
934 return ret;
935 }
936
937 static void __init ip22zilog_alloc_tables(void)
938 {
939 ip22zilog_port_table = (struct uart_ip22zilog_port *)
940 alloc_one_table(NUM_CHANNELS * sizeof(struct uart_ip22zilog_port));
941 ip22zilog_chip_regs = (struct zilog_layout **)
942 alloc_one_table(NUM_IP22ZILOG * sizeof(struct zilog_layout *));
943
944 if (ip22zilog_port_table == NULL || ip22zilog_chip_regs == NULL) {
945 panic("IP22-Zilog: Cannot allocate IP22-Zilog tables.");
946 }
947 }
948
949 /* Get the address of the registers for IP22-Zilog instance CHIP. */
950 static struct zilog_layout * __init get_zs(int chip)
951 {
952 unsigned long base;
953
954 if (chip < 0 || chip >= NUM_IP22ZILOG) {
955 panic("IP22-Zilog: Illegal chip number %d in get_zs.", chip);
956 }
957
958 /* Not probe-able, hard code it. */
959 base = (unsigned long) &sgioc->uart;
960
961 zilog_irq = SGI_SERIAL_IRQ;
962 request_mem_region(base, 8, "IP22-Zilog");
963
964 return (struct zilog_layout *) base;
965 }
966
967 #define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */
968
969 #ifdef CONFIG_SERIAL_IP22_ZILOG_CONSOLE
970 static void ip22zilog_put_char(struct uart_port *port, int ch)
971 {
972 struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port);
973 int loops = ZS_PUT_CHAR_MAX_DELAY;
974
975 /* This is a timed polling loop so do not switch the explicit
976 * udelay with ZSDELAY as that is a NOP on some platforms. -DaveM
977 */
978 do {
979 unsigned char val = readb(&channel->control);
980 if (val & Tx_BUF_EMP) {
981 ZSDELAY();
982 break;
983 }
984 udelay(5);
985 } while (--loops);
986
987 writeb(ch, &channel->data);
988 ZSDELAY();
989 ZS_WSYNC(channel);
990 }
991
992 static void
993 ip22zilog_console_write(struct console *con, const char *s, unsigned int count)
994 {
995 struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index];
996 unsigned long flags;
997
998 spin_lock_irqsave(&up->port.lock, flags);
999 uart_console_write(&up->port, s, count, ip22zilog_put_char);
1000 udelay(2);
1001 spin_unlock_irqrestore(&up->port.lock, flags);
1002 }
1003
1004 void
1005 ip22serial_console_termios(struct console *con, char *options)
1006 {
1007 int baud = 9600, bits = 8, cflag;
1008 int parity = 'n';
1009 int flow = 'n';
1010
1011 if (options)
1012 uart_parse_options(options, &baud, &parity, &bits, &flow);
1013
1014 cflag = CREAD | HUPCL | CLOCAL;
1015
1016 switch (baud) {
1017 case 150: cflag |= B150; break;
1018 case 300: cflag |= B300; break;
1019 case 600: cflag |= B600; break;
1020 case 1200: cflag |= B1200; break;
1021 case 2400: cflag |= B2400; break;
1022 case 4800: cflag |= B4800; break;
1023 case 9600: cflag |= B9600; break;
1024 case 19200: cflag |= B19200; break;
1025 case 38400: cflag |= B38400; break;
1026 default: baud = 9600; cflag |= B9600; break;
1027 }
1028
1029 con->cflag = cflag | CS8; /* 8N1 */
1030 }
1031
1032 static int __init ip22zilog_console_setup(struct console *con, char *options)
1033 {
1034 struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index];
1035 unsigned long flags;
1036 int baud, brg;
1037
1038 printk("Console: ttyS%d (IP22-Zilog)\n", con->index);
1039
1040 /* Get firmware console settings. */
1041 ip22serial_console_termios(con, options);
1042
1043 /* Firmware console speed is limited to 150-->38400 baud so
1044 * this hackish cflag thing is OK.
1045 */
1046 switch (con->cflag & CBAUD) {
1047 case B150: baud = 150; break;
1048 case B300: baud = 300; break;
1049 case B600: baud = 600; break;
1050 case B1200: baud = 1200; break;
1051 case B2400: baud = 2400; break;
1052 case B4800: baud = 4800; break;
1053 default: case B9600: baud = 9600; break;
1054 case B19200: baud = 19200; break;
1055 case B38400: baud = 38400; break;
1056 };
1057
1058 brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
1059
1060 spin_lock_irqsave(&up->port.lock, flags);
1061
1062 up->curregs[R15] = BRKIE;
1063 ip22zilog_convert_to_zs(up, con->cflag, 0, brg);
1064
1065 __ip22zilog_startup(up);
1066
1067 spin_unlock_irqrestore(&up->port.lock, flags);
1068
1069 return 0;
1070 }
1071
1072 static struct uart_driver ip22zilog_reg;
1073
1074 static struct console ip22zilog_console = {
1075 .name = "ttyS",
1076 .write = ip22zilog_console_write,
1077 .device = uart_console_device,
1078 .setup = ip22zilog_console_setup,
1079 .flags = CON_PRINTBUFFER,
1080 .index = -1,
1081 .data = &ip22zilog_reg,
1082 };
1083 #endif /* CONFIG_SERIAL_IP22_ZILOG_CONSOLE */
1084
1085 static struct uart_driver ip22zilog_reg = {
1086 .owner = THIS_MODULE,
1087 .driver_name = "serial",
1088 .devfs_name = "tts/",
1089 .dev_name = "ttyS",
1090 .major = TTY_MAJOR,
1091 .minor = 64,
1092 .nr = NUM_CHANNELS,
1093 #ifdef CONFIG_SERIAL_IP22_ZILOG_CONSOLE
1094 .cons = &ip22zilog_console,
1095 #endif
1096 };
1097
1098 static void __init ip22zilog_prepare(void)
1099 {
1100 struct uart_ip22zilog_port *up;
1101 struct zilog_layout *rp;
1102 int channel, chip;
1103
1104 /*
1105 * Temporary fix.
1106 */
1107 for (channel = 0; channel < NUM_CHANNELS; channel++)
1108 spin_lock_init(&ip22zilog_port_table[channel].port.lock);
1109
1110 ip22zilog_irq_chain = &ip22zilog_port_table[NUM_CHANNELS - 1];
1111 up = &ip22zilog_port_table[0];
1112 for (channel = NUM_CHANNELS - 1 ; channel > 0; channel--)
1113 up[channel].next = &up[channel - 1];
1114 up[channel].next = NULL;
1115
1116 for (chip = 0; chip < NUM_IP22ZILOG; chip++) {
1117 if (!ip22zilog_chip_regs[chip]) {
1118 ip22zilog_chip_regs[chip] = rp = get_zs(chip);
1119
1120 up[(chip * 2) + 0].port.membase = (char *) &rp->channelB;
1121 up[(chip * 2) + 1].port.membase = (char *) &rp->channelA;
1122
1123 /* In theory mapbase is the physical address ... */
1124 up[(chip * 2) + 0].port.mapbase =
1125 (unsigned long) ioremap((unsigned long) &rp->channelB, 8);
1126 up[(chip * 2) + 1].port.mapbase =
1127 (unsigned long) ioremap((unsigned long) &rp->channelA, 8);
1128 }
1129
1130 /* Channel A */
1131 up[(chip * 2) + 0].port.iotype = UPIO_MEM;
1132 up[(chip * 2) + 0].port.irq = zilog_irq;
1133 up[(chip * 2) + 0].port.uartclk = ZS_CLOCK;
1134 up[(chip * 2) + 0].port.fifosize = 1;
1135 up[(chip * 2) + 0].port.ops = &ip22zilog_pops;
1136 up[(chip * 2) + 0].port.type = PORT_IP22ZILOG;
1137 up[(chip * 2) + 0].port.flags = 0;
1138 up[(chip * 2) + 0].port.line = (chip * 2) + 0;
1139 up[(chip * 2) + 0].flags = 0;
1140
1141 /* Channel B */
1142 up[(chip * 2) + 1].port.iotype = UPIO_MEM;
1143 up[(chip * 2) + 1].port.irq = zilog_irq;
1144 up[(chip * 2) + 1].port.uartclk = ZS_CLOCK;
1145 up[(chip * 2) + 1].port.fifosize = 1;
1146 up[(chip * 2) + 1].port.ops = &ip22zilog_pops;
1147 up[(chip * 2) + 1].port.type = PORT_IP22ZILOG;
1148 up[(chip * 2) + 1].port.flags |= IP22ZILOG_FLAG_IS_CHANNEL_A;
1149 up[(chip * 2) + 1].port.line = (chip * 2) + 1;
1150 up[(chip * 2) + 1].flags = 0;
1151 }
1152 }
1153
1154 static void __init ip22zilog_init_hw(void)
1155 {
1156 int i;
1157
1158 for (i = 0; i < NUM_CHANNELS; i++) {
1159 struct uart_ip22zilog_port *up = &ip22zilog_port_table[i];
1160 struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
1161 unsigned long flags;
1162 int baud, brg;
1163
1164 spin_lock_irqsave(&up->port.lock, flags);
1165
1166 if (ZS_IS_CHANNEL_A(up)) {
1167 write_zsreg(channel, R9, FHWRES);
1168 ZSDELAY_LONG();
1169 (void) read_zsreg(channel, R0);
1170 }
1171
1172 /* Normal serial TTY. */
1173 up->parity_mask = 0xff;
1174 up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
1175 up->curregs[R4] = PAR_EVEN | X16CLK | SB1;
1176 up->curregs[R3] = RxENAB | Rx8;
1177 up->curregs[R5] = TxENAB | Tx8;
1178 up->curregs[R9] = NV | MIE;
1179 up->curregs[R10] = NRZ;
1180 up->curregs[R11] = TCBR | RCBR;
1181 baud = 9600;
1182 brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
1183 up->curregs[R12] = (brg & 0xff);
1184 up->curregs[R13] = (brg >> 8) & 0xff;
1185 up->curregs[R14] = BRENAB;
1186 __load_zsregs(channel, up->curregs);
1187 /* set master interrupt enable */
1188 write_zsreg(channel, R9, up->curregs[R9]);
1189
1190 spin_unlock_irqrestore(&up->port.lock, flags);
1191 }
1192 }
1193
1194 static int __init ip22zilog_ports_init(void)
1195 {
1196 int ret;
1197
1198 printk(KERN_INFO "Serial: IP22 Zilog driver (%d chips).\n", NUM_IP22ZILOG);
1199
1200 ip22zilog_prepare();
1201
1202 if (request_irq(zilog_irq, ip22zilog_interrupt, 0,
1203 "IP22-Zilog", ip22zilog_irq_chain)) {
1204 panic("IP22-Zilog: Unable to register zs interrupt handler.\n");
1205 }
1206
1207 ip22zilog_init_hw();
1208
1209 ret = uart_register_driver(&ip22zilog_reg);
1210 if (ret == 0) {
1211 int i;
1212
1213 for (i = 0; i < NUM_CHANNELS; i++) {
1214 struct uart_ip22zilog_port *up = &ip22zilog_port_table[i];
1215
1216 uart_add_one_port(&ip22zilog_reg, &up->port);
1217 }
1218 }
1219
1220 return ret;
1221 }
1222
1223 static int __init ip22zilog_init(void)
1224 {
1225 /* IP22 Zilog setup is hard coded, no probing to do. */
1226 ip22zilog_alloc_tables();
1227 ip22zilog_ports_init();
1228
1229 return 0;
1230 }
1231
1232 static void __exit ip22zilog_exit(void)
1233 {
1234 int i;
1235
1236 for (i = 0; i < NUM_CHANNELS; i++) {
1237 struct uart_ip22zilog_port *up = &ip22zilog_port_table[i];
1238
1239 uart_remove_one_port(&ip22zilog_reg, &up->port);
1240 }
1241
1242 uart_unregister_driver(&ip22zilog_reg);
1243 }
1244
1245 module_init(ip22zilog_init);
1246 module_exit(ip22zilog_exit);
1247
1248 /* David wrote it but I'm to blame for the bugs ... */
1249 MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
1250 MODULE_DESCRIPTION("SGI Zilog serial port driver");
1251 MODULE_LICENSE("GPL");
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree