USB: gadget: fix EEM gadget CRC usage
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / mn10300 / mm / fault.c
blob53bb17d0f0687764ab1d8a4e05d6cdfc81c03e25
1 /* MN10300 MMU Fault handler
3 * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
4 * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
5 * Modified by David Howells (dhowells@redhat.com)
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public Licence
9 * as published by the Free Software Foundation; either version
10 * 2 of the Licence, or (at your option) any later version.
13 #include <linux/signal.h>
14 #include <linux/sched.h>
15 #include <linux/kernel.h>
16 #include <linux/errno.h>
17 #include <linux/string.h>
18 #include <linux/types.h>
19 #include <linux/ptrace.h>
20 #include <linux/mman.h>
21 #include <linux/mm.h>
22 #include <linux/smp.h>
23 #include <linux/interrupt.h>
24 #include <linux/init.h>
25 #include <linux/vt_kern.h> /* For unblank_screen() */
27 #include <asm/system.h>
28 #include <asm/uaccess.h>
29 #include <asm/pgalloc.h>
30 #include <asm/hardirq.h>
31 #include <asm/gdb-stub.h>
32 #include <asm/cpu-regs.h>
35 * Unlock any spinlocks which will prevent us from getting the
36 * message out
38 void bust_spinlocks(int yes)
40 if (yes) {
41 oops_in_progress = 1;
42 #ifdef CONFIG_SMP
43 /* Many serial drivers do __global_cli() */
44 global_irq_lock = 0;
45 #endif
46 } else {
47 int loglevel_save = console_loglevel;
48 #ifdef CONFIG_VT
49 unblank_screen();
50 #endif
51 oops_in_progress = 0;
53 * OK, the message is on the console. Now we call printk()
54 * without oops_in_progress set so that printk will give klogd
55 * a poke. Hold onto your hats...
57 console_loglevel = 15; /* NMI oopser may have shut the console
58 * up */
59 printk(" ");
60 console_loglevel = loglevel_save;
64 void do_BUG(const char *file, int line)
66 bust_spinlocks(1);
67 printk(KERN_EMERG "------------[ cut here ]------------\n");
68 printk(KERN_EMERG "kernel BUG at %s:%d!\n", file, line);
71 #if 0
72 static void print_pagetable_entries(pgd_t *pgdir, unsigned long address)
74 pgd_t *pgd;
75 pmd_t *pmd;
76 pte_t *pte;
78 pgd = pgdir + __pgd_offset(address);
79 printk(KERN_DEBUG "pgd entry %p: %016Lx\n",
80 pgd, (long long) pgd_val(*pgd));
82 if (!pgd_present(*pgd)) {
83 printk(KERN_DEBUG "... pgd not present!\n");
84 return;
86 pmd = pmd_offset(pgd, address);
87 printk(KERN_DEBUG "pmd entry %p: %016Lx\n",
88 pmd, (long long)pmd_val(*pmd));
90 if (!pmd_present(*pmd)) {
91 printk(KERN_DEBUG "... pmd not present!\n");
92 return;
94 pte = pte_offset(pmd, address);
95 printk(KERN_DEBUG "pte entry %p: %016Lx\n",
96 pte, (long long) pte_val(*pte));
98 if (!pte_present(*pte))
99 printk(KERN_DEBUG "... pte not present!\n");
101 #endif
103 asmlinkage void monitor_signal(struct pt_regs *);
106 * This routine handles page faults. It determines the address,
107 * and the problem, and then passes it off to one of the appropriate
108 * routines.
110 * fault_code:
111 * - LSW: either MMUFCR_IFC or MMUFCR_DFC as appropriate
112 * - MSW: 0 if data access, 1 if instruction access
113 * - bit 0: TLB miss flag
114 * - bit 1: initial write
115 * - bit 2: page invalid
116 * - bit 3: protection violation
117 * - bit 4: accessor (0=user 1=kernel)
118 * - bit 5: 0=read 1=write
119 * - bit 6-8: page protection spec
120 * - bit 9: illegal address
121 * - bit 16: 0=data 1=ins
124 asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long fault_code,
125 unsigned long address)
127 struct vm_area_struct *vma;
128 struct task_struct *tsk;
129 struct mm_struct *mm;
130 unsigned long page;
131 siginfo_t info;
132 int write, fault;
134 #ifdef CONFIG_GDBSTUB
135 /* handle GDB stub causing a fault */
136 if (gdbstub_busy) {
137 gdbstub_exception(regs, TBR & TBR_INT_CODE);
138 return;
140 #endif
142 #if 0
143 printk(KERN_DEBUG "--- do_page_fault(%p,%s:%04lx,%08lx)\n",
144 regs,
145 fault_code & 0x10000 ? "ins" : "data",
146 fault_code & 0xffff, address);
147 #endif
149 tsk = current;
152 * We fault-in kernel-space virtual memory on-demand. The
153 * 'reference' page table is init_mm.pgd.
155 * NOTE! We MUST NOT take any locks for this case. We may
156 * be in an interrupt or a critical region, and should
157 * only copy the information from the master page table,
158 * nothing more.
160 * This verifies that the fault happens in kernel space
161 * and that the fault was a page not present (invalid) error
163 if (address >= VMALLOC_START && address < VMALLOC_END &&
164 (fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR &&
165 (fault_code & MMUFCR_xFC_PGINVAL) == MMUFCR_xFC_PGINVAL
167 goto vmalloc_fault;
169 mm = tsk->mm;
170 info.si_code = SEGV_MAPERR;
173 * If we're in an interrupt or have no user
174 * context, we must not take the fault..
176 if (in_atomic() || !mm)
177 goto no_context;
179 down_read(&mm->mmap_sem);
181 vma = find_vma(mm, address);
182 if (!vma)
183 goto bad_area;
184 if (vma->vm_start <= address)
185 goto good_area;
186 if (!(vma->vm_flags & VM_GROWSDOWN))
187 goto bad_area;
189 if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) {
190 /* accessing the stack below the stack pointer is always a
191 * bug */
192 if ((address & PAGE_MASK) + 2 * PAGE_SIZE < regs->sp) {
193 #if 0
194 printk(KERN_WARNING
195 "[%d] ### Access below stack @%lx (sp=%lx)\n",
196 current->pid, address, regs->sp);
197 printk(KERN_WARNING
198 "vma [%08x - %08x]\n",
199 vma->vm_start, vma->vm_end);
200 show_registers(regs);
201 printk(KERN_WARNING
202 "[%d] ### Code: [%08lx]"
203 " %02x %02x %02x %02x %02x %02x %02x %02x\n",
204 current->pid,
205 regs->pc,
206 ((u8 *) regs->pc)[0],
207 ((u8 *) regs->pc)[1],
208 ((u8 *) regs->pc)[2],
209 ((u8 *) regs->pc)[3],
210 ((u8 *) regs->pc)[4],
211 ((u8 *) regs->pc)[5],
212 ((u8 *) regs->pc)[6],
213 ((u8 *) regs->pc)[7]
215 #endif
216 goto bad_area;
220 if (expand_stack(vma, address))
221 goto bad_area;
224 * Ok, we have a good vm_area for this memory access, so
225 * we can handle it..
227 good_area:
228 info.si_code = SEGV_ACCERR;
229 write = 0;
230 switch (fault_code & (MMUFCR_xFC_PGINVAL|MMUFCR_xFC_TYPE)) {
231 default: /* 3: write, present */
232 case MMUFCR_xFC_TYPE_WRITE:
233 #ifdef TEST_VERIFY_AREA
234 if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR)
235 printk(KERN_DEBUG "WP fault at %08lx\n", regs->pc);
236 #endif
237 /* write to absent page */
238 case MMUFCR_xFC_PGINVAL | MMUFCR_xFC_TYPE_WRITE:
239 if (!(vma->vm_flags & VM_WRITE))
240 goto bad_area;
241 write++;
242 break;
244 /* read from protected page */
245 case MMUFCR_xFC_TYPE_READ:
246 goto bad_area;
248 /* read from absent page present */
249 case MMUFCR_xFC_PGINVAL | MMUFCR_xFC_TYPE_READ:
250 if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
251 goto bad_area;
252 break;
256 * If for any reason at all we couldn't handle the fault,
257 * make sure we exit gracefully rather than endlessly redo
258 * the fault.
260 fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
261 if (unlikely(fault & VM_FAULT_ERROR)) {
262 if (fault & VM_FAULT_OOM)
263 goto out_of_memory;
264 else if (fault & VM_FAULT_SIGBUS)
265 goto do_sigbus;
266 BUG();
268 if (fault & VM_FAULT_MAJOR)
269 current->maj_flt++;
270 else
271 current->min_flt++;
273 up_read(&mm->mmap_sem);
274 return;
277 * Something tried to access memory that isn't in our memory map..
278 * Fix it, but check if it's kernel or user first..
280 bad_area:
281 up_read(&mm->mmap_sem);
282 monitor_signal(regs);
284 /* User mode accesses just cause a SIGSEGV */
285 if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) {
286 info.si_signo = SIGSEGV;
287 info.si_errno = 0;
288 /* info.si_code has been set above */
289 info.si_addr = (void *)address;
290 force_sig_info(SIGSEGV, &info, tsk);
291 return;
294 no_context:
295 monitor_signal(regs);
296 /* Are we prepared to handle this kernel fault? */
297 if (fixup_exception(regs))
298 return;
301 * Oops. The kernel tried to access some bad page. We'll have to
302 * terminate things with extreme prejudice.
305 bust_spinlocks(1);
307 if (address < PAGE_SIZE)
308 printk(KERN_ALERT
309 "Unable to handle kernel NULL pointer dereference");
310 else
311 printk(KERN_ALERT
312 "Unable to handle kernel paging request");
313 printk(" at virtual address %08lx\n", address);
314 printk(" printing pc:\n");
315 printk(KERN_ALERT "%08lx\n", regs->pc);
317 #ifdef CONFIG_GDBSTUB
318 gdbstub_intercept(
319 regs, fault_code & 0x00010000 ? EXCEP_IAERROR : EXCEP_DAERROR);
320 #endif
322 page = PTBR;
323 page = ((unsigned long *) __va(page))[address >> 22];
324 printk(KERN_ALERT "*pde = %08lx\n", page);
325 if (page & 1) {
326 page &= PAGE_MASK;
327 address &= 0x003ff000;
328 page = ((unsigned long *) __va(page))[address >> PAGE_SHIFT];
329 printk(KERN_ALERT "*pte = %08lx\n", page);
332 die("Oops", regs, fault_code);
333 do_exit(SIGKILL);
336 * We ran out of memory, or some other thing happened to us that made
337 * us unable to handle the page fault gracefully.
339 out_of_memory:
340 up_read(&mm->mmap_sem);
341 monitor_signal(regs);
342 printk(KERN_ALERT "VM: killing process %s\n", tsk->comm);
343 if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR)
344 do_exit(SIGKILL);
345 goto no_context;
347 do_sigbus:
348 up_read(&mm->mmap_sem);
349 monitor_signal(regs);
352 * Send a sigbus, regardless of whether we were in kernel
353 * or user mode.
355 info.si_signo = SIGBUS;
356 info.si_errno = 0;
357 info.si_code = BUS_ADRERR;
358 info.si_addr = (void *)address;
359 force_sig_info(SIGBUS, &info, tsk);
361 /* Kernel mode? Handle exceptions or die */
362 if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR)
363 goto no_context;
364 return;
366 vmalloc_fault:
369 * Synchronize this task's top level page-table
370 * with the 'reference' page table.
372 * Do _not_ use "tsk" here. We might be inside
373 * an interrupt in the middle of a task switch..
375 int index = pgd_index(address);
376 pgd_t *pgd, *pgd_k;
377 pud_t *pud, *pud_k;
378 pmd_t *pmd, *pmd_k;
379 pte_t *pte_k;
381 pgd_k = init_mm.pgd + index;
383 if (!pgd_present(*pgd_k))
384 goto no_context;
386 pud_k = pud_offset(pgd_k, address);
387 if (!pud_present(*pud_k))
388 goto no_context;
390 pmd_k = pmd_offset(pud_k, address);
391 if (!pmd_present(*pmd_k))
392 goto no_context;
394 pgd = (pgd_t *) PTBR + index;
395 pud = pud_offset(pgd, address);
396 pmd = pmd_offset(pud, address);
397 set_pmd(pmd, *pmd_k);
399 pte_k = pte_offset_kernel(pmd_k, address);
400 if (!pte_present(*pte_k))
401 goto no_context;
402 return;