drivers/mfd/twl6040-core.c

   1 /*
   2  * MFD driver for TWL6040 audio device
   3  *
   4  * Authors:     Misael Lopez Cruz <misael.lopez@ti.com>
   5  *              Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
   6  *              Peter Ujfalusi <peter.ujfalusi@ti.com>
   7  *
   8  * Copyright:   (C) 2011 Texas Instruments, Inc.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  *
  14  * This program is distributed in the hope that it will be useful, but
  15  * WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  17  * General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  22  * 02110-1301 USA
  23  *
  24  */
  25
  26 #include <linux/module.h>
  27 #include <linux/types.h>
  28 #include <linux/slab.h>
  29 #include <linux/kernel.h>
  30 #include <linux/platform_device.h>
  31 #include <linux/gpio.h>
  32 #include <linux/delay.h>
  33 #include <linux/i2c/twl.h>
  34 #include <linux/mfd/core.h>
  35 #include <linux/mfd/twl6040.h>
  36
  37 #define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1)
  38
  39 int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
  40 {
  41         int ret;
  42         u8 val = 0;
  43
  44         mutex_lock(&twl6040->io_mutex);
  45         /* Vibra control registers from cache */
  46         if (unlikely(reg == TWL6040_REG_VIBCTLL ||
  47                      reg == TWL6040_REG_VIBCTLR)) {
  48                 val = twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)];
  49         } else {
  50                 ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg);
  51                 if (ret < 0) {
  52                         mutex_unlock(&twl6040->io_mutex);
  53                         return ret;
  54                 }
  55         }
  56         mutex_unlock(&twl6040->io_mutex);
  57
  58         return val;
  59 }
  60 EXPORT_SYMBOL(twl6040_reg_read);
  61
  62 int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val)
  63 {
  64         int ret;
  65
  66         mutex_lock(&twl6040->io_mutex);
  67         ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg);
  68         /* Cache the vibra control registers */
  69         if (reg == TWL6040_REG_VIBCTLL || reg == TWL6040_REG_VIBCTLR)
  70                 twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)] = val;
  71         mutex_unlock(&twl6040->io_mutex);
  72
  73         return ret;
  74 }
  75 EXPORT_SYMBOL(twl6040_reg_write);
  76
  77 int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
  78 {
  79         int ret;
  80         u8 val;
  81
  82         mutex_lock(&twl6040->io_mutex);
  83         ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg);
  84         if (ret)
  85                 goto out;
  86
  87         val |= mask;
  88         ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg);
  89 out:
  90         mutex_unlock(&twl6040->io_mutex);
  91         return ret;
  92 }
  93 EXPORT_SYMBOL(twl6040_set_bits);
  94
  95 int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
  96 {
  97         int ret;
  98         u8 val;
  99
 100         mutex_lock(&twl6040->io_mutex);
 101         ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg);
 102         if (ret)
 103                 goto out;
 104
 105         val &= ~mask;
 106         ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg);
 107 out:
 108         mutex_unlock(&twl6040->io_mutex);
 109         return ret;
 110 }
 111 EXPORT_SYMBOL(twl6040_clear_bits);
 112
 113 /* twl6040 codec manual power-up sequence */
 114 static int twl6040_power_up(struct twl6040 *twl6040)
 115 {
 116         u8 ldoctl, ncpctl, lppllctl;
 117         int ret;
 118
 119         /* enable high-side LDO, reference system and internal oscillator */
 120         ldoctl = TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA;
 121         ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 122         if (ret)
 123                 return ret;
 124         usleep_range(10000, 10500);
 125
 126         /* enable negative charge pump */
 127         ncpctl = TWL6040_NCPENA;
 128         ret = twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
 129         if (ret)
 130                 goto ncp_err;
 131         usleep_range(1000, 1500);
 132
 133         /* enable low-side LDO */
 134         ldoctl |= TWL6040_LSLDOENA;
 135         ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 136         if (ret)
 137                 goto lsldo_err;
 138         usleep_range(1000, 1500);
 139
 140         /* enable low-power PLL */
 141         lppllctl = TWL6040_LPLLENA;
 142         ret = twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
 143         if (ret)
 144                 goto lppll_err;
 145         usleep_range(5000, 5500);
 146
 147         /* disable internal oscillator */
 148         ldoctl &= ~TWL6040_OSCENA;
 149         ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 150         if (ret)
 151                 goto osc_err;
 152
 153         return 0;
 154
 155 osc_err:
 156         lppllctl &= ~TWL6040_LPLLENA;
 157         twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
 158 lppll_err:
 159         ldoctl &= ~TWL6040_LSLDOENA;
 160         twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 161 lsldo_err:
 162         ncpctl &= ~TWL6040_NCPENA;
 163         twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
 164 ncp_err:
 165         ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA);
 166         twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 167
 168         return ret;
 169 }
 170
 171 /* twl6040 manual power-down sequence */
 172 static void twl6040_power_down(struct twl6040 *twl6040)
 173 {
 174         u8 ncpctl, ldoctl, lppllctl;
 175
 176         ncpctl = twl6040_reg_read(twl6040, TWL6040_REG_NCPCTL);
 177         ldoctl = twl6040_reg_read(twl6040, TWL6040_REG_LDOCTL);
 178         lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
 179
 180         /* enable internal oscillator */
 181         ldoctl |= TWL6040_OSCENA;
 182         twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 183         usleep_range(1000, 1500);
 184
 185         /* disable low-power PLL */
 186         lppllctl &= ~TWL6040_LPLLENA;
 187         twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
 188
 189         /* disable low-side LDO */
 190         ldoctl &= ~TWL6040_LSLDOENA;
 191         twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 192
 193         /* disable negative charge pump */
 194         ncpctl &= ~TWL6040_NCPENA;
 195         twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
 196
 197         /* disable high-side LDO, reference system and internal oscillator */
 198         ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA);
 199         twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 200 }
 201
 202 static irqreturn_t twl6040_naudint_handler(int irq, void *data)
 203 {
 204         struct twl6040 *twl6040 = data;
 205         u8 intid, status;
 206
 207         intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID);
 208
 209         if (intid & TWL6040_READYINT)
 210                 complete(&twl6040->ready);
 211
 212         if (intid & TWL6040_THINT) {
 213                 status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
 214                 if (status & TWL6040_TSHUTDET) {
 215                         dev_warn(twl6040->dev,
 216                                  "Thermal shutdown, powering-off");
 217                         twl6040_power(twl6040, 0);
 218                 } else {
 219                         dev_warn(twl6040->dev,
 220                                  "Leaving thermal shutdown, powering-on");
 221                         twl6040_power(twl6040, 1);
 222                 }
 223         }
 224
 225         return IRQ_HANDLED;
 226 }
 227
 228 static int twl6040_power_up_completion(struct twl6040 *twl6040,
 229                                        int naudint)
 230 {
 231         int time_left;
 232         u8 intid;
 233
 234         time_left = wait_for_completion_timeout(&twl6040->ready,
 235                                                 msecs_to_jiffies(144));
 236         if (!time_left) {
 237                 intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID);
 238                 if (!(intid & TWL6040_READYINT)) {
 239                         dev_err(twl6040->dev,
 240                                 "timeout waiting for READYINT\n");
 241                         return -ETIMEDOUT;
 242                 }
 243         }
 244
 245         return 0;
 246 }
 247
 248 int twl6040_power(struct twl6040 *twl6040, int on)
 249 {
 250         int audpwron = twl6040->audpwron;
 251         int naudint = twl6040->irq;
 252         int ret = 0;
 253
 254         mutex_lock(&twl6040->mutex);
 255
 256         if (on) {
 257                 /* already powered-up */
 258                 if (twl6040->power_count++)
 259                         goto out;
 260
 261                 if (gpio_is_valid(audpwron)) {
 262                         /* use AUDPWRON line */
 263                         gpio_set_value(audpwron, 1);
 264                         /* wait for power-up completion */
 265                         ret = twl6040_power_up_completion(twl6040, naudint);
 266                         if (ret) {
 267                                 dev_err(twl6040->dev,
 268                                         "automatic power-down failed\n");
 269                                 twl6040->power_count = 0;
 270                                 goto out;
 271                         }
 272                 } else {
 273                         /* use manual power-up sequence */
 274                         ret = twl6040_power_up(twl6040);
 275                         if (ret) {
 276                                 dev_err(twl6040->dev,
 277                                         "manual power-up failed\n");
 278                                 twl6040->power_count = 0;
 279                                 goto out;
 280                         }
 281                 }
 282                 /* Default PLL configuration after power up */
 283                 twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;
 284                 twl6040->sysclk = 19200000;
 285         } else {
 286                 /* already powered-down */
 287                 if (!twl6040->power_count) {
 288                         dev_err(twl6040->dev,
 289                                 "device is already powered-off\n");
 290                         ret = -EPERM;
 291                         goto out;
 292                 }
 293
 294                 if (--twl6040->power_count)
 295                         goto out;
 296
 297                 if (gpio_is_valid(audpwron)) {
 298                         /* use AUDPWRON line */
 299                         gpio_set_value(audpwron, 0);
 300
 301                         /* power-down sequence latency */
 302                         usleep_range(500, 700);
 303                 } else {
 304                         /* use manual power-down sequence */
 305                         twl6040_power_down(twl6040);
 306                 }
 307                 twl6040->sysclk = 0;
 308         }
 309
 310 out:
 311         mutex_unlock(&twl6040->mutex);
 312         return ret;
 313 }
 314 EXPORT_SYMBOL(twl6040_power);
 315
 316 int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
 317                     unsigned int freq_in, unsigned int freq_out)
 318 {
 319         u8 hppllctl, lppllctl;
 320         int ret = 0;
 321
 322         mutex_lock(&twl6040->mutex);
 323
 324         hppllctl = twl6040_reg_read(twl6040, TWL6040_REG_HPPLLCTL);
 325         lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
 326
 327         switch (pll_id) {
 328         case TWL6040_SYSCLK_SEL_LPPLL:
 329                 /* low-power PLL divider */
 330                 switch (freq_out) {
 331                 case 17640000:
 332                         lppllctl |= TWL6040_LPLLFIN;
 333                         break;
 334                 case 19200000:
 335                         lppllctl &= ~TWL6040_LPLLFIN;
 336                         break;
 337                 default:
 338                         dev_err(twl6040->dev,
 339                                 "freq_out %d not supported\n", freq_out);
 340                         ret = -EINVAL;
 341                         goto pll_out;
 342                 }
 343                 twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
 344
 345                 switch (freq_in) {
 346                 case 32768:
 347                         lppllctl |= TWL6040_LPLLENA;
 348                         twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
 349                                           lppllctl);
 350                         mdelay(5);
 351                         lppllctl &= ~TWL6040_HPLLSEL;
 352                         twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
 353                                           lppllctl);
 354                         hppllctl &= ~TWL6040_HPLLENA;
 355                         twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
 356                                           hppllctl);
 357                         break;
 358                 default:
 359                         dev_err(twl6040->dev,
 360                                 "freq_in %d not supported\n", freq_in);
 361                         ret = -EINVAL;
 362                         goto pll_out;
 363                 }
 364                 break;
 365         case TWL6040_SYSCLK_SEL_HPPLL:
 366                 /* high-performance PLL can provide only 19.2 MHz */
 367                 if (freq_out != 19200000) {
 368                         dev_err(twl6040->dev,
 369                                 "freq_out %d not supported\n", freq_out);
 370                         ret = -EINVAL;
 371                         goto pll_out;
 372                 }
 373
 374                 hppllctl &= ~TWL6040_MCLK_MSK;
 375
 376                 switch (freq_in) {
 377                 case 12000000:
 378                         /* PLL enabled, active mode */
 379                         hppllctl |= TWL6040_MCLK_12000KHZ |
 380                                     TWL6040_HPLLENA;
 381                         break;
 382                 case 19200000:
 383                         /*
 384                          * PLL disabled
 385                          * (enable PLL if MCLK jitter quality
 386                          *  doesn't meet specification)
 387                          */
 388                         hppllctl |= TWL6040_MCLK_19200KHZ;
 389                         break;
 390                 case 26000000:
 391                         /* PLL enabled, active mode */
 392                         hppllctl |= TWL6040_MCLK_26000KHZ |
 393                                     TWL6040_HPLLENA;
 394                         break;
 395                 case 38400000:
 396                         /* PLL enabled, active mode */
 397                         hppllctl |= TWL6040_MCLK_38400KHZ |
 398                                     TWL6040_HPLLENA;
 399                         break;
 400                 default:
 401                         dev_err(twl6040->dev,
 402                                 "freq_in %d not supported\n", freq_in);
 403                         ret = -EINVAL;
 404                         goto pll_out;
 405                 }
 406
 407                 /* enable clock slicer to ensure input waveform is square */
 408                 hppllctl |= TWL6040_HPLLSQRENA;
 409
 410                 twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL, hppllctl);
 411                 usleep_range(500, 700);
 412                 lppllctl |= TWL6040_HPLLSEL;
 413                 twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
 414                 lppllctl &= ~TWL6040_LPLLENA;
 415                 twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
 416                 break;
 417         default:
 418                 dev_err(twl6040->dev, "unknown pll id %d\n", pll_id);
 419                 ret = -EINVAL;
 420                 goto pll_out;
 421         }
 422
 423         twl6040->sysclk = freq_out;
 424         twl6040->pll = pll_id;
 425
 426 pll_out:
 427         mutex_unlock(&twl6040->mutex);
 428         return ret;
 429 }
 430 EXPORT_SYMBOL(twl6040_set_pll);
 431
 432 int twl6040_get_pll(struct twl6040 *twl6040)
 433 {
 434         if (twl6040->power_count)
 435                 return twl6040->pll;
 436         else
 437                 return -ENODEV;
 438 }
 439 EXPORT_SYMBOL(twl6040_get_pll);
 440
 441 unsigned int twl6040_get_sysclk(struct twl6040 *twl6040)
 442 {
 443         return twl6040->sysclk;
 444 }
 445 EXPORT_SYMBOL(twl6040_get_sysclk);
 446
 447 static struct resource twl6040_vibra_rsrc[] = {
 448         {
 449                 .flags = IORESOURCE_IRQ,
 450         },
 451 };
 452
 453 static struct resource twl6040_codec_rsrc[] = {
 454         {
 455                 .flags = IORESOURCE_IRQ,
 456         },
 457 };
 458
 459 static int __devinit twl6040_probe(struct platform_device *pdev)
 460 {
 461         struct twl4030_audio_data *pdata = pdev->dev.platform_data;
 462         struct twl6040 *twl6040;
 463         struct mfd_cell *cell = NULL;
 464         int ret, children = 0;
 465
 466         if (!pdata) {
 467                 dev_err(&pdev->dev, "Platform data is missing\n");
 468                 return -EINVAL;
 469         }
 470
 471         /* In order to operate correctly we need valid interrupt config */
 472         if (!pdata->naudint_irq || !pdata->irq_base) {
 473                 dev_err(&pdev->dev, "Invalid IRQ configuration\n");
 474                 return -EINVAL;
 475         }
 476
 477         twl6040 = kzalloc(sizeof(struct twl6040), GFP_KERNEL);
 478         if (!twl6040)
 479                 return -ENOMEM;
 480
 481         platform_set_drvdata(pdev, twl6040);
 482
 483         twl6040->dev = &pdev->dev;
 484         twl6040->irq = pdata->naudint_irq;
 485         twl6040->irq_base = pdata->irq_base;
 486
 487         mutex_init(&twl6040->mutex);
 488         mutex_init(&twl6040->io_mutex);
 489         init_completion(&twl6040->ready);
 490
 491         twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
 492
 493         /* ERRATA: Automatic power-up is not possible in ES1.0 */
 494         if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0)
 495                 twl6040->audpwron = pdata->audpwron_gpio;
 496         else
 497                 twl6040->audpwron = -EINVAL;
 498
 499         if (gpio_is_valid(twl6040->audpwron)) {
 500                 ret = gpio_request(twl6040->audpwron, "audpwron");
 501                 if (ret)
 502                         goto gpio1_err;
 503
 504                 ret = gpio_direction_output(twl6040->audpwron, 0);
 505                 if (ret)
 506                         goto gpio2_err;
 507         }
 508
 509         /* codec interrupt */
 510         ret = twl6040_irq_init(twl6040);
 511         if (ret)
 512                 goto gpio2_err;
 513
 514         ret = request_threaded_irq(twl6040->irq_base + TWL6040_IRQ_READY,
 515                                    NULL, twl6040_naudint_handler, 0,
 516                                    "twl6040_irq_ready", twl6040);
 517         if (ret) {
 518                 dev_err(twl6040->dev, "READY IRQ request failed: %d\n",
 519                         ret);
 520                 goto irq_err;
 521         }
 522
 523         /* dual-access registers controlled by I2C only */
 524         twl6040_set_bits(twl6040, TWL6040_REG_ACCCTL, TWL6040_I2CSEL);
 525
 526         if (pdata->codec) {
 527                 int irq = twl6040->irq_base + TWL6040_IRQ_PLUG;
 528
 529                 cell = &twl6040->cells[children];
 530                 cell->name = "twl6040-codec";
 531                 twl6040_codec_rsrc[0].start = irq;
 532                 twl6040_codec_rsrc[0].end = irq;
 533                 cell->resources = twl6040_codec_rsrc;
 534                 cell->num_resources = ARRAY_SIZE(twl6040_codec_rsrc);
 535                 cell->platform_data = pdata->codec;
 536                 cell->pdata_size = sizeof(*pdata->codec);
 537                 children++;
 538         }
 539
 540         if (pdata->vibra) {
 541                 int irq = twl6040->irq_base + TWL6040_IRQ_VIB;
 542
 543                 cell = &twl6040->cells[children];
 544                 cell->name = "twl6040-vibra";
 545                 twl6040_vibra_rsrc[0].start = irq;
 546                 twl6040_vibra_rsrc[0].end = irq;
 547                 cell->resources = twl6040_vibra_rsrc;
 548                 cell->num_resources = ARRAY_SIZE(twl6040_vibra_rsrc);
 549
 550                 cell->platform_data = pdata->vibra;
 551                 cell->pdata_size = sizeof(*pdata->vibra);
 552                 children++;
 553         }
 554
 555         if (children) {
 556                 ret = mfd_add_devices(&pdev->dev, pdev->id, twl6040->cells,
 557                                       children, NULL, 0);
 558                 if (ret)
 559                         goto mfd_err;
 560         } else {
 561                 dev_err(&pdev->dev, "No platform data found for children\n");
 562                 ret = -ENODEV;
 563                 goto mfd_err;
 564         }
 565
 566         return 0;
 567
 568 mfd_err:
 569         free_irq(twl6040->irq_base + TWL6040_IRQ_READY, twl6040);
 570 irq_err:
 571         twl6040_irq_exit(twl6040);
 572 gpio2_err:
 573         if (gpio_is_valid(twl6040->audpwron))
 574                 gpio_free(twl6040->audpwron);
 575 gpio1_err:
 576         platform_set_drvdata(pdev, NULL);
 577         kfree(twl6040);
 578         return ret;
 579 }
 580
 581 static int __devexit twl6040_remove(struct platform_device *pdev)
 582 {
 583         struct twl6040 *twl6040 = platform_get_drvdata(pdev);
 584
 585         if (twl6040->power_count)
 586                 twl6040_power(twl6040, 0);
 587
 588         if (gpio_is_valid(twl6040->audpwron))
 589                 gpio_free(twl6040->audpwron);
 590
 591         free_irq(twl6040->irq_base + TWL6040_IRQ_READY, twl6040);
 592         twl6040_irq_exit(twl6040);
 593
 594         mfd_remove_devices(&pdev->dev);
 595         platform_set_drvdata(pdev, NULL);
 596         kfree(twl6040);
 597
 598         return 0;
 599 }
 600
 601 static struct platform_driver twl6040_driver = {
 602         .probe          = twl6040_probe,
 603         .remove         = __devexit_p(twl6040_remove),
 604         .driver         = {
 605                 .owner  = THIS_MODULE,
 606                 .name   = "twl6040",
 607         },
 608 };
 609
 610 static int __devinit twl6040_init(void)
 611 {
 612         return platform_driver_register(&twl6040_driver);
 613 }
 614 module_init(twl6040_init);
 615
 616 static void __devexit twl6040_exit(void)
 617 {
 618         platform_driver_unregister(&twl6040_driver);
 619 }
 620
 621 module_exit(twl6040_exit);
 622
 623 MODULE_DESCRIPTION("TWL6040 MFD");
 624 MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");
 625 MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>");
 626 MODULE_LICENSE("GPL");
 627 MODULE_ALIAS("platform:twl6040");