staging: msm/lcdc.c: Convert IS_ERR result to PTR_ERR
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / pcmcia / xxs1500_ss.c
blob3b67a1b6a1972670c5c305c94b64c8677a720fb8
1 /*
2 * PCMCIA socket code for the MyCable XXS1500 system.
4 * Copyright (c) 2009 Manuel Lauss <manuel.lauss@gmail.com>
6 */
8 #include <linux/delay.h>
9 #include <linux/gpio.h>
10 #include <linux/interrupt.h>
11 #include <linux/io.h>
12 #include <linux/ioport.h>
13 #include <linux/mm.h>
14 #include <linux/platform_device.h>
15 #include <linux/pm.h>
16 #include <linux/resource.h>
17 #include <linux/slab.h>
18 #include <linux/spinlock.h>
20 #include <pcmcia/ss.h>
21 #include <pcmcia/cistpl.h>
23 #include <asm/irq.h>
24 #include <asm/system.h>
25 #include <asm/mach-au1x00/au1000.h>
27 #define MEM_MAP_SIZE 0x400000
28 #define IO_MAP_SIZE 0x1000
32 * 3.3V cards only; all interfacing is done via gpios:
34 * 0/1: carddetect (00 = card present, xx = huh)
35 * 4: card irq
36 * 204: reset (high-act)
37 * 205: buffer enable (low-act)
38 * 208/209: card voltage key (00,01,10,11)
39 * 210: battwarn
40 * 211: batdead
41 * 214: power (low-act)
43 #define GPIO_CDA 0
44 #define GPIO_CDB 1
45 #define GPIO_CARDIRQ 4
46 #define GPIO_RESET 204
47 #define GPIO_OUTEN 205
48 #define GPIO_VSL 208
49 #define GPIO_VSH 209
50 #define GPIO_BATTDEAD 210
51 #define GPIO_BATTWARN 211
52 #define GPIO_POWER 214
54 struct xxs1500_pcmcia_sock {
55 struct pcmcia_socket socket;
56 void *virt_io;
58 phys_addr_t phys_io;
59 phys_addr_t phys_attr;
60 phys_addr_t phys_mem;
62 /* previous flags for set_socket() */
63 unsigned int old_flags;
66 #define to_xxs_socket(x) container_of(x, struct xxs1500_pcmcia_sock, socket)
68 static irqreturn_t cdirq(int irq, void *data)
70 struct xxs1500_pcmcia_sock *sock = data;
72 pcmcia_parse_events(&sock->socket, SS_DETECT);
74 return IRQ_HANDLED;
77 static int xxs1500_pcmcia_configure(struct pcmcia_socket *skt,
78 struct socket_state_t *state)
80 struct xxs1500_pcmcia_sock *sock = to_xxs_socket(skt);
81 unsigned int changed;
83 /* power control */
84 switch (state->Vcc) {
85 case 0:
86 gpio_set_value(GPIO_POWER, 1); /* power off */
87 break;
88 case 33:
89 gpio_set_value(GPIO_POWER, 0); /* power on */
90 break;
91 case 50:
92 default:
93 return -EINVAL;
96 changed = state->flags ^ sock->old_flags;
98 if (changed & SS_RESET) {
99 if (state->flags & SS_RESET) {
100 gpio_set_value(GPIO_RESET, 1); /* assert reset */
101 gpio_set_value(GPIO_OUTEN, 1); /* buffers off */
102 } else {
103 gpio_set_value(GPIO_RESET, 0); /* deassert reset */
104 gpio_set_value(GPIO_OUTEN, 0); /* buffers on */
105 msleep(500);
109 sock->old_flags = state->flags;
111 return 0;
114 static int xxs1500_pcmcia_get_status(struct pcmcia_socket *skt,
115 unsigned int *value)
117 unsigned int status;
118 int i;
120 status = 0;
122 /* check carddetects: GPIO[0:1] must both be low */
123 if (!gpio_get_value(GPIO_CDA) && !gpio_get_value(GPIO_CDB))
124 status |= SS_DETECT;
126 /* determine card voltage: GPIO[208:209] binary value */
127 i = (!!gpio_get_value(GPIO_VSL)) | ((!!gpio_get_value(GPIO_VSH)) << 1);
129 switch (i) {
130 case 0:
131 case 1:
132 case 2:
133 status |= SS_3VCARD; /* 3V card */
134 break;
135 case 3: /* 5V card, unsupported */
136 default:
137 status |= SS_XVCARD; /* treated as unsupported in core */
140 /* GPIO214: low active power switch */
141 status |= gpio_get_value(GPIO_POWER) ? 0 : SS_POWERON;
143 /* GPIO204: high-active reset line */
144 status |= gpio_get_value(GPIO_RESET) ? SS_RESET : SS_READY;
146 /* other stuff */
147 status |= gpio_get_value(GPIO_BATTDEAD) ? 0 : SS_BATDEAD;
148 status |= gpio_get_value(GPIO_BATTWARN) ? 0 : SS_BATWARN;
150 *value = status;
152 return 0;
155 static int xxs1500_pcmcia_sock_init(struct pcmcia_socket *skt)
157 gpio_direction_input(GPIO_CDA);
158 gpio_direction_input(GPIO_CDB);
159 gpio_direction_input(GPIO_VSL);
160 gpio_direction_input(GPIO_VSH);
161 gpio_direction_input(GPIO_BATTDEAD);
162 gpio_direction_input(GPIO_BATTWARN);
163 gpio_direction_output(GPIO_RESET, 1); /* assert reset */
164 gpio_direction_output(GPIO_OUTEN, 1); /* disable buffers */
165 gpio_direction_output(GPIO_POWER, 1); /* power off */
167 return 0;
170 static int xxs1500_pcmcia_sock_suspend(struct pcmcia_socket *skt)
172 return 0;
175 static int au1x00_pcmcia_set_io_map(struct pcmcia_socket *skt,
176 struct pccard_io_map *map)
178 struct xxs1500_pcmcia_sock *sock = to_xxs_socket(skt);
180 map->start = (u32)sock->virt_io;
181 map->stop = map->start + IO_MAP_SIZE;
183 return 0;
186 static int au1x00_pcmcia_set_mem_map(struct pcmcia_socket *skt,
187 struct pccard_mem_map *map)
189 struct xxs1500_pcmcia_sock *sock = to_xxs_socket(skt);
191 if (map->flags & MAP_ATTRIB)
192 map->static_start = sock->phys_attr + map->card_start;
193 else
194 map->static_start = sock->phys_mem + map->card_start;
196 return 0;
199 static struct pccard_operations xxs1500_pcmcia_operations = {
200 .init = xxs1500_pcmcia_sock_init,
201 .suspend = xxs1500_pcmcia_sock_suspend,
202 .get_status = xxs1500_pcmcia_get_status,
203 .set_socket = xxs1500_pcmcia_configure,
204 .set_io_map = au1x00_pcmcia_set_io_map,
205 .set_mem_map = au1x00_pcmcia_set_mem_map,
208 static int __devinit xxs1500_pcmcia_probe(struct platform_device *pdev)
210 struct xxs1500_pcmcia_sock *sock;
211 struct resource *r;
212 int ret, irq;
214 sock = kzalloc(sizeof(struct xxs1500_pcmcia_sock), GFP_KERNEL);
215 if (!sock)
216 return -ENOMEM;
218 ret = -ENODEV;
220 /* 36bit PCMCIA Attribute area address */
221 r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-attr");
222 if (!r) {
223 dev_err(&pdev->dev, "missing 'pcmcia-attr' resource!\n");
224 goto out0;
226 sock->phys_attr = r->start;
228 /* 36bit PCMCIA Memory area address */
229 r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-mem");
230 if (!r) {
231 dev_err(&pdev->dev, "missing 'pcmcia-mem' resource!\n");
232 goto out0;
234 sock->phys_mem = r->start;
236 /* 36bit PCMCIA IO area address */
237 r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-io");
238 if (!r) {
239 dev_err(&pdev->dev, "missing 'pcmcia-io' resource!\n");
240 goto out0;
242 sock->phys_io = r->start;
246 * PCMCIA client drivers use the inb/outb macros to access
247 * the IO registers. Since mips_io_port_base is added
248 * to the access address of the mips implementation of
249 * inb/outb, we need to subtract it here because we want
250 * to access the I/O or MEM address directly, without
251 * going through this "mips_io_port_base" mechanism.
253 sock->virt_io = (void *)(ioremap(sock->phys_io, IO_MAP_SIZE) -
254 mips_io_port_base);
256 if (!sock->virt_io) {
257 dev_err(&pdev->dev, "cannot remap IO area\n");
258 ret = -ENOMEM;
259 goto out0;
262 sock->socket.ops = &xxs1500_pcmcia_operations;
263 sock->socket.owner = THIS_MODULE;
264 sock->socket.pci_irq = gpio_to_irq(GPIO_CARDIRQ);
265 sock->socket.features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
266 sock->socket.map_size = MEM_MAP_SIZE;
267 sock->socket.io_offset = (unsigned long)sock->virt_io;
268 sock->socket.dev.parent = &pdev->dev;
269 sock->socket.resource_ops = &pccard_static_ops;
271 platform_set_drvdata(pdev, sock);
273 /* setup carddetect irq: use one of the 2 GPIOs as an
274 * edge detector.
276 irq = gpio_to_irq(GPIO_CDA);
277 set_irq_type(irq, IRQ_TYPE_EDGE_BOTH);
278 ret = request_irq(irq, cdirq, 0, "pcmcia_carddetect", sock);
279 if (ret) {
280 dev_err(&pdev->dev, "cannot setup cd irq\n");
281 goto out1;
284 ret = pcmcia_register_socket(&sock->socket);
285 if (ret) {
286 dev_err(&pdev->dev, "failed to register\n");
287 goto out2;
290 printk(KERN_INFO "MyCable XXS1500 PCMCIA socket services\n");
292 return 0;
294 out2:
295 free_irq(gpio_to_irq(GPIO_CDA), sock);
296 out1:
297 iounmap((void *)(sock->virt_io + (u32)mips_io_port_base));
298 out0:
299 kfree(sock);
300 return ret;
303 static int __devexit xxs1500_pcmcia_remove(struct platform_device *pdev)
305 struct xxs1500_pcmcia_sock *sock = platform_get_drvdata(pdev);
307 pcmcia_unregister_socket(&sock->socket);
308 free_irq(gpio_to_irq(GPIO_CDA), sock);
309 iounmap((void *)(sock->virt_io + (u32)mips_io_port_base));
310 kfree(sock);
312 return 0;
315 static struct platform_driver xxs1500_pcmcia_socket_driver = {
316 .driver = {
317 .name = "xxs1500_pcmcia",
318 .owner = THIS_MODULE,
320 .probe = xxs1500_pcmcia_probe,
321 .remove = __devexit_p(xxs1500_pcmcia_remove),
324 int __init xxs1500_pcmcia_socket_load(void)
326 return platform_driver_register(&xxs1500_pcmcia_socket_driver);
329 void __exit xxs1500_pcmcia_socket_unload(void)
331 platform_driver_unregister(&xxs1500_pcmcia_socket_driver);
334 module_init(xxs1500_pcmcia_socket_load);
335 module_exit(xxs1500_pcmcia_socket_unload);
337 MODULE_LICENSE("GPL");
338 MODULE_DESCRIPTION("PCMCIA Socket Services for MyCable XXS1500 systems");
339 MODULE_AUTHOR("Manuel Lauss");